Indicators and Meters
TM
Auto Pump
Inverter Chargers
Battery Chargers
PRODUCT CATALOG AutoAuto E Ejectsjects
The Most Trusted Name in Rugged Electronic Power Products For Over 50 Years
Issue 123 Dash Mount Accessories Table of Contents
Kussmaul Electronics Milestones 1) Battery Charging 2 - 25 A. Battery Chargers B. Battery Savers
2) Battery Indicators / Meters 26 - 31 1967, was the year Ernest A. A. Digital Displays C. Analog and LED Displays (Ernie) Kussmaul B. Bar Graph Displays D. Electrical & Temp. Displays founded Kussmaul Electronics. 3) Ejection Units 32 - 41 A solution oriented company A. Electrical C. Covers and Nameplates that eventually became the B. Air D. Wiring Accessories standard for power products in the Emergency Vehicle Market. 4) Air Compressors 42 - 47 1980-1990’s A. Pump Accessories C. 120 Volt AC In 1985, the first Auto and Air T In 1975, the first Kussmaul B. 12 Volt DC D. 120 Volt AC HP Eject was introduced. able Battery Charger is born. 5) Kits And Packages 48 - 57 The 1990’s, the first Automatic A. Pump Plus Chargers
Load Shedding System was B. Kits and Packages designed. of 6) Solar Power Charging 58 - 59
A. Standard Systems C
1990’s-2015 on t en s In the 2000’s, the 30 Amp 7) 120/240 VAC Equipment 60 - 65 Auto Eject was introduced. A. Power Distribution Panels C. Inverter - Chargers B. Power Transfer Switches D. Inverters The first decade of 2000, brought the Digital Status 8) DC Power Management 66 - 79 Center. A. Mobile DC UPS C. Relays 2015-present B. Load Management D. PDS - 100
Growth continues in 2015, the first 9) Installation Accessories 80 - 84 Battery Chargers with patented A. Mounting Plates D. Wire Feed Thru Fittings Parasitic Load Compensation (PLC) B. Circuit Protection E. Bus Bars are developed. Dashboard Acces- C. Junction Boxes F. Terminal Strips sories, Solar Panels expanded the line and Super Auto Eject Deluxe 10) Engine/Vehicle Accessories 85 - 93 Covers were introduced in 2018. A. Cord Reels E. Auto Throttle 1 B. R.F. Control F. Open Door Alarms brings more PLC technology 2019, C. Safety Locks G. USB & Ethernet Ports to the new generation of Low D. Radio Charging H. Touch Switch & Bluetooth Profile Battery Chargers and developments in Inverter Charging. 11) Index Sorted By Description 94 - 96 1 TM 800-346-0857 • email: [email protected] www.kussmaul.com 170 Cherry Ave., West Sayville, NY 11796 • Ph: 631-567-0314 • Fax: 631-567-5826 • www. kussmaul.com Section 1 Charger Selection Guide
SINGLE BATTERY BANK SYSTEMS SELECTION CHART DDEC Systems Battery Chargers SINGLE BATTERY BANK SYSTEMS
Charger Low Profile Charger EV Charger B
Selection Guide Series Series attery Not Recommended Main Battery Pages 3 - 4 Pages 5 - 7 Page 8 Average Battery Ratings
S OK CCA: 700
Amp Hour: 100 C ection Recommended Engine Battery hargers Auto Charge Auto Charge Auto Charge PARASITIC LOADS IN AMPS 0 5 10 0 5 10 0 5 10 0 5 10 20 0 5 10 12 Series 1000 PLC 20/20 CHARGER SERIES AMPS PAGE Page 9 Page 10 Page 11 AUTO CHARGE AUTO CHARGE 12 12 9 1 - B AUTO CHARGE 12HO 20 9 Auto Charge Auto Charge Auto Charge AUTO CHARGE 1200 40 13 1200 1200 35/10 Built-In Display Remote Display LOW PROFILE Page 14 Page 12 Page 13 LPC 7 7 5 attery LPC 20 20 6 LPC 40 40 6 Auto Charge Auto Charge Maintenance LPC 80 80 7 40/20 1 Master Page 15 Page 16 Page 16 EV
C EV-20 20 8 EV-40 40 8 harger s AUTO CHARGE / BATTERY SAVER Auto Charge Auto Charge Auto Charge AUTO CHARGE 1000 PLC 18 10 11 Series 2000 PLC 4000 Page 17 Page 18 Page 19 AUTO CHARGE 20/20 40 11 AUTO CHARGE 35/10 45 14 AUTO CHARGE 40/20 60 15 AUTO CHARGE D 33 20 Auto Charge Auto Charge LPC D & D2 20 45 WATERPROOF Page 20 Page 21 Page 22 WP-35 35 24 PUMP PLUS PUMP PLUS 1000 PLC 18 49 Euro Charger Waterproof Charger Battery Saver PUMP PLUS 1200 40 50 Series WP 600 Low Ripple Series AC D PUMP PLUS 33 53 Page 23 Page 24 Page 25 These chargers are for average recharge rates and average sized batteries. For specific applications, please contact our sales or engineering department with battery size, parasitic loads and required recharge time. 2 3 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Charger Selection Guide Low Profile Charger 7 - Single Battery Bank
Charge Single Battery Bank DUAL BATTERY BANK SYSTEMS SELECTION CHART Power Sensitive Electronics DDEC Systems Low Profile Case Fits in Tight Locations DUAL BATTERY BANK SYSTEMS
B Features B attery attery • 7A for charging a single battery bank • Three step charging: bulk, absorption, and float • Lightweight, small low profile size
C • Clean output poses no interference with radios and C other mobile devices hargers hargers
Not Recommended Average Main Battery OK Battery Ratings CCA: 700 Recommended Amp Hour: 100 Engine Battery
PARASITIC LOADS IN AMPS 0 5 10 0 5 10 0 5 10 0 5 10 BATTERY CHARGER AMPS PAGE SERIES AUTO CHARGE AUTO CHARGE 11 10 17 AUTO CHARGE 11HO 20 17 AUTO CHARGE / BATTERY SAVER AUTO CHARGE 2000 PLC 18 18 AUTO CHARGE 4000 45 19 AUTO CHARGE D2 33 20 • Gel Cell/Lead-Acid switch selects the optimum charge/float voltages based on the battery type • Included Charger Status indicator light changes color according to the output EURO • Current limiting prevents damage from an overload EURO II 12 23 • Load activated cooling fan allows for continuous operation at full-rated output • A Float/3 Step selector switch protects the batteries when charging under a continuous load EURO II VHO 40 23 • Meets CE requirements PUMP PLUS • Includes a heavy duty stainless steel case designed for emergency vehicle use PUMP PLUS HO 11 52 PUMP PLUS 2000 PLC 18 51
These chargers are for average recharge rates and average sized batteries. For specific applications, please contact our sales or engineering department with battery size, parasitic loads and required recharge time.
