2018 ECLIPSE CROSS OWNER’S HANDBOOK PLEASE PLACE COPIES OF THE FOLLOWING ITEMS IN THE POCKET BELOW:
1. Pre-Delivery Inspection Form (Customer Copy) 2. Triple Diamond Delivery Checklist (Customer Copy) 3. Salesperson or Key Dealership Contact’s Business Card 1
TABLE OF CONTENTS
Thank you for buying a Mitsubishi Eclipse Cross. There’s no doubt you’ve already realized how well your Driver’s View ...... Page 2 car drives on the open road. What you may not know is all the great features that help your car perform My Mitsubishi Connect App. . . Page 4 Controls...... Page 6 the way it does. In the pages ahead we’re going to run through the basics and prepare you for the road. Own the Road...... Page 8 Switches...... Page 9 We hope you will visit the Mitsubishi Owner’s site where we store the latest Mitsubishi news Advanced Technology. . . . . Page 10 and special offers. Here you can also keep track of your car’s warranty and servicing needs, Operations...... Page 13 get Roadside Assistance Information and tap into other owner-centric details. Just log on to HomeLink® (if equipped). . . .Page 14 WWW.MITSUBISHICARS.COM/OWNERSONLY. Display Audio System (if equipped) ...... Page 15 Smartphone Link Thin-Display Audio (SDA) (if equipped). . . .Page 16 Bluetooth® Operation with SDA (if equipped). . . . .Page 18 Comfort and Convenience . . . Page 19 Multi-Information Display . . . Page 20 FAQ’s...... Page 21
Some of the information contained in this booklet may not be correct due to product changes which may have occurred after the time it was published. Mitsubishi Motors North America, Inc. reserves the right to make changes at any time, without notice, to prices, color, materials, specification and models. 2 8 7 DRIVER’S VIEW
1 Climate Controls ...... Page 6 2 Headlights...... Page 6 3 Cruise Control / Adaptive Cruise Control (if equipped)...... Page 8 4 S-AWC Drive Mode Selector (if equipped) ...... Page 8 5 Paddle Shifters (if equipped). . . . . Page 8 15 6 Lane Departure Warning (LDW) Switch and Forward Collision Mitigation (FCM) 5 5 Switch (if equipped)...... Page 9 2 7 Start/Stop Engine Switch 10 (if equipped with F.A.S.T.-Key Fob). . .Page 13 8 Head Up Display (if equipped). . . . Page 12 3 9 HomeLink® (if equipped)...... Page 14 10 Audio Remote Control Switch. . . . .Page 14 12 11 Display Audio / Smartphone Link 6 Thin-Display Audio...... Page 15 12 Bluetooth® Controls for SDA (if equipped) ...... Page 18 13 Seat Heater Switch (if equipped). . . Page 19 14 Heated Steering Wheel Switch. . . . Page 19 15 Multi-Information Display (MID). . . .Page 20 3
9 11
4
13 1
14 4 MY MITSUBISHI CONNECT APP
MITSUBISHI CONNECT ENROLLMENT PROCESS Go to the Apple App Store or Google Play Store and search for the “My MITSUBISHI CONNECT” app and download.
1 Open the app and click on the "Let's Get Started" button 4 Scan or manually enter the Vehicle Identification Number. to begin enrollment process.
2 Read the Terms & Conditions and press "Accept" at 5 Confirm Vehicle Identification Number is your vehicle and the bottom right of the smartphone screen to proceed then press "Pair With Vehicle" button on the app. with registration. If you “Decline” you will be unable to continue with enrollment.
3 Start engine and idle for 60 seconds to get vehicle 6 Now press the black "i" button in the overhead console. online, leave engine ON until account setup is complete. This will send an outbound call and generate a random 4-digit audio pairing code. MY MITSUBISHI CONNECT APP 5
7 Listen for a recorded voice to announce a 4-digit audio 10 Enter your personal profile information, such as first and PAIRING PIN. Enter this 4 digit PAIRING PIN in the app to last name, street address, city, state and mobile phone register your vehicle. and confirm.
8 Your device is now registered to your vehicle, press 11 Create an easy to remember 4 digit security PIN to "Complete Registration" on app and continue to setup protect access to your remote app controls. your account profile.
