DOCSLIB.ORG

Titanium and Atomized Metal Powders for Press and Sinter, Mim, BIOCOMPATIBLE and Additive Manufacturing INCREASED FATIGUE STRENGTH ANTI-GALLING INCREASED LUBRICITY

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Titanium and Atomized Metal Powders for Press and Sinter, Mim, BIOCOMPATIBLE and Additive Manufacturing INCREASED FATIGUE STRENGTH ANTI-GALLING INCREASED LUBRICITY titanium and atomized metal powders for Press and sinter, MiM, BIOCOMPATIBLE and additive Manufacturing INCREASED FATIGUE STRENGTH ANTI-GALLING INCREASED LUBRICITY METEK SMP Eighty Four and Reading Alloys are global leaders in the production of Water and Gas Atomized stainless steel and high-alloy powders for P/M, Filtration, MIM, and Thermal Spray. In addition, Reading Alloys is the industry benchmark for Hydride/Dehydride (HDH) CP Ti, Sponge, and Ti 6/4 powders as well as Master Alloys for titanium and superalloy melting. AUSTENITIC STAINLESS STEEL HIGH PURITY HYDRIDE-DEHYDRIDE Standard grades include 303L, 304L, TITANIUM POWDERS 310L and 316L. Other grades available upon request. APPLICATIONS • Thermal Spray/Medical Powders - BIOCOMPATIBLE FERRITIC STAINLESS STEEL Ti sponge, Cp Ti, and Ti 6Al/4V Standard grades include 409, 410L, VARIOUS RANGES IN COLOR 420L 430L and 434L. Other grades • Ti powders for Powder Metallurgy available upon request. (P/M) applications EASILY IDENTIFY PARTS SPECIALTY ALLOYS • Ti powders for sputtering targets Nickel based, Cobalt based, Copper based, and custom alloys. tel: (+1) 724-225-8400 tel: (+1) 610-693-5822 email: [email protected] email: [email protected] www.powderclad.com www.readingalloys.com titanium and atomized metal powders for Press and sinter, MiM, and additive Manufacturing METEK SMP Eighty Four and Reading Alloys are global leaders in the production of Water and Gas Atomized stainless steel and high-alloy powders for P/M, Filtration, MIM, and Thermal Spray. In addition, Reading Alloys is the industry benchmark for Hydride/Dehydride (HDH) CP Ti, Sponge, and Ti 6/4 powders as well as Master Alloys for titanium and superalloy melting. AUSTENITIC STAINLESS STEEL HIGH PURITY HYDRIDE-DEHYDRIDE Standard grades include 303L, 304L, TITANIUM POWDERS 310L and 316L. Other grades available upon request. APPLICATIONS • Thermal Spray/Medical Powders - FERRITIC STAINLESS STEEL Ti sponge, Cp Ti, and Ti 6Al/4V Standard grades include 409, 410L, 420L 430L and 434L. Other grades • Ti powders for Powder Metallurgy available upon request. (P/M) applications SPECIALTY ALLOYS • Ti powders for sputtering targets Nickel based, Cobalt based, Copper based, and custom alloys. tel: (+1) 724-225-8400 tel: (+1) 610-693-5822 email: [email protected] email: [email protected] www.powderclad.com www.readingalloys.com POWDER EDITION CONTENTS Editorial Meet the ITA ...................................................... 6 Published by: Thank you Photo Contributors .................................. 10 International Titanium Association www.titanium.org Editorial: 1-303-404-2221 Telephone An ‘Inflection Point’ on the Horizon? Efforts Continue To Accelerate 1-303-404-9111 Facsimile the Advance of Titanium Powder Metal ................................11 [email protected] Email University of Utah Targets a Breakthrough to Produce Titanium Editor & Executive Director: Powder Metal Alloys .............................................. 14 Jennifer Simpson TITANIUM USA 2018 Executive Summary Report ......................... 16 Strategic Innovation Promotion Program in Japan Targets EDITORIAL OFFICES Development of Titanium Alloy Powder ............................... 20 International Titanium Association South Africa Moves Forward, Stakes Its Claim as a Hub PO Box 1300 for Titanium Powder Metal Innovation ................................ 22 Eastlake, Colorado 80614-1300 USA Remembering Career of an Industry Pioneer: Stanley Abkowitz Contributed to Development, Growth of Titanium Powder Metal ........... 24 ADVERTISING Five Poster Sessions Put a Spotlight on Work of University Scholars .......... 26 Ashleigh Hayden, Sales 1-303-404-2221 Ext. 3 Arconic, Airbus Pursue Research Agreement to Build [email protected] 3D Printed Aerospace Components .................................. 27 Save the Dates for Future Conferences ......................... 47 BUYER’S GUIDE INQUIRIES Colleague Announcements .....................................48 Karina Graziani, Member Services New Members .................................................. 