DOCSLIB.ORG

Authorization to Mark

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Authorization to Mark AUTHORIZATION TO MARK This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s) Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report. This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be applied only at the location of the Party Authorized To Apply Mark. Applicant: TSEC Corporation Manufacturer: TSEC Corporation No. 85, Guangfu N. Rd., Hukou No. 85, Guangfu N. Rd., Hukou Address: Address: Township, Hsinchu County 30351 Township, Hsinchu County 30351 Country: Taiwan Country: Taiwan Contact: Mr. Austin Yu Contact: Mr. Austin Yu Phone: 886-3-696-0707#2701 Phone: 886-3-696-0707#2701 FAX: 886-3-696-0708 FAX: 886-3-696-0708 Email: [email protected] Email: [email protected] Party Authorized To Apply Mark: Same as Manufacturer Report Issuing Office: Intertek Testing Services Taiwan Ltd. Control Number: 5001522 Authorized by: Thomas J. Patterson, Certification Manager This document supersedes all previous Authorizations to Mark for the noted Report Number. This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect. Intertek Testing Services NA Inc. 545 East Algonquin Road, Arlington Heights, IL 60005 Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672 UL 1703 2002/03/15 Ed:3 Rev:2015/10/12 Standard for Safety Flat-Plate Photovoltaic Modules and Panels Standard(s): ULC/ORD-C1703-01 Second Edition 2001/01/01 Amendment October 2001 Standard for Safety Flat-Plate Photovoltaic Modules and Panels Product: PV Module Brand Name: TSEC ATM for Report 150300310TWN-001 Page 1 of 2 ATM Issued: 3-Mar-2016 ED 16.3.15 (1-Jan-13) Mandatory AUTHORIZATION TO MARK TS72-6M3-375S, TS72-6M3-370S, TS72-6M3-365S, TS72-6M3-360S, TS72-6M3-355S, TS72-6M3-350S, TS72-6M3-345S, TS72-6M3-340S, TS72-6M3-335S, TS72-6M3-330S, TS72-6M3-325S, TS72-6M3-320S, TS72-6M3-315S, TS72-6M3-310S, TS72-6M3-305S, TS72-6M3-300S, TS60-6M3-315S, TS60-6M3-310S, TS60-6M3-305S, TS60-6M3-300S, TS60-6M3-295S, TS60-6M3-290S, TS60-6M3-285S, TS60-6M3-280S, TS60-6M3-275S, TS60-6M3-270S, TS60-6M3-265S, TS60-6M3-260S, TS60-6M3-255S, TS60-6M3-250S, TS54-6M3-280S, TS54-6M3-275S, TS54-6M3-270S, TS54-6M3-265S, TS54-6M3-260S, TS54-6M3-255S, TS54-6M3-250S, TS54-6M3-245S, TS54-6M3-240S, TS54-6M3-235S, TS54-6M3-230S, TS54-6M3-225S, TS54-6M3-220S, TS48-6M3-250S, TS48-6M3-245S, TS48-6M3-240S, TS48-6M3-235S, TS48-6M3-230S, TS48-6M3-225S, TS48-6M3-220S, TS48-6M3-215S, TS48-6M3-210S, TS48-6M3-205S, TS48-6M3-200S, TS72-6M3-375, TS72-6M3-370, TS72-6M3-365, TS72-6M3-360, TS72-6M3-355, TS72-6M3-350, TS72-6M3-345, TS72-6M3-340, TS72-6M3-335, TS72-6M3-330, TS72-6M3-325, TS72-6M3-320, TS72-6M3-315, TS72-6M3-310, TS72-6M3-305, TS72-6M3-300, TS60-6M3-315, TS60-6M3-310, TS60-6M3-305, TS60-6M3-300, TS60-6M3-295, TS60-6M3-290, TS60-6M3-285, TS60-6M3-280, TS60-6M3-275, TS60-6M3-270, TS60-6M3-265, TS60-6M3-260, TS60-6M3-255, TS60-6M3-250, TS54-6M3-280, TS54-6M3-275, TS54-6M3-270, TS54-6M3-265, TS54-6M3-260, TS54-6M3-255, TS54-6M3-250, TS54-6M3-245, TS54-6M3-240, TS54-6M3-235, Models: TS54-6M3-230, TS54-6M3-225, TS54-6M3-220, TS48-6M3-250, TS48-6M3-245, TS48-6M3-240, TS48-6M3-235, TS48-6M3-230, TS48-6M3-225, TS48-6M3-220, TS48-6M3-215, TS48-6M3-210, TS48-6M3-205, TS48-6M3-200, TS72-6P3-345S, TS72-6P3-340S, TS72-6P3-335S, TS72-6P3-330S, TS72-6P3-325S, TS72-6P3-320S, TS72-6P3-315S, TS72-6P3-310S, TS72-6P3-305S, TS72-6P3-300S, TS72-6P3-295S, TS72-6P3-290S, TS72-6P3-285S, TS60-6P3-290S, TS60-6P3-285S, TS60-6P3-280S, TS60-6P3-275S, TS60-6P3-270S, TS60-6P3-265S, TS60-6P3-260S, TS60-6P3-255S, TS60-6P3-250S, TS60-6P3-245S, TS60-6P3-240S, TS54-6P3-260S, TS54-6P3-255S, TS54-6P3-250S, TS54-6P3-245S, TS54-6P3-240S, TS54-6P3-235S, TS54-6P3-230S, TS54-6P3-225S, TS54-6P3-220S, TS54-6P3-215S, TS48-6P3-230S, TS48-6P3-225S, TS48-6P3-220S, TS48-6P3-215S, TS48-6P3-210S, TS48-6P3-205S, TS48-6P3-200S, TS48-6P3-195S, TS48-6P3-190S T72-6P3-345, T72-6P3-340, T72-6P3-335, T72-6P3-330, T72-6P3-325, T72-6P3-320, T72-6P3-315, T72-6P3-310, T72-6P3-305, T72-6P3-300, T72-6P3-295, T72-6P3-290, T72-6P3-285, T60-6P3-290, T60-6P3-285, T60-6P3-280, T60-6P3-275, T60-6P3-270, T60-6P3-265, T60-6P3-260, T60-6P3-255, T60-6P3-250, T60-6P3-245, T60-6P3-240, T54-6P3-260, T54-6P3-255, T54-6P3-250, T54-6P3-245, T54-6P3-240, T54-6P3-235, T54-6P3-230, T54-6P3-225, T54-6P3-220, T54-6P3-215, T48-6P3-230, T48-6P3-225, T48-6P3-220, T48-6P3-215, T48-6P3-210, T48-6P3-205, T48-6P3-200, T48-6P3-195, T48-6P3-190 ATM for Report 150300310TWN-001 Page 2 of 2 ATM Issued: 3-Mar-2016 ED 16.3.15 (1-Jan-13) Mandatory.
Load more

Recommended publications
  • Innovamass 240S/241S Manual
    InnovaMass 240S/241S Instruction Manual Table of Contents 240/241 Series Vortex Volumetric and Mass Flow Meters Models: 240-V, VT, VTP, LP / 241-V, VT, VTP, LP, Cryogenic Instruction Manual Document Number IM-240 Revision: Q 6/20 IM-240 0-1 Table of Contents InnovaMass 240S/241S Instruction Manual GLOBAL SUPPORT LOCATIONS: WE ARE HERE TO HELP! CORPORATE HEADQUARTERS 5 Harris Court, Building L Monterey, CA 93940 Phone (831) 373-0200 (800) 866-0200 Fax (831) 373-4402 www.sierrainstruments.com EUROPE HEADQUARTERS Bijlmansweid 2 1934RE Egmond aan den Hoef The Netherlands Phone +31 72 5071400 Fax +31 72 5071401 ASIA HEADQUARTERS Second Floor Building 5 Senpu Industrial park 25 Hangdu Road Hangtou Town Pu Dong New District Shanghai, P.R. China Post Code 201316 Phone: 8621 5879 8521 Fax: 8621 5879 8586 Important Customer Notice for Oxygen Service Unless you have specifically ordered Sierra’s optional O2 cleaning, this flow meter may not be fit for oxygen service. Some models can only be properly cleaned during the manufacturing process. Sierra Instruments, Inc. is not liable for any damage or personal injury, whatsoever, resulting from the use of Sierra Instruments standard mass flow meters for oxygen gas. Specific Conditions of Use(ATEX/IECEx) Contact Manufacturer regarding Flame path information. Clean with a damp cloth to avoid any build-up of electrostatic charge. The model 240S and 241S Multivariable Mass Vortex Flowmeters standard temperature option (ST) process temperature range is -40°C to 260°C. The high temperature option (HT) process temperature range is -40°C up to +400°C.