Electrical Data Dimensions Part Number Description DC DC AC AC Wt. L W H Volts Amps Volts Amps 445-4290-5 LPC 7 12 7 120 / 240 2.0 / 1.0 8.62” 4.93” 2.47” 3 4 5 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Low Profile Charger 40 with PLC - Single Battery Bank Low Profile Charger 20 & 80 - Single Battery Bank
Charge Single Battery Bank with Parasitic Load Charge Single Battery Bank for Power Sensitive POWER Compensation (PLC) for Power Sensitive Electronics Electronics Low Profile Case Fits in Tight Locations 80
0 80AMPS Low Profile Case Fits in Tight Locations Features • 20A and 80A for charging a single battery bank LPC 20 LPC 80 LPC 40 NEW LPC 40,PLC Features • Clean output poses no interference with radios and other
B • Newly enhanced LPC 40A with patented PLC mobile electronics B
attery (parasitic load compensation) technology • Includes a 15A auxiliary output circuit with power source attery • Clean output poses no interference with radios selector switch for operating accessory loads i.e., air and other mobile electronics compressor pumps, hand lights or handheld radios • Includes a 15A auxiliary output circuit with a • Front panel connections for remote display and auxiliary loads C power source selector switch for operating C accessory loads i.e., air compressor pumps, • Includes a heavy duty aluminum case designed for hargers handheld lights or handheld radios emergency vehicle use hargers • Front panel connections for remote display and auxiliary loads Remote Display Options • Includes a heavy duty aluminum case designed for emergency vehicle use • User Selectable: • Battery Type • 3 Step or Float • 1, 5 or 10 hour timer • PLC LPC 80
Remote Display Options Bar Graph Display 091-200-IND Super Auto Eject Optional Accessory Deluxe Covers Available for this product E-Z Slide Mount Plate: see page 40 091-200-EZM For slide-in installation and removal of the LPC 40 or LPC 20 in hard to access Bar Graph Display Status Center Display areas with minimal vertical 091-200-IND in Watertight Case clearance For LPC 40: 091-194-IND-WT-XX Super Auto Eject Deluxe Covers Available Status Center Display in Watertight Case Color Options for this product see page 40 Status Center Display LPC 20: 091-194B-IND LPC-80: 091-194C-IND-WT-XX YW RD BL LPC 20: 091-194B-IND LPC 80: 091-194C-IND Yellow Red Blue Color Options see p6 LPC 20 Status Center Display WH GY BLK For LPC 40: 091-194-IND White Gray Black Electrical Data Dimensions Part Number Description DC DC AC AC Wt. L W H Volts Amps Volts Amps Electrical Data Dimensions 091-206-12 LPC 80, w/ Bar Graph Display 12 80 120 13 13.75” 7.00” 4.09” 10 Part Number Description DC DC AC AC Wt. 091-206-12-194C LPC 80, w/ Status Center 12 80 120 13 13.75” 7.00” 4.09” 10 L W H Volts Amps Volts Amps 091-206-12-194C-WT-XX LPC 80, w/ Watertight Display 12 80 120 13 13.75” 7.00” 4.09” 10 091-200-12 LPC 40, w/ Bar Graph Display 12 40 120 6.0 13.25” 6.80” 3.30” 7 091-207-12 LPC 20, w/ Bar Graph Display 12 20 120 7.0 13.25” 6.80” 3.30” 7 091-200-12-194 LPC 40, w/ Status Center 12 40 120 6.0 13.25” 6.80” 3.30” 7 091-207-12-194B LPC 20 w/ Status Center 12 20 120 7.0 13.25” 6.80” 3.30” 7 091-200-12-194-WT-XX LPC 40, w/ Watertight Display 12 40 120 6.0 13.25” 6.80” 3.30” 7 091-207-12-194B-WT-XX LPC 20 w/ Watertight Display 12 20 120 7.0 13.25” 6.80” 3.30” 7 091-200-EZM EZ Slide Mount Plate for LPC N/A N/A N/A N/A N/A N/A N/A N/A 091-200-EZM EZ Slide Mount Plate for LPC N/A N/A N/A N/A N/A N/A N/A N/A 40 20 and LPC 40 (see page 6) All units also available in 240 VAC Input, contact the sales department for part number All units also available in 240 VAC Input, contact the sales department for part number 24 VDC version available, see Page 22 for details 6 7 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com EV Charger Series - Single Battery Bank Auto Charge® 12 Series - Single Battery Bank
Charge Single Battery Bank Charge Single Battery Bank Auxiliary Output for Electronics Provide Power for Onboard Electronics Low Profile Design Front Panel Amp Meter
EV 20 EV 40 12 12 HO
B Features Features B attery attery • 20 and 40A models available for charging • 12 and 20A models available for charging a single a single battery bank battery bank • Low profile design saves valuable space in • Automatic operation regulates the output to a single
C compartments and/or under the seat battery bank C • Clean output poses no interference with radios • Front panel amp meter indicates the output current hargers and other mobile electronics (Optional vehicle side mount indicator available) hargers • A 15A auxiliary output circuit with a power source • Includes a heavy duty aluminum case with a selector switch for operating accessory loads i.e., protective front panel and wire strain relief designed air compressor pumps, handheld lights or for emergency vehicle use handheld radios • Auto Charge 12 is UL recognized • Heavy duty terminal block for secure connections • Durable powder coat finish • Available as a kit with a remote battery meter • Includes a heavy duty aluminum case designed for emergency vehicle use • An optional mounting plate features slide-in and Optional Accessories Optional Configurations lock design for easy installation/removal under Remote Bar Graph Display: AC Outlet in Front Panel: seats and other hard to access locations 023-5353-1 15A GFI duplex outlet with • Charger “On” LED circuit breaker protection EV-20 Features • Bar graph battery condition provides plug-in point for AC • 20A rating with a clean output - no • Operates when charger is accessories (PIM option) electronic interference not powered • 2 step charging: bulk,float, no overcharging • Operates on 120V Model Shown is UL Recognized: Auto Charge 12 • Lowest profile design, only 2.32” high Remote Display Options EV-40 Features • Fast 3 step charging: Produces up to 40A output to quickly replenish batteries, then switches to Dual Voltage Input: lower float voltage maintenance mode to Selector switch on front avoid overcharging panel for 120 or 240V, • Includes a battery type selector switch to 50-60 hz input (DV) program use with Gel Cell/Flooded Lead Acid/ Slide-in Mounting Kick Plate: 444-5280-0 AGM batteries Plate Assembly: 444-5279-0 Protects front panel connections • Operates on 90-250V input, auto range Easy installation under seats Bar Graph Display LED Display and hard to access locations Model 12: 091-165-016 Model 12: 091-11-102-12 Model 12HO: 091-199-001 Electrical Data Dimensions Part Number Description Wgt. DC Volts DC Amps AC Volts AC Amps L W H Electrical Data Dimensions Part Number Description Wgt. 445-5393-0 EV-20, Charger 12 20 120/240 3.1 13.12" 6.80" 2.32" 5 DC Volts DC Amps AC Volts AC Amps L W H 445-5399-0 EV-20, Charger & Display 12 20 120/240 3.1 13.12" 6.80" 2.32" 5 091-165-12 Auto Charge 12 12 12 120 2.5 4.50" 5.50" 11.00" 12 445-5262-0 EV-40, Charger 12 40 120/240 6.2 13.12" 6.80" 3.13" 7 091-165-12-DV Auto Charge 12 DV 12 12 120/240 2.5/1.3 4.50" 5.50" 11.00" 12 445-5265-0 EV-40, Charger & Single Display 12 40 120/240 6.2 13.12” 6.80" 3.13” 8 091-170-12 Auto Charge 12 HO 12 20 120 4.7 4.25" 6.75" 12.75" 16 445-5264-0 EV-40, Charger & Dual Display 12 40 120/240 6.2 13.12” 6.80" 3.13” 9 091-170-DV-12 Auto Charge 12 HO-DV 12 20 120/240 4.7/2.3 4.25" 6.75" 12.75" 16 444-5279-0 Mounting Plate -- EV20/40 N/A N/A N/A N/A N/A N/A N/A N/A 091-170-PIM Auto Charge 12 HO-PIM 12 20 120 4.7 4.25" 6.75" 12.75" 16 444-5280-0 Kick Plate Guard -- EV20/40 N/A N/A N/A N/A N/A N/A N/A N/A 091-12PIM Auto Charge 12 PIM 12 12 120 2.5 4.25" 6.75" 12.75" 12 8 9 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Auto Charge® 1000 PLC - Single Battery Bank Auto Charge® 20/20 - Single Battery Bank
