DOCSLIB.ORG

REMOTE ITER BUSINESS MEETING Business to Business Contacts Companies Are Encouraged to Contact Directly the Business Representat

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
REMOTE ITER BUSINESS MEETING Business to Business Contacts Companies Are Encouraged to Contact Directly the Business Representat REMOTE ITER BUSINESS MEETING Business to Business contacts 7-8 April 2021 Company First Name Last Name Position Email Address 2c2i-Boccard Pierre-Yves JULIEN Business Development Manager [email protected] 3TI PROGETTI ITALIA - INGEGNERIA INTEGRATA S.p.A. Marie Chayreyron Architect [email protected] 3TI PROGETTI ITALIA - INGEGNERIA INTEGRATA S.p.A. Giorgia Di Biagio Senior Engineer [email protected] 3TI PROGETTI ITALIA - INGEGNERIA INTEGRATA S.p.A. Giorgia Gunnella Director of International Business Development [email protected] 3TI PROGETTI ITALIA - INGEGNERIA INTEGRATA S.p.A. Federica Ingletti Proposal Manager [email protected] 40-30 Tarek BELLADJ Business Manager [email protected] 40-30 Pierre Aimé Boisson Project manager [email protected] 6tec François Fihman Mech. engineer [email protected] A&P Group Ltd David Cook Business Development Manager [email protected] A. Silva Matos - Metalomecânica, SA Pedro Pinheiro CCO [email protected] ABSOLUT SYSTEM Alexandre GIGNOUX Sales & Marketing Manager [email protected] acaly peter Renton consultant [email protected] Accaiierie Valbruna Spa Paolo Baretta Sales Manager Special Steel for Energy Producion [email protected] ACEPP Entreprise Jean-Baptiste Adrien Business Unit Manager [email protected] Actemium NDT E&S Serge selles Business Unit Manager [email protected] ACTIVE SPACE TECHNOLOGIES S.A. Filipe Castanheira Business Developer [email protected] AEMCO Mickael MATRAY Maintenance Services Manager [email protected] Aernnova Valentina Andreeva Business Development Executive [email protected] Aernnova Engineering Division Alejandro Otero Business Development & Project Management [email protected] Agence de développement des Alpes de Haute Provence Françoise CARDONA Chargée de mission développement économique [email protected] Agence ITER France Philippe OLIVIER French ILO/F4E Deputy [email protected] Agence ITER France/DGEC Sabine PORTIER ILO France [email protected] Agência Nacional de Inovação José Antão Industrial Liaison Officer [email protected] Ahlberg Cameras AB Peter Legath CSO [email protected] AIMEN Joseba Andoni Delgado Velilla Sales Manager [email protected] Air Liquide Domenico D'Andrea Business Developer [email protected] Air Liquide Advanced Technologies CHARPENTIER Nicolas Head of Contract Management [email protected] AIR LIQUIDE CRYOGENIC SERVICES Frédéric MARTIG C.E.O. [email protected] Air products Laurent Toulouse Helium business manager [email protected] AIT Håkan Knutsson Manager Business Development [email protected] AJR Conseil Philippe ADNOT Managing Director [email protected] AK Steel International B. V. Christoph Ross Business Development Manager Magnetic Applications [email protected] AKKA TECHNOLOGIES Caroline LEFEBVRE Business Unit Director [email protected] ALCEN Joël vanden Bosch Business Development [email protected] ALMIRA Pascal WEIL CEO [email protected] ALPHATEST Arnaud VILLEMIANE Directeur Général Adjoint [email protected] ALSYMEX Didier Abondance Project & Bid manager [email protected] Alsymex Yann Romeo Business manager iter [email protected] ALSYMEX-ALCEN Eric GIGUET Head of Sales and Business Development [email protected] ALSYMEX-ATMOSTAT Erwan Bouvier ITER and Fusion Program Director [email protected] Altair Enginnering India Pvt Ltd kolluri P R K Srikanth IPA [email protected] ALTEN Julien Moutard Business Manager [email protected] ALTEN Marion VERAN Business Developpment Support [email protected] Alter Technology TÜV NORD Eladio Montoya Business Development Big Science [email protected] Altert Technology Enrique Picornell Project Manager [email protected] ALTRAN Laurent BROMET Group Vice-President Energy, Utilities and Life Sciences [email protected] Companies are encouraged to contact directly the business representatives in the list who have expressed interest for connecting with others. 