DOCSLIB.ORG

SRS Catalogue

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SRS Catalogue marine and architectural equipment Southern Rigging Supplies | T: 0870 803 4758 Ropes, wire, rigging screws 2-7 page 2 page 5 page 7 page 7 Rigging hardware 8 -27 page 8 page 16 page 18 page 20 Sail protection, shackles, hooks 28-37 page 29 page 30 page 34 page 36 Deck hardware, bailers, rings, pins, galvanised 38-49 page 38 page 42 page 45 page 49 Anchoring and mooring 50-54 page 50page 51 page 52 page 54 Deck covering, cockpit accessories, tapes, maintenance 55-64 page 55 page 56 page 59 page 63 page 64 For a full index see inside back cover 1 www.southernrigging.co.uk | T: 0870 803 4758 Rope Gleistein has been manufacturing high quality ropes and cords since 1824. Chosen by top European racing yachts, Gleistein is also specified by many major European production boat builders for its durability and easy handling characteristics. Ranging from the traditional Hempex to the ultra low stretch Dyna One, there is a specialist product for every application. For details please ask for our comprehensive technical brochure. Loads quoted are genuine, guaranteed, minimum breaking loads. DYNA ONE Ø min. reel Part no. mm b/l daN M GL-0904 4 1200 200 construction coated uncovered dyneema braid GL-0905 5 2300 200 stretch ultra low GL-0906 6 2700 200 flexibility good GL-0908 8 5000 200 spliceability very easy GL-0910 10 8500 200 application backstays/high load applications GL-0912 12 11500 200 advantages highest strength to weight ratio possible GL-0914 14 15500 200 GL-0916 16 20500 200 DYNEEMA GL-0204 4 700 200 construction dyneema core/polyester cover GL-0205 5 1200 200 stretch ultra low GL-0206 6 1650 200 flexibility good GL-0208 8 3000 200 spliceability suitable expertise required GL-0210 10 5100 200 application all running rigging/sheets & guys/ GL-0212 12 7500 200 high load applications GL-0214 14 9500 200 advantages ultra low stretch/high strength/ GL-0216 16 12000 200 good grip in clutches GL-0218 18 15000 200 GL-0220 20 19000 200 CARIBIC COLOUR construction dyneema core, polyester cover GL-1103 3 300 100 stretch ultra low GL-1104 4 650 100 flexibility good GL-1105 5 1100 100 spliceability difficult GL-1106 6 1700 100 application dinghy control lines advantages solid bright colours/ultra low stretch DYNA LITE GL-1006 6 1200 200 construction dyneema core/polyester cover GL-1008 8 1650 200 stretch ultra low GL-1010 10 3000 200 flexibility good GL-1012 12 5100 200 spliceability suitable expertise required GL-1014 14 7500 200 application all running rigging/sheets & guys/high loads GL-1016 16 9500 200 advantages lower cost than dyneema (lower strength)/ ultra low stretch/good grip in clutches CUP GL-0103 3 170 200 construction polyester braid GL-0104 4 350 200 stretch low GL-0105 5 600 200 flexibility good GL-0106 6 780 200 spliceability easy GL-0108 8 1300 200 application all running rigging/sheets & guys/ GL-0110 10 2200 200 general purpose GL-0112 12 3200 200 advantages lowest stretch possible for a polyester GL-0114 14 4600 200 rope GL-0116 16 6500 200 GL-0118 18 7700 200 GL-0120 20 8500 200 2 www.southernrigging.co.uk | T: 0870 803 4758 Rope GEMINI X Ø min. reel construction braid on braid polyester part mm b/l daN M stretch medium/low GL-0506 6 1100 200 flexibility excellent GL-0508 8 1500 200 spliceability easy GL-0510 10 2350 200 