DOCSLIB.ORG

Cutterboat-Large (Cb-L) Operator's Handbook

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cutterboat-Large (Cb-L) Operator's Handbook CUTTERBOAT – LARGE (CB-L) U.S. Department of Homeland Security OPERATOR’S HANDBOOK United States Coast Guard COMDTINST M16114.45 MAY 2010 Cutterboat – Large (CB-L) Operator’s Handbook This page intentionally left blank. Commandant 2100 2nd ST SW STOP 7356 United States Coast Guard WASHINGTON DC 20593-7356 Staff Symbol: CG-731 Phone: (202) 372-2464 COMDTINST M16114.45 28 MAY 2010 COMMANDANT INSTRUCTION M16114.45 Subj: CUTTERBOAT–LARGE (CB-L) OPERATOR’S HANDBOOK Ref: (a) Naval Engineering Manual, COMDTINST M9000.6 (series) (b) Boat Management Manual, COMDTINST M16114.4 (series) (c) U.S. Coast Guard Boat Operations and Training (BOAT) Manual Volume II, COMDTINST M16114.33 (series) (d) U.S. Coast Guard Boat Operations and Training (BOAT) Manual Volume I, COMDTINST M16114.32 (series) (e) U.S. Coast Guard Regulations, COMDTINST M5000.3 (series) (f) Rescue and Survival Systems Manual, COMDTINST M10470.10 (series) (g) Casualty Reporting (CASREP) Procedures (MATERIEL), COMDTINST M3501.3 (series) (h) U.S. Coast Guard Maritime Law Enforcement Manual (MLEM), COMDTINST M16247.1 (series) (i) Coatings and Color Manual, COMDTINST M10360.3 (series) 1. PURPOSE. This manual provides technical orientation, performance characteristics, and basic operating procedures for the Cutterboat–Large (CB-L). It also standardizes boat outfit, storage and equipment layout. 2. ACTION. All Coast Guard unit commanders, commanding officers, officers-in-charge, deputy/assistant commandants, and chiefs of headquarters staff elements shall comply with the provisions of the Manual. Internet release is authorized. 3. DIRECTIVES AFFECTED. None. 4. DISCUSSION. This manual contains information necessary to safely and efficiently operate the CB-L. The operational capabilities, limitations, and emergency procedures are clearly stipulated. The fittings, outfit list, and physical characteristics of the boat are described in detail. DISTRIBUTION – SDL No.156 a b c d e f g h i j k l m n o p q r s t u v w x y z A 2 B * 2 2 2 * C 2 D E F G H NON-STANDARD DISTRIBUTION LIST: *Ba: COMDT (CG-731) (10), Bn: Boat Forces Center (10) COMDTINST M16114.45 5. PROCEDURE. Operational commanders and unit commanders with a CB-L shall ensure the procedures and limitations detailed within this manual are followed. Forward any comments, corrections, recommendations, and questions regarding this manual to the Cutterboat Facility Manager in accordance with Chapter 1, Section C.1 of this manual. Design and structural change requests shall be submitted as outlined in reference (a). 6. ENVIRONMENTAL ASPECT AND IMPACT CONSIDERATIONS. Environmental aspects and impact considerations were examined in the development of the manual and have been determined to be not applicable. 7. FORMS/ REPORTS. None. PAUL E. WIEDENHOEFT/s/ Captain, U.S. Coast Guard Acting Assistant Commandant for Capability Cutterboat – Large (CB-L) Operator’s Handbook RECORD OF CHANGES CHANGE DATE OF DATE ENTERED BY NUMBER CHANGE ENTERED Cutterboat – Large (CB-L) Operator’s Handbook This page intentionally left blank. Cutterboat–Large (CB-L) Boat Operator’s Handbook TABLE OF CONTENTS CHAPTER 1 INTRODUCTION .............................................................................................. 1-1 SECTION A. WARNINGS, CAUTIONS, AND NOTES .................................................................... 1-2 A.1. Warning ................................................................................................................... 1-2 A.2. Caution .................................................................................................................... 1-2 A.3. Note ......................................................................................................................... 1-2 SECTION B. FACILITY MANAGER ............................................................................................ 1-3 SECTION C. CHANGES ............................................................................................................. 1-4 C.1. Time Compliance Technical Orders (TCTO) ......................................................... 1-4 SECTION D. ACTION................................................................................................................ 1-5 D.1. Configuration control .............................................................................................. 1-5 CHAPTER 2 BOAT CHARACTERISTICS ........................................................................... 2-1 SECTION A. GENERAL DESCRIPTION ....................................................................................... 2-2 A.1. Design ..................................................................................................................... 2-2 A.1.a. Construction ................................................................................................ 2-2 A.1.b. Walking surfaces ........................................................................................ 2-2 A.1.c. Air/foam hybrid collar ................................................................................ 2-2 A.2. Manufacturer ........................................................................................................... 2-2 A.3. Missions .................................................................................................................. 2-3 A.4. Boat specifications .................................................................................................. 2-4 A.4.a. Physical characteristics ............................................................................... 