Nr. Standard reference Title Systems and software engineering - Requirements for testers 1 ISO/IEC/IEEE 26513:2017 and reviewers of information for users Information technology - Process assessment - Process 2 ISO/IEC TS 33073:2017 capability assessment model for quality management Information technology - Security techniques - Information 3 ISO/IEC 27019:2017 security controls for the energy utility industry Information technology - Security techniques - Competence 4 ISO/IEC 27021:2017 requirements for information security management systems professionals Information technology - Security techniques - Electronic 5 ISO/IEC 27050-3:2017 discovery - Part 3: Code of practice for electronic discovery Information technology - Coding of audio-visual objects - Part ISO/IEC 14496-16:2011/Amd 6 16: Animation Framework eXtension (AFX) - Amendment 4: 4:2017 Pattern-based 3D mesh coding (PB3DMC) Information technology - Underwater acoustic sensor network 7 ISO/IEC 30140-2:2017 (UWASN) - Part 2: Reference architecture Paper and board - Determination of moisture content of a lot - 8 ISO 287:2017 Oven-drying method Ships and marine technology - Marine environment protection - 9 ISO 21070:2017 Management and handling of shipboard garbage Steel sheet, cold-reduced, of higher yield strength with improved 10 ISO 13887:2017 formability Agricultural machinery - Safety - Part 7: Combine harvesters, 11 ISO 4254-7:2017 forage harvesters, cotton harvesters and sugar cane harvesters Representation of results of particle size analysis - Part 4: 12 ISO 9276-4:2001/Amd 1:2017 Characterization of a classification process - Amendment 1: Additional explanations and minor corrections Petroleum and related products - Precision of measurement 13 ISO 4259-1:2017 methods and results - Part 1: Determination of precision data in relation to methods of test Petroleum and related products - Precision of measurement 14 ISO 4259-2:2017 methods and results - Part 2: Interpretation and application of precision data in relation to methods of test Woodworking machines - Safety requirements - Part 3: 15 ISO 19085-3:2017 Numerically controlled (NC) boring and routing machines Woodworking machines - Safety - Part 6: Single spindle vertical 16 ISO 19085-6:2017 moulding machines ("toupies") Welding - Measurement of preheating temperature, interpass 17 ISO 13916:2017 temperature and preheat maintenance temperature Information and documentation - Trusted third party repository 18 ISO 17068:2017 for digital records Information and documentation - Records management 19 ISO 23081-1:2017 processes - Metadata for records - Part 1: Principles Gas cylinders - 17E and 25E taper threads for connection of 20 ISO 11363-2:2017 valves to gas cylinders - Part 2: Inspection gauges Financial services - Personal Identification Number (PIN) 21 ISO 9564-1:2017 management and security - Part 1: Basic principles and requirements for PINs in card-based systems Anodizing of aluminium and its alloys - Assessment of quality of 22 ISO 3210:2017 sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) 23 ISO 3874:2017 Series 1 freight containers - Handling and securing Thermal spraying - Determination of the deposition efficiency for 24 ISO 17836:2017 thermal spraying Condition monitoring and diagnostics of wind turbines - Part 1: 25 ISO 16079-1:2017 General guidelines 26 ISO 9123:2017 Hydrometry - Stage-fall-discharge relationships Plain bearings - Pressed bimetallic half thrust washers - Features 27 ISO 6526:2017 and tolerances Pneumatic fluid power - Compressed air filters - Part 1: Main 28 ISO 5782-1:2017 characteristics to be included in supplier's literature and product- marking requirements Classification and information on design and applications of 29 ISO 11295:2017 plastics piping systems used for renovation and replacement Optics and photonics - Camera lenses - Measurement of ISO 30 ISO 8478:2017 spectral transmittance Ophthalmic optics - Spectacle lenses - Fundamental 31 ISO 14889:2013/Amd 1:2017 requirements for uncut finished lenses - Amendment 1 Geotechnical investigation and testing - Geotechnical monitoring 32 ISO 18674-3:2017 by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers Electronic fee collection - Evaluation of equipment for conformity 33 ISO 16407-1:2017 to ISO 17575-1 - Part 1: Test suite structure