solaris 11 vm iso download Solaris X86 Iso. Solaris 10 ISO got from the sun site (grub installed). A running ArchLinux x8664 installation. A running Windows 7 x86 installation with Cygwin (Though I guess it may be not that useful?) And here is what I have tried but failed: unetbootin (a tool that write Linux ISO’s to a USB flash drive, Solaris. In this lab, you will learn how to install the Oracle Solaris 11.2 Image for Oracle VM VirtualBox—the easiest way to get up and running with Oracle Solaris 11.2. The Solaris Operating System, usually known simply as Solaris, is a Unix-based operating system introduced by Sun Microsystems. The Solaris OS is now owned by Oracle. Sun Solaris 2.x. It is the successor to Sun OS and was released initially in June of 1992. The OS is based off of System V Unix and its first release was known internally as SunOS 5. This OS was typically used on SPARC based processors, up until 1994 when it began to support x86 and x86-64 based machines. Published April 2015. Prerequisites. This lab is the first is a series of labs for Oracle Solaris 11. All of the labs in the series have these prerequisites in common: Operating system: Windows, Mac OS X, Linux, or Oracle Solaris on x86 Memory: 2 GB of RAM. Before starting the lab, ensure you have installed the following: Download and install Oracle VM VirtualBox; see Installation Details for notes on installing on any of the above operating systems. Download and install the Oracle VM VirtualBox Extension Pack and follow the instructions at Installing VirtualBox and extension packs. Also, you must enable hardware virtualization support in the BIOS. Oracle Solaris depends on those capabilities. Exercise 1: Download the Oracle Solaris 11 VM for Oracle VM VirtualBox. Download the template (that is, the virtual machine [VM]) called Oracle Solaris 11.2 Oracle VM Template for Oracle VM VirtualBox. This page is found off the main Oracle Solaris downloads page. Exercise 2: Import the Oracle Solaris 11.2 VM into Oracle VM VirtualBox. 1. Start Oracle VM VirtualBox. 2. Select File > Import Appliance. (This lab shows screen shots on a Mac. Screens might look slightly different on a PC.) Browse to the location where you downloaded the Oracle Solaris 11.2 VM and select it. Notice that Figure 1 mentions the OVF format, but the downloaded file is a .ova file, which is the entire archive (including OVF.xml). Click Continue. 3. Before importing the VM, check the memory settings. Scroll down to check how much memory is allocated to the image. Oracle Solaris 11.2 (or later) requires a minimum of 2 GB of memory. 4. Click the Import button. In this exercise, we will run Oracle Solaris 11 for the first time—getting a basic understanding of what's there: 1.Select the Oracle Solaris 11.2 VM and click the green arrow labeled Start. On first boot, the System Configuration Tool runs, prompting you to enter system information providing an explanation of what is to follow. Note that during installation, you have to actively switch between the VM and your host OS. Oracle VM VirtualBox will open a window to explain this. After the VM boots, the environments are integrated, so when you move the mouse pointer over the VM, any input will be directed to the VM, and when you move the mouse pointer outside the VM, subsequent input will go to the host OS. Figure 5. First screen of the System Configuration Tool. - Set the region. - Set the country. - Set the time zone. 3. The next screen will prompt you for system name. 4. The third screen will prompt for networking settings. Choose Automatic. 5. Next will be three screens to set the time: 6. Then set the date. 7. And select the keyboard. 8. Set the password. Make sure you enter user account information as well as the root password. You will log in through the user account. Figure 6. Screen for entering user account and password information. For this example, we created the user demo during the configuration step, so we now log into that account. 9. Next, there will be two screens to enable the Oracle Configuration Manager, that is, 'phone home' capability. Unless you enter your My Oracle Support credentials (e-mail address and password) this data gathering facility will not be activated. (No specific user information is collected and Oracle treats the data collected as a customer's private information.) 10. Finally, you will be presented with a summary page: 11. Press F2 to apply the specified configuration, and then Oracle Solaris will complete the configuration/boot process. 12.Log in to Oracle Solaris using the user account you set up in Step 8 above. Figure 10. Investigating the Oracle VM VirtualBox package. The Oracle Solaris guest additions package creates tighter integration between the host OS and Oracle Solaris. For example, you can cut and paste text between the two operating systems. You can also put Oracle Solaris into full-screen mode. Do this now by selecting Machine > Switch to Fullscreen. Exiting full-screen mode is most easily accomplished by moving your mouse cursor to the bottom middle of the screen, which will cause a menu to appear. This will print out data about all the pools and subpools created. Because there is only one pool in use on this system, a more succinct way to get information is to just look at rpool with the zpool (1M) command: zpool list rpool. Figure 11. Listing data about all the pools and subpools. sudo cat /etc/sudoers. Doing this will give you privileges to run as the root user for five minutes. The demo account user attributes are in /etc/user_attr. If you look at the contents of the file, you will notice that when the demo user was created, it was given the role of type=root. Hence, it can operate with root privileges. 