DOCSLIB.ORG

2020 E-Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2020 E-Catalog 2020 E-catalog Energy Harness Corporation (Corporate) Energy Harness Corporation (Midwest) 71 Mid Cape Terrace 10815 Deandra Dr. www.energyharness.com Cape Coral, FL 33991 Zionsville, IN 46077 [email protected] 1-239-790-3300 (Sales) 1-317-999-5561 (Midwest Sales) LED Street Light Fixtures LED Street Light Fixtures Specifications - IP66 rated - Lifespan: > 50,000 hours Energy Harness® LED Street Lights have an - 0-10V dimmable - Operating ambient temperature: -40°F-122°F excellent optical design, optimal cooling fin - Efficacy: > 135lm/w - EPA: 80W = 1.26 | 150W = 1.39 | 300W = 1.80 - CRI > 80 - CCT: 3000K, 4000K, 5000K, 5700K design, even light distribution, and a hinged door - PF > .9 - Distribution Types: I, II, III, IV, V for easy maintenance access. This product is - Input Voltage: 120-277V or 277V-480V great for roadways, residential areas, parking lots, and much more. With its unmatched lighting Accessories performance and long lifespan, this fixture is sure to provide great light for years to come. Wireless Controls Motion Sensor (MS) EHW-SY-PHOTO-CONTROL-277 Surge Protection Device Round Pole Mounting Accessory EHA-SURGE-20kV-277V EHA-ADAPT-SQ-POLE-SIDE-TENON EHA-SURGE-20kV-480V Features Glare Shield (GS) Square Pole Mounting Accessory - Field Serviceable LED Modules 1, 2, or 3 sided EHA-ADAPT-RD-POLE-SIDE-TENON - Field Serviceable Power Supply *Field Installed - NEMA 7-pin twist lock photocell socket - Shorting cap included - Toolless hinged door for maintenance Included Mounting Feature - Adjustable mounting included (receives on 2-3/8” tenon) - Terminal block inside for safe power connection - Power wire (3ft) included for easy installation - Universal and high voltage models available Applications - Roadways - Residential Areas - Parking Lots - Airports - Parks - High Security Areas Back to top Back to top LED Street Light Fixtures LED Street Light Fixtures Light Distribution Ordering Guide Type I Photometric Type II Photometric Type III Photometric Example Model Number: EHF-ST5-3-30057K-480V-D010-BK-MS EHF-ST2 = 80W / 12447lm - 12683lm Product Series EHF-ST3 = 150W / 22601lm - 22953lm EHF-ST5 = 300W / 43308lm - 44688lm 1 = Type I 4 =Type IV Light Distribution 2 = Type II 5 = Type V Type IV Photometric Type V Photometric 3 = Type III (standard) 30K = 3000K 50K = 5000K CCT 40K = 4000K 57K = 5700K (standard) Input Voltage 277V = 120-277V 480V = 277-480V Dimming D010 = 0-10V dimmable Dimensions (mm) Fixture Color BK = Black Powder Coat GY = Grey Powder Coat BR = Bronze WH = White Accessories MS = Motion Sensor GS = Glare Shield Model Number: EHF- ST ____ - ____ - ____ ____ k - ____ V - D010 - Project Name: Date: Specified By: 80W 150W 300W Back to top Back to top LEDLED Area Area Post Post Top Top V2 V2 LED Area Post Top V2 Specifications Energy Harness® LED Area Lights were -CRI > 70 -1-10V Dimmable developed to modernize traditional post top -Distribution Type: IV & V (V standard) -Lifespan > 50000 hrs -Power Factor > 0.995 -EPA Rating 0.6 lighting. With its contemporary appearance -Cast Aluminum Housing -Working Temp: - 40˚ F - 122˚ F and unique design, these state of the art lights -IP65 Rated -Inventronics Power Supply provide 360° light distribution that is sure to -Replaces 150W | 400W HID -Efficacy: 130lm/W brighten any location. The micro-lens system delivers visual comfort by providing a wider