1 REMOTE ITER BUSINESS MEETING Business to Business contacts 7-8 April 2021 Altran part of Cap Gemini PIERRE-JEAN GONNET Team Manager [email protected] ALTRAN Technologies Antoine KLAEYLE Key Account Manager [email protected] AMF PRECISION ENGINEERING DAVID GREGORY SALES MANAGER [email protected] Ampegon Power Electronics AG Simon Keens Sales & Business Development Manager [email protected] ANI Eduardo Cardoso Intern [email protected] Ankura Marc Guilliet Senior Director [email protected] Ansaldo Nuclear Philip Stockdale Uk Business development Director [email protected] Ansaldo Nucleare S.p.A Roberto ADINOLFI Chairman [email protected] Ansaldo Nucleare S.p.A Xavier FAUCHER Sales Director [email protected] Ansaldo Nucleare spa Gianfranco Saiu Head of Customers and Sales - Nuclear New Builds & Services [email protected] ANTEC MAGNETS Lander Diego Business Development Manager [email protected] APAVE CHRISTOPHE GARY ITER Key Account Manager for APAVE [email protected] APAVE BRANCHE LEM YOANN ROMANO Directeur Agence [email protected] APAVE SA Philippe TOLLINI Corporate Business Manager [email protected] Apiezon Penelope Livesey Applications Engineer [email protected] Applus Laboratories Alfonso Carpio Rovira R&D Manager [email protected] APS Coating Solutions Mohamed MELLALI Chef de Marché Projection Thermique [email protected] APS Energia SA Slawomir Wesolek Export Strategy Director T&T [email protected] AQ Anton Kft. András Szépligeti Project Manager [email protected] AQUALOGUS Fernando Carvalho International Managing Director [email protected] Aquila Data Enabler Tristan Barbagelata Business Manager [email protected] Aquila Data Enabler Julien Bettan Business Manager [email protected] Aquila Nuclear Engineering Limited Drew Corbett Commercial Director [email protected] arbeitsblende / photography Christian Lünig Owner [email protected] Arceclima Sistemas y Aplicaciones S.L. Jorge Buceta Freire Project Manager [email protected] ARCYS Thierry MAZON Business Development Manager [email protected] ARCYS (a TechnicAtome subsidiary) Camille GISPERT Business Developer I&C - IIoT [email protected] Argenta Chris Woodhams Managing Director [email protected] ARIAL INDUSTRIES DANIEL GARCIN Managing Director [email protected] ARIAL Industries Vincent Vacarises Project manager [email protected] ARKADIA Pierre-Axel Cappe Studies and Development Engineer [email protected] ARKADIA alexandre cousin General Manager [email protected] ARKADIA Buffille Tom Business Manager [email protected] Armech Solutions Marcus Tennant Mechanical Engineer [email protected] ARTELIA Nathanael Schmidt Business Development [email protected] ASE Optics Europe Lidia Briquets Sales and marketing manager [email protected] ASE Optics Europe Andrés Cifuentes CEO [email protected] ASG Superconductors Antonio Pellecchia Commercial and Sales Manager [email protected] ASG SUPERCONDUCTORS Luca Pezzoni Head of Communication [email protected] ASG Superconductors Spa Davide Malacalza Chairman [email protected] ASR Technologies Andrew S Podgorski Prezydent head scientist [email protected] ASR Technologies Andrew S. Podgorski President [email protected] ASSISTECH ONE- ENGIE MALEK BRIK LEAD INSTRUMENTATION ENGINEER [email protected] Assystem Bernard BLANC VP Nuclear Business Development [email protected] ASSYSTEM ROMAIN BUISSON Business Manager [email protected] ASSYSTEM Gwénolé EVRARD Directeur commercial nucléaire [email protected] Assystem Paul Oldfield Key Account Manager [email protected] Companies are encouraged to contact directly the business representatives in the list who have expressed interest for connecting with others. 2 REMOTE ITER BUSINESS MEETING Business to Business contacts 7-8 April 2021 Assystem E&I Ltd Gary Reed Business Manager [email protected] Assystem Energy & Infrastructure Fanny Fouin Technical Lead [email protected] Assystem Engineering & Operation Services Hadrien Magnino Bid Manager [email protected] ASSYSTEM EOS Sébastien BONICI Business Manager [email protected] ASTARE Guy VEIDIG Manager [email protected] ASTERALIS Mickael GARCES Directeur commercial [email protected] ASTURFEITO ALVARO ZARZA BUSINESS DEVELOPMENT MANAGER [email protected] ATG Europe Enrico Angioli IT Solutions Strategic Advisor [email protected] ATG Europe Alberto Donadoni Chief Commercial Officer [email protected] ATG Europe Ivan Horvatovic Business Development Manager [email protected] Atkins Jason Dreisbach Chief Engineer [email protected] Atkins James Goodenough Project Director [email protected] ATLAS Thierry BALENSI 10 [email protected] ATO SRL Davide Polloni EMEA Sales Manager [email protected] ATS Automation Bav Thaker Key Account Manager [email protected] ATS Automation Bav Thaker General Manager [email protected] AUSY Guillaume AVIGNON Business
