TOYOTA REAR COMPARTMENT LOCKS
General information as follows:
1. Key blank references are for the profile only, using one of the more well-known blank numbers. This list does not include all variations of different head shapes, lengths, or transponders, the main object is to identify which key profile enters the lock.
2. Locks are only available coded with keys unless noted otherwise.
3. Identify which tumblers and keying kits to use according to the separate chart organized by the key blank numbers.
4. Items marked DWO are discontinued when out. The part numbers are listed for the benefit of those who already have stock.
5. Note also that there are some applications where it will not be possible to rekey to the original car key because either the tumblers or the lock with the exact keyway are no longer available. We try to provide as much as possible to at least get the car back in service for the owner even if matching the original key is not possible. Be sure to read all the way through the notes for information to help you do as much as possible to service your customer using parts that are still available.
Model Years Key Part description Part no. Notes 4-Runner 1984-89 TR33 Complete lock B-30-114 Use face cap P-30-210 Coded lock B-30-143 Reuse the original switch or use B-30-518 (DWO) complete lock with switch 4-Runner 1990-91 TR40 Complete lock B-30-518 Use face cap P-30-217 with switch (DWO) 4-Runner 1992-95 TR40 Complete lock B-30-143 Use face cap P-30-217 TR47 4-Runner 1996-98 Complete lock B-30-161 8-cut TR47 4-Runner 1999-02 Complete lock B-30-531 8-cut TR47 4-Runner 2003-07 Complete lock B-30-570 Use face cap P-30-266 10-cut TR47 Complete lock Complete lock Avalon 1995-97 B-30-155 B-30-156 8-cut no keyless entry with keyless entry Complete lock B-30-542 no keyless entry TR47 Avalon 1998-99 Complete lock Complete lock 8-cut with keyless entry B-30-544 with keyless entry B-30-543 no factory alarm with factory alarm TR47 Complete lock Complete lock B-30-533 Avalon XL 2000-04 B-30-534 8-cut no keyless entry with keyless entry (DWO) TR47 Avalon XLS 2000-04 Complete lock B-30-535 8-cut Avalon 2005-19 Remote release only, no lock cylinder Camry B-30-225 The original pawl must be reused 1983-86 TR37 Uncoded service pack hatchback (B-30-125) Use face cap P-30-271 Camry sedan 1983-86 TR37 Complete lock B-30-127 Use face cap P-30-271 Note that some old stock in distributor warehouses may be assembled with Camry sedan 1987-91 TR37 Uncoded service pack B-30-129 keys, all new stock is unassembled and the original pawl must be reused. Use face cap P-30-271 for assembled locks and original locks on the car. Camry wagon 1987-91 TR37 Complete lock B-30-137 TR47 Camry sedan 1992-96 Complete lock B-30-139 8-cut TR47 Camry wagon 1992-96 Complete lock B-30-138 8-cut TR47 Complete lock Complete lock Use face cap P-30-266 Camry 1997-99 B-30-154 B-30-158 8-cut no alarm switch with alarm switch TR47 Complete lock B-30-537 Complete lock Use face cap P-30-266 Camry 2000-01 B-30-538 8-cut no alarm switch (DWO) with alarm switch TR47 Complete lock B-30-562 Complete lock Use face cap P-30-266 Camry 2002-06 B-30-563 10-cut XLE trim level (DWO) LE, SE trim level
Scroll down for more TOYOTA REAR COMPARTMENT LOCKS
TR47 Camry 2007-19 Replacement locks available from Toyota dealers only, most models have remote release only. 10-cut Camry Solara All see Solara Replacement locks available from Toyota dealers only Carina 1972-73 TR33