9 Enter your primary email address and password in the 12 Enter or skip credit card entry. By Account Setup screen. providing a valid credit card during IMPORTANT: YOUR PASSWORD enrollment you will receive a 30% • Must be between 8 to 15 characters, have one savings on renewal of Safeguard and uppercase letter, one lowercase letter, one special Remote Services subscription bundle. character and one number IMPORTANT: YOUR CREDIT CARD IMPORTANT: YOUR EMAIL ADDRESS • Your credit card will not be charged • This email will be the primary email for all account until expiration of trial period communications YOU ARE NOW CONNECTED! 6 CONTROLS
REGULAR HEADLIGHTS AUTOMATIC HEADLIGHTS (IF EQUIPPED) Headlights and other lights on. Parking, tail, front and rear sidemarker lights, license plate and instrument panel lights on. Headlights and other lights turn on and off automatically in accordance with outside light level. All lights off.
DUAL-ZONE AUTOMATIC CLIMATE CONTROL (IF EQUIPPED) A - Push to select the desired temperature B - Push to select outside air (Indicator light off) or recirculated air (Indicator light on) C - Push for air conditioning ON/OFF E D C A A D - Push to select the blower speed E - Push to select the position of air flowing from the vents F - Push to defog windshield B F G H I G - When the AUTO switch is pushed, the settings are automatically controlled. H - Pressing the SYNC switch allows both the driver's and the passenger's side temperatures to be synchronized. I - Push to defog the rear windows and to activate the De-Icer Controls (if equipped) CONTROLS 7
WINDSHIELD WIPERS SIDE MIRROR ADJUSTMENT A The outside rearview A mirrors can be adjusted The wipers will operate once. when the ignition switch is in the ON or ACC position INT: Intermittent intervals can be adjusted or the operation mode is by turning the knob A . put in ON or ACC. AUTO: The wipers will be operated A Push the lever A to the automatically by rain sensor (if equipped). same side as the mirror B you wish to adjust. Slow The side mirrors can be folded in and out by Fast pressing the Power Folding Side Mirror switch B (if equipped). REAR WINDOW WIPER/WASHER
Turn the knob B to operate the rear B FOLDING SIDE MIRRORS (IF EQUIPPED) window wiper. The mirrors will The wiper operates continuously for several automatically fold seconds then operates intermittently at in when the vehicle intervals of about 8 seconds. is turned off and the vehicle is placed in Park under the following two Washer fluid is sprayed, the wiper will conditions: automatically operate 2 or 3 times. 1. The F.A.S.T.-Key button located on the door handle is pressed to lock the doors. 2. The Lock button on the remote control is pressed. 8 OWN THE ROAD
PADDLE SHIFTERS (IF EQUIPPED) CRUISE CONTROL / ADAPTIVE CRUISE CONTROL (IF EQUIPPED) Simply upshift or downshift with a tap A - CANCEL: To deactivate the ACC or of your fingers – without moving your cruise control. hands from the steering wheel. B - RES + : To increase the set speed You can return to the “D” operation by A B or resume control after cancelling pulling the + (SHIFT UP) side paddle the ACC or cruise control function. shifter rearwards (toward the driver) C C - SET – : To set the desired speed and holding for over 2 seconds. and to reduce the set speed. D D - ON/OFF: To turn cruise control ON or OFF. E E - ACC DISTANCE SWITCH: Used to set or change the following distance between your vehicle and S-AWC DRIVE MODE SELECTOR (IF EQUIPPED) the vehicle in front of you. The drive mode can be switched by pressing the drive mode button TO SET A CRUISING SPEED while the ignition switch is in the ON position. 1. Press D and the “ACC” (if equipped) or “CRUISE” indicators will appear in the Multi-information Display. Pressing the SELECTOR will change 2. Accelerate or decelerate to your desired speed (above 25 mph). the drive mode in order to: Press C and remove your foot from the accelerator pedal. AUTO à SNOW à GRAVEL TO ACCELERATE OR DECELERATE SPEED Push up B to increase set cruising speed. Push down C to decrease set cruising speed. TO CANCEL THE CRUISING SPEED Press A or press the brake pedal, or press D . SWITCHES 9
ACTIVE STABILITY CONTROL (ASC) OFF SWITCH LANE DEPARTURE WARNING (LDW) SWITCH (IF EQUIPPED) You can deactivate the system by pressing When you press the LDW switch located on the down the “ASC OFF” switch for 3 seconds left side of the steering column, the “LDW” or longer. When the ASC is deactivated, the indicator on the information screen of the display/indicator will turn on. Multi-information Display turns OFF and the LDW system is inactive. To reactivate the ASC, momentarily press the “ASC OFF” switch; the display/indicator is Press the switch again, the system turned off. will activate.
