DOCSLIB.ORG

751 Part 15—Radio Frequency Devices

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
751 Part 15—Radio Frequency Devices Federal Communications Commission Pt. 15 least five (5) times the number of ques- 15.102 CPU boards and power supplies used tions required for a single examination. in personal computers. The FCC will issue public announce- 15.103 Exempted devices. ments detailing the questions in the 15.105 Information to the user. 15.107 Conducted limits. pool for each element. COLEMs must 15.109 Radiated emission limits. use only currently-authorized (through 15.111 Antenna power conduction limits for public notice or other appropriate receivers. means) question pools when preparing 15.113 Power line carrier systems. a question set for a written examina- 15.115 TV interface devices, including cable tion element. system terminal devices. 15.117 TV broadcast receivers. [73 FR 4479, Jan. 25, 2008] 15.118 Cable ready consumer electronics equipment. § 13.217 Records. 15.119 Closed caption decoder requirements Each COLEM recovering fees from for analog television receivers. examinees must maintain records of 15.120 Program blocking technology re- expenses and revenues, frequency of ex- quirements for television receivers. 15.121 Scanning receivers and frequency aminations administered, and exam- converters used with scanning receivers. ination pass rates. Records must cover 15.122 Closed caption decoder requirements the period from January 1 to December for digital television receivers and con- 31 of the preceding year and must be verter boxes. submitted as directed by the Commis- 15.123 Labeling of digital cable ready prod- sion. Each COLEM must retain records ucts. for 1 year and the records must be 15.124 DTV transition notices by manufac- made available to the FCC upon re- turers of televisions and related devices. quest. Subpart C—Intentional Radiators PART 15—RADIO FREQUENCY 15.201 Equipment authorization require- ment. DEVICES 15.202 Certified operating frequency range. 15.203 Antenna requirement. Subpart A—General 15.204 External radio frequency power am- plifiers and antenna modifications. Sec. 15.205 Restricted bands of operation. 15.1 Scope of this part. 15.207 Conducted limits. 15.3 Definitions. 15.209 Radiated emission limits; general re- 15.5 General conditions of operation. quirements. 15.7 [Reserved] 15.211 Tunnel radio systems. 15.9 Prohibition against eavesdropping. 15.212 Modular transmitters. 15.11 Cross reference. 15.213 Cable locating equipment. 15.13 Incidental radiators. 15.214 Cordless telephones. 15.15 General technical requirements. 15.17 Susceptibility to interference. RADIATED EMISSION LIMITS, ADDITIONAL 15.19 Labelling requirements. PROVISIONS 15.21 Information to user. 15.23 Home-built devices. 15.215 Additional provisions to the general 15.25 Kits. radiated emission limitations. 15.27 Special accessories. 15.217 Operation in the band 160–190 kHz. 15.29 Inspection by the Commission. 15.219 Operation in the band 510–1705 kHz. 15.31 Measurement standards. 15.221 Operation in the band 525–1705 kHz. 15.32 Test procedures for CPU boards and 15.223 Operation in the band 1.705–10 MHz. computer power supplies. 15.225 Operation within the band 13.110– 15.33 Frequency range of radiated measure- 14.010 MHz. ments. 15.227 Operation within the band 26.96–27.28 15.35 Measurement detector functions and MHz. bandwidths. 15.229 Operation within the band 40.66–40.70 15.37 Transition provisions for compliance MHz. with the rules. 15.231 Periodic operation in the band 40.66– 15.38 Incorporation by reference. 40.70 MHz and above 70 MHz. 15.233 Operation within the bands 43.71–44.49 Subpart B—Unintentional Radiators MHz, 46.60–46.98 MHz, 48.75–49.51 MHz and 49.66–50.0 MHz. 15.101 Equipment authorization of uninten- 15.235 Operation within the band 49.82–49.90 tional radiators. MHz. 751 VerDate Nov<24>2008 14:41 Dec 08, 2009 Jkt 217200 PO 00000 Frm 00761 Fmt 8010 Sfmt 8010 Y:\SGML\217200.XXX 217200 cprice-sewell on DSK2BSOYB1PROD with CFR § 15.1 47 CFR Ch. I (10–1–09 Edition) 15.237 Operation in the bands 72.0–73.0 MHz, 15.511 Technical requirements for surveil- 74.6–74.8 MHz and 75.2–76.0 MHz. lance systems. 15.239 Operation in the band 88–108 MHz. 15.513 Technical requirements for medical 15.240 Operation in the band 433.5–434.5 MHz. imaging systems. 