13. After logging in, you should see the blank background of the user's desktop. Bring up a terminal window by clicking the icon that looks like a computer screen (located on the left side of the top bar of the Oracle VM VirtualBox window). 14. To get started, investigate the Oracle VM VirtualBox package by running the command pkginfo -l SUNWvboxguest in the terminal window. 15. Next, enter the following command: 16. If you regularly use sudo(1), you can type in a command such as the following and enter the password of the demo account. There are two ways to take a snapshot of your environment. The first is the traditional mechanism for VMs—capture all the information of that machine so that you can start it up from that saved state later. This includes a snapshot of the local file system. To take a snapshot, from the VirtualBox menu, select Machine > Take Snapshot. Give the snapshot a name and optional description: The other approach is using the capability of ZFS. There are two ways to do this: one for system administrators and one for users. Battlefront 3 free radical download. For System Administrators (SAs) To create a snapshot (called a boot environment [BE]), use the beadm(1M) command. A BE includes all the files Oracle Solaris needs to operate. For example, to create a snapshot of the current Oracle Solaris environment, run the following command: After a snapshot has been created, the SA would then perform some action that would impact the Oracle Solaris environment, say, adding new packages. In the unlikely situation there is a problem from this action, the SA can reboot to safety-net-be to get back to a known working state. When updating packages, for example, installing the monthly Support Repository Update, a boot environment is typically automatically created and the patches will be applied to that BE, not to the running system. In that case, after updating, the SA would reboot into the just-created BE containing the updated Oracle Solaris environment. If, after some testing, the SA is not satisfied with the update, it is easy to reboot to the pre- update state. Creating a BE (a copy of your current Oracle Solaris environment) is a very fast process and shows off one of the key feature of ZFS: What is initially copied are mostly pointers to data blocks in the file system, not data blocks themselves. Over time, as the current Oracle Solaris environment changes, blocks might need to be rewritten. The old version of a block pointed to by the BE created earlier would not be updated, but a new block would be created for the current BE with updated data. BEs are not only fast to create, they are very economical from a storage perspective because the copy, that is, the current BE, has only blocks that are different from the original environment. Over time as changes are made, and new blocks are modified, added, or deleted, the snapshot grows. ZFS snapshots are fast and efficient, but they are only a snapshot the Oracle Solaris part of the system (for example, anything that could be patched). So user directories such as /export/home are not included in a snapshot. ZFS snapshots, though, are immensely helpful when making any system software changes, because it is a trivial reboot to get back to the previous environment. See the beadm(1M) man page for information on how to select what BE to activate on next reboot, or any other of a number of administrative actions. For Users. In any sort of production environment, backups are made on a regular basis. Individuals can augment these through Time Slider, a facility that allows taking frequent snapshots of a user's data. Time Slider can be accessed from the desktop through System->Administration-> Time Slider. Wrap Up. That's it for this very brief introduction. Now you have an environment in which you can begin to learn about all the great features in Oracle Solaris 11. And with the snapshot features mentioned above, you never have to worry about messing anything up, because you can always roll back to a prior known good state. When you are ready to halt the VM, go to the upper left corner of the display and click System. From that menu, you can shut down the system. See Also. For additional information about Oracle Solaris 11 and the technologies used in this lab, see 'Taking Your First Steps with Oracle Solaris 11.' About the Author. Jeff McMeekin is an Oracle Solaris product manager. You can install Oracle Solaris 11 by using either an interactive or an automated installation . With an interactive installation, you have two options: The LiveCD for x86-based systems A text installer that can