Professional Tools & Accessories
Total Page:16
File Type:pdf, Size:1020Kb
Professional Tools & Accessories Automotive | Commercial | Residential Paint Protection | Wraps | Vinyl & Graphics CONTENTS KNIVES & BLADES INSTALLATION ACCESSORIES 1 20 SCRAPERS & BLADES MEASURE/MARK & TRIM 4 22 HANDLED SQUEEGEES SPRAYERS & ACCESSORIES 6 23 SQUEEGEE ESSENTIALS CLEANING/PREP & CHEMICALS 11 24 PPF/WRAPS/VINYL & GRAPHICS SLITTERS & ACCESSORIES 14 26 HARD CARDS METERS 17 27 TUBE SQUEEGEES 18 KNIVES & BLADES STANDARD 9MM KNIVES GT126 OLFA “SILVER” SS KNIFE GT027 NT PRO A1 “RED DOT” KNIFE GT226 OLFA “SILVER 2” KNIFE The original Olfa stainless steel knife. Regarded by many installers as the Significantly improved over the original KNIVES & BLADES finest professional knife available. “Olfa Silver”. Features right or left The blade can be advanced in 1/2 handuse, blade position auto-lock, segment increments for precision and one-segment click-action. control. Right or left hand use. Now includes a stainless steel blade. GT127 OLFA A1 KNIFE GT227 OLFA XA1 ERGONOMIC KNIFE GT1018 NT A250RP AUTO-LOCK KNIFE Used for film pattern cutting and This ergonomically correct knife Chemical-resistant and heat-resistant trimming. Features a molded plastic features a comfortable rubber grip for polypropylene grip. Ratchet auto- handle for maximum control and better control and less fatigue. lock slider locks blade in place while comfort. Right or left hand use. cutting. Right or left hand use. GT1054 NT A300GR KNIFE GT124 PLASTIC UTILITY KNIFE All-purpose standard duty utility knife Used for film pattern cutting and with stainless steel sliding holder and trimming. sturdy aluminum die cast grip for long lasting use. Ratchet auto-lock slider locks blade in place while cutting. End cap also functions as a blade snapper. Designed for either left or right handed use with simple reversal of blade. MULTI-BLADE CARTRIDGE KNIVES GT026N NT A553P INJECTOR GT984 NT A1000RP KNIFE GT114 OLFA PA2 PRO-LOAD KNIFE CARTRIDGE KNIFE Cartridge cutter with aluminum die- Holds up to five blades at a time Now comes with two 30 cast grip. Cartridge holds up to 5 giving you 65 new cutting segments degree blades installed but will blades. per load. accommodate standard 9mm blades as well. Used for film pattern cutting and trimming. Holds up to five blades for automatic blade replacement capabilities. NOTE All knives are packed with a carbon steel blade except the GT126, GT226 & GT027 which include a stainless steel blade. 1 KNIVES & BLADES CONT’D STANDARD 9MM BLADES GT115 GT123 GT1031 GT116 KNIVES & BLADES GT115 OLFA AB10S STAINLESS GT123 OLFA AB50B CARBON GT1020 NT BA50SS STAINLESS STEEL SNAP BLADES SNAP BLADES STEEL SNAP BLADES Pack of 10. The industry standard Standard carbon snap blades Stainless steel snap blades from the when it comes to snap blades for with superior sharpness and edge makers of the “Red Dot” knife. Use in film and pattern cutting. Thirteen retention. This 9mm blade fits most 9mm and multi-blade cartridge knives. cutting edges per blade. Use in most standard duty knives and has 13 Pack of 50. standard duty knives cutting edges per blade. Pack of 50. GT116 OLFA AB50S STAINLESS GT1031 OLFA ULTRAMAX ABB50B STEEL SNAP BLADES CARBON SNAP BLADES Pack of 50. These blades are double-honed for extreme sharpness and are 25% sharper than the standard duty carbon blade. Eight cutting edges per blade, 50 blades per pack. Fits most standard Olfa knives. 30° KNIFE & BLADES GT1051 OLFA SAC1 KNIFE GT1052 OLFA A1160B 30° GT2100 BAD21P 30° BLADE 10PK Slim stainless steel body with a 30° CARBON BLADES NT BAD-21P 30° blade. 10 blades per angle blade for precision in pattern Standard duty acute angle snap-off pack, Carbon. Fits GT1051, GT026N cutting. Great for graphics and paint blade for use when precision is a must. and GT027. protection. Use GT1052 or GT2100 Seven cutting edges per blade strip. replacement blades. Pack of 10. 2 KNIVES & BLADES CONT’D 8PT HEAVY-DUTY KNIVES & BLADES GT264 KDS L22 GRIPFIT GT1019 NT L500GRP KNIFE GT111 8PT AUTO LOCK KNIFE AUTOLOCK KNIFE NT heavy-duty knife with ratchet auto- Heavy-duty knife with breakaway KNIVES & BLADES Heavy-duty knife with comfortable lock slider which locks the blade into points for use with security films 7 mil or grip. Use with any 8pt blade to cut place while cutting. Blade storage in greater. Blade storage in handle. window films 7 mil or greater. handle. Use with 7 mil or greater films. GT263 GT2016 GT263 KDS LB50BH POWER BLACK GT131 8PT BLADES GT112 OLFA LBB50B ULTRAMAX 8PT BLADES 18mm replacement blades. Fits GT111, 8PT BLADES Ideal for thicker films, 7 mil or greater. GT264 and GT1019. Pack of 5. Replacement blades for GT111, GT264 Fits GT111, GT264 & GT1019. Pack of 50. & GT1019 heavy-duty knives. Triple- honed for extremely sharp