DOCSLIB.ORG

Lecture 13 Circular Motion

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lecture 13 Circular Motion LECTURE 13 CIRCULAR MOTION 3.8 Motion in two dimensions: circular motion What hold you up at the top of a loop- 6.1 Uniform circular motion the-loop? Or do you need to be held up? Velocity and acceleration in uniform circular motion Period, frequency, and speed 6.2 Dynamics of uniform circular motion Maximum walking speed 6.3 Apparent forces in circular motion Centrifugal force? Apparent weight n circular motion Centrifuges Learning objectives 2 ! Relate period, frequency, and speed of an object in a uniform circular motion. ! For an object in a circular motion, relate its acceleration, mass, speed, net force on it, and the radius of the curvature of the path. ! Identify the directions of net force and acceleration of an object in a circular motion. 3.8 Circular motion / 6.1 Velocity and acceleration in uniform circular motion 3 ! The magnitude of centripetal acceleration for uniform circular motion is given by #$ ! = % 6.1 Period, frequency, and speed 4 ! Period, !, is the time interval it takes an object to go around a circle one time. ! Frequency, ", is the number of revolutions per second. 1 " = ! ! The speed of an object in a uniform circular motion is 2'( % = = 2'(" ! Quiz: 6.1-1 5 ! Human centrifuges such as the one shown are used to study the effect of acceleration on the human body and train pilots and astronauts. This one has a radius of 6.1 m and can reach the maximum frequency of 1.1 s!" in as little as around 10 s. ! The image below shows an instance after it is turning at the maximum speed. Draw a vector showing the direction of acceleration for an occupant in the human centrifuge. Top view Quiz: 6.1-1 answer 6 ! Human centrifuges such as the one shown are used to study the effect of acceleration on the human body and train pilots and astronauts. This one has a radius of 6.1 m and can reach the maximum frequency of 1.1 s!" in as little as around 10 s. ! The image below shows an instance after it is turning at the maximum speed. Draw a vector showing the direction of acceleration for an occupant in the human centrifuge. ! The direction of the acceleration of an object in a uniform circular motion is towards the center of the circular path. Top view Quiz: 6.1-2 7 ! Human centrifuges such as the one shown are used to study the effect of acceleration on the human body and train pilots and astronauts. This one has a radius of 6.1 m and can reach the maximum frequency of 1.1 s!" in as little as around 10 s. ! What is the magnitude of the acceleration of the occupant in m/s2 when it is moving at the maximum speed? Quiz: 6.1-2 answer 8 ! Human centrifuges such as the one shown are used to study Limits of tolerance of humans the effect of acceleration on the human body and train pilots and astronauts. This one has a radius of 6.1 m and can reach the maximum frequency of 1.1 s!" in as little as around 10 s. ! What is the magnitude of the acceleration of the occupant in m/s2 when it is moving at the maximum speed? & & % ()'* ( !" ( ! # = = = + 2-. = 6.1 m 2- 1.1 s = ' ' 290 m⁄s( ! This is 308. Humans cannot tolerate this much acceleration for too long. https://en.wikipedia.org/wiki/G-force 6.2 Dynamics of uniform circular motion 9 ! The magnitude of a net centripetal force required for an object with a mass ! going around in a circular path with a radius " with a uniform speed # is given by #* $ = !) = ! %&' " Quiz: 6.2-1 / demo 10 ! A hollow tube lies flat on a table. A ball is shot through the tube. As the ball emerges from the other end, which path does it follow? Quiz: 6.2-1 answer / demo 11 ! A hollow tube lies flat on a table. A ball is shot through the tube. As the ball emerges from the other end, which path does it follow? ! C ! The normal force by the wall of the tube on the ball is the centripetal force necessary for the ball to follow the circular path. ! Without the wall, the ball goes in a straight path due to its inertia. Quiz: 6.2-2 12 ! You are in the front passenger seat of a car. While the car makes a sharp left turn, you found yourself leaning toward the passenger door (to your right). Which of the following statements is/are correct? Choose all that apply. A. Centrifugal force is pushing you to the right. B. Centripetal force is pushing you to the