Star Wars Monopoly (Glowforge)
Total Page:16
File Type:pdf, Size:1020Kb
instructables Star Wars Monopoly (GlowForge) by MichaelMikkelson May the 4th be with you! Having recently invested in a GlowForge laser cutter, Almost all of my initial projects and pieces coming off the Glowforge were gifts for others. I cut some things on wood, engraved from slate, and even made an multi-level topographic map. However, I wanted to do something for myself. There were a ton of users on the GlowForge forums making Settlers of Catan boards, which is awesome. I decided to try something different, and create my own custom Monopoly board, but better yet, an original Star Wars Trilogy Monopoly board. This game will go into my personal collection. It is not for sale. Having recently played Monopoly for the first time in a long time, I thought that I could create pretty much everything needed for a custom Monopoly board with my GlowForge. it ended up being a much bigger project than just creating a custom board, as I also made the tokens, property cards, dice, money, community chest, chance cards, bankers tray, and custom box. My version of the game is based loosely off the Parker Brothers original trilogy Star Wars Monopoly edition, with many variations. "I am one with the Force, and the Force is with me..." *** I used a GlowForge laser cutter using .SVG files from Adobe Illustrator. The files I share in this thread are Illustrator .AI files, which would need to be re-saved as .SVG files to work on a GlowForge. The main materials I used: 2 x 1/4" x 12" x 20" Cherry Proofgrade Plywood (Game board) 2 x 1/8" x 12" x 20" Proofgrade Draftboard (Property Cards) Different Color Cardstock paper for the Money, chance, and community chest cards. Scrap proofgrade plywood for tokens, houses, and hotels. Acrylic paint for property cards and board spaces. Blank Dice Star Wars Monopoly (GlowForge): Page 1 Star Wars Monopoly (GlowForge): Page 2 Step 1: Board Design Doing a quick google search brought up a number of resources for helping getting started on a personalized version of Monopoly. Use the Hasbro My Monopoly website to create a custom board Plenty of Etsy sellers with custom boards Google it. I found a few sites with templates as well. Hobbylark Brad Frost Photoshop Template Seminopoly Illustrator Template I ended up redrawing the entire board, as I didn't find anything that was precise enough to use on my project. Since I knew that I was going to use the GlowForge to score the board grid on the wood, I wanted to ensure that all the lines were joined properly and the exact length. The GlowForge bed is limited to wood that is currently 12" x 20". Even though I have the pro model with pass through slot, I wanted a board the would fold up, so ended up making this in 2 halves. Knowing that the GlowForge would do a combination of cutting, engraving, and scoring, I kept each of these elements on their own layer in Illustrator, and used different colors for fill and stroke so the GlowForge webapp separates each of these into their own configurable instance. I have attached the board grid Illustrator files below. Feel free to use them as you see fit. None of the graphics or artwork is included in those files, just the layout and grid for you to use in your own Monopoly board.*** *** Since this is a Star Wars monopoly board, I used clip art and images I found through a google image search. I do not own the copyright to these images, and am using them for my own personal use. This instructable is here to show you my process in making this Monopoly board using a GlowForge, but cannot directly share any of the individual trademarked or images that were created by other artists. Add images to a new layer in Illustrator for whatever theme Monopoly board you are making. Star Wars Monopoly (GlowForge): Page 3 Download https://www.instructable…s.com/ORIG/FRV/XYGB/JGGTQF0B/FRVXYGBJGGTQF0B.ai Download https://www.instructable…s.com/ORIG/F2L/2EPI/JGGTQF2I/F2L2EPIJGGTQF2I.ai Step 2: Cutting / Scoring / Engraving the Board! Each half of the board took almost 3 hours each to video above is 2 hours an 57 minutes condensed run its course through the GlowForge. I tried a couple down to just over a minute for the top half of the game if different types of plywood including Maple and board. The masking tape prevents excessive burn Cherry. I also tried inverting the middle image to save and creates clean lines when the process is time on the engrave, but ended up using the non- complete. inverted image for the final board. The time lapse