Load more

Recommended publications
  • Framatome in Latin America Strong History and Partnerships
    SEN – Semana da Engenharia Nuclear UFRJ 17/10/2019 Framatome– 2019 1 © Framatome All right reserved Framatome– 2019 2 © Framatome All right reserved Framatome at a glance 60 years of experience, alongside our customers, in developing safe and competitive nuclear power worldwide Design Supply Manufacture Integrate Maintain Framatome– 2019 3 © Framatome All right reserved Framatome at a glance High-performing people and technologies for safe and competitive nuclear plants worldwide 92 14 000 250 3.3 NPPs PEOPLE REACTORS € BILLION As OEM Servicing … All over the world 2017 turnover Framatome– 2019 4 © Framatome All right reserved Our values More than principles, our values guide our actions and describe how we work each other, with our customers and business partners Safety Future Performance Integrity Passion Framatome– 2019 5 © Framatome All right reserved Framatome worldwide presence Germany 4 sites France 17 sites USA 7 sites China 8 sites 58 locations Argentina Japan Sweden 21 Belgium Republic of South Switzerland countries Others Brazil Africa The Netherlands locations Bulgaria Russia Ukraine Canada Slovakia United Arab Emirates Framatome– 2019 Czech Republic Slovenia United Kingdom 6 Finland South Korea © Framatome Hungary Spain All right reserved Our customers Asia CNNC Nawah CGN Tepco North & South America Doosan Hitachi Bruce Power Exelon OPG KHNP Dominion Corporation PSEG Africa MHI Duke Energy Luminant TVA Entergy NA-SA Eskom ETN NextEra Europe ANAV EDF Energy Skoda CNAT Engie TVO CEA EPZ Vattenfall CEZ Iberdrola DCNS KKG EnBW NEK Framatome– 2019 7 EDF RWE © Framatome All right reserved Framatome shareholder structure 19,5% 75,5% 5% • Stock-listed company • Majority shareholder: French state 100% Framatome Inc.
    [Show full text]
  • French Nuclear Company Orano Upgraded to 'BB+' on Improved Liquidity and Capital Structure; Outlook Stable
    Research Update: French Nuclear Company Orano Upgraded To 'BB+' On Improved Liquidity And Capital Structure; Outlook Stable Primary Credit Analyst: Christophe Boulier, Paris (39) 02-72111-226; [email protected] Secondary Contact: Andrey Nikolaev, CFA, Paris (33) 1-4420-7329; [email protected] Table Of Contents Overview Rating Action Rationale Outlook Ratings Score Snapshot Issue Ratings--Recovery Analysis Related Criteria Ratings List WWW.STANDARDANDPOORS.COM/RATINGSDIRECT APRIL 5, 2018 1 Research Update: French Nuclear Company Orano Upgraded To 'BB+' On Improved Liquidity And Capital Structure; Outlook Stable Overview • Orano has reported EBITDA of close to €1 billion for 2017, despite challenging industry conditions, and its recent restructuring and capital increases have improved its liquidity and capital structure. • We think Orano will continue to focus on cost-cutting and generate moderately positive free operating cash flow, enabling it to reduce net debt in 2018-2020. • Consequently, we are upgrading Orano to 'BB+' from 'BB'. • The stable outlook reflects our view that Orano will be able to reduce adjusted debt to EBITDA to below 5.5x in 2019-2020 despite challenging industry conditions, supported by its sizeable, long-term order backlog. Rating Action On April 5, 2018, S&P Global Ratings raised its long-term issuer credit rating on France-based nuclear services group Orano to 'BB+' from 'BB'. The outlook is stable. We also raised our ratings on Orano's senior unsecured bonds to 'BB+' from 'BB'. Although we expect substantial recovery (70%-90%; rounded estimate 85%) on the bonds in the event of a default, the recovery rating is capped at '3' due to the bonds' unsecured nature and issuance by a company rated in the 'BB' category.
