DOCSLIB.ORG

Indiana Oil and Natural

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Indiana Oil and Natural monitoring enforcement actions, and respond- dry hole ing to citizen complaints regarding oil and gas producing related operations. The section consists of a oil well OIL AND GAS Field Inspection Manager and nine Oil and Gas Inspectors. IN INDIANA anticline Orphaned and Abandoned Sites: Responsible for reviewing abandoned well sites shale seal for inclusion in a statewide list of sites qualifying oil for state closure action. The program manag- water sandstone es projects for well closure and site remedia- tion work on improperly abandoned oil and gas shale seal production facilities. Funding for the program is oil provided through annual well fees paid by In- water limestone diana operators, civil penalty assessments and forfeited bonds. Geologic cross-section Our Website For more information on the Division of Oil & Gas or the oil and gas industry in Indiana, see: INDIANA DEPARTMENT OF NATURAL RESOUCES dnr.IN.gov/dnroil Division of Oil & Gas Indianapolis Office 402 W. Washington St., W293 Indianapolis, IN 46204 Phone: 317-232-4055 Oil and Gas Fields of Indiana Rusty Retherford, Director [email protected] (Gas wells shown in red, oil wells in green, gas-storage wells in yellow.) Jim AmRhein, Asst. Director, Compliance and Enforcement Source: Indiana Geological and Water Survey [email protected] Beth Hernly, Assistant Director of Technical Services [email protected] Evansville Office 8215 Pollack Ave. DIVISION OF Evansville, IN 47715 OIL & GAS Phone: 812-853-8640 Fax: 812-853-8648 INDIANA Kevin York, Field Inspection Manager, [email protected] Our Mission: Encouraging the responsible development of Division of Oil & Gas Indiana’s oil and gas in a manner that is protective of public 317-232-4055 Drilling rig health and safety, and the environment dnr.IN.gov/dnroil HISTORY OF INDIANA’S OIL AND GAS FIELDS Chester Township, Wells County. Peak production Indiana’s natural gas was reached in 1904 and by 1906 a sharp decline production was 5.95 Trenton Field in production had begun. million MCF (thou- The oil and natural gas industry has been an im- sand cubic feet). As portant part of Indiana’s economy since 1886 when The Trenton Formation containing oil and natural a state, Indiana is significant quantities of gas were discovered in a gas is an Ordovician age limestone of an average ranked 26th in over- well drilled near Eaton in Delaware County. This thickness of 100’ and found at an average depth of all natural gas pro- discovery touched off a major “gas boom” from the 900’ in 21 counties in Indiana. duction in the U.S. Crude oil tank battery Trenton Field in east central Indiana that lasted until around 1910 by which time the gas had been Southwestern Indiana Fields The Division of Oil and Gas depleted by wasteful production methods. Crude oil is thought to have been first discovered Created in 1947, the Division of Oil and Gas is in commercial quantities in 1889 from a well drilled responsible for administering Indiana’s laws per- The natural gas from the Trenton Field played an in the center of Terre Haute although it wasn’t un- taining to the production of oil and natural gas. important role in attracting manufacturing interests til around 1940 that significant oil production be- These laws regulate petroleum exploration and to cities and towns throughout east-central Indi- gan in the oil fields of production operations including: well spacing, ana including Anderson, Muncie, Marion, Kokomo, southwestern Indiana. exploration, permitting, drilling, completion, pro- Peru, and Gas City. duction, plugging, and abandonment operations; The southwestern oil underground injection of fluids for enhanced oil Commercial crude oil production in the Trenton and gas fields are part recovery or for production fluid disposal; and the Field began in 1889 from a well near Keystone, of the Illinois Basin underground storage of natural gas or other pe- which also extends troleum products in underground formations. into Illinois and West- Crude oil pumping unit ern Kentucky. In Indi- The Division is organized into the following three ana, it consists predominately of sandstone res- program areas: ervoirs generally between 1,000’ to 3,000’ depths. Permitting and Compliance: Unlike the broad Trenton Field, oil and gas may Responsible for reviewing permit applications, be found in as many as 25 individual reservoirs, conducting file reviews of existing Class II injec- separated vertically or laterally, in one field. In all, tion wells, provides technical assistance to indus- more than 900 individual reservoirs are recog- try and the public, manages the division’s data nized in approximately 500 fields in southwestern processing system, reviews requests for well Indiana. spacing and drilling unit exceptions, develops di- vision programs, and prepares technical and rule Major production from the southwestern Indiana documents for consideration and promulgation. oil fields progressed rapidly following a 1938 dis- This section consists of an Assistant Director , covery in the Griffin Pool along the Wabash River and three Petroleum Geologists. in Gibson County. Field Services: Current Production Responsible for conducting site inspections, Old Trenton well drilled in the late 1800s In 2017, Indiana’s crude oil production was 1.78 witnessing well testing, plugging and abandon- million bbls. As a state, Indiana is ranked 23rd in ment operations, responding to and investigat- overall crude oil production in the U.S. In 2017, ing oil and produced water spills, initiating and .