50 1-303-404-2221 Ext. 1 From the Wire Carpenter Technology Corporation announced it has acquired LPW Technology . 54 DISTRIBUTION LIST New Consultant, Michael Shields, joins Cumberland .......................54 Join this free distribution World first claimed for 3D printing titanium car wheels ....................54 by emailing us at [email protected] Maanshan Iron & Steel Co., Ltd. rolls first bar on 3-roll RSB® 5.0 ............56 General Manager Hired to Oversee TACTIC Division of Laboratory Testing Inc. ..56 November 2018 PCC Metals Group Price Increase ......................... 57 Big Changes at Retech Systems LLC . 57 Buyers Guide .................................................... 59 Advertising Index ............................................... 94 www.titanium.org 4 TITANIUMTODAY 6-4 TITAnIUM AMS 4911, 4920, 4928 YOUR SOURCE FOR TITANIUMROUND BAR • PLATE • SHEET • BILLET FORGINGS • WELDING CONSUMABLES LCS MEET THE ITA Board of Directors Mike graduated from Hamilton College in 1981 with a BA in economics, and from Carnegie – Mellon University in 1983 ITA President with an MBA. Donald E. Larsen Interim Plant Manager, Ti-Ingot and Director, ITA Secretary/Treasurer Special Projects Education Committee Co-Chair Arconic Engineered Structures Titanium Europe Conference Chair Prof. Markus Holz Donald E. Larsen was formerly Vice President, R&D, General President, AMG’s Engineering Systems Division Manager Advanced Manufacturing for Arconic, a global CEO, ALD Vacuum Technologies GmbH technology, engineering and advanced manufacturing leader. In this role, he was responsible for leading R&D and Dr. Markus Holz was appointed President of AMG’s production teams working on priority titanium technology Engineering Systems Division and CEO of Vacuum projects, including 3D printing and advanced manufacturing Technologies GmbH as per October 2012. He joined the ALD activities. He also served as a liaison to the Arconic Technical Management Board in October 2011. Dr. Holz graduated in Center (ATC) and Arconic’s Whitehall Technology Center. Aerospace Engineering in 1986 and earned his PhD in 1992. Don retired Q3 of 2018, and has currently taken on the role Following his 10 years of service in the German Airforce, of Interim Plant Manager Ti-Ingot Operation and Director of Dr. Holz began his career with ThyssenKrupp in 1992, Special Projects. where he assumed several executive positions mainly in the Don joined the company in 1988 and has served in a stainless steel and special metals branch. In 1999, Dr. Holz number of roles focused on the research, development and became Managing Director of ThyssenKrupp Titanium production of titanium products. He has also held operational GmbH (formerly Deutsche Titan GmbH) and in 2002 he was and sales and marketing roles with the company. appointed Managing Director of ThyssenKrupp Titanium S.p.A. (formerly Titania S.p.A.). Furthermore, he was Don has a master’s degree in metallurgical engineering responsible for Tubifi cio di Terni, Italien, from 2004 through from The Ohio State University, and is the holder of 11 U.S. 2007. From 2007 to 2009 he was CEO of the ThyssenKrupp patents. He has published more than 30 technical articles in Titanium Group (Germany and Italy). In January 2010 the field of titanium. He is also a member of the International he joined the Managing Board of Hempel Special Metals, Titanium Foundation Board of Directors. Oberhausen, Germany. He is Honorary Professor at University of Applied Sciences Anhalt Teaching Operations Management. ITA Vice President Michael G. Metz ITA Past President President Henry S. Seiner VSMPO Tirus US Vice President – Business Strategy TIMET, Titanium Metals Corporation Michael Metz joined VSMPO - Tirus, US in November 2003 as Vice President, Commercial and was named President of Mr. Seiner, TIMET’s Vice President of Business Strategy, the organization in 2007. VSMPO is the largest producer of oversees the Marketing, Product Management, Purchasing titanium in the world, vertically integrated from titanium and Production Planning organizations for TIMET. In this sponge manufacture through melting and mill products such role, he has responsibility for and visibility into all aspects of as plate, sheet, bar, billet, wire, and welded and seamless TIMET’s supply chain. Henry is based in TIMET’s Toronto, tubing. In