Cleanflex ST TYVEK® / HDPE STERILIZABLE BAGS

► CLEAN ROOM PACKAGING BY B+K

® CleanFlex ST TYVEK® / HDPE STERILIZABLE BAGS

This packaging is ready-to-use for the customer due to the full Tyvek® front and the rear from HDPE film, which enables sterilization without contamination risk. A standard printing including an indicator dot shows successful treatment during sterilization.

® CleanFlex ST – STANDARD PROGRAM code external sizes (W x L) internal sizes qty / full pal. qty / box STTH20 200 x 350 mm – 8” x 14” 180 x 300 mm 10.010 pcs 500 pcs

STTH32 320 x 450 mm – 13” x 18” 300 x 400 mm 4.010 pcs 200 pcs

STTH40 400 x 550 mm – 16” x 22” 380 x 500 mm 4.010 pcs 200 pcs

STTH50 500 x 650 mm – 20” x 26” 480 x 600 mm 4.010 pcs 200 pcs

STTH100 1000 x 1230 mm – 40” x 48” 980 x 1200 mm 1.010 pcs 1.010 pcs

MATERIALS USED > Uncoated Tyvek® – 75 g/m² > 100 % HDPE film – 80 µm

STANDARD PRINTING > ‘CleanFlex®’ and full description > For STTH100: > B+K code number > Just indicator dot printing > B+K lot number for full traceability > Indicator dot for steam sterilization (pink/brown)

STANDARD PACKING > 100 bags in 2 protection bags > For STTH100: > Inner bag labelled for traceability > 20 bags in 2 protection bags > Bundles in small cardboard boxes > Inner bag labelled > Units per pallet mentioned above > Bundles in pallet-sized box > 10 customer samples per pallet > 10 samples per pallet

Marketing Datasheet STTH – rev 1 – 2008-03 CleanFlex® is a registered trademark of Bischof + Klein GmbH & Co. KG Tyvek® is a registered trade mark of DuPont Co.

www.bk-packaging.com

Bischof + Klein GmbH & Co. KG · Rahestraße 47 · D - 49525 Lengerich Tel. +49 (0) 54 81 / 9 20 - 0 · [email protected]

► CLEAN ROOM PACKAGING BY B+K

® CleanFlex ST TYVEK® / HDPE STERILIZABLE BAGS

BULK MATERIALS > Plastic and rubber stoppers > Closures > Caps and seals > Injection-systems > Dosing pumps > Atomizers > Syringes > Processing tools

CLEAN ROOM PRODUCTION > Extrusion of HDPE in class 5, DIN EN ISO 14644-1 > Printing on Tyvek® in class 5, DIN EN ISO 14644-1 > Conversion of bag in class 5, DIN EN ISO 14644-1 > Particle and biological monitoring in place

STERILIZATION OPTIONS > Steam sterilization up to 125 °C / 15 – 20 min. > Ethylene Oxide gazing > Plasma-Sterilization > Gamma-irradiation

CERTIFICATION AND QUALITY ASSURANCE > IR-spectrum of HDPE > Dimensions and thickness > Seal strength > Particle class 200 as per IEST-STD-CC 1246D

TAILOR-MADE DIVERSIFICATION > Customised printing > Other indicator labels and prints for other sterilization options > Full Tyvek® packaging material is also possible

www.bk-packaging.com

Bischof + Klein GmbH & Co. KG · Rahestraße 47 · D - 49525 Lengerich Tel. +49 (0) 54 81 / 9 20 - 0 · [email protected]