Accessories & Mounting Options smoother and more uniform light output. These LED Area light fixtures require no Surge Protection Device Standard Post Top (Option 1 - ballasts, bulbs, or maintenance for their entire EHA-SURGE-20kV-277V Series leave blank on model number) lifespan. Wireless Controls Side Entry Mounting- receives EHW-SY-PHOTO-CONTROL-277 on 2-3/8" tenon (Option 2) Center Pole Post Top Mounting Motion Sensor (MS) receives on 2-3/8" tenon (Option 3) EXAMPLE MODEL NUMBER: EHF-POST-5-7557K-277-PC-GY-MS LED Area Post Top MODEL NUMBER AVERAGE BEAM ANGLE(50%):145.2 DEG TYPE IV Product Series EHF-POST Distribution Type 4 = Type IV | 5 = Type V (standard) Wattage 75 = 75W (9750lm) | 120 = 120W (15600lm) Applications Color CCT 30K = 3000K | 57K =5700K Input Voltage (AC) 277 = 120-277 | 480 = 277-480 -Parks -Condos -Walkways -Apartments Twist-Lock Photocell Receptacle PC = NEMA 7-pin recptacle -Parking lots -Schools Fixture Color GY = Grey | BK = Black Motion Sensor Accesory MS = factory installed Alternate Mountaing Options SE = Side Entry | CP = Center Pole Back to top Back to top 202004DF LED Retrofit Kit LED Retrofit Kit Specifications Energy Harness® LED Retrofit Kits are designed -CRI > 80 -Working Temp: -4° - 113°F to replace existing Metal Halide and High Pressure Sodium lighting with energy saving and long lasting -Beam angle > 120˚ -Efficacy: 152lm +/- 5lm LED technology. Only the internal lighting components of a fixture are replaced, saving additional waste and -Power Factor > 0.9 -0-10V Dimmable upon request expenses by reusing the existing fixtures. Energy Harness® LED Retrofit Kits utilize industry-leading COB -In-fixture use only -Aluminum/ steel housing technology to provide high quality light output. With the kit’s durable construction, specially designed heatsink, active cooling technology, efficient heat dissipation, and Product Replacements built in surge protection, these lights have proved to last throughout the years. The versatile mounting options allow the user to mount into almost any fixture! Kit: 60W 90W 90W EHC Part Number EHK-06050K-120-277V EHK-09050K-120-277V EHK-09050K-200-528V Replacement 150-180W 250-400W 250-400W Wattage 60W 90W 90W Lumens 9120lm 13680lm 13680lm SIZE (L x W) 7” x 4.25” 7” x 4.25” 7” x 4.25” Voltage 100-277VAC 100-277VAC 200-528VAC BaseKit: 150WE26 Direct150W A/C 300WE26 300W Applications EHC Part Number EHK058-15050K-120-277V EHK058-15050K-200-528V EHK058-30050K-120-277V EHK058-30050K-200-528V Replacement 400-600W 400-600W 600-1000W 600-1000W -Parking lots -Street lights Wattage 150W 150W 300W 300W -Warehouses -More! Lumens 21900lm 21900lm 43800lm 43800lm -Wallpacks Size (L x W) 7” x 4.25” 7” x 4.25” 7” x 8.5” 7” x 8.5” Voltage 100-277VAC 200-528VAC 100-277VAC 200-528VAC Back to top Back to top LED Flood Lights LED Flood Lights Specifications Energy Harness® LED Flood light fixtures are designed to replace metal halide flood -CRI > 75 -Working Temp: -22°F - 140°F light fixtures with clean bright light for secure illumination. These fixtures have an excellent -Beam angle > 130˚ -5 year warranty optical design, optimal cooling heatsink, even light distribution, and great heat dissipation for -Power Factor > 0.9 -10W, 20W,40W includes mounting knuckle longevity. Give your fixtures a modern look while upgrading your light output, all while reducing -IP65 rated -Phillips SMD 3030 LEDs your energy cost! -Diecast aluminum housing -Lifespan > 50,000hrs -Adjustable