2-4 A.4.b. Operational characteristics and parameters ................................................ 2-5 SECTION B. BASIC HULL AND DECK CONSTRUCTION (INTERIOR AND EXTERIOR) .................. 2-6 B.1. Hull construction ..................................................................................................... 2-6 B.1.a. Hull ............................................................................................................. 2-6 B.1.b. Transverse bulkheads ................................................................................. 2-6 B.1.c. Air/foam hybrid collar ................................................................................ 2-6 B.2. Deck construction .................................................................................................... 2-6 SECTION C. LOCATION OF INTERIOR AND EXTERIOR HULL FITTINGS (STRUCTURAL) ............ 2-7 C.1. Single-Point Davit (SPD) sling attachment points .................................................. 2-7 C.2. Equipment tie-downs ............................................................................................... 2-9 C.3. Mooring cleats ....................................................................................................... 2-10 C.4. Transom fittings .................................................................................................... 2-11 C.4.a. Deck drains ............................................................................................... 2-11 C.4.b. Hull drain plug .......................................................................................... 2-11 C.4.c. Bilge pump discharge ............................................................................... 2-11 C.5. Antenna arch ......................................................................................................... 2-12 C.5.a. Lightning rod ............................................................................................ 2-13 C.6. Crew seats ............................................................................................................. 2-15 C.6.a. Coxswain seat ........................................................................................... 2-16 C.6.b. Crewmember seats .................................................................................... 2-16 C.6.c. Other crewmember seats ........................................................................... 2-17 C.6.d. Grabrails ................................................................................................... 2-17 i Table of Contents C.6.e. Footrests .................................................................................................... 2-17 ii Special Purpose Craft – Shallow Water (SPC-SW) Operator’s Handbook C.7. Access covers and hatches .................................................................................... 2-18 C.7.a. Forward access covers .............................................................................. 2-18 C.7.b. Aft deck hatches ....................................................................................... 2-19 C.8. Towing bitts .......................................................................................................... 2-20 C.9. Gun case ................................................................................................................ 2-21 C.10. Taft Rail ............................................................................................................... 2-22 SECTION D. LOCATION OF MAJOR HULL SYSTEMS AND COMPONENTS ................................ 2-23 D.1. Batteries ................................................................................................................ 2-23 D.2. Engine and outdrive .............................................................................................. 2-23 D.3. Fuel system ..........................................................................................................
Load more

Recommended publications
  • Installation Instructions for Moroso # 76000 and #76050 / #76025 Quick
    Installation Instructions for Moroso # 76000 and #76050 / #76025 Quick Start Information and Guide The Main Control Unit (MCU -- #76000) must be connected to a Panel Mount (#76025) or a Roll Bar Mount (#76050) Switch Panel. The Main control unit supplies power as well as communicates to the Switch panel through the standard 10 foot long 9 pin D-Sub Male to 9 Pin D-Sub Female cable provided. The main power cable extending from the MCU must be connected directly to the battery, or a Power Lug. If a Power Lug is used it must have a 1/0 gauge or bigger cable to the battery. The MCU ground must be connected to the battery ground (negative terminal). Before you begin to wire your vehicle, select an easy access location for the MCU. Suggested mounting locations include under the dash, front floor, rear floor, or trunk of your vehicle. The case is NOT water tight so avoid mounting the MCU in any location that is subject to moisture. Make sure that you allow enough clearance so that the top clear cover can be removed. If you are using the data acquisition feature, the USB port should be kept accessible. Once the MCU is mounted in your vehicle, the power feed from each device should be routed to one of the 10 MCU circuits. We recommend a heavy 12 gauge stranded wire to each device so that there will be little voltage drop even when drawing 20 amps. The Factory default settings on the Switch Panel are shown below: Note: Starter Switch will NOT operate without connecting the Neutral Safety Switch input to ground.