    [Show full text]
  • Physique Nucléaire Et De L'instrumentation Associée Introduction
    FR0108546 # DEA-DAPNIA-RA-1997-98 A il. ..33/04 -DSM Département d'Astrophysique, de physique des Particules, de physique Nucléaire et de l'Instrumentation Associée Introduction Motivés par la curiosité pour les connaissances fondamentales et soutenus par des investissements impor- tants, les chercheurs du vingtième siècle ont fait des découvertes scientifiques considérables, sources de retombées économiques fructueuses. Une recherche ambitieuse doit se poursuivre. Organisé pour déve- lopper les grands programmes pour le nucléaire et par le nucléaire, le CEA est bien armé pour concevoir et mettre au point les instruments destinés à explorer, en coopération avec les autres organismes de recherche, les confins de l'infiniment petit et ceux de l'infinimenf grand. La recherche fondamentale évolue et par essence ne doit pas avoir de frontières. Le Département d'astrophysique, de physique des particules, de physique nucléaire et de l'instrumentation associée (Dapnia) a été créé pour abolir les cloisons entre la physique nucléaire, la physique des particules et l'as- trophysique, tout en resserrant les liens entre physiciens, ingénieurs et techniciens au sein de la Direction des sciences de la matière (DSM). Le Dapnia est unique par sa pluridisciplinarité. Ce regroupement a permis de lancer des expériences se situant aux frontières de ces disciplines tout en favorisant de nou- velles orientations et les choix vers les programmes les plus prometteurs. Tout en bénéficiant de l'expertise d'autres départements du CEA, la recherche au Dapnia se fait princi- palement au sein de collaborations nationales et internationales. Les équipes du Dapnia, de I'IN2P3 (Institut national de physique nucléaire et de physique des particules) et de l'Insu (Institut national des sciences de l'Univers) se retrouvent dans de nombreuses grandes collaborations internationales, chacun apportant ses compétences spécifiques afin de renforcer l'impact de nos contributions.
    [Show full text]
  • RIL AMT Workshop Summary
    RIL 2021-03 NRC WORKSHOP ON ADVANCED MANUFACTURING TECHNOLOGIES FOR NUCLEAR APPLICATIONS Part I – Workshop Summary Date Published: Draft April 2021 Prepared by: A. Schneider M. Hiser M. Audrain A. Hull Research Information Letter Office of Nuclear Regulatory Research Disclaimer This report was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any employee, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for any third party’s use, or the results of such use, of any information, apparatus, product, or process disclosed in this publication, or represents that its use by such third party complies with applicable law. This report does not contain or imply legally binding requirements. Nor does this report establish or modify any regulatory guidance or positions of the U.S. Nuclear Regulatory Commission and is not binding on the Commission. EXECUTIVE SUMMARY Advanced manufacturing technologies (AMTs) are defined by the U.S. Nuclear Regulatory Commission (NRC) as those techniques and material processing methods that have not been traditionally used or formally standardized/codified by the nuclear industry. In June 2020, the NRC released Revision 1 to the Agency Action Plan for AMTs (AMT AP) (Agencywide Documents Access and Management System Accession No. ML19333B980 (package)). The AMT AP is a strategic plan that responds to the rapid pace of developments in respective AMTs and industry implementation plans. The NRC’s AMT activities are driven by industry interest in implementing specific AMTs and ensuring that the NRC staff are prepared to review potential AMT applications efficiently and effectively.