Celica 1970-74 TR33 Complete lock B-30-121 Use face cap P-30-201 Celica coupe 1975-79 TR33 Complete lock B-30-501 Use face cap P-24-203 (previously available as P-30-202) B-30-507 Celica liftback 1975-77 TR33 Complete lock (DWO) B-30-504 Celica liftback 1978-79 TR33 Complete lock Use face cap P-24-203 (previously available as P-30-202) (DWO) B-30-504 Celica coupe 1980-81 TR33 Complete lock Use face cap P-24-203 (previously available as P-30-202) (DWO) Celica liftback 1980-81 TR33 Complete lock B-30-501 Use face cap P-24-203 (previously available as P-30-202) Celica coupe 1982-85 TR33 Complete lock B-30-109 Use face cap P-30-201 Celica liftback 1982-85 TR33 Complete lock B-30-108 Use face cap P-30-201 Celica coupe 1986-89 TR33 Complete lock B-30-128 Use face cap P-30-271 1986 to B-30-164 Celica liftback TR39 Complete lock Use face cap P-30-217 4/86 (DWO) B-30-165 Celica liftback 5/86-89 TR39 Complete lock Use face cap P-30-217 (DWO) Celica coupe 1990-93 TR40 Complete lock B-30-144 Celica liftback 1990-93 TR39 Complete lock B-30-170 TR47 B-30-160 Celica coupe 1994-99 Complete lock 8-cut (DWO) TR47 Celica liftback 1994-99 Complete lock B-30-152 8-cut TR47 Celica 2000-05 8-cut or Complete lock B-30-536 10-cut Coded lock slanted grooves for B-30-121 Use face cap P-30-201 Corolla except retaining clip 1970-74 TR33 station wagon Coded lock straight grooves for B-30-122 Use face cap P-30-201 retaining clip Corolla 1970-74 TR25 Replacement locks available from Toyota dealers only station wagon Corolla KE30, KE35, KE50, 1975-79 TR33 Complete lock B-30-121 Use face cap P-30-201 TE31 sedan 2-door & 4-door Corolla TE37 1975-79 TR33 Complete lock B-30-528 Use face cap P-24-203 (previously available as P-30-202) 2-door hardtop Corolla TE51 1975-79 TR33 Complete lock B-30-529 Use face cap P-24-203 (previously available as P-30-202) 2-door coupe Corolla TE51 1975-79 TR33 Complete lock B-30-121 Use face cap P-30-201 hatchback Corolla station 1975-79 TR25 Complete lock B-30-101 wagon Corolla coupe B-30-502 1980-82 TR33 Complete lock Use face cap P-30-201 2-door (DWO) Corolla coupe 1983 TR33 Complete lock B-30-503 Use face cap P-30-201 2-door Corolla hardtop Complete lock 1980-83 TR33 B-30-123 2-door turn knob design Corolla hardtop Complete lock 1982 TR33 B-30-175 Use face cap P-30-201 2-door no turn knob Corolla hardtop Complete lock 1983 TR33 B-30-176 Use face cap P-30-201 2-door no turn knob Corolla liftback B-30-502 1980-82 TR33 Complete lock Use face cap P-30-201 3-door (hatch.) (DWO) Corolla liftback 1983 TR33 Complete lock B-30-503 Use face cap P-30-201 3-door (hatch.) Corolla sedan Complete lock 1980-83 TR33 B-30-123 4-door turn knob design Corolla sedan Complete lock 1983 TR33 B-30-176 Use face cap P-30-201 4-door no turn knob Corolla 1980-82 TR25 Complete lock B-30-102 station wagon Corolla station 1983 TR25 Complete lock B-30-103 wagon The original pawl must be reused Uncoded service pack B-30-226 Corolla coupe Use face cap P-30-271 1984-85 TR33 (2-door) Complete lock B-30-513 Use face cap P-30-271 including pawl
Scroll down for more TOYOTA REAR COMPARTMENT LOCKS
Coded lock The original pawl must be reused Corolla coupe B-30-131 1986-87 TR33 without pawl Use face cap P-30-271 (2-door) Complete lock B-30-515 Use face cap P-30-271 Corolla The original pawl must be reused Uncoded service pack B-30-226 hatchback Use face cap P-30-271 (3 door liftback) 1984-87 TR33 except Complete lock B-30-514 Use face cap P-30-271 Corolla FX Coded lock The original pawl may need to be reused on some cars. Corolla B-30-113 (no turn knob) Use face cap P-30-214 hatchback 1984-87 TR33 Complete lock (5 door liftback) B-30-167 (with