Quick Start Guide

MySlingStudio.com 1 Connect the Power Supply Connect the power supply to the SlingStudio™ Hub. The blue LED band blinks for up to two minutes while it is starting up. Wait until it stops blinking and glows steadily before proceeding.

< 2 min.

Optional: POWER Connect the included HDMI cable from the mini-HDMI output on the hub to the HDMI input

USB-C port on your TV or video-

HDMI monitoring display. IN

HDMI OUT

LINE IN

POWER

2 Get the App Download the SlingStudio Console app on your iPad or Mac, then follow the on-screen instructions to set it up.

Download on MySlingStudio.com

MySlingStudio.com/downloads 3 Set Up Your Cameras You can connect up to 10 camera sources simultaneously and actively monitor, switch and record four of them. Here are some examples: •• Camera, camcorder or drone via HDMI – Connect the camera’s HDMI output to the standard HDMI input of the SlingStudio Hub. •• iPhone or Android smartphone – Download the SlingStudio Capture app on your smartphone and use it to connect wirelessly to SlingStudio. •• Camera, camcorder or drone via Wi-Fi – Connect an HDMI camera or camcorder to SlingStudio via Wi-Fi by using the SlingStudio CameraLink (sold separately).

Please note: •• For recording, SlingStudio requires a UHS Speed Class 3 SD card, a USB-C external hard drive (EHD) or solid- state drive (SSD), or a USB 3.0 EHD or SSD connected to the SlingStudio SD USB-C Expander (sold separately). Visit MySlingStudio.com/compatibility SD card slot location INTERNET to see if your device is supported. REC •• When using the SlingStudio Hub SD without a power cord, the SlingStudio Battery (sold separately) is required.

For more details, go to: MySlingStudio.com/SlingStudio IMPORTANT SAFETY INSTRUCTIONS Read and understand all operating instructions prior to use. Keep this document for future reference.

Do not immerse the product in water or expose it to rain, moisture, dripping, or splashing.

Only connect the original power adapter. Other power adapters may damage the circuitry and cause a fire risk.

The power adapter gets warm when in use. Place it in an open, well-ventilated area and do not cover it.

The power adapter must only be used indoors. To use SlingStudio outdoors, power it from the dedicated rechargeable SlingStudio Battery (sold separately).

Do not use other sources of battery power. Only use the designated SlingStudio Battery that is specifically for use with SlingStudio.

Install and operate SlingStudio with a minimum separation distance of 20cm between it and all persons to maintain electromagnetic field exposure within permitted limits.

Keep the product, plastic packaging, and small parts away from babies and children.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Warranty, safety, regulatory and legal information can be found at MySlingStudio.com/legal.

215037