mounting bracket EHF-FLOOD-5050K-277 Replacement : 15-40W 40-75W 75-125W 100-200W 250-400W EHC Part Number EHF-FL-1050K-277-KN EHF-FL-WP-2041K-277-KN EHF-FL-WP-4041K-277-KN EHF-FLOOD-5050K-277 EHF-FLOOD-10050K-277 DLC Number N/A N/A N/A PPJPS1YUU PCDYVPS5R Wattage 10W 20W 40W 50W 100W Lumens 1500lm 2310lm 4100lm 5000lm 10000lm Efficacy 150lm/w 115lm/w 102.5lm/w 100lm/w 100lm/w Size (L” x W” x H”) 6.13” x 5.38” x 1.5” 7.88” x 6.63” x 10.63” 7.88” x 6.63” x 10.63” 10.5” x 9” x 2” 10.5” x 10” x 6.5” Color (CCT) 5000K 4100K 4100K 5000K 5000K Voltage 100-277VAC 100-277VAC 120-277VAC 100-277V (480V optional) 100-277V (480V optional) Replacement : 450-600W 650-800W EHC Part Number EHF-FLOOD-15050K EHF-FLOOD-20050K DLC Number P6VGZPDG6 PVUJAV7AW Wattage 150W 200W Applications Lumens 15000lm 20000lm Efficacy 100lm/w 100lm/w Size (L” x W” x H”) 10.5” x 10” x 6.5” 15.5” x 12” x 9” -Parking lots -High security areas Color (CCT) 5000K 5000K -Flag lighting -Sidewalks Voltage 100-277V (480V optional) 100-277V (480V optional) -Sign lighting -Monuments Back to top Back to top LED Tri-Proof Fixtures LED Tri-Proof Fixtures Specifications -CRI > 80 -Lifespan > 50,000hrs Energy Harness® LED Tri-Proof lights are designed to replace traditional vapor proof -Beam angle > 120˚ -Isolated internal driver fixtures. These LED light fixtures are a great replacement for traditional walk-in -IP66 rated (not for submersion) -Junction box mounting option available cooler and freezer lighting and outdoor (power feed through back) lighting. With easy installation and no -Power factor > .95 maintenance, you can reduce your costs -Aluminum / plastic housing as well as save energy. -5 year warranty -Frosted cover -Non-dimmable -Versatile mounting option available (power feed through side) Accessories -Mounting Hardware -Power Cord -Connector Cord LED Tri-Proof: 2’ 4’ EHC Part Number EHI-TRI24-3050K-277 EHI-TRI48-6050K-277 Replacement 60-75W 120-175W Wattage 30W 60W Applications Lumens 2700lm 5600lm Efficacy 90lm/w 93lm/w -Ceilings -Canopies Size (L” x W” x H”) 24.7” x 3.5” x 2.5” 47.2” x 3.5” x 2.5” -Pavillions -Freezers Color (CCT) 5000K 5000K -Parking Garages -More! Voltage 100-277VAC 100-277VAC Back to top Back to top LED Wall Pack Fixture LED Wall Pack Fixture Specifications Energy Harness® LED Wall Pack fixtures are a modern solution for upgrading your outdoor -CRI > 75 -IP65 rated security lighting. These LED wall packs are great for replacing existing fixtures or adding extra light -Beam angle > 120˚ -100-277VAC where it is needed. With a removable bracket that mounts to an junction box, these fixtures are -Power Factor > 0.9 -Lifespan > 50,000hrs designed for quick and easy installation. With reduced energy usage compared to traditional -Total Harmonic Distortion 13.4% -Phillips 3030 LEDs lighting and zero maintenance needed, these fixtures save time and money! Accessories EHA-SURGE-20kV-277V-SERIES LED Wall Pack 80W 150W EHC Part Number EHF-WP-8050K-277 EHF-WP-15050K-277 Replacement 150-300W 400-550W Wattage 80W 150W Applications Lumens 9600lm 18000lm -Doorways -Parking garages Efficacy 120lm/w 120lm/w -Walkways -Stairwells Size (L” x W” x H”) 15” x 8” x 9” 17” x 10” x 10” -Parking lots -More Color (CCT) 5000K 5000K Voltage (AC) 100-277VAC 100-277VAC DLC PSXWXSNP N/A Back to top Back to top LED 360˚ Corn Bulbs LED 360˚ Corn Bulbs EHC LED 360° Bulbs provide 360° distribution Specifications while dispersing clean and even light.