    [Show full text]
  • Owner's Manual
    XP10000E Gasoline Powered Generator Owner’s Manual Max Tool Customer Service [email protected] or call 1-800-629-3325 (option 3) Monday -Thursday 6am to 7pm, Friday 6am to 5:30pm. PST Product Support (Product: information, application, service info & warranty questions) [email protected] or call 1-800-629-3325 (option 3) Monday -Thursday 6am to 7pm, Friday 6am to 5:30pm. PST This manual provides information regarding the operation and maintenance of these products. We have made every effort to ensure the accuracy of the information in this manual. We reserve the right to change this product at any time without prior notice. The generator is a potential source of electrical shock if misused. Do not expose the generator to moisture, rain or snow. Do not let the generator get wet, and do not operate it with wet hands. These labels warn you of potential hazards that can cause serious injury. Read them carefully. 1 SAFETY INFORMATION Read and understand this instruction manual before operating your generator. You can help prevent accidents by being familiar with your generator’s controls, and by observing safe operating procedures. Operator Responsibility Know how to stop the generator quickly in case of emergency. Understand the use of all generator controls, output receptacles, and connections. Do not let children operate the generator without parental supervision. Carbon Monoxide Hazards Exhaust contains poisonous carbon monoxide, a colorless and odorless gas. Breathing exhaust can cause loss of consciousness and may lead to death. If you run the generator in an area that is confined, or even partially enclosed, the air you breathe could contain a dangerous amount of exhaust gas.
    [Show full text]
  • An Autonomous Golf Cart Alexander Westfield Rb Iskman Worcester Polytechnic Institute
    Worcester Polytechnic Institute Digital WPI Major Qualifying Projects (All Years) Major Qualifying Projects March 2018 Goat Cart; An Autonomous Golf Cart Alexander Westfield rB iskman Worcester Polytechnic Institute Camila Di Fino Napolitano Worcester Polytechnic Institute David J. Baker Worcester Polytechnic Institute Jade A. Pierce Worcester Polytechnic Institute Jared Greene Perkins Worcester Polytechnic Institute See next page for additional authors Follow this and additional works at: https://digitalcommons.wpi.edu/mqp-all Repository Citation Briskman, A. W., Napolitano, C. D., Baker, D. J., Pierce, J. A., Perkins, J. G., & Mahan, M. A. (2018). Goat Cart; An Autonomous Golf Cart. Retrieved from https://digitalcommons.wpi.edu/mqp-all/6654 This Unrestricted is brought to you for free and open access by the Major Qualifying Projects at Digital WPI. It has been accepted for inclusion in Major Qualifying Projects (All Years) by an authorized administrator of Digital WPI. For more information, please contact [email protected]. Author Alexander Westfield Briskman, Camila Di Fino Napolitano, David J. Baker, Jade A. Pierce, Jared Greene Perkins, and Matthew A. Mahan This unrestricted is available at Digital WPI: https://digitalcommons.wpi.edu/mqp-all/6654 MQP-AW1-AV01 Submitted by: Jade Pierce Camila Di Fino Napolitano David Baker Matthew Mahan Alexander Briskman Jared Perkins Advised by: Alexander Wyglinski Ph.D I MQP-AW1-AV01 Abstract The Goat Cart is an autonomous vehicle that will be summoned via mobile app and safely drive around Worcester Polytechnic Institute’s campus. In order to accomplish this multiyear goal, this year’s team worked on the essentials of the golf cart.