application sheets/general purpose GL-0512 12 3600 200 advantages extra flexibility/easy handling GL-0514 14 4500 200 GL-0516 16 6500 200 GL-0518 18 8300 200 GL-0520 20 10000 200 GL-0522 22 12200 200 TASMANIA construction double braid polyester GL-0606 6 820 200 stretch medium/low GL-0608 8 1200 200 flexibility excellent GL-0610 10 2000 200 spliceability easy GL-0612 12 2900 200 application sheets/general purpose GL-0614 14 3550 200 advantages economical/good flexibility GL-0616 16 4750 200 GL-0618 18 6100 200 GL-0620 20 8000 200 construction matt finish plaited polyester STANDARD SHEET stretch medium GL0706 6 450 200 flexibility good GL0708 8 750 200 spliceability relatively easy GL0710 10 1250 200 application sheets/general purpose GL0712 12 2000 200 advantages wooly texture/good grip/light weight GL0714 14 2500 200 GL0716 16 3500 200 POLYESTER construction laid or braided polyester part part Ø min reel stretch low/medium 3 strand sq. plait mm B/l daN M flexibility excellent GL-3006 - 6 580 220 spliceability easy GL-3008 - 8 1050 220 application mooring lines/anchor warps GL-3010 - 10 1680 220 advantages non floating/hardening, GL-3012 GL3112 12 2400 220 highly durable/flexible GL-3014 GL3114 14 3370 220 GL-3016 GL3116 16 4340 220 GL-3018 GL3118 18 5480 220 GL-3020 GL3120 20 6820 220 GL-3022 GL3122 22 8200 220 GL-3024 GL3124 24 9850 220 NYLON construction laid or braided nylon (polyamide) GL-4006 - 6 735 220 stretch high GL-4008 - 8 1320 220 flexibility good GL-4010 - 10 2040 220 spliceability easy GL-4012 GL-4112 12 2940 220 application mooring lines/anchor warps GL-4014 GL-4114 14 4020 220 advantages non floating/high stretch/alkali resistant GL-4016 GL-4116 16 5200 220 (braided) GL-4018 GL-4118 18 6570 220 GL-4020 GL-4120 20 8140 220 GL-4022 GL-4122 22 9800 220 GL-4024 GL-4124 24 11800 220 3 www.southernrigging.co.uk | T: 0870 803 4758 Rope GEOPROP part part Ø min reel construction laid or braided multifilament polypropylene 3 strand sq. plait mm b/l daN M stretch medium/high GL-2006 - 6 590 220 flexibility excellent (3 strand)/good (braided) GL-2008 - 8 1040 220 spliceability easy GL-2010 GL-2110 10 1530 220 application general purpose GL-2012 GL-2112 12 2170 220 advantages floating/soft texture (less durability) GL-2014 GL-2114 14 3000 220 high chemical resistance GL-2016 GL-2116 16 3700 220 GL-2018 GL-2118 18 4700 220 GL-2020 GL-2120 20 5700 220 GL-2022 GL-2122 22 7000 220 GL-2024 GL-2124 24 8200 220 THEMPEST part Ø min. reel construction laid polyester mix, special fibrillated mm b/l daN M polypropylene GL6006 6 550 220 stretch medium/low GL6008 8 1000 220 flexibility excellent GL6010 10 1500 220 spliceability easy GL6012 12 2300 220 application traditional yachts: halyards/sheets GL6014 14 3000 220 mooring lines GL6016 16 3900 220 advantages high abrasion resistance/relative high GL6018 18 4950 220 strength + low stretch/good UV resistance GL6020 20 6150 220 GL6022 22 7400 220 GL6024 24 8900 220 HEMPEX part part Ø B/L daN reel construction man-made fibre hemp 3 strand braided mm 3 strand braided M stretch medium/low - GL-5103 3 - 56 500 flexibility excellent (3 strand)/good (braided) - GL-5104 4 - 135 500 spliceability easy (3 strand)/difficult (braided) - GL-5105 5 - 210 500 application traditional yachts: sheets/mooring lines/ GL-5006 GL-5106 6 335 295 220 halyards (3 strand) cords & whipping twines GL-5008 GL-5108 8 595 