    [Show full text]
  • ITER Project Garching for the Fusion Community an Historic Milestone Was Achieved at the Eighth ITER Negotiations Meeting on February 18-19, 2003 in St
    newsletternewsletter Vol 2003 / 2 April 5, 2003 EUROPEAN FUSION DEVELOPEMENT AGREEMENT News Issued by the EFDA Close Support Unit China and the US as New Partners in the ITER Project Garching For the fusion community an historic milestone was achieved at the Eighth ITER Negotiations Meeting on February 18-19, 2003 in St. Petersburg (Russian Federation), when delega- tions from the People’s Republic of China and the United States of America joined those from Canada, the European Union, Japan and the Russian Federation in their efforts to reach agreement on the implementation of the ITER pro- ject. The Head of the Chinese Delegation indicated that Contents China, as the largest developing country in the world, has a great need to pursue alternative energy sources. China . Interview: believes that ITER can potentially lead to new forms of ener- Dr. Joseph V. Minervini gy and contribute to the peaceful and sustainable development page 2 of the world in the long-term. China expressed its strong wishes to be a valuable member of the ITER family, to make joint efforts with . Interview: other partners to the successful exploitation of fusion energy. Prof. Huo Yuping At their St. Petersburg meeting the ITER Negotiators approved the Report on the page 3 Joint Assessment of Specific Sites (JASS). The JASS Report provided as a main con- clusion and despite the differences between the candidate sites (Clarington in Canada, . ITER: Cadarache in France, Vandellos in Spain and Rokkasho-mura in Japan) that the JASS First Full Scale Primary assessment ascertained that all four sites are sound and fully capable to respond to all First Wall Panel ITER Site Requirements and Design Assumptions, as approved by the ITER Council in its January 2000 meeting.
    [Show full text]
  • Topical Review Solenoid-Free Plasma Start-Up in Spherical Tokamaks
    Home Search Collections Journals About Contact us My IOPscience Solenoid-free plasma start-up in spherical tokamaks This content has been downloaded from IOPscience. Please scroll down to see the full text. 2014 Plasma Phys. Control. Fusion 56 103001 (http://iopscience.iop.org/0741-3335/56/10/103001) View the table of contents for this issue, or go to the journal homepage for more Download details: IP Address: 198.125.233.17 This content was downloaded on 06/01/2015 at 20:20 Please note that terms and conditions apply. Plasma Physics and Controlled Fusion Plasma Phys. Control. Fusion 56 (2014) 103001 (19pp) doi:10.1088/0741-3335/56/10/103001 Topical Review Solenoid-free plasma start-up in spherical tokamaks R Raman1 and V F Shevchenko2 1 William E. Boeing Department of Aeronautics and Astronautics, University of Washington, Seattle, WA 98195, USA 2 CCFE, Culham Science Centre, Abingdon, Oxon, OX14 3DB, UK E-mail: [email protected] Received 15 June 2014, revised 20 August 2014 Accepted for publication 1 September 2014 Published 22 September 2014 Abstract The central solenoid is an intrinsic part of all present-day tokamaks and most spherical tokamaks. The spherical torus (ST) confinement concept is projected to operate at high toroidal beta and at a high fraction of the non-inductive bootstrap current as required for an efficient reactor system. The use of a conventional solenoid in a ST-based fusion nuclear facility is generally believed to not be a possibility. Solenoid-free plasma start-up is therefore an area of extensive worldwide research activity.
    [Show full text]
  • Olkiluoto 3: Framatome Teams All Set for Fuel Loading
    PRESS RELEASE March 26, 2021 Olkiluoto 3: Framatome teams all set for fuel loading March 26, 2021 – The Olkiluoto 3 EPR reactor completes a decisive stage of its commissioning. The Finnish safety authority (STUK) has authorized the fuel load for the Olkiluoto 3 EPR reactor. Loading operations led by plant operator TVO, with the support from AREVA and Framatome, can begin. "Fuel loading is a major milestone for the project. Reaching this milestone illustrates the expertise and know-how of our teams," said Bernard Fontana, CEO of Framatome. "Framatome's teams are fully mobilized alongside AREVA and TVO to finalize and deliver the nuclear power plant while meeting the highest safety and security standards. I thank them for their engagement.” To carry out the loading operations, an integrated team made up of approximately 40 employees from TVO, AREVA and Framatome has been formed. It includes around 15 fuel handlers, employees specializing in the fuel handling operations, and four neutronics engineers in charge of monitoring the core during loading. A total of 241 fuel assemblies manufactured in Framatome's plants in Germany and in France will be loaded in the reactor vessel to constitute the first core. The Areva NP and Areva NP GmbH Olkiluoto 3 project teams, who will later join Framatome, are supported by over 110 Framatome employees permanently based on the site, and by Framatome engineering teams located in France and in Germany. Completion of the fuel loading will be followed by a new series of hot functional tests before the first criticality and commissioning for commercial operation.