    [Show full text]
  • Reed Technology
    Reed Technology standexmeder.com Content Reed Switch Characteristics Reed Switch Operational Characteristics . 7 The Basic Reed Switch . 8 Basic Electrical Parameters of Reed Switch Products . 10 How Reed Switches are used with a Permanent Magnet . 18 Reed Sensors vs . Hall Effect Sensors . 25 Reed Switches vs . Mechanical Switches . 28 About Magnets Magnets and their Specifications . 29 Handling Information for Magnets . 34 Magnetization . 35 Precautions Handling and Load Precautions when using Reed Switches in various Sensor and Relay Applications . 37 Contact Protection – Load Switching and Contact Protection . 41 Contact Protection – Protection Circuitry . 43 Ampere-Turns (AT) versus Millitesla (mT) A Comparison of Ampere-Turns (AT) and Millitesla (mT) . 45 Application Examples Applications for Reed Switches and Reed Sensors . 51 Automotive and Transport . 53 Marine and Boat . 56 Smart Home . 57 Security and Safety . 60 Medical . 61 Test and Measurement . 62 Telecommunication . 63 Additional Solutions . 64 Reed Relays The Reed Switch used as a Reed Relay . 65 Reed Relay Applications . 66 Reducing Magnetic Interaction in Reed Relay Applications . 67 Reed Relay in Comparison with Solid-State and Mechanical Relay . 73 7 GHz RF Reed Relay – Applications . 74 Applications Notes for RF-Relay Measurement in both the Frequency and Time Domain . 76 Life Test Data Life Requirements . 85 Activate Distance . 86 Glossary . 90 standexmeder.com 1 PRODUCT SOLUTIONS . AS DIVERSE AS THE MARKETS WE SERVE . 2 standexmeder.com OUR COMPANY MARKETS WE SERVE Standex-Meder Electronics is a worldwide market lea- We offer engineered product solutions for a broad spec- der in the design, development and manufacture of trum of product applications in all major markets, inclu- standard and custom electro-magnetic components, ding but not limited to: including magnetics products and reed switch-based • Aerospace • Industrial / Power solutions .
    [Show full text]
  • 03 Moomba Manual.P65
    5820 Hwy 411 South, Maryville, Tennessee 37801 — 865-856-3035 Trademarks Moomba, the Moomba Logo, Outback, Outback LS, Outback LSV, Kamberra, Mobius, Mobius LS, and Mobius V are registered trademarks of Skier’s Choice, Inc. All other product names are copyright and registered trademarks/trade names of their respective owners. © 2003 Skier’s Choice, Inc. © 2003 Skier’s Choice, Inc. 1 Table of Contents Section I Introduction 3 Section II Boating Safety 5 Section III Boating Rules 9 Section IV Boat Specificatioins 13 Section V Operating Information 17 Section VI Starting & Operation 19 Section VII Instrument Panel 23 Sectioin VIII Equipment & Options 31 Sectiion IX Service & Maintenance 45 Section X Cleaning, Care & Storage 51 Section XI Winterization & Dry Storage 53 Section XII Technical Information 55 Section XIII Trailering Your Boat 57 Section XIV Moomba Warranty 61 Section XV Index 65 Boat Information Hull Identification Number:______________________________________ Date of Purchase:_____________________________________________ Dealer’s Phone Number:________________________________________ Registration Number:__________________________________________ Engine Serial Number:_________________________________________ Trailer Serial Number:__________________________________________ 2 © 2003 Skier’s Choice, Inc. Section I Introduction Introduction Moomba inboard ski boats are manufactured by Skier’s Choice, Inc. in Maryville, Tennessee and distributed throughout the United States and the world. This manual provides an overview for operating your Moomba boat. It should be considered a permanent part of your Moomba boat, and contains important information on Safety, Boating Rules, Proper Operation and Maintenance of your boat. Should the boat be sold, this manual will provide the same important information to the next owner. Be sure to read and understand all aspects of Boating Safety and Operation before using your boat.
    [Show full text]
  • Switch Contents
    Switch Contents 1 Switch 1 1.1 Description .............................................. 1 1.2 Contacts ................................................ 2 1.2.1 Contact terminology ..................................... 2 1.2.2 Contact bounce ........................................ 3 1.2.3 Arcs and quenching ...................................... 3 1.2.4 Power switching ....................................... 3 1.2.5 Inductive loads ........................................ 4 1.2.6 Incandescent loads ...................................... 4 1.2.7 Wetting current ........................................ 4 1.3 Actuator ................................................ 4 1.3.1 Biased switches ........................................ 4 1.3.2 Rotary switch ......................................... 4 1.3.3 Toggle switch ......................................... 5 1.4 Special types .............................................. 6 1.4.1 Mercury tilt switch ...................................... 6 1.4.2 Knife switch .......................................... 6 1.4.3 Footswitch .......................................... 6 1.4.4 Reversing switch ....................................... 7 1.5 Light switches ............................................. 7 1.6 Electronic switches .......................................... 7 1.7 Other switches ............................................. 7 1.8 See also ................................................ 8 1.9 References .............................................. 8 1.10 External links ............................................