FORWARD COLLISION MITIGATION (FCM) SWITCH (IF EQUIPPED) Every time the operation mode is turned to “ON”, the FCM will automatically be turned on. To turn off the FCM, press and hold the FCM switch located on the left side of the steering column. The “FCM OFF” message and indicator will appear in the Multi-information Display. To change the warning distance mode, briefly press the FCM switch.
The Forward Collision Mitigation (FCM) system is a driver aid only and is not a substitute for safe and careful driving. Under certain circumstances, the system may not detect other vehicles and/or pedestrians correctly. 10 ADVANCED TECHNOLOGY
BLIND SPOT WARNING WITH LANE CHANGE ASSIST (BSW) (IF EQUIPPED) REAR CROSS TRAFFIC ALERT (RCTA) (IF EQUIPPED)
The Blind Spot Warning (BSW) is a driving aid system that alerts the driver when another vehicle which may not be visible through the outside rearview mirror is traveling in the next lane behind your vehicle. When a vehicle in the next lane is traveling at same speed or faster in the detection areas, the Blind Spot Warning light in the corresponding outside rearview mirror will illuminate. If the turn signal lever is operated to the side where the Blind The Rear Cross Traffic Alert (RCTA) is an aid system for backing up. When Spot Warning light is illuminated, the Blind Spot Warning light will blink and the RCTA detects vehicles approaching from sides while your vehicle is a buzzer will sound to alert the driver. reversing, the Blind Spot Warning lights in the outside rearview mirrors on Depending on the relative speed between your vehicle and a vehicle in the both sides will blink and a buzzer will sound to alert the driver. A warning next lane, the Blind Spot Warning will detect up to approximately 230 feet message will also appear on the Multi-information Display. from your vehicle. Rear Cross Traffic Alert will be activated from 0 MPH when the vehicle is shifted into Reverse and will detect on-coming vehicles that are passing behind you. (Note: Minimum speed required for passing vehicles. See Owner’s Manual for details). Rear radar transceivers will detect on-coming rear traffic and will light up in the mirror and in the Multi-information Display as well as sound a warning alert.
The Blind Spot Warning, Lane Change Assist and Rear Cross Traffic Alert systems are driver aids only and are not substitutes for safe and careful driving. Under certain circumstances, these systems may not detect other vehicles correctly. ADVANCED TECHNOLOGY 11
AUTOMATIC HIGH BEAM HEADLIGHTS (AHB) (IF EQUIPPED) MULTI-VIEW CAMERA
Press the button on the end of the left stock while turning on the head lamp to When you put the vehicle into reverse, the rear view camera only turn on the Auto High Beam (AHB) operation. When an oncoming vehicle or/and will display the image behind the vehicle. To engage the Multi-View preceding vehicle approaches, AHB switches high-beam to low-beam until that camera, press the rectangular icon button above the Speech vehicle is clear of the vehicle’s detection area and switches back to high-beam button. This view can be seen in reverse or in drive, up to a speed once the detection area is clear. of 5 MPH. Cameras placed at four positions around the vehicle provide visibility that would normally not be seen. The Display Audio screen will show two images of the vehicle's immediate surroundings. 12 ADVANCED TECHNOLOGY
TOUCHPAD CONTROLS (IF EQUIPPED) HEAD-UP DISPLAY (HUD) (IF EQUIPPED) The Head Up Display (HUD) shows information on a transparent display so you can easily check the following information while driving: - Vehicle speed - Cruise Control information - Warning information from Forward Collision Mitigation and Lane Departure systems - When utilizing the paddle shifters, the display will show the current gear the vehicle is in
HUD OPERATIONS OPENING THE DISPLAY ONE FINGER FLICK: Move cursor PUSH: Select 1. With the ignition switch in the "ON" position or the operation mode ON, push A to open the display. 2. The launch screen will be displayed and then the HUD information will display. TWO FINGER FLICK (UP/DOWN): Vol up/down TWO FINGER FLICK (LEFT/RIGHT): Audio C A B CLOSING THE DISPLAY 1. Press the A switch and the ending screen will display. 2. Screen will close. Turning off the ignition will close the display automatically. DO NOT attempt to close the screen manually. HOME AUDIO Move to HOME Screen Change an audio source or move to current audio scource screen. ADJUSTING THE ANGLE OF THE DISPLAY When the display is open, push the B to raise or lower the angle of the display. APPLE CARPLAY, BACK ANDROID AUTO Return to the previous screen. ADJUSTING THE BRIGHTNESS OF THE DISPLAY Move to Apple CarPlay or Android Auto screen When the display is open, push C to adjust brightness of the display. OPERATIONS 13