and test purposes Medical laboratories - Requirements for collection, transport, 34 ISO/TS 20658:2017 receipt, and handling of samples Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: 35 ISO 14253-1:2017 Decision rules for verifying conformity or nonconformity with specifications Health informatics - Re-usable component strategy for use case 36 ISO/TR 19669:2017 development Physical and mechanical properties of wood - Test methods for 37 ISO 13061-10:2017 small clear wood specimens - Part 10: Determination of impact bending strength Information technology - Object Management Group Unified 38 ISO/IEC 19513:2017 Profile for DoDAF and MODAF (UPDM), 2.1.1 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-3:2017/Amd networks - Specific requirements - Part 3: Standard for Ethernet - 39 1:2017 Amendment 1: Physical layer specifications and management parameters for 100 Mb/s operation over a single balanced twisted pair cable (100BASE-T1) Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-1Q:2016/Cor 40 networks - Specific requirements - Part 1Q: Bridges and bridged 1:2017 networks - Technical Corrigendum 1: Technical and editorial corrections Information technology - Telecommunications and information exchange between systems - Local and metropolitan area 41 ISO/IEC/IEEE 8802-15-3:2017 networks - Specific requirements - Part 15-3: High data rate wireless multi-media networks Information technology - Telecommunications and information exchange between systems - Local and metropolitan area 42 ISO/IEC/IEEE 8802-15-6:2017 networks - Specific requirements - Part 15-6: Wireless body area network ISO/IEC 18033-2:2006/Amd Information technology - Security techniques - Encryption 43 1:2017 algorithms - Part 2: Asymmetric ciphers - Amendment 1: FACE Information technology - High efficiency coding and media ISO/IEC 23008-5:2017/Amd delivery in heterogeneous environments - Part 5: Reference 44 1:2017 software for high efficiency video coding - Amendment 1: Reference software for screen content coding extensions 45 ISO 76:2006/Amd 1:2017 Rolling bearings - Static load ratings - Amendment 1 Solid mineral fuels - Guidelines for the validation of alternative 46 ISO 11726:2017 methods of analysis Earth-mover tyres and rims - Part 1: Tyre designation and 47 ISO 4250-1:2017 dimensions Paints and varnishes - Determination of resistance to liquids - 48 ISO 2812-1:2017 Part 1: Immersion in liquids other than water Paints and varnishes - Determination of resistance to liquids - 49 ISO 2812-4:2017 Part 4: Spotting methods Preparation of steel substrates before application of paints and 50 ISO 11126-10:2017 related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet Machine tools - Environmental evaluation of machine tools - Part 51 ISO 14955-1:2017 1: Design methodology for energy-efficient machine tools Rubber, vulcanized or thermoplastic - Determination of tensile 52 ISO 37:2017 stress-strain properties Information and documentation - Data exchange protocol for 53 ISO 20614:2017 interoperability and preservation Buildings and civil engineering works - Vocabulary - Part 1: 54 ISO 6707-1:2017 General terms Buildings and civil engineering works - Vocabulary - Part 2: 55 ISO 6707-2:2017 Contract and communication terms Plastics - Injection moulding of test specimens of thermoplastic 56 ISO 294-5:2017 materials - Part 5: Preparation of standard specimens for investigating anisotropy Petroleum, petrochemical and natural gas industries - Guidelines 57 ISO/TS 17969:2017 on competency management for well operations personnel 58 ISO 20038:2017 Banking and related financial services - Key wrap using AES Packaging - Bar code and two-dimensional symbols for shipping, 59 ISO 15394:2017 transport and receiving labels Graphical symbols - Safety signs - Safety way guidance systems 60 ISO 16069:2017 (SWGS) Ergonomics of human-system interaction - Part 940: Evaluation 61 ISO 9241-940:2017 of tactile and haptic interactions Safety of machinery - Minimum gaps to avoid crushing of parts 62 ISO 13854:2017 of the human body Electronic fee collection - Evaluation of equipment for conformity 63 ISO 16410-1:2017 to ISO 17575-3 - Part 1: Test suite structure and test purposes Addressing - Part 4: International postal address components 64 ISO 19160-4:2017 and template language Information