WWW.MAHINDRATRACTOR.COM
FARM MACHINERY CATALOGUE 1 LAND PREPARATION
2 FARM MACHINERY CATALOGUE Land Preparation
Disc Plough
Duckfoot Cultivator
Rotary Tiller
Reversible MB Plough
Spring Loaded Cultivator
Power Harrow
FARM MACHINERY CATALOGUE 3 Disc Harrow
Sub Soiler
Rigid Tyne Cultivator
Gyrovator
Laser Land Leveller
4 FARM MACHINERY CATALOGUE Land Preparation Sub Soiler
Product Description
Tractor mounted implement used for deep tillage, turning over the upper soil layer
Utilization Land Preparation I Primary Tillage
Helps loosen soil at deeper levels Improve growth in all crops where soil compaction is a problem Brings fresh nutrients to the surface, and removes weed/residue Can be used as the first application in the cultivation process on barren lands
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power Sub-Soiler 1 Tyne 33.56 kW (45 HP) 37.29 kW (50 HP) 41.01 kW (55 HP)
FARM MACHINERY CATALOGUE 5 Types/Variants
1 Row 2 Row 3 Row Attributes
Robust, sturdy, and easy to operate
Offers maximum depth (45cm - 60cm)
Deep penetration in the soil
Technical Specifications Parameters FKSS-1 FKSS-2 FKSS-3 FKSS-5 Length (mm) 510 550 830 1554 Width (mm) 660 1220 1520 2510 Height (mm) 1060-1370 1060-1370 1060-1370 1422-1672 Width of cut (mm) 70 708-960 1055-1284 1810 Tyne to Tyne Distance (mm) NA 600-863 465-576 550 Tyne (mm) 150X25 150X25 150X25 150X25 Number of tynes 1 2 3 5 3-Point linkage Cat - II Cat - II Cat - II Cat - II & III Accessories (Optional) Crumbler Crumbler Crumbler Crumbler 32.7x25 32.7x25 32.7x25 50x12 Crumbler (mm) (Round Pipe) (Round Pipe) (Round Pipe) (Flat) Crumbler length (mm) 650 1220 1530 2510 Weight without crumbler 68 195 280 570 (kg approx.) Weight with crumbler 150 245 420 790 (kg approx.) 6 FARM MACHINERY CATALOGUE Land Preparation
Key Benefits
Shatters the hard Removes unwanted pan that builds up due grass and breeding to compaction places of pests from deep within the soil
Moisture retaining capacity of soil Increased water increases due to deep movement penetration
Better aeration of the roots
FARM MACHINERY CATALOGUE 7 Disc Plough Product Description
Disc Plough is a 3 point linkage primary land preparation implement
It is used for digging soil, generally more useful for soft soil condition
Utilization Land Preparation I Primary Tillage
To crush the clods into fine particles To ensure effective cutting and mixing of stubbles and weeds with better mixing of manure The disc plough helps keep the load on tractor in check with better fuel efficiency Can be used as the first application in the cultivation process on barren lands
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
2 Disc 22.37 kW (30 HP) 29.83 kW (40 HP) 33.56 kW (45 HP)
Disc Plough 3 Disc 29.83 kW (40 HP) 33.56 kW (45 HP) 41.01 kW (55 HP)
4Disc 37.28 kW (50 HP) 41.01 kW (55 HP) 44.74 kW (60 HP)
8 FARM MACHINERY CATALOGUE Land Preparation Types/Variants
2 Disc Plough 3 Disc Plough 4 Disc Plough
Attributes
Scrappers are Adjustable width of the provided so that cut of plough for optimum stuck material can be coverage automatically removed
Made of forged alloy and are heat treated to work efficiently in hard land conditions
Technical Specifications Parameters 2 Disc Plough 3 Disc Plough 4 Disc Plough Overall Length (mm) 1600 1600 3000
Overall Width (mm) 1321 1321 1260
Overall Height (mm) 1270 1270 1220
Number of discs 2 3 4
Diameter of disc (mm) 660 660 660
Depth of cut (mm) 254 254 254 Total Weight (kg) 331 385 495
FARM MACHINERY CATALOGUE 9 Key Benefits
Crushes the clods into fine particles More useful in i.e. better tilth as deep ploughing compared to standard cultivator
Works well in Used in stony and sticky soil stumpy soil
Soil inversion after fitting scrapers
10 FARM MACHINERY CATALOGUE Land Preparation Reversible MB Plough
Product Description Tractor mounted implement used for deep tillage, turning over the upper soil layer
It’s a draft implement and works with heavy weight tractors
Utilization Land Preparation I Primary Tillage
Used for deep tillage of land Turns over the upper layer of the soil & brings fresh nutrients to the surface It also aerates the soil, allows it to hold moisture better The shape of mould board is designed to cut down the soil and invert it Buries weeds and remains of previous crop
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
1 Bottom 11.19 kW (15 HP) 14.91 kW (20 HP) 18.64 kW (25 HP)
MB Plough 2 Bottom 22.37 kW (30 HP) 29. 83 kW (40 HP) 37.28 kW (50 HP)
3 Bottom 37.28 kW (50 HP) 44.74 kW (60 HP) 59.66 kW (80 HP)
Reversible Plough 2 Bottom 29. 83 kW (40 HP) 33.57 kW (45 HP) 37.28 kW (50 HP)
FARM MACHINERY CATALOGUE 11 Types/Variants
Hydraulic Mechanical
Attributes
Robust, sturdy and easy to operate
Automatic furrow changing system Removes unwanted grass and other waste from their roots Deep penetration level (304mm-355mm)
Technical Specifications 2 Furrow - Hyd. 2 Furrow - Mech. 3 Furrow - Hyd. / Parameters (400) (400) Mech. (400) Distance b/w furrow (mm) 254 - 304 - 355 254 - 304 267 Number of bottom 2 2 3 Frame (mm) 1016X115X25 1016X115X25 1194X115X25 Overall dimension 1905X1245X1320 1702X1118X1270 1880X1067X1094 (L × W × H) mm Blade (mm) 435X178X11 425X152X10 381X101X10 Mould board plate (mm) 11 MS Plate 8 MS Plate 6 MS Plate Shovel (mm) 965X32X25 863X32X25 660X32X25 Type of linkage 3 Point linkage 3 Point linkage 3 Point linkage Cutting width (mm) 508 - 610 - 914 762 - 610 787 Depth of cut (mm) 457 457 203 Leg size 34 30 28