F.A.S.T.-KEY FOB (IF EQUIPPED) START/STOP ENGINE SWITCH (IF EQUIPPED WITH F.A.S.T.-KEY FOB) While carrying the F.A.S.T.-Key fob within the operating range, the OPERATION INDICATOR LIGHT Start/Stop Engine Switch can be used to start the engine. LOCK ( ) BUTTON • To start engine, make sure the selector lever is in the (Park) position and hold the brake pedal down. Push the Start/Stop UNLOCK ( ) BUTTON Engine Switch. • To stop the engine, stop the vehicle completely and move the PANIC BUTTON selector lever to “P” then press the Start/Stop Engine Switch. *If you have to bring the engine to an emergency stop while driving, press and F.A.S.T.-KEY FOB hold the Start/Stop Engine Switch for more than 3 seconds.. • If you press the Start/Stop Engine Switch without depressing the brake pedal, While carrying the F.A.S.T.-Key you can change the operation mode in the order of OFF, ACC, ON, OFF. Please fob, press the driver’s door make sure vehicle is completely stopped before changing the operation mode. lock/unlock switch . *If the engine cannot be started, depress the brake pedal more firmly than usual with the right foot. Then press the Start/Stop Engine Switch. • If the engine cannot be started or the operation mode cannot be changed, check the position of the F.A.S.T.-Key fob or the battery performance of the IF THE F.A.S.T.-KEY FOB IS NOT OPERATING PROPERLY F.A.S.T.-Key fob. 1. Take the key A out to unlock the door 2. Press the break pedal and hold the F.A.S.T-Key fob B up to SECOND ROW SEAT OPERATION the Start/Stop Engine Switch button. Pull the seat adjusting lever up and slide the seat forward 3. Starting the engine should now be possible or backward to the desired position. Release the adjusting lever to lock the seat in place.
TO ADJUST THE SEAT BACKS Pull the lever up and adjust the seatback by hand to the desired position, and release the lever. The seatback will A lock in place. B 14 HOMELINK® (IF EQUIPPED)
PROGRAMMING A NEW HOMELINK® To program HomeLink® to operate a garage door, gate, or entry door opener, home or office lighting, you need to be at the same location as the device. 1. Press the HomeLink® button that you would like to program. The indicator light (A) will flash orange slowly. 2. Position the end of your hand-held transmitter (B) 1 to 3 inches away from the HomeLink® button while keeping the indicator light in view. 3. Press and hold the hand-held transmitter button while watching the indicator light (A). Continue pressing the button until the indicator light (A) changes from slowly flashing orange to either rapidly flashing green (rolling code) or continuously lit green (fixed code). Now you may release the hand-held transmitter button. 4. Press the just-trained HomeLink® button and observe the indicator light. 1 - HomeLink® button 1 • If the indicator light stays on constantly green, programming is complete and your device should operate 2 - HomeLink® button 2 when the HomeLink® button is pressed and released. 3 - HomeLink® button 3 • If the indicator light rapidly flashes green, firmly press, hold for 2 seconds and release the programmed HomeLink® button. Repeat the “press/hold/release” sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process. At this point if your device operates, programming is complete. • If the device does not operate, continue with “Programming a new HomeLink®” steps 5 to 7 to complete the programming of a rolling code equipped device. 5. At the garage door opener receiver (motor-head unit) in the garage, locate the “Learn” or “Smart” button. This can usually be found where the hanging antenna wire is attached to the motor-head unit (see your garage door opener manual to identify the “Learn” button). 6. Firmly press and release the “Learn” or “Smart” button. (The name and color of the button may vary by manufacturer.) There are typically 30 seconds to initiate step 7. 7. Return to the vehicle and firmly press, hold for 2 seconds and release the programmed HomeLink® button. Repeat the “press/hold/release” sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process. HomeLink® should now activate your rolling code equipped device. NOTE: Some hand-held transmitters may actually train better from a distance of 6 to 12 inches. Keep this in mind if you have difficulty with the programming process. DISPLAY AUDIO (IF EQUIPPED) 15
LISTENING TO THE RADIO BLUETOOTH® INFORMATION To Register a Bluetooth® Device: 1. Press the HOME key A 2. Touch SETTING, then BLUETOOTH E B 3. Touch the NEW DEVICES (If no Bluetooth® devices are registered, Step 3 is not required) ® C F • If the Bluetooth device is permitted to pair then it will allow the connection to be made.
