non corrupt windows 8.1 iso download Fix: The Disc Image File is Corrupted on . The ‘ Disc image file is corrupted ’ error is typically caused by the third-party application that you are using to mount the ISO file, or damaged system files. Users have reported that when they try to mount an ISO image file using a third-party application like PowerISO or Windows Explorer, they are prompted with the said error. ISO files are often used to store Windows installation images or any other application. This error should not be overlooked as it can, sometimes, refer to a malfunctioning system. The error is most of the times resolved by applying a few plain solutions, however, if your issue persists even after applying the solutions given below, you will have to download the ISO image file again. You can solve your issue by following the solutions mentioned below. What causes the ‘The Disc Image File is Corrupted’ Error on Windows 10? As we mentioned, the causes of the error are often the following factors — Third-party application . The third-party application that you are using to mount the ISO image file can be sometimes the cause of the issue. System files corruption . Another factor that can cause the issue would be system files corruption. In such a case, you will have to use Windows built-in utilities to try to fix the issues. With that out of the way, you can isolate the error by implementing the following solutions. Please follow the given solutions in the same order as mentioned to ensure a hasty resolution. Solution 1: Repair the Third-party Application. If you are using a third-party application like PowerISO etc. to mount the ISO image file, the software itself can be the cause of the issue, times. This happens when the third-party application didn’t install smoothly and was interrupted during the installation process. In such a case, you will have to repair the application to see if it fixes the issue. Here’s how to do it: Go to the Menu and open up the . Go to Programs and Features . Afterward, locate the third-party application that you are using and highlight it . Lastly, click the Repair option on the top of the list. Repairing the Third-Party Application Wait for it to complete. Solution 2: Uninstall the Third-Party Application. Another way of fixing your issue would be to uninstall the third-party application that you are using and use Windows Explorer to mount the ISO image file. Here’s how to uninstall the program: Open up the Control Panel and go to Program and Features . Programs and Features – Control Panel Locate the third-party application and double-click it to uninstall. Follow the prompts to uninstall the program. Once you have uninstalled the third-party application, you can mount the ISO image file using the Windows Explorer. This is pretty easy to do, just navigate to the directory where the ISO image file is, right-click on it, your cursor to the ‘ Open with ‘ option and, finally, select Windows Explorer. Solution 3: Use a Different Software. Sometimes, repairing the third-party application might not work for you. It is also possible that you won’t be able to see the Repair option once you highlight the third-party application in the Control Panel. This is because the application had installed successfully and doesn’t need repairing. In such a case, you will have to use a different ISO mounting software. There are tons of software out there for the sole purpose of mounting ISO files. You can easily them via a simple search on Google. Solution 4: Repair Corrupt System Files. If your system files are corrupt or damaged, they can cause the error to pop up. In such a case, you will have to use Windows built-in utilities to repair the corrupt system files. System File Checker (SFC) and Deployment Image Servicing and Management (DISM) are Windows built-in utilities that scan your system for any damaged files and then repair them using a backup . To learn how to use these utilities, please refer to the articles linked below. SFC DISM. Solution 5: Download the ISO File Again. If the above solutions have failed to work out for you, this means the ISO image file that you have downloaded either hasn’t downloaded properly or is corrupt, to begin with. Therefore, in such a scenario, you will have to download the ISO file again and see if it fixes your issue. Non corrupt windows 8.1 iso download. Recently my computer has begun having issues starting up. It crashes on boot up once, then fires up very slowly the second . The computer as is experiences no issues other than start up. The error in shows up as: The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0x0000000000000000, 0xffffd00020f73878, 0xffffd00020f73080). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 101316-79843-01. From there I did some research and the conclusion I have been lead to believe is that there is a slew of system files that are corrupted. I attempted a sfc /scannow from admin, it found corrupt files but failed failed to fix the corrupt files. Which proves the issue. From there I attempted a advanced fix: DISM /Online /Cleanup-Image /RestoreHealth, which failed. Its error text was to simply check the log, which is unnatural from what I have seen in the past. I'd like to upload my dsm log as well as possibly my memory.dmp, but I do not see anywhere to attach files here. I am a little bit lost where to go from here, I am currently backing everything up to the cloud in case I have to do a revert to the base install. What are my next steps? I understand that some of you will tell me that I should upgrade to windows 10, but that is not an option as my hardware is not supported for win 10. Edit: I did some other checks, found out my issue may be from a failed update. I used the Troubleshooter to fix that issue, I am attempting to reinstall the failed updates, and see if that is the cause of my file corruption. Edit2: Still slowly redownloading the updates. While waiting I ran DISM /Online /Cleanup-Image /StartComponetCleanup. Which completed no issue, then I began another sfc /scannow. It completed, however it gave me the error "Windows Resource Protection could not preform the requested operation. The resources I've found say that a common cause is hard drive failure as well as bad sectors. Currently testing hard drive sectors via HD Tune Pro, over half completed and no damaged sectors so far. Edit3: HD Tune came back with no bad sectors, and all drives were healthy. Also ran a ram test as well since it was there, came back all functional. The updates went smooth. No issue on restart after the updates. Just running /scannow to make sure that all corruptions are cleaned up. Edit4: scan now stated it found corrupt files, but was unable to fix them. DISM came back with Error 0x800f0906 Source files could not be downloaded. Points me to the instructions @ https://technet.microsoft.com/en-us/library/hh825020.aspx. Not really digesting what to do at this point. Any direction would be nice. winload.efi missing or corrupt: Fix for , 8. Get the fix for the error winload.efi is missing or corrupt on Windows 7 , Windows 8 or Windows 8.1 . About “ winload.efi is missing or corrupt “ The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations. Description and Symptoms. The error messages, alerts, warnings, and symptoms below are tied to this error. Symptom 1: “ winload.efi is missing or corrupt ” error screen on startup. If the error screen mentions winload.exe and not winload.efi , go to Fix: winload.exe is missing or corrupt. Other common winload.efi related error messages can be any of the following, depending on your Windows versions: winload.efi cannot be found winload.efi is missing winload.efi is missing or contains errors This program can’t start because winload.efi is missing from your computer There was a problem starting []\winload.efi. The specified module could not be found.” This application requires the file winload.efi, which was not found on this system. The error code can be different from computer to computer, but the File: row mentions the winload.efi file at the \windows\system32\ folder: The winload.efi error can have different error codes, such as Error code: 0xc0000225 or Error code: 0xc0000001 or any other, but File always mentions the file as being winload.efi. Here’s how the winload.efi error with the 0xc0000225 code looks on Windows 8/8.1 systems: On a Windows 7 computer the error screen looks like this: Causes of this Error. This error has been known to occur as a result of one of the following causes: Cause 1: The winload.efi file is corrupt or missing. Failed Windows Updates or Automatic Updates to Windows that involve an upgrade of critical system files (especially service pack installations) that update winload.efi may result in this error. Alternatively, this may happen because of hardware failure. Cause 2: integrity compromised. The hard drive’s file system may become damaged because of disk write errors, power outages or virus attacks. If that’s the case, the cannot find winload.efi to boot properly and the loading process is halted. Fix winload.efi error with Easy Recovery Essentials. Easy Recovery Essentials is guaranteed to fix the “winload.efi error” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC. . Make sure to note your Windows version (XP, Vista, 7 or 8) before you download EasyRE. This guide can you identify what version of Windows you have installed. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive. Boot up your PC from the Easy Recovery Essentials CD or USB you created. Once EasyRE is running, choose the “Automated Repair” option and click Continue . Choose “Automated Repair” in Easy Recovery Essentials. Choose the drive associated with the Windows installation you’re trying to repair. Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation. Windows, booting up successfully. You can download Easy Recovery Essentials from here. Fix winload.efi missing or corrupt in Windows 7. Windows Setup CD/DVD Required! Some of the solutions below require the use of the Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below. Fix #1: Rebuild the BCD. You can try to rebuild the BCD if the winload.efi error appears because of a corrupt BCD file: Insert the installation disc Restart your computer and boot from the disc Click Repair your computer At the System Recovery Options screen, select Command Prompt Run the following commands: Press Enter after each and wait for the commands to finish Restart your computer. bootrec utility results screen. If the above bootrec commands didn’t worked, try running the same commands 3 more times before proceeding to Fix #2 below. If you don’t have the installation disc, you can check if your system has the system recovery tools installed on the hard disk to access Command Prompt. To do so, follow these steps: Restart your computer Press F8 as soon as your computer boots. Make sure you don’t have any media in your drives (CDs, DVDs etc) At the Advanced Boot Options screen, select Repair your computer Press Enter Your computer should now boot into the System Recovery Options screen. Fix #2: Run and sfc. To run the chkdsk or sfc commands, follow these steps: Insert the installation DVD Restart the computer Boot from the DVD by pressing any key whenever the “Press any key” message appears At the Install Windows screen, click Repair your computer or press R Select Command Prompt Enter the chkdsk command: chkdsk utility results screen. If the chkdsk utility doesn’t fix the winload.efi error, try running the sfc utility instead: At Command Prompt, the sfc command: Press Enter. sfc utility results screen. Fix #3: Disable secure boot. If you happen to have Windows 7 installed on a computer with UEFI and not BIOS, you can try to disable the Secure Boot option found in the UEFI boot options menu. This might fix the winload.efi error: For more information on how to disable Secure Boot, follow the Disabling Secure Boot Guide. Boot into UEFI as soon as you boot the computer.Depending on your computer manufacturer, the key to boot into UEF menu can be F2 or F8 or F12 or or Esc .If none of the above keys work for your system, boot your computer and find the key you need to press listed on the first screen that appears on your monitor. Depending on your computer manufacturer, the UEFI boot menu can look different. Look for a Secure Boot option. This is usually found in a Boot or a Security or a Authentication tab listed in the menu. Once you’ve found the Secure Boot option, make sure it’s Disabled or Off . Save the changes and the UEFI menu Restart your computer. Fix winload.efi missing or corrupt in Windows 8. Fix #1: Disable Secure Boot. In most cases the winload.efi missing or corrupt error can disappear if the Secure Boot option is Disabled or Off in the UEFI boot menu. For more information on how to disable Secure Boot, follow the Disabling Secure Boot Guide. Restart your computer Press the necessary key to boot into your system’s UEFI menu. Depending on your computer manufacturer (HP, Acer, Asus etc.), the key can be F2 , F8 , Esc or Del . On this Dell computer, the F2 key would open the UEFI menu. This screen is listed right after the computer boots. Search for the Secure Boot option. This option is usually placed in any of the following tabs: Security , Authentication or Boot .On HP computers Secure Boot is listed at the Security tab: On Acer computers it’s listed at the Authentication tab: Select the Secure Boot option and make sure it’s Disabled or Off Save the changes Restart the computer. Fix #2: Run Automatic Repair. Follow these steps to run Automatic Repair: Insert the Windows 8 media: the DVD or the USB Restart the computer and boot from the media Click Repair your computer or press R Select Troubleshoot Select Advanced options Click Automatic repair Follow the remaining steps to complete the process. If you don’t have the original Windows 8/8.1 media to access Automatic Repair, you can try to restart the computer multiple times: Hold the Power button to your computer Press the Power button to start your computer As soon as your computer stats to boot, press the Power button to shutdown your computer Perform these steps a few times until Windows 8 shows the Recovery screen: Fix #3: Disable early launch anti- protection. If Fix #1 or Fix #2 doesn’t work to fix the winload.efi error, you can also try to disable the built-in anti-malware protection that your Windows 8 system has activated by default. Access the Advanced options screen (see Fix #2 steps on how to do this using the original disc or try to shutdown/start your computer a few times