    [Show full text]
  • Specials Steels and Superalloys for Nuclear Industry
    Specials Steels and Superalloys for Nuclear Industry Enhancing your performance or almost 60 years Aubert & Duval has been a key partner for the development Aubert & Duval: Your partner F of forged and rolled products, especially those customized for the nuclear market. to energize your success With full vertical integration from melting, to remelting, hot converting and machining (rough machining through to near-net-shape parts), Aubert & Duval offers wide-ranging cutting edge capabilities for nuclear application. Equipment Process flow . MELTING Melting furnaces (EAF, AOD, LF) Melting up to 60 tons Vacuum Induction Melting (VIM) HPS NiSA up to 20 tons Remelting furnaces (ESR, VAR) up to 30 tons powder atomization (Gaz, VIM) . FORGING Open-die forging presses Remelting Powder atomization from 1,500 to 10,000 tons Closed-die forging presses from 4,500 to 65,000 tons . ROLLING MILL HPS 7-200 mm diameter bars High Performance Steels: Conversion . HEAT TREATMENT A range of alloyed steels with Solution and ageing furnaces tightly controlled characteristics HPS Ti NiSA AL PM Horizontal and vertical quenching offering optimum value for equipment customers. TESTING Forging Closed-die Hot Isostatic Immersion UT up to 13 tons and/or rolling Forging Forging Pressing (HIP) ©Valinox-Franck Dunouau (28,000 lbs) Automated contact UT up to 20 tons NiSA Aubert & Duval has also put in place over many decades dedicated skills to co-design re-engineered Nickel-base Superalloys: Nickel-based superalloys: materials metallurgical solutions with our clients. keeping high surface integrity while Sales of alloys and superalloys have progressively expanded across a broad spectrum of primary withstanding severe mechanical circuit contractors and their subcontractors.
    [Show full text]
  • Press Kit Inauguration of the Conversion Orano Tricastin BP 16 26 701 Pierrelatte Plant 10 September 2018
    Press kit Inauguration of the conversion Orano Tricastin BP 16 26 701 Pierrelatte plant 10 September 2018 Contacts Presse Nathalie Bonnefoy +33 (0)6 23 17 24 24 [email protected] Gilles Crest +33 (0)6 71 08 11 54 [email protected] www.orano.group Oranogroup EDITORIAL The plant we are opening today is a major industrial investment for Orano, for the French nuclear industry and for the industry of our country. ith the Georges Besse II enrichment plant on the same site, it is probably the largest industrial investment made in France in recent years. The Comurhex W II project was launched to give France an industrial facility offering cutting- edge safety, security, and environmental and industrial performance. A facility that gives us a global competitive advantage and guarantees an uninterrupted electricity supply for our markets. A tool integrating technological innovations in terms of safety, environment, and improvement of industrial performance: recycling of chemical reagents, reduction by 90% of water consumption, automated control-command system to improve the process control. It is an exceptional project that has required the best of our expertise from the teams of Orano Chemistry and Enrichment as well as Orano Projets, and throughout our group alongside our industrial partners. The project successfully completed at the same time as our group was reinventing itself to create a new flagship technology business to give nuclear materials all their value. While an important debate is taking place on France's multi-year energy program, the investment we have made in the Tricastin site and its plants shows the confidence we have in the future of nuclear energy.
    [Show full text]
  • The Jules Horowitz Reactor Core and Cooling System Design
    The Jules Horowitz Reactor core and cooling system design M. Boyard*, JM. Cherel**, C. Pascal*, B. Guigon*** * AREVA-Technicatome, 1100 rue Jean René Guillibert Gautier de la Lauzière 13100 Aix en Provence, FRANCE ** AREVA-Framatome-ANP, 9-10 rue Juliette Récamier 69006 Lyon, FRANCE *** Commissariat à l’Energie Atomique, 13108 Saint-Paul-lez-Durance cedex, FRANCE ABSTRACT The CEA (Commissariat à l’Energie Atomique) is planning to build a new MTR called the Jules Horowitz Reactor (JHR). JHR at Cadarache will become by 2014 and for decades a major research infrastructure in Europe for supporting existing power plants operation and lifetime extension as well as future reactor developments [1]. AREVA (Technicatome and Framatome- ANP) and EDF are performing the design studies. The JHR will be a tank pool type reactor using light water as coolant and moderator. The reactor has been designed to provide a neutron flux strong enough to carry out irradiation relevant for generations 2, 3 and 4 power plants: flexibility and adaptability, high neutron flux, instrumented experiments, loops to reproduce environments representatives of the different power plant technologies . Updated safety requirements and LEU fuel elements have been taken into account in the design of this high flux reactor. This paper presents the guidelines for the design of the main items, the various options considered and the choices made at the end of the detailed studies phase regarding: − Core shape, − Fuel element and core pitch, − Reflector and core-reflector interface, − Normal and emergency cooling systems, − Reactivity control system. MAIN OBJECTIVES OF THE REACTOR The “Jules Horowitz Reactor” (JHR) will be a structuring infrastructure of the European research area.