turn knob) Complete lock for cars without inside B-30-126 Use face cap P-30-271 trunk lid release lever Corolla sedan Complete lock for 1984-87 TR33 (4-door) cars with inside trunk B-30-131 Use face cap P-30-271 lid release lever Complete lock B-30-140 with turn knob Corolla FX 1987-88 TR33 Complete lock B-30-147 Use face cap P-30-262 Lock service package The original pawl must be reused B-30-133 Corolla coupe without pawl Use face cap P-30-217 1988-92 TR33 (2-door) Complete lock B-30-517 Use face cap P-30-217 including pawl Complete lock for NOTE: B-30-133 can be substituted for B-30-132 even though the function B-30-132 cars without inside is slightly different. (B-30-132 cannot be substituted for B-30-133) (DWO) Corolla sedan trunk lid release lever Use face cap P-30-217 1988-92 TR40 (4-door) Complete lock for Reuse the original pawl or use no. P-30-329 cars with inside trunk B-30-133 Use face cap P-30-217 lid release lever Corolla wagon B-30-525 1988-92 TR39 Complete lock 2-wheel drive (DWO) Corolla station wagon 4-wheel 1988-92 TR40 Complete lock B-30-136 Use face cap P-30-263 drive (Alltrac) TR47 Corolla sedan 1993-97 Uncoded service pack B-30-134 Use face cap P-30-220 8-cut Corolla 1993-97 TR53 Complete lock B-30-151 Use tumbler series P-30-191/198 station wagon TR47 Corolla 1998-02 Complete lock B-30-174 8-cut TR47 Corolla 2003-07 Complete lock B-30-571 Use face cap P-30-268 10-cut Corona except 1970-73 TR33 Replacement locks available from Toyota dealers only station wagon Corona 1970-73 TR33 Replacement locks available from Toyota dealers only station wagon Corona except Complete lock Complete lock B-30-506 1974-78 TR33 B-30-505 station wagon 4-door sedan 2-door hardtop (DWO) Corona station 1974-78 TR25 Complete lock B-30-168 wagon Corona except Complete lock Complete lock Use face cap P-30-201 1979-82 TR33 B-30-176 B-30-510 station wagon 4-door sedan 5-door liftback NOTE: The original face cap must Corona Complete lock Complete lock B-30-169 1979-82 TR25 B-30-172 be removed carefully and reused, station wagon 1979 only 1980-82 (DWO) replacement caps are not available Reuse the original pawl or use B-30-508 or B-30-509 listed below Lock service package B-30-119 Cressida Use face cap P-30-201 1978-80 TR33 sedan & coupe Complete lock Complete lock Use face cap P-30-201 B-30-508 B-30-509 1978 1979-80 Cressida 1981-84 TR33 Complete lock B-30-119 Use face cap P-30-201 sedan & coupe Cressida 1978 TR25 Replacement locks available from Toyota dealers only station wagon Cressida 1979-80 TR25 Complete lock B-30-105 station wagon Cressida 1978-84 TR25 Complete lock B-30-106 station wagon Cressida sedan 1985 TR37 Complete lock B-30-120 Use face cap P-30-271 Complete lock B-30-130 Use face cap P-30-271 without alarm switch Cressida sedan 1986-88 TR37 Complete lock NOTE: B-30-130 can be used with the original alarm switch B-30-171 including alarm switch Use face cap P-30-271 Cressida 1985-88 TR25 Complete lock B-30-124 station wagon
Scroll down for more TOYOTA REAR COMPARTMENT LOCKS
Complete lock Reuse the original alarm switch or use B-30-522 listed below B-30-133 without alarm switch Use face cap P-30-217 Cressida 1989-92 TR40 Complete lock B-30-522 Use face cap P-30-271 including alarm switch B-30-532 Echo 2000-02 TR40 Complete lock Use face cap P-30-217 (DWO) TR47 Echo 2003-06 Replacement locks available from Toyota dealers only 10-cut TR47 FJ Cruiser 2007-08 Complete lock B-30-566 Use face cap P-30-217 10-cut TR47 Highlander 2001-07 Complete lock B-30-560 Use face cap P-30-266 10-cut Highlander 2008-18 