AR82.10-P-1201EX Remove/install bulbs of unit 13.12.13

MODEL 207, 212 with CODE 615 (Bi-xenon headl. (LHD veh.) w. corn. function) MODEL 207, 212 with CODE 621 (Intelligent Light System (left-hand traffic)) MODEL 207, 212 with CODE 622 (Intelligent Light System (right-hand traffic)) MODEL 212 with CODE 614 (Bi-xenon headlamp unit) MODEL 212 with CODE 616 (Bi-xenon w. headlamp cornering fct.) MODEL 218 with CODE 614 (Bi-xenon headlamps for LHD vehicles) MODEL 218 with CODE 618 (Bi-xenon headlamps f. left-side dr. traffic)

Modification notes

10.12.13 "Read out operating counter and set to zero" added Operation step 1 AH82.10-P-1010-00A

P82.10-5889-09

Shown on MODEL 212, left front unit (E1) with CODE 610 (Night View Assist)

1 Housing cover E1 Left front lamp unit E2e9 Right cornering illumination 2 Housing cover E1e9 Left cornering illumination E2e10 Right xenon bulb with integrated ignition module 3 Cornering lights socket E1e10 Left xenon bulb with integrated E2e11 Right lamp ignition module 4 Electrical connector E1e11 Left infrared lamp 5 Electrical connector E2 Right front lamp unit

© Daimler AG, 2/25/18, B/02/18, ar82.10-p-1201ex, Remove/install bulbs of headlamp unit Page 1 of 3 MODEL 207, 212 with CODE 615 (Bi-xenon headl. (LHD veh.) w. corn. function) MODEL 207, 212 with CODE 621 (Intelligent Light System (left-hand traffic)) MODEL 207, 212 with CODE 622 ... Shown on MODEL 218, left front lamp unit (E1)

1 Housing cover 5 Electrical connector 6 Fastening spring E1 Left front lamp unit E2 Right front lamp unit E1e10 Left xenon bulb with integrated ignition module E2e10 Right xenon bulb with integrated ignition module

P82.10-6513-03

a Danger ! Risk of death due to high voltage in xenon Do not touch parts conducting high voltage. AS82.10-Z-0001-01A headlamps. Risk of explosion/risk of fire Persons with active electronic implants (e.g. caused by highly flammable materials in the cardiac pacemakers) must never work on vicinity of damaged xenon bulbs. Risk of xenon headlamps. Switch off the entire injury caused by UV light, hot components at system. Wear insulated safety shoes, safety xenon headlamps and glass splinters glasses and protective gloves. Remove highly produced by bursting xenon bulbs. Risk of inflammable materials from the hazard area. poisoning caused by inhalation of mercury Ensure sufficient ventilation in the working vapors and by toxic salts and mercury area. compounds being ingested or coming into contact with skin e d Remove/install 1 Read out operating counter i Notes on replacing xenon bulbs AH82.10-P-1010-00A a Connect STAR DIAGNOSIS and read out fault AD00.00-P-2000-04A memory i Installation: Set operating counter to zero. 2 Switch off exterior lights p Always switch off exterior lights before changing bulbs. Otherwise, a short circuit may occur. 3 Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit 4 Open service flap in left or right front axle MODEL 207 fender liner Only on xenon bulb with integrated ignition module (E1e10, E2e10). 5 Detach refrigerant line in area of left front lamp MODEL 212 unit (E1) Only on left xenon bulb with integrated ignition module (E1e10). i Removal: Until housing cover (1) is accessible. 6 Detach purging switchover valve in area of left MODEL 218 with ENGINE 157, 274, 276, 278 front lamp unit (E1) Only on left xenon bulb with integrated ignition module (E1e10). 7 Remove housing cover (1) Only on xenon bulb with integrated ignition module (E1e10, E2e10). 8 Remove housing cover (2) Only on cornering lights (E1e9, E2e9) or infrared lights (E1e11, E2e11). 9 Remove cornering light socket (3) and MODEL 207, 212 remove left cornering light (E1e9) or right cornering light (E2e9) from cornering light socket (3)

© Daimler AG, 2/25/18, B/02/18, ar82.10-p-1201ex, Remove/install bulbs of headlamp unit Page 2 of 3 MODEL 207, 212 with CODE 615 (Bi-xenon headl. (LHD veh.) w. corn. function) MODEL 207, 212 with CODE 621 (Intelligent Light System (left-hand traffic)) MODEL 207, 212 with CODE 622 ... p Do not touch the bulb with bare fingers; use a soft cloth free of oil and grease. Otherwise, the bulbs are damaged due to overheating. i Removal: Turn cornering light socket (3) approx. 30° counterclockwise. 10.1 Turn left xenon bulb with integrated ignition MODEL 207, 212 module (E1e10) or right xenon bulb with integrated ignition module (E2e10), then disconnect electrical connector (5) and remove xenon bulb with integrated ignition module (E1e10, E2e10) p Do not touch the bulb with bare fingers; use a soft cloth free of oil and grease. Otherwise, the bulbs are damaged due to overheating. p Carefully pull xenon bulb with integrated ignition module (E1e10, E2e10) out of reflector. Otherwise there is risk of breakage of the bulb. i Removal: Turn xenon bulb with integrated ignition module (E1e10, E2e10) approx. 30° counterclockwise. 10.2 Release fastening spring (6), remove left MODEL 218 xenon bulb with integrated ignition module (E1e10) or right xenon bulb with integrated ignition module (E2e10) from reflector and disconnect electrical connector (5) p Do not touch the bulb with bare fingers; use a soft cloth free of oil and grease. Otherwise, the bulbs are damaged due to overheating. p Carefully pull xenon bulb with integrated ignition module (E1e10, E2e10) out of reflector. Otherwise there is risk of breakage of the bulb. 11 Turn left infrared light (E1e11) or right infrared MODEL 212 with CODE 610 (Night View light (E2e11), disconnect electrical connector Assist) (4) and remove infrared light (E1e11, E2e11) p Do not touch the bulb with bare fingers; use a soft cloth free of oil and grease. Otherwise, the bulbs are damaged due to overheating. i Removal: Turn infrared light (E1e11, E2e11) approx. 30° counterclockwise. 12 Install in the reverse order

© Daimler AG, 2/25/18, B/02/18, ar82.10-p-1201ex, Remove/install bulbs of headlamp unit Page 3 of 3 MODEL 207, 212 with CODE 615 (Bi-xenon headl. (LHD veh.) w. corn. function) MODEL 207, 212 with CODE 621 (Intelligent Light System (left-hand traffic)) MODEL 207, 212 with CODE 622 ...