USW-A1 Specifications USW-A1 Accessories
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
FAQ Abouth The
FAQ about the NATO Codification System Revised Aug 2017 FAQ - Frequently Asked Questions 1. What is a NATO Stock Number (NSN)? 2. How do I get my items codified? 3. Who is the point of contact for National NCBs? 4. What do I do if I need an NATO Stock Number (NSN) as a matter of urgency? 5. How long will it take to get a NATO Stock Number? 6. Where can we get information on the NATO MCRL? 7. Who uses an Item of Supply? 8 Can you provide the technical information of an Item of Supply? 9. How can I find out the NSNs registered against my Company? 10. How can you tell who manufacturers the Item of Supply from a reference listed on the NSN? 11. Whom should I contact if the information on file is incorrect? 12. How do I add the United Kingdom, for example, as a user to a foreign NSN (to a United States NSN, for example)? 13. How do I add the reference number of a new supplier I have discovered, to an existing NSN? 14. Why would or should I go to the trouble of doing either of the last 2 actions above? 15. Why do you need all the technical source data for the item? 16. Who’s in charge of the NCS? 17. Can non-NATO countries use the NCS? 18. What is the role of contractors in codification? 1. What is a NATO Stock Number (NSN)? When it is established that an Item of Supply is unique, its identity is fixed through the assignment of its own NATO Stock Number (NSN). -
NATO Codification System – NCS the Global Language of Logistics
NATO MASTER CATALOGUE OF REFERENCES NMCRL ANNUAL SUBSCRIPTION PRICES FOR LOGISTICS ON WEB (NMCRL-WEB) Pricing table for year 2019 (revisable annually) : Data Contents: Licenses 17.3 million active NATO Stock Numbers (NSNs) up to 5 up to 20 38.1 million Manufacturers/Vendor Reference (Part) Numbers Single users users 2.8 million active Manufacturers and Vendors (NCAGE codes, names and addresses) NMCRL - WEB 880 € 1800 € 3480 € 29.3 million User Registrations 12.1 million NSNs with TECHNICAL CHARACTERISTICS NMCRL - OFFLINE 1030 € 2030 € 4050 € 3.9 million NSNs with PACKAGING DATA 15.5 million NSNs with CUSTOM CODES * NMCRL - PACK 1160 € 2310 € 4520 € 13.4 million NSNs with CPV CODES * NMCRL-PACK = WEB access + 6 OFFLINE application updates Search Modules: (downloadable) per yearly subscription <ITEM of SUPPLY> : Search on codification data (NSNs) <CHARACTERISTICS> : Search on Technical Characteristics NMCRL is for authorized use only. Copy and/or further dissemina- tion with or without remuneration in whole or in part is not per- <NCAGE> : Search on complete Manufacturers’ and Ven- Discover NMCRL-WEB Lite : mitted. Copyright AC/135 - All rights reserved. dors’ data records Limited FREE Access to NMCRL WEB for one <BATCH> : Mass data extraction of grouped codification data Month Maintenance Module: MORE INFORMATION & SUBSCRIPTIONS ? Become familiar with NMCRL WEB <NSN-OMT> : Online Maintenance Tool (request tool for data modification) Request updates of your own part numbers Upload item images FEATURES & BENEFITS OF NMCRL-WEB -
(12) Patent Application Publication (10) Pub. No.: US 2017/0122699 A1 Badia (43) Pub
US 2017.0122699A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2017/0122699 A1 Badia (43) Pub. Date: May 4, 2017 (54) REMOVABLE AND RETRACTABLE (52) U.S. Cl. FIREARM BAYONET SYSTEM CPC ............ F4 IC 27/18 (2013.01); F41G II/003 (2013.01) (71) Applicant: Jace Alric Badia, Augusta, GA (US) (57) ABSTRACT (72) Inventor: Jace Alric Badia, Augusta, GA (US) Example embodiments of a removable and retractable fire arm bayonet system are provided that include a blade and a (21) Appl. No.: 14/929,626 mount. In typical embodiments, the blade is secured within the mount and the mount provides at least two secured (22) Filed: Nov. 2, 2015 positions. The Secured positions include a retracted position wherein the blade is secured at least partially within the mount and an extended position wherein the blade is secured Publication Classification to the mount with at least a portion of the blade extending (51) Int. C. beyond the mount. In typical embodiments, the mount also F4 IC 27/18 (2006.01) includes one or more removable attachments to secure the F4IG II/00 (2006.01) mount to a rail system of a firearm. Mount 108 Front Edge 82 Retracted PostOf 42 Extended Position 4. ensioner 8 Retractabie Blade Ocking Kot 34 Bayonetv System Patent Application Publication May 4, 2017. Sheet 1 of 7 US 2017/O122699 A1 \ Firean Rai: System 104 Extended Position 4. Retracted otsit 03 A 82 Positiof 42 Supplemental Rail Removable System 70 Attachert 2 siagazine 4. t; agazine:S Bayonet System 32 FIG. -
Scope Mounts to Meet His Own Exacting Standards
Osuma Catalogue 2018 The history of Finnish based Osuma goes back to the manufacturing technologies, and high grade materials. early 90’s, when the company owner, a passionate Our portfolio provides products for most popular rifles hunter and benchrest shooter, developed the first set and scopes on the market, as well as highly specific of scope mounts to meet his own exacting standards. solutions. The company has passed from father to son, but the very The new and improved line of suppressors has also same scope mounts are still part of Osuma’s product become a big part of our business. Osuma suppressors portfolio, which now includes more than 150 different combine excellent recoil reduction, ample sound products. The same ideology lies behind every product suppression, light weight, and ergonomic design. We we’ve designed and manufactured. We learn from our also cannot help mentioning our best seller: the Trigger own hunting and shooting experience, and listen to the Widener. Although we do say so ourselves, the Osuma needs of other hunters. This helps us to provide new Trigger Widener is the best pound-for-pound shooting innovations, and improve existing solutions for our fellow accessory in the world! hunters and shooters. All Osuma products are designed and manufactured Our main focus is scope mounting, which is often in Finland, to guarantee the highest possible quality the Achilles’ heel of a rifle shooter’s equipment. We standards. manufacture high quality mounts that are both reliable and easy to use. We’ve achieved this through our Jukka Olkkonen, long experience in product development, the latest CEO, Osuma Products Scope Mounts Osuma Scope Mounts Dimensions: tube diameter/rail/free space/colour This is where it all started more than 20 years ago. -
APC300 APC300 APC300 Carbine Accessories
02 16 APC300 APC300 APC300 Carbine Accessories Item Number BT-36054 BT-36055 The APC300 comes complete with a set of foldable sights, an interchangeable 1 or 2 point carrying sling, two 30 round polymer APC300 - ADVANCED POLICE CARBINE magazines, removable open sights, a cleaning kit, an instruction manual and a polymer carrying case. Caliber .300 Whisper / .300 Whisper/ .300 AAC Blackout .300 AAC Blackout .300 WHISPER / .300 AAC BLACKOUT Operation short stroke gas short stroke gas piston, rotary bolt piston, rotary bolt The most advanced and versatile carbine and cartridge combination for today´s Law Enfor- Magazines two 30 round two 30 round cement, this includes SWAT/special interventions as well as special military operations. polymer magazines polymer magazines included included Barrel Length 280 mm 280 mm APC300 Carbine Twist Rate 1 in 8” 1 in 8” Weight Empty 3,8 kg 3,8 kg 1 2 3 Length Open 75,6 – 81,6 cm 75,6 – 81,6 cm Length Folded 58,2 cm 58,2 cm 1. Stocks – The APC300 comes with a folda- 2. BT Weapon Mounted Light – This state of the 3. Brass Catcher – This accessory is an ab- Stock Pull 30,8 – 36,8 cm 30,8 – 36,8 cm ble and length adjustable stock. As an op- art tactical illuminator was designed from solute must when working in, on or around Rate of Fire 600 rpm Semi automatic only tion a clamp-on check rest, to add an extra the very beginning following B&T specifica- vehicles, ships and aircraft. The contain- 12 mm in case special optics (e.g. -