Load more

Recommended publications
  • Street Lighting Catalogue
    STREET LIGHTING CATALOGUE 2 3 CONTENTS About FortisAlberta .............................................. 2 Overview ................................................................ 3 Guidelines .............................................................. 3 Bug Rating .............................................................. 4 Typical Lighting Arrangements .......................... 4 Road and Pedestrian Classifications ................. 5 LED Streetlight Information ................................ 6 Streetlight Standard Change .............................. 6 LED Conversion Option ....................................... 7 Streetlight Repairs ................................................ 7 Additional Information ........................................ 7 Key Considerations .............................................. 8 Cobra Head ............................................................ 10 Post Top.................................................................. 11 Pendant .................................................................. 12 Galleon ................................................................... 13 Domus .................................................................... 14 Traditionaire ........................................................... 15 Contemporary Coach .......................................... 16 Acorn ....................................................................... 17 Flood Light ............................................................. 18 Yard Light ..............................................................
    [Show full text]
  • Innovative, Energy-Efficient Lighting for New York State Roadways
    Innovative, Energy-Efficient Lighting for New York State Roadways: Opportunities for Incorporating Mesopic Visibility Considerations Into Roadway Lighting Practice Final Report Prepared By: John D. Bullough and Mark S. Rea Lighting Research Center Rensselaer Polytechnic Institute Prepared For: New York State Energy Research and Development Authority New York State Department of Transportation April 2008 TABLE OF CONTENTS Abstract ............................................................................................................................ii Acknowledgments ............................................................................................................ii Introduction ..................................................................................................................... 1 Background ..................................................................................................................... 3 Review of NYS Lighting Policies and Standards ............................................................. 5 Survey of Transportation Officials ................................................................................... 8 Field Measurements of NYS Roadway Lighting Installations ........................................ 10 Human Factors Analyses .............................................................................................. 21 Economic and Energy Analyses.................................................................................... 25 Roundtable Summary...................................................................................................
    [Show full text]
  • MOGUL BASE LED REPLACEMENT LAMPS Report Summary
    PHASE 1: MOGUL BASE LED REPLACEMENT LAMPS Report Summary December 18, 2014 A Report of BPA Energy Efficiency’s Emerging Technologies Initiative Prepared for Levin Nock, Project Manager for Aerotek Staffing Agency, on assignment to Bonneville Power Administration John Wilson, Program Manager Bonneville Power Administration And Washington State University Energy Program This report summary was condensed by Levin Nock for the DesignLights Consortium Technical Committee, from the complete 71-page report prepared by The Lighting Research Center, Rensselaer Polytechnic Institute 21 Union Street Troy, NY 12180 Leora C. Radetsky Jennifer Brons Russ Leslie BPA Contract Number: 115764 G003306 Abstract Mogul base LED replacement lamps are being marketed as equivalent replacements for incumbent HID lamps. LRC characterized the HID marketplace and conducted photometric and electrical testing on 18 mogul base LED lamps to inform the DesignLights Consortium (DLC) on these products’ performance in consideration of them being added to the Qualified Products List (QPL). LRC found that 4 of the 18 lamps met the minimum tested DLC QPL criteria for retrofit kits when the lamps were placed in area lighting and roadway luminaires. The wall pack and high bay luminaire combinations did not meet the applicable tested retrofit kit criteria. Additional testing will be conducted in Phase 2 of this project to better inform the DLC on these lamps’ performance. This report summary includes an Executive Summary of 2 pages, a main body of 15 pages, and an Appendix. 1 An Emerging Technologies for Energy Efficiency Report The following report was funded by the Bonneville Power Administration (BPA) as an assessment of the state of technology development and the potential for emerging technologies to increase the efficiency of electricity use.
