Major Fastener Manufacturing Company Major Fastener

Featuring: Centerless Bar Turners • Thread Rollers • Tube & Bar Straighteners • Landis Pipe & Bolt Threaders • CNC Swiss Type Screw Machines • CNC Ve r t i c a l Machining Centers • CNC Turning Centers • Presses • Screw Machines • Centerless Grinders • Centering Machines • Band Saws • Mills • Rotary Furnace • Plus More Major Fastener Manufacturing Company B & G Manufacturing Company, 3067 Unionville Pike, Hatfield, Pennsylvania 19440

REGISTRATION /TERMS AND CONDITIONS: All purchases require cashier’s check or wire transferable funds made payable to Koster Industries, Inc. 12% Buyer’s Premium Will Apply. Accurate 200-Ton Vertical To register online and for more information go to Hydraulic Extrusion www.kosterindustries.com Press

AUCTIONEERS • LIQUIDATORS • APPRAISERS Presort 555 Broadhollow Road, Melville, New York 11747 First Class Mail (631) 454-1766 • Fax (631) 454-1779 U.S. Postage P A I D Minneapolis, MN Permit #3723

A X P / 7 0 1 0 4 5 0

1" Landis Dual Head Pipe & Bolt Threader Index Mdl. GB-30 Swiss Type CNC Automatic Screw Machine Kinefac “Kine-Roller” Mdl. MC-4-F Thread Roller SALE DATES: FEBRUARY 12, 2007 – FEBRUARY 15, 2007 INSPECTION DATES: February 7 and February 8 from 9:00 a.m. to 3:00 p.m. Featuring: Centerless Bar Turners • Thread Rollers • Tube & Bar Straighteners • Landis Pipe & Bolt Threaders • CNC Swiss Type Screw Machines • CNC Ve r t i c a l Machining Centers • CNC Turning Centers • Presses • Screw Machines • Centerless Grinders • Centering Machines • Band Saws • Mills • Rotary Furnace • Plus More Major Fastener Manufacturing Company B & G Manufacturing Company, 3067 Unionville Pike, Hatfield, Pennsylvania 19440 BAR TURNER CNC SWISS TYPE SCREW MACHINES CENTERLESS GRINDERS AUTOMATIC HORIZONTAL BAND SAW Hetran #BT3 Centerless Bar Tu rn e r, Bar Size: (Min-Max) Index Mdl. G B - 3 0 Swiss Type CNC Automatic, [2] Ve r t i c a l Cincinnati #2 Centerless Grinder, Hydraulic & Manual DoAll Mdl. C-80 Automatic Horizontal Band Saw, 4 5 0 3/4" - 3", Bar Length: (Min-Max) 8' - 30', Maximum Thru Feed C u t - O ffs, Front & Rear Slide, Chip Conveyor, Iemca Mdl. D ressers, Work Rest, s/n: 2 1 2 H 1 L - 2 0 7 FPM, Auto Cycle, Coolant, Power Clamping, Automatic Speed: 60 FPM Maximum Spindle RPM 2000, Hand of Feed - TA L 6 5 / 1 2 A M L Magazine Type Bar Feeder, s/n: GB3 0 1 6 1 2 1 Cincinnati #2 Centerless Grinder, Hydraulic & Manual Infeed, s/n: 190-75784 Left to Right, Power Feed Roll Diameter 12", Equipped with: Index Mdl. GB-30 Swiss Type C N C A u t o m a t i c, Front & D ressers, Work Rest, s/n: 2 M 2 H 5 E N - 3 4 RADIAL DRILL 30' Bundle Descrambler & Power Infeed Rack, 30' Entry Power Rear Slides, 8-Position Tu r ret, [2] Vertical Cut=Offs, Chip Feed Descrambler with Slope Rack, Abrasive End Crop Saw C o n v e y o r, Index M B L Magazine Automatic Bar Feeder, OPEN