MSDS MTN MAD MAXXX Colors EN-US
Total Page：16
File Type：pdf, Size：1020Kb
Safety data sheet according to 29 CFR 1910.1200 EX017M1021M - MTN MAD MAXXX Colors SECTION 1: IDENTIFICATION 1.1 GHS Product identifier: EX017M1021M - MTN MAD MAXXX Colors Other means of identification: Non-applicable 1.2 Recommended use of the chemical and restrictions on use: Relevant uses: Spray paint Uses advised against: All uses not specified in this section or in section 7.3 1.3 Name, address, and telephone number of the chemical manufacturer, importer, or other responsible party: MONTANA COLORS, S.L. Pol. Ind. Pla de les Vives C/ Anaïs Nin 6 08295 Sant Vicenç de Castellet - Barcelona - España Phone.: +34 938332760 (9:00- 16:00h GMT +1:00) [email protected] https://www.montanacolors.com 1.4 Emergency phone number: Call CHEMTREC Day or Night. Within USA and Canada: 1-800-424-9300. SECTION 2: HAZARD(S) IDENTIFICATION 2.1 Classification of the substance or mixture: NFPA: Health Hazards: 2 Flammability Hazards: 4 Instability Hazards: 0 Special Hazards: Non-applicable 29 CFR 1910.1200: Classification of this product has been carried out in accordance with paragraph (d) of § 1910.1200. Aerosol 1: Flammable aerosols, Category 1, H222 Eye Irrit. 2: Eye irritation, Category 2, H319 Skin Irrit. 2: Skin irritation, Category 2, H315 Skin Sens. 1: Sensitisation, skin, Category 1, H317 STOT RE 2: Specific target organ toxicity, repeated exposure, Category 2, H373 STOT SE 3: Specific toxicity causing drowsiness and dizziness, single exposure, Category 3, H336 2.2 Label elements: NFPA: 29 CFR 1910.1200: Danger Hazard statements: Aerosol 1: H222 - Extremely flammable aerosol. Eye Irrit. 2: H319 - Causes serious eye irritation. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1: H317 - May cause an allergic skin reaction. STOT RE 2: H373 - May cause damage to organs through prolonged or repeated exposure. STOT SE 3: H336 - May cause drowsiness or dizziness. Precautionary statements: - CONTINUED ON NEXT PAGE - Printing: 3/5/2021 Date of compilation: 3/5/2021 Version: 1 Page 1/15 Safety data sheet according to 29 CFR 1910.1200 EX017M1021M - MTN MAD MAXXX Colors SECTION 2: HAZARD(S) IDENTIFICATION (continued) P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read label before use. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. P260: Do not breathe dust/fume/gas/mist/vapours/spray. P271: Use only outdoors or in a well-ventilated area. P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. P501: Dispose of contents and / or their container according to the separated collection system used in your municipality. Substances that contribute to the classification Ethyl acetate; Reaction mass of ethylbenzene and m-xylene and p-xylene ; N-butyl acetate; 2-methoxy-1-methylethyl acetate; Reaction mass of: N,N-Ethane-1,2-diylbis(decanamide)/12-Hydroxy-N-[2-[1-oxydecyl)amino]ethyl]octadecanamide/N,N-Ethane -1,2-diylbis(12-hydroxyoctadecanamide); 2-butanone oxime. 2.3 Hazards not otherwise classified (HNOC): Non-applicable SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1 Substances: Non-applicable 3.2 Mixtures: Chemical description: Aerosol Components: Remaining components are non-hazardous and/or present at amounts below reportable limits. The specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret in accordance with paragraph (i) of §1910.1200.Therefore, in accordance with Appendix D to § 1910.1200, the product contains: Identification Chemical name/Classification Concentration Ethyl acetate CAS: 141-78-6 10 - <25 % Eye Irrit. 2: H319; Flam. Liq. 2: H225; STOT SE 3: H336 - Danger Butane CAS: 106-97-8 10 - <25 % Flam. Gas 1A: H220; Press. Gas: H280 - Danger Reaction mass of ethylbenzene and m-xylene and p-xylene CAS: Non-applicable Acute Tox. 4: H312+H332; Asp. Tox. 1: H304; Eye Irrit. 2: H319; Flam. Liq. 3: H226; Skin Irrit. 