right. C. The seat is exerting a leftward frictional force on you. D. The seat is exerting a rightward frictional force on you. Quiz: 6.2-2 answer 13 ! The seat is exerting a leftward frictional force on you. ! For you to make the turn, there must be centripetal force acting on you toward the center of the curvature. ! The static frictional force by the seat on your bottom is supplying that centripetal force. ! Meanwhile, your head tends to keep going in a straight path due to its inertia. ! This fictitious “force” to the right is sometimes called “centrifugal force.” But there is no such force. Quiz: 6.2-3 14 ! Suppose you are rotating your arm so that your hand is undergoing a vertical uniform circular motion. ! What is the direction of the force your wrist exerts on your hand at the lowest point of the circle? Quiz: 6.2-3 answer 15 ! Suppose you are rotating your arm so that your hand is undergoing a vertical uniform circular motion. ! What is the direction of the force your wrist exerts on your hand at the lowest point of the circle? ! The tension in the wrist on the hand is providing the centripetal force necessary for the hand to go in a circular motion. !"# $%# Quiz: 6.2-4 16 ! Suppose you are rotating your arm so that your hand is undergoing a vertical uniform circular motion. The speed of your hand is 10 m/s (22 mph). Your arm is 0.50 m, and your hand is 0.45 kg. ! What is the magnitude of the force in N your wrist exerts on your hand at the lowest point of the circle? Quiz: 6.2-4 answer 17 ! Suppose you are rotating your arm so that your hand is undergoing a vertical uniform circular motion. The speed of your hand is 10 m/s (22 mph). Your arm is 0.50 m, and your hand is 0.45 kg. ! What is the magnitude of the force in N your wrist exerts on your hand at the lowest point of the circle? ./ ! ! = & − * = ,- = , "#$ '( +( 0 ./ ./ ./ ! & = * + , = ,2 + , = , 2 + '( +( 0 0 0 / > ?@ A/C ! & = 0.45 kg 9.8 m⁄s + = 94 N '( @.D@ A &'( ! If your weight is 500 N, and hang with one arm, the tension in the arm would be 500 N. So 94 N is a reasonable value. *+( Quiz: 6.2-5 18 ! Suppose you are rotating your arm so that your hand is undergoing a vertical uniform circular motion. The speed of your hand is 10 m/s (22 mph). Your arm is 0.50 m, and your hand is 0.45 kg. ! Is the apparent weight of the hand heavier than, lighter than, or equal to the actual weight of the hand at the lowest point of the circle? Quiz: 6.2-5 answer 19 ! The apparent weight of the hand is heavier than the actual weight of the hand. ! The apparent weight of the hand is the contact forces that supports it from free-falling. ! The tension by the wrist on the hand is the apparent weight. ! The tension is greater than the weight of the hand. !"# $%# Quiz: 6.3-1 20 ! You ride a bicycle comfortably around a loop- the-loop. Select all the correct statements when you are at the top of the loop-the-loop. A. There is a gravitational force downward on the bicycle-person system. B. There is a normal force downward on the bicycle- person system. C. The faster you are moving the greater the net force downward. Quiz: 6.3-1 answer / demo 21 ! You ride a bicycle comfortably around a loop-the-loop. Select all the correct statements when you are at the top of the loop-the-loop. A. There is a gravitational force downward on the bicycle-person system. B. There is a normal force downward on the bicycle-person system. C. The faster you are moving the greater the net force downward. - ., *+, ! If your bicycle is touching the track, the normal force on the bicycle is non-zero and downward (normal to the surface). ! The inward force required to make an object move in a circular motion increases '( with increasing speed: ! = & "#$ ) ! Follow-up: What happens if the bicycle is moving very lowly? Quiz: 6.3-1 answer / demo 22 ! The inward force required to make an object move in a circular motion increases '( with increasing speed: ! = & "#$ ) ! Follow-up: What happens if the bicycle is moving very lowly? ! The smaller the speed at the top of the loop-the-loop, the smaller the normal - force, but the smallest it can be is zero. If you do not have enough speed at the ., *+, top (critical speed), the gravitational force will cause you to accelerate more than is needed to go in a circle, and you will come off the track (http://www.youtube.com/watch?v=tzQJNeqiGG4).