12 FARM MACHINERY CATALOGUE Land Preparation
Key Benefits
It aerates the soil, ncreases humus and allows it to hold I moisture better and fertility of soil is tough to withstand heavy loads
Deep tillage of land, to help turn over the upper layer of the soil, bringing fresh nutrients to the surface, while burying weeds and remains of previous crop
FARM MACHINERY CATALOGUE 13 Power Harrow Product Description
Power Harrow is a PTO-driven implement
It consists of a series of bladed rotors, which counter-rotate about a vertical axis
It does not create a hard pan
Utilization Land Preparation I Secondary Tillage
To create the perfect seed bed To break the clods of soil generated after primary tillage To refine the soil and evenly distribute it over the entire working area
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
1300 26.1 kW (35 HP) 29.83 kW (40 HP) 33.57 kW (45 HP)
Power Harrow 1500 29.83 kW (40 HP) 33.57 kW (45 HP) 37.28 kW (50 HP)
1800 37.28 kW (50 HP) 41.01 kW (55 HP) 41.01 kW (55 HP)
14 FARM MACHINERY CATALOGUE Land Preparation Types/Variants
Fixed Power Folding Power Harrow Harrow
Attributes
Multi speed gearbox for 540 & 1000 r/min PTO swinging brackets
Universal joint power transmission shaft
High quality boron steel knives
Track eradicator
Technical Specifications
Parameters 1300 1500 1800
Working width (cm) 130 150 180
Whole width (cm) 135 155 185
Working depth (cm) 20 20 20
Number of knives 10 12 14
FARM MACHINERY CATALOGUE 15 Key Benefits
an easily plough C t can be operated any land and achieve I even under the tillage depth up to toughest conditions 10 inches
Executes work Sturdy gearbox with quickly, thus longer life and lesser reduces fuel maintenance consumption and soil compaction
It can be used directly after harvesting for next crop’s seed bed preparation, saving time & fuel
16 FARM MACHINERY CATALOGUE Land Preparation Laser Leveller
Product Description It is an implement used for levelling the field
The laser leveller deeply shifts soil from the high points of the field to the low points and hence assists escalating the yielding ability of the soil
Utilization Land Preparation
Optimum utilization of water High speed working & reduction in weeding cost For enhanced soil moisture distribution & better germination Reduces soil erosion and excessive water accumulation by levelling the land uniformly Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
Laser Leveller 2.13 m 33.57 kW (45 HP) 37.28 kW (50 HP) 41.01 kW (55 HP)
FARM MACHINERY CATALOGUE 17 Types/Variants
Laser Land Leveller- 2.13 m
Attributes
Dual Slop Models
Windy mode
Long Lasting Batteries
Electric Power MAST
High Temperature Diodes
Technical Specifications
Parameters 670 mm Class II
Type of Blade M S Flat Working width (mm) 2095 Chassis type Hollow M S beam with side plate welded at both side. Size of square beam (mm) At front - 2104 × 132 × 132 Thickness of side support plate (mm) 10 Size of MS Flat plate (L × W × Thickness) mm 560 × 65 × 8.6 Size of blade (L × W × Thickness) mm 2095 × 125 × 13.3 Transmitter Model RL-700H Receiver Model LS-200 Overall dimension (L × W × H) mm 3500 × 2220 × 2945
18 FARM MACHINERY CATALOGUE Land Preparation
Key Benefits
Reduces soil Reduced cultivation erosion and excessive time water accumulation by levelling the land uniformly.
Better SFC makes it more High nutrient economical to use use efficiency
Optimum auxilary hydraulic output Increase in of tractor makes crop yield the operation of laser leveller more efficient
FARM MACHINERY CATALOGUE 19 Rotary Tiller Product Description
It is a tractor mounted and PTO driven implement
It offers better pulverization of the soil
Utilization Land Preparation I Pramary & Secondary Tillage
It is used as both primary and secondary tillage operations For better mixing of soil Ensures smooth operation in different soil types Superior pulverization of soil
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
YUV - 0.8 11.18 kW (15 HP) 11.18 kW (15 HP) 14.09 kW (20 HP)
Rotary Tiller YUV - 1.0 14.09 kW (20 HP) 14.09 kW (20 HP) 18.64 kW (25 HP)
YUV - 1.2 18.64 kW (25 HP) 22.37 kW (30 HP) 22.37 kW (30 HP)
20 FARM MACHINERY CATALOGUE Land Preparation
Attributes Adjustable trailing board with two ram springs
Big module gears for noise free operation
Soil retention guard
Helicoidally blades
Technical Specifications
Parameters YUV - 0.8 YUV - 1.0 YUV - 1.2
Tillage Width (m) 0.85 1.05 1.25
Number of blades 16 20 24 540 Gear Box Protection Single Speed Gear Drive L type Safety Bolt Type Weight (kg) 171 186.5 202.5
FARM MACHINERY CATALOGUE 21 Key Benefits
Ease working in Superior pulverization interculture of soil in dry and wet operation operations
Effective for puddling Crushes the clods due to better churning into fine particles i.e. of soil better tilth
Excellent cutting and mixing of stubbles
22 FARM MACHINERY CATALOGUE Land Preparation Gyrovator Product Description It is a tractor mounted and PTO operated implement which does 3 operations at a time. i.e. cutting, mixing and levelling of soil.