470 220 (braided) GL-5010 GL-5110 10 900 740 220 advantages soft feel/traditional hemp appearance/good GL-5012 GL-5112 12 1340 990 220 UV resistance stronger than hemp GL-5014 - 14 1740 - 220 GL-5016 - 16 2180 - 220 GL-5018 - 18 2730 - 220 GL-5020 - 20 3420 - 220 THE GLEISTEIN SPLICING BOOK GL-5022 - 22 4100 - 220 An indispensable guide with easy to GL-5024 - 24 4830 - 220 understand instructions for the splicing GL-5026 - 26 5640 - 220 of Gleistein ropes. GL-5028 - 28 6470 - 220 Includes many new and old tricks of GL-5030 - 30 7300 - 220 the trade. Retail point of sale aid is also GL-5032 - 32 8300 - 220 available. GL-5036 - 36 10400 - 220 part GL-SB01 GL-5040 - 40 12900 - 220 MOORING LINES One eye spliced and pre-packed part Ø line length M yacht size WHIPPING TWINE mm 1 2 feet (black/blue/red/white/green) GL-8101/2 10 5 10 26 part Ø type reel mm M pack GL-8121/2 12 10 15 32 GL-9000 1 waxed 25 display box of 20 - mixed GL-8141/2 14 10 20 40 GL-9002 1 waxed 25 display box of 20 - white GL-8161/2 16 10 25 45 GL-9001 1.25 un-waxed 100 reel One colour as shown. 4 www.southernrigging.co.uk | T: 0870 803 4758 Wire ropes Only the best marine quality 316 stainless steel is used in the manufacture of our stainless steel wire. Using molybdenum alloy, which has exceptional resistance to corrosion, the wire is drawn down to size and carefully tempered to prevent work hardening which is the cause of 'needling' and magnetism - the first sign of brittleness. Supplied in multiples of 125m. Compacted Strand STAINLESS STEEL AISI 316 STAINLESS STEEL AISI 316 1 x 7 (ultra low stretch/high strength) PVC coated (white)1x19 part Ø mm break load kg part Ø mm break load kg BW-WD10725 2.5 670 BW-CW11946 4-6 1300 BW-WD10703 3 980 BW-CW11957 5-7 2000 BW-WD10704 4 1,700 STAINLESS STEEL AISI 316 Compacted Strand STAINLESS STEEL AISI 316 PVC coated (white)7x7 1 x 19 (ultra low stretch/high strength) BW-CW70746 4-6 1080 BW-WD11904 4 1,700 BW-WD11905 5 2,500 GALVANISED BW-WD11906 6 3,500 7 x 7 (medium flexibility) BW-WD11907 7 4,900 OR-G7702 2 278 BW-WD11908 8 6,100 OR-G77025 2.5 370 BW-WD11910 10 9,800 OR-G7703 3 629 BW-WD11912 12 14,200 OR-G7704 4 1120 OR-G7705 5 1750 STAINLESS STEEL AISI 316 OR-G7706 6 2520 1 x 19 (low stretch/high strength) OR-G7708 8 4136 BW-WR11915 1.5 200 BW-WR11902 2 320 GALVANISED BW-WR11925 2.5 500 6 x 19 (high flexibility) BW-WR11903 3 730 OR-G61903 3 498 BW-WR11904 4 1300 OR-G61904 4 885 BW-WR11905 5 2000 OR-G61905 5 1380 BW-WR11906 6 2800 OR-G61906 6 1990 BW-WR11907 7 3500 OR-G61908 8 3540 BW-WR11908 8 4600 OR-G61910 10 5530 BW-WR11910 10 7200 BW-WR11912 12 10,200 GALVANISED PVC COATED (clear)7x7 STAINLESS STEEL AISI 316 OR-GS025 2.5 - 5 435 7 x 7 (medium flexibility) BW-WR70715 1.5 155 MONEL SEIZING WIRE BW-WR70702 2 240 part Ø mm per 10 pk BW-WR70725 2.5 400 OR-M200001 0.9 10m reel BW-WR70703 3 550 BW-WR70704 4 1000 BW-WR70705 5 1500 BW-WR70706 6 2000 BW-WR70708 8 3880 BW-WR70710 10 5,900 STAINLESS STEEL AISI 316 7 x 19 (high flexibility) BW-WR71902 2 230 BW-WR71925 2.5 360 BW-WR71903 3 510 BW-WR71904 4 900 BW-WR71905 5 1420 BW-WR71906 6 2050 BW-WR71907 7 2700 BW-WR71908 8 3600 BW-WR71910 10 5,500 BW-WR70712 12 8,000 5 www.southernrigging.co.uk | T: 0870 803 4758 Swaging Machines WIRETEKNIK PORTABLE ROLL SWAGERS Fully approved by Lloyds Register of Shipping, Wireteknik have become the world standard in roll swaging machines.