using the Power button) Click Startup Click Restart Your computer will restart and boot into the Startup Settings screen Press F8 to select 8) Disable early launch anti-malware protection. Fix #4: Run bootrec. Similar to Fix #1: Rebuild the BCD for Windows 7, you can try to run the same bootrec commands on your Windows 8 systems: Boot from the installation DVD or USB Click Repair your computer or press R Navigate to Troubleshoot > Command Prompt Type the bootrec commands: Press Enter after each command Remove the DVD or USB and type exit in Command Prompt: Press Enter Restart your computer. bootrec utility results screen. More Information. Linked Entries. Support Links. It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and . It’s also available for Windows XP and Windows . Applicable Systems. This Windows-related knowledgebase article applies to the following operating systems: WIN 8.1 iso download corrupt. Are you using Windows 8 genuine copy on this computer? Windows 8.1 ISO has not been made available by Microsoft. No 3rd party software download is supported by Microsoft. Please reply if you have any questions. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. Microsoft is yet to make Windows 8.1 ISO available, the link you have provided does not belong Microsoft hence it is unsupported. If you wish to upgrade to Windows 8.1 then refer the link provided by Jessen P and follow the steps from the article. Windows 8.1 Downloads corrupted. Error *file name* is corrupt and unreadable. My computer refuses to download any file, from any browser, from any connection. Whenever I try to download anything I get the message: /C:/Users/R7User/*file name* is corrupt and unreadable. It's really starting to get on my nerves. Subscribe Subscribe to RSS feed. Report abuse. Replies (4) You may try these steps and check if that resolves the issue. Method 1: Delete the Library and then rebuild it again. Let’s, first delete the corrupted Library folders from the windows explorer and then we can rebuild the default libraries and check if that works. You may follow these steps and check if that resolves the issue. a. Open the “” on the desktop screen by clicking on the file icon at the . b. Right click on Library items which you are unable to open and click on “Delete”. Note: Deleting a library does not delete the contents of the included folders. However, you may need to re-add or include your folders manually, if needed . c. Right click on the Library icon in the Navigation pane of the window. d. Click on “Restore default libraries”. e. This recreates the library that you just deleted. f. Now try and open the Library items and check if the error still occurs. You may also refer the article “ Libraries: Frequently asked questions ” from this link for more information: If the issue persists, then check if your computer is infected by any malicious software. Let’s scan the computer using Microsoft Safety Scanner and check if that resolves the issue. Method 2: Run Microsoft Safety Scanner and check if there are any infections in the computer. I would also suggest you to check if the computer is infected by any malicious software. For this let’s try running the Microsoft Safety Scanner and then check the issue. You can download and run the Safety Scanner from this link: Note: When running a scan using an Anti Virus program, any data files that are infected may be cleaned by deleting the file entirely, which means there is a potential for data loss. Please get back to us if the issue persists and we’ll check if there the issue is caused due to the bad sectors on the computer hard disk. We’ll be glad to assist you further. Method 3: I would suggest you to run SFC (System file checker) scan on the system and check if it helps. SFC scan will scan for the corrupted system files on the computer. How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833. Please post with the issue status. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. This was a very helpful response, however I was unable to solve the problem. The first method confused me and I felt as though if I deleted my User file I would lose all of my data. The second method required a download, which is the problem, so I couldn't do that either, and whenever I try to carry out the third method I get the message: Windows Resource Protection could not perform the requested operation. So I'm still stuck. Thanks for trying though. Report abuse. Was this reply helpful? Sorry this didn't help. Great! Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this reply? Thanks for your feedback. For the error: Windows Resource Protection could not perform the requested operation. Try the following: To resolve this problem, perform the System File Checker scan in safe mode. Refer to the section under Windows Resource Protection could not perform the requested operation.