It is equipped with Multi Speed Drive, it offers wider range of rotor speed ratios
Utilization Land Preparation I Secondary Tillage
Soil preparation, soil pulverization, mixing and levelling of soil in one go For digging earth, de-weeding, mixing and levelling of soil in one go For interculture operation For better churning of soil while puddling operation
Suitable Tractor Power
Implement Name Specs 1.50 m SLX 1.75 m SLX 2 m SLX 2.3 m SLX
Soft Soil Engine Power 40 HP 40 HP 55 HP 60 HP
Medium Soil Gyrovator SLX Engine Power 45 HP 50 HP 55 HP 60 HP
Hard Soil Engine Power 50 HP 55 HP 60 HP 65 HP
FARM MACHINERY CATALOGUE 23 Suitable Tractor Power Implement 1.25 m 1.45 m 1.65m 1.85 m 2.25 m Spece 1m ZLX 2 m ZLX Name ZLX ZLX ZLX ZLX ZLX Soft Soil 14.91 kW 18.64 kW 26.1 kW 29.83 kW 33.57 kW 37.28 kW 37.28 kW Engine (20 HP) (25 HP) (35 HP) (40 HP) (45 HP) (50 HP) (50 HP) Power Medium- Gyrovator Soil 18.64 kW 22.37 kW 29.83 kW 33.57 kW 37.28 kW 41.01 kW 41.01 kW ZLX Engine (25 HP) (30 HP) (40 HP) (45 HP) (50 HP) (55 HP) (55 HP) Power Hard Soil 22.37 kW 26.1 kW 33.57 kW 37.28 kW 41.01 kW 48.47 kW 44.74 kW Engine (30 HP) (35 HP) (45 HP) (50 HP) (55 HP) (65 HP) (60 HP Power
Types/Variants
Gyrovator SLX Gyrovator ZLX
Attributes
Multi-speed gearbox
Helicoidally blades
Adjustable trailing board with two ram springs
Oil filled bearings on both sides
24 FARM MACHINERY CATALOGUE Land Preparation ZLX Technical Specifications
Parameters ZLX 125 ZLX 145 ZLX 165 ZLX 185 ZLX 205
Working width (m) 1.25 1.45 1.65 1.85 2.05 PTO r/min 540 540 540 540 540
Number of Blades 36 42 48 54 60
Type of Blade L L L L L Drive Gear Drive
Rotor Speed Multi Speed: 4 Speed Standard
SLX Technical Specifications
Parameters SLX 150 SLX 175 SLX 200 SLX 230
Working width (m) 1.50 1.75 2.00 2.3 PTO r/min 540 540 540 540
Number of Blades 36 42 48 54
Type of Blade L/C L/C L/C L/C Drive Gear Drive Rotor Speed Multi Speed: 4 Speed Standard
FARM MACHINERY CATALOGUE 25 Key Benefits
rushes the clods C xcellent cutting and into fine particles i.e. E mixing of stubbles better tilth
Effective for puddling Superior due to better churning pulverization of of soil and less slippage soil in dry and wet as compared to puddler/ operations disk harrow
After harvesting Mahindra tractors rice/paddy, it churns offer better pulling the remains of the power and perfect crop to increase the speeds to match the humus Gyrovator
26 FARM MACHINERY CATALOGUE Land Preparation Disc Harrow Product Description Disc Harrow is a tractor mounted implement attached on tow hook
Utilization Land Preparation I Primary Tillage
To break the big clots of soil which emerge from the ploughing operations For better mixing of manures Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
6x6 22.37 kW (30 HP) 29.83 kW (40 HP) 37.28 kW (50 HP)
7x7 26.1 kW (35 HP) 29.83 kW (40 HP) 37.28 kW (50 HP)
Disc Harrow 8x8 29.83 kW (40 HP) 29.83 kW (40 HP) 41.01 kW (55 HP)
10x10 29.83 kW (40 HP) 33.57 kW (45 HP) 48.47 kW (65 HP)
12x12 44.74 kW (60 HP) 52.2 kW (70 HP) 59.66 kW (80 HP
FARM MACHINERY CATALOGUE 27 Types/Variants
Offset 14 Disc Offset 18 Disc Offset 20 Disc
Attributes
Front discs with notches
Available with different disc sizes to suit the HP of tractor
Scrappers for automatic removal of material stuck in between
Crushes the clods into fine particles
Technical Specifications Offset Offset Offset Offset Offset Offset Parameters 12 Disc 14 Disc 16 Disc 18 Disc 20 Disc 22 Disc Number of Disc 12 14 16 18 20 22 Type of mounting 3 Point Linkage Disc Dia (mm) 22 or 24 x 4 mm Thick Disc Type Front: Notched, Rear: Plain 2100 x 2100 x 2100 x 2260 x 2360 x 2460 x Overall: Length x Width x Height 1450 x 1700 x 1950 x 2030 x 2260 x 2490 x (mm) 1260 1260 1260 1290 1290 1290 Total Weight (Approx.) kg 440 464 485 520 555 590 Disc Spacing 225 Maximum Depth 100 to 150 Width of Cut (mm) 1100 1550 2000 2450 2900 3350
26.1 kW 29.83 kW 29.83 kW 37.28 kW 37.28 kW 41.01 kW Suitable Tractor Power Range (35 HP) (40 HP) (40 HP) (50 HP) (50 HP) (55 HP)
28 FARM MACHINERY CATALOGUE Land Preparation
Key Benefits
More torque at less RPM (full torque Better pulling power at 1300 rpm) gives and suitable speed better fuel economy options to match the while operating with a speed of Harrow Disc Harrow
Ensures effective The Hy-tech hydraulic cutting and mixing of technology helps stubbles and weeds in faster lifting and with better mixing of lowering of the Disc manure Harrow
FARM MACHINERY CATALOGUE 29 Spring Loaded Cultivator
Product Description Cultivator is a secondary tillage equipment mounted on a tractor to till the agriculture land
It helps prepare the seed bed quickly and economically
Utilization Land Preparation I Secondary Tillage
To stir and pulverize the soil before planting For paddy cultivation areas requiring shallow ploughing on hard clay cracked up soil
30 FARM MACHINERY CATALOGUE Land Preparation Types/Variants
9 tyne 11 t y n e 13 t yne
Attributes
Powder coated paint for long life
Used CO2 Welding for better strength
Standard & High Tensile fasteners to avoid breakage
Tempered & reversible Shovels for multiple use & longer
Technical Specifications
Parameters 9 Tyne 11 Tyne 13 Tyne
Overall Length (mm) 2000 2457 2914
Overall Width (mm) 1830 2287 2744
Overall Height (mm) 701 701 701
Total Approx.Weight (kg) 285 345 405
FARM MACHINERY CATALOGUE 31 Key Benefits
The track width The Hy-tech of the rear and hydraulic technology front tyres can be helps faster lifting adjusted as per size and lowering of the of cultivator which cultivator prevents crop damage
It saves time and More torque at less offers precision in RPM gives better fuel work as it is simple economy to operate and quick to adjust
32 FARM MACHINERY CATALOGUE Land Preparation Rigid Tyne Cultivator Product Description Rigid tyne cultivator is sturdy and capable of with standing tough working conditions
It can break hard soil efficiently and uproot stubble to leave the ground perfectly worked
Utilization Land Preparation
Improving soil structure Pulling & burying weeds Pulling & burying weeds Building rows
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power 7 Tyne 18.64 kW (25 HP) 26.1 kW (35 HP) 33.57 kW (45 HP)
9 Tyne 22.37 kW (30 HP) 29.83 kW (40 HP) 33.57 kW (45 HP) Cultivator 11 Tyne 29.83 kW (40 HP) 33.57 kW (45 HP) 33.57 kW (45 HP)
15 Tyne 41.01 kW (55 HP) 52.2 kW (70 HP) 59.66 kW (80 HP) FARM MACHINERY CATALOGUE 33 Types/Variants
7 Tyne 9 Tyne 11 Ty n e
Attributes
A strong and robust tool designed for breaking up hard land and mixing crop residue life. Heavy - duty tines for positive penetration Operates as a light chisel plough
Powder coated paint for long life
Technical Specifications
Parameters 7 Tyne 9 Tyne 11 Tyne 13 Tyne
Overall Length (mm) 1524 2000 2451 2900
Overall Width (mm) - 850 850 -
Overall Height (mm) 535 1010 1010 535
Under frame clearance (mm) - 431 431 -
Total Approx.Weight (kg) 168 250 300 -
34 FARM MACHINERY CATALOGUE
Land Preparation
Key Benefits
It saves time and offers Strong and robust precision in work as it is tool designed for simple to operate and breaking up hard quick to adjust land and mixing crop residue
Especially useful The Hy-tech hydraulic for paddy cultivation technology helps areas requiring shallow faster lifting and ploughing on hard clay cracked up soil lowering of cultivator