    [Show full text]
  • WM210-220-230-240S/SI WM210-220-230-240S/SI Installation Instructions
    INSTALLATION INSTRUCTIONS Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation WM-210SI WM-220SI WM-230SI WM-240SI Dual Stud Short Throw Wall Mounts Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description WM210-220-230-240S/SI WM210-220-230-240S/SI Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and WARNING: Failure to read, thoroughly understand, and subsidiaries (collectively "Milestone"), intend to make this follow all instructions can result in serious personal injury, manual accurate and complete. However, Milestone makes no damage to equipment, or voiding of factory warranty! It is the claim that the information contained herein covers all details, installer’s responsibility to make sure all components are conditions or variations, nor does it provide for every possible properly assembled and installed using the instructions contingency in connection with the installation or use of this provided. product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, WARNING: Failure to provide adequate structural strength regarding the information contained herein. Milestone assumes for this component can result in serious personal injury or no responsibility for accuracy, completeness or sufficiency of damage to equipment! It is the installer’s responsibility to the information contained in this document. make sure the structure to which this component is attached can support five times the combined weight of all equipment. Chief® is a registered trademark of Milestone AV Technologies.
    [Show full text]
  • ROMA SURRECTA: Portrait of a Counterinsurgent Power, 216 BC - AD 72
    University of Pennsylvania ScholarlyCommons CUREJ - College Undergraduate Research Electronic Journal College of Arts and Sciences 5-2011 ROMA SURRECTA: Portrait of a Counterinsurgent Power, 216 BC - AD 72 Emerson T. Brooking University of Pennsylvania, [email protected] Follow this and additional works at: https://repository.upenn.edu/curej Part of the Ancient History, Greek and Roman through Late Antiquity Commons, Comparative Politics Commons, Military History Commons, and the Other Political Science Commons Recommended Citation Brooking, Emerson T., "ROMA SURRECTA: Portrait of a Counterinsurgent Power, 216 BC - AD 72" 01 May 2011. CUREJ: College Undergraduate Research Electronic Journal, University of Pennsylvania, https://repository.upenn.edu/curej/145. This paper is posted at ScholarlyCommons. https://repository.upenn.edu/curej/145 For more information, please contact [email protected]. ROMA SURRECTA: Portrait of a Counterinsurgent Power, 216 BC - AD 72 Abstract This study evaluates the military history and practice of the Roman Empire in the context of contemporary counterinsurgency theory. It purports that the majority of Rome’s security challenges fulfill the criteria of insurgency, and that Rome’s responses demonstrate counterinsurgency proficiency. These assertions are proven by means of an extensive investigation of the grand strategic, military, and cultural aspects of the Roman state. Fourteen instances of likely insurgency are identified and examined, permitting the application of broad theoretical precepts
    [Show full text]
  • NPE-A and NPE-S Condensing Tankless Water Heaters
    The Leader in Condensing Technology NPE-A and NPE-S Condensing Tankless Water Heaters Navien makes it easy to go tankless in residential and commercial applications. New NaviLink Wi-Fi remote control system...Now available as an add-on accessory. THE LEADER IN CONDENSING TECHNOLOGY NPE-Advanced Our advanced VENTING high efficiency UP TO 2”PVC 60 FT condensing tankless water heater CAPABILITY 1 UP TO technology with the 2 GAS 24 FT only internal pump UP TO and buffer tank 16 CASCADE UNITS UP TO UP TO U E E 0.97 F 0.96 F ComfortFlo Exclusive built-in recirculation system included on all NPE-A models Navien ComfortFlow® is the first and only system that incorporates a built-in insulated buffer tank and recirculation pump. The buffer tank eliminates the “cold water sandwich” effect and issues of minimum flow rates commonly found in other tankless water heaters. The recirculation pump saves on water bills by reducing the time to get hot water. When activated, the optional ComfortFlow mode results in additional energy usage. NPE-Standard Our standard STAINLESS DUAL STEEL ultra