PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD INDOOR SCOREBOARD 8218 Basketball Volleyball Wrestling Segment Timing
Total Page:16
File Type:pdf, Size:1020Kb
PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD INDOOR SCOREBOARD 8218 Basketball Volleyball Wrestling Segment Timing OVERALL DIMENSION 6’ 10”high x 12’ wide x 5” deep. (w/ EMC, 8’2”high x 10’ wide x 5” deep.) INFORMATION DISPLAYED Game Time, Home and Guest Score, Period, Time Outs Left, Team Fouls/Score, Bonus, Double Bonus, Possession. Information may vary depending on variations. DIGITS 18”, 16”, 14” Bright Red and Amber, 7-Segment LEDs. INDICATORS 2” Red and Amber LED Indicators. CAPTIONS White vinyl letters. HORN Includes external 100 dB horn. 120dB Trumpet horn is available. CONSTRUCTION 5” extruded aluminum frame, .093” thick. Faces made from shatter proof polycarbonate. STANDARD COLORS (Custom Colors Available) ELECTRONICS 100% solid state, microprocessor controlled system. SERVICING Front access for ease of servicing. Plug in modules for ease of replacement. MICROPROCESSOR CONTROL Sold separately. Extruded Aluminum, high impact low profile microprocessor control CONSOLE console, latest state of the art, user friendly. Size: 13.25” wide x 5” high x 9” deep. Weight: 6 lbs. Microprocessor to be supplied with 25 feet of cable (hardwire). Microprocessor control console with membrane keyboard provides for direct entry of all information. Radio Control is available. JUNCTION BOX One dual-system capable junction box, 4” x 2” with cover and ethernet cable. (Hardwire) DATA CABLE Twisted pair, direct burial, RJ45 Connectors (Hardwire). POWER REQUIREMENTS 115/230 VAC. 50/60 Hz. Minimum one 20A circuit is recommended. INSTALLATION May be mounted to nearly any wall surface. WEIGHT Net 300 lbs / Shipping 525 lbs. (w/ EMC, Net 359 lbs / Shipping 600 lbs) WARRANTY Five year guarantee against defects in materials and workmanship. Factory repair service for parts in warranty. Union label. UL Certified. STANDARD VARIATIONS - Add suffix to model number in order that they appear below (see examples on next page) Model + C Without Time Outs Left. Model + X Team Fouls/Score manufactured with “88” digits rather than “18” - ideal for wrestling. Model + EC 6” LED Electronic Captions in place of Fouls, Player Foul sections. Model + TN 6” LED Team Names (8x48 Matrix). Model + EMC Everbrite Message Center built into the cabinet. (9” High Text, 8x112 Matrix) Model + LOGO Logo/Sponsor area in place of Player Foul. Model + RV2 Radio upgrade. 2.4 GHz spread spectrum, 1500’ expected range. www.allamericanscoreboards.com Specifications subject to change without notice. REV. 4/7/2015 PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD EXAMPLES OF VARIATIONS This page shows samples of boards within the 8218 family. Not all “Standards” are shown. Boards that fall outside of these options will be considered custom and will require additional engineering. 8214C 8218CLOGO 8218CTN 8218TN 8218CXECTN 8218EMC INDOOR SCOREBOARD INSTALLATION REFER TO ENGINEERED DRAWINGS FOR ACTUAL MEASUREMENTS Scoreboard MUST be mounted in at least 4 points. Mounting Brackets are supplied on the top and bottom of score- board. Refer to supplied engineering drawing for proper measurements and number of mounting points. Using lifting angle (attached to top mounting brackets), lift scoreboard to desired location and bolt to wall. Because wall types may vary, type of bolt cannot be recommended nor supplied by All American Scoreboards. Refer to scoreboard weight and wall type before determining installation method. In rare cases, additional structure may be necessary. All American Scoreboards (AAS) and/or Everbrite, LLC shall not be held liable for improper installation. AAS recommends the scoreboard be installed by a licensed contractor, and must meet all local and national building codes. AAS recommends using a boom, forklift, or crane of suitable size to use in installation. 