Load more

Recommended publications
  • Swageless Mechanical Fittings Or Swage Terminals… – the Rigging Company Page 1 of 15
    Swageless Mechanical Fittings or Swage Terminals… – The Rigging Company Page 1 of 15 THE RIGGING COMPANY MENU Phone Us 443-847-1004 SWAGELESS MECHANICAL FITTINGS OR SWAGE TERMINALS… …Which do you prefer? When talking about wire standing rigging for sailboats, there are two primary ways to secure a fitting to the end of the cable, the swage fitting and the mechanical fitting. One requires a specialized, expensive ma- chine (pictured below) that is used to essentially squeeze or hammer the fitting onto the wire, this is called the swage fitting. The other simply re- quires the use of some wrenches (a vise is a great tool here too), some thread locker, a bit of patience, and some experience wouldn’t hurt ei- ther ;0). The latter is referred to as the mechanical or swageless fitting. SWAGE FITTINGS: https://theriggingco.com/2016/11/14/mechanical-or-swage/ 2019-10-29 Swageless Mechanical Fittings or Swage Terminals… – The Rigging Company Page 2 of 15 High quality swage fitting manufacturers used by The Rigging Company (TRC) include: Hayn, Alexander Roberts Co., Stalok, C Sherman John- son, Global BSI, and up until recently Gibb a parent company of Navtec. A swage fitting has more length and is a slimmer design than the equivalent swageless fitting. Swage fittings have a long drilled shaft relative to the wire’s diameter (diagram 1). The depth of the shaft dic- tates how much wire will end up buried inside of the fitting prior to swaging. Once the wire is inserted into the fitting, the fitting is then rolled through (or hammered by) a set of dies, to squeeze the fitting onto the wire.
    [Show full text]
  • Dictionary.Pdf
    THE SEAFARER’S WORD A Maritime Dictionary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Ranger Hope © 2007- All rights reserved A ● ▬ A: Code flag; Diver below, keep well clear at slow speed. Aa.: Always afloat. Aaaa.: Always accessible - always afloat. A flag + three Code flags; Azimuth or bearing. numerals: Aback: When a wind hits the front of the sails forcing the vessel astern. Abaft: Toward the stern. Abaft of the beam: Bearings over the beam to the stern, the ships after sections. Abandon: To jettison cargo. Abandon ship: To forsake a vessel in favour of the life rafts, life boats. Abate: Diminish, stop. Able bodied seaman: Certificated and experienced seaman, called an AB. Abeam: On the side of the vessel, amidships or at right angles. Aboard: Within or on the vessel. About, go: To manoeuvre to the opposite sailing tack. Above board: Genuine. Able bodied seaman: Advanced deckhand ranked above ordinary seaman. Abreast: Alongside. Side by side Abrid: A plate reinforcing the top of a drilled hole that accepts a pintle. Abrolhos: A violent wind blowing off the South East Brazilian coast between May and August. A.B.S.: American Bureau of Shipping classification society. Able bodied seaman Absorption: The dissipation of energy in the medium through which the energy passes, which is one cause of radio wave attenuation. Abt.: About Abyss: A deep chasm. Abyssal, abysmal: The greatest depth of the ocean Abyssal gap: A narrow break in a sea floor rise or between two abyssal plains.
    [Show full text]
  • Importers and Wholesalers of Stainless Steel Hardware and Wire Rope Fittings, Swage Presses and Associated Machinery. Grade 50 Load Rated Lifting Chain and Components
    Importers and Wholesalers of Stainless Steel Hardware and Wire Rope Fittings, Swage Presses and associated machinery. Grade 50 load rated lifting chain and components. BRIDGE & COMPANY PTY LTD 37 Taree Street Burleigh QLD 4220 Telephone: (07) 55 935 688 Fax: (07 55 935 872 Email: [email protected] www.bridco.com.au This catalogue contains a comprehensive range STAINLESS STEEL LIFTING COMPONENTS: INTRODUCTION of quality stainless steel components for virtually High quality 316L grade Stainless Steel products, all rigging and architectural requirements. rated specifically for the lifting industry. High grade chain, hooks, rings and shackles. Using this catalogue Some products in this catalogue have been TALURIT SWAGE CLAMPS: tested for strength. These are measured in 2 EN standard aluminium clamps for wire rope different ways. swaging. Hydraulic clamps in copper and TDL (Tested Deformation Load) is the load at stainless steel. which the product starts to deform. WIRETEKNIK: BS (Breaking strength) is the load at which the Roll swage machines for terminal swaging. product breaks. Due to the low yield strength of Variety of sizes available, top quality. Lloyd’s stainless steel, deformation will often occur at approved. much lower loads than the breaking strength, depending on the product, e.g. a forged 10mm CLAMP PRODUCTS: stainless steel shackle will have a breaking load Wide range of quality hand swage ferrules and of approximately 5500kg, with deformation tools. of the shackle beginning at 1600kg, whereas a grade “S” steel shackle in the same physical CROMOX RANGE: size might have the same breaking load, but the Grade 50 & 60 rated lifting gear.