condensing HEAT EXCHANGERS tankless technology with OR FIELD GAS NG LP CONVERTIBLE the industry’s top rated unit for RESIDENTIAL& energy efficiency COMMERCIAL UP TO UP TO U E E 0.99 F 0.97 F NPE-A and NPE-S series facts Temperature rise DHW capacity Warranty Temp NEW 180 210 240 Natural gas Propane gas Heat Models Application Labor Parts rise 150S series series series (BTU/H) (BTU/H) exchanger (°F) GPM GPM GPM GPM NEW NPE-150S 18,000–120,000 18,000–120,000 Standard or 35 6.8 8.4 10.1 11.2 controlled 1 year 5 years 15 years NPE-180 A/S series 15,000–150,000 15,000–150,000 Residential recirculation 40 5.9 7.4 8.8 9.8 Uncontrolled 1 year 3 years 5 years 45 5.3 6.5 7.8 8.7 NPE-210 A/S series 19,900–180,000 19,900–180,000 recirculation Standard or 50 4.8 5.9 7.1 7.8 NPE-240 A/S series 19,900–199,900 19,900–199,900 controlled recirculation for 55 4.3 5.3 6.4 7.1 1 year 5 years 8 years units produced 60 4.0 4.9 5.9 6.5 Operating cost on or after Jan.
    [Show full text]
  • The Crisis of the Third Century A.D
    THE CRISIS OF THE THIRD CENTURY A.D. Dr. G.M. ROGERS Introduction Late in A.D. 155 the Greek orator Publius Aelius Aristides from Had- rianoi in Northern Mysia praised Roman rule in the presence of the im- perial court at Rome. Indeed, the poets say that before the rule of Zeus everything was filled with faction, uproar, and disorder, but that when Zeus came to rule, everything was put in order and the Titans were banished to the deepest corners of the earth, driven there by him and the gods who aided him. So too, in view of the situation before you and under you, one would suppose that before your empire everything was in confusion, top- sy-turvy, and completely disorganized, but that when you took charge, the confusion and faction ceased and there entered in universal order and a glorious light in life and govemment and the laws came to the fore and the altars of the gods were believed in'. According to Aelius, Rome had firmly established the basis for civi- lised life-security, the rule of law, and, most importantly, providentia deo- rum, the providence of the gods. The gods looked out for the inhabitants of the Roman empire2. A golden age had arrived. Later Edward Gibbon pronounced his famous verdict on the era from A.D. 96-I80. If a man were called to fix the period in the history of the world dur- ing which the condition of the human race was most happy and prospe- rous, he would, without hesitation, name that which elapsed from the death of Domitian to the accession of Commodus.
    [Show full text]
  • Long Distance Trade and the Parthian Empire: Reclaiming Parthian Agency from an Orientalist Historiography
    Western Washington University Western CEDAR WWU Graduate School Collection WWU Graduate and Undergraduate Scholarship Spring 2018 Long Distance Trade and the Parthian Empire: Reclaiming Parthian Agency from an Orientalist Historiography Evan J. (Evan Jeffery) Jones Western Washington University, [email protected] Follow this and additional works at: https://cedar.wwu.edu/wwuet Part of the History Commons Recommended Citation Jones, Evan J. (Evan Jeffery), "Long Distance Trade and the Parthian Empire: Reclaiming Parthian Agency from an Orientalist Historiography" (2018). WWU Graduate School Collection. 692. https://cedar.wwu.edu/wwuet/692 This Masters Thesis is brought to you for free and open access by the WWU Graduate and Undergraduate Scholarship at Western CEDAR. It has been accepted for inclusion in WWU Graduate School Collection by an authorized administrator of Western CEDAR. For more information, please contact [email protected]. Long Distance Trade and the Parthian Empire: Reclaiming Parthian Agency from an Orientalist Historiography By Evan Jones Accepted in Partial Completion of the Requirements for the Degree Master of Arts in History ADVISORY COMMITTEE Dr. Steven Garfinkle, Chair Dr. Roger Thompson Dr. Tristan Goldman GRADUATE SCHOOL Dr. Gautam Pillay, Dean Master’s Thesis In presenting this thesis in partial fulfillment of the requirements for a master’s degree at Western Washington University, I grant to Western Washington University the non-exclusive royalty-free right to archive, reproduce, distribute, and display the thesis in any and all forms, including electronic format, via any digital library mechanisms maintained by WWU. I represent and warrant this is my original work and does not infringe or violate any rights of others.