technology - Telecommunications and information 65 ISO/IEC 22425:2017 exchange between systems - NFC-SEC Test Methods 66 ISO/IEC 21778:2017 Information technology - The JSON data interchange syntax Information technology - Security techniques - Key management 67 ISO/IEC 11770-4:2017 - Part 4: Mechanisms based on weak secrets Information technology - High efficiency coding and media ISO/IEC 23008-11:2015/Cor 68 delivery in heterogeneous environments - Part 11: MPEG media 1:2017 transport composition information - Technical Corrigendum 1 Information technology - Conformance testing for the biometric 69 ISO/IEC 24709-1:2017 application programming interface (BioAPI) - Part 1: Methods and procedures 70 ISO 3887:2017 Steels - Determination of the depth of decarburization Tractors and machinery for agriculture and forestry - Speed 71 ISO 20383:2017 Identification Sign (SIS) Liquid hydrocarbons - Volumetric measurement by turbine 72 ISO 2715:2017 flowmeter 73 ISO 2292:2017 Cocoa beans - Sampling 74 ISO 2451:2017 Cocoa beans - Specification and quality requirements Paints and varnishes - Corrosion protection of steel structures by 75 ISO 12944-1:2017 protective paint systems - Part 1: General introduction

Paints and varnishes - Corrosion protection of steel structures by 76 ISO 12944-2:2017 protective paint systems - Part 2: Classification of environments

Paints and varnishes - Corrosion protection of steel structures by 77 ISO 12944-3:2017 protective paint systems - Part 3: Design considerations Paints and varnishes - Corrosion protection of steel structures by 78 ISO 12944-4:2017 protective paint systems - Part 4: Types of surface and surface preparation Paints and varnishes - Corrosion protection of steel structures by 79 ISO 12944-7:2017 protective paint systems - Part 7: Execution and supervision of paint work Paints and varnishes - Corrosion protection of steel structures by 80 ISO 12944-8:2017 protective paint systems - Part 8: Development of specifications for new work and maintenance Cinematography - Manufacturer-printed, latent image 81 ISO 12222:2017 identification on 16 mm, 35 mm and 65 mm motion-picture film - Specifications and dimensions 82 ISO 21340:2017 Test methods for fibrous activated carbon Welding consumables - Technical delivery conditions for filler 83 ISO 544:2017 materials and fluxes - Type of product, dimensions, tolerances and markings Styrene-butadiene rubber, raw - Determination of soap and 84 ISO 7781:2017 organic-acid content Plastics - Epoxy resins - Determination of degree of crosslinking 85 ISO 20368:2017 of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy Petroleum and natural gas industries - Specific requirements for 86 ISO 19901-2:2017 offshore structures - Part 2: Seismic design procedures and criteria Containers and accessories for pharmaceutical preparations - 87 ISO 11418-2:2016/Amd 1:2017 Part 2: Screw-neck glass bottles for syrups - Amendment 1 Containers and accessories for pharmaceutical preparations - 88 ISO 11418-3:2016/Amd 1:2017 Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms - Amendment 1 Anodizing of aluminium and its alloys - Specification for hard 89 ISO 10074:2017 anodic oxidation coatings on aluminium and its alloys Public swimming pools - Computer vision systems for the 90 ISO 20380:2017 detection of drowning accidents in swimming pools - Safety requirements and test methods Intravascular catheters - Sterile and single-use catheters - Part 91 ISO 10555-1:2013/Amd 1:2017 1: General requirements - Amendment 1 Refrigerants - Designation and safety classification - Amendment 92 ISO 817:2014/Amd 1:2017 1 Intelligent transport systems - Spatio-temporal data dictionary 93 ISO/TR 21718:2017 for cooperative ITS and automated driving systems Information technology - Generic cabling for customer premises - 94 ISO/IEC 11801-1:2017 Part 1: General requirements Information technology - Generic cabling for customer premises - 95 ISO/IEC 11801-2:2017 Part 2: Office premises Information technology - Generic cabling for customer premises - 96 ISO/IEC 11801-3:2017 Part 3: Industrial premises Information technology - Generic cabling for customer premises - 97 ISO/IEC 11801-4:2017 Part 4: Single-tenant homes Information technology - Generic cabling for customer premises - 98 ISO/IEC 11801-5:2017 Part 5: Data centres Information technology - Generic cabling for customer premises - 99 ISO/IEC 11801-6:2017 Part 6: Distributed building services Information technology - Conformance test methods for security 100 ISO/IEC 19823-10:2017 service crypto suites - Part 10: Crypto suite AES-128 Information technology - Continual performance improvement of 101 ISO/IEC TR 22446:2017 IT enabled services Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous 102 ISO 9364:2017 hot-dip process, of commercial, drawing and structural qualities