Load more

Recommended publications
  • Equinor Environmental Plan in Brief
    Our EP in brief Exploring safely for oil and gas in the Great Australian Bight A guide to Equinor’s draft Environment Plan for Stromlo-1 Exploration Drilling Program Published by Equinor Australia B.V. www.equinor.com.au/gabproject February 2019 Our EP in brief This booklet is a guide to our draft EP for the Stromlo-1 Exploration Program in the Great Australian Bight. The full draft EP is 1,500 pages and has taken two years to prepare, with extensive dialogue and engagement with stakeholders shaping its development. We are committed to transparency and have published this guide as a tool to facilitate the public comment period. For more information, please visit our website. www.equinor.com.au/gabproject What are we planning to do? Can it be done safely? We are planning to drill one exploration well in the Over decades, we have drilled and produced safely Great Australian Bight in accordance with our work from similar conditions around the world. In the EP, we program for exploration permit EPP39. See page 7. demonstrate how this well can also be drilled safely. See page 14. Who are we? How will it be approved? We are Equinor, a global energy company producing oil, gas and renewable energy and are among the world’s largest We abide by the rules set by the regulator, NOPSEMA. We offshore operators. See page 15. are required to submit draft environmental management plans for assessment and acceptance before we can begin any activities offshore. See page 20. CONTENTS 8 12 What’s in it for Australia? How we’re shaping the future of energy If oil or gas is found in the Great Australian Bight, it could How can an oil and gas producer be highly significant for South be part of a sustainable energy Australia.
    [Show full text]
  • Frequently Asked Questions About Hydraulic Fracturing
    Frequently Asked Questions About Hydraulic Fracturing: What is hydraulic fracturing? Hydraulic fracturing, commonly referred to as fracing, is the process of creating small cracks, or fractures, in underground geological formations to allow oil or natural gas to flow into the wellbore and thereby increase production. Prior to initiating hydraulic fracturing, engineers and geoscientists study and model the physical characteristics of the hydrocarbon bearing rock formation, including its permeability, porosity and thickness. Using this information, they design the process to keep the resulting fractures within the target formation. In Colorado, the target formation is often more than 7,000 feet below the ground surface and more than 5,000 feet below any drinking water aquifers. To fracture the formation, special fracturing fluids are injected down the well bore and into the formation. These fluids typically consist of water, sand, and chemical additives. The pressure created by injecting the fluid opens the fractures. Sand is carried into the fractures by the fluid and keeps the fractures open to increase the flow of oil or natural gas to the well bore. The chemicals serve a variety of purposes, including increasing viscosity, reducing friction, controlling bacteria, and decreasing corrosion. Following the treatment, much of the fracturing fluid flows back up the well bore and is collected at the surface in tanks or lined pits. Why is hydraulic fracturing necessary in Colorado? Most of the hydrocarbon bearing formations in Colorado have low porosity and permeability. These formations would not produce economic quantities of hydrocarbons without hydraulic fracturing. Fracture treatment of oil and gas wells in Colorado began in the 1970s and has evolved since then.