be used on either x86 or SPARC machines. These options are designed for installing the OS on a single system, whereas the automated installation option (commonly known as the Automated Installer, or AI) provides a “hands-free” network installation on a single system or for multiple-client systems. System Requirements. Make sure the system has the below minimum requirements fulfilled, before beginning the installation of Solaris 11. Hardware Requirement Disk space Recommended minimum: 13 GB Memory Recommended minimum: 1 GB Architectures X86 : 64-bit only, SPARC : Oracle Solaris M-series and T-series systems only. Installing Oracle Solaris 11 Using an Interactive Installer (Text Install on x86 VM) For the purpose of this post, we will install Oracle Solaris 11 in an x86 VM machine. The process remains same while installing on SPARC based systems. To prepare for the installation, you first download and save the ISO image to your system. Select the ISO image as the boot media in Bios to begin the installation. On the First screen, you are prompted to select the keyboard layout and language. Select appropriate keyboard layout and language here and proceed. On next screen, you would see the text installer menu. The menu contains several options: Install Oracle Solaris : Allows you to install the operating system Install Additional Drivers : Allows you to install any device drivers that may be required to support the operating system Shell : Provides a shell; can be used to debug the installation Terminal type (currently sun-color) : Provides a means of displaying the text installer correctly in case the default terminal type doesn’t work Reboot : Enables you to reboot the system after the installation has completed. To initiate the installation, select option 1. The default, as indicated by the number 1 in brackets, is to install Oracle Solaris, so all you have to do is press Enter to continue. “Welcome to Oracle Solaris” Screen. This screen provides you with the temporary location of the installation log (/system/volatile/install_log) as well as instructions on how to navigate through the installer by using the function keys located at the bottom of the screen and the up and down arrow keys. To continue to the Disk screen, press the F2 function key. Selecting a Disk. From the Welcome screen, you are taken to the Disks screen, where you are prompted to select where you want Oracle Solaris to be installed. To select the highlighted disk and continue to the next screen, press F2. Selecting an Fdisk Partition. From the Disks screen, you are taken to the Fdisk Partitions (or the formatting disks) screen, where you can select to use a whole disk or to partition the disk. The “ Use the whole disk ” option is highlighted by default. Using the whole disk is highly recommended. To select this option and continue to the next screen, press F2. Selecting a Network. The next screen is the Network screen, where you provide a computer name and select the wired Ethernet network connection configuration (Automatically, Manually, or None). The Automatically option automatically configures the network connection for you. The Manually option enables you to manually configure the network connection by responding to the prompts presented on the subsequent screens. The None option tells the system that you do not want to configure the network at this time. To select one of these options, arrow down to Automatically, Manually, or None. When you have the desired option highlighted, press F2 to select it and continue. For this post example, you will manually configure the network. Manually Configuring the Network. The next screen prompts you for the IP address for the network interface. In this example, the network interface is net0. When you have entered the required information for your network configuration, press F2 to continue. DNS Name Service. The next screen provides you the opportunity to configure a DNS name service. To configure a DNS name service, select the first option. If you do not want to configure DNS, select the second option. In this example, you are not going to configure DNS. Alternate Name Service. The next screen enables you to select an alternate name service, such as LDAP or NIS. For this example, you are going to select None. Selecting the Time Zone: Regions. The next screen that appears is “ Time Zone: Regions “, where you select the region that contains the time zone that is appropriate to your installation. To make your selection, arrow down to the region and then press F2 to select it and continue. In this example, you are going to select Asia . Setting the Time Zone: Locations. The next screen is the Time Zone: Locations screen, where you select the location that contains the time zone that is appropriate to your installation. Again, to make your selection, arrow down to the location of your choice and then press F2 to select it and continue. In this example installation, India is selected for the location. Solaris X86 Download Iso. Selecting the Time Zone. You next see the Time Zone screen. The selections presented on this screen are based on the region and location selections you made