edge. Ideal GT2016 KDS GB50BH POWER BLACK for cutting thick films, 7 mil or greater. G-BLADES Pack of 50. The G-Blade is a double-honed extremely sharp 8pt blade that is ideal for cutting safety and security film. Fits GT111, GT264, & GT1019. Pack of 50. TOOL TIP Try the most popular knife and blade option for the various applications: - Automotive/Residential Window Films use GT126/GT027 (pg. 1) and GT116/ GT1020 (pg. 2) GT1021 BL50P BLADES -Paint Protection use GT1051 and GT1052 (pg. 2) Heavy-duty NT blades for use with the GT1019, GT111, & GT264. Pack of 50. -Vinyl Graphics use GT026N/GT114 (pg. 1) and GT123 (pg. 2) -Safety and Security Films use GT1019 (pg. 3) and GT112 (pg. 3) ANY BLADE CAN CUT OR SCRATCH GLASS! It depends on the glass, edge of the blade and the angle of the cut. No matter what knife or blade you use, be sure to use a SHARP blade every time! 3 SCRAPERS & BLADES 6” SCRAPERS & BLADES GT107 6” TRIUMPH SCRAPER GT107A 6” ANGLED TRIUMPH SCRAPER GT107PC 6” TRIUMPH SCRAPER WITH SCRAPERS & BLADES Lightweight and maneuverable. The handle is tilted at a 30° angle. SLIDE COVER Includes cover and one double Includes cover and one double This is the new and improved version edged blade edged blade. of the slide covered Triumph. With a bigger button and smoother action, the cover easily opens and closes with no hassle. No more fumbling with a separate blade cover while doing ladder work. Great for regular window cleaning, but not recommended for stripping off old film. GT106 GT110 GT983 6” ERGONOMIC GT983A 6” ANGLED ERGONOMIC GT106 6” RED HEAVY-DUTY TRIUMPH SCRAPER TRIUMPH SCRAPER Scraper ideal for film removal. Includes An improved version of the angled An improved version of the standard cover and one double edged blade. 6” Triumph scraper with a more 6” Triumph scraper with a more Use GT110 as replacement blades. comfortable grip. Includes cover and comfortable grip and tilted handle. one double edged blade. Includes cover and one double GT110 TRIUMPH HEAVY-DUTY edged blade. CARBON BLADES Replacement blades for the Red Heavy-Duty Triumph Scraper (GT106). This thicker blade (0.40 mm) offers greater strength for those tough jobs. Pack of 10. GT108 6” TRIUMPH CARBON BLADES GT108SS 6” TRIUMPH STAINLESS GT108SS-HD 6” TRIUMPH STAINLESS Carbon steel offers strong capable STEEL BLADES STEEL HEAVY-DUTY BLADES scraping that lasts longer than stainless Long lasting rust resistant stainless steel This rust resistant stainless steel blade steel blades but rust more easily. Use blade. Perfect for removing adhesive is thicker and stronger than the these blades for scraping adhesive and other debris from glass surfaces. standard 6” Triumph Stainless Steel and other debris from glass surfaces. The double edge blade offers you Blades. A must have for those tough Double edged for more scraping per more scraping than other blades. film removal jobs. A new product package. These blades fit any of the (0.15 mm x 6”) Pack of 25. exclusively for the tinting industry. standard 6” Triumph Scrapers. (0.20 A must have for all residential and mm x 6”) Pack of 25. commercial installers. (0.20 mm x 6”) Pack of 25. NOTE All scrapers are packaged with a carbon blade. 4 SCRAPERS & BLADES CONT’D 4” SCRAPERS & BLADES GT105 GT1007 GT104 4” SCRAPER WITH GT1023 AL PRO 4” STRIPPER GT105 4” CARBON SCRAPER BLADES EXTENDED HANDLE This 4” scraper has an adjustable head Fits the GT104 and GT1023. (0.017mm x 4” scraper with extended handle as well as an adjustable knob for two 4”) Pack of 10. allowing for better leverage. Use with handed use. Blades can be stored SCRAPERS & BLADES GT105 or GT1007 as replacement inside the handle. GT1007 4” CARBON SCRAPER BLADES blades. Blade cover included. Fits the GT104 and GT1023. (0.017mm x 4”) Pack of 100. 3” SCRAPERS & BLADES TOOL TIP Plastic razor blades are the most effective way to safely prep automotive glass. Although the blades are plastic, proceeding with GT210 3” TRIUMPH SCRAPER GT211 3” TRIUMPH CARBON BLADES caution is always a good idea. Smaller version of the regular Triumph. Use in 3” Triumph Scraper (GT210). Designed to fit perfectly into corners. (0.20 mm x 3”) Pack of 10. 1” SCRAPERS & BLADES GT138 GT212 GT109 GT109S GT138HYDE GT994 GT109 1” CLIP SCRAPER GT138 HEAVY-DUTY 1” RAZOR SCRAPER GT212 1” NEON MINI SCRAPER GT109S 1” CLIP SCRAPER WITH GT138HYDE HYDE 1” RAZOR SCRAPER Holds 1” single edge blade. THUMB SCREW Retractable safety scraper; Use with GT140, GT140-12 & GT137. These effective scrapers will intermediate blade position keeps the accommodate standard or stainless blade from sliding out while in use. GT994 BIG BLADE steel 1” single edge blades as well as Jumbo size plastic razor blade perfect GT139 plastic razor blades. Try the Lil for cleaning & film removal. Chizler in these handles for (3” x 4”) more leverage.