MB-99

Valves for Mining Services

Engineered Valves ® Fabri-Valve Products Ported Slide Gate and Knife-Gate Valves

Slurry Valves The Fabri-Valve 33/133 ported slide gate is designed specifically for difficult slurry and large diameter mining applications. Available in both bonneted and unbonneted versions, and equipped with constant contact elastomer seats, the valves provide bi-directional shut off from zero to full rated pressure. The design includes a high lubricity body liner or gate support ring (depending upon size) to prevent seat deterioration caused by excess hydraulic load. Available in sizes 2”-54”.

Bi-directional Knife-Gate Valve The Fabri-Valve Bi-directional Knife-Gate Valve is a full port valve providing a bubble tight shut off in both directions, Polyurethane Seated from zero to the full rated Knife-Gate Valve pressure. Most frequently used in water recovery A proven economical systems, this valve design, performer, the Fabri-Valve referred to as the C67, has a C45RP has a ductile iron body unique patented elastomer and a special heavy duty perimeter seat. The seat replaceable polyurethane operates in a mode which seat. The seat provides a insures positive shut off while wide, tough seat face to controlling the effects of stand up to abrasion. And, compression set to prolong when the time comes to the seat life. Available in sizes renew the seat it is easily 2”-36” in stainless steel or replaced by slipping a new ductile iron. seat between the valve and the adjacent flange. The Fabri-Valve C45RP is available in sizes 2”-24”. ® Dia-Flo Valve Products Weir and Straightway Diaphragm Valves

Weir Diaphragm Valve In process feed, chemical feed and metal refinery lines, Dia-Flo plastic lined and solid plastic weir style diaphragm Dualrange® Control Valve valves are the process proven, economical solution. When flow control is needed, Given the variety of process the unique design of the chemicals (acid, caustic, Dualrange Control Valve cyanide, chlorine and water provides the same inherent solutions), the broad selection benefits as our weir style of body materials and diaphragm valve plus diaphragms make Dia-Flo increased rangeability. The diaphragm valves typically patented two piece one of the most cost- compressor design allows effective solutions. movement of one compressor at a time providing close to linear control characteristics. By providing us with your flow parameters, we can aid you in selecting the proper weir valve size to suit your process needs. Actuated Diaphragm Valve Carbon fines, chemical feed, process feed, filter press, abrasive and slurry lines utilize Straightway Diaphragm Valve both Dia-Flo weir and straightway The challenges in handling actuated diaphragm valves. The abrasive and corrosive fluids in actuator is pneumatically areas such as tailings, carbon operated and diaphragm driven fines, process feed and filter press to ensure low maintenance and a lines are met with the Dia-Flo long service life. Actuators are straightway diaphragm valve. This available in three modes of oper- valve design features an ation: (fail open, fail closed or uninterrupted streamlined flow double acting) with any path. That eliminates any potential combination of accessories: limit areas where solids or slurries may switches, positioners, or manual become entrapped preventing full overrides. These actuators can valve closure. In addition, the be ordered to suit your exact variety of rubber, plastic and glass application. body linings as well as the broad selection of metal and alloy base materials offers an abrasion resistant and chemically compatible valve solution for almost any process line. For additional information on ENGINEERED VALVES products as referenced, call 1-800-2ITT-FTC, (1-800-248-8382) or contact the nearest regional office listed below.

CAM-TITE® DIA-FLO ® SKOTCH® Metal Ball Valves Diaphragm Valves Burner Shut-Off Valves

CAM-LINE® FABRI-VALVE® PURE-FLO® Lined Ball Valves Knife Gate and Special Hygienic Diaphragm Valves Fabricated Valves

Engineered Valves

REGIONAL OFFICES

For more information write to: NORTHEAST – USA SOUTHERN – USA SOUTH AMERICA Engineered Valves 33 Centerville Road, 425 Crossville Road, Suite 103 Av. 11 de Septiembre #1363 33 Centerville Road, P.O. Box 6164, P.O. Box 6164 Roswell, GA 30075-3037 Of. 1403 Providencia Lancaster, PA 17603 Phone (770) 594-0455 Santiago - Chile Lancaster, PA 17603-2064 USA Phone (800) 231-0328 Fax (770) 594-0362 Phones 011-56-2-264-9491 or call: (800) 366-1111 Fax (800) 231-0330 011-56-2-264-9637 (717) 509-2200 MEXICO Fax 011-56-2-236-1799 Fax: (717) 509-2336 WESTERN – USA Insurgentes Sur No.670-7°P 725 East Cochran Street, Unit E Col. Del Valle EUROPE Docufax: (800) 215-0149 Simi Valley, CA 93065 C.P. 03100 Mexico D.F. Bingley Road, Hoddesdon Website: www.engvalves.com Phone (805) 520-7200 Phone 011-52-5-669-5002 Hertfordshire EN11 OBU E-mail: http://engvalves.ittind.com Fax (805) 520-7205 Fax 011-52-5-669-5289 United Kingdom Phone 011-441-992-450145 MIDWESTERN – USA PUERTO RICO Fax 011-441-992-462342 1010 Jorie Blvd., Suite 370 P.O. Box 1225 Oak Brook, IL 60523-2285 Hato Rey, PR 00919 HONG KONG Phone (630) 990-8020 Phone (787) 758-0365 Units 1903-04 CRE Centra Fax (630) 990-1037 Fax (787) 771-6439 889 Cheung Sha Wah Rd. Kowloon, Hong Kong Phone 011-852-2566-2802 Fax 011-852-2508-6796

©1999 Engineered Valves