D G • Supports Ver. 2.1 + EDR • Supported profiles: Bluetooth® Audio A2DP(V1.1), AVRCP(V1.3); Hands-free HFP(v1.5); Phonebook transfer PBAP(v1.0)
A - Selects AM/FM E - Seek stations up or down When Bluetooth® is connected, 3 icons will display – the antenna level B - Selects type of Media F - Returns to the initial display (1 to 6), battery, Bluetooth® connected (shown on the HOME screen) (MP3 and BT-A) G - Tune stations / adjust C - Phone sound settings D - Power and Volume knob TO ADJUST THE CLOCK 1. Press the HOME key This HD Radio receiver enables: 2. Touch SETTING, then CLOCK PSD Program Service Data: Contributes to the superior user - The display changes to the clock setting where time and format can experience of HD Radio Technology. Presents song name, be adjusted. artist, station IDs, HD2/HD3 Channel Guide, and other 3. Touch SET relevant data streams. 4. To return to the settings, touch BACK HD2/HD3 Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original 5. The time setting change is completed music as well as deep cuts into traditional genre. DIGITAL SOUND Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. Bluetooth is a registered trademark of Bluetooth SIG, Inc. 16 SMARTPHONE LINK THIN-DISPLAY AUDIO (SDA) (IF EQUIPPED)
SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED) ACCESSING AM OR FM STATIONS Make sure you are on the Home Screen and touch either FM or the AM button. A D TO SET A STATION IN MEMORY 1. Once the station you want to save is shown on the screen, touch and B E hold the preset boxes on the touch screen until you hear a beep. 2. Once you hear a beep, the station will be saved to memory.
C F SETTING THE CLOCK The clock adjustment procedure is as follows: 1. Press the HOME key A - Apps C - Audio E - Volume Down 2. Touch CLOCK B - Home D - Volume Up F - Power The display changes to the clock setting where time and format can be adjusted. HD RADIO 3. Touch SET To select the HD Radio, touch the Smartphone Link 4. To return to the settings, touch BACK Thin-Display Audio HD Channel icon. The number of HD Radio will appear in a drop down menu. Select the designated HD Radio. 5. The time setting change is completed Another way to select HD Radio station is to use the touchpad (if equipped). With the display identifying HD Radio are present, perform the following: 1. Swipe the touchpad to the left to the radio menu 2. Swipe down to HD Radio 3. Press down on the touchpad to select 4. Swipe through the HD Radio selections 5. Press down on the touchpad to select SMARTPHONE LINK THIN-DISPLAY AUDIO (SDA) (IF EQUIPPED) 17
ACCESSING APPLE CARPLAY™ USB INPUT 1. Make sure your iPhone® has iOS8.0 or later and 1. Park your vehicle in a safe place and that you are using a genuine Apple Lightning® turn the ignition switch to the "OFF" to USB cable. position or put the Operation Mode 2. Connect the Apple Lightning® to USB cable to in OFF. your phone and to the vehicle's USB port. 2. Plug in the USB factory cable that is supplied with your device and connect 3. Apple CarPlay will automatically connect. To Number of USB ports may differ use the iPhone with Apple CarPlay even while locked, choose "Allow" on your the USB end into the input terminal iPhone's screen after the first connection. located below the Climate Controls. 4. You can operate Siri by pressing and holding the Steering Wheel Audio Speech 3. Turn the ignition switch or the Operation Mode to the "ACC" button until prompted on the screen. position. Turn on the audio system. 4. There are 2 ways to access your USB - Go to Home Screen and scroll to USB, press button ACCESSING ANDROID AUTO™ - Click on Audio button by Touch Pad on the center console. 1. Make sure your phone has Android 5.0 or later. 5. Depending on your USB device, it may take longer for playback to start. 2. You must download the Android Auto app from the Google Play Store. This process may take 6. Once the device is selected, playback starts. up to a couple of minutes. 3. Connect the manufacturer's phone cable from your phone into the vehicle's USB port. AUDIO REMOTE CONTROL SWITCH VOLUME UP 4. Follow your phone’s on-screen instructions until you are connected to Android Auto. You can press the Speech button on the Steering Wheel Audio Controls SEEK to activate voice operation. Change station or track