previously. To select the appropriate time zone, arrow down until your time zone is highlighted, and then press F2. To support the example installation, you select Asia/Kolkata . Setting the Date and Time. The “ Date and Time ” screen appears next. Review the information that is presented and edit it as required. Note that the time is in the 24-hour format. After you have made the necessary edits, press F2 to continue. Providing User Information. Next is the Users screen, where you enter your user information to include the system root password, your name, your username, and your user password. To continue, press F2. Reviewing Installation Summary. After completing the configuration data, you see the Installation Summary screen. Review the information carefully to make sure it is accurate before you start the installation. To start the installation, press F2. Monitoring the Installation. The Installing Oracle Solaris screen enables you to monitor the progress of the installation. The installation takes about 10 to 15 minutes to complete. Solaris 7 X86 Iso Download. Verifying the Installation. When the installation concludes, the Installation Complete screen appears. This screen provides you with access to the installation log and, an opportunity to verify that no error messages were generated and that all the major facilities installed successfully. You have the option of viewing the log at its /system/volatile/install_log location before rebooting by pressing F4. Alternatively, you can view the log at /var/sadm/system/logs/install_log after reboot. Solaris 11 X86 Iso. Rebooting the System. After you have verified that the installation was successful, you can reboot the system by pressing F8. If you press F9 to quit, you are returned to the text installer menu, where you can select option 5 to reboot the system. Oracle ® Solaris 11.4 Release Notes. This section provides information for installing Oracle Solaris 11.4. System Requirements for Installing Oracle Solaris 11.4. This section provides memory and disk space requirements for installing Oracle Solaris 11.4. Oracle Solaris provides several system installation group packages. The text installer and the default AI manifest in an Automated Installer installation install the solaris-large-server group package. The default installation manifest for non-global zones installs the solaris-small-server group package. The solaris-minimal-server group package installs the minimum supported set of packages required to run Oracle Solaris. You might want to modify a default installation manifest to install solaris-minimal-server , and then install additional packages as needed. The recommended minimum system memory is 4 GB. The following table shows the recommended minimum disk space for each system installation package group. Platform Support. Oracle Solaris 11.4 supports systems based on the Oracle SPARC T4 or later processors; the Fujitsu SPARC64 X, X+, or XII processors; or x64 CPUs supporting either the Intel EM64T or AMD AMD64 instruction sets. You will not be able to upgrade to Oracle Solaris 11.4 on any of the following platforms. See Oracle Solaris 11.3 Support (Doc ID 2382427.1) for information about keeping these systems up to date with critical fixes for Oracle Solaris 11.3 until you can upgrade the hardware: SPARC Enterprise M3000, M4000, M5000, M8000, and M9000 systems that use SPARC64 VI, VII, or VII+ CPUs. Platforms based on UltraSPARC T1 CPUs - Sun Fire T1000 and T2000, Sun SPARC Enterprise T1000 and T2000, Netra CP3060, Netra T2000, and Sun Blade T6300. Platforms based on UltraSPARC T2 CPUs - Sun SPARC Enterprise T5120 and T5220, Sun Blade T6230, Netra CP3260, and Netra T5220. Platforms based on UltraSPARC T2+ CPUs: Sun SPARC Enterprise T5140, T5240 and T5440, Sun Blade T6340, Sun Netra T6340, and Netra T5440. Platforms based on SPARC T3 CPUs: SPARC T3-1, T3-1B, T3-2 and T3-4, Netra SPARC T3-1, and Netra SPARC T3-1BA. Sun Java Workstation models: W1100z, W2100z. Sun Ultra Workstation models: 20, 20 M2, 40, 40 M2. Sun Fire server models: V20z, V40z, X2100, X2100 M2, X2200 M2, X4100, X4100 M2, X4140, X4200, X4200 M2, X4240, X4440, X4540, X4600, X4600 M2, X4640. Sun Blade server modules: X6220, X6240, X6440, X8400, X8420, X8440. Some capabilities that were available in Oracle Solaris 11.3 and earlier releases are now obsolete and have been removed from Oracle Solaris 11.4. An upgrade to Oracle Solaris 11.4 will remove any obsolete capabilities that are currently installed on the system. For example, drivers for some legacy devices have been deprecated in Oracle Solaris 11.4. If you upgrade systems with these devices, you might lose the ability to access those devices from Oracle Solaris 11.4. Before you upgrade, review the End of Feature Notices for Oracle Solaris 11. For information about supported systems and implementation differences between platform types, see Oracle Solaris 11 Hardware Compatibility List. Oracle recommends updating your system firmware to the latest available prior to installation of Oracle Solaris 11.4. See Firmware Downloads and Release History for Oracle Systems. SPARC: Legacy Systems Require Firmware Update to