Remote release only, no lock cylinder Land Cruiser D-30-101 The original pawl must be reused Series FJ40 1969-83 TR33 Coded lock (DWO) Use face cap P-30-201 T80R/T61C key Land Cruiser Various Coded lock Coded lock Tumblers and other service parts Series FJ40 1969-83 Pin liftgate door all years B-30-523 swing out door B-30-524 are not available. Choice of pin tumbler lock tumbler swing out door to 9/72 9/72-up specific keyway not available. Land Cruiser 1969-80 TR33 Replacement locks available from Toyota dealers only Series FJ55 Land Cruiser Complete lock Complete lock 1981-90 TR33 B-30-145 B-30-146 Series FJ60 no power central lock power central locking Land Cruiser Disassembly and rekeying of this lock is not recommended. The cover flap 1991-97 TR40 Complete lock B-30-157 Series 80 is secured at the factory by a rivet that cannot be properly replaced by hand. Land Cruiser TR47 1998-02 Complete lock B-30-530 Use face cap P-30-217 Series 100 8-cut Land Cruiser TR47 2003-07 Complete lock B-30-565 Use face cap P-30-217 Series 100 10-cut TR47 Replacement locks available from Toyota dealers only Matrix 2003-07 10-cut Use face cap P-30-268 1984- MR2 TR33 Complete lock B-30-110 Use face cap P-30-271 (chrome) or P-30-215 (black) 11/86 12/86 – MR2 TR33 Complete lock B-30-111 12/89 1991- MR2 TR40 Complete lock B-30-135 10/93 11/93 – MR2 TR39 Complete lock B-30-162 1995 MR2 2000-05 TR40 Replacement locks available from Toyota dealers only. NOTE: B-30-150 is for cars with inside release lever lockout function. This Complete lock lock can be used on cars without the inside release lever lockout function by without attached B-30-150 reusing the original return spring. (Complete lock for cars without inside Paseo 1992-98 TR39 emblem) release lockout function previously available as B-30-149 (DWO) Use face cap P-30-217 (chrome), or P-30-215 (black) Complete lock B-30-163 with attached emblem Previa 1991-97 TR39 Complete lock B-30-153 TR47 Prius 2001-03 Complete lock B-30-559 8-cut TR47 Prius 2004-08 Replacement locks available from Toyota dealers only. 10-cut TR47 B-30-148 RAV4 1996-00 Complete lock Use face cap P-30-219 8-cut (DWO) TR47 RAV4 2001-05 Complete lock B-30-558 10-cut RAV4 2006-18 Remote release only, no lock cylinder. TR47 Sequoia 2001-07 Complete lock B-30-561 8-cut TR47 Sequoia 2008-18 Replacement locks available from Toyota dealers only. 10-cut TR47 Sienna 1998-03 Complete lock B-30-173 8-cut TR47 Sienna 2004-07 Replacement locks available from Toyota dealers only. 10-cut Starlet 1981-82 TR33 Complete lock B-30-179 Starlet 1983-84 TR33 Complete lock B-30-180 Solara 2004-08 Remote release only, no lock cylinder. Supra 1979-81 TR33 Complete lock B-30-107 Complete lock B-30-519 NOTE: If the original antitheft switch can be reused, use B-30-519 (DWO) TR47 no antitheft switch (DWO) with the original switch. Solara 1999-01 8-cut Complete lock with B-30-520
antitheft switch (DWO)
Scroll down for more TOYOTA REAR COMPARTMENT LOCKS
Complete lock B-30-519
TR47 no antitheft switch (DWO) Solara 2002-03 8-cut For 2002-03 models with antitheft switch, use B-30-519 (DWO) and reuse the original switch. If the original switch cannot be reused, replacement locks with switch are available from Toyota dealers only. Solara 2004-08 Remote release only, no lock cylinder. Supra 1979-81 TR33 Complete lock B-30-107 Complete lock B-30-108 Use face cap P-30-201 Complete lock with Supra 1982-86 TR33 B-30-526 switch on pawl Use face cap P-30-201 (DWO) (some 1985-86 cars) Supra 2/86-88 TR33 Complete lock B-30-115 NOTE: Disassembly of