Authorized Abbreviations, Brevity Codes, and Acronyms
Army Regulation 310–50 Military Publications Authorized Abbreviations, Brevity Codes, and Acronyms Headquarters Department of the Army Washington, DC 15 November 1985 Unclassified USAPA EPS - * FORMAL * TF 2.45 05-21-98 07:23:12 PN 1 FILE: r130.fil SUMMARY of CHANGE AR 310–50 Authorized Abbreviations, Brevity Codes, and Acronyms This revision-- o Contains new and revised abbreviations, brevity codes , and acronyms. o Incorporates chapter 4, sections I and II of the previous regulation into chapters 2 and 3. o Redesignates chapter 5 of the previous regulation as chapter 4. USAPA EPS - * FORMAL * TF 2.45 05-21-98 07:23:13 PN 2 FILE: r130.fil Headquarters Army Regulation 310–50 Department of the Army Washington, DC 15 November 1985 Effective 15 November 1985 Military Publications Authorized Abbreviations, Brevity Codes, and Acronyms has been made to highlight changes from the a p p r o v a l f r o m H Q D A ( D A A G – A M S – P ) , earlier regulation dated 15February 1984. ALEX, VA 22331–0301. Summary. This regulation governs Depart- m e n t o f t h e A r m y a b b r e v i a t i o n s , b r e v i t y Interim changes. Interim changes to this codes, and acronyms. regulation are not official unless they are au- thenticated by The Adjutant General. Users Applicability. This regulation applies to el- will destroy interim changes on their expira- ements of the Active Army, Army National Guard, and U.S. -
The M14 Rifle, Officially the United States Rifle, 7.62 Mm, M14, Is an American Selective Fire Automatic Rifle That Fires 7.62×51Mm NATO (.308 In) Ammunition
The M14 rifle, officially the United States Rifle, 7.62 mm, M14, is an American selective fire automatic rifle that fires 7.62×51mm NATO (.308 in) ammunition. It gradually replaced the M1 Garand rifle in U.S. Army service by 1961 and in U.S. Marine Corps service by 1965. It was the standard issue infantry rifle for U.S. military personnel in the contiguous United States, Europe, and South Korea from 1959 until the M16 rifle began replacing it in 1964. The M14 was used for U.S. Army, Navy and Marine Corps basic and advanced individual training (AIT) from the mid-1960s to the early 1970s. The M14 was the last American battle rifle issued in quantity to U.S. military personnel. The rifle remains in limited service in all branches of the U.S. military as an accurized competition weapon, a ceremonial weapon by honor guards, color guards, drill teams, and ceremonial guards, and sniper rifle/designated marksman rifle. Civilians models in semi- automatic are used for hunting, plinking, target shooting and competitions including metallic silhouette, 3 gun and metal challenge. The M14 is the basis for the M21 and M25 sniper rifles which were largely replaced by the M24 Sniper Weapon System. A new variant of the M14, the Mk 14 Enhanced Battle Rifle has been in service since 2002. History Early development The M14 was developed from a long line of experimental weapons based upon the M1 rifle. Although the M1 was among the most advanced infantry rifles of the late 1930s, it was not an ideal weapon. -
Catalogue-Brochure-PDM.Pdf
PGM PRECISION PGM PRECISION Fondée en 1991 et spécialisée dans la conception et la Founded in 1991 and specialized in the development fabrication des fusils de haute précision «Ultima ratio», and manufacturing of high precision rifles «Ultima «Hécate 2», «Mini Hécate 2», «PGM338» et «Ludis», ratio», «Hécate 2», «Mini Hécate 2», «PGM338» and PGM Précision est fournisseur officiel des Forces Armées «Ludis», PGM Précision is the official riffle supplier Françaises et de plusieurs unités d’élite françaises et of the French Armed Forces, as well as several other étrangères de près de 45 pays. French and foreign