15.241 Operation in the band 174–216 MHz. 15.515 Technical requirements for vehicular 15.242 Operation in the bands 174–216 MHz radar systems. and 470–668 MHz. 15.517 Technical requirements for indoor 15.243 Operation in the band 890–940 MHz. UWB systems. 15.245 Operation within the bands 902–928 15.519 Technical requirements for hand held MHz, 2435–2465 MHz, 5785–5815 MHz, 10500– UWB systems. 10550 MHz, and 24075–24175 MHz. 15.521 Technical requirements applicable to 15.247 Operation within the bands 902–928 all UWB devices. MHz, 2400–2483.5 MHz, and 5725–5850 MHz. 15.523 Measurement procedures. 15.249 Operation within the bands 902–928 15.525 Coordination requirements. MHz, 2400–2483.5 MHz, 5725–5875 MHz, and 24.0–24.25 GHz. Subpart G—Access Broadband Over 15.250 Operation of wideband systems with- Power Line (Access BPL) in the band 5925–7250 MHz. 15.251 Operation within the bands 2.9–3.26 15.601 Scope. GHz, 3.267–3.332 GHz, 3.339–3.3458 GHz, and 15.603 Definitions. 3.358–3.6 GHz. 15.605 Cross reference. 15.252 Operation of wideband vehicular 15.607 Equipment authorization of Access radar systems within the bands 16.2–17.7 BPL equipment. GHz and 23.12–29.0 GHz. 15.609 Marketing of Access BPL equipment. 15.253 Operation within the bands 46.7–46.9 15.611 General technical requirements. GHz and 76.0–77.0 GHz. 15.613 Measurement procedures. 15.255 Operation within the band 57–64 GHz. 15.615 General administrative requirements. 15.257 Operation within the band 92–95 GHz. Subpart H—Television Band Devices Subpart D—Unlicensed Personal 15.701 Scope. Communications Service Devices 15.703 Definitions. 15.705 Cross reference. 15.301 Scope. 15.706 Information to the user. 15.303 Definitions. 15.707 Permissible channels of operation. 15.305 Equipment authorization require- 15.709 General technical requirements. ment. 15.711 Interference avoidance mechanisms. 15.307 Coordination with fixed microwave 15.712 Interference protection requirements. service. 15.713 TV bands database. 15.309 Cross reference. 15.714 TV bands database administration 15.311 Labeling requirements. fees. 15.313 Measurement procedures. 15.715 TV bands database administrator. 15.315 Conducted limits. 15.717 TVBDs that rely on spectrum sens- 15.317 Antenna requirement. ing. 15.319 General technical requirements. 15.321 [Reserved] AUTHORITY: 47 U.S.C. 154, 302a, 303, 304, 307, 15.323 Specific requirements for devices op- 336, and 544a. erating in the 1920–1930 MHz sub-band. SOURCE: 54 FR 17714, Apr. 25, 1989, unless otherwise noted. Subpart E—Unlicensed National Information Infrastructure Devices Subpart A—General 15.401 Scope. 15.403 Definitions. § 15.1 Scope of this part. 15.405 Cross reference. (a) This part sets out the regulations 15.407 General technical requirements. under which an intentional, uninten- Subpart F—Ultra-Wideband Operation tional, or incidental radiator may be operated without an individual license. 15.501 Scope. It also contains the technical specifica- 15.503 Definitions. tions, administrative requirements and 15.505 Cross reference. other conditions relating to the mar- 15.507 Marketing of UWB equipment. keting of part 15 devices. 15.509 Technical requirements for ground penetrating radars and wall imaging sys- (b) The operation of an intentional or tems. unintentional radiator that is not in 15.510 Technical requirements for through accordance with the regulations in this D-wall imaging systems. part must be licensed pursuant to the 752 VerDate Nov<24>2008 14:41 Dec 08, 2009 Jkt 217200 PO 00000 Frm 00762 Fmt 8010 Sfmt 8010 Y:\SGML\217200.XXX 217200 cprice-sewell on DSK2BSOYB1PROD with CFR Federal Communications Commission § 15.3 provisions of section 301 of the Commu- functions as a CSTD in one of its oper- nications Act of 1934, as amended, un- ating modes must comply with the less otherwise exempted from the li- technical requirements for such de- censing requirements elsewhere in this vices when operating in that mode. chapter. (f) Carrier current system. A system, or (c) Unless specifically exempted, the part of a system, that transmits radio operation or marketing of an inten- frequency energy by conduction over tional or unintentional radiator that is the electric power lines. A carrier cur- not in compliance with the administra- rent system can be designed such that tive and technical provisions in this the signals are received by conduction part, including prior Commission au- directly from connection to the elec- thorization or verification, as appro- tric power