    [Show full text]
  • Energy Efficient Lighting What Is Light? Electromagnetic Radiation
    What is Light? Electromagnetic Radiation Energy Efficient Lighting Scott Sanford Senior Outreach Specialist University of Wisconsin – Madison 2 Sensitivity of an average humans eye What is Light? • http://www.lrc.rpi.edu/resources/publicat ions/pdf/illuminationfund.pdf • Figure 3.4 Source: The Light Measurement Handbook – Alex Ryer, International Light 3 4 Technologies; http://files.intl-light.com/ILT-Light-Measurement-Handbook.pdf Terminology Terminology • Lamps not bulbs • Color Temperature (CT) – Units of Kelvin • Indicates the light color – red to blue • Fixture – enclosure that provides support and mounting for ballast, lamps, reflector and diffuser • Lamp Depreciation • Percentage reduction in lamp output as lamp ages (mean lumen • Lamp output – Lumens output / initial lumen output). • a measure of the power of light perceived by the human eye • (60 w incandescent = ~ 850 L) • Light Loss Factor • Intensity – measured in foot-candles (fc) or Lux • Includes Lamp Depreciation plus environmental factors like dirt • Office – 50 FC accumulation on diffuser • Dairy barn – 10-20 FC • Average Rated Life – • Color Rendering Index (CRI) • mean time for 50% of lamps to burn out or stop functioning properly • Ability of humans to perceive colors under artificial light compared to natural sunlight express as a percent. 5 6 1 Color Temperature • Skylight (clear blue sky) 12-20,000K • Daylight 5000 - 6500K • Cool white / Bright White 3500 - 4100K • Warm White / Soft White 2700 - 3000K • High pressure sodium lamp 2100K • Mercury Vapor 5700K • Incandescent 2500 - 2900K • Match or candle flame 1700 - 1900K 273ºK = 0ºC = 32ºF 7 Color Rendering Index • Ability of humans to perceive colors under artificial light compared to sunlight.
    [Show full text]
  • Quality Lighting's Landscape Lighting Plan to Guide the Sales Force Into Successful Sales
    Lynn University SPIRAL Student Theses, Dissertations, Portfolios and Projects Theses and Dissertations Collections 4-14-1995 Quality Lighting's Landscape Lighting Plan to Guide the Sales Force Into Successful Sales Christy Mazzola Lynn University Follow this and additional works at: https://spiral.lynn.edu/etds Part of the Sales and Merchandising Commons Recommended Citation Mazzola, Christy, "Quality Lighting's Landscape Lighting Plan to Guide the Sales Force Into Successful Sales" (1995). Student Theses, Dissertations, Portfolios and Projects. 264. https://spiral.lynn.edu/etds/264 This Thesis is brought to you for free and open access by the Theses and Dissertations Collections at SPIRAL. It has been accepted for inclusion in Student Theses, Dissertations, Portfolios and Projects by an authorized administrator of SPIRAL. For more information, please contact [email protected]. QUALITY LIGHTING'S LANDSCAPE LIGHTING PLAN TO GUIDE THE SALES FORCE INTO SUCCESSFUL SALES By: Christy Mazzola Dr. Butler April 14, 1995 OUTLINE I. The Project A. Assessing Project Needs 1. Interviewing clients and design team 2. Reviewing architectural and landscape plans 3. Visiting the site B. Documenting and Installing Landscape Lighting 1. Visual design phase 2. Design development phase 3. Construction or contract documents 4. Bidding phase 5. Construction phase 6. Aiming and adjusting lighting system 7. Follow-up 11. Materials and Technology A. Light Sources 1. Physical characteristics 2. Lamp types 3. Functional and operational characteristics B. Light Fixtures 1. Selection criteria 2. Fixture types 3. Accessories 4. Safety C. Corrosion, Materials and Finishes 1. Corrosion 2. Materials 3. Finishes D. Controls 1. Issues 2. Designing control systems 3.