this lock for rekeying is not recommended. The Supra 1989 TR33 Complete lock B-30-116 plastic face cap is molded to the lock body, no replacement is available. NOTE: Disassembly of this lock for rekeying is not recommended. The Supra 1990-93 TR40 Complete lock B-30-117 plastic face cap is molded to the lock body, no replacement is available. TR47 Supra 1993-98 Complete lock B-30-159 8-cut Tacoma TR47 1996-04 Replacement locks available from Toyota dealers only (tailgate) 8-cut Tacoma TR47 2005-19 Replacement locks available from Toyota dealers only (tailgate) 10-cut Tacoma 80000 (tailgate – high 2016-19 Replacement locks available from Toyota dealers only series security key) Tercel 1979-82 TR33 Complete lock B-30-177 hatchback Tercel sedan 1979-82 TR33 Complete lock B-30-178 Uncoded service pack The original pawl must be reused no turn knob B-30-226 Use face cap P-30-271 standard trim level Complete lock The original pawl must be reused Tercel no turn knob B-30-512 1983-86 TR33 Use face cap P-30-271 hatchback standard trim level Complete lock lock with turn knob B-30-118 NOTE: Disassembly of this lock for rekeying is not recommended. The Deluxe and SR5 trim (DWO) plastic face cap is molded to the lock body, no replacement is available. levels The original pawl must be reused Coded lock B-30-118 NOTE: Disassembly of this lock for rekeying is not recommended. The without pawl (DWO) Tercel wagon 1983-89 TR33 plastic face cap is molded to the lock body, no replacement is available. Complete lock NOTE: Disassembly of this lock for rekeying is not recommended. The B-30-527 including pawl plastic face cap is molded to the lock body, no replacement is available. Tercel Replacement locks available from Toyota dealers only. 1987-90 TR39 hatchback Use face cap P-30-217 Coded lock The original pawl must be reused B-30-131 without pawl Use face cap P-30-271 Tercel sedan 1987-90 TR33 Complete lock B-30-516 Use face cap P-30-271 including pawl (DWO) NOTE: B-30-150 is for cars with inside release lever lockout function. This lock can be used on cars without the inside release lever lockout function by Complete lock except B-30-150 reusing the original return spring. (Complete lock for cars without inside LE trim level Tercel 1991-94 TR39 release lockout function previously available as B-30-149 (DWO) Use face cap P-30-217 - Complete lock B-30-554 LE trim level NOTE: B-30-150 is for cars with inside release lever lockout function. This Complete lock lock can be used on cars without the inside release lever lockout function by without attached B-30-150 reusing the original return spring. (Complete lock for cars without inside Tercel 1995-99 TR39 emblem) release lockout function previously available as B-30-149 (DWO) Use face cap P-30-217 (chrome), or P-30-218 (black) Complete lock B-30-163 with attached emblem Tundra TR47 2000-06 Complete lock B-30-569 Use face cap P-30-268 (tailgate) 8-cut Van Wagon 1984-90 TR25 Complete lock B-30-112 Yaris TR47 2007-11 Complete lock B-30-567 hatchback 10-cut Yaris TR47 2012-18 Replacement locks available from Toyota dealers only hatchbackl 10-cut TR47 Yaris sedan 2007-16 Complete lock B-30-568 10-cut
Scroll down for information about tumblers and keying kits
TOYOTA REAR COMPARTMENT LOCKS
Which tumblers and keying kits to use:
The chart below lists which tumblers and keying kits to use according to which key blank the lock uses. Some of these parts are no longer available for new purchase but are listed for the benefit of those who already have them (marked DWO / Discontinued When Out).