lines (unintentional radi- priate, is prohibited under section 302 ator) or the signals are received over- of the Communications Act of 1934, as the-air due to radiation of the radio amended, and subpart I of part 2 of this frequency signals from the electric chapter. The equipment authorization power lines (intentional radiator). and verification procedures are de- (g) CB receiver. Any receiver that op- tailed in subpart J of part 2 of this erates in the Personal Radio Services chapter. on frequencies allocated for Citizens Band (CB) Radio Service stations, as § 15.3 Definitions. well as any receiver provided with a (a) Auditory assistance device. An in- separate band specifically designed to tentional radiator used to provide audi- receive the transmissions of CB sta- tory assistance to a handicapped per- tions in the Personal Radio Services.
Load more

Recommended publications
  • The Following Part 15 Regulations Contain All Updates and Changes Adopted and Released by the Commission As of July 10, 2008
    The following Part 15 regulations contain all updates and changes adopted and released by the Commission as of July 10, 2008. However, changes to the rules do not become effective until at least 30 days after they are published in the Federal Register. It is possible that recent changes to these rules may not have been published in the Federal Register and may not yet be effective. In addition, this version contains some directional notes, not themselves contained in the regulations. These directional notes are enclosed by brackets ([]). PART 15 - RADIO FREQUENCY DEVICES Subpart A - General Section 15.1 Scope of this Part. Section 15.3 Definitions. Section 15.5 General conditions of operation. Section 15.9 Prohibition against eavesdropping. Section 15.11 Cross reference. Section 15.13 Incidental radiators. Section 15.15 General technical requirements. Section 15.17 Susceptibility to interference. Section 15.19 Labelling requirements. Section 15.21 Information to user. Section 15.23 Home-built devices. Section 15.25 Kits. Section 15.27 Special accessories. Section 15.29 Inspection by the Commission. Section 15.31 Measurement standards. Section 15.32 Test procedures for CPU boards and computer power supplies. Section 15.33 Frequency range of radiated measurements. Section 15.35 Measurement detector functions and bandwidths. Section 15.37 Transition provisions for compliance with the rules. Section 15.38 Incorporations by reference. Subpart B - Unintentional Radiators Section 15.101 Equipment authorization of unintentional radiators. Section 15.102 CPU boards and power supplies used in personal computers. Section 15.103 Exempted devices. Section 15.105 Information to the user.
    [Show full text]
  • Guide to Wireless Regulations in the United States
    Guide to Wireless Regulations in the United States Table of Contents 1 The FCC Road Part 15: From Concept to Approval 5 The Approval Process 9 Considerations for Operation within the 260–470MHz Band 15 Considerations for Operation within the 902–928MHz Band 19 Frequently Asked Questions 23 Contacting the FCC 25 CFR 47 Part 2 (Abridged) 85 CFR Part 15 (Abridged) 149 FCC-Approved Domestic Test Facilities 158 Power Conversion Table for 50Ω System The FCC Road Part 15: From Concept to Approval Introduction Many manufacturers have avoided making their products wireless because of uncertainty over the approval and certification process. While it is true that RF increases the effort and cost of bringing a product to market, it also can add significantly to the function and salability of a completed product. Thanks to a growing number of easily applied radio frequency (RF) devices such as those offered by Linx, manufacturers are now able to quickly and reliably add wireless functionality to their products. The issue of legal compliance for the finished product is straightforward when approached in logical steps. Purpose of this Application Note This application note gives a brief overview of the legal issues governing the manufacture and sale of RF products intended for unlicensed operation in the United States under CFR 47 Part 15. In the United States the Federal Communications Commission (FCC) is responsible for the regulation of all RF devices. The FCC requires any device that radiates RF energy to be tested for compliance with FCC rules. These rules are contained in the Code of Federal Regulations (CFR), Title 47.