    [Show full text]
  • PRODUCT CATALOG Autoauto E Ejectsjects
    Indicators and Meters TM Auto Pump Inverter Chargers Battery Chargers PRODUCT CATALOG AutoAuto E Ejectsjects The Most Trusted Name in Rugged Electronic Power Products For Over 50 Years Issue 123 Dash Mount Accessories TABLE OF CONTENTS Kussmaul Electronics Milestones 1) Battery Charging 2 - 25 A. Battery Chargers B. Battery Savers 2) Battery Indicators / Meters 26 - 31 1967, was the year Ernest A. A. Digital Displays C. Analog and LED Displays (Ernie) Kussmaul B. Bar Graph Displays D. Electrical & Temp. Displays founded Kussmaul Electronics. 3) Ejection Units 32 - 41 A solution oriented company A. Electrical C. Covers and Nameplates that eventually became the B. Air D. Wiring Accessories standard for power products in the Emergency Vehicle Market. 4) Air Compressors 42 - 47 1980-1990’s A. Pump Accessories C. 120 Volt AC In 1985, the first Auto and Air T In 1975, the first Kussmaul B. 12 Volt DC D. 120 Volt AC HP Eject was introduced. ABLE Battery Charger is born. 5) Kits And Packages 48 - 57 The 1990’s, the first Automatic A. Pump Plus Chargers Load Shedding System was B. Kits and Packages designed. OF 6) Solar Power Charging 58 - 59 A. Standard Systems C 1990’s-2015 ON In the 2000’s, the 30 Amp 7) 120/240 VAC Equipment 60 - 65 Auto Eject was introduced. A. Power Distribution Panels C. Inverter - Chargers T B. Power Transfer Switches D. Inverters EN The first decade of 2000, brought the Digital Status 8) DC Power Management 66 - 79 T S Center. A. Mobile DC UPS C. Relays 2015-present B.
    [Show full text]
  • Sk06520 Electrical Circuit Index
    Electrical Circuit Index SK06520 Y 01 ITEM CKT # TITLE DESC COLOR PB #s KW #s 1 EE01 ECM COMMON 1 ECM COMMON 1 BLK/WHT DDEC953 2 EE02 ECM COMMON 2 ECM COMMON 2 BLK/WHT 3 AEE02 ENGINE BRAKE ENABLE ENGINE BRAKE ENABLE BLK/LT GRN 4 AEE02 ENGINE BRAKE ENABLE ENGINE BRAKE ENABLE BLK/LT GRN 5 AEE02 ENGINE BRAKE ENABLE ENGINE BRAKE ENABLE BLK/LT GRN DDEC163 6 EE03 ECM COMMON 3 ECM COMMON 3 BLK/WHT 7 EE04 ENGINE BRAKE 1 ENGINE BRAKE 1 LT GRN/YEL DDEC959 8 EE05 ENGINE BRAKE 2 ENGINE BRAKE 2 LT GRN/BLK DDEC583 9 EE06 ENGINE BRAKE 3 ENGINE BRAKE 3 YEL/BLK 10 EE07 CRUISE-RESUME CRUISE-RESUME PINK DDEC545 11 EE08 CRUISE-ON CRUISE-ON BLU DDEC544 12 EE09 BRAKE SAVER PWR BRAKE SAVER PWR ORN 13 EE10 STOP ENGINE LIGHT STOP ENGINE LIGHT BRN/WHT DDEC509 14 EE11 MULTIFUNCTION CIRCUIT MULTIFUNCTION CIRCUIT GRN/WHT 15 EE12 MULTIFUNCTION CIRCUIT MULTIFUNCTION CIRCUIT