    [Show full text]
  • Hydraulic Fracturing
    www.anadarko.com | NYSE: APC The Equipment: From Rig to Producing Well Hydraulic Fracturing Producing Well: 20+ Years Drilling Rig Anadarko Petroleum Corporation 13 www.anadarko.com | NYSE: APC Horizontal Drilling . Commences with Common Rotary Vertical Drilling . Wellbore then Reaches a “Kickoff Kickoff Point Point” ~6,300 feet Entry Point . Drill Bit Angles Diaggyonally Until ~7,000 feet the “Entry Point” . Wellbore Becomes Fully Horizontal to Maximize Contact Lateral Length with Productive Zones Anadarko Petroleum Corporation 14 www.anadarko.com | NYSE: APC Horizontal Drilling – Significant Surface‐Space Reduction Traditional Vertical Wells Horizontal Drilling Anadarko Petroleum Corporation www.anadarko.com | NYSE: APC Hydraulic Fracturing . Essential Technology in Oil and Natural Gas Production from Tight Sands and Shales . Involves Injecting a Mixture of Water, Sand and a Relatively Small Multiple Layers of 1+ Mile Separates Aquifer Amount of Additives Protective from Fractured Formation Under Pressure into Steel and Cement Targeted Formations . Pressure Creates Pathways, Propped Open by Sand, for Oil or Natural Gas to Flow to the Wellbore Anadarko Petroleum Corporation 16 www.anadarko.com | NYSE: APC Hydraulic Fracturing Equipment Water tanks Blender Blender Frac Van ellheadW ellheadW SdtkSand tanks Pump trucks 17 Anadarko Petroleum Corporation 17 www.anadarko.com | NYSE: APC Hydraulic Fracturing Technology Equipment Water Tanks Pump Trucks Sand Movers Blenders Frac Design Primarily Water and Sand Additives Include: . Gel (ice cream) . Biocide (bleach) . Friction reducer (polymer used in make‐up, nail and skin products) Anadarko Publicly Shares the Ingredients of All Hydraulic Fracturing Operations at www.FracFocus.org Anadarko Petroleum Corporation 18 www.anadarko.com | NYSE: APC Hydraulic Fracturing is Transparent .
    [Show full text]
  • Information on Hydraulic Fracturing
    an open pathway to the well. This allows the oil migration of fluids associated with oil and gas and gas to seep from the rock into the pathway, development. After it is determined that the well up the well and to the surface for collection. In is capable of producing oil or natural gas, a Colorado, the targeted formations for hydraulic production casing is set to provide an added fracturing are often more than 7,000 feet layer of separation between the oil or natural underground, and some 5,000 feet below any gas stream and freshwater aquifer. A well drinking water aquifers. survey called a cement bond log is performed to ensure the cement is properly sealed around the The process of hydraulic fracturing has been casing. Additionally, the COGCC requires that used for decades in Colorado, dating to the prior to hydraulic fracturing, the casing be 1970s. Hydraulic fracturing continues to be pressure tested with fluid to the maximum Colorado Department of Natural Resources refined and improved and is now standard for pressure that will ever be applied to the casing. virtually all oil and gas wells in our state, and The well’s construction design is reviewed by across much of the country. Hydraulic fracturing the professional engineering staff at the has made it possible to get the oil and gas out of COGCC. Any flaw in the design will be Information on rocks that were not previously considered as corrected prior to issuing the required drilling likely sources for fossil fuels. permit. Hydraulic Fracturing Common questions and answers about Q: What kinds of fluids do operators use to What is hydraulic fracturing? hydraulic fracturing.