    [Show full text]
  • BPL) SYSTEMS to FEDERAL GOVERNMENT RADIOCOMMUNICATIONS at 1.7 - 80 Mhz
    NTIA Report 04-413 POTENTIAL INTERFERENCE FROM BROADBAND OVER POWER LINE (BPL) SYSTEMS TO FEDERAL GOVERNMENT RADIOCOMMUNICATIONS AT 1.7 - 80 MHz Phase 1 Study VOLUME I technical report U.S. DEPARTMENT OF COMMERCE National Telecommunications and Information Administration NTIA Report 04-413 POTENTIAL INTERFERENCE FROM BROADBAND OVER POWER LINE (BPL) SYSTEMS TO FEDERAL GOVERNMENT RADIOCOMMUNICATIONS AT 1.7 - 80 MHz Phase 1 Study VOLUME I U.S. Department of Commerce Donald Evans, Secretary Michael D Gallagher, Acting Assistant Secretary For Communications and Information APRIL 2004 ACKNOWLEDGEMENTS The measurements and studies underlying this report were performed by NTIA’s Spectrum Engineering and Analysis Division (SEAD) and Institute for Telecommunications Science (ITS). The following NTIA personnel contributed substantially to this report and the underlying studies: Brent Bedford (ITS lead) ITS Gary Patrick SEAD Ernesto Cerezo SEAD Alakananda Paul (tech. lead) SEAD Nick DeMinco ITS James Richards (admin. lead) SEAD Ed Drocella SEAD Robert Sole SEAD Phil Gawthrop SEAD Thomas Sullivan SEAD Randall Hoffman ITS Clement Townsend SEAD Gerald Hurt SEAD Cecilia Tucker SEAD Bernard Joiner SEAD Cou-Way Wang SEAD Yeh Lo ITS Jonathan Williams SEAD Norman Maisel SEAD Robert Wilson SEAD NTIA is grateful for the cooperation provided by the BPL parties whose systems were subject to measurement. NTIA also greatly appreciates the equipment, special radio network access and radio operator support provided by the Department of Homeland Security for NTIA’s testing of BPL interference. Finally, NTIA would like to thank the Interdepartment Radio Advisory Committee (IRAC) for its review of this report and the inputs it provided. iii PREFACE This Report contains two Volumes.
    [Show full text]
  • LM072 Class 1 Bluetooth Serial Data Module Part No: 072-0125 for BT2.0 F/W Part No: 072-0110 for BT2.1 F/W Datasheet Rev1.2/11-07-12
    Product: LM072 LM072 Class 1 Bluetooth Serial Data Module Part No: 072-0125 for BT2.0 F/W Part No: 072-0110 for BT2.1 F/W Datasheet Rev1.2/11-07-12 1 General Description LM072 is LM Technologies Ltd Class 1 Bluetooth Data module with external antenna. This module is a CSR Bluecore 4 (BC04) chip based surface mount module available with Bluetooth Serial Port Profile (SPP) firmware. This module is ideal for adding long range wireless connectivity to embedded products. The module acts as a standalone unit (i.e. it does not need a host to drive it) and can interface with embedded microcontrollers via UART. It operates over a voltage range of 3.0 V to 3.6 V and gives excellent performance over a distance of 70-100 m with external antenna. This is a tried and tested module also used in other LM best selling products like LM048 and LM058 serial adapter as well as LM400 and LM410 Data Modules. This module is available with Bluetooth 2.0+EDR as well as Bluetooth 2.1+EDR compliant SPP firmware. 2 Features 3 Applications • Serial Communications • Bluetooth v2.0 + EDR and v2.1 + EDR compliant firmware available • Medical Devices • Class 1 radio - Output power +18 dBm • Domestic and Industrial Applications • 100 m range in open space • Embedded Devices • Secure Simple Pairing supported (in Bluetooth 2.1 + EDR firmware) • Remote Monitoring and Control • 3V - 3.6V operation • Payment Terminals • Full Bluetooth EDR data rate of upto 3 Mbps supported • GPS, POS, Barcode Readers • Interface : UART (upto 921600 bps), PIO • Multipoint firmware support • SPP firmware supported by default.