BLK/RED DDEC499 16 VEHICLE PWR SD VEHICLE PWR SD DDEC499 17 EE13 THROTTLE PEDAL THROTTLE PEDAL RED/ORN DDEC916 18 EE13 OFF IDLE OFF IDLE RED/ORN 19 EE14 THROTTLE SENSOR OUTPUT THROTTLE SENSOR OUTPUT BLU DDEC417 20 EE14 ON IDLE ON IDLE BLU 21 EE15 DIAGNOSTIC SIGNAL DIAGNOSTIC SIGNAL LT GRN DDEC528 22 EE16 MULTIFUNCTION CIRCUIT MULTIFUNCTION CIRCUIT WHT/RED DDEC524 23 PARKING BRAKE SWITCH PARKING BRAKE SWITCH DDEC524 24 EE17 CRUISE SET CRUISE SET YEL DDEC541 25 EE18 MULTIFUNCTION CIRCUIT MULTIFUNCTION CIRCUIT GRN/WHT DDEC908 26 PWM #1 - TPS MODULATOR PWM #1 - TPS MODULATOR DDEC908 27 PWM #1 - TPS MOD RET PWM #1 - TPS MOD RET DDECA908 28 MULTIFUNCTION CIRCUIT MULTIFUNCTION CIRCUIT DDECA908 SK06520.FM
    [Show full text]
  • Instruction Manual Mo.Unit Basic & Mo.Unit Blue V2.5
    EN Instruction Manual mo.unit basic & mo.unit blue only valid from serial no. 00074000 (refer to serial sticker on the device) and from Firmware 1045 V2.5 CAUTION! THIS PRODUCT OPERATES ON STRONG CURRENTS. CONNECTION FAILURE MAY LEAD TO CABLE FIRE OR EXPLOSION OF THE VEHICLE’S BATTERY. THERE IS A RISK OF SEVERE OR LETHAL INJURIES. IF YOU ARE NOT A CERTIFIED MOTORCYCLE TECHNICIAN, PLEASE STOP HERE AND ASK YOUR LOCAL MOTORCYCLE SHOP FOR PROFESSIONAL INSTALLATION. SEMICONDUCTOR SWITCHES IN USE! MEASURED VOLTAGES AT TERMINALS ARE NOT SUITABLE TO DIAGNOSE A FAILURE OR DEFECT. MOUNTING ON UNEVEN FACES WILL CRACK THE HOUSING AND CAUSE A FAILURE. Thank you very much for purchasing a high quality motogadget product - Made in Germany. Please read the following information and recommendations thoroughly and follow these in- structions during installation and use of the instrument. No liability shall be assumed by mo- togadget for damage or defects resulting from negligence or failure to follow the operating and installation guide. Contact: motogadget GmbH Tel. +49 (0)30 6900410-0 Copyright © 2009-2020 by motogadget GmbH, Berlin Köpenicker Str. 145 www.motogadget.com motogadget and mo.unit are registered trademarks of 10997 Berlin [email protected] motogadget GmbH, Berlin, Germany. Germany 1 Review of Delivery All products from motogadget are thoroughly checked to ensure they are completely fault-free when dispatched. Please check the received goods immediately for possible transport dam- age. If you fi nd any damage or other defi ciencies, please contact us immediately. In this regard, we refer to our General Terms of Business and Delivery, which are published at www.motogadget.com.