Charge Single Battery Bank at 15 Amps Charge Single Battery Bank at 20 Amps Power Auxiliary Loads with 3 Amp Battery Saver Power Auxiliary Loads with 20 Amp Battery Saver Remote Display Included Front Panel Amp Meters
B Features Features B attery attery • 15A battery charger with a 3A battery saver • 20A battery charger with a 20A battery saver • Microprocessor controlled, completely automatic • Automatic operation regulates output to a operation regulates the output to a single single battery bank battery bank
C • Separate 20A ATC fuse protected Battery C • Precision voltage controller senses the battery Saver output eliminates any drain on the hargers voltage, eliminating the need for sense wires hargers vehicle battery when in the station • Programmable Parasitic Load Compensation −− Automatically disconnects auxiliary vehicle allows for the user to input the total accessory load on the vehicle (in amps). This allows the loads from battery when the charger is charger to shift the absorption stage set point energized and powers them from the so the battery voltage drops to the float voltage internal power supply when desired current is reached −− Clean output poses no interference with • Battery selection switch to select Gel Cell, Lead- radios and other mobile devices Acid, AGM or Odyssey −− 20A output with automatic overload • Float/3-Step Charge Mode Selection Switches current limit • Automatic current limit Remote Display Options • Dual cooling fans • Battery Saver On/Off switch is used to bypass • Reverse polarity protected the Battery Saver and apply all 18A to charge • AC input circuit breaker protection the battery • Includes a heavy duty aluminum case • Patent pending designed for emergency vehicle use Battery Saver Wiring Diagram Battery Saver Wiring Diagram
Bar Graph Display 091-199-001 Super Auto Eject Deluxe Covers Available for this product see page 40
Status Center Display Battery Saver Operation: When the battery charger is Battery Saver Operation: When the battery charger is 091-194B-IND Status Center Display in operating, the vehicle’s accessories are powered by the operating, the vehicle’s accessories are powered by the 12V battery saver circuit, internal to the charger. When Watertight Case 12V battery saver circuit, internal to the charger. When the charger is powered off, a relay inside the charger 091-194B-IND-WT-XX the Charger is powered off, a relay inside the charger switches the vehicle accessories directly to the battery. Color Options see page 6 switches the vehicle accessories directly to the battery.
Electrical Data Dimensions Part Number Description DC DC AC AC Wt. L W H Volts Amps Volts Amps 091-215-12 Auto Charge 1000 PLC, w/ Bar Graph Display 12 15 / 3 120 3.5 9.35” 5.90” 4.725” 11 Electrical Data Dimensions Part Number Description Wgt. 091-215-12-194B Auto Charge 1000 PLC, w/ Status Center 12 15 / 3 120 3.5 9.35” 5.90” 4.725” 11 DC Volts DC Amps AC Volts AC Amps L W H 091-215-12-194B-WT-XX Auto Charge 1000 PLC, w/ Watertight Display 12 15 / 3 120 3.5 9.35” 5.90” 4.725” 11 091-216-20/20 Auto Charge 20/20 12 20 / 20 120 8.5 13.125" 8.250" 5.233" 13 10 11 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Auto Charge® 1200 Built-In Display-Single Battery Bank Auto Charge® 1200 Remote Display - Single Battery Bank
Next Generation Single Battery Bank at 40 Amps Power Next Generation Low Profile Charger with PLC at 40 Amps with Parasitic Load Compensation Power Onboard Electronics Remote Display Included Features Features
• NEW Parasitic Load Compensation (PLC) allows • NEW Patented Parasitic Load Compensation (PLC), for user input of total accessory load amps on adjustable for 5-35 amperes B the vehicle. This allows the charger to shift the • NEW Low Profile-reduced height and lower in weight B attery absorption stage set point so the battery voltage • Allows user input of total accessory load amps on vehicle attery drops to the float voltage when desired current is • Ouput voltage regulated reached • Configurable for 3-Step or Float Charging • Patented PLC Technology • Selectable for 1,5, or 10 hour Safety Timer while in 3-Step C • NEW Low Profile-reduced height and lighter in mode C • Choice of Remote Display:
hargers weight hargers −− Single Bar Graph • Configurable for 3-Step or Float Charging −− Auto Charge Status Center • Choice of Built-in Display options: −− Bar Graph or Digital −− Auto Charge Status Center in Watertight Case −− Super Auto Eject Deluxe Cover- #091-55-234-XXX Bar • Choice of Remote Displays: −− Single Bar Graph Graph and #091-55-194-XXX Digital Display −− Auto Charge Status Center • Accommodates Lead -Acid,Gelled Electrolyte, AGM and −− Auto Charge Status Center in Watertight Case Odyssey® battery types • Optional E-Z Slide Mounting Plate for slide-in installation and removal of the Auto Charge 1200 Remote Display Options charger located in hard to access areas Remote Display Options • Accommodates Lead -Acid,Gelled Electrolyte, AGM and Odyssey® battery types
Optional Accessory Optional Accessory E-Z Slide Mount Plate: 091-200-EZM E-Z Slide Mount Plate: 091-200-EZM For slide-in installation and removal of the Auto For slide-in installation and removal of the Auto Charge 1200 Remote charger in hard to access Bar Graph Display Charge 1200 Remote charger in hard to access Bar Graph Display areas and spaces with minimal vertical clearance 091-199-001 Super Auto Eject areas and spaces with minimal vertical clearance 091-199-001 Super Auto Eject Deluxe Covers Available Deluxe Covers Available for this product for this product see page 40 see page 40
Status Center Display Status Center Display 091-194-IND Status Center Display in 091-194-IND Status Center Display in Watertight Case Watertight Case 091-194-IND-WT-XX 091-194-IND-WT-XX Color Options see page 6 Color Options see page 6 Electrical Data Dimensions Electrical Data Dimensions Part Number Description DC DC AC AC Wgt. Part Number Description Wgt L W H DC Volts DC Amps AC Volts AC Amps L W H Volts Amps Volts Amps 091-187-12 Auto Charge 1200 12 40 120 6.0 13.25" 6.80" 3.30" 7 091-187-12-REMOTE 1200 Remote w/ Bar Graph 12 40 120 6 13.25" 6.80" 3.30" 7 Auto Charge 1200 with 091-187-12-R-194 1200 Remote w/ Status Center 12 40 120 6 13.25" 6.80" 3.30” 7 091-187-12-194 12 40 120 6.0 13.25" 6.80" 3.30" 7 status center 091-187-12-R-194-WT-XX 1200 Remote w/ Watertight S.C. 12 40 120 6 13.25" 6.80" 3.30” 7 091-200-EZM EZ Slide Mount Plate N/A N/A N/A N/A N/A N/A N/A N/A 091-200-EZM EZ Slide Mount Plate N/A N/A N/A N/A N/A N/A N/A N/A All units also available in 240 VAC Input, contact the sales department for part number 12 All units also available in 240 VAC Input, contact the sales department for part number 13 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Auto Charge® 35/10 - Single Battery Bank Auto Charge® 40/20 - Single Battery Bank
Charge Single Battery Bank at 35 Amps Charge Single Battery Bank at 40 Amps Power Auxiliary Loads with 10 Amp Battery Saver Power Auxiliary Loads with 20 Amp Battery Saver Remote Display Included Remote Display Included M
B Features Features B attery attery • 35A battery charger with a 10A battery saver • 40A battery charger with a 20A battery saver • Automatic operation regulates the output to a single • Automatic operation regulates the output to a battery bank single battery bank