MODE Change the audio source VOLUME DOWN
Apple CarPlay, iPhone, Siri and Lightning are trademarks of Apple Inc., registered in the U.S. and other Countries. Android, Android Auto, Google Play and other marks are trademarks of Google Inc. 18 BLUETOOTH® OPERATION WITH SMARTPHONE LINK THIN-DISPLAY AUDIO (SDA) (IF EQUIPPED)
BLUETOOTH® CONTROLS FOR SDA TO MAKE A CALL For a list of compatible Bluetooth® devices, please go to There are 3 ways to make a call: by saying a telephone number, by using the http://www.mitsubishicars.com/owners Bluetooth 2.0 interface's phonebook, and by redialing a telephone number. SPEECH BUTTON SAYING A TELEPHONE NUMBER (IF EQUIPPED) Change to voice recognition 1. Press the Speech button. PICK-UP BUTTON 2. Say "Dial Number." Answer an incoming call 3. After the voice guide says "Number please," say the telephone number. HANG-UP BUTTON End a call or voice recognition 4. The voice guide will say "Dialing
ELECTRIC PARKING BRAKE SWITCH (IF EQUIPPED) HEATED STEERING WHEEL SWITCH (IF EQUIPPED) This system will be used to engage The warmer will be activated by pressing the and/or disengage electric parking brake. Heated Steering Wheel Switch. To turn off Heated Pull up on switch to engage the parking Steering Wheel, press switch again. Warmer will brake while depressing brake pedal. automatically turn off after 30 minutes. The Brake Warning Lamp and light in the switch will illuminate when engaged. Push down on switch to disengage parking brake while depressing the brake pedal and Brake Warning Lamp and light in the switch will be off when disengaged. PANORAMIC SUNROOF (IF EQUIPPED) AUTO HOLD is used to hold the vehicle stationary by pressing the OPENING AND CLOSING THE FRONT SUNROOF momentary-contact AUTO HOLD switch prior to releasing the brake pedal. Slide the Sunroof switch A towards the back of the vehicle to open or towards the front of the vehicle to FRONT SEAT HEATER SWITCH (IF EQUIPPED) close the front sunroof automatically. POSITION ACTION TILTING THE FRONT SUNROOF HI For quick heating A B Press A to tilt the front sunroof up or pull A down to NEUTRAL Heater off lower the front sunroof automatically LO Keeps seat warm OPENING AND CLOSING THE FRONT SUNSHADE Slide the Sunshade switch B towards the back of the vehicle to open or REAR SEAT HEATER SWITCH (IF EQUIPPED) towards the front of the vehicle to close the front sunshade automatically. Each time the switch is pressed, the mode changes from OFF à HI à LO à OFF PANORAMIC SUNROOF (IF EQUIPPED) POSITION ACTION OPENING AND CLOSING THE REAR SUNSHADE OFF No lights illuminated Slide the rear sunshade switch towards the back of the vehicle to open or towards the front of the vehicle to HI Two lights illuminated close the rear sunshade automatically. (For quick heating) LO One light illuminated (To keep seat warm) 20 MULTI-INFORMATION DISPLAY
MULTI-INFORMATION DISPLAY SWITCH INSTANT FUEL CONSUMPTION DISPLAY While driving, the instant fuel consumption is shown with a bar graph. The “ ” mark in the instant fuel gauge shows the average fuel consumption. Each time the Multi-information Display switch is operated, the buzzer sounds and When the instant fuel consumption the Multi-information Display changes surpasses the average fuel between information such as warnings, consumption, the instant fuel consumption is displayed with a green bar trip odometer, average and instant fuel graph. consumption, distance range, etc. Maintaining your fuel consumption above the average fuel consumption point will help increase your mileage per gallon.