    [Show full text]
  • Multivariable Mass Vortex Flow Meter
    Multivariable Mass Vortex S Flow Meter FEATURES n Mass and volumetric flow measurement of gas, liquid, and steam n Multivariable outputs for five process parameters: n Mass flow rate 241 n Volumetric flow rate n Temperature / n Pressure n Density n Single process connection n In-line (1/2 inch to 8 inch) and insertion (into pipes > 2 inch) configurations n Field-configurable ranges, alarms, outputs and displays n Field configurable via six push buttons or magnet through explosion-proof window DESCRIPTION n Smart DSP electronics extends low flow range down to a Reynolds number of 5000 240S ierra was the first to introduce a multivariable n Rangeability up to 30:1 S mass vortex flow meter to the market in the n Temperature -330°F (-200°C) up to 750°F (400°C) ® late 1990’s. Sierra’s multivariable product line ® n Cryogenic version measures liquid O2, N2, Ar, features an in-line version, the InnovaMass 240 and a unique insertion version, the InnovaMass® and CO2 down to -330°F (-200°C) 241S. The 241S has emerged recently as the n Pressure up to 1500 psia (100 bara) proven instrument of choice in geothermal steam n High pressure version to 5000 psig (345 barg) applications across the globe. Both the 240S and n Ideal for steam applications 241S measure the mass flow rate of any gas or liquid and are ideally suited for saturated or superheated n Flow computer integrates AGA-8 equations for steam. The InnovaMass offers customers one natural gas instrument and one process connection, measuring n Supports HART, Modbus and BACnet digital five process parameters simultaneously: mass flow communication protocols rate, temperature, pressure, volumetric flow rate, and Mass n FMC and ATEX approval fluid density.
    [Show full text]
  • HIT Power 240S Series HIT Power 235S Series HIT Power 230S Series
    General Installation Manual Contents HIT Photovoltaic Module Please read before installation Model No. Safety Precautions HIT Power 240S z General Information :2 HIT Power 240S series z VBHN240SA06 and 06B z Warning :2 HIT Power 235S series HIT Power 235S z Cautions :2 z General Safety :2 HIT Power 230S series z VBHN235SA06 and 06B HIT Power 230S z UL Listing Information :2 z VBHN230SA06 and 06B Thank you for choosing Panasonic HIT Installation photovoltaic (PV) modules. Please read z General :2 this manual completely before z Notes on Installation :3 installation or use of Panasonic HIT PV z Operating Conditions :4 modules. With proper operation and maintenance, Panasonic HIT PV Specifications modules will provide you with clean, z Note on Specifications :4 renewable solar electricity for many z Mechanical Loading :4 years. This manual contains important installation, maintenance and safety Wiring information. The word “module” as z General :4 used in this manual refers to one or z Module Wiring :4 more PV modules. Retain this manual z Array Wiring :4 for future reference. z Earth Ground Wiring :4 z Grounding Locations :5 SANYO is part of the Panasonic Group z Grounding Methods :6 and is in charge of the manufacturing z Module Terminations :6 process for Panasonic HIT PV modules. z Junction Box and Terminals :6 z Conduit :6 Bypass Diodes :7 Maintenance :7 Disclaimer of Liability :7 Customer Services :7 VBHNxxxSA series 1 Safety Precautions • Unauthorized persons - except the • Electrically ground modules for all General Information qualified
    [Show full text]
  • Inventory Control Form Titanium Cannulated Humeral Nail-EX System