C • A patented built-in sense circuit checks the battery • Separate 20A ATC fuse protected Battery C voltage 120 times per second to compensate for a Saver output eliminates any drain on the hargers voltage drop in the charging wires providing a quick vehicles battery when in the station hargers re-charge and avoiding overcharging −− Clean output poses no interference with • A separate 10A Battery Saver output eliminates any radios and other mobile devices drain on the vehicle battery when in the station • Gel Cell, Lead-Acid, and AMG switch selects −− Automatically disconnects any auxiliary vehicle the optimum charge/float voltages based on loads from the battery when the charger the battery type is energized • 1-hour “boost” voltage for rapid −− Ideal for charging handheld lights and battery recovery portable radios • Automatic current limit −− 10A output with automatic overload current limit • Reverse polarity protected −− Not recommended for powering highly • AC input circuit breaker protection sensitive electronic loads • Front panel LED displays AC power applied and Battery Saver circuit overload Remote Display Options • A Remote Bar Graph Display is included • Includes a heavy duty aluminum case with a protective front panel plate and wire strain relief designed for emergency vehicle use Battery Saver Wiring Diagram Remote Display Options
Bar Graph Display Status Center Display 091-200-001 in Watertight Case 091-194-IND-WT-XX
Color Options Super Auto Eject YW RD BL Deluxe Covers Available Bar Graph Display Yellow Red Blue for this product Super Auto Eject 091-199-001 see page 40 Deluxe Covers Available Status Center Display WH GY BLK for this product 091-194-IND White Gray Black see page 40
Battery Saver Operation: When the battery charger is Electrical Data Dimensions operating, the vehicle’s accessories are powered by the Part Number Description DC DC AC AC Wt. 12V battery saver circuit, internal to the charger. When L W H Volts Amps Volts Amps the charger is powered off, a relay inside the charger switches the vehicle accessories directly to the battery. 091-216-40/20 Auto Charge 40/20 w/ Bar Graph 12 40 / 20 120 8.5 13.25” 7.13” 5.25” 13 Display Electrical Data Dimensions 091-216-40/20-194 Auto Charge 40/20 w/ Status Center 12 40 / 20 120 8.5 13.25” 7.13” 5.25” 13 Part Number Description Wgt. DC Volts DC Amps AC Volts AC Amps L W H 091-216-40/20-194-WT-XX Auto Charge 40/20 w/ Watertight 12 40 / 20 120 8.5 13.25” 7.13” 5.25” 13 091-35/10 AC 35/10 w/ Bar Graph Display 12 35 120 10 14.00” 5.50” 5.25” 26 Display 14 15 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Auto Charge® 1 and MM - Single Battery Bank Auto Charge® 11 Series - Dual Battery Banks
Auto Charge 1 Maintenance Master Charge Dual Battery Banks For Charging Small Batteries For Auxiliary Generators Power for Onboard Electronics Front Panel Amp Meter
10 11 HO
B Features B attery attery • 10 and 20A models are available • Automatically charges dual battery banks utilizing independent sense circuits that control voltage
C and current to each battery. Parasitic loads on C one battery do not effect the second hargers • Full amperage output is available to either battery hargers if the adjacent bank does not require charging, optimizing the use of available power when charging banks with differing parasitic load rates • Front panel amp meter indicates the total output current • Optional Remote Bar Graph display or LED indicator • Includes a heavy duty aluminum case with a Auto Charge 1 protective front panel plate and wire strain relief designed for emergency vehicle use • Model 11, UL recognized Features
• 1A charge rate is ideal for small 12V batteries Optional Configurations (5-20 Amp/Hour) and avoids overcharging • Automatically charges the battery AC Outlet in Front Panel: Model Shown is UL Recognized: Auto Charge 11 • Low ripple output won’t cause interference with 15A GFI duplex outlet with the electronics circuit breaker protection provides a plug-in point for AC • Current limited so it cannot be overloaded Maintenance Master accessories (PIM option) • Compact and sturdy molded case with mounting flanges for vehicle installation Remote Display Options • Fanless operation Features
• 5A, 12V charge rating (6 & 24V units also available) Dual Voltage Input: • Designed specifically for maintaining generator Selector switch on the front start batteries panel for 120 or 240V, 50-60 hz. • Automatically shuts off when batteries are fully input (DV) charged to avoid overcharging • Ammeter indicates the charge rate Dual Bar Graph Display LED Display 091-11-127 091-11-102-12 • Features a rugged aluminum case designed for industrial use • Compact size and is wall mountable Electrical Data Dimensions Part Number Description Wgt. DC Volts DC Amps AC Volts AC Amps L W H 091-11-12 Auto Charge 11 12 10 120 2.5 4.375" 5.50" 11.375" 12 Electrical Data Dimensions 091-11DV-12 Auto Charge 11 DV 12 10 120/240 2.5/1.3 4.375" 5.50" 11.375" 12 Part Number Description DC DC AC AC L W H Wgt. Volts Amps Volts Amps 091-11HO-12 Auto Charge 11 HO 12 20 120 4.7 4.25" 6.75" 12.75" 19 091-31-12 Auto Charge 1 12 1 120 .5 3.50" 2.25" 3.50" 3 091-11HO-DV-12 Auto Charge 11 HO-DV 12 20 120/240 4.7/2.4 4.25” 6.75" 12.75” 19 091-7-12 Maintenance Master 12 5 120 1 5.30" 5.50" 9.75" 9 091-11HO-PIM Auto Charge 11 HO-PIM 12 20 120 4.7 4.25” 6.75" 12.75” 19 091-7-24 Maintenance Master, 24 Volt 24 2.5 120 1 5.30" 5.50" 9.75" 9 091-11PIM Auto Charge 11 PIM 12 10 120 2.5 4.25” 6.75" 12.75” 12 16 17 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Auto Charge® 2000 PLC - Dual Battery Banks Auto Charge® 4000 - Dual Battery Banks
Charge Dual Battery Banks at 15 Amps Next Generation Dual Output Charger at 45 Amps Power Auxiliary Loads with 3 Amp Battery Saver Remote Display Included Remote Display Included
Features Features B B • 15A charger with a 3A battery saver • Next Generation 45A charger attery attery • Automatically charges dual battery banks utilizing • NEW- Low Profile-reduced height and lower in weight independent sense circuits that control the voltage and • Designed for vehicles with dual battery system current to each battery. Parasitic loads on one battery do • Output voltage regulated not effect the second • NEW-Acommodates Lead-Acid, Gelled Electrolyte, AGM C C • Precision voltage controller senses the battery voltage which and Odyssey® battery types hargers eliminates the need for sense wires • Auxiliary 15 amp output circuit with AC/DC selector switch hargers • Full amperage output is available to either battery bank if for operating accessory loads: air compressor pumps, the adjacent bank does not require charging, optimizing the handlights or handheld radios use of available power when charging banks with differing • Front panel connections for remote display and auxiliary parasitic load rates loads • Programmable Parasitic Load Compensation allows for • Includes a heavy duty aluminum case designed for the user to input the total accessory load on the vehicle (in emergency vehicle use amps). This allows the charger to shift the absorption stage • Power “On” LED indicator set point so the battery voltage drops to the float voltage • System Status Indicator when the desired current is reached • Separate 3A Battery Saver output eliminates any drain from auxiliary loads on the vehicle battery when in the station Remote Bar Graph Display −− Automatically disconnects auxiliary vehicle loads from the Included: battery when the charger is energized and powers them 091-39-IND from the internal power supply • Provides state-of-charge status • Includes a heavy duty aluminum case designed for when in the station emergency vehicle use Remote Bar Graph Display Included: 091-39-IND • Indicates charger “On” and • Provides state-of-charge operating status when in the station Battery Saver Wiring Diagram • Indicates charger “On” and operating Optional Accessory Remote Display Option