addition, VSMPO supplies titanium closed die OH facility — which is geographically and structurally in the forgings for airframe and engine applications. Mike has served middle of TIMET’s global supply chain. He has held various on the International Titanium Association Board of Directors positions in Production Planning, Manufacturing, Purchasing since 2007 holding the positions of Director, Vice President and Marketing in his 25 year tenure at TIMET. and President. Prior to coming to TIMET, Henry spent six years at U. S. He has significant experience in the titanium industry, Steel Corporation in Sales, Marketing and Production Planning. having had held positions in sales, distribution, product His educational background includes a Masters Degree from management, market research and forecasting at Titanium Carnegie Mellon University in Pittsburgh, PA and a Bachelor’s Metals Corporation from 1986 to 2003 before joining VSMPO. Degree from Duke University in Durham, NC. Henry is a native 6 TITANIUMTODAY Board of Directors (cont.) of Pittsburgh and continues to reside in Western Pennsylvania. titanium
Load more

Recommended publications
  • Regional Manufacturing Just Got Easier CATALYST CONNECTION MAKING YOUR FUTURE Annual Report 2016
    CATALYST CONNECTION MAKING YOUR FUTURE Annual Report 2016 Making Your Your Making Future Regional Manufacturing Just Got Easier CATALYST CONNECTION MAKING YOUR FUTURE Annual Report 2016 3 URE . T . J . U. U . F . S . T R. G U. O O. Y . T . E G . A N . I . S . I K . E . A . R . M . G . y . r . t . e . i . a . n . t . u e . Powered . r . BY CATALYST CONNECTION . m P . i . m t . t . o s . C b . u . g r . .. n g .. ..... .. ... ri h M ctu etals Manufa Making Your Future is a venture of Investing in Manufacturing Communities Partnership Your Making Future powered by Catalyst Connection CATALYST CONNECTION MAKING YOUR FUTURE Annual Report 2016 MAKING YOUR FUTURE: REGIONAL MANUFACTURING JUST GOT EASIER Making Your Future is a new initiative to help thousands of people 4 find a career in manufacturing. The first step is awareness. Manufactur- 5 ing is still one of the largest industries for employment in southwestern Pennsylvania and northern West Virginia, but few of the residents are aware of the variety of careers available for people of all experience levels URE and interests. In 2017, a new website will be created that targets adults . T . J . U. U . F . S . who would like to learn more about manufacturing career opportunities. T R. G U. The site will provide resources and links to other organizations that offer . O O. Y . T training, apprenticeships, and job search tools. Assessment tools and eval- . E G . uations will be available to help visitors learn which careers match their .
    [Show full text]
  • Previously Recommended Stocks
    The Prudent Speculator All Previously Recommended Stocks Important Information These pages display all stocks recommended in The Prudent Speculator since it began on 03/11/1977 through 08/31/2021. These 1929 stocks have an average annualized market appreciation of 17.5% {not counting dividends} with an average 6.39 year holding period and a 63.35% success {profitable} rate. Asterisks ”*” note changes of original recommended prices due to stock splits, mergers, spinoffs, or returns of capital. Gain/Loss stated is not representative of an individual’s performance. An individual investor’s performance would have and will vary based on the securities selected and timing of purchases and sales. Performance calculations are blithely offered as if they were the final and single result of a stock’s or portfolio’s gain over an arbitrary time period. Alas, there are many variables that may not be obvious but ought to be carefully considered for a more accurate accounting. Tax considerations are usually important to most investors but are rarely notes in ”total return performance” percentages. One portfolio gains 20% a year but ”turns over” 100% each year generating short-term gains taxed at high rates of 39% or more. Another portfolio holds shares for several years, so most of its returns are long term capital gains taxed at 20%. Year after year, the long-term portfolio’s gains are taxed less frequently and at lower rates so there is more after-tax capital gains remaining to reinvest, resulting in a significantly higher after-tax return, even though each portfolio showed 20% appreciation each year.