Steel sheet, zinc-5 % aluminium alloy-coated by the continuous 103 ISO 14788:2017 hot-dip process, of commercial, drawing and structural qualities Hot-rolled steel sheet in coils of higher yield strength with 104 ISO 20805:2017 improved formability and heavy thickness for cold forming Fire detection and alarm systems - Part 2: Fire detection control 105 ISO 7240-2:2017 and indicating equipment Fire detection and alarm systems - Part 4: Power supply 106 ISO 7240-4:2017 equipment 107 ISO 8201:2017 Acoustics - Audible and other emergency evacuation signals Liquid hydrocarbons - Volumetric measurement by displacement 108 ISO 2714:2017 meter Definitions of some terms used in the tyre industry - Part 1: 109 ISO 4223-1:2017 Pneumatic tyres Tyre stiffness index testing procedure for passenger car 110 ISO 19940:2017 extended mobility and run flat tyres Computer applications in terminology - Terminological markup 111 ISO 16642:2017 framework Synchronous belt drives - Metric pitch - Tooth profiles T and AT 112 ISO 17396:2017 endless and open ended belts and pulleys Gas welding equipment - Acetylene manifold systems for 113 ISO 14114:2017 welding, cutting and allied processes - General requirements Natural rubber latex concentrate - Centrifuged or creamed, 114 ISO 2004:2017 ammonia-preserved types - Specifications Essential oil of thyme [Thymus vulgaris L. and Thymus zygis L.], 115 ISO 19817:2017 thymol type Calculation of load capacity of spur and helical gears - Part 30: 116 ISO/TR 6336-30:2017 Calculation examples for the application of ISO 6336 parts 1,2,3,5 Reciprocating internal combustion engines - Vocabulary - Part 1: 117 ISO 2710-1:2017 Terms for engine design and operation Cross-country skis - Determination of mass and location of 118 ISO 7138:2017 balance point Fire-resistance tests - Guidance on the application and extension of results from tests conducted on fire containment assemblies 119 ISO/TR 12470-1:2017 and products - Part 1: Loadbearing elements and vertical and horizontal separating elements Fire-resistance tests - Guidance on the application and extension 120 ISO/TR 12470-2:2017 of results from tests conducted on fire containment assemblies and products - Part 2: Non-loadbearing elements Metallic and other inorganic coatings - Requirements for the 121 ISO 27830:2017 designation of metallic and inorganic coatings Hydrometry - Measurement in meandering river and in streams 122 ISO/TR 9210:2017 with unstable boundaries 123 ISO 16253:2017 Watch-cases and accessories - Vapour phase deposited coatings Hand-held non-electric power tools - Safety requirements - Part 124 ISO 11148-13:2017 13: Fastener driving tools Bidis - Determination of total and nicotine-free dry particulate 125 ISO 17175:2017 matter using a linear routine analytical smoking machine Earth-moving machinery - Object detection systems and visibility 126 ISO 16001:2017 aids - Performance requirements and tests Workplace exposure - Assessment of dermal exposure to nano- 127 ISO/TS 21623:2017 objects and their aggregates and agglomerates (NOAA) Cardiovascular implants and extracorporeal systems - Vascular 128 ISO/TR 12417-2:2017 device-drug combination products - Part 2: Local regulatory information Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product 129 ISO/TS 19930:2017 that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 Intelligent transport systems - Use of nomadic and portable devices to support ITS service and multimedia provision in 130 ISO/TR 10992-2:2017 vehicles - Part 2: Definition and use cases for mobile service convergence Resilient floor coverings - Heterogeneous poly(vinyl chloride) 131 ISO 10582:2017 floor covering - Specifications Conformity assessment - Requirements for accreditation bodies 132 ISO/IEC 17011:2017 accrediting conformity