TO PLAY 4+

HIT THE GAS! Tilt your head down. The INSTRUCTION SHEET engine sounds starts in “idle” mode and moves to SPECIFICATIONS “medium speed,” then to “fast speed.” Returning your Toy: SR HELMET head to level returns to “medium speed,” and then Toy No.: M4211 “idle.” After a minute of non-use, the unit will go into Part No.: 0920 “sleep mode.” Press any button to “wake” the unit up. Trim Size: 11 " W x 8.5 " H Folded Size: 5.5 " W x 8.5 " H Type of Fold: 2 panel HEAD DOWN = ACCELERATION/SPEED UP Keep these instructions for future reference as they contain important # colors: One information. CONTENTS Colors: Black Paper Stock: White Offset Paper Weight: 70 lb. EDM No.: SLAM ON THE BRAKES Tilt your head back to slow down. Return your head to level to return to “idle”. HEAD BACK = BRAKING/SLOW DOWN

MOTION ACTIVATED SOUNDS Move your head left or right to hear the sounds of tires screeching into a turn. HELMET DOES NOT PROVIDE PROTECTION FROM INJURY WHILE RIDING A BICYCLE, SCOOTER, SKATEBOARD, OR OTHER VEHICLE. SPEED RACER MOVIE: © Warner Bros. Entertainment Inc. SPEED RACER: ™ Speed Racer Enterprises, Inc. WARNING! This is a toy. Does not provide protection. (s08) © 2007 Mattel, Inc. All Rights Reserved. Requires 3 “AAA” (LR03) alkaline batteries. Batteries

M4211-0920 included are for demonstration purposes. Mattel, Inc. 333 Continental Blvd., El Segundo, CA 90245 U.S.A. Consumer Relations 1 (800) 524-8697 ™ service.mattel.com. • Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You may call us free at/ ND Composez sans frais le 1-800-524-8697. • Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 D SOU R UN 4UB. • Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. E-A-RO • Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, RACE-A-ROUNDRAC SOUNDUCTIONS China. • Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien T IINSTRUCTIONSNSTR Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867. HHELMETELME

4 1 OUTSIDE SPREAD

BATTERY INSTALLATION / REPLACEMENT GET READY TO PLAY Remove battery cover with a Phillips head screwdriver (not included). Remove batteries included for demonstration purposes and dispose of them safely. I = ON; O = OFF; X = TRY ME Insert 3 new "AAA" (LR03) alkaline batteries in the orientation shown. Replace Slide switch to ON. Return the switch to OFF when battery cover and tighten the unit is not in use. screw. For best performance If the product does not function properly, move use only alkaline batteries. the switch from ON to OFF and then ON again. HELMET LINER REMOVED FOR CLARITY Replace batteries if sounds HELMET LINER are faint or distorted. REMOVED FOR CLARITY ADJUST TO FIT DO NOT LET BATTERY SAFETY INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to HEADBAND TOUCH In exceptional circumstances batteries may leak fluids that can cause a chemical the following two conditions: THE TOP OF HELMET burn injury or ruin your product. To avoid battery leakage: (1) This device may not cause harmful interference, and (2) this device must • Non-rechargeable batteries are not to be recharged. accept any interference received, including interference that may cause undesired • Rechargeable batteries are to be removed from the product before being operation. HEIGHT ADJUSTOR charged (if designed to be removable). This equipment has been tested and found to comply with the limits for a Class B WIDTH ADJUSTOR • Rechargeable batteries are only to be charged under adult supervision (if digital device, pursuant to part 15 of the FCC rules. These limits are designed to designed to be removable). provide reasonable protection against harmful interference in a residential • Do not mix alkaline, standard (carbon-zinc), or rechargeable installation. This equipment generates, uses and can radiate radio frequency (nickel-cadmium) batteries. energy and, if not installed and used in accordance with the instructions, may • Do not mix old and new batteries. cause harmful interference to radio communications. However, there is no Adjust the height so that • Only batteries of the same or equivalent type as recommended are to be guarantee that interference will not occur in a particular installation. If this the headband does NOT used. equipment does cause harmful interference to radio or television reception, which INNER SIDE VIEW touch the top of the INNER BACK VIEW • Batteries are to be inserted with the correct polarity. can be determined by turning the equipment off and on, the user is encouraged to • Exhausted batteries are to be removed from the product. try to correct the interference by one or more of the following measures: helmet. Adjust the width • The supply terminals are not to be short-circuited. • Reorient or relocate the receiving antenna. to fit your head. • Dispose of battery(ies) safely. • Increase the separation between the equipment and receiver. • Do not dispose of this product in a fire. The batteries inside may explode or • Connect the equipment into an outlet on a circuit different from that to which leak. the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Protect the environment by not disposing of this product with TO PLAY Note: Changes or modifications not expressively approved by the manufacturer household waste (2002/96/EC). Check your local authority for responsible for compliance could void the user’s authority to operate the ACTIVATE THE WEAPONS REAL MOVIE recycling advice and facilities. equipment. Press the WEAPONS button: PHRASES 1x = “saw blade” Press the PHRASES 2x = “grind” button, to hear any of PLEASE NOTE the 20+ phrases from 3x =“jump jack” the movie. If any of the plastic “pull 4x = “gun” tab” remains after 5x = “canopy closing” (Note: until you removing the helmet press the button again, all other sounds, such from the package, it as braking and accelerating, will be reduced MUST BE REMOVED as by the “closed canopy”.) PHRASES shown before using. 6x = “canopy WEAPONS PULL TAB opening”

2 3 INSIDE SPREAD