    [Show full text]
  • 2865 NAV] Navtec Catalogue 0 Cover and Contents 1.Indd
    The Rigging Solution of Lewmar Marine Fiber Systems | Rod Systems | Wire Systems | Hardware | Hydraulics The trusted rigging solution of choice for cruising, racing, and superyachts A heritage of proven performance and reliability has been tested to the extreme by generations of America’s Cup contenders, the results of which are applied to the entire Navtec Range. Cutting edge research and component technology combine with a close attention to detail, resulting in a durable, high quality rigging solution. From your initial enquiry, through manufacture and installation, to sailing in the fi eld, the Navtec Sales Team offers you technical guidance and support. Drawing upon the expertise of the Navtec Research & Development Team and the Navtec Engineering Team, your dedicated Sales Advisor will ensure that you specify the most suitable product for the application. Following installation, a global service network and a three year warranty ensures that you will receive assistance, wherever you are in the world. 2 www.navtec.net Contents 1. Fiber Systems 2. Rod Systems 3. Wire Systems 4. Navtec Hardware 5. Hydraulics 6. Lewmar 7. Rig Care 3 Technical Introduction Navtec Global Service With a global network of factory and repair locations, and factory-authorised independent service agents, Navtec offers after sales support wherever you are in the world. To identify your local Navtec contact, please go to www.navtec.net and click on Contact Us. Navtec Part Numbers Imperial Part Numbers: Metric Part Numbers: All measurements are in 32nds of an inch
    [Show full text]
  • Rigging Hardware
    RIGGING HARDWARE www.bluewave.dk Welcome to the Blue Wave Marine Catalogue. Information and contact You are kindly asked to contact your local Blue Wave dealer/distributor, or Blue Wave direct, should you have any questions or need further documentation. Blue Wave A/S Blue Wave - Australia Pty Ltd H.C. Oerstedsvej 2 Unit 3/75 Casua Drive DK 6100 Haderslev Varsity Lakes QLD 4227 Denmark Australia Mail: [email protected] Mail: [email protected] Homepage: www.bluewave.dk Homepage: www.bluewaveaus.com Phone: + 45 73 22 14 14 Phone: + 61 7 5593 8178 Fax: + 45 73 22 14 24 Fax: + 61 7 5593 7365 Blue Wave Rigging Hardware We have been in business since 1932 with headquarter located in Haderslev, Denmark, Blue Wave A/S is currently in its third generation, as a family owned and lead Manufacturing Company. The Blue Wave crews consist of 60 dedicated and skilled employees, some of them has been with us for more than 20 years. We are currently among the top three largest manufacturers of high quality stainless steel rigging hardware in the world. Our focus has for years been the Marine, Architectural and Industrial sectors. In the fifties Blue Wave mainly produced shackles and thimbles, later on came the wire fittings and in the nineties the rod program was introduced. By constant development and investments in high tech production machinery, focus on customer needs and wishes, a well known brand name has been established. Today Blue Wav’s product range covers one of the most extensive ranges of stainless steel wire fittings, ranging from 2mm to 32mm.