    [Show full text]
  • Postcard Collection Library
    Revised January 22, 2016 General Postcard Collection (GPCC) (See also: MSS#177 Papers of Margaret Deland MSS#389 Jewish Community Center of Greater Pittsburgh MSS#573 Rose Kaplan Papers MSS#66 Papers of the McClelland Family MSS#237 Papers of William M. McKillop MSS#860 Park-Kelly Family Papers and Photographs MSS#571 Paslawsky Family Papers and Photographs MSS#301 Richard E. Rauh Papers MSS#335 Papers of Aaronel deRoy Gruber MSS#204 Papers of Bill Green MSS#760 Britta C. Dwyer Papers MSS#773 Dwyer Family Papers MSS#938 Grete Zacharias Papers PSS#035 Howard Etzel Photograph Collection MFF#2944 Postcard Scrapbook of Dr. B. Heintzman, 1929 Acc. 1994.0001 Acc. 1994.0255 Acc. 1994.0285 Acc. 1995.0013 Acc. 1995.0014 Acc. 1996.0024 – Pittsburgh and Kittaning, Pa. postcards Acc. 1996.0084 Acc. 1996.0155 Acc. 1997.0040 Acc. 1997.0042 – Views of Pittsburgh Acc. 1997.0065 – Pittsburgh and Western Pennsylvania postcards Acc. 1997.0104 – Pittsburgh and Allegheny postcard album 1902 Acc. 1997.0201 – View of Pittsburgh 1849 Acc. 1997.0228 Acc. 1999.0163 Acc. 2001.0195 Acc. 2001.0243 Acc. 2002.0022 Acc. 2003.0186 Acc. 2004.0074 Acc. 2006.0096 Acc. 2008.0126 Acc. 2009.0170 Acc. 2010.0085 Postcard Collection Inventory, Page # 2 of 81 Acc. 2011.0171 – Interesting Views of Pittsburgh postcard book Acc. 2011.0218 – Pittsburgh and Western Pa. Acc. 2011.0292 – Gateway Center, Point, Downtown Acc. 2014.0017) (Book Resources: Search Postcard History Series in catalog Greetings from Pittsburgh: A Picture Postcard History/Ralph Ashworth - F159.3.P643 A84 1992 q A Pennsylvania Album: picture postcards 1900-1930/George Miller - F150.M648 long Riverlife: Postcards from the Rivers/Riverlife Task Force – HT177 .P5 P6 2002 long Box 1 Pittsburgh Aviaries Conservatory Aviary Churches All Saints Episcopal- Allegheny Bethany Evangelical Lutheran- East Liberty Bethel Presbyterian Calvary Episcopal – Shady/Walnut Calvary United Methodist – North Side Christ Evangelical Lutheran-East End Christ Church of the Ascension – Ellsworth & Neville Christ M.E.
