CARRIER MEF compliant, carrier-grade and next generation Ethernet network services.

Are you looking for a Swiss domestic Service providers and mobile operators ­Ethernet carrier with synchronous ser- can also benefit from the synchronous YOUR BENEFITS AT A GLANCE vices that has coverage beyond tradi- clocking provided across the next gener- – MEF compliance: MEF-industry standards tional IP-MPLS networks and, all this with ation UPC Wholesale delivered by UPC Wholesale enables you to deliver services in new spheres and to migrate attractive conditions? Carrier Ethernet network. legacy services without risks from UPC Wholesale includes MEF com- – True : Well-defined, pliance with ­carrier-grade synchronous Enhanced Service Management leading performance and quality parameters Ethernet services across Switzerland.­ The first-class OAM-performance man- gives you the ability to operate at a significant agement suite is designed so that carriers higher service level than on traditional Ethernet without Limitations and service providers can truly manage ­Ethernet networks Carrier Ethernet services have now networks from one service access point – Service Management: The first-class become a mainstream solution, the tradi- to another right across the network. OAM-performance-management provides tional Ethernet Services were normally you deepest service detail views to efficiently The OAM solution enables the efficient manage networks end to end created using IP-MPLS networks, but UPC operation, administration and mainte- Wholesale has gone one step further and – Simplicity to drive costs down: The Carrier nance of customer networks according to Ethernet network-implementation from is now including MPLS-TP that better individual processes. In the case of a UPC Wholesale reduces complexity and pro- suits Carriers and Service Providers as vides you with more competitive pricing in problem the system’s capabilities, which this supports the ability to route over well combination with leading service availability include alarming and rapid activation of known paths. This creates resilience and reliability automatic re-routing, will constantly options that were formally reserved for – Exclusive Backbone for B2B: Highly secure detect faulty network elements and mas- SDH networks. network architecture for wholesale customers sively speed up the resolution of a case as The other headache was for the migration well as meeting customer expectations of legacy services, within the flexibility of for resilience. This system has the addi- this product and the availability of vari- tional feature of measuring specific SLA able bandwidth the problem then disap- parameters such as jitter and latency and pears. There are no uncontrolled band- keeping these indicators constantly width limitations and the customer has monitored. flexibility for all of their services. Next Generation Ethernet UPC Wholesale is strictly following MEF Using multiple classes of service within standards which creates a flexible, scal- this NGN Carrier Ethernet, increases Ser- able and smooth interconnection with vice provider and Mobile operators ability features such as port, VLAN based ser- to lower cost structures and also vices and class of service (CoS), where a increases interconnection possibilities for great Ethernet customer experience and a easy, efficient and manageable redundant true end to end service transparency is Ethernet foot print. assured. Our service is based on the next genera- tion Carrier Ethernet 2.0 standard.

> Choose UPC Wholesale options that fit your needs with low Latency and jitter-free performance

UPC Wholesale has the broadest, MEF compliant, transparent and synchronous ­Carrier Ethernet portfolio in Switzerland for your next generation Ethernet applications. The Carrier Ethernet service allows you to connect your sites as fully managed service from UPC Wholesale — securely and efficiently.

Carrier Ethernet 2.0 Services Service Value Additions Configure and choose your Carrier Ethernet service from E-Line (point to point EVC) UPC Wholesale according to your and your customer’s commercial UNI-UNI Connect two sites end-do end and technical requirements. — Bandwidth options: Easy and flexible bandwidth adaptions: Band- E-LAN (multipoint to multipoint EVC) width can be chosen from 2 Mbit/s up to 1 Gbit/s with hierarchical UNI-UNI bandwidth and information rates according to the MEF-standard Sharing of regular data amongst sites (CIR/EIR). Higher bandwidths are available on request. E-Tree (routed multipoint EVC) — Resilience options: Redundant and pre-configured connectivity UNI-UNI paths between two or more sites can be designed according to Connect multiple sites with strict your connectivity requirements. Dependent on the availability needs communication-policies of your service, equipment resilience can be ordered as an option. — Quality of Service: Choose the bandwidth profile-classifications as E-Access (point to point OVC) UNI-ENNI Class of Service. Fully transparent according to MEF 2.0 Connect a customer site to a carrier — SLA options: You can choose various leading SLAs that cover detailed commercial and technical parameters. E-Line — Interface types: Carrier Ethernet with CPE options includes The site-to-site connectivity enables communication between two sites. the interfaces:­ 10/100/1000Base-T, 100Base-TX,1000Base-SX, E-LAN 1000Base-LX and 10GBase-SR/LR The multipoint-to-multipoint service is designed that multiple sites — The option without CPE includes: 1000Base-BX,1000Base-LX, can communicate with each other. 1000Base-ZX and 10GBase-SR/LR E-Tree This service lets you strictly rule, how sites can communicate. Central service roots can communicate with all leaves but leaves only Details in this document do not constitute a binding offer. Subject to modification with the root. This guarantees that leave-site traffic is kept secure without notice. Date of publication: Aprli 2018 and separate. E-Access The E-Access is a wholesale variant to connect a UNI with an ENNI (OVC). TDM Service types The TDM-based service type T-Line can be implemented in unstructured or structured emulation mode and complies with MEF-3/8 EEC slave clock is provided according to ITU-T G.8262 MEF standard compliance The Carrier Ethernet 2.0 service complies with MEF-6.1, MEF-3/8, MEF-10.2, MEF-22.1 and MEF-26.1 Performance Monitoring UPC Wholesale supports IEEE 802.3ah Ethernet OAM and IEEE 802.1ag Service Layer OAM and ITU-T Y-1731 recommendations.

upc.ch/business | 0800 678 900