elite military units spanning nearly 45 countries. Mondialement connues et reconnues pour leur robustesse et leur précision, nos armes sont prévues Our rifles are known and recognized worldwide for their dès leur conception pour un usage tactique, à la fois solidity and accuracy, they are designed for tactical militaire et police mais aussi pour le tir sportif. use, both military and police but also recreational Leur modularité permet une customisation avancée afin shooting. Their modularity allows advanced d’atteindre des performances encore plus poussées customization in order to achieve top performance dans toutes les conditions, même les plus rudes. under even the harshest of conditions. Grâce à son expertise et ses relations privilégiées avec Thanks to PGM’s expertise and valuable partnerships, les meilleurs partenaires, PGM vous propose une solution it is able to offer a ready made solution with weapon clé en main allant de l’arme jusqu’à la formation des use ranging from the training of users to gunsmiths utilisateurs et des armuriers en passant par le choix des through the choice of tactical accessories (shooting accessoires tactiques (lunettes de tir, réducteurs de glasses, sound reducers, ammunition...). -
Sniper Rifle .308 Win/.338 Lapua Magnum
09 16 APR308 Technical APR308 APR338 Accessories Specifications The APR comes complete with a folding stock, a buttspike, a muzzle brake, an inclined NAR/Picatinny top rail, an UIT-Rail, a magazine, APR 308/338 – SNIPER RIFLE Caliber .308 Win .338 LM a suppressor, a bipod, a cleaning and a tool kit. (7.62x51 NATO) (8.6x70) .308 WIN/.338 LAPUA MAGNUM Twist Rate 1:11“ 1:11“ Barrel Length 610 mm (24“)* 685 mm (27“) Exact precision when it counts the most. That’s the mission of the B&T APR. It was designed to meet the demanding Sight radius 727 mm 822 mm requirements of military and law enforcement professionals worldwide, under all types of conditions, from the scorching Overall Length desert to the Arctic cold. Stock extended 1125 -1200 mm 1236 – 1311 mm APR338 Stock folded 906 mm 1002 mm Width (w/o bolt) Stock extended 50 mm 50 mm 1 2 3 Stock folded 86 mm 90 mm The APR comes standard with a one An optional three chamber muzzle break Depending on customer desires, the APR be Weight (weapon only) 6.1 kg 7.9 kg chamber muzzle brake that reduces is available. It passes less recoil on to the can delivered in one of three different trans- Magazine Capacity 10 rds, detachable the recoil felt by the operator. The in- shooter, which is beneficial if many rounds port cases. A hard case for aircraft travel, Trigger Pull 1.5 kg – 2.5 kg geniously designed suppressor can are fired subsequently. For this muzzle break a hard case for normal transport or a soft be mounted on directly on the muzzle brake a special lightweight suppressor with QD- case that can be carried like a backpack. -
Versa-Pod® Is Quality and Innovation QUALITY Means Superior Materials Are Used Throughout Quality Means That There Are 18 TIG Welds in Every Versa-Pod Bipod
Versa-Pod® target=_blank http://www.acp-waffen.de/frameset.php?site_id=1 Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com Versa-Pod® is Quality and Innovation QUALITY means superior materials are used throughout Quality means that there are 18 TIG welds in every Versa-Pod bipod. Un- like our competition, we don't simply make idle claims about being durable - we give you proof. The proof is in the way we build our bipods. target=_blank 304 STAINLESS STEEL - Solid There are 5 welds on each lower leg Each leg section is press-fit 304 stainless castings are used band, ensuring it will never separate into the upper leg housing and at critical stress points like the from the bipod leg then permanently secured by 4 knuckle joint. TIG welds Our competitors use fabricated sheetmetal construction. SOLID LEGS - POSITIVE LOCKING - On our bipods, the legs are Our designs all use positive machined from solid