FARM MACHINERY CATALOGUE 35 Duckfoot Cultivator
Product Description Duckfoot Cultivator consists of a box type steel rectangular frame, rigid tines and sweeps
The sweeps are triangular in shape similar to foot of duck, hence called Duckfoot Cultivator
Utilization Land Preparation I Secondary Tillage
To be used in hard soils for shallow ploughing For final field preparation and finer pulverization of the top soil immediately before sowing
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power 1 Row 29.83 kW (40 HP) 33.57 kW (45 HP) 37.28 kW (50 HP)
Duckfoot Cultivator 2 Row
3 Row
36 FARM MACHINERY CATALOGUE Land Preparation Types/Variants
Duckfoot 1 row Duckfoot 2 row Duckfoot 3 row
Attributes Operates as a light chisel plough This implement is used especially in hard soil conditions
Simple to operate & quick to adjust
Makes the rows for vegetable crops
Technical Specifications
Parameters 1 Row 2 Row 3 Row
No.of arm 1 arm 2 arm 3 arm
Length (mm) 510 525 825
Width (mm) 660 1200 1500
Height (mm) 1060 Adjustable 1050 to 1350
Tyne (mm) 150 X 25
FARM MACHINERY CATALOGUE 37 Key Benefits
The option of adjusting the distance between the Powerful tractors tynes, makes Mahindra designed for breaking Tractors suitable for inter- hard land and mixing culture operations with crop residue the Duckfoot Cultivator
Strong and robust Makes the tool designed for rows for vegetable breaking up hard crops land and mixing crop residue
38 FARM MACHINERY CATALOGUE SOWING
FARM MACHINERY CATALOGUE 39 Walk Behind Rice Transplanter
Seed Cum Fertilizer Drill
Happy Seeder
Potato Planter
40 FARM MACHINERY CATALOGUE Sowing Walk Behind Rice Transplanter
Product Description The rice transplanter, transplants the seedling uniformly without damaging them
It consists of prime mover, transmission, engine, float, lugged wheels, seedling tray, seedling tray shifter, pickup fork and pickup fork cleaner
Utilization Sowing and plantation
It reduces manual labour & improves crop productivity To ensure precise transplantation by maintaining plant to plant distance & number of saplings
FARM MACHINERY CATALOGUE 41 Types/Variants
MP461
Attributes Powerful 3.73 kW (5 HP) petrol engine
Easy accessible controls
Fast speed of operation
Appropriate planting speed range (0.4 - 0.85 m/s) for the best results
Rubber lug wheel
Technical Specifications
Parameters MP461 Power (kW/rpm) 3.72 kW/1700 r/min Fuel Petrol Transmission No. of Wheel 2 No. of Speeds 2F + 1R Planter Planting Depth 5 step No. of Rows 4 Distance between Rows (mm) 300 Planting Pitch (mm) 160, 180, 210 Planting Speed (m/s) 0.4 - 0.85 Operating Weight (kg) 180
42 FARM MACHINERY CATALOGUE Sowing Method’s of Nursery bed preparation 1. Seedlings Tray Method
1 2 Methods of Making Seedlings Arrange trays in order on the nursery bed and Place the rail
3 4 Seeding and Sowing - check trays are placed Preparing Nursery Bed - Make nursery bed correctly and roll the manual seeder on rails ground and channel for uniform distribution of seeds
5 6 Watering and Covering - Put water into the Preparing Nursery Bed - Make nursery bed field and maintain the water at the 25% level ground and channel of the Soil
FARM MACHINERY CATALOGUE 43 2. Nursery Preparation MAT Type
1 2 Making Nursery Bed - Bed preparation Use of Plastic Sheet as MAT - Place the can be made easily at the time of cake frame plastic sheet & make random holes in preparation plastic sheet
3 4 Seeding and Soiling - Place the frame on, wet Fill up the frame with we soil & scrap it from soil from channel can used for base soil for frame level nursery
5 6 Flood irrigation can be done 5 days. Ensure Precausion - Cover with threaded bags or to fill water till the bed level not touching the rice straws base soil
44 FARM MACHINERY CATALOGUE Sowing
Key Benefits
Precise distance Fast speed of between rows, each operation helps plant and depth of save time planting is uniformly maintained
Transplantation Easy accessible enables high yield. controls especially for Indian farmer
Low vibration level does not cause fatigue to operator
FARM MACHINERY CATALOGUE 45 Seed Cum Fertilizer Drill
Product Description Seed cum fertilizer drill is used for sowing of different type of seeds in already prepared field. It places seeds as well as the fertilizer at the desired depth
Utilization Sowing
Uniform seed placement Controlling seed depth Covering the seed with soil
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
5 tyne automatic 22.37 kW (30 hp) 22.37 kW (30 hp) 26.1 kW (35 hp) Automatic seed drill/ Multi Seed 7 tyne automatic 26.1 kW (35 hp) 26.1 kW (35 hp) 29.82 kW (40 hp) Drill 9 tyne automatic 26.1 kW (35 hp) 33.55 kW (45 hp) 41.1 kW (55 hp) Combo seed drill / Seed Cum fertil- 2 m 29.82 kW (40 hp) 29.82 kW (40 hp) 33.55 kW (45 hp) izer drill 46 FARM MACHINERY CATALOGUE Sowing Types/Variants
Automatic seed drill/ Combo seed drill / Seed Multi Seed Drill Cum fertiliser drill
Attributes More seed and fertilizer storage
Uniform seed placement
Adjustable row to row spacing
Efficient metering device drive
Adjustable seed rate as per seed size
Technical Specifications
Parameters SD-CT-11
Number of tynes 7, 9, 11, 13
Weight (kg) 390, 410, 430, 450
Overall width (mm) 2108 × 1219 × 1524
Seed capacity (kg) 100
Fertilizer capacity (kg) 100
Tractor Engine Power More than 26.1 kW (35 HP)
Row to Row spacing Standard and adjustable
FARM MACHINERY CATALOGUE 47 Key Benefits
No wastage of Seed- Saves approximately 15 ess dependency on to 20 Kgs of Fertilizer L labour as compared to broadcasting method
ore productivity M ven distribution of per acre: 10 to 15% E fertilizer - every seed more yield due to gets the required proper row to row amount of fertilize spacing of seed
By using blending control (PC and DC lever setting) the Seed cum fertilizer drill drops the seeds at uniform depth (2-3”)
48 FARM MACHINERY CATALOGUE Sowing Happy Seeder
Product Description Happy seeder is capable of sowing wheat crop in standing stubbles of paddy crop placing seeds and fertilizer at the desired depth
Utilization Seed placing I After land preparation
Uniform seed placement Controlling seed depth Covering the seed with soil
FARM MACHINERY CATALOGUE 49 Attributes
Separate hoppers (trapezoidal shape) for fertilizer and seed
Blade made of high carbon material
Seed and fertilizer metering mechanism
Inverted T - type furrow openers
Technical Specifications
Parameters 9000 m 10000 m Power Source 33.57 kW (45 HP) or Above 37.28 kW (50 HP) or Above Hitch type CAT-II CAT-II Row to row distance (mm) 225 Type of Furrow openers Inverted T-Type Minimum rotor drum diameter (mm) 720 750 Rotor shaft diameter (mm) 140 140
Rotor r/min 1400 r/min at 540 r/min of tractor PTO Types of blades Flail, Reversible Straight Gamma Type Blade Material High Carbon Minimum diameter of ground wheel (mm) 550 Blade overlapping above furrow openers (mm) 50-60 Hardness of furrow openers 432 Separate Hoppers (trapezoidal shape) for fertilizer and seed Seed and with mechanism for feed rate control. The hoppers should be sufficiently covered to prevent the entry of water. Fertilzer Openers The thickness of sheet should be ≥ 1.0 mm for mild steel and ≥0.63 for GI sheet.