E-Z Slide Mount Plate: NEW Super Auto For slide-in installation and Eject Deluxe Cover Remote Display Option removal of the Auto Charge 4000 with Bar Graph charger in hard to access areas Display and Dual LED Indicator NEW Super Auto and spaces with minimal vertical available for this Eject Deluxe Cover clearance with Bar Graph product Display and Dual see page 40 LED Indicator available for this Battery Saver Operation: When the battery charger is product operating, the vehicle’s accessories are powered by the see page 40 12V battery saver circuit, internal to the charger. When Electrical Data Dimensions the charger is powered off, a relay inside the charger Part Number Description DC DC AC AC Wgt. L W H switches the vehicle accessories directly to the battery. Volts Amps Volts Amps 091-89-12 AC 4000, w/ Dual Bar Graph 12 45 120 6 13.25" 6.80" 3.30" 7 Electrical Data Dimensions 091-89-24 AC 4000, w/ Dual Bar Graph 24 20 120 3 13.25” 6.80” 3.30” 7 Part Number Description Wgt. DC Volts DC Amps AC Volts AC Amps L W H 091-200-EZM EZ Slide Mount Plate N/A N/A N/A N/A N/A N/A N/A N/A 091-237-12 AC 2000 PLC, w/ Dual Bar Graph 12 15 / 3 120 3.5 9.35" 5.90" 4.725" 17 Units also available in 240 VAC Input, contact the sales department for part number 18 19 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Auto Charge® D & D2 - Multiple Battery Banks Auto Charge® 20 - Three Battery Banks
Charge Dual or Triple Battery Banks at 28 Amps POWER Charge Three Battery Banks at 20 Amps Power Auxiliary Loads with 5 Amp Battery Saver Power Onboard Electronics
Remote Display Included 80 Front Panel Amp Meter
0 33AMPS
B Features Features B attery attery • 28A battery charger with a 5A battery saver • 20A for charging three battery banks • Designed for DDEC Vehicles • Automatically charges three battery banks utilizing • Automatic operation regulates the output to multiple independent sense circuits that control the voltage battery banks
C and current to each battery. Parasitic loads on one C • A patented built-in sense circuit checks the battery voltage battery do not effect the others hargers 120 times per second to compensate for a voltage drop in hargers • Full amperage output is available to any battery charging wires providing a quick re-charge if the adjacent banks do not require charging, without overcharging • Model D: two battery banks, Model D2: three battery banks optimizing the use of available power in charging • Separate 5A Battery Saver output eliminates any drain from banks with differing parasitic load rates auxiliary loads on the vehicle battery when in the station • Front panel amp meter indicates total output current −− Automatically disconnects auxiliary vehicle loads from the • Optional remote display battery when the charger is energized and powers them • Includes a heavy duty aluminum case with a from the internal power supply protective front panel plate and wire strain relief −− Not recommended for powering highly sensitive designed for emergency vehicle use electronic loads • Front panel LED displays AC power applied and Battery Saver circuit overload • Includes a heavy duty aluminum case designed for emergency vehicle use Optional Configurations AC Outlet in Front Panel: 15A GFI duplex outlet with circuit breaker protection Battery Saver Wiring Diagram provides a plug-in point for AC accessories (PIM option)
Remote Bar Graph Display Included with Auto Charge D: 091-66-IND Remote Display Options
Dual Voltage Input: Selector switch on the front panel for 120 or 240V, 50- 60 hz. input (DV)
Battery Saver Operation: When the battery charger is Bar Graph Display LED Display operating, the vehicle’s accessories are powered by the Remote Bar Graph Display Included with 091-118-022-12 091-11-102-12 12V battery saver circuit, internal to the charger. When Auto Charge D2: 091-74-IND the charger is powered off, a relay inside the charger • Provides state-of-charge status when in station switches the vehicle accessories directly to the battery. • Indicates charger “On” and operating Electrical Data Dimensions Part Number Description Wgt. DC Volts DC Amps AC Volts AC Amps L W H Electrical Data Dimensions 091-10-12 Auto Charge 20 12 20 120 4.7 4.25" 6.75" 12.75" 22 Part Number Description DC DC AC AC Wgt. L W H Volts Amps Volts Amps 091-10-24 Auto Charge 20, 24 Volt 24 10 120 4.7 4.25” 6.75" 12.75” 22 091-66-12 AC D, w/ Dual Bar Graph 12 25 / 5 120 8 5.25" 7.0" 13.25" 27 091-10-DV-12 Auto Charge 20 DV 12 20 120/240 4.7/2.3 4.25” 6.75" 12.75” 22 091-74-12 AC D2, w/ Triple Bar Graph 12 25 / 5 120 8 5.25” 7.0” 13.25” 28 091-10PIM Auto Charge 20 PIM 12 20 120 4.7 4.25” 6.75" 12.75” 22 20 21 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com LPC 45 Euro Chargers - Multiple Battery Banks
Charge 24V Single Battery Bank Charge Single, Dual or Triple Battery Banks Power Sensitive Electronics Low Profile Case Fits in Tight 120/240V Source Locations Front Panel Amp Meter
Euro Charger I Euro Charger II Euro Charger III
B Features B attery • 45A charger for 24VDC attery vehicle configuations • Light weight, small low profile size • Clean output poses no interference with
C radios and other mobile devices C • 15A, 24VDC auxiliary output circuit with a hargers hargers power source selector switch for operating accessory loads i.e., air compressor pumps, handheld lights or handheld radios • Front panel connections for a remote display and auxiliary loads 12A, Single or Dual Bank Output 18A, Triple Battery Bank 40A, Single or Dual Bank • Includes a heavy duty aluminum case designed for emergency vehicle use Features Remote Display Options • Remote battery sensing output to • 12, 18 and 40A models available compensate for longer charging cables • Wide variety of input/output options to meet various international applications • Automatically charges battery banks utilizing independent sense circuits that control the voltage and current to each battery. Parasitic loads on one battery do not effect the others LED Display Single Bar Graph Display • Automatically charges and supports parasitic DC loads: Remote Display Options 091-90-012-12 091-94-12E data terminals, radios, hand lights, etc. assuring battery For All Models For Euro Charger I & I VHO is ready for vehicle start • Full amperage output is available to any battery if the adjacent banks do not require charging • Front panel amp meter indicates the total output • Optional LED or Bar Graph Remote Displays available • 120/240V operation Bar Graph Display Status Center Display • Meets CE requirements Dual Bar Graph Triple Bar Graph 091-200-IND in Watertight Case • Includes a heavy duty aluminum case with a protective Display Display 091-194C-24-IND-WT-XX front panel plate and wire strain relief designed for 091-11-127-12 091-118-022-12 emergency vehicle use For Euro Charger II & II VHO For Euro Charger III Color Options Super Auto Eject Electrical Data Dimensions Part Number Description Wgt. YW RD BL Deluxe Covers Available DC Volts DC Amps AC Volts AC Amps L W H for this product Yellow Red Blue 091-90-12 Euro Charger I 12 12 120/240 2.6/1.3 4.375" 5.50" 11.375" 12 see page 40 091-90-24 Euro Charger I, 24 Volt 24 6 120/240 2.6/1.3 4.375" 5.50" 11.375" 12 Status Center Display WH GY BLK 091-194C-24-IND White Gray Black 091-162-12 Euro Charger I VHO 12 40 120/240 10/5 9.25" 9.375" 14.00" 33 091-162-24 Euro Charger I VHO, 24 Volt 24 20 120/240 10/5 9.25" 9.375" 14.00" 33 Electrical Data Dimensions 091-117-12 Euro Charger II 12 12 120/240 2.6/1.3 4.375" 5.50" 11.375" 17 Part Number Description DC DC AC AC L W H Wt. 091-117-24 Euro Charger II, 24 Volt 24 6 120/240 2.6/1.3 4.375" 5.50" 11.375" 17 Volts Amps Volts Amps 091-143-12 Euro Charger II VHO 12 40 120/240 10/5 9.25" 9.375" 14.00" 39 091-206-24 LPC 45, w/ Bar Graph Display 24 45 120 13 13.75” 7.00” 4.09” 10 091-143-24 Euro Charger II VHO, 24 Volt 24 20 120/240 10/5 9.25" 9.375" 14.00" 39 091-206-24-194C LPC 45, w/ Status Center 24 45 120 13 13.75” 7.00” 4.09” 10 091-118-12 Euro Charger III 12 18 120/240 4.7/2.4 4.25" 6.75" 12.75" 19 091-206-24-194C-WT-XX LPC 45, w/ Watertight Display 24 45 120 13 13.75” 7.00” 4.09” 10 091-118-24 Euro Charger III, 24 Volt 24 9 120/240 4.7/2.4 4.25" 6.75" 12.75" 19 12 VDC version available, see Page 7 for details 22 23 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Waterproof Charger - Single Battery Bank Battery Saver® - Low Ripple Series