    [Show full text]
  • Wire & Rod Turnbuckles & Terminations for Sailing Yachts
    wire & rod turnbuckles & terminations for sailing yachts www.petersen-stainless.co.uk Contents Company Overview 03 Turnbuckles And Rigging Screws 20 Guard Rail Fittings, Pins & Spares 38 Turnbuckle Bodies Open And Closed Design 21 Stainless Steel Wire Rope & Nitronic 50 Rod 05 Stainless Steel Clevis Pin Including Split Pins and Split Rings 39 Turnbuckles GT Body With Swage Stud And Toggle 22 Stainless Steel Nut Round Locking Nuts And Nitronic 50 Straightened and Polished Rod 06 Turnbuckles GT Body With Compression Stud And Toggle Hexagonal Locking Nuts Construction 1X19 Turnbuckles GT Body With Swage Stud And Eye 23 Stainless Steel Grade 316 Halyard Cleat 40 Construction Compacted Strand 1X7 Turnbuckles GT Body With Swage Stud And Stemball Stainless Steel Grade 316 Lacing Eyes Construction Compacted Strand 1X19 Turnbuckles GT Body With Toggle And Fork 24 Stainless Steel Grade 316 Boat Rings Construction Compacted Strand 1X36 Turnbuckles GT Body With Fork And Eye Stainless Steel Thimbles 41 Construction Compacted Strand 1X31 Turnbuckles GT Body With Toggle Blank 25 Wire Rope Clips - Stainless Steel 316 Construction 7X7 07 Rigging Screw Closed Body With Stud And Toggle 26 Guard Rail/ Life Line Studs, Pelican Hooks and Gate Eyes 42 Construction 7X19 Rigging Screw Closed Body With Compression Stud Metric Swaging Diameters and Toggle rod rigging fittings 43 Rigging Screw Closed Body With Stud And Fork 27 Stainless Steel Swage Fittings 08 Rigging Screw Closed Body With Stud And Eye Rod Caps 44 Rigging Screw Closed Body With Fork And Toggle
    [Show full text]
  • Hayn Wire Rigging Catalog
    PROFESSIONAL PARTNER EDITION HAYN WIRE RIGGING MANUFACTURER OF QUALITY HARDWARE WWW.HAYN.COM About Us: Hayn has been engineering and manufacturing marine, www.hayn.com architectural, and industrial rigging hardware since the | late 1950’s. Hayn’s commitment to advanced automation, latest design technology, and manufacturing techniques give us a distinct advantage over our competitors. Hayn offers short lead-times for both our standard products as well as custom components. Hayn’s corporate culture 800.441.4296 includes a highly specialized team that endlessly seeks opportunities for improvement to quality and product features, as well as customer service. | fax | fax Product Traceability / Quality Control: All Hayn products have full traceability including raw material certificates and certificates of conformity. Requirements for this documentation should be indicated 800.346.4296 at time of order. Hayn employs a comprehensive tel tel quality system that includes thorough review of any non-conformance of products, internal processes, etc. Specifications: Product specifications are subject to change without notice. Catalog images are representative of the product type/family and may not reflect the item purchased. Product drawings are available upon request which include the most recent and accurate information available. Custom Rigging Products: Hayn carries a comprehensive standard product offering. In the event that the products required for your rigging application differ from those that are standard catalog items, Hayn will produce custom components to your specifications. Please contact us for pricing and lead-times. BY HAYN ENTERPRISES, LLC HAYN BY HAYN MARINE HAYN 2 Customer Service: Returns: Our dedicated, knowledgeable sales staff is continually Special order or custom items may not be returnable.
    [Show full text]
  • 034-037 JURY RIGGING.Indd
    PRACTICAL SEAMANSHIP DismastingDismasting checklist DISMADISMASTEDSTED – IMMEDIAIMMEDIATETE AACTIONCTION It is vital that the moment the mastmast goes overover rig, and where the mast and boom are lying. been cut away fi rst. You may be able to save the the side someone, preferably the skipper, or • If the mast is overboard with a sharp, broken jib; you are unlikely to save the main. a crew member with previous experience, end there is a real risk the hull could be holed. In • If the mast has fallen on deck, secure it takes charge. The yacht and crew are in grave big seas it will almost certainly be too dangerous immediately. Then attend to any sails that have danger in the immediate aftermath. Here is a to try to secure the mast and boom or to lift fallen overboard. Dump them rather than risk suggested plan of action. them on deck, so cut the rigging and let it sink, or crew injury trying to recover them. • Don’t panic. Don’t start the engine – there will stream it as a sea anchor if conditions allow. • Check there are no wires, ropes or sails left be wire and rope in the water. • In calmer conditions anything you can save, in the water to foul the prop. You can now start • Hold an immediate roll-call, check for particularly the boom or a substantial length of the engine. personal injuries and assess the physical and mast, may be invaluable for a jury rig. Use rope • Depending on howhow ffarar youyou areare fromfrom a safsafee mental state of the crew.