    Inventory Control Form Titanium Cannulated Humeral Nail-EX System Patient Information: SYNTHES (USA) SYNTHES (Canada) Ltd. To Order: (800) 523-0322 To Order: (800) 668-1119 Date: Hospital: Surgeon: Procedure: Implants 7 mm Titanium Cannulated Proximal 11 mm Titanium Cannulated Humeral Humeral Nail-EX, Sterile Nail-EX, Sterile LENGTH LENGTH LENGTH 04.001.210S 150 mm 04.001.618S 190 mm 04.001.632S 260 mm 04.001.620S 200 mm 04.001.634S 270 mm 04.001.622S 210 mm 04.001.636S 280 mm 9 mm Titanium Cannulated Proximal 04.001.624S 220 mm 04.001.638S 290 mm Humeral Nail-EX, Sterile 04.001.626S 230 mm 04.001.640S 300 mm 04.001.628S 240 mm 04.001.642S 310 mm LENGTH 04.001.410S 150 mm 04.001.630S 250 mm 04.001.644S 320 mm Titanium End Cap with T25 StarDrive for 11 mm Titanium Cannulated Proximal Titanium Humeral Nail-EX Spiral Blade◊ Humeral Nail-EX, Sterile LENGTH 04.001.000 0 mm extension 04.001.610S 150 mm 04.001.001 5 mm extension 04.001.002 10 mm extension 04.001.003 15 mm extension 7 mm Titanium Cannulated Humeral Nail-EX, Sterile LENGTH LENGTH Titanium Spiral Blade for Titanium 04.001.218S 190 mm 04.001.232S 260 mm Humeral Nails◊ 04.001.220S 200 mm 04.001.234S 270 mm LENGTH LENGTH 04.001.222S 210 mm 04.001.236S 280 mm 462.634 34 mm 462.646 46 mm 04.001.224S 220 mm 04.001.238S 290 mm 462.636 36 mm 462.648 48 mm 04.001.226S 230 mm 04.001.240S 300 mm 462.638 38 mm 462.650 50 mm 04.001.228S 240 mm 04.001.242S 310 mm 462.640 40 mm 462.652 52 mm 04.001.230S 250 mm 04.001.244S 320 mm 462.642 42 mm 462.654 54 mm 462.644 44 mm 9 mm Titanium Cannulated Humeral Nail-EX, Sterile LENGTH LENGTH 04.001.418S 190 mm 04.001.432S 260 mm 04.001.420S 200 mm 04.001.434S 270 mm 04.001.422S 210 mm 04.001.436S 280 mm 04.001.424S 220 mm 04.001.438S 290 mm 04.001.426S 230 mm 04.001.440S 300 mm 04.001.428S 240 mm 04.001.442S 310 mm 04.001.430S 250 mm 04.001.444S 320 mm Synthes is a trademark of Synthes, Inc.
    [Show full text]
  • License Change Request 90-05 to Licenses DPR-44 & DPR-56 Re
    ,t Statien Support Diptrtrnsnt - . $ _ 10 CFR 50.90 t . IECO ENERGY =Pa==;L 9% Chestert) rook Boulevard Wayne.PA 19087 5691 March 28,1994 , Docket Nos. 50-277 50-278 License Nos. DPR-44 DPR-56 U. S. Nuclear Regulatory Commission ATTN: Document Control Desk Washington, DC 20555 SUBJECT: Peach Bottom Atomic Power Station, Units 2 and 3 Facility Operating License Change Request Dear Sir: PECO Energy Company hereby submits License Change Request (LCR) 90-05, in accordance with 10 CFR 50.90, requesting changes to the Peach Bottom Atomic Power Station (PBAPS) Facility Operating Licenses (FOL). The proposed changes concern the relocation of the Technical Specifications Fire Protection requirements to the Updated Final Safety Analysis Report in accordance with NRC Generic Letter (GL) 86-10, " Implementation of Fire Protection Requirements," and GL 88-12, " Removal of Fire Protection Requirements from Technical Specifications." Attachment 1 to this letter describes the proposed changes and Attachment 2 contains the revised pages, if you have any questions concerning this submittal, please contact us. Sincerely, .h. ,4 . G. A. Hunger, r., Director ~ Licensing Section Enclosures: Affidavit, Attachments n .s n n n. s\ 9404040218 940328 PDR ADoCK 0500o277=_ P PDR , - y 1 , .. [" n-' . March 28,1994 ' Page 2 , .V, , / ' cc: T. T. Martin, Administrator, Region I, USNRC W. L Schmidt, Senior Resident inspector, PBAPS, USNRC , , W. P. Dornsife, Commonwealth of Pennsylvania | - t | ~ j- ) P 3 1+ Y ' . , . _ t 4 I i - .. 1 ' . ..; COMMONWEALTH OF PENNSYLVANIA : i : SS. COUNTY OF CHESTER : , ; D. M. Smith, being first duly sworn, deposes and says: That he is Senior Vice President and Chief Nuclear Officer of PECO Energy Company; the applicant herein; that he has read the attached Ucense Change ; Request (LCR 90-05) for changes to the Peach Bottom Facility Operating Ucenses DPR-44 and DPR-56, and knows the contents thereof: and that the statements and matters set forth therein are true and correct to the best of his knowledge, information and belief.