assessment bodies General requirements for the competence of testing and 133 ISO/IEC 17025:2017 calibration laboratories Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-3:2017/Amd 134 networks - Specific requirements - Part 3: Standard for Ethernet - 2:2017 Amendment 2: Media access control parameters, physical layers, and management parameters for 25 Gb/s operation Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-3:2017/Amd networks - Specific requirements - Part 3: Standard for Ethernet - 135 3:2017 Amendment 3: Physical layers and management parameters for 25 Gb/s and 40 Gb/s operation, types 25GBASE-T and 40GBASE- T Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-3:2017/Amd networks - Specific requirements - Part 3: Standard for Ethernet - 136 4:2017 Amendment 4: Physical layer specifications and management parameters for 1 Gb/s operation over a single twisted-pair copper cable Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-3:2017/Amd 137 networks - Specific requirements - Part 3: Standard for Ethernet - 5:2017 Amendment 5: Specification and management parameters for interspersing express traffic Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-3:2017/Amd networks - Specific requirements - Part 3: Standard for Ethernet - 138 7:2017 Amendment 7: Media access control parameters, physical layers, and management parameters for 2.5 Gb/s and 5 Gb/s operation, types 2.5GBASE-T and 5GBASE-T

Information technology - Telecommunications and information ISO/IEC/IEEE 8802-1Q:2016/Amd exchange between systems - Local and metropolitan area 139 4:2017 networks - Specific requirements - Part 1Q: Bridges and bridged networks - Amendment 4: Frame preemption Information technology - Telecommunications and information exchange between systems - Local and metropolitan area ISO/IEC/IEEE 8802-1Q:2016/Amd 140 networks - Specific requirements - Part 1Q: Bridges and bridged 5:2017 networks - Amendment 5: Enhancements to bridging of IEEE 802.11 media Systems and software engineering - Software life cycle 141 ISO/IEC/IEEE 12207:2017 processes Identification cards - Integrated circuit cards - Part 11: Personal 142 ISO/IEC 7816-11:2017 verification through biometric methods 143 ISO/IEC 14882:2017 Programming languages - C++ Information technology - Home electronic system (HES) 144 ISO/IEC 10192-3:2017 interfaces - Part 3: Modular communications interface for energy management Information technology - Fibre channel - Part 151: Fibre Channel 145 ISO/IEC 14165-151:2017 BaseT (FC-BaseT) Information technology - Security techniques - Key management ISO/IEC 11770-3:2015/Amd 146 - Part 3: Mechanisms using asymmetric techniques - 1:2017 Amendment 1: Blinded Diffie-Hellman key agreement Information technology - Multimedia application format (MPEG- 147 ISO/IEC 23000-13:2017 A) - Part 13: Augmented reality application format Information technology - Cloud computing - Interoperability and 148 ISO/IEC 19941:2017 portability 149 ISO 16228:2017 Fasteners - Types of inspection documents Air cargo - Double stud tie-down fittings - Design and testing 150 ISO 9788:2017 requirements Space systems - Guidelines for the management of systems 151 ISO 18676:2017 engineering Road Vehicles - Extended vehicle (ExVe) methodology - Part 1: 152 ISO 20077-1:2017 General information Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage 153 ISO 29061-3:2017 systems - Part 3: Installation of child restraint systems using vehicle seat belts Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage 154 ISO 29061-4:2017 systems - Part 4: Securing of child in child restraint system and daily handling aspects Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage 155 ISO 29061-5:2017 systems - Part 5: Installation and securing of child in a booster system Garden equipment - Safety requirements for combustion-engine- 156 ISO 5395-3:2013/Amd 2:2017 powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards 157 ISO 18787:2017 Foodstuffs - Determination of water activity Paints and varnishes - Determination of resistance to humidity - 158 ISO 6270-2:2017 Part 2: Condensation (in-cabinet exposure with heated water reservoir) 159 ISO 21720:2017 XLIFF (XML Localisation interchange file format) Woodworking machines - Safety - Part 8: Belt sanding and 160 ISO 19085-8:2017 calibrating machines