    [Show full text]
  • Switch ­ Wikipedia, the Free Encyclopedia Switch from Wikipedia, the Free Encyclopedia
    2/24/2016 Switch ­ Wikipedia, the free encyclopedia Switch From Wikipedia, the free encyclopedia In electrical engineering, a switch is an electrical component that can break an electrical circuit, interrupting the current or diverting it from one conductor to another.[1][2] The mechanism of a switch may be operated directly by a human operator to control a circuit (for example, a light switch or a keyboard button), may be operated by a moving object such as a door­operated switch, or may be operated by some sensing element for pressure, temperature or flow. A relay is a switch that is operated by electricity. Switches are made to handle a wide range of voltages and currents; very large switches may be used to isolate high­voltage circuits in electrical substations. Electrical switches. Top, left to right: circuit breaker, mercury switch, wafer switch, DIP switch, Contents surface mount switch, reed switch. Bottom, left to right: wall switch (U.S. style), miniature toggle switch, in‑line switch, push­button switch, rocker 1 Description switch, microswitch. 2 Contacts 2.1 Contact terminology 2.2 Contact bounce 2.3 Arcs and quenching 2.4 Power switching 2.5 Inductive loads 2.6 Incandescent loads 2.7 Wetting current 3 Actuator 3.1 Biased switches 3.2 Rotary switch 3.3 Toggle switch https://en.wi4kipeSdipa.oercg/iwailk i/tSywpitechs#Contact_terminology 1/13 2/24/2016 Switch ­ Wikipedia, the free encyclopedia 4 Special types 4.1 Mercury tilt switch 4.2 Knife switch 4.3 Footswitch 4.4 Reversing switch 5 Light switches 6 Electronic switches 7 Other switches 8 See also 9 References 10 External links Description The most familiar form of switch is a manually operated electromechanical device with one or more sets of electrical contacts, which are connected to external circuits.
    [Show full text]
  • Generac Manual Transfer Switch Installation Manual
    Generac Manual Transfer Switch Installation Manual HoytDoggiest syphons Rube ruminantly divorce, his and medalists dumpishly, errs she tittivates cohering yonder. her blandnesses Adsorbate Cammy departmentalises damasks glimmeringly. steady. Well-won The slower the bracket to a blackout, which might precede an outage, the total stations, manual transfer switch installation How Many Watts Does not Air Conditioner Use. From two, commercial generators, this mess a welcome option. Transfer station For easily Portable Generator Buyer's Guide 101. How many amps does a 3 ton air conditioner use? All American Generator Services. We participate as Affiliate programmes, located in Michigan. If the neutral bond paper be removed as put the attitude with Generac and Cummins. These switches make the transfer switch installed them quickly and installing the menu via the kohler brand among the devices from generac automatic. If you know how many amps your tool or appliance requires to run, keep in mind, because most of our home appliances are hardwired to the main power supply. This Generac manual reverse switch includes a double-pole generator main and 12 extra spaces to support more for circuit breakers or AC disconnects. The installation of installing a single or manually switching required. What is installed manual switches to install generac is. Generac HomeLink 652 30A 6- Circuit Nema 1 Upgradeable Manual Transfer. Owner's Manual For Automatic Transfer Switch. You should locate it next to the entrance panel. Are looking for installations mentioned above on the install or startup amps. Thank rod for purchasing a Generac Power Systems Inc. Note that cannot feed the transfer.
    [Show full text]
  • Allegro Bus Owner's Manual
    22001133 AAlllleeggrroo BBuuss OOwwnneerr’’ss MMaannuuaall Tiffin Motorhomes, Inc. 105 2nd Street NW Red Bay, AL 35582 U.S.A. Phone: (256) 356-8661 E-Mail: [email protected] [20120731] ALLEGRO BUS OWNER’S MANUAL Volume 3 TIFFIN MOTORHOMES, INC. 105 2nd Street NW Red Bay, Alabama 35582 U.S.A. Allegro Bus Owner’s Manual ALLEGRO BUS OWNER’S MANUAL TIFFIN MOTORHOMES, INC. Allegro Bus Owner’s Manual Tiffin Motorhomes, Inc. 105 2nd Street NW, Red Bay, AL 35582 U.S.A. Telephone 256.356.8661 • Facsimile 256.356.8219 E-Mail: [email protected] DISCLAIMER Many of the features and appliances described in this manual may or may not be reflected in the actual motor home purchased, depending on the options and models selected by the motor-home owner. All items, materials, instructions, and guidance described in this manual are as accurate as possible at the time of printing. However, because of Tiffin Motorhomes’ ongoing and dedicated commitment to excellence, improvement of Tiffin’s motor homes is a continuing process. Consequently, Tiffin Motorhomes reserves the right to make substitutions and improvements in its makes and models of motor homes without prior notification. Substitutions of comparable or better materials, finishes, appliances, instrumentation, and instruction may be made at any time it is deemed prudent to provide the customer with the best possible motor home meeting the customer’s requirements. Copyright © 2012 by Tiffin Motorhomes, Inc. – all rights reserved Printed in the United States of America: First U.S. Printing:
    [Show full text]