    [Show full text]
  • The Deindustrialization of Pittsburgh in the 1980‟Sa
    RUTGERS, THE STATE UNIVERSITY OF NEW JERSEY SOLIDARITY LOST: THE DEINDUSTRIALIZATION OF PITTSBURGH IN THE 1980‟S A THESIS SUBMITTED TO THE HONORS HISTORY PROGRAM DEPARTMENT OF HISTORY BY: JENNIFER GOODIN FACULTY ADVISOR: PROFESSOR NORMAN MARKOWITZ NEW BRUNSWICK, NEW JERSEY MARCH 2012 1 Contents Introduction 1 Chapter 1. The Private Corporations 8 Chapter 2. The Government 25 Chapter 3. The American Public 38 Conclusion 55 Bibliography 57 2 Introduction It used to be that the streetlights were turned on in the middle of the day so folks could see through the thick smoke that the steel mills coughed up. The women would sweep the dark soot off their porches while the men marched off to work, as was customary in the Mon Valley. At the confluence of the Monongahela, Ohio, and Allegheny rivers, life in late 19th and early 20th century Pittsburgh revolved around steel production. Established by titans like Carnegie and Mellon, Pittsburgh industry provided, for those working in the mills, a rigorous but secure way of life, a system that “gave rise to a burgeoning, powerful middle class, and more than that, a sense that all of America shared in the economic boom, with the assembly line tethering us like an anchor to shared prosperity.”1 One generation after the next toiled away in front of glowing Bessemer furnaces, churning molten pig iron out into the steel that helped build America. Around the turn of the century steel unions struggled to establish a footing, suffering great losses such as the infamous 1892 Homestead Strike. During the 30‟s and 40‟s, aided by the wartime industrial boom, the unions began to gain power over management, winning higher wages and better conditions for themselves and their heirs.
    [Show full text]
  • Return of Private Foundation
    Return of Private Foundation OMB No 1545-0052 Form 990 -PF or Section 4947(a)(1) Nonexempt Charitable Trust Departmen,ol the Treasury Treated as a Private Foundation 2012 internal Revenue Service Note. The foundation may be able to use a copy of this return to satisfy state reporting requirements For calendar year 2012 or tax year beginning , and ending Nacre of foundation Employer identification number CONRAD N. HILTON FOUNDATION 94-3100217 Number and street ( or P 0 box numbor If mail Is not delivered to street address) Hoonvsulte B Telephone number 30440 AGOURA ROAD (818) 851-3700 City or town, state, and ZIP code C it exemption application pending , is check here ► AGOURA HILLS, CA 91301 G Check all that apply. Initial return L_J Initial return of a former public charity D 1. Foreign organizations, check here Final return Amended return 2 Foreign organizations meeting the 85% test, Q Address chang e Name change check here and attach computation H Check type of organization: LXJ Section 501(c)(3) exempt private foundation E If private foundation status was terminated Section 4947(a)(1) nonexempt charitable truster©' ther taxable private foundation under section 507(b)(1)(A), check here ► 0 I Fair market value of all assets at end of year ,J"AccounWmethod: L_J Cash LXJ Accrual F If the foundation is in a 60-month termination (from Part ll, col (c), line 16) ^ . Other (specify) un der section 507(b)( 1 )( B ), check here (Part 1, cplumn (d)fmust on cash ► $ 2 , 2 3 0 , 8 8 3.;0r2 4 .
    [Show full text]
  • A N N U a L R E P O
    ANNUAL REPORT 2015-2016 FISCAL YEAR OUR MISSION Board of Directors: To advance the safety and wellbeing of victims of intimate Sara Davis Buss partner violence and prevent and respond to intimate partner Chair violence through social change. Kit Needham Phyllis Stevens Vice Chairs Shirl’s Letter Patricia Cattrell For more than 40 years, Women’s Center & Shelter of Greater Pittsburgh (WC&S) has Treasurer worked to support victims of intimate partner violence. Each year brings new challenges and successes – making every year different than the last. The 15-16 fiscal Linda Thier Assistant Treasurer year was filled with preparation and anticipation – with many exciting changes that sit on the horizon for WC&S. These changes will ultimately allow us to better assist the Loretta Benec clients that we serve and make us stronger as an organization. WC&S hired Non-Profit Corporate Secretary Talent to do an organizational structure assessment and to recommend any changes that need to be implemented to accommodate infrastructure needs. This was a necessary Mary Anne Papale task as WC&S is constantly growing and we must ensure that we are equipped for the Recording Secretary future. Our Legal Advocacy Department, located in a separate building downtown, settled into their new office after many months of construction, all while we prepared Rachel Lorey Allen for our own upcoming building renovation aimed at reshaping our entire facility. Eunice Anderson Latasha Wilson-Batch With our own building renovations, we had to assess the way we use our Lisa Bonacci Patricia Cluss building and how it needs to change in order to serve more women and their children.