Load more

Recommended publications
  • An Instrumented Centrifuge for Studying Mouse Locomotion and Behaviour Under Hypergravity Benjamin J
    © 2019. Published by The Company of Biologists Ltd | Biology Open (2019) 8, bio043018. doi:10.1242/bio.043018 METHODS AND TECHNIQUES An instrumented centrifuge for studying mouse locomotion and behaviour under hypergravity Benjamin J. H. Smith* and James R. Usherwood ABSTRACT (Alexander, 1984). Investigating the limitations of inverted Gravity may influence multiple aspects of legged locomotion, from the pendulum models of locomotion may lead to advances in robotics periods of limbs moving as pendulums to the muscle forces required and treatment of gait pathologies, as well as our fundamental to support the body. We present a system for exposing mice to understanding of legged locomotion. hypergravity using a centrifuge and studying their locomotion and The motion of an inverted pendulum can be described using u€ ¼ g u u€ activity during exposure. Centrifuge-induced hypergravity has the the equation L sin , where is angular acceleration, g is θ advantages that it both allows animals to move freely, and it affects gravitational acceleration, L is length, and is angular displacement both body and limbs. The centrifuge can impose two levels of from the equilibrium point; testing the predictions of inverted hypergravity concurrently, using two sets of arms of different lengths, pendulum-based models therefore requires the manipulation of either each carrying a mouse cage outfitted with a force and speed L or g. Differences in L are usually studied by comparing similar measuring exercise wheel and an infrared high-speed camera; both animals of different sizes (Gatesy and Biewener, 1991; Daley and triggered automatically when a mouse begins running on the wheel.
    [Show full text]
  • PHYSICS of ARTIFICIAL GRAVITY Angie Bukley1, William Paloski,2 and Gilles Clément1,3
    Chapter 2 PHYSICS OF ARTIFICIAL GRAVITY Angie Bukley1, William Paloski,2 and Gilles Clément1,3 1 Ohio University, Athens, Ohio, USA 2 NASA Johnson Space Center, Houston, Texas, USA 3 Centre National de la Recherche Scientifique, Toulouse, France This chapter discusses potential technologies for achieving artificial gravity in a space vehicle. We begin with a series of definitions and a general description of the rotational dynamics behind the forces ultimately exerted on the human body during centrifugation, such as gravity level, gravity gradient, and Coriolis force. Human factors considerations and comfort limits associated with a rotating environment are then discussed. Finally, engineering options for designing space vehicles with artificial gravity are presented. Figure 2-01. Artist's concept of one of NASA early (1962) concepts for a manned space station with artificial gravity: a self- inflating 22-m-diameter rotating hexagon. Photo courtesy of NASA. 1 ARTIFICIAL GRAVITY: WHAT IS IT? 1.1 Definition Artificial gravity is defined in this book as the simulation of gravitational forces aboard a space vehicle in free fall (in orbit) or in transit to another planet. Throughout this book, the term artificial gravity is reserved for a spinning spacecraft or a centrifuge within the spacecraft such that a gravity-like force results. One should understand that artificial gravity is not gravity at all. Rather, it is an inertial force that is indistinguishable from normal gravity experience on Earth in terms of its action on any mass. A centrifugal force proportional to the mass that is being accelerated centripetally in a rotating device is experienced rather than a gravitational pull.