Support Oracle Solaris Kernel Zones. Although Oracle SPARC T4, SPARC T5, SPARC M5, SPARC M6, and Fujitsu SPARC M10 systems were released with firmware versions to boot Oracle Solaris 11.4, the firmware must be updated if Oracle Solaris kernel zones support is required. Oracle SPARC M7, SPARC M8, SPARC T7, and SPARC T8 systems do not require firmware updates to support kernel zones on Oracle Solaris 11.4. Installing Oracle Solaris 11.4. The instructions in this section are for a fresh installation. If you are updating an older Oracle Solaris 11 installation, see Updating Your Operating System to Oracle Solaris 11.4 . For a fresh installation, go to the Oracle Solaris 11 - Downloads site to accept the license and download one of the Oracle Solaris 11.4 installation images. To install Oracle Solaris 11.4, see the following installation guides: Use one of the following methods to access additional Oracle Solaris 11.4 packages: Download the Oracle Solaris 11.4 package repository file. Go to the Oracle Solaris 11 - Downloads site to download the Oracle Solaris 11.4 package repository file. See Creating Package Repositories in Oracle Solaris 11.4 for information about downloading and installing a local package repository, configuring the solaris publisher to use the local repository, and providing access to the local repository from other systems. Use the pkg.oracle.com/solaris/support or pkg.oracle.com/solaris/release package repository. If you add packages as part of the installation, use the key and cert elements of the credentials element in the installation manifest. setterm Is Not Automatically Installed. Starting with Oracle Solaris 11.2, setterm is no longer installed as part of the system/locale/extra package. To get setterm , install the system/locale/setterm package. See the setterm (1) man page for information about the setterm command. How to download and install Unix Solaris OS on VirtualBox. We are very well acquainted with Linux, however, when it comes to UNIX based operating system then most don’t know from where to download it. Just like Linux Distros Unix is also available under different names such as Oracle Solaris, OpenSolaris (Discontinued), FreeBSD, OpenBSD, NetBSD and DragonflyBSD. There is quite a confusion between Unix and open source Unix-like operating systems such as Linux. Unix like OS also refer as UN*X or *nix OS are those behaved like UNIX OS following its standardization, basically, they derived from UNIX and sometimes developed as free and open source or proprietary. UNIX was developed at Bell Labs in Manhattan. Now, What is Solaris? Solaris is a SPARC (Scalable Processor Architecture) operating system based on UNIX and primarily developed by Sun Microsystem as a superior version to replace their earlier OS called SunOS. However, later in 2010, Oracle has accessed Sun Microsystem and till today Solaris is developed and maintained by Oracle under Oracle Solaris project. It is not completely open source and comes with some proprietary components means few parts are open source to the public and rest of closed such as Solaris kernel source code which apparently becomes closed source after Solaris 11. Well, Oracle Solaris latest version is 11.4 and available on Oracle website published approx. 9 months ago, still, there are some speculations on the Oracle’s Solaris roadmap i.e whether they will continue the development of it or not. However, there is no official news on it yet. Coming, to the main agenda of this article is how to downloads Oracle Solaris ISO or VM(OVA) to install on VirtualBox Virtual Machine. Installing Oracle solaris 11 in Virtualbox. A lot has been already said on Solaris 11 new features, its performance etc.. So, I just wanted get my hands dirty by testing the new Solaris 11. And what could be better than installing a Solaris 11 Virtual machine in virtual box. Here is how, you can also do it : Prerequisites : 1. A laptop with atleast 2 GB RAM and around 50 GB of disk space 2. Oracle virtualbox software. (download here) 3. Oracle Solaris 11.1 iso image ( sol-11_1-text-x86.iso ) Let us setup a virtualbox virtual machine with solaris 11. Open the virtualbox software and click on new. We need to name the new virtual machine and set the type/version as Solaris/Oracle Solaris 11 (64bit) Set the Memory of the virtual machine to atleast 1.5 GB for a optimum performance. We will be creating a new hard drive for the solaris 11 virtual machine. Now in case you want the virtual machine to be used in other virtualization softwares like VMware workstation etc., then select appropriate hard drive file type. I will be using the VM in virtualbox itself, so I am going to go with VDI (VirtualBox Disk Image) In case of a dynamically allocated hard drive file, space is filled only when some data is written to it. I usually prefer fixed size hard drive as it is faster than the other dynamically allocated hard drive. Name the HDD file we are going to create. You can also choose the location to store the hard disk file. I will be setting the size of hard disk as 10 GB. We are almost done with all the settings. There are few more settings to be done, so click on settings. We