Working width (mm) 2025 2230
Without any sharp bend and should be transparent, Seed and fertilizer tubes thickness (minimum 2.5 mm)
Seed and fertilizer metering mechanism Provided
Rotavator shield to prevent flying of mud & stone Provided
Marking/labeling of machine Provided
Guard over propeller shaft Provided
50 FARM MACHINERY CATALOGUE Sowing
Key Benefits
Majority of This technology the residue is not is eco-friendly with disturbed and seed is environment for the sown in a single pass health of soil as well as it also saves water
irect sowing emoves the need D R also reduces soil to burn rice stubble disturbance, enabling before planting wheat, it to retain more therefore reducing air nutrients, moisture pollution and organic content
Saves money as less time is needed to carry out field operations, which in turn reduces fuel and labour costs
FARM MACHINERY CATALOGUE 51 Potato Planter Product Description
Potato planter is an advance planting mechanism which ensures high planting speed with good accuracy and allows gentle handling of seed potatoes
Utilization Sowing
For Planting Potato
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine power
Potato Planter MCP 22 3P 44.74 kW (60 HP) 44.74 kW (60 HP) 44.74 kW (60 HP)
52 FARM MACHINERY CATALOGUE Sowing Types/Variants
MCP 22 3P
Attributes Cups specifically designed for perfect holding and singulation of potatoes Covering plough system with wide adjustment range Gear adjustments to choose seeding distances up to 12 positions
Rubber sides on top roller for bigger potatoes
Covering ploughs and cage rollers
Technical Specifications
Parameters MCP 22 3P
Length & width ~ 75cm (90cm) 1, 9 m Number of rows 2
Tractor connection Lifted (cat. II) Hopper - Type Fixed Content (500 - 650 kg) Drive Mechanic Weight (kg) 600 Planting capacity ~ 25cm, 3-6 km/h 0.4–0.7 ha/hr Tractor Power 44.74 kW (60 HP)
FARM MACHINERY CATALOGUE 53 Key Benefits
Covering ploughs The cups are can create wide ridges cleaned just after the Creates fluffy but sub roll in the upward sturdy ridges with a path and prevents big circumference cups from clogging (depending on row width) with dirt and sprouts
Managed constant Keep maintained dept and no timing a perfect equal differncs small or big distance and ensure patatoes accurate planting
A layer of 4-5 Maintained potatoes in the bowl perfectly in line is sufficient to be potato during sowing picked up
54 FARM MACHINERY CATALOGUE CROP CARE
FARM MACHINERY CATALOGUE 55 Grapemaster Blast+
Grapemaster Bullet++
56 FARM MACHINERY CATALOGUE Crop Care Grapemaster Blast+
Product Description Grapemaster Blast + is a tractor trailed sprayer for vineyards that gives superior performance with 24 HP and above tractors
Enabled by its lightweight and durable design, Blast + provides best output in both Y-shape and Mandap vineyards
Utilization Crop Care
Perfect air balancing and high air output gives efficient chemical penetration Better spray coverage in orchards and helps to reduce the MRL level Best suited for spraying, dipping, thinning & removing due from canopy
FARM MACHINERY CATALOGUE 57 Attributes Air recovery system for excellent air output
Water suction facility up-to 2.4 m
100 % coverage to prevent powdery mildew, 2 speed + neutral downy mildew and mites gearbox Air recovery system for excellent air 75 LPM diaphragm output pump
Technical Specifications
Parameters Grapemaster Blast+
Dimension (m) 2.9 m (L) × 1.1 m (W) × 1.2 m (H)
Tractor Power 17.9 kW (24 HP) and Above
PTO Power 11.93 kW (16 HP) and Above
Dry Weight (kg) 380 kg
Pump rate (LPM) 75 LPM Diaphragm Pump
Fan diameter 616 mm
Air flow Average 32 m/sec
Main tank capacity (litres) 600
Rinsing tank capacity (litres) 25
Handwash tank capacity (litres) 10
Gearbox 2 Speed + Neutral Pressure relief valve (Pump), Innova Coupling (Transmis- Safety device sion) Nozzle 12 nozzle (1.0 Ceramic disc + ATR 60)
Controller Manual Control Panel
58 FARM MACHINERY CATALOGUE Crop Care
Key Benefits
Provides uniform flow of water without Uniform high volume pulsation, and superior air output crop protection
educes MRL level R orks efficiently in leading to saving of W muddy conditions chemical and fuel
Best suited for spraying, dipping, thinning & removing due from canopy resulting in evenly sized export quality grapes
FARM MACHINERY CATALOGUE 59 Grapemaster Bullet++ Product Description Grapemaster Bullet ++ is a tractor trailed sprayer for vineyards that gives superior performance with 17.9 kW (24 HP) and above tractors
Enabled by its lightweight and durable design, Bullet ++ provides best output in both Y-shape and Mandap vineyards
Utilization Crop Care
Perfect air balancing and high air output gives efficient chemical penetration Better spray coverage in orchards and helps to reduce the MRL level Best suited for spraying, dipping, thinning & removing due from canopy
60 FARM MACHINERY CATALOGUE Crop Care
Attributes 200 litres HDP Tank 2 Speed + Neutral Gearbox
Water suction facility up-to 2.4 m 100 % coverage to prevent powdery mildew, downy mildew and mites
Diaphragm pump with 65 LPM pump rate Straight angle deflectors
Technical Specifications
Parameters Grapemaster Bullet++
Dimension (m) 1.3 m (L) ×0.9 m (W) × 1.3 m (H)
Tractor Power 17.9 kW (24 HP) and Above
PTO Power 11.93 kW (16 HP) and Above
Dry Weight (kg) 220 kg
Pump rate (LPM) 65 LPM Diaphragm Pump
Fan diameter 616 mm
Air flow Average 32 m/sec
Main tank capacity (litres) 200
Gearbox 2 Speed + Neutral
Safety device Pressure relief valve (Pump)
Nozzle 12 nozzle (1.0 Ceramic disc + ATR 60)
Controller Manual Control Panel
FARM MACHINERY CATALOGUE 61 Key Benefits
Provides uniform Results in less load flow of water on tractor & saves without pulsation, fuel and superior crop protection
Reduces MRL level leading to saving of Uniform high chemical and fuel volume air output
Best suited for spraying, dipping, thinning & removing due from canopy resulting in evenly sized export quality grapes