    [Show full text]
  • Untested Waters: the Rise of Hydraulic Fracturing in Oil and Gas Production and the Need to Revisit Regulation
    Fordham Environmental Law Review Volume 20, Number 1 2009 Article 3 Untested Waters: The Rise of Hydraulic Fracturing in Oil and Gas Production and the Need to Revisit Regulation Hannah Wiseman∗ ∗University of Texas School of Law Copyright c 2009 by the authors. Fordham Environmental Law Review is produced by The Berkeley Electronic Press (bepress). http://ir.lawnet.fordham.edu/elr UNTESTED WATERS: THE RISE OF HYDRAULIC FRACTURING IN OIL AND GAS PRODUCTION AND THE NEED TO REVISIT REGULATION Hannah Wiseman * I. INTRODUCTION As conventional sources of oil and gas become less productive and energy prices rise, production companies are developing creative extraction methods to tap sources like oil shales and tar sands that were previously not worth drilling. Companies are also using new technologies to wring more oil or gas from existing conventional wells. This article argues that as the hunt for these resources ramps up, more extraction is occurring closer to human populations - in north Texas' Barnett Shale and the Marcellus Shale in New York and Pennsylvania. And much of this extraction is occurring through a well-established and increasingly popular method of wringing re- sources from stubborn underground formations called hydraulic frac- turing, which is alternately described as hydrofracturing or "fracing," wherein fluids are pumped at high pressure underground to force out oil or natural gas. Coastal Oil and Gas Corp. v. Garza Energy Trust,1 a recent Texas case addressing disputes over fracing in Hidalgo County, Texas, ex- emplifies the human conflicts that are likely to accompany such creative extraction efforts. One conflict is trespass: whether extend- ing fractures onto adjacent property and sending fluids and agents into the fractures to keep them open constitutes a common law tres- pass.
    [Show full text]
  • Drilling Deeper
    Drilling deeper Nia Kajastie looks at the evolution of underground drilling machinery and technologies, as well as the latest equipment releases for exploration, development and production applications Nia Kajastie 19 Dec 2016 10:00 Feature Underground drilling is a vital part of exploration and hard-rock mining activities across a wide range of applications, from diamond coring, short-hole drilling for development and long-hole drilling for production, to ground support to install rock bolts or cable bolts, secondary drilling and blasting to reduce oversize, or simply utility drilling. In line with the variety of possible functions, the Figure 1A Joy DR-1SB hydraulic jumbo drill, which features Intelsense drilling control system and hydrostatic drive for a requirements of drilling equipment for lower profile and tighter turning radius exploration, development and production are dependent on a number of factors. When it comes to exploration drilling, for example, target hole depths and core size are critical to choosing the best rig and tooling. The size of the drilling stations or tunnels is also important to the selection process. According to Boart Longyear, tooling is specific to the core size required. Rods come in different lengths – so you can use 5ft (1.5m) rods if you are drilling in a confined space. Likewise, core barrels come in 5ft or 10ft lengths (1.5m and 3m). On smaller, less powerful rigs, the company recommends freer cutting bits, while also considering the geological formation. The other factor to consider when selecting the right method, rig and tooling is the angle or dip of the hole.