    [Show full text]
  • UST 1 Stellarator and Status of the 3D Printed UST 2 Stellarator* on Leave of Absence Vicente from NFL, Queral CIEMAT L 1 Outline
    UST_1 stellarator and Status of the 3D printed UST_2 stellarator Vicente M. Queral * Talk given in Columbia University, New York, NY, USA 1st October 2013 TM UST_1 stellarator and status of the 3D printed UST_2 stellarator* On leave of absence Vicente from NFL, Queral CIEMAT L 1 Outline Background Basic UST_1 and UST_2 data Design, construction and results in UST_1 ▪ Conceptual design of UST_1 ▪ Engineering design. Development of a construction method ▪ Validation of the construction method and design ▪ Results and conclusions Status of the 3D printed UST_2 stellarator ▪ Experimental validation of engineering concepts ▪ Conceptual design ▪ UST_2 engineering design. Fabrication tests ▪ Future work UST_1 stellarator and status of the 3D printed UST_2 stellarator Vicente Queral L 2 Background ► I am on a leave of absence period from the National Fusion Laboratory, CIEMAT, Spain. ► I worked in CIEMAT for almost 5 years, in Remote Handling, for IFMIF (International Fusion Materials Irradiation Facility), ITER and DEMO. ► Up to now, I have developed the work on stellarators on my own, with personal funds (for three years before CIEMAT work, at nights and weekends during CIEMAT work, and now 1.5 years during the leave of absence), with some help and contribution from CIEMAT. ► The work is R&D and innovation in engineering, focused in new construction methods for stellarators. It is not focused on physics and plasma experiments. UST_1 stellarator and status of the 3D printed UST_2 stellarator Vicente Queral L 3 Basic UST_1 data UST_1 modular stellarator • UST_1 stellarator was designed, built and operated from 2005 to 2007 in my personal laboratory. • Cost of the whole facility ~ 3000 € (many 2nd hand pieces).
    [Show full text]
  • Nuclear Disaster EPR ENGLISH
    Energy Watch Group c/o DWR eco GmbH Albrechtstr. 22 10117 Berlin +49 (30) 609898810 [email protected] www.energywatchgroup.org March 2018 The disaster of the European nuclear industry By Hans-Josef Fell and Eva Stegen The "European Pressurized Reactor (EPR)", once proclaimed to be a new impetus for the nuclear renaissance, turned out to be a disaster, characterized by safety deficiencies and cost explosions. The EPR construction sites in Flamanville, Olkiluoto and Hinkley Point C have already proved to be total failures even before their completion. Years of delays in commissioninG, serious safety deficiencies and skyrocketing construction costs characterize the projects. The further construction of these reactors could be secured only by means of multi-billion Euro state rescue packaGes. The EPR is a clear example of the failed nuclear industry, which causes extreme costs and is thus incapable of competinG with renewable enerGy. The current push for the development of a European fourth generation nuclear reactor will be a similar disaster to EPR’s and should therefore be stopped as soon as possible. This synopsis summarizes arguments, why a further expansion of nuclear enerGy should be stopped in order to avoid continuous cost explosions and billions of Euros in public debt, especially in light of siGnificantly cheaper renewable energies. In 1992, Germany and France (Siemens and AREVA1) launched the design process of a so-called third generation of nuclear reactors. A novel type of pressurized water reactor (European Pressurized Reactor, EPR) was developed.2 The EPR was supposed to be inherently safe. In 2006, the French nuclear reactor builder AREVA predicted a worldwide nuclear renaissance in which AREVA would sell around 200 EPRs.3 To date, however, the history of the EPR is nothing more than a story of unfinished pilot projects that are still failing to deliver electricity even a decade after construction began, tremendous cost overruns, court cases over electricity contracts that were not fulfilled, and unsolvable technical problems.
    [Show full text]