Key Blank Tumbler Tumbler Tumbler Tumbler Tumbler Tumbler Keying kits and Notes #1 depth #2 depth #3 depth #4 depth These tumblers were contained in A-30-107 keying kit and TR25 P-30-171 P-30-172 P-30-173 P-30-174 A30-150 combination keying kit, all of these parts are (DWO) (DWO) (DWO) (DWO) discontinued when out (DWO) A-30-116 current keying kit #1 depth #2 depth #3 depth #4 depth TR33 P-30-141 P-30-142 P-30-143 P-30-144 Also contained in the A-30-104 and A-30-150 keying kits which are no longer available for purchase. A-30-116 current keying kit #1 depth #2 depth #3 depth #4 depth TR37 P-30-141 P-30-142 P-30-143 P-30-144 Also contained in the A-30-104 and A-30-150 keying kits which are no longer available for purchase. #1 depth #2 depth #3 depth #4 depth #5 depth #6 depth P-30-151 P-30-152 P-30-153 P-30-154 P-30-155 P-30-156 These tumblers were contained in A-30-105 and A-30-150 (DWO) (DWO) (DWO) (DWO) (DWO) (DWO) combination keying kits which are no longer available for TR39 #7 depth purchase, all of these parts are discontinued when out P-30-157 (DWO) (DWO) A-30-106 current keying kit #1 depth #2 depth #3 depth #4 depth TR40 P-30-161 P-30-162 P-30-163 P-30-164 Also contained in the A-30-150 keying kit which is no longer available for purchase. #1 depth #2 depth #3 depth #4 depth A-30-108 current keying kit full size full size full size full size P-30-181 P-30-182 P-30-183 P-30-184 Also contained in the A-30-114 and A-30-150 keying kits which are no longer available for purchase. TR47 #1 depth #2 depth #3 depth #4 depth
8-cut split split split split NOTE in this series #1 is the deepest cut, #4 is full width of (with split P-30-185 P-30-186 P-30-187 P-30-188 the key blade tumblers) #1 depth #2 depth #3 depth #4 depth These are special extra wide wafers which can replace the special special special special side-by-side split wafers. design design design design A-30-117 keying kit P-30-701 P-30-702 P-30-703 P-30-704 TR47 A-30-113 keying kit 10-cut #1 depth #2 depth #3 depth #4 depth NOTE in this series #1 is the deepest cut, #4 is full width of (no split P-30-131 P-30-132 P-30-133 P-30-134 the key blade. tumblers) A-30-115 keying kit
#2 depth TOY48 #1 depth #2 depth #3 depth Also note that some code listings use depths 1,3,5 instead of alternate “Lexus split split split 1,2,3. In that case our #2 is their #3, and our #3 is their #5 split short key” P-30-121 P-30-122 P-30-123 P-30-124 The no. 2 alternate is used when necessary, if the P-30-122 does not work in a particular chamber use the P-30-124. #1 depth #2 depth #3 depth #4 depth full size full size full size full size Current keying kit A-30-119 which contains all tumblers in P-30-191 P-30-192 P-30-193 P-30-194 this series except P-30-195 (#1 split tumbler) TR53 #1 depth #2 depth #3 depth #4 depth split Also contained in the A-30-109 keying kit which is no longer split split split P-30-195 available for purchase. P-30-196 P-30-197 P-30-198 (DWO) 80000 code Y depth S depth N depth I depth A-30-118 keying kit series P-30-711 P-30-712 P-30-713 P-30-714 LX80 key
Scroll down for information about tumbler springs
TOYOTA REAR COMPARTMENT LOCKS
Tumbler springs:
Over the years we have sold tumbler springs under several different part numbers. As there are very minor differences between the springs used in most Japanese and Korean locks, we have consolidated the various springs as follows: P-00-100 - currently active part number - 100 springs per pack Part numbers previously used, now superseded to P-00-100 P-16-105 P-30-108 P-19-100 RP6546 P-20-105 RP6612 P-20-115 RP6731 P-24-105 RP6822 P-30-105