TIRE PRESSURE MONITORING SYSTEM (TPMS) ECO MODE SWITCH The Tire Pressure Monitoring System light ECO MODE is an eco-driving support system illuminates when one or more of your tires which automatically controls the engine and air is significantly under inflated. Please note conditioning system to improve fuel efficiency. that changes in the outside temperature may decrease tire pressure causing the TPMS To activate, press the ECO MODE switch. light to turn on. If the TPMS light remains illuminated, check your tire pressure. If the warning light illuminates, take the necessary measures referring to the owner’s manual. FAQ'S 21
Q: Is my phone compatible with the factory Mitsubishi Bluetooth® System? A: Check the list of compatible phones, www.mitsubishicars.com/owners to see if the phone is Bluetooth® supported.
Q: How do I use Bluetooth® Audio? A: Please refer to your Owner’s Manual for instructions.
Q: My Eclipse Cross has two 12V accessory outlets. What devices can be plugged into these outlets? A: These outlets are protected with 15 amp fuses. Always check the current draw rating of any device prior to use in the vehicle. If the device is rated above 12 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q: Why does the Audio System take so long to upload my music from my audio music device? A: The Mitsubishi system can read multiple device structures in order to catalog the music files for easy playing and listening. Depending on the amount of music you have on your device, this may take a few minutes.
Q: What are the different ways of playing music from my portable music player through the stereo system in my vehicle? A: There are two ways of playing music through your vehicle’s sound system. • USB port - The system will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have the audio system find and play the song in your device that you prefer without physically searching your device. This is done via voice commands. • Bluetooth® Streaming - Once your device is paired to the system, you can stream music from your device through the audio system to your vehicles sound system. No wires or cords. Your music stops and restarts at the same song when you exit and when you re-enter the vehicle. Voice commands are not available.
Q: Why can’t I control the music track selection via voice commands while Bluetooth® streaming? A: The Mitsubishi system uses AVRCP 1.3 (Audio/Video Remote Control Profile) which does support song information (title, artist, track, etc.). However, you must have a device that also supports AVRCP 1.3 to supply that information to the Mitsubishi system.
Q: My Eclipse Cross is equipped with “Micron Air Filtration.” Where is the filter located and does it need servicing? A: The micron air filter is a small filter element which is located in the HVAC box just behind the lower glove box. The filter should be inspected frequently for debris. The filter works well at filtering incoming air however the filter will clog and lead to reduced outlet air volume if not serviced on a regular basis. 22 FAQ’S
Q: Why does my Anti-Lock Braking System (ABS) make a noise? A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front engine compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: How can I get the MPG stated on the window sticker? A: Vehicle driving styles will greatly affect MPG. • Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both of these styles will increase mileage and reduce brake lining wear. • Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 65 mph. • Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon. Proper tire pressure also ensures optimum tire performance (including tire wear.)
Q: Why do my Rain Sensing Windshield Wipers operate on their own when it’s not raining? A: • When the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers. • The wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor or when the windshield is frosted over. • To stop the wipers, place the lever in the OFF position.
Q: Why does my check engine light come on after I put gas in my car? A: There are many reasons why your check engine light may illuminate. Before calling your dealership, make sure the fuel cap is fully engaged and you have heard three clicks when tightening it. After checking and hearing three clicks and the light is still on, contact your dealership. NOTES 23 24 NOTES 2018 ECLIPSE CROSS
MITSUBISHICARS.COM
REV 01/18