    [Show full text]
  • Craig R. Ehlen 10929 Driver Drive Evansville, Indiana 47725
    Craig R. Ehlen 10929 Driver Drive Evansville, Indiana 47725 812/867-6164 (Home) 812/464-1785 (Office) 812/465-1044 (Fax) [email protected] Education: Doctor of Business Administration (DBA) — Southern Illinois University at Carbondale (1994) Dissertation title: “An empirical examination of the fairness of AICPA- mandated peer and quality review decision-making procedures and their effects on reviewees’ attitudes toward the AICPA and the reviewer” Master of Accounting Science (MAS) — University of Illinois at Urbana-Champaign (1969) Bachelor of Science in Accountancy (BS) — University of Illinois at Urbana-Champaign (1968) Professional Certifications: Chartered Global Management Accountant — Indiana (2012) Certified Fraud Examiner (CFE) — Indiana (1997) Certified Public Accountant (CPA) — Illinois (1968) Affiliations: American Accounting Association American Institute of Certified Public Accountants Association of Certified Fraud Examiners Indiana CPA Society University of Illinois Alumni Association Major Awards and Honors: Indiana CPA Society “Outstanding Educator” Award (2001) USI College of Business “Excellence in Research” Award (2006, 2003, and 1999) USI College of Business Student Learning and Teaching Innovation Fellowship (2006) USI College of Business R. Malcolm Koch Research Fellowship (1998) Indiana CPA Educational Foundation Doctoral Loan/Grant (1994/1995) AICPA Doctoral Fellow (1991/1992 and 1990/1991) Bronze Tablet Scholar — University of Illinois (1968) 1 Teaching Experience: 2002 — present: Professor of Accounting Department
    [Show full text]
  • LA Petroleum Industry Facts
    February 2000 Louisiana Petroleum Public Information Series No.2 Industry Facts 1934 First oil well of commercial quantities Deepest producing well in Louisiana: Texaco-SL urvey discovered in the state: 4666-1, November 1969, Caillou Island, The Heywood #1 Jules Clement well, drilled near Terrebonne Parish, 21,924 feet total depth Evangeline, Louisiana, in Acadia Parish, which S was drilled to a depth of approximately 1,700 Existing oil or gas fields as of December 31, feet in September 1901 (counties are called 1998: 1,775 Reserves “parishes” in Louisiana). Crude oil and condensate oil produced from First oil field discovered: Jennings Field, Acadia 1901 to 1998: 16,563,234,543 barrels Parish, September 1901 Crude oil and condensate produced in 1998: First over-water drilling in America: 132,376,274 barrels Caddo Lake near Shreveport, Louisiana, (Source: Louisiana Department of Natural Resources.) circa 1905 Natural gas and casinghead gas produced from First natural gas pipeline laid in Louisiana: 1901 to 1998: 144,452,229,386 thousand Caddo Field to Shreveport in 1908 cubic feet (MFC) Largest natural gas field in Louisiana: Natural gas produced in 1998: 1,565,921,421 Monroe Field, which was discovered in 1916 thousand cubic feet (MFC) (Source: Louisiana Department of Natural Resources.) Number of salt domes: 204 are known to exist, eological 77 of which are located offshore Dry Natural Gas Proven Reserves 1997 North Louisiana 3,093 billion cubic feet Parishes producing oil or gas: All 64 of South Louisiana 5,585 billion cubic feet Louisiana’s
    [Show full text]
  • History of Warrick and Its Prominent People : from the Earliest Time to The
    Class _L5J3l2^^ Copyright N^ COPYRIGHT DEPOSIT. HISTORY i>T O F W A R R I C K AND ITS PROMINENT PEOPLE From the Earliest Time to the Present; Together with Interesting- Biographical Sketches, Reminiscences, Notes, Etc. '^Uvo-v-. LLUSTRATED NINETEEN HUNDRED AND NINE CRESCENT PUBLICATION COMPANY '^9 1 B o o n \ i 1 e , Indiana b V \H^ ^ TO T TI A T () X E Whose encouragenienl aiul aid resulted in this work THIS V O L U iM E is (iratefullv Dech'iated. LIBRARY of CONGRESS Two COBies Received MAY 17 1909 Copyriunt tntry g COPYRIGHT 1909 NO CLASS A[ ^ XXc. BY MONTE M. KATTERJOHf PREFACE. Tliis volume is doubtless one with many faults, for no history extant is free from errors. Great care was taken in preparing the matter found herein, and all discrepancies were eradicated. I n- just criticism cannot rectify the errors that are sure to apjiear, and the author feels assured that all thoughtful jjeople will recognize and a])preciate the undertaking, also realize that a i)ublic benefit has been accomplished. The biographical sectioii is devoted to the record of men, living and dead. If it is incomplete, the fault cannot be justly attributed to the author. Many people were solicited, but on mone- tary grounds refused to support the publication. Those who read this book, and who know what constitutes a true history, will agree with the author that this volume is sujierior to any ever published in this county, inasmuch as its fine illustra- tions are a single history within themselves.