    [Show full text]
  • ORDINANCE NUMBER 3582 an Ordinance Amending Chapter 8.64 Missoula Municipal Code Entitled "Missoula Outdoor Lighting Ordina
    ORDINANCE NUMBER 3582 An ordinance amending Chapter 8.64 Missoula Municipal Code entitled "Missoula Outdoor Lighting Ordinance" Sections 8.64.030, 8.64.060, 8.64.070, and 8.64.150 to revise regulations for the exterior lighting of a building. Be it ordained that Chapter 8.64, Sections 8.64.030, 8.64.060, 8.64.070 and 8.64.150 are amended as follows: Chapter 8.64 MISSOULA OUTDOOR LIGHTING ORDINANCE 8.64.030 Definitions. CANDELA: The metric unit luminous intensity (that is, power emitted by a light source in a particular direction, with wavelengths weighted by the luminosity function, a standardized model of the sensitivity of the human eye). CUTOFF: See FULL CUTOFF or SEMI CUTOFF DIRECT GLARE SOURCE: Light that originates in a direct line of sight from a source which results in objectionable glare. EXISTING STREET LIGHTING: Those streetlight fixtures in operation prior to the effective date of this ordinance. LIGHT FIXTURE: The assembly that holds the lamp in a lighting system. It includes the elements designed to give light output control, such as a reflector (mirror) or refractor (lens), the ballast housing, and the attachment parts. FOOTCANDLE: (fc) a unit of measurement for a total amount of light cast on a surface (illuminance). One foot-candle is equivalent to the illuminance produced by a source of one candle at a distance of one foot. Vertical foot-candle is the measurement on a vertical surface. Horizontal foot-candle is a measurement on a horizontal surface. FULL CUTOFF FIXTURE: An outdoor lighting fixture that emits 0% of its light above 90 degrees and 10% above 80 degrees from horizontal.
    [Show full text]
  • 2013 Catalog the Designs of RAB fixtures Are Protected Under U.S
    RAB is continually improving our products. Specifications may change without notice. 2013 Catalog The designs of RAB fixtures are protected under U.S. and international intellectual property laws. Printed in the United States of America. Tech Help Line - Call our experts e-mail - Answered promptly rabweb.com - Visit our website Northvale, New Jersey 07647 USA 888 RAB-1000 [email protected] for product info Table of Contents HID/CFL LUMINAIRES INTRODUCTION WALLPACKS 56 THE PERFECT MIX OF PERFORMANCE AND PAYBACK ....................................... 4 OVER 66 YEARS OF INNOVATION ..................................................................... 6 BARNLIGHTS 61 FRIENDLY PEOPLE FAST ANSWERS .................................................................. 8 FAST DELIVERY - From A Rab Warehouse Near You .............................................................. 10 GO BEYOND FOOTCANDLES - Free Application Engineering & Energy Analysis ................................ 12 FLOODLIGHTS 62 LIGHTING YOU CAN BE PROUD OF - Architectural Uniformity And Quality ................................ 14 DESIGNED TO PERFORM - 100% Tested. Designed Beyond Standards .......................................... 16 WHY LED? - Say Goodbye To Costly Relamping. .................................................................... 18 AREA LIGHTS 68 LED LUMINAIRES POLES/BRACKETS 70 LPACK® - WALLPACKS 22 ALED™ - AREA LIGHTS 26 SENSORS - Outdoor 72 CLED™ - CEILING 28 SENSORS - Occupancy 76 PLED™ - PENDANTS 30 LFLOOD® - FLOODLIGHTS 32 HIGH/LOW BAYS 78 SOLAR LED 36 VANDALPROOF