    [Show full text]
  • Continuous-Flow Centrifugation to Collect Suspended Sediment for Chemical Analysis
    1 Table 6. Compounds detected in both equipment blank samples and not in corresponding source blank samples or at concentrations greater than two times the corresponding source blank sample concentration. Prepared in cooperation with the National Water Quality Monitoring Council and [Source data: Appendix A, table A1; Conn and Black (2014, table A4); and Conn and others (2015, table A11). CAS Registry Number: Chemical Abstracts Service Washington State Department of(CAS) Ecology Registry Number® (RN) is a registered trademark of the American Chemical Society. CAS recommends the verifi cation of CASRNs through CAS Client ServicesSM. Method: EPA, U.S. Environmental Protection Agency’s SW 846; SIM, select ion monitoring. Unit: µg/kg, microgram per kilogram; ng/kg, nanogram per kilogram. Sample type: River samples were from the Puyallup River, Washington. Q, qualifi er (blank cells indicate an unqualifi ed detection). J, estimated, result between the Continuous-Flow Centrifugationdetection level and reporting level; toNJ, result Collect did not meet all quantitation Suspended criteria (an estimated maxiumum possible concentration is reported in Result column) U, not detected above the reporting level (reported in the Result column); UJ, not detected above the detection level (reported in the Result column). Abbreviations: na, not Sediment for Chemicalapplicable; Analysis PCBs, polychlorinated biphenyls] Sample type Chapter 6 of CAS River River Commercial Commercial Section D, Water Quality Parameter name Registry Method Unit source equipment
    [Show full text]
  • Gas Centrifuge Technology: Proliferation Concerns and International Safeguards Brian D
    Gas Centrifuge Technology: Proliferation Concerns and International Safeguards Brian D. Boyer Los Alamos National Laboratory Trinity Section American Nuclear Society Santa Fe, NM November 7, 2014 Acknowledgment to M. Rosenthal (BNL), J.M. Whitaker (ORNL), H. Wood (UVA), O. Heinonen (Harvard Belfer School), B. Bush (IAEA-Ret.), C. Bathke (LANL) for sources of ideas, information, and knowledge UNCLASSIFIED Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA Enrichment / Proliferation / Safeguards . Enrichment technology – The centrifuge story . Proliferation of technology – Global Networks . IAEA Safeguards – The NPT Bargain Enrichment Proliferation Safeguards U.S. DOE Centrifuges – DOE / Pres. George W. Bush at ORNL B. Boyer and K. Akilimali - IAEA Zippe Centrifuge – Deutsches Museum (Munich) briefed on seized Libyan nuclear Safeguards Verifying Spent Fuel in www.deutsches-museum.de/en/exhibitions/energy/energy-technology/nuclear-energy/ equipment (ORNL) Training in Sweden (Ski-1999) UNCLASSIFIED 2 Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA The Nuclear Fuel Cycle and Proliferation Paths to WMDs IAEA Safeguards On URANIUM Path Weapon Assembly Convert UF6 to U Metal Pre-Safeguards Natural Enriched DIVERSION Material (INFCIRC/153) Uranium Uranium PATH “Open” Cycle WEAPONS PATHS Fuel – Natural Uranium or LEU In closed cycle – MOX Fuel (U and Pu) “Closed” Cycle IAEA Safeguards On PLUTONIUM Path Convert Pu Plutonium Compounds to Pu Metal DIVERSION PATH To Repository
    [Show full text]
  • Basics in Centrifugation - Eppendorf Handling Solutions Page 1 of 5