    [Show full text]
  • The Prudent Speculator All Previously Recommended Stocks
    The Prudent Speculator All Previously Recommended Stocks Important Information These pages display all stocks recommended in The Prudent Speculator since it began on 03/11/1977 through 12/31/2014. These 1826 stocks have an average annualized market appreciation of 17.36% {not counting dividends} with an average 6.28 year holding period and a 63.53% success {profitable} rate. Asterisks ”*” note changes of original recommended prices due to stock splits, mergers, spinoffs, or returns of capital. It should not be assumed that recommendations made in the future will be profitable or will equal the performance of the securities in these lists. Open Stocks: 124; Up: 93; Down or Unchanged: 31. Open Stocks Rec.Date Symbol Company.Name Rec.Price Last.Price GainLoss Hld.Per Annualized 2000−10−06 AAPL Apple $1.59 $110.38 6806.45% 14.2 34.62% 2005−11−30 ABT Abbott Labs $18.08 $45.02 148.97% 9.1 10.55% 2013−04−19 ABX Barrick Gold $18.17 $10.75 −40.84% 1.7 −26.55% 2003−04−30 ADM ArchDanMid $11.08 $52.00 369.31% 11.7 14.15% 2013−09−30 AEO American Eagle Outfitters $13.99 $13.88 −0.79% 1.2 −0.63% 2003−08−29 AET Aetna* $14.25 $88.83 523.36% 11.3 17.49% 2013−07−31 AGU Agrium $85.00 $94.72 11.43% 1.4 7.92% 2013−06−30 ALL Allstate $48.12 $70.25 45.98% 1.5 28.60% 2014−04−30 AMGN Amgen $111.75 $159.29 42.54% 0.7 69.56% 1998−08−31 AMSWA American Soft $2.75 $9.11 231.27% 16.3 7.60% 2011−11−30 ANH Anworth Mortgage $6.33 $5.25 −17.07% 3.1 −5.88% 2005−10−31 APA Apache Corp.
    [Show full text]
  • CONTENTS Editorial
    Now safely and effectively etch/prepare titanium for anodizing without using Hydrofluoric Acid! In use since 1993, join the growing number of medical, dental and jewelry users who’ve made the switch to a more environmentally sound process. Developed as a safe alternative to the dangers of Hydrofluoric acid, Multi Etch, with its pH of 6.8, has quickly become the favored safer etch to: •Remove surface oxides & contaminants on titanium which cause dull colors and block the full color range •Erase anodizing mistakes on titanium & niobium •Prepare platinum for soldering/welding •Enhance patterns on mokume and meteorite Anodized titanium treated with Multi Etch (top) and untreated (bottom) PO Box 890, Clarkdale, AZ 86324 [email protected], www.reactivemetals.com 928-634-3434 • 928-634-6734 fx CONTENTS Editorial Published by: Thank You To Our Photo Contributors . 5 International Titanium Association Meet the ITA . 6 www.titanium.org 1-303-404-2221 Telephone Welcome Letter – Ed Rosenberg . 8 1-303-404-9111 Facsimile [email protected] Email Editorial Is it Ethical to Use Advanced Materials in Sports Equipment? . 10 Editor & Executive Director: Titanium Eyewear, More Than A Material’s Reputation . 24 Jennifer Simpson Announcement From Bill Seeley . 32 Titanium Wind Harps . 34 EDITORIAL OFFICES Case Western Researchers Use Titania Nanotubes International Titanium Association To Develop Titanium Wire Micro-Supercapacitors . 38 11674 Huron Street, Suite 100 Steve Midgett Masters Ancient Japanese Craft To Northglenn, Colorado 80234 USA Produce Award-Winning Titanium Jewelry . 42 Women In Titanium Executive Profile: Akemi Tanabe . 46 ADVERTISING The Future Is Ultra-Light . 48 Ashleigh Hayden, Marketing Associate TITANIUM USA 2016 Executive Summary .
    [Show full text]