MW-3232 / Engine Dynamometer
Example Model Shown (Image may not depict all standard included components)
MW-3232 Eddy Current Dynamometer
Specifications Recommended Accessories Power: 2,000 hp (1,491 kW) • Driveshaft - 1910 Max Torque at Base Speed: 10,504 lb-ft (14,242 Nm) • Torsional Coupling - 1910 Base Speed: 1,000 rpm • Flywheel Adapter Plate Kit Max. Speed: 3,000 rpm • Driveshaft Guard Construction Type: Dry Gap • Sub-Base Kit Rotor Inertia: 4,646 lb-ft2 (195.78 kg-m2) • Engine Cart Coolant Required at Max. Power: 200 gpm (757 lpm) • Air or Electric Starter Coolant Inlet (Min-Max): 55-100 psi (378-689 kPa) • Engine Cooling Column Coolant Inlet Temperature Max: 90°F (32.2°C) • Charge Air Cooler Shipping Weight (estimate): 18,000 lb (8,165 kg) • Water Recirculating System Companion Flange / Hub Pattern: 1910 - US Customary Coil Voltage / Hot Amperage: 250V / 7.82 amps Rotation: bi-directional For overhung loads, such as a belt or gear drive, please contact Dyne Systems to ensure that the system will meet the required performance needs.
3602 West Wheelhouse Road, Milwaukee,Everything Wisconsin U.S.A. you need to succeed www.taylordyno.com 414-755-0040 Optional Accessories
Optional Manual Optional Closed Loop Optional Charge Shaft Lock Cooling Center Air Cooler
Optional Driveshaft Guard Optional Engine Cart
Various Facility Support Systems and Services Available
Bulk Fuel Storage Coolant Storage Water Design, Project Commissioning, and Distribution and Distribution Recirculation & Construction Start-up & Training Management Services
(414) 755-0040 www.dynesystems.com 2 MW-3232 (US Customary) 12000 3000
11000 2750
10000 2500
9000 2250
8000 2000
7000 1750
6000 1500 Power (hp) Power Torque (lb-ft) Torque 5000 1250
4000 1000
3000 750
2000 500
1000 250
0 0
Speed (rpm)
Torque Power
MW-3232 (S.I.) 16000 4000
15000 3750
14000 3500
13000 3250
12000 3000
11000 2750
10000 2500
9000 2250
8000 2000
7000 1750 Torque (NM) Torque Power (kW) Power
6000 1500
5000 1250
4000 1000
3000 750
2000 500
1000 250
0 0
Speed (rpm)
Torque Power
(414) 755-0040 www.dynesystems.com 3 Standard Included Components Load Cell and Linkage Cooling Safety Package Calibration Arm Calibration Weight Hanger Companion Flange / Hub Pattern 1910 - US Customary Shaft End Guard Magnetic Pickup and 60-tooth Gear
As a safety precaution, Dyne Systems recommends a torsional analysis to uncover any potential torsional problems that exist for each application. This analysis will identify any torsional issues (frequencies) that should be fixed prior to operation. Excessive linear vibration may also create problems that must be mitigated for continued operation. It is the customer’s responsibility to ensure that these vibration issues are addressed upon application of the dynamometer. Equipment failures attributed to linear or torsional vibration are not warrantable.
Everything you need to succeed
aylor Dyne Systems is a division of Taylor Dynamometer Dynamometer (414) 755-0040 www.dynesystems.com DS2335v003