    [Show full text]
  • Chapter 2 Incandescent Light Bulb
    Lamp Contents 1 Lamp (electrical component) 1 1.1 Types ................................................. 1 1.2 Uses other than illumination ...................................... 2 1.3 Lamp circuit symbols ......................................... 2 1.4 See also ................................................ 2 1.5 References ............................................... 2 2 Incandescent light bulb 3 2.1 History ................................................. 3 2.1.1 Early pre-commercial research ................................ 4 2.1.2 Commercialization ...................................... 5 2.2 Tungsten bulbs ............................................. 6 2.3 Efficacy, efficiency, and environmental impact ............................ 8 2.3.1 Cost of lighting ........................................ 9 2.3.2 Measures to ban use ...................................... 9 2.3.3 Efforts to improve efficiency ................................. 9 2.4 Construction .............................................. 10 2.4.1 Gas fill ............................................ 10 2.5 Manufacturing ............................................. 11 2.6 Filament ................................................ 12 2.6.1 Coiled coil filament ...................................... 12 2.6.2 Reducing filament evaporation ................................ 12 2.6.3 Bulb blackening ........................................ 13 2.6.4 Halogen lamps ........................................ 13 2.6.5 Incandescent arc lamps .................................... 14 2.7 Electrical
    [Show full text]
  • Exhibit 1 First Amended Complaint Against Feit Clean
    Case 2:20-cv-04926-AB-PJW Document 27 Filed 08/10/20 Page 1 of 39 Page ID #:244 1 Seth Alan Gold (SBN 163220) [email protected] 2 Roya Rahmanpour (SBN 285076) [email protected] 3 BARNES & THORNBURG LLP 2029 Century Park East, Suite 300 4 Los Angeles, California 90067 Telephone: (310) 284-3880 5 Facsimile: (310) 284-3894 6 Todd G. Vare (Admitted pro hac vice ) [email protected] 7 Paul B. Hunt (Admitted pro hac vice ) [email protected] 8 BARNES & THORNBURG LLP 11 S. Meridian Street 9 Indianapolis, IN 46204 Telephone: (317) 236-1313 10 Facsimile: (317) 231-7433 11 Attorneys for Plaintiff CAO Lighting, Inc. 12 IN THE UNITED STATES DISTRICT COURT 13 CENTRAL DISTRICT OF CALIFORNIA 14 CAO LIGHTING, INC. , Case No.: 2:20 -CV -04926 -AB -PJW 15 Plaintiff, FIRST AMENDED COMPLAINT FOR: 16 v. INFRINGEMENT OF U.S. PATENT 17 NO. 6,465,961 FEIT ELECTRIC COMPANY, INC., a 18 California corporation 19 Defendant. [DEMAND FOR JURY TRIAL] 20 21 22 23 24 25 26 27 28 PLAINTIFF’S FIRST AMENDED COMPLAINT Case 2:20-cv-04926-AB-PJW Document 27 Filed 08/10/20 Page 2 of 39 Page ID #:245 1 Plaintiff CAO LIGHTING, INC. (“CAO Lighting”), by and through its counsel, 2 Barnes & Thornburg LLP, files this First Amended Complaint against Defendant FEIT 3 ELECTRIC COMPANY, INC. (“Feit” or “Defendant”) and alleges as follows: 4 PRELIMINARY STATEMENT 5 1. This is a patent infringement action under the patent laws of the United 6 States, Title 35 of the United States Code and, as such, this Court has exclusive subject 7 matter jurisdiction under 28 U.S.C.