    [Show full text]
  • Chapter Seventeen the Establishment of Christendom, 235
    Chapter Seventeen The Establishment of Christendom, 235 to 430 In 235 Christianity was still a minor subculture in the Roman empire, and also in the adjacent lands. More people worshiped in the Judaean synagogues than in the Christian churches, and the great majority of the population belonged neither to a synagogue nor a church: in the early third-century empire perhaps only one person in ten worshiped God. By 430, when Augustine died soon after finishing his City of God, the Roman emperors had been Christian for more than a hundred years, and most people in the empire, in Armenia, and even in Ethiopia were Christians. The establishment of Christianity coincided with a series of Roman military and political disasters and ultimately with the empire‟s collapse in the Latin west. The rise of the Sassanids, and the first crisis of the Roman empire (235-284) In the third century, after more than four hundred years of security, the Roman empire came close to disintegration. Specifically, in the years between the death of Alexander Severus (235) and the accession of Diocletian (284) the empire was battered by external enemies and was drained internally by political chaos and by monetary collapse. The troubles of 235-284 were in many ways a harbinger of what was to come in the late fourth and fifth centuries, when the empire‟s western provinces were lost, a chain of events traditionally called “the fall of Rome.” The Romans‟ troubles began with an apparent success. Between 194 and 198 Septimius Severus led two victorious expeditions against the Parthian empire, and the second culminated in the burning of the Parthian capital, Ctesiphon, on the east bank of the Tigris river.
    [Show full text]
  • Majoring in Sociology/Anthropology
    MAJORING IN SOCIOLOGY/ANTHROPOLOGY A major consists of a minimum of 10 courses total: 5 core courses, Stats 110 or 212, 1 Area or Topical course, 1 Social Structures and Processes course, plus 2 additional departmental courses. Complete ALL of these Core Courses: ___ 291 History of Sociological Theory HWC (offered spring semester only) Recommended: Take this sophomore year ___ 292 Anthropological Theory WRI (offered fall semester only) Recommended: Take this sophomore year ___ 371 Foundations of Social Science Research: Quantitative Methods ORC, WRI (offered fall semester only, prerequisite = Statistics 110 or 212) Open only to Juniors or Seniors. ___ 373 Ethnographic Research Methods WRI (offered spring semester only, prerequisite = 291 or 292) Open only to Juniors or Seniors. ___ 399 Senior Seminar EIN (spring semester of senior year) Also complete: ___ Statistics 110 or 212 (or AP equivalent) Recommended: Take this course first year/sophomore year Complete ONE of these Area and Topical courses: ___ 232 Thailand: Culture, Institutions, and Interactions (interim abroad) MCG, ORC ___ 235 Introduction to Islamic Feminisms MCG ___ 236 The Arab World HBS, MCG ___ 237 Forging a Latin American Culture HBS, MCG ___ AS/SA 239 Modern Southeast Asia HBS, MCG ___ 246 GLBTQA Lives and Issues HBS ___ 247 Disasters HBS, MCG ___ 248 Sociology of Death, Dying, and Bereavement HBS ___ 296, 297, 299 Topics in Sociology-Anthropology - GEs dependent upon course offered Complete ONE of these Social Structures and Processes courses: ___ 260 Marriage and the Family HBS, MCD ___ 261 Gender in Cross-Cultural Perspective HBS, MCG ___ 262 Global Interdependence HBS, MCG ___ 264 Race and Class in American Culture HBS, MCD ___ 265 Religion, Culture and Society HBS ___ 267 Medical Anthropology HBS, MCG ___ 269 Urban Sociology HBS, MCD Complete TWO Elective courses: NOTE: 100-level courses are mainly for first-year students.
    [Show full text]