    [Show full text]
  • Chad/Cameroon Development Project
    Chad/Cameroon Development Project Project Update No. 30 Mid-Year Report 2011 Chad Export Project Project Update No. 30 Mid-Year Report 2011 This report has been prepared by Esso Exploration and Production Chad Inc., in its capacity as Operator of the Consortium and as Project Management Company on behalf of the Tchad Oil Transportation Company S.A. (TOTCO) and the Cameroon Oil Transportation Company S.A. (COTCO). Preface his Project Update, the thirtieth such report for the Chad Export Project (also referred to as the T Chad/Cameroon Development Project), covers the period from January through June, 2011. The report reflects the activities of the project operating company and its prime contractors, with a particular focus on compliance with the Environmental Management Plan (EMP). Several entities share responsibility for implementing the project. • Oilfield development and production in Chad is conducted by Esso Exploration and Production Chad Inc. (EEPCI) on behalf of the Consortium (Esso, Petronas, Chevron). • Pipeline activities in Chad are conducted by the Tchad Oil Transportation Company S.A. (TOTCO). • Pipeline activities in Cameroon are conducted by the Cameroon Oil Transportation Company S.A. (COTCO). • During construction, EEPCI provided project management services to TOTCO and COTCO. These reports are submitted through, and subject to verification by, the World Bank and Lender Group as a reporting requirement of the project’s partnership with the Bank and the two host countries. This report also represents a commitment to transparency by Esso and its co-venture partners. By publishing this information, the project wishes to make it possible for the World Bank and Lender Group, the citizens of the host countries, interested non-governmental organizations (NGOs) and others to stay well informed about the project as it unfolds.
    [Show full text]
  • Reserve Pits Mortality Risks to Birds
    U.S. Fish & Wildlife Service Reserve Pits Mortality Risks to Birds What is a Reserve Pit? How Do Reserve Pits A reserve pit is an earthen pit Kill Birds? excavated adjacent to a drilling rig and If the reserve pit is commonly used for the disposal of contains oil or oil- drilling muds and fluids in natural gas based products (i.e. or oil fields. The contents of a reserve oil-based drilling pit depends on the type of drilling mud fluids), the pit can used, the formation drilled, and other entrap and kill chemicals added to the well bore during migratory birds and the drilling process. other wildlife. During the drilling process, What is in a Reserve Pit? reserve pits probably Drilling fluids in reserve pits contain do not attract aquatic barium sulfate or barite, bentonite clay, migratory birds such lignosulfonates, and lignites. Drilling as waterfowl due to fluids in reserve pits can also contain human activity and diesel, mineral oil, glycols, chromium, noise. However, once zinc, polypropylene glycol, and the drilling rig and acrylamide copolymers. other equipment are Pedro Ramirez/USFWS Pedro removed from the Reserve pits remaining after well completion attract Fluids used in the hydraulic fracturing well pad, the reserve birds and other wildlife. of a well are sometimes stored in pit is attractive to reserve pits. Hydraulic fracturing birds and other wildlife. entraps birds in the pits and they die fluids can contain surfactants and from exposure and exhaustion. Birds other chemicals used to stimulate oil or Birds are attracted to reserve pits and other wildlife can also fall into natural gas flow.
    [Show full text]
  • Trends in U.S. Oil and Natural Gas Upstream Costs
    Trends in U.S. Oil and Natural Gas Upstream Costs March 2016 Independent Statistics & Analysis U.S. Department of Energy www.eia.gov Washington, DC 20585 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA’s data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the Department of Energy or other federal agencies. U.S. Energy Information Administration | Trends in U.S. Oil and Natural Gas Upstream Costs i March 2016 Contents Summary .................................................................................................................................................. 1 Onshore costs .......................................................................................................................................... 2 Offshore costs .......................................................................................................................................... 5 Approach .................................................................................................................................................. 6 Appendix ‐ IHS Oil and Gas Upstream Cost Study (Commission by EIA) ................................................. 7 I. Introduction……………..………………….……………………….…………………..……………………….. IHS‐3 II. Summary of Results and Conclusions – Onshore Basins/Plays…..………………..…….…
    [Show full text]