    [Show full text]
  • KDB 178919 D01 Permissive Change Policy V06
    North American Regulatory Framework William H. Graff TCB Global Program Manager Chairman of the TCB Council March 2019 Equipment Authorization – RF Device Definition What is an RF Device? • The FCC regulates radio frequency (RF) devices contained in electronic and electrical products that are capable of emitting radio frequency energy by radiation, conduction, or other means. These products have the potential to cause interference to radio services operating in the radio frequency range of 9 kHz to 3000 GHz. Legal Definition: • A radiofrequency device is any device which in its operation is capable of emitting radiofrequency energy by radiation, conduction, or other means. Radiofrequency devices include, but are not limited to: a. Radio Transmitting devices used for Communication (Licensed and Unlicensed). b. Incidental, Unintentional and Intentional radiators defined in (Part 15). c. Industrial, Scientific, and Medical equipment (Part 18). d. Any part or component thereof which in use emits radiofrequency energy by radiation, conduction, or other means. [35 FR 7898, May 22, 1970, as amended at 54 FR 17711, Apr. 25, 1989] Regulatory Players Frequency Allocation • Radio spectrum allocation, regulatory responsibility for the radio spectrum is divided between the Federal Communications Commission (FCC) and the National Telecommunications and Information Administration (NTIA). • Currently only frequency bands between 9 kHz and 275 GHz have been allocated (i.e., designated for use by one or more terrestrial or space radiocommunication services or the radio astronomy service under specified conditions). • OET maintains the FCC's Table of Frequency Allocations, which is a compilation of allocations. • The FCC's Table of Frequency Allocations consists of the International Table of Frequency Allocations and the United States Table of Frequency Allocations.
    [Show full text]
  • Sengled Zigbee Module Model: ZM002 Introduction Model ZM002 Is a Zigbee Module
    Sengled Zigbee Module Model: ZM002 Introduction Model ZM002 is a zigbee module. The wireless communication part of the product is based on ZigBee Compliant Platform ,CustomNodes EFR32MG13P732F512IM32-C technology, which are fully integrated System-on-Chips that integrate a 2.4 GHz, IEEE 802.15.4-2003-compliant transceiver, 32-bit ARM® Cortex™-M4 microprocessor, flash and RAM memory, and peripherals of use to designers of ZigBee-based systems. Product Name: Sengled Zigbee Module Hardware V3 Version: Software V18 Version: Device Operating Configurations: Operating 2.4 GHz IEEE 802.15.4 Mode(s): Supporting IEEE 802.15.4 Mode(s): Test O-QPSK Modulation: Mode Tx (MHz) Rx (MHz) Frequency 2.4 GHz IEEE Range: 802.15.4 2400 ~ 2483.5 2400 ~ 2483.5 B.HF crystal OSC A high frequency crystal oscillator (HFXO) with integrated load capacitors, tunable in small steps, provides a precise timing refer- ence for the MCU. Crystal frequencies in the range from 38 to 40 MHz are supported. An external clock source such as a TCXO can also be applied to the HFXO input for improved accuracy over temperature. C.Power supply circuit The AC 100-130V power is converted to DC 3.3V and feeds to the whole zigbee module. The 2.1-3.6 V with internal 1.8 V regulators DC is used by the EFR32MG13 as the input power . D.Antenna The EFR32MG13 family includes devices which support both single-band and dual-band RF communication over separate physical RF interfaces. The 2.4 GHz antenna interface consists of two pins (2G4RF_IOP and 2G4RF_ION) that interface directly to the on-chip BALUN.
    [Show full text]
  • 896810 D01 Sdoc V02.Pdf
    Federal Communications Commission Office of Engineering and Technology Laboratory Division December 20, 2019 SUPPLIER’S DECLARATION OF CONFORMITY GUIDANCE 1. INTRODUCTION Supplier’s Declaration of Conformity (SDoC) is an FCC equipment authorization procedure that requires the party responsible for compliance to ensure that the equipment complies with the appropriate technical standards.1 The responsible party is not required to file an equipment authorization application with the Commission or a TCB; therefore, equipment approved under the SDoC procedure is not listed in any Commission database. However, the responsible party must provide a test report and other information demonstrating compliance with the rules upon request by the Commission.2 For any equipment subject to the SDoC procedure (see Clause 2, Appendix B, and Appendix C), the certification equipment authorization procedure may be used in place of the SDoC procedure at the option of the responsible party.3 The key FCC rule sections for SDoC are: • Section 2.906 Supplier’s Declaration of Conformity • Section 2.909 Responsible party • Section 2.931 Responsibilities • Section 2.938 Retention of records • Section 2.1072 Limitation on Supplier’s Declaration of Conformity • Section 2.1074 Identification • Section 2.1077 Compliance information 1 The Commission has two equipment authorization procedures: (1) Supplier’s Declaration of Conformity (SDoC); and (2) certification. Certification is an equipment authorization, using a third-party FCC-recognized Telecommunication Certification Body (TCB), based on an evaluation of supporting documentation and test data contained in an application submitted by the responsible party (e.g., the manufacturer or importer) to the TCB. Compliance testing for certification is performed by an FCC-recognized accredited testing laboratory.