Star Wars Monopoly (GlowForge): Page 4 https://vimeo.com/267840409 https://vimeo.com/267841588 Step 3: Property Cards I designed the property cards to look similar to the painted the box, and then removed the rest of the original design, but moved the title outside of the masking after the paint dried. color box. I used the GlowForge to score the lettering into the tiles using the Kabel Monopoly font, and cut Instead of having houses and hotels, or cities and each tile out. I also scored the mortgage information spaceports, my properties each have custom into each tile individually on the back. The tiles were "houses" and "Hotels." For example, if you land on painted with acrylic paint in a similar color to the Dabobah, you get huts for houses, and the Dark side original game, which will match the spaces on the cave for the hotel. If you land on the Death Star, your game board.. The tiles were cut from medium draft houses are Storm Troopers, and you hotel is the board, and will be spray painted with a sealant at Tractor beam. On Jabba's Sail barge, it has servant some point. The masking tape that comes on droids, and the Sarlacc Pit. You get the jist. Prices for proofgrade draftboard from GlowForge acted as a these custom houses and hotels are the same as the good mask for painting the property colors. I peeled original game. off the rectangle that was scored in each card, Download https://www.instructable…s.com/ORIG/FKQ/94OG/JGQTKR1S/FKQ94OGJGQTKR1S.ai Star Wars Monopoly (GlowForge): Page 5 Step 4: $15,140 Galactic Credits! (Laser Cut Monopoly Money) I used a monopoly money template that I found on Go size on the GlowForge. ogle search., and added some Star Wars flair by making each denomination include an image from the I used Adobe Photoshop to create the layers for the Empire, with laser cut Galactic Empire logo cut out of bills with 10 bills on each page. I then used Illustrator each bill. I ended up printing the design of the to create the outlines that will be cut using the Monopoly money on thicker cardstock paper, versus GlowForge, and saved as an .SVG format. the thin paper the original money comes on. I did this because I had access to free colored paper, so it was The money comes in 20, $500 bills, 20, $100 bills, 30, an easy choice. I used a standard black and white $50 bills, 50, $20 bills, 40, $10 bills, 40, $5 bills, and laser printer to print 10 bills on each piece of paper, 40, $1 bills. and then used the template to cut each bill the same Star Wars Monopoly (GlowForge): Page 6 Step 5: Tokens / Houses / Hotels Tokens: game! I cut the tokens out of scrap cherry plywood, using Houses / Hotels: the GlowForge or course, and used a 2 piece design for the pieces. Each character has a 1/8" tab at the I didn't really have any clever idea for the houses and bottom of each piece, and a .75" base to with a .115" hotels, and went with a generic tile for each. Since square cut out of the middle. It creates a snug fit, but my properties could be anything from a hut, to a the pieces could be taken apart if needed. To create spaceship, to a planet, I thought going with something each character, I use Adobe illustrator to create an simple was warranted for this custom game. I cut the outline using the offset path tool to give the 32 houses out of clear 1/8" acrylic and the hotels out GlowForge some room to do the engraving. The cut of black 1/8" acrylic. path was a different layer than the engrave path. Simple, but fun and unique tokens for the Monopoly Star Wars Monopoly (GlowForge): Page 7 Step 6: Chance & Community Chest I changed the Chance spaces on the Board to read GlowForge to cut the cards out with rounded corners. Galactic Empire, and the Community Chest spaces to say Rebel Alliance. I created custom cards for both of *** I was educated by someone on the Glowforge these, and printed them out on cardstock. The plan is forum that I misspelled Wookiee on these cards. to have them professionally printed by Moo.com, Thanks for the heads up, as I should have known which has square business cards that can have a that. I haven’t finalized the cards that i’m going to different design on a=each card. I'll wait for a sale or have printed professionally, so the good news is that discount code to come my way, but until then, the this is an easy fix. printed versions will work just fine. I used the Star Wars Monopoly (GlowForge): Page 8 Star Wars Monopoly (GlowForge): Page 9 Step 7: Bankers Tray Using Illustrator, I created a bankers tray to cut on the GlowForge in 1/8" Proofgrade Cherry.