Waterproof for Exposed Locations Automatically Power Onboard Computers and MDT’s When AC Line Applied Remote Display Included to Truck Preserves Vehicle Battery Features • 40A for charging a single battery bank • Sealed case allows for installations B in exposed locations B attery • Frees in-cab and compartment attery space by allowing charger installation in areas not suitable for standard chargers C • Sealed terminals C
hargers • Rugged anodized aluminum case hargers with an intergrated heat sinks for cool operation • Remote bar graph display included • Meets IP67
Battery Saver Low Ripple,HO Battery Saver LR 40,VHO
Remote Display Options Features Battery Saver Wiring Diagram
• 20A and 40A, 12V battery saver • Relay removes auxiliary loads from the vehicle battery and connects to the battery saver preventing the battery from discharging when it’s in the station • Clean, low ripple output causes no interference with sensitive electronics Bar Graph Display • Fast acting relay ensures “glitch” free power transfer Status Center Display 091-200-IND in Watertight Case • Current limiting prevents an overload 091-194-IND-WT-XX • Factory set to 13.2V • Front panel “Power On” indicator • Designed for rigors of emergency vehicle use; heavy Color Options Super Auto Eject duty case and components Deluxe Covers Available • USB Model Only: YW RD BL for this product −− Front panel USB interface is used for recharging Yellow Red Blue see page 40 Battery Saver Operation: When the battery charger is electronic devices i.e., iPhone operating, the vehicle’s accessories are powered by the Status Center Display WH GY BLK −− 5.0V, 1A USB Output 12V battery saver circuit, internal to the charger. When the 091-194-IND White Gray Black charger is powered off, a relay inside the charger switches the vehicle accessories directly to the battery.
Electrical Data Dimensions Part Number Description DC DC AC AC Wgt. Electrical Data Dimensions L W H Volts Amps Volts Amps Part Number Description DC DC AC AC Wgt. L W H Volts Amps Volts Amps 091-195-12 Battery Saver Low Ripple HO 12 20 120 4.5 2.50" 5.50" 13.00" 5 091-261-12 WP 600, Waterproof Charger 12 40 120 6.0 13.25” 7.875” 4” 13 091-195-12-USB Battery Saver Low Ripple HO, w/USB 12 20 120 4.5 2.50” 5.50” 13.00” 5 Unit also available in 240 VAC Input, contact the sales department for part number 091-256-12 Battery Saver Low Ripple,VHO 12 40 120 4.5 2.50” 5.50” 13.00” 5 24 25 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Section 2 Digital Displays Engine Monitor Digital read out of vital engine data: DC Voltage, Oil Pressure, IndiBacttateryors C /hargers Meters Temperature, and Tachometer Audio and visual alarm for out of limit conditions operates from the J1939 can bus input Features Status Center Digital • Programmable alarm set points for Oil, Temp, Voltage, and RPM Engine Monitor Generator Monitor Display With Bar • Internal audio alarm with a remote alarm output signal VOTT VAAFH Graph, Watertight • Input signal wire assembly with a waterproof Deutsch connector Page 27 Page 27 • 4”x4” low profile display S Page 28 • Waterproof meter face ection * New Feature- User Selectable Baud Rate ( 50, 125, 250, 500 or 1000k bits)
Status Center Digital Status Center Status Center Electrical Data Dimensions Part Number Description Wgt. Display With Bar Digital Display Digital Display Input Volts Input SIgnal L W H Graph, Standard Single Battery Dual Battery 023-4400-0 VOTT 9-33V DC J 1939 4.3” 4.3” 3.5” 2 Page 28 Page 28 Page 28 2 - I Generator/AC System Monitor Digital read out of vital generator data: AC Voltage, Frequency, I Auto Pump Status Auto Pump Status Remote Bar Amperage of two 120V legs of 240V circuit, Engine hours nd i cators Center Digital Display Center Digital Display Graph Displays Audio and visual alarm for out of limit conditions PSI Only Voltage & PSI Single, Dual & Triple ndicator s Features Page 28 Page 28 Page 29 • 4 functions, all display simultaneously on one screen: Volts, (2) Amps, Frequency • Hour meter displays when the generator is off / M • Programmable alarms: HIGH/LOW for Volts/Frequency and HIGH alarm for Super Auto Eject DC Volts & DC Ammeter Amps (2 lines). Alarm modes: Red warning color with a built in 85db audible alarm, with an output signal for an external alarm relay Deluxe Cover DC Amps Displays IN-3-XX • User programmable service hour interval settings and notification eters Page 30 Page 30 Page 30 • Waterproof meter face Electrical Data Dimensions Part Number Description Wgt. / M Operating Voltage Sense Voltage Max. Power L W H 023-4500-0 VAAFH 9-33 VDC 120/240 VAC 36 kW 4.3” 4.3” 3.5 2 LED Display LED Vertical Display IN-4 Display Mount Generator AC/DC System Monitor Page 30 eter s Page 30 Page 30 6 functions, all display simultaneously on one screen: Volts, Amps, Frequency, DC Volts, and DC Amps Audio and visual alarm for out of limit conditions Features Display Panel DC/AC Clamp Digital Auto • Programmable alarms: HIGH/LOW for AC Volts and Frequency and HIGH Rear Seal Meter Level alarm for Amps (2 lines). HIGH/LOW for DC Volts and HIGH alarm for Page 30 Page 31 Page 31 DC Amps • Alarm Modes: Red warning color visual indication, plus built in 85db audible, with output signal for external alarm relay. • User programmable service hour interval settings and notification • Waterproof meter face TG-3: DCE DCV Temperature DC Energy Display Voltmeter Display Display Page 31 Page 31 Electrical Data Dimensions Page 31 Part Number Description Wgt. Input Volts Input SIgnal L W H 091-247 VAAFH AC/DC 9-33V DC 0.100A 4.3” 4.3” 3.5 2 26 27 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Digital Displays Remote Bar Graph Displays
Status Center Digital Displays With Bar Graph
091-94-XX 091-76-XX 091-118-022-XX
This universal single battery bank This universal dual battery bank This universal three battery 091-194X-IND-WT-XX 091-194X-IND Voltage display may be installed in Voltage display may be installed in bank Voltage display may be Watertight Heavy Duty Housing Standard Housing any 12/24V system any 12/24V system installed in any 12/24V system Size: 5.45” x 3.95” Size: 3.2” x 4.7” (negative ground only) (negative ground only) These displays provide digital Voltage and Ampere readouts, a 5 segment bar graph indicating the output current, and 4 LED’s showing the battery condition. They are available in two different housings: standard and watertight. The watertight housing is available in multiple colors. This display is compatible with the Auto Charge 1000, Auto Charge 1200, Auto Charge 1200 Remote, LPC 20, LPC 40, LPC 80, Pump Plus 1000 and Pump Plus 1200 battery chargers.