    [Show full text]
  • 878 Subpart E—Internet Browsers Built Into Telephones Used With
    § 14.37 47 CFR Ch. I (10–1–20 Edition) (d) The complainant may file and 619, or parts 6, 7, or 14 of this chapter, serve a reply. The reply shall: shall be governed by the formal com- (1) Be served on the Commission and plaint rules in subpart E of part 1, the manufacturer or service provider §§ 1.7201.740. that is subject of the complaint within (a) Pleadings must be clear, concise, ten days after service of answer, unless and explicit. All matters concerning a otherwise directed by the Commission; claim, defense or requested remedy, in- (2) Be responsive to matters con- cluding damages, should be pleaded tained in the answer and shall not con- fully and with specificity. tain new matters. (b) Pleadings must contain facts which, if true, are sufficient to con- § 14.37 Review and disposition of in- stitute a violation of the Act or Com- formal complaints. mission order or regulation, or a de- (a) The Commission will investigate fense to such alleged violation. the allegations in any informal com- (c) Facts must be supported by rel- plaint filed that satisfies the require- evant documentation or affidavit. ments of § 14.34(b) of this subpart, and, (d) Legal arguments must be sup- within 180 days after the date on which ported by appropriate judicial, Com- such complaint was filed with the Com- mission, or statutory authority. mission, issue an order finding whether (e) Opposing authorities must be dis- the manufacturer or service provider tinguished. that is the subject of the complaint violated section 255, 716, or 718 of the (f) Copies must be provided of all Act, or the Commission’s imple- non-Commission authorities relied menting rules, and provide a basis upon which are not routinely available therefore, unless such complaint is re- in national reporting systems, such as solved before that time.
    [Show full text]
  • FCC 47CFR Part 15
    The following Part 15 regulations contain all updates and changes made by the Commission as of April 16, 1999. In addition, this version contains some directional notes, not themselves contained in the regulations. These directional notes are enclosed by brackets ([]). PART 15 - RADIO FREQUENCY DEVICES Subpart A - General Section 15.1 Scope of this Part. Section 15.3 Definitions. Section 15.5 General conditions of operation. Section 15.7 Special temporary authority. Section 15.9 Prohibition against eavesdropping. Section 15.11 Cross reference. Section 15.13 Incidental radiators. Section 15.15 General technical requirements. Section 15.17 Susceptibility to interference. Section 15.19 Labelling requirements. Section 15.21 Information to user. Section 15.23 Home-built devices. Section 15.25 Kits. Section 15.27 Special accessories. Section 15.29 Inspection by the Commission. Section 15.31 Measurement standards. Section 15.32 Test procedures for CPU boards and computer power supplies. Section 15.33 Frequency range of radiated measurements. Section 15.35 Measurement detector functions and bandwidths. Section 15.37 Transition provisions for compliance with the rules. Subpart B - Unintentional Radiators Section 15.101 Equipment authorization of unintentional radiators. Section 15.102 CPU boards and power supplies used in personal computers. Section 15.103 Exempted devices. Section 15.105 Information to the user. Section 15.107 Conducted limits. Section 15.109 Radiated emission limits. Section 15.111 Antenna power conducted limits for receivers. Section 15.113 Power line carrier systems. Section 15.115 TV interface devices, including cable system terminal devices. Section 15.117 TV broadcast receivers. Section 15.118 Cable ready consumer electronics equipment.