6’ The horn may be installed by removing the 4x4 backing, mounting the 8’ back to a solid wall and replacing the front of the unit. Plug the cord in the horn outlet on the top left of the scoreboard. Hardwire Connection / Hardwire Override LIFTING BRACKET Controller and Power Supplies MOUNTING BRACKET To Access Digits and Internal Components To access the internal components (Digits, Indicators, Power Supplies, PC Boards), simply remove the extruded front angle on the right side of the scoreboard. The controller plate and power supplies will be located behind the home score (guest score in baseball) on the left side of the scoreboard. Slide the face panel out far enough to reach the component that needs to be replaced or serviced. AAS recommends using a lift to service scoreboard. Use extreme caution when handling face panels. Hard Wire Setup / Hardwire Override Capable Using a Dual Capable Junction Box All radio scoreboards have the ability to be used via hardwire. When installed properly, the radio on the scoreboard will turn off when a console is plugged into the hardwire input (console still sends radio signal). Data travels over leads 4 & 5, while the hardwire override signal travels over 3 & 6. A Radio board may also pass data to a hardwired board using The same wiring methods. The 8000 Series Console can plug directly into the scoreboard via a standard CAT5 cable and RJ45 connections. It may be necessary or convenient to use a data splitter. 67 8 Outdoor boards will require a water tight junction box. Data connections will 3 45 1 2 be directly connected to the receiver board in scoreboard. Data connection Male RJ45 Connector and AC power cannot run in same conduit. J101 RJ45 Scoreboard 1+2 1 2 3 4 5 6 7 8 Scoreboard 1 Scoreboard 1 Scoreboard 2 Scoreboard 2 J102 J103 BLUE GREEN BROWN 1 1 Scoreboards 1 & 2 8 BLUE / WHITE 2 GREEN / WHITE BROWN / WHITE 2 7 GREEN / WHITE 3 GREEN 3 6 4 BLUE / WHITE 4 5 5 BLUE 5 4 GREEN 6 GREEN / WHITE 6 25 Ft CAT 5 CABLE 3 BROWN / WHITE 7 7 2 BROWN 8 1 8 RJ45 RJ45 BROWN / WHITE 5 SCBD 2 BROWN 4 SCBD 2 STANDARD WIRING GREEN = 8000 Series Multi-Sport Console 6 SCBD 1 & 2 (HARDWIRE ONLY) BLUE / WHITE 5 SCBD 1 ADDITIONAL WIRING FOR RADIO UNITS ONLY = TRANSMITTER MODULE FCC ID:KQL-PKLR2400-200 IC:22683911808A3 17 Setup Instructions: WARNING! This device complies with Part 15 of the FCC Rules. Operation is HARDWIRE OVERRIDE subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including BLUE Press once to turn on. interference that may cause undesired operation. Follow prompts on screen. 4 SCBD 1 (RADIO SCOREBOARDS WITH WARNING! This equipment has been approved for mobile applications where equipment should be used at distances greater than 20cm from the human body Press and hold to turn off. (with the exception of hands, wrists, feet and ankles). Operation at distances less GREEN / WHITE than 20cm is strictly prohibited. Excessive RF exposure should be avoided. SCBD 1 HARDWIRE OPTION) 3 REQUIRES DIODE SCBD 2 3 REQUIRES GREEN / WHITE STORING: DIODE Battery should be fully charged when storing, and should be kept at room temperature. Recharging once every 30 to 45 days of storage is recommended. If batteries are stored longer, it may take two or three cycles before full run time is restored. NUMBERS REFER TO PINS ON RJ45 CONNECTOR Back of Console 4 Conductor Twisted Data Cable (Length Specified w/ Order) TO JUNCTION BOX (HARDWIRE ONLY) 4 Conductor Twisted Data Cable (Length Specified w/ Order) THESE COLORS REFER TO AAS 3 - RED 4 - WHITE 4-CONDUCTOR 6 - BLACK 4 - WHITE 5 - GREEN 3 - RED 3 - RED 5 - GREEN 6 - BLACK 4 - WHITE SHIELDED CABLE 5 - GREEN 6 - BLACK R B G W S W G B R S W G B R R B G W S W G B R RECEIVER BOARD IN SECONDARY BOARD RECEIVER BOARD IN SCOREBOARD Surface Mount Jack (THIS BOARD MAY BE HARDWIRED OR RADIO) RECEIVER BOARD IN SCOREBOARD SCBD 5 DATA 4 HARDWIRE 6 OVERRIDE 3 D6 D5 D4 D3 D2 D1 7 D6 D5 2 D4 D3 D2 D1 D6 D5 D4 D3 D2 D1 Secondary 8 1 Scoreboard, Stat Panel, Etc. Scoreboard 1 Scoreboard 2 or Auxilarary Board *Actual scoreboard configurations may differ. (Scoreboard, Timer, Pitch Count, Shot Clock, etc) PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD 12'-0" 144.00 70.875” 70.875” 84.3125” [6'-10"] 82.00 5.00 12'-0" 144.00 70.875” 70.875” 100.3125” 8'-2" 98.00 W/ EMC OPTION, HEIGHT IS 1’4” TALLER 5.00 PRODUCT SPECIFICATIONS TYPICAL INDOOR SPONSOR PANEL INSTALLATION MOUNTING HARDWARE (NOT INCLUDED) TO BE DETERMINED BY INSTALLATION SITE TO PROVIDE A SECURE CONNECTION TOP PANEL MOUNTING TOP PANEL MOUNTING ANGLE DETAIL ANGLE DETAIL BOTTOM OF BOARD (TYPICAL LEFT & RIGHT END) (TYPICAL LEFT & RIGHT END) TOP OF BOARD MOUNTING HARDWARE (NOT INCLUDED) TO BE DETERMINED BY INSTALLATION SITE TO PROVIDE A SECURE CONNECTION #8 X 1/2 HEX WASHER HEAD DRILL SCREWS (PROVIDED). SCREW THROUGH PANEL INTO MOUNTING ANGLE. TYPICAL LEFT & RIGHT ENDS..