Color Options: YW WH RD GY BL BLK Yellow White Red Gray Blue Black I I nd i cators nd i cators Status Center Digital Displays
091-199-001 091-39-IND 091-74-IND
/ M This charger specific single This charger specific dual bar This charger specific three / M battery condition bar graph graph battery condition display bank voltage display is normally display is normally supplied with is normally supplied with supplied with:
eters these chargers: these chargers: Auto Charge D2 eters Auto Charge 1000 PLC Auto Charge 2000 PLC 091-189-12 (1 decimal place accuracy) 091-189-2-12 (1 decimal place accuracy) Auto Charge 35/10 Auto Charge 4000 091-189-12-3.5D (2 decimal place accuracy) 091-189-2-12-3.5D (2 decimal place accuracy) Auto Charge 1200 Remote Pump Plus 2000 PLC Single Battery Display Dual Battery Display Pump Plus 1000 PLC Size: 3.2” x 4.7” Size: 3.2” x 4.7” Pump Plus 1200 These universal displays are compatible with all vehicles with or without Kussmaul chargers. They display the voltage digitally and indicate the battery condition via LED’s. The LED’s flash when high or low voltage is sensed. These displays are available in 1 or 2 battery bank models, one or two decimal accuracy, and 12 or 24V systems.
Auto Pump Status Center Digital Displays
091-200-IND 091-66-IND 091-234 This charger specific single This charger specific dual bar This charger specific single 091-198-12-AP 091-198-12-PP battery condition bar graph graph battery condition display battery condition mini bar graph PSI Only Voltage & PSI display is normally supplied with is labeled “Vehicle” and “Engine” display is an option for the Size: 3.2” x 4.7” Size: 3.2” x 4.7” these chargers: and is normally supplied with following chargers: These displays are an air pressure sensor with an indicator that displays in PSI. The “AP” display contains a numerical LPC 20 these chargers: Auto Charge 1000 PLC display for PSI and a bar graph. The “PP” display contains a numerical display, a bar graph for PSI, and a 3.5-digit LPC 45 Auto Charge D Auto Charge 1200 Remote display for battery voltage. They both work in conjuction with an air pressure sensor. The air pressure sensor port is LPC 40 Auto Charge D Pump Plus Pump Plus 1000 PLC connected to an air supply to measure and display the PSI. The indicator is designed to be mounted on the exterior of LPC 80 Pump Plus 1200 a vehicle so that the PSI condition may be easily viewed. 28 29 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Analog and LED Displays Test Equipment and Digital Displays
Bar Graph Display Digital Display Bar Graph Display 091-55-234-XX 091-55-194X-XXX with Dual LED 091-55-239-XXX DC/AC Clamp Meter Super Auto Eject Deluxe Covers 380941 with Battery Charger Indicators Features Incorporates Auto Eject and Indicator in one product. • Inductive clamping jaw allows current measurement Extreme Duty Cover with Bar Graph or Digital without disconnecting the wiring or shunt, 0.9” opening • Accurate data on all major DC/AC electrical functions Display compatible with select single Kussmaul battery • Convenient hand-held device chargers or Bar Graph Display with Dual LED Indicator Auto Level • Easy-to-read LCD display for AC2000 and AC4000 battery chargers. For more 091-251 • Long easy-grip, color coded, needle-type test probes information see page 40. • Operates on two AA batteries (provided) • Protective carrying case included • Measures and Displays: −− AC Voltage up to 400V AC Optional: −− AC/DC Current up to 200A Level Alarm- with High −− Frequency at 50-10 KHz
I Decibal Audible Alarm I nd i cators 091-260-S (12V) nd i cators 091-260-S-24 (24V)
Auto Level and Level Alarm Kits Available on Request IN-4 IN-3-XX Please call Customer Service This indicator can be used 091-11-102-12
/ M with any charger. The neon The 091-11-102-12 is a remotely / M This display is for the Pump Plus pilot light indicates when mounted LED battery condition Features HO Battery Charger/Air Compressor power is applied to the display. This display is used with: • 2 Digit LED-Digital Angle Display vehicle. A DC ammeter is eters system. It will not operate with other Auto Charge 12 • 8 PCB surface mounted LEDs: Green and Yellow eters used to measure the battery chargers. Auto Charge 12HO : Temperature Display • One wire zero calibration: can be recalibrated chargers output current. TG-3 Auto Charge 11 023-4350-0 • Auto Orientation Detection: vertical or horizontal Please specify ammeter Auto Charge 11HO Features • Waterproof: meets IP 64 current (15, 20 or 25) when • Lexan overlay Auto Charge 20 • Sensor range: -20 to 160° F (-29 to 71° C) ® ordering. • 3 Zone input • 3 Axis sensor • Full-scale LCD Read out accurate within • Easy connection to 12V or 24V switched power 1% +/-1 degree • Reverse polarity protected Display Installation Accessories • Five level back lighting “On” LED display • Two #8 mounting holes • Programmable HIGH/LOW temperature alarm- • Optional: Audible Level Alarm activates 85db warning alarm • Includes mounting gasket • Programming via instrument front buttons • Waterproof face fits a standard 2.125” instrument hole • Includes (1) remote temperature sensor with 20’ cable
Displays Volts, Amps, energy Three battery bank digital used, and remaining for 12/24V, read out for 12/24V battery up to 500A and 3,000A/h systems. Includes a HIGH/ capacity. Monitor Voltage on LOW Voltage alarm built- up to three separate banks in. Wires directly to the Vertical Display Mount Display Panel Rear Seal to monitor: batteries, no charger 091-91-013 091-39-109 connection required. Push This is an ABS plastic housing designed specifically This rubber watertight seal was designed specifically for 1. Charge/discharge amperage button selection of battery for any Kussmaul bar graph display. This housing any Kussmaul bar graph display. This seal protects the 2. Total energy: amp-hours or bank reading. lets you mount your bar graph on the dashboard rear of the bar graph. percent-of-charge or anywhere else inside your vehicle. Display sold 3. Alarms: HIGH/LOW voltage Size: 2 1/2” Square Face, separately. DCE: DC Energy Display and low amp-hours remaining DCV: Voltmeter Display 2 1/8” Diameter Mounting 023-4346-0 023-4348-0 Hole, 2 3/8” Rear 30 Meter Projection 31 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Section 3 Auto Eject WP
Eject Plug from Shore Power on AC POWER AC POWER DC POWER Engine Start 15 15 AMPS 20 Cord Eject Systems AMPS AMPS Features