for straight workpieces Welding consumables - Tubular cored electrodes and rods for 161 ISO 17633:2017 gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification 162 ISO 13918:2017 Welding - Studs and ceramic ferrules for arc stud welding Rubber hoses and hose assemblies for aircraft ground fuelling 163 ISO 1825:2017 and defuelling - Specification Gas cylinders - Cylinder valve outlets for gases and gas mixtures 164 ISO 5145:2017 - Selection and dimensioning 165 ISO/TR 10093:2017 Plastics - Fire tests - Standard ignition sources Adhesives - Wood-to-wood adhesive bonds - Determination of 166 ISO 6237:2017 shear strength by tensile loading 167 ISO 2797:2017 Textile glass - Rovings - Basis for a specification Reinforcement products - Woven fabrics - Determination of 168 ISO 5025:2017 width and length Spinning preparatory, spinning and doubling (twisting) 169 ISO 368:2017 machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 Pen systems - Part 2: Plunger stoppers for pen-injectors for 170 ISO 13926-2:2017 medical use Protective equipment for martial arts - Part 1: General 171 ISO 21924-1:2017 requirements and test methods Protective equipment for martial arts - Part 2: Additional 172 ISO 21924-2:2017 requirements and test methods for instep protectors, shin protectors and forearm protectors Protective equipment for martial arts - Part 3: Additional 173 ISO 21924-3:2017 requirements and test methods for trunk protectors Protective equipment for martial arts - Part 4: Additional 174 ISO 21924-4:2017 requirements and test methods for head protectors Protective equipment for martial arts - Part 5: Additional 175 ISO 21924-5:2017 requirements and test methods for genital protectors and abdominal protectors Protective equipment for martial arts - Part 6: Additional 176 ISO 21924-6:2017 requirements and test methods for breast protectors for females

Protective equipment for martial arts - Part 7: Additional 177 ISO 21924-7:2017 requirements and test methods for hand and foot protectors Respiratory protective devices - Methods of test and test 178 ISO 16900-2:2017 equipment - Part 2: Determination of breathing resistance Cranes - Wire ropes - Care and maintenance, inspection and 179 ISO 4309:2017 discard Mechanical vibration and shock - Characterization of the dynamic 180 ISO 18437-6:2017 mechanical properties of visco-elastic materials - Part 6: Time- temperature superposition 181 ISO 19809:2017 Packaging - Accessible design - Information and marking Cigarettes - Determination of benzo[a]pyrene in cigarette 182 ISO 22634-1:2017 mainstream smoke using GC/MS - Part 1: Method using methanol as extraction solvent Cigarettes - Determination of benzo[a]pyrene in cigarette 183 ISO 22634-2:2017 mainstream smoke using GC/MS - Part 2: Method using cyclohexane as extraction solvent 184 ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement Plastics pipes and fittings - Butt fusion jointing procedures for 185 ISO 21307:2017 polyethylene (PE) piping systems Extracorporeal systems for blood purification - Part 1: 186 ISO 8637-1:2017 Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators 187 ISO 13912:2017 Structural timber - Machine strength grading - Basic principles Ophthalmic optics - Visual acuity testing - Standard and clinical 188 ISO 8596:2017 optotypes and their presentation Ophthalmic optics - Contact lenses and contact lens care 189 ISO 11981:2017 products - Determination of physical compatibility of contact lens care products with contact lenses Ophthalmic optics - Contact lenses and contact lens care 190 ISO 11986:2017 products - Determination of preservative uptake and release Quality management - Guidelines for quality management in 191 ISO 10006:2017 projects Microbeam analysis - Analytical electron microscopy - Method for 192 ISO 20263:2017 the determination of interface position in the cross-sectional image of the layered materials Intelligent transport systems (ITS) - Guidance protocol via 193 ISO 13184-3:2017 personal ITS station for advisory safety systems - Part 3: Road guidance protocol (RGP) conformance test specification Intelligent transport systems - Reference model architecture(s) 194 ISO 14813-6:2017 for the ITS sector - Part 6: Use of ASN.1 195 ISO/TS 18864:2017 Health informatics - Quality metrics for detailed clinical models