    Basics in Centrifugation - Eppendorf Handling Solutions Page 1 of 5 Menu • Home • Sample Handling • Centrifugation • Safe Use of Centrifuges • Basics in Centrifugation Basics in Centrifugation • Biosafety • Safe Use of Centrifuges • Centrifugation Applications • This and That • Braking Ramps • Thermal Conductivity • Centrifuge Maintenance • Ergonomics • share • tweet • share • mail Basics in Centrifugation Centrifugation is a technique that helps to separate mixtures by applying centrifugal force. A centrifuge is a device, generally driven by an electric motor, that puts an object, e.g., a rotor, in a rotational movement around a fixed axis. A centrifuge works by using the principle of sedimentation: Under the influence of gravitational force (g-force), substances separate according to their density. Different types of separation are known, including isopycnic, ultrafiltration, density gradient, phase separation, and pelleting. https://handling-solutions.eppendorf.com/sample-handling/centrifugation/safe-use-of-cent... 10/24/2018 Basics in Centrifugation - Eppendorf Handling Solutions Page 2 of 5 Pelleting is the most common application for centrifuges. Here, particles are concentrated as a pellet at the bottom of the centrifuge tube and separated from the remaining solution, called supernatant. During phase separation, chemicals are converted from a matrix or an aqueous medium to a solvent (for additional chemical or molecular biological analysis). In ultrafiltration, macromolecules are purified, separated, and concentrated by using a membrane. Isopycnic centrifugation is carried out using a "self- generating" density gradient established through equilibrium sedimentation. This method concentrates the analysis matches with those of the surrounding solution. Protocols for centrifugation typically specify the relative centrifugal force (rcf) and the degree of acceleration in multiples of g (g-force).
    [Show full text]
  • 404 Sedimentation Handout
    Sedimentation for Analysis and Separation of Macromolecules A ‘centrifugal force’ as experienced by particles in a centrifuge actually reflects the natural tendency of the particle to move in a straight line in the absence of external forces. If we view the experiment in the (fixed) reference frame of the laboratory, we observe that the particle is deflected from a linear trajectory by a centripetal force (directed toward the central axis of the rotor). However, when we consider the motion of the particle with respect to the (rotating) reference frame of the rotor, it appears that at any instant the particle experiences an outward or centrifugal force: Instantaneous Velocity (vtang) Centrifugal Acceleration Centripetal Acceleration As seen in laboratory As seen in (rotating) reference frame reference frame of rotor Ignoring buoyancy effects for the moment, the magnitude of the centrifugal force (which, in the rotating reference frame of the rotor, is as real as any other force) is m ⋅ v2 F = objecttan g =⋅mrω 2 centrif r object [1] where r is the distance from the axis of rotation, vtang is the linear velocity at any instant (in the direction perpendicular to the radial axis) and ω is the angular velocity (in radians sec-1 – note that 1 rpm = 2π///60 rad sec-1). The magnitude of this force can be compared to that of the gravitational force at the earth’s surface: Gm⋅()⋅() m = earth object Fgrav 2 re [2] -8 -1 3 -2 where G is the universal gravitational constant (= 6.67 x 10 g cm sec ) and re and me are the earth’s radius (= 6.37 x 108 cm) and mass (5.976 x 1027 g), respectively.