62 FARM MACHINERY CATALOGUE HARVESTING
FARM MACHINERY CATALOGUE 63 Thresher
TMCH
64 FARM MACHINERY CATALOGUE Harvesting Thresher Product Description Mahindra Thresher offers speedy threshing operation for crops like wheat, balckgrams , Soyabans, beans and rice in comparison to manual operations and helps reduce drudgery
Utilization Harvest
Helps separate the grains from the husk Better cleaning ability as compared to traditional threshing technique
FARM MACHINERY CATALOGUE 65 Types/Variants
Thresher P - 550 Multi Crop Cutter Maize Sheller (Wheat) Thresher Cum Discar
Paddy thresher
Attributes
Better cleaning ability as compared to traditional threshing technique
Tractor PTO driven application which helps separate the grains from the husk
Fully safe due to prpper size of feed cutter
Thresher can be taken to any place in field for crop threshing
66 FARM MACHINERY CATALOGUE Harvesting Technical Specifications
Parameters 4-Fan (Missile Model)
Length (mm) 4020
Height (mm) 2720
Width (mm) 2240
Drum Size (inches) 58
Tractor Engine (kW) 29.82 kW (40 HP) Rasp Bar Type Thresher Cylinder- Type (Threaded studs used as Rasp Bar) Thresher Cylinder- Lenght (mm) 805
Thresher Cylinder- Diameter (mm) 650
Thresher Cylinder- Cleaning Systems Oscillating Stage Sieve
Capacity kg / hr
Wheat (kg/hr) 1200
Blackgrams (kg/hr) 1500
Soybeans (kg/hr) 1200
Beans (kg/hr) 1200
FARM MACHINERY CATALOGUE 67 Key Benefits
Less fuel consumption Less r/min drop as maximum PTO power due to better engine is attained at 540 r/min torque
everse PTO R ffers easy application enables O operating mechanism reverse rotation of PTO with low operational shaft so that material cost due to lesser load stuck in the drum can be on tractor easily removed
68 FARM MACHINERY CATALOGUE Harvesting TMCH Product Description
Tractor Mounted Combine Harvester gives the complete harvesting solution
In this, a tractor is fitted on the top of specially designed combine harvester
Its is suitable for wheat, paddy, soya, gram, mustard, and maize crops
Utilization Harvesting I When the crops are ready for reaping When the time of sowing next crop is closer
To efficiently harvest a variety of grain crops It gives the complete harvesting solution i.e. cutting, threshing and winnowing For timely preparation of the land for next crop
FARM MACHINERY CATALOGUE 69 Attributes
Four stroke water cooled, direct injection, diesel engine
Less fuel consumption as maximum PTO power is attained at 540 rpm
Reverse PTO rotation removes material stuck in the drum
Technical Specifications
Prime Tyre Size Mahindra Arjun Novo Separating Mechanism Number of Straw Mover Walkers 5 16.9 28, 12 PR - 2 Drive Wheels 550 (Dia) x 1100 Nos Dimensions (mm) (Width) Tyre Size 7-19, 10 PR - 2 Steered Wheels Nos No of Blades 4 Effective Width Blower 3600 (mm) Blade Dimension 1075 x 128 Cutter Bar Working Width 3900 Assembly (mm) Drive V Belt and Pulley No of Blades 49 Length (With 11050 3280(Dia) x 3840 Trailer) Dimensions (mm) (Width) Cutting Length (Without Platform 6400 Trailer) Number of Scoops 16 Overall Dimensions (mm) Width 2565 Type Square Section
1170 (Width) x Height 3710 Rear Beater Dimensions (mm ) 380 (Dia) Total Mass Drive V Belt and Pulley of Combine 5868 (Kgs)
70 FARM MACHINERY CATALOGUE Harvesting
Key Benefits
Better design of Easy to handle due threshing unit reduces to common controls grain damage and with tractor improves threshing efficiency
Single machine can Saves time and Harvest, Thresh, Clean manual effort and & Unload grains into can be self driven on gunny bags roads
FARM MACHINERY CATALOGUE 71 POST HARVEST
72 FARM MACHINERY CATALOGUE Post Harvest Straw Reaper Tipping Trailer
Square Baler
Hydraulic Trolley
Mulcher
Shrub Master
Round Baler
FARM MACHINERY CATALOGUE 73 Straw Reaper
Product Description A reaper is semi automated application used to harvest the crop
It performs 3 operations cut, thresh and clean straw in one pass
Utilization Post Harvest
Efficiently handles straws in field after harvesting To make straw from stubbles It collects the grains left after combine harvest and prevents wastage
74 FARM MACHINERY CATALOGUE Post Harvest
Attributes
Double blower system
Specially design twin tempered blades
Grain try with hand lever
Safety guards Heavy duty gear system provided for moving parts
Technical Specifications Parameters Size 1.44m 1.55 m Chassis (mm) 1574.8 1667.4 Gear Box Heavy Duty Heavy Duty Threshing Drum Diameter (mm) 14422.2 1524 Diameter (mm) 787.4 838.2 Blade 288 320 Basket Height (mm) 1435.1 1536.7 Diameter (mm) 850.9 901.7 Blade 37 39 Blower Width (mm) Double Blower 260.35 Double Blower 260.35 Diameter (mm) 560 660 Diameter of blower fan (mm) 509.6 609.6 Guide Drum Height (mm) 1422.2 1524
Diameter (mm) 560 660 Cutter Bar Reel Height (mm) 2057.4 2209 Reel Diameter (mm) 406.4 406.4 No. of Blades 28 30 No. of Fingers 14 15 Weight 1800 1870 Cutting Capacity 27/kw/hr 29/kw/hr
FARM MACHINERY CATALOGUE 75 Key Benefits
Low on Faster in operation maintenance & due to use of power operational cost from PTO
All its components are Straw reaper performs systematically matched cutting, threshing and to make efficient use of cleaning of straw in one tractor power, consumes operation, thus avoids the less fuel thus saving in wastage of the grains and the operational cost converts stubbles into straw
76 FARM MACHINERY CATALOGUE Post Harvest Tipping Trailer
Product Description Tipping Trailer is basically used for the transportation of the agricultural produces, farming remainders and also weeds from one destination to the other
Utilization Post Harvest | Commercial / Agricultural Purpose
Transportation of goods
FARM MACHINERY CATALOGUE 77 Attributes
Stand for holding in level
Multi point hitch bracket for special applications Material can be unloaded from all 3 sides of the trolly
Easy coupling & de-coupling operation is possible