do not need audio device for the virtual machine , so disable it. We also do not need the USB ports, So disable the USB controller too. To be able to connect the Virtual machine from the host machine, select the bridged Adapter as the adapter 1 type and select the appropriate network hardware to be used from the host machine. I use Wi-Fi network in the host machine so I selected the Wi-Fi port. You may be using a ethernet card in host machine, so select it appropriately. For the first time boot of the virtual machine, we need to boot it from the solaris 11 text install ISO image. Select the ISO of solaris 11 and click start to start the installation. Select the default US-English keyboard layout and press enter. On the next screen select the default language as English and press enter. Select the option 1 to install the Oracle solaris 11. Now appears the Welcome screen of solaris 11. On this screen and all other screen we need to use ESC + 2 to go to the next screen. We will be installing solaris 11 on the local disk so select Local Disk as a discovery selection. The installer would discover the only hard disk we allocated for this installation. Select this hard drive and press ESC + 2. You can change the layout of the disk on the next screen. We would go with the default layout and use the entire disk. On the next screen give the hostname for the virtual machine (geeklab) and select manual configuration of the network configuration. As shown you can configure network automatically using the DHCP as well. But for this LAB let us use the manual configuration itself. Provide the IP address and netmask for the interface net0. (192.168.1.20/24) We do not need to use any DNS name service for this installation so select “Do not configure DNS”. Select “None” For the Alternate Name Service option. Now set the time zone according to your location. For me its india so I would choose Asia/India. Confirm the time settings and go to the next screen. On the next screen set the root password . here you can also create any additional users if you want. The enrollment for support is not required for this LAB setup so just go to next screens. Select a no proxy network configuration as we are not going to use any proxy settings to connect to the internet. Check the final installation summary and verify them to start the installation of Oracle Solaris 11. Now the installation would start which will not take more than 15 minutes. Once the installation is complete we need to reboot the OS. The key to reboot is ESC + 8 on this screen. Do remember to remove the ISO image from the virtual machine or else the installation would start again. The OS would reboot and you can see the latest Solaris 11.1 OS up and running. Enabling GNOME Graphical Desktop. Be default you won’t be able to use the graphical desktop in solaris 11. To enable the graphical desktop we need to add a package (solaris- desktop) from the IPS repository (refer Solaris 11 IPS series). After rebooting the Virtual Machine and you should see the Graphical Desktop. I hope the post was informative. Do subscribe to stay tuned to the latest happenings on the blog. How to Install Oracle Solaris 11 (Text Installer) You can install Oracle Solaris 11 by using either an interactive or an automated installation . With an interactive installation, you have two options: The LiveCD for x86-based systems A text installer that can be used on either x86 or SPARC machines. These options are designed for installing the OS on a single system, whereas the automated installation option (commonly known as the Automated Installer, or AI) provides a “hands-free” network installation on a single system or for multiple-client systems. System Requirements. Make sure the system has the below minimum requirements fulfilled, before beginning the installation of Solaris 11. Hardware Requirement Disk space Recommended minimum: 13 GB Memory Recommended minimum: 1 GB Architectures X86 : 64-bit only, SPARC : Oracle Solaris M-series and T-series systems only. Installing Oracle Solaris 11 Using an Interactive Installer (Text Install on x86 VM) For the purpose of this post, we will install Oracle Solaris 11 in an x86 VM machine. The process remains same while installing on SPARC based systems. To prepare for the installation, you first download and save the ISO image to your system. Select the ISO image as the boot media in Bios to begin the installation. On the First screen, you are prompted to select the keyboard layout and language. Select appropriate keyboard layout and language here and proceed. On next screen, you would see the text installer menu. The menu contains several options: Install Oracle Solaris : Allows you to install the operating system Install Additional Drivers : Allows you to install any device drivers that may be required to support the operating system Shell : Provides a shell; can be used to debug the installation Terminal type (currently sun-color) : Provides a means of displaying the text installer correctly in case the default terminal type doesn’t work Reboot : Enables you to reboot the system after the installation has completed. To initiate the