    [Show full text]
  • Guide to Biotechnology 2008
    guide to biotechnology 2008 research & development health bioethics innovate industrial & environmental food & agriculture biodefense Biotechnology Industry Organization 1201 Maryland Avenue, SW imagine Suite 900 Washington, DC 20024 intellectual property 202.962.9200 (phone) 202.488.6301 (fax) bio.org inform bio.org The Guide to Biotechnology is compiled by the Biotechnology Industry Organization (BIO) Editors Roxanna Guilford-Blake Debbie Strickland Contributors BIO Staff table of Contents Biotechnology: A Collection of Technologies 1 Regenerative Medicine ................................................. 36 What Is Biotechnology? .................................................. 1 Vaccines ....................................................................... 37 Cells and Biological Molecules ........................................ 1 Plant-Made Pharmaceuticals ........................................ 37 Therapeutic Development Overview .............................. 38 Biotechnology Industry Facts 2 Market Capitalization, 1994–2006 .................................. 3 Agricultural Production Applications 41 U.S. Biotech Industry Statistics: 1995–2006 ................... 3 Crop Biotechnology ...................................................... 41 U.S. Public Companies by Region, 2006 ........................ 4 Forest Biotechnology .................................................... 44 Total Financing, 1998–2007 (in billions of U.S. dollars) .... 4 Animal Biotechnology ................................................... 45 Biotech
    [Show full text]
  • Design and Validation of a Compact Radius Centrifuge Artificial Gravity Test Platform
    Design and Validation of a Compact Radius Centrifuge Artificial Gravity Test Platform by Chris Trigg B.S. Environmental Engineering Northwestern University, 2008 M.S. Environmental Engineering Stanford University, 2009 SUBMITTED TO THE DEPARTMENT OF AERONAUTICS AND ASTRONAUTICS IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN AERONAUTICS AND ASTRONAUTICS AT THE MASSACHUSETTS INSTITUTE OF TEHCNOLOGY MAY 2013 ©2013 Massachusetts Institute of Technology All Rights Reserved Signature of Author: ____________________________________________________________________ Department of Aeronautics and Astronautics May 23, 2013 Certified by: __________________________________________________________________________ Prof. Laurence R. Young Apollo Program Professor of Astronautics Professor of Health Sciences and Technology Thesis Supervisor Accepted by: __________________________________________________________________________ Prof. Eytan H. Modiano Professor of Aeronautics and Astronautics Chair, Graduate Program Committee 2 Design and Validation of a Compact Radius Centrifuge Artificial Gravity Test Platform by Chris Trigg Submitted to the Department of Aeronautics and Astronautics on 23 May, 2013 in Partial Fulfillment of the Requirements for the Degree of Master of Science in Aeronautics and Astronautics ABSTRACT Intermittent exposure to artificial gravity on a short radius centrifuge (SRC) with exercise is a promising, comprehensive countermeasure to the cardiovascular and musculoskeletal deconditioning that occurs as a result of prolonged exposure to microgravity. To date, the study of artificial gravity has been done using bedrest and SRC’s with subjects positioned radially with the head at the center of rotation. A recent proposal to put a human centrifuge on the International Space Station (ISS) highlighted the reality that near-term inflight SRC’s will likely be confined to radii shorter than has been typically used in terrestrial analogs.
    [Show full text]
  • ARTIFICIAL GRAVITY RESEARCH to ENABLE HUMAN SPACE EXPLORATION International Academy of Astronautics
    ARTIFICIAL GRAVITY RESEARCH TO ENABLE HUMAN SPACE EXPLORATION International Academy of Astronautics Notice: The cosmic study or position paper that is the subject of this report was approved by the Board of Trustees of the International Academy of Astronautics (IAA). Any opinions, findings, conclusions, or recommendations expressed in this report are those of the authors and do not necessarily reflect the views of the sponsoring or funding organizations. For more information about the International Academy of Astronautics, visit the IAA home page at www.iaaweb.org. Copyright 2009 by the International Academy of Astronautics. All rights reserved. The International Academy of Astronautics (IAA), a non governmental organization recognized by the United Nations, was founded in 1960. The purposes of the IAA are to foster the development of astronautics for peaceful purposes, to recognize individuals who have distinguished themselves in areas related to astronautics, and to provide a program through which the membership can contribute to international endeavors and cooperation in the advancement of aerospace activities. © International Academy of Astronautics (IAA) September 2009 Study on ARTIFICIAL GRAVITY RESEARCH TO ENABLE HUMAN SPACE EXPLORATION Edited by Laurence Young, Kazuyoshi Yajima and William Paloski Printing of this Study was sponsored by: DLR Institute of Aerospace Medicine, Cologne, Germany Linder Hoehe D-51147 Cologne, Germany www.dlr.de/me International Academy of Astronautics 6 rue Galilée, BP 1268-16, 75766 Paris Cedex 16,
    [Show full text]
  • Uranium Enrichment Plant Characteristics—A Training Manual for the IAEA
    ORNL/TM-2019/1311 ISPO-553 Uranium Enrichment Plant Characteristics—A Training Manual for the IAEA J. M. Whitaker October 2019 Approved for public release. Distribution is unlimited. DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via US Department of Energy (DOE) SciTech Connect. Website www.osti.gov Reports produced before January 1, 1996, may be purchased by members of the public from the following source: National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone 703-605-6000 (1-800-553-6847) TDD 703-487-4639 Fax 703-605-6900 E-mail [email protected] Website http://classic.ntis.gov/ Reports are available to DOE employees, DOE contractors, Energy Technology Data Exchange representatives, and International Nuclear Information System representatives from the following source: Office of Scientific and Technical Information PO Box 62 Oak Ridge, TN 37831 Telephone 865-576-8401 Fax 865-576-5728 E-mail [email protected] Website http://www.osti.gov/contact.html This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof.