    [Show full text]
  • NYSERDA How-To Guide to Effective Energy-Efficient Street Lighting for Planners and Engineers
    NYSERDA How-to Guide to Effective Energy-Efficient Street Lighting for Planners and Engineers October 2002 New York State Energy Research and Development Authority Table of Contents Page i. Introduction....................................................................................................................... 1 Purpose of this Guide..........................................................................................................1 I. Effective Energy-Efficient Street Lighting Principles and Opportunities................... 3 What is Effective Energy-Efficient Street Lighting?.......................................................... 3 Effective Energy-Efficient Street Lighting Opportunities and Benefits............................. 4 II. Getting Started.................................................................................................................. 5 STEP 1: Understand the Overall Project Goal................................................................... 5 STEP 2: Identify and Understand the Design Issues and Constraints ............................... 6 STEP 3: Assess Design Resources .................................................................................... 9 STEP 4: Use the NYSERDA Model Performance Criteria and Design Guidelines for Street Lighting ........................................................................... 10 III. Model Performance Criteria and Design Guidelines for Street Lighting ................. 11 Introduction......................................................................................................................
    [Show full text]
  • Complete Packet
    CHUCK ENGELKEN, CHAIR JAY MARTIN Councilmember, District 2 Alternate Member 1 DARYL LEONARD DOTTIE KAMINSKI Councilmember, District 3 Alternate Member 2 TOMMY MOSER Councilmember, District 4 CITY OF LA PORTE FISCAL AFFAIRS COMMITTEE MEETING AGENDA Notice is hereby given of a meeting of the City of La Porte Fiscal Affairs Committee to be held on April 28, 2014, in the City Hall Council Chambers, 604 W. Fairmont Parkway, La Porte, Texas, beginning at 5:00 PM regarding the items of business according to the agenda listed below: 1. Call to order 2. Consider approval of minutes of the March 10, 2014, meeting of the Fiscal Affairs Committee - P. Fogarty 3. Receive and review Second Quarter (FY 2014) Investment Report - M. Dolby 4. Receive and review month of December(FY2013), January (FY2014) and February (FY2014) Purchasing Card Expenditures - M. Dolby 5. Set date for next meeting — M. Dolby 6. Administrative Reports — C. Alexander 7. Committee Comments regarding matters appearing on agenda — Committee members Engelken, Leonard, Moser, and Martin 8. Adjourn In compliance with the Americans with Disabilities Act, the City of La Porte will provide for reasonable accommodations for persons attending public meetings. To better serve attendees, requests should be received 24 hours prior to the meetings. Please contact Patrice Fogarty, City Secretary, at 281.470.5019. CERTIFICATION I certify that a copy of the April 28, 2014, agenda of items to be considered by the Fiscal Affairs Committee was placed on the City Hall Bulletin Board on April 22, 2014
    [Show full text]
  • Unified Development Ordinance
    Village of Carol Stream UNIFIED DEVELOPMENT ORDINANCE Draft for Review Purposes Only March 2021 Table of Contents Article 1: General Provisions…………………………………………………….3 Article 2: Definitions………………………………………………………………6 Article 3: District Specific Standards………………………………………….31 Article 4: Use Specific Standards……………………………………………...55 Article 5: Development Standards…………………………………………….74 Article 6: Sign Standards………………………………………………………128 Article 7: Planned Development Standards…………………………………152 Article 8: Administration and Enforcement………………………………...159 Article 9: Subdivision Standards……………………………………………..199 Article 10: Nonconforming Lots, Buildings, Structures, and Uses……….216 DRAFT FOR REVIEW PURPOSES ONLY Article One – General Provisions 1-1 - Title........................................................................................................................................................................ 1 1-2 - Purpose ................................................................................................................................................................. 1 1-3 - Intent ..................................................................................................................................................................... 1 1-4 - Interpretation ....................................................................................................................................................... 2 1-5 - Private Agreements .............................................................................................................................................
    [Show full text]