• 15/20A AC, or 15A DC receptacle Auto Eject WP Dynamic Disconnect Rear Enclosure • Upon sensing the engine starting, the plug ejects from receptacle and away from the Page 33 Page 33 Page 33 S vehicle which eliminates cord hazards • After ejection a weatherproof cover snaps ection into position over the inlet • 3.4” rear projection installs in the vehicle side walls with a limited depth clearance EZ Mounting Plate EZ Mounting Plate Super Auto Eject • Available in 6 different colors For Auto Eject WP For Super Auto Eject Page 34 Page 33 Page 34 System includes: Auto-Eject, Cover and Plug 3 - C
Super Auto Eject Optional Accessories Super Trailer Auto Super 30 Auto Eject with Deluxe Cover Eject Page 36 Dynamic Disconnect: Page 35 Sequences energizing of the Auto Eject ord Page 34 which eliminates terminal arcing when Weatherproof connecting and disconnecting to the receptacle Cover Color Options Dynamic Disconnect 091-18-098 YW RD E Yellow Red Super 30 Auto Eject - Air Eject / Rear Enclosure: Super 16 Auto Eject Air / Electric HP Air Eject For installations that expose the rear of the WH GY ject Page 38 Page 37 Page 39 Auto Eject to outside elements White Gray
BL BLK Blue Black C S Rear Enclosure Auto Eject WP Dimensions
091-18CP ord Weatherproof EZ Mounting Plate Auto Clean EZ Mounting Plate with Power Indicator: y s tem Adapter Kit For Air Eject
Page 39 Assemble and pre-wire the Auto Eject in E Page 39 Page 39 this stainless steel plate, then mount to the vehicle wall. A green indicator light confirms j ec t the inlet is energized S
Weatherproof y s t e m Name Plates Wire & Wiring Kits Wiring Accessories: Covers EZ Mounting Plate with Page 40 Page 41 Retractable Cord, Wiring Kits, and Rubber Page 40 Power Indicator 091-185-010 Plug Protectors (See page 41)
Electrical Data Dimensions Part Number Description Wgt. DC Volts DC Amps AC Volts AC Amps L W H 091-18WP-120 WP Auto Eject 12 N/A 120 15 3.40” 3.30” 5.70” 2 Receptacles Connectors WPR-1 091-20WP-120 WP Auto Eject 12 N/A 120 20 3.40” 3.30” 5.70” 2 Page 41 Page 41 Page 41 091-18WP-012 WP Auto Eject (12V/240V) 12 15 240 15 3.40” 3.30” 5.70” 2 When ordering specify: Cover color code • 24V for 24 volt actuator operation 32 33 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Super Auto Eject Super Auto Eject with Deluxe Cover
Auto Eject and Charger Status in One Eject Plug from Shore Power On AC POWER AC POWER DC POWER AC POWER AC POWER DC POWER Engine Start Product 15 15 Features 15 15 AMPS 20 AMPS AMPS 20 Features AMPS AMPS AMPS • 15/20A AC, or 15A DC receptacle • 15/20A AC, or 15A DC receptacle • Auto Eject- senses the engine starting, • The Super Auto Eject plug ejects from the receptacle the plug ejects from the receptacle and and away from vehicle which eliminates cord hazards away from vehicle which eliminates • The Super Trailer Auto Eject plugs ejects from the cord hazards receptacle upon engaging brake pedal prior to vehicle • Indicator displays the battery charger going into gear status • Sequences energizing of the Auto Eject • Deluxe Lid opens 180 degrees which eliminates terminal arcing when connecting and • Works with Kussmaul Battery Chargers disconnecting to the receptacle C A L L F O R M O R E I N F O R M AT I O N • After ejection a weatherproof cover snaps into position • Sequences energizing of the Auto Eject over the inlet which eliminates terminal arcing when • A weatherproof back enclosure with a watertight cable connecting and disconnecting to the Bar Graph Display has 10 RED fittings protects the mechanism from road contamination receptical LED bars • Pre-wired with a 3’ AC cord and an eject sense • A sealed weatherproof rubber gasket Digital Display has 3 digit wire. Entry of the unit is on the side in the standard protects the mechanism from numerical GREEN LED display configuration, a back entry is also available on request. road contamination for amps and voltage System includes: Auto-Eject, Cover, Plug, 3’ AC System includes: Auto-Eject, power (pre-wired) and an Eject Sense Wire • Works with many Kussmaul single Weatherproof Deluxe Cover, Plug, 3’ AC Bar Graph Display with Dual LED Battery Chargers CALL FOR Optional Accessories Cover Color Options power (prewired) and an Indicator MORE INFORMATION EZ Mounting Plate with Power Indicator: Eject Sense Wire • Compatible with Kussmaul Dual Assemble and pre-wire the Auto Eject in this YW RD Battery Chargers, AC2000 and stainless steel plate, then mount to the vehicle wall. A Yellow Red AC4000 green indicator light confirms the inlet is energized. WH GY Other Accessories: White Gray Retractable Cord, Wiring Kits, and Rubber Plug Protectors (see page 41) BL BLK See page 34 for Color Cover Options, Blue Black Configurations, Dimensions and Optional Accessories Optional Configuration Super Auto Eject Dimensions Bar Graph Display Digital Display NEW Bar Graph Display
C Back Wire: with Dual LED C
ord For installations with ord rear rather than side wire orientation, EZ Mounting Plate Electrical Data Dimensions E with Power Indicator Part Number Description Wgt. Color E specify BW when DC Volts DC Amps AC Volts AC Amps L W H 091-185-009 j ec t ordering j ec t 61-11-2106 Bar Graph Display, 15 12 N/A 120 2.80” 4.08” 6.17” 4 YW 63-11-2106 (234) 20
S 61-11-3106 Digital Display (194), 15 S for single battery y s t e m 12 N/A 120 2.80” 4.08” 6.17” 4 YW y s t e m chargers with output 63-11-3106 of 40A 20 Electrical Data Dimensions Part Number Description Wgt. Digital Display (194C), DC Volts DC Amps AC Volts AC Amps L W H for single battery 61-11-6106 12 N/A 120 20 2.80” 4.08” 6.17” 4 YW 091-55-15-120 Super 15 Auto Eject 12 N/A 120 15 2.80” 4.08” 6.17” 4 chargers with output of 80A 091-55-20-120 Super 20 Auto Eject 12 N/A 120 20 2.80” 4.08” 6.17” 4 Digital Display (239), 15 091-55-15-DC Super 15 Auto Eject - DC 12 15 240 15 2.80” 4.08” 6.17” 4 for AC 2000/4000 dual 63-11-7106 12 N/A 2.80” 4.08” 6.17” 4 YW 091-55-15-120T Super 15 Trailer Eject 12 N/A 120 15 2.80” 4.08” 6.17” 4 battery chargers with output of 20A 20 091-55-20-120T Super 20 Trailer Eject 12 15 240 15 2.80” 4.08” 6/17” 4 Contact Sales Department for additional kit configurations and colors 091-55-15-DCT Super Trailer 15 Eject - DC 12 15 240 15 2.80” 4.08” 6/17” 4 When ordering specify: Cover color code • BW for back wire option • 24V for 24 volt actuator operation 34 35 800-346-0857 • email: [email protected] TM TM 800-346-0857 • email: [email protected] www.kussmaul.com www.kussmaul.com Super 30 Auto Eject Super 30 Auto Eject - Air / Electric
Eject 30 Amp Plug from Shore Power On AC POWER AC POWER AC POWER Eject 30 Amp Plug from Shore Power & Air Line AC POWER /PSI AC POWER /PSI