Technical Specifications Tipping Tipping Tipping Tipping Parameters 5000 kg 5000 kg 5000 kg 5000 kg No. Of Wheels 2W 2W 2W 2W 10 X 6 X Size (feet) 10 X 6 X 2 10 X 6 X 2 10 X 6 X 2 1.5 Chassis (mm) 150 150 150 200
Tyres 10.00 X 20 9.00 X 16 9.00 X 16 9.00 X 20
Axle (mm) 75 75 75 75
Sheet Type (3mm thick) E sheet E sheet C sheet C sheet
No. of Doors 4D 4D 6D 6D With 36” Leaf Spring NA With 36” Leaf Spring Leaf Spring
78 FARM MACHINERY CATALOGUE Post Harvest
Key Benefits
as a stand for ne pin makes it easy H O holding at level when to attach with tractor detached from tractor
FARM MACHINERY CATALOGUE 79 Hydraulic Trolley Product Description Hydraulic Trolley primarily helps in transportation of agriculture produce
It is available in various sizes and can be attached with tractors of different power ranges
Utilization Post Harvest Commercial / Agricultural Purpose
Transportation of goods
80 FARM MACHINERY CATALOGUE Post Harvest
Attributes
Material can be unloaded from all 3 sides of the trolley
Multi point hitch bracket for special applications
Hydraulic cylinder
Available in 4 wheel and 2 wheel type
Technical Specifications
Parameters 3000 kg 4000 kg 6000 kg
Capacity in kg 3000 4000 6000
No. of wheels 2 2 2
Chassis Size in (mm) 125 x 65 150 x 75 150 x 75
Overall: Length x Width x Height (mm) 3000x1800x406 3000x1800x508 3000x1800x711
AXLE MS SQ BARIN (mm) 65 x 65 75 x 75 75 x 75
Bearings 32213/32211 32215/32211 32215/32211
Tyre Size 7.50x16 (16 ply) 9.00x16 (16 ply) 9.00x16 (16 ply)
Loadability 10’x6’x15” 10’x6’x18 10’x6’x24
FARM MACHINERY CATALOGUE 81 Key Benefits
The Mahindra Trolley is available in 4 wheel and One pin makes it easy 2 wheel type suitable to attach with tractor for various applications and manage multiple agricultural yield
Has a stand for holding at level when detached from tractor
82 FARM MACHINERY CATALOGUE Post Harvest Square Baler Product Description
Square baler uniquely designed for collect the straws and packs into square bundles form which ease bale storage and transportation activities
Utilization Post Harvest
Trouble free binding To handles varied types of crop straws Clears the crop residue in the shortest possible time
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power 2 m Pickup - Square Baler Square Bale 41.01 kW (55 HP) 41.01 kW (55 HP) 41.01 kW (55 HP)
FARM MACHINERY CATALOGUE 83
Attributes High Bale density Minimum crop loss due to specially designed 5arm pick-up unit Heavy duty reliable & durable chassis gives Heavy duty Knotter mechanism leads Hydraulic Control Levers for ease of operation. Independent gear drive
Technical Specifications Square Baler Parameters BM 2142 BM 2150 BM 3150 BM 3150H BM 2163 BM 3163 BM 3163H Non- Non- Non- Non- Non- Non- Non- Feeder System Chopper Chopperr Chopper Chopper Chopper Chopper Chopper Number of Twines 2 2 3 3 2 3 3 Bale Size Width (cm) 46 46 46 46 46 46 46 Height (cm) 36 36 36 36 36 36 36 30-140 30-140 30-140 30-140 30-140 30-140 30-140 Length (cm) Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Pick-up Pick-up Control Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Working Width (cm) 142 150 150 150 163 163 163 Number of Tine 95 100 100 95 110 110 105 Number of Tine Bars 5 5 5 5 5 5 5 Plunger Speed 92-104 92-104 92-104 92-104 92-104 92-104 92-104 (Strokes/Min) Knotter Mechanism Twine Twine Twine Twine Twine Twine Twine Type knotter knotter knotter knotter knotter knotter knotter Knotter Fan Standard Standard Standard Standard Standard Standard Standard Twine Storage 8+2 8+2 8+2 8+2 8+2 8+2 8+2 Tractor Require- ment 44.74 kW 44.74 kW 44.74 kW 52.2 kW 52.2 kW 52.2 kW 67.11 kW Min. kW (60hp) (60hp) (60hp) (70hp) (70hp) (70hp) (90hp) PTO Speed (rpm) 540 540 540 540 540 540 540 Machine Dimen- sions Width (cm) 253 253 253 253 253 253 263 Length (cm) 553 553 553 553 553 553 553 Height (cm) 188 188 188 188 188 188 188 Weight (kg) 1920 1930 1970 2450 2000 2020 2620 84 FARM MACHINERY CATALOGUE Post Harvest Round Baler Product Description
Round Baler helps collect the straws and packs them into bundles in round form for easy handling, efficient bale storage and convenient transportation
Utilization Post Harvest
Trouble free binding To handles varied types of crop straws Clears the crop residue in the shortest possible time
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
Round Baler 1 m - Round Bale 44.74 kW (60 HP) 48.47 kW (65 HP) 55.92 kW (75 HP)
FARM MACHINERY CATALOGUE 85
Attributes Aumatically operated twin- binding systems
Bale density can be adjusted
Spring loaded bale ramp allows the bale to roll away frome the baller
Technical Specifications of Round Baler SBA 330 SBA 330 Jumbo 930 Jumbo 1208 Jumbo 1211 Parameters (wide) Bale length (cm) 70 104 93 70 104
Bale diameter (cm) 50 50 60 60 60
Bale weight (kg) 15 - 20 20 - 24 28 - 32 24 - 28 32 - 36
Binding type Jute twine Jute twine Jute twine Jute twine Jute twine
Pickup width 80 120 100 80 120 18.64 - 18.64 - 18.64 - 18.64 - Tractor Power (kW) 26.1 - 44.74 44.74 44.74 44.74 44.74 122 × 146 124 × 180 139 × 169 139 × 146 139 × 180 Dimension (cm) × 122 × 122 × 131 × 131 × 131 Weight (kg) 430 500 565 510 620
86 FARM MACHINERY CATALOGUE Post Harvest
Key Benefits
Easy to attach with Can be used in any the tractor crop straws
Ensures effective coverage area by picking Better operational up straw even in corners economics with of fields. Enables uniform Mahindra tractors pick up even in uneven field condition
FARM MACHINERY CATALOGUE 87 Mulcher Product Description Mahindra Mulcher is used for cleaning crop residue crops like Sugarcane, Banana, Papaya & Coconut. This single operation helps clear the field and prepare it for the next sowing season
Utilization Post Harvest
To clean crop residue
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
Mulcher 1.85 m 37.28 kW (50 HP) 37.28 kW (50 HP) 41.01 kW (55 HP)
88 FARM MACHINERY CATALOGUE Post Harvest Types/Variants
NSML 150 NSML 175 NSML 200
Attributes Trailing wheel for good contoring
Easy to attach with tractor and gives better field coverage.