    [Show full text]
  • KLMKBM-01 Bluetooth Module Instructions
    KLMKBM-01 Bluetooth module instructions Ble mesh Version update instructions No. Date Content Version 1 2021-05-08 New document V1.0.0 2 3 Catalogue 1 Product description ................................................................................................................. 4 2 Performance characteristics ................................................................................................. 4 2.1 main feature ................................................................................................................... 4 3 Module interface ....................................................................................................................... 4 3.1 Size package ................................................................................................................... 4 3.2 Pin definition ............................................................................................................... 5 4 Electrical parameters ............................................................................................................. 6 4.1 Absolute electrical parameters ............................................................................... 6 4.2 Working conditions ....................................................................................................... 6 4.3 Power consumption in working mode ......................................................................... 7 5 RF parameters ............................................................................................................................
    [Show full text]
  • STATE of NEW YORK PUBLIC SERVICE COMMISSION Albany, New York
    Before the STATE OF NEW YORK PUBLIC SERVICE COMMISSION Albany, New York In the Matter of 1 1 Proceeding on Motion of the Commission to ) CASE 06-M-0043 Examine Issues Related to the Deployment of ) Broadband Over Power Line Technologies ) To: The Commission, c/o Jaclyn A. Brilling, Secretary Three Empire State Plaza Albany, New York 12223-1350 COMMENTS OF ARRL, THE NATIONAL ASSOCIATION FOR AMATEUR RADIO ARRL, the National Association for Amateur Radio, also known as the American Radio Relay League, Incorporated (ARRL), by its General Counsel and pursuant to the Order Initiating Proceeding and Inviting Comments (the Order) in the above-captioned proceeding, hereby respectfully submits its comments in response thereto. The Order was issued and effective January 25,2006, and called for comments to be filed not later than 45 days after the date of issuance. Therefore, these comments are timely filed. In response to the issues raised in the Order, ARRL states as follows: 1. ARRL is a Connecticut non-profit association, and is the principal representative throughout the United States of individuals who are Amateur Radio operators. ARRL has a nationwide membership of more than 140,000 licensees of the Federal Communications Commission (FCC) in the Amateur Radio Service. Amateur Radio is an avocation which is intended to promote and encourage technical self-training in telecommunications; foster international goodwill; and to provide disaster relief and emergency communications on a noncommercial, non-pecuniary basis. It is comprehensively regulated by the Federal Communications Commission. Licensees have demonstrated skill in telecommunications theory and practice through examinations. In times of natural or other disasters or emergencies, whether local or regional, Amateur Radio operators respond reliably and provide trained interoperability and other communications for public safety and disaster relief agencies, and assist in restoring communications systems that are damaged or overloaded.
    [Show full text]
  • IEEE Standards 22 Committee Participants to Reproduce This Document for Purposes of International Standardization 23 Consideration
    IEEE P C63.4rev/D1.05, 30 April 2012 1 C63.4rev/D1.05 2 Draft American National Standard for 3 Methods of Measurement of Radio- 4 Noise Emissions from Low-Voltage 5 Electrical and Electronic Equipment 6 in the Range of 9 kHz to 40 GHz 7 Sponsored by the 8 Accredited Standards Committee C63®²Electromagnetic Compatibility 9 accredited by the American National Standards Institute 10 11 Institute of Electrical and Electronics Engineers, Inc., Secretariat C63® 12 Approved <XX MONTH 20XX> 13 American National Standards Institute 14 15 Copyright © 2012 by the Institute of Electrical and Electronics Engineers, Inc. 16 Three Park Avenue 17 New York, New York 10016-5997, USA 18 All rights reserved. 19 This document is an unapproved draft of a proposed IEEE Standard. As such, this document is subject to 20 change. USE AT YOUR OWN RISK! Because this is an unapproved draft, this document must not be 21 utilized for any conformance/compliance purposes. Permission is hereby granted for IEEE Standards 22 Committee participants to reproduce this document for purposes of international standardization 23 consideration. Prior to adoption of this document, in whole or in part, by another standards development 24 organization, permission must first be obtained from the IEEE Standards Association Department 25 ([email protected]). Other entities seeking permission to reproduce this document, in whole or in part, must 26 also obtain permission from the IEEE Standards Association Department. 27 IEEE Standards Association Department 28 445 Hoes Lane 29 Piscataway, NJ 08854, USA 30 Copyright © 2012 IEEE. All rights reserved. This is an unapproved IEEE Standards Draft, subject to change.
    [Show full text]