    [Show full text]
  • NAVTEC Catalog 1999
    NAVTEC NORSEMAN GIBB CONTENTS Navtec Norseman Gibb now designs, manufactures (ISO 9002 accredited) and distributes a wider range of rigging and hydraulic products than ever before. Manufacturing plants are 2 STAINLESS STEEL WIRE located in both England and the US. With wholly owned 3 DYFORM distribution and service facilities located in England, France and the US, Navtec Norseman Gibb is well positioned to 4 SOLID ROD service all your rigging and hydraulic requirements. 5 COMPOSITE FIBRE ROD & CABLE 6 NORSEMAN SWAGELESS TERMINALS 8 SWAGELESS FITTING METHOD 9 NORSEMAN INSULATORS DESIGN Product development and design is 10 NORSEMAN ROD STUDS based on extensive research and 11 SWAGE TERMINALS testing, customer feedback and our 14 MAST TERMINAL SYSTEMS own experiences. The Engineering 16 TURNBUCKLES and Sales teams are comprised of 20 TOGGLES active racing and cruising sailors with lengthy sailing resumes 21 SHACKLES including several America’s Cup 23 SNAP SHACKLES campaigns. Only after we satisfy ourselves do we introduce 24 SUPERSNAPS new products. No other rigging company is driven by sailors 25 SAFETY HOOKS themselves. 26 LIFELINE & SAFETY FITTINGS 28 PLATES, ADJUSTERS, U-BOLTS & PAD EYES 29 SWAGING MACHINES & SAIL SAVERS PRODUCTION 30 ROD STEMBALLS, SPREADER BENDS The very latest in CNC machining 32 ROD TERMINATIONS equipment is installed in our 34 TANGS production facilities. This offers both modern manufacturing 36 SPREADER TIP CUPS efficiency and repeatable accuracy 38 TIP TURNBUCKLES resulting in unequalled product 40 TURNBUCKLES - ROD & WIRE quality. 44 INSULATORS Our Retford plant is also ISO 9002 accredited. 45 LOAD METER SYSTEMS 46 FIBRE CABLE TERMINATIONS 48 HYDRAULIC SYSTEMS SERVICE 50 SYSTEM 50 HYDRAULIC PANEL We recognise and value the 51 SYSTEM VII HYDRAULIC PANEL importance of quality service.
    [Show full text]
  • Stainless Steel Product Catalogue
    STAINLESS STEEL PRODUCT CATALOGUE www.bridco.com.au Introduction This catalogue contains a comprehensive range of quality stainless steel components for virtually all rigging and architectural requirements. Using this catalogue. Some products in this catalogue have been tested for strength. These are measured in 2 different ways.TDL(Tested Deformation Load) is the load at which the product starts to deform. BS (Breaking Strength) is the load at which the product breaks. Due to the low yield strength of stainless steel, deformation will often occur at much lower loads than the breaking strength, depending on the product. Eg. A forged 10mm stainless steel shackle will have a breaking load of approximately 5500kg, with deformation of the shackle beginning at 1600kg, whereas a grade “S” steel shackle in the same physical size might have the same breaking load, but the deformation load could be as high as 4000kg. Stainless Steel components can not be compared with rated lifting components and should not be proof tested under the same guidelines. BRIDCO RANGE: Quality fittings that are extremely well priced. Regular batch tests are conducted for chemical analysis, deformation loads and sizing tolerances. Many of the Bridco products have been specially marked to identify sizing. Many of these items are marked “BRIDCO” or a with a BRIDGE image to ensure you have genuine products. JAKOB RANGE: High quality swiss products specifically designed for architectural and structural applications. Wide range to suit almost any application, Jakob are known world wide for quality. Full Product Catalogue Available. STAINLESS HANDRAIL FITTINGS: A full range of Stainless Steel modular railing systems and glass clamps.