2: H315; STOT 10 - <25 % RE 2: H373; STOT SE 3: H335 - Danger Titanium dioxide (aerodynamic diameter ≤ 10 μm) CAS: 13463-67-7 1 - <20 % Carc. 2: H351 - Warning Propane CAS: 74-98-6 2,5 - <10 % Flam. Gas 1A: H220; Press. Gas: H280 - Danger Isobutane CAS: 75-28-5 2,5 - <10 % Flam. Gas 1A: H220; Press. Gas: H280 - Danger N-butyl acetate CAS: 123-86-4 2,5 - <10 % Flam. Liq. 3: H226; STOT SE 3: H336 - Warning 2-methoxy-1-methylethyl acetate CAS: 108-65-6 2,5 - <10 % Flam. Liq. 3: H226; STOT SE 3: H336 - Warning Reaction mass of: N,N-Ethane-1,2-diylbis(decanamide)/12-Hydroxy-N-[2-[1-oxydecyl)amino] CAS: Non-applicable ethyl]octadecanamide/N,N-Ethane-1,2-diylbis(12-hydroxyoctadecanamide) <1 % Skin Sens. 1: H317 - Warning 2-butanone oxime CAS: 96-29-7 <1 % Acute Tox. 4: H312; Acute Tox. 5: H303; Eye Dam. 1: H318; Flam. Liq. 4: H227; Skin Sens. 1: H317 - Danger 2-ethylhexanoic acid, zirconium salt CAS: 22464-99-9 <1 % Repr. 2: H361 - Warning To obtain more information on the hazards of the substances consult sections 11, 12 and 16. SECTION 4: FIRST-AID MEASURES - CONTINUED ON NEXT PAGE - Printing: 3/5/2021 Date of compilation: 3/5/2021 Version: 1 Page 2/15 Safety data sheet according to 29 CFR 1910.1200 EX017M1021M - MTN MAD MAXXX Colors SECTION 4: FIRST-AID MEASURES (continued) 4.1 Description of necessary measures: The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt, seek medical attention for direct exposure to the chemical product or persistent discomfort, showing the SDS of this product. By inhalation: Remove the person affected from the area of exposure, provide with fresh air and keep at rest. In serious cases such as cardiorespiratory failure, artificial resuscitation techniques will be necessary (mouth to mouth resuscitation, cardiac massage, oxygen supply, etc.) requiring immediate medical assistance. By skin contact: Remove contaminated clothing and footwear, rinse skin or shower the person affected if appropriate with plenty of cold water and neutral soap. In serious cases see a doctor. If the product causes burns or freezing, clothing should not be removed as this could worsen the injury caused if it is stuck to the skin. If blisters form on the skin, these should never be burst as this will increase the risk of infection. By eye contact: Rinse eyes thoroughly with lukewarm water for at least 15 minutes. Do not allow the person affected to rub or close their eyes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, as this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product. By ingestion/aspiration: Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion. 4.2 Most important symptoms/effects, acute and delayed: Acute and delayed effects are indicated in sections 2 and 11. 4.3 Indication of immediate medical attention and special treatment needed, if necessary: Non-applicable SECTION 5: FIRE-FIGHTING MEASURES 5.1 Suitable (and unsuitable) extinguishing media: Suitable extinguishing media: If possible use polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers (CO₂). Unsuitable extinguishing media: IT IS RECOMMENDED NOT to use full jet water as an extinguishing agent. 5.2 Specific hazards arising from the chemical: As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk. 5.3 Special protective equipment and precautions for fire-fighters: Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment. Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...) Additional provisions: As in any fire, prevent human exposure to fire, smoke, fumes or products of combustion. Only properly trained personnel should be involved in firefighting. Evacuate nonessential personnel from the fire area. Destroy any source of ignition. In case of fire, refrigerate the storage containers and tanks for products susceptible to inflammation. Avoid spillage of the products used to extinguish the fire into an aqueous medium. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures: Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those without protection. Personal protection equipment must be used against potential contact with the spilt product (See section 8). Above all prevent the formation of any vapour-air flammable mixtures, through either ventilation or the use of an inertization agent. Destroy any source of ignition. Eliminate electrostatic charges by interconnecting all the conductive surfaces on which static electricity could form, and also ensuring that all surfaces are connected to the ground. 6.2 Environmental precautions: This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water. - CONTINUED ON NEXT PAGE - Printing: 3/5/2021 Date of compilation: 3/5/2021 Version: 1 Page 3/15 Safety data sheet according to 29 CFR 1910.1200 EX017M1021M - MTN MAD MAXXX Colors SECTION 6: ACCIDENTAL RELEASE MEASURES (continued) 6.3 Methods and materials for containment and cleaning up: It is recommended: Absorb the spillage using sand or inert absorbent and move it to a safe place.