installation, select option 1. The default, as indicated by the number 1 in brackets, is to install Oracle Solaris, so all you have to do is press Enter to continue. “Welcome to Oracle Solaris” Screen. This screen provides you with the temporary location of the installation log (/system/volatile/install_log) as well as instructions on how to navigate through the installer by using the function keys located at the bottom of the screen and the up and down arrow keys. To continue to the Disk screen, press the F2 function key. Selecting a Disk. From the Welcome screen, you are taken to the Disks screen, where you are prompted to select where you want Oracle Solaris to be installed. To select the highlighted disk and continue to the next screen, press F2. Selecting an Fdisk Partition. From the Disks screen, you are taken to the Fdisk Partitions (or the formatting disks) screen, where you can select to use a whole disk or to partition the disk. The “ Use the whole disk ” option is highlighted by default. Using the whole disk is highly recommended. To select this option and continue to the next screen, press F2. Selecting a Network. The next screen is the Network screen, where you provide a computer name and select the wired Ethernet network connection configuration (Automatically, Manually, or None). The Automatically option automatically configures the network connection for you. The Manually option enables you to manually configure the network connection by responding to the prompts presented on the subsequent screens. The None option tells the system that you do not want to configure the network at this time. To select one of these options, arrow down to Automatically, Manually, or None. When you have the desired option highlighted, press F2 to select it and continue. For this post example, you will manually configure the network. Manually Configuring the Network. The next screen prompts you for the IP address for the network interface. In this example, the network interface is net0. When you have entered the required information for your network configuration, press F2 to continue. DNS Name Service. The next screen provides you the opportunity to configure a DNS name service. To configure a DNS name service, select the first option. If you do not want to configure DNS, select the second option. In this example, you are not going to configure DNS. Alternate Name Service. The next screen enables you to select an alternate name service, such as LDAP or NIS. For this example, you are going to select None. Selecting the Time Zone: Regions. The next screen that appears is “ Time Zone: Regions “, where you select the region that contains the time zone that is appropriate to your installation. To make your selection, arrow down to the region and then press F2 to select it and continue. In this example, you are going to select Asia . Setting the Time Zone: Locations. The next screen is the Time Zone: Locations screen, where you select the location that contains the time zone that is appropriate to your installation. Again, to make your selection, arrow down to the location of your choice and then press F2 to select it and continue. In this example installation, India is selected for the location. Selecting the Time Zone. You next see the Time Zone screen. The selections presented on this screen are based on the region and location selections you made previously. To select the appropriate time zone, arrow down until your time zone is highlighted, and then press F2. To support the example installation, you select Asia/Kolkata . Setting the Date and Time. The “ Date and Time ” screen appears next. Review the information that is presented and edit it as required. Note that the time is in the 24-hour format. After you have made the necessary edits, press F2 to continue. Providing User Information. Next is the Users screen, where you enter your user information to include the system root password, your name, your username, and your user password. To continue, press F2. Reviewing Installation Summary. After completing the configuration data, you see the Installation Summary screen. Review the information carefully to make sure it is accurate before you start the installation. To start the installation, press F2. Monitoring the Installation. The Installing Oracle Solaris screen enables you to monitor the progress of the installation. The installation takes about 10 to 15 minutes to complete. Verifying the Installation. When the installation concludes, the Installation Complete screen appears. This screen provides you with access to the installation log and, an opportunity to verify that no error messages were generated and that all the major facilities installed successfully. You have the option of viewing the log at its /system/volatile/install_log location before rebooting by pressing F4. Alternatively, you can view the log at /var/sadm/system/logs/install_log after reboot. Rebooting the System. After you have verified that the installation was successful, you can reboot the system by pressing F8. If you press F9 to quit, you are returned to the text installer menu, where you can select option 5 to reboot the system.