    [Show full text]
  • Stainless Steel Hardware and Wire Rope Fittings
    SECTION ONE Stainless Steel Hardware and Wire Rope Fittings PAGE Shackles and swivels 6 – 9 Chain 10 - 11 Clips and hooks 12 - 14 Blocks and sheaves 16 - 17 Fastenings 18 - 20 Rings and rigging 21 - 22 Eye nuts and bolts 22 - 24 Wire rope 26 - 27 Wire rope fittings 28 - 45 BRIDGE & COMPANY PTY LTD 37 Taree Street Burleigh Heads QLD 4220 Height safety fittings 46 - 47 Telephone: (07) 55 935 688 Fax: (07) 55 935 872 Email: [email protected] www.bridco.com.au SS Hardware & Wire Rope fittings SECTION ONE STANDARD DEE SHACKLE Code A B D L1 L2 B.L (kg) SS-360F-05 4.8 10.8 9.8 18 30 1000 SS-360F-06 5.8 13.5 12 21 36 1700 SS-360-07 6.8 14.5 13.5 24.2 41.3 2000 SS-360F-08 7.6 17.3 15.9 29.7 48.2 2500 SS-360F-10 9.7 22.5 20 35.7 60 4100 SS-360F-12 11.6 27 23.7 43.1 70 5400 SS-360-16 16 32 31.8 56 95 10000 SS-360-19 19 38 37.6 66 110 15000 ABOVE ITEM IS AVAILABLE IN THE BRIDCO LOAD RATED RANGE OF SS-360-25 24.7 50.4 49.7 87 148.7 23000 COMPONENTS. SS-360-32 31.2 64.4 64.6 110.1 190 26000 SEE PAGE 48 FOR FURTHER DETAILS. F = FORGED CAPTIVE PIN DEE SHACKLE Code A B D L1 L2 B.L (kg) SS-360LK-06 5.2 13.2 11.3 22.2 36 1700 SS-360LK-08 8.2 15.8 15.7 28 48 2500 SS-360LK-10 9.9 19.8 19.2 35 58.2 4100 OVERSIZE PIN DEE SHACKLE Code PIN BODY L1 B D L2 B.L (kg) SS-3611-103 11.00 3/8” 31.9 15.9 23.5 57.5 4900 SS-3611-1035 12.5 7/16” 38 20.6 28 70 7300 SS-3611-104 15.7 1/2” 42.5 20.6 31.3 78 9900 SS-3611-105 19.0 5/8” 49.7 27.0 39.2 95.5 13000 SHACKLES AND SWIVELS SHACKLES BOW SHACKLE Code S B D W L1 L2 B.L (kg) SS-370F-03 2.9 6.3 7 9.1 13 19.3 400 SS-370F-05
    [Show full text]
  • Marine Catalogue 2020
    MARINE CATALOGUE 2020 WWW.BLUEWAVE.DK RIGGING HARDWARE Information and contact You are kindly asked to contact your local Blue Wave dealer/distributor, or Blue Wave direct, should you have questions or need further documentation. Blue Wave A/S H.C. Oerstedsvej 2 DK 6100 Haderslev Denmark Email: [email protected] Website: bluewave.dk Phone: + 45 73 22 14 14 BLUE WAVE RIGGING HARDWARE We have been in business since 1932 with headquarter located in Haderslev, Denmark, Blue Wave A/S is currently in its third generation, as a family owned and lead Manufacturing Company. The Blue Wave crews consist of 30 dedicated and skilled employees, some of them has been with us for more than 40 years. We are currently among the top three largest manufacturers of high quality stainless steel rigging hardware in the world. Our focus has for years been the Marine, Architectural and Industrial sectors. In the fifties Blue Wave mainly produced shackles and thimbles, later on came the wire fittings and in the nineties the rod program was introduced. By constant development and investments in high tech production machinery, focus on customer needs and wishes, a well known brand name has been established. Today Blue Wave’s product range covers one of the most extensive ranges of stainless steel wire fittings, ranging from 2 mm to 36 mm. Key factor for Blue Wave’s future development and production, is a continued development driven by customer demand. Applying efficient production, good design, low weight and optimal strength to its products. Blue Wave strives to become the number one chosen supplier of rigging hardware.
    [Show full text]