    [Show full text]
  • Economic Perspective for Uranium Enrichment
    SIDEBAR 1: Economic Perspective for Uranium Enrichment he future demand for enriched are the customary measure of the effort uranium to fuel nuclear power required to produce, from a feed material plants is uncertain, Estimates of with a fried concentration of the desired T this demand depend on assump- isotope, a specified amount of product en- tions concerning projections of total electric riched to a specified concentration and tails, power demand, financial considerations, and or wastes, depleted to a specified concentra- government policies. The U.S. Department tion. For example, from feed material with a of Energy recently estimated that between uranium-235 concentration of 0.7 per cent now and the end of this century the gener- (the naturally occurring concentration), ation of nuclear power, and hence the need production of a kilogram of uranium enrich- for enriched uranium, will increase by a ed to about 3 per cent (the concentration factor of 2 to 3 both here and abroad. Sale of suitable for light-water reactor fuel) with tails enriched uranium to satisfy this increased depleted to 0.2 per cent requires about 4.3 demand can represent an important source SWU. of revenue for the United States, Through Gaseous diffusion is based on the greater fiscal year 1980 our cumulative revenues rate of diffusion through a porous barrier of from such sales amounted to over 7 billion the lighter component of a compressed dollars, and until recently foreign sales ac- gaseous mixture. For uranium enrichment counted for a major portion of this revenue. the gaseous mixture consists of uranium The sole source of enriched uranium until hexafluoride molecules containing 23$ 1974, the United States now supplies only uranium-235 ( UF6) or uranium-238 238 about 30 per cent of foreign demand, New ( UF6).
    [Show full text]
  • Biol1414: Introduction to Biotechnology I
    BIOL1414: INTRODUCTION TO BIOTECHNOLOGY I Exercise Workbook & Lab Guide Dr. Jack O’Grady 2019-2020 Acknowledgments This manual could not have been possible without the dedication of the faculty, staff, and students of Austin Community College’s Biotechnology Program, in addition to our valuable educational partners, and numerous grants. Some lab material provided by the following educational partners: Bio-Link, Bio-Rad, Dolan Learning Center, and Edvotek. A special thank you to our amazing lab technicians Evelyn Apple and Jeremy Garza. Copyright This lab manual was created by Jack O’Grady. This manual can be openly shared and printed. Please send comments, derivatives, or corrections to [email protected]. The content in this lab manual is compiled from various open copyright, public domain, and commercial sources, which are all cited within, and maybe copyright protected. Funding This material was developed with the assistance of the following grants: 1. Sabbatical Funding (2018-19), Austin Community College 2. Bio-link award number 9850325 (2014-2016), 1400721 (2013), 0903317 (2010) 3. Texas Education Agency (2004-2015) 4. National Science Foundation, Award Number 0053296 (2004-2006) Table of Contents LAB UNIT 1: INTRODUCTION TO BIOL1414 ..................................................................................... 1 LAB UNIT 2: ESSENTIAL TOOLS IN THE BIOTECHNOLOGY LABORATORY ....................................... 19 LAB UNIT 3: PREPARING SOLUTIONS ............................................................................................
    [Show full text]