metal locking notches. The load that (aluminum or steel), not the leg is able to sustain is 15 hollow, bent sheetmetal times greater than that of de- like on our competitor's signs which use a friction-type bipods. You won't locking mechanism. get that "springy" feel when you take your shot. SUPERIOR DIE CASTINGS - Compare and see the difference Aluminum alloy parts are yourself - when our competitors die-cast of AL14130 using make bipods which they claim to pressures upwards of 30,000 have "positive locking" legs, the PSI. This ensures parts that SOLID STEEL LATCHES - legs have radial grooves which are essentially porosity-free The locking latches are wire-EDM cut are lathe turned, simple and yet lightweight. -
Instructions for Use Betriebsanleitung
INSTRUCTIONS FOR USE BETRIEBSANLEITUNG STEYR SSG 08 A1 Important Read before use! Wichtig Vor Gebrauch lesen! Fig. 1a STEYR SSG 08 A1 with 508 mm / 20” barrel, color RAL 9011 Abb. 1a STEYR SSG 08 A1 mit 508 mm / 20” Lauf, Farbe RAL 9011 Fig. 1b STEYR SSG 08 A1 stock folded Abb. 1b STEYR SSG 08 A1 Schaft geklappt Edition EU 03 1-BA-6011 STEYR ARMS GmbH Ramingtal 46 4442 Kleinraming / Austria [email protected] www.steyr-arms.com WARNING! Text passages after the word „WARNING!“ contain informations which ENGLISH have to be followed to save the shooter from potential damage. CAUTION! Text passages after the word „CAUTION!“ contain informations which have to be followed to avoid potential damage to the weapon. Intended Use The STEYR ARMS magazine fed repeating rifle is intended to be used solely for hunting and sport shooting purposes according to the re- spective national regulations. Any other use or any exceeding use is regarded to be a use not intended. The adherence of the instructions regarding safety, operation, maintenance and care given in the users manual are part of the intended use. The user is solely liable for any damages resulting from use not intended. This applies as well for any arbitrary and inappropriate changes to the gun. Before unpacking and using the rifle read this Operator’s manual; it will warn the owner/user against possible dangers that could be caused by misuse, which might lead to accidents. This manual will familiarize you with the rifle’s function and safe handling character- istics. -
The NATO Codification System: Improving Data Quality Through ISO Standards 22745 and 8000
DEFENSE LOGISTICS AGENCY AMERICA’S COMBAT LOGISTICS SUPPORT AGENCY The NATO Codification System: Improving Data Quality through ISO Standards 22745 and 8000 Steven Arnett Chief, U.S. National Codification Bureau Tel: 269-961-5916 Email: [email protected] July 14, 2010 WARFIGHTER SUPPORT ENHANCEMENT STEWARDSHIP EXCELLENCE WORKFORCE DEVELOPMENT 1 Overview • The Defense Logistics Information Service (DLIS) • The NATO Codification System (NCS) • Basics of ISO standards 22745 and 8000 • Implementation of ISO standards 22745 and 8000 • Summary • Useful international Web sites 2 The Defense Logistics Information Service 3 DLIS • Mission: To provide interoperable, integrated, quality logistics data, and enterprise IT solutions for joint warfighters, the Military Services, the Defense Department, other Federal agencies and international partners in order to optimize the effectiveness and efficiency of the DOD Supply Chain. 4 Our Customers Combatant Commanders… The Military Services… Other Government Contractors Agencies NATO International 5 The NATO Codification System 6 Why the NCS Was Created ONE ITEM OF SUPPLY SINGLE MANAGER SINGLE NSN DLA NSN 1 Each military service uses their own logistics In The Days of WWII “language” DLA Army Marine Corps Navy Air Force NSN 1 NSN 2 NSN 3 NSN 4 NSN 5 Potential for: - Multiple NSNs, based on service and weapon system NATO - Multiple buying activities NSN 6 NSN 8 - Multiple corporate contracts - Loss of Interoperability/Asset Visibility NSN ? NSN 7 7 NCS History e-Commerce 2009 eOTD / ISO 2002 BASELOG