Can be used as center mounted as well as offset.
Electronically balanced rotor
Technical Specifications
Parameters NSML 150 NSML 175 NSML 200
Overall Length (mm) 1750 1950 2870
Working width (mm) 1600 1800 2020
Hammer (mm) 14 16 18
Falle blade (mm) 42 48 54
Number of belts 4 4 4
Roller Pipe Diameter (mm) 160 160 160
Weight (kg) 480 510 540
33.56 - 55.93 37.28 - 55.93 41.01 - 55.93 Tractor Power kW kW kW (45 - 75 HP) (50 - 75 HP) (55 - 75 HP)
FARM MACHINERY CATALOGUE 89 Key Benefits
oes 3 operations ess fuel consumption D L at one time. i.e. as maximum PTO power cutting, chopping and is attained at 540 r/min mixing with soil
Works on the Best operational surface of soil hence economics with the does not harm the soil, 42.50 kW (57 HP) this helps improve the Arjun Novo fertility of soil for the next season
90 FARM MACHINERY CATALOGUE Post Harvest Shrub Master
Product Description Shrub Master is a tractor mounted machine suitable for controlling and cutting shrubs
Utilization Post Harvest
To remove straws
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
Shrub Master 1.8 m 37.28 kW (50 HP) 37.28 kW (50 HP) 37.28 kW (50 HP)
FARM MACHINERY CATALOGUE 91 Attributes
Sturdy construction Tractor PTO Movement System
Heavy duty
Corrosion resistance
Need less maintenance
Technical Specifications
Parameters
Size 1.52 m
Body Strongly reinforced 3 mm sheet 75 × 40 mm Channel, 50 × 50 × 5 mm Angle & Frame 45 × 45 × 5 mm Angle Linkage 3-Point linkage and lift flat 50 × 12 mm Precision machine with hardened bevel gears in heavy Gear Box cast housing. Tape roller bearing throughout driven with tractor PTO shaft. Number of cutting blades Two
92 FARM MACHINERY CATALOGUE Post Harvest
Key Benefits
Heavy duty and Easy to attach with rugged construction tractor
est operational B ess fuel economics with the L consumption as higher power Mahindra maximum PTO power is tractors [42.5 kW (57 attained at 540 r/min HP) and above]
FARM MACHINERY CATALOGUE 93 COMMERCIAL
94 FARM MACHINERY CATALOGUE Commercial
Post Hole Digger
Front End Loader
Dozer
FARM MACHINERY CATALOGUE 95 Post Hole Digger
Product Description Post Hole Digger allows the fastest solution to dig holes in farm land for various purpose such as erection of electric poles, sapling plantation and erection of fence
Utilization Commercial
For mass plantation purpose For electric pole mounting
96 FARM MACHINERY CATALOGUE Commercial Types/Variants
MFKPHD - 12 MFKPHDS- 18
Attributes
3 point linkage
Heavy duty gearbox
Comes in different sizes from 12 inch to 36 inch hole size
Digs up holes at a very rapid pace of 1 hole per minute Speed of operations can be controlled
Technical Specifications
Parameters MFKPHD- 12 MFKPHDS- 18 29.83 - 37.29 kW 37.29 - 41.01 kW Tractor Power (40 -50 HP) (50 - 55 HP) Hitch Cat II Cat II Compatible with 55 Hp (max.) with Compatible with 55 Hp (max.) with Gear box 3:1 ratio, with 540 r/min input 3:1 ratio, with 540 r/min input PTO Clutch type Clutch type
Auger Length (mm) 1100 1100
Auger Sizes (mm) 304 457
Weight (kg) 148 179
FARM MACHINERY CATALOGUE 97 Key Benefits
Low on Use of power maintenance & from PTO enables operational cost faster operations
Significantly cheaper and faster than manual labor for digging up such holes
98 FARM MACHINERY CATALOGUE Commercial Front End Loader Product Description As its name suggests, loader is the equipment for loading goods like gravel and sand in the trolley, dumpers & high body trucks
Utilization Commercial
Lifting and loading purpose Farm produce movement Soil movement Ginning and pressing units, sand and stone mining, coal mining, road construction
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
500 kg bucket 33.57 kW (45 HP) 33.57 kW (45 HP) 33.57 kW (45 HP) Front End Loader 800 kg bucket 37.28 kW (50 HP) 37.28 kW (50 HP) 37.28 kW (50 HP)
FARM MACHINERY CATALOGUE 99 Attributes
Suitable for Heavy-duty Application
Excellent Bucket Angle - 53 Degree
User Friendly Single Lever Joystick Operation
Self Levelling System
Technical Specifications
Parameters 2.7 m 3.1 m 3.35 m 4 m Loader Pin Height (mm) 2898 2898 3353 3962
Loader Over Height (mm) 2516 3438 - -
Dump Height at 45 degree (mm) 2185 3110 3109 3658
Reach at full height fully dumped (mm) 637 952 - -
Working depth (mm) 150 150 - -
Reach at ground (mm) 1458 2150 2591 3200
Maximum Dump Angle (Degree) 45 45 45 45
Roll back at Ground (Degree) 52 52 52 52
Bucket Capacity m3 0.38 0.4 - -
100 FARM MACHINERY CATALOGUE Commercial
Key Benefits
he ability to lift, T asy maintenance, pry, pull, and push will E low cost & longer life of increase the number of the pivoting pins uses for your tractor
FARM MACHINERY CATALOGUE 101 Dozer Product Description Equipped with a substantial metal plate (known as a blade) used to push large quantities of soil, sand, rubble, or other such material Dozers are widely used for agriculture, land levelling, bagasse handling
Utilization Foundations, Trenches I Land scrapping, Backfilling Applications Dozing, Levelling etc. I Cleaning road Land Development blockages due to land slide etc. Clearing Debris
Attributes
Curved moldboard profile
Replaceable parts
Designed for construction sites
Usage in mines
Suitable Tractor Power Soft Soil Medium Soil Hard Soil Implement Name Specs Engine Power Engine Power Engine Power
Dozer 1.52 m 37.28 kW (50 HP) 37.28 kW (50 HP) 37.28 kW (50 HP)
102 FARM MACHINERY CATALOGUE Commercial
Key Benefits
Suited for Use in Stone levelling, road works, crushing industry construction etc
t has excellent I roper distribution productivity, optimal P of load on front & rear operator comfort and axles robust reliability
Technical Specifications
Parameters
Blade size (mm) 2350 Cutting edge size (mm) 2400 (Hardened & Tempered) Ground clearance (mm) 800 Cutting depth (mm) 120
FARM MACHINERY CATALOGUE 103 104 FARM MACHINERY CATALOGUE