BACK NON-INCLINABLE PRESSES Carlton 5’ x 15” Radial Arm Drill, 12 – 1200 RPM Spindle, s/n: G B 3 0 1 7 1 3 0 for Random Link Bars, Double Pinch Roll Feed, Compensating 60 Ton USI Clearing Mdl. 60P730 “ To rc-Pac” Pre s s , A / C , Power Head Travel, Power Elevation, Coolant, Power Die Head, Hydraulic Actuated Grip Pull Feed, Guide Bar Feed, Index MS25 Swiss Type CNC Automatic, 4-Vertical Slide, Dual Palm, 3" Stroke, 43-1/2" Shut Height, 3" Slide Clamping, 42" L x 26" x 22" 2-Sided Box Table, s/n: 3507 30' Entry Feed Discharge Rack & Catching Bucks, (1) New F ront & Rear Slide, 6-Position Spindle, Bar Feed, Back Finishing, Adjustment, 19" L-R x 25" F-B Bed Area, Shearing Fixture & Cutter Head, Starter, Controls & Disconnects, Adjustable Spindle Stop, Threading, s/n: MS2515147 Feed, s/n: 57-9223 TAPPING MACHINES Diameter While Cutting, Motor Data: 100 HP DC Motor with Solid State Rectifier & Drive [New 1991 – Built Specifically for Futuristic Inc. Bechler C-32 CNC Swiss Type Scre w M c K a y / Wa rco Mdl. G-60-H Open Back Non-Inclinable Autostamper Tapping Machine, Rotary Hopper, Carbide Bar Tu rning], **Located In Toledo, Ohio** M a c h i n e , [3] Vertical Servo Driven Slides, Front & Rear Slides, P re s s , Back Geared, 8" Stroke, Air Clutch, 12" Shut Height, 3/8" Capacity, Part Counter DC Drive Spindles, Approximately 1-1/4" Capacity, To u c h 19" L-R x 24” F-B Bed Area, Dual Palm, s/n: 33188-C Speedy-Cut Automatic Tapping Machine, Rotary Hopper, THREAD ROLLERS S c reen Panel with C RT Mdl. B T- 2 2 2 6 R, s/n: 112034 ENDING & CENTERING MACHINE Citizens Cincom E-32 Swiss Type CNC Screw Machine, Tapping & Stamp Unit, Selfeeder “Newtric” Vertical Drill Kinefac “Kine-Roller” Mdl. MC-4-F Thread Roller, Fanuc 6T Control, 12-Position Tu r ret, Barfeed, s/n: 597 (1983) s/n: T/1-604 C h u rchill-Redman #EC6 Automatic Ending And Centering Head, Tapping Head, Stamp Head, Gripper & Chamfer VERTICAL MACHINING CENTER Machine, Maximum Component Length: Maximum Facing Section, 6-Position Indexing Fixture Table, Hydraulic Unit, Kinefac “Kine-Roller” Mdl. MC-25-F Thread Roller, Diameter - 152mm - 6", Maximum Bar Diameter - 152mm - Push Button Contro l s Vari-Speed Die Spindle Control, s/n: T- 4 5 9 OK K Mdl. MCV-410 Vertical Machining Center, OKK C N C- 6", Minimum Bar Diameter - 25mm - 1", Minimum Component Kinefac “Kine-Roller” Mdl. MC-5-F Thread Roller, Matic G-Control, 20-Position Tool Changer, 50 Taper Spindle, Length with 2 Vices - 152,4mm - 6", Maximum Component TOOL & CUTTER GRINDER Length with 2 Vices - 2438mm - 96", Main Drive: Two Drives s/n: T/I-419 s/n: 645 #2 Cincinnati Tool & Cutter Grinder, Acu-Rite Quick Count I I Both: 7.5 HP, 460V, 3/60/1750 970 RPM with Controls, Kinefac “Kine-Roller” Mdl. MC-5-F Thread Roller, Digital Readout, Tilting/Grinding Head, s/n: 1 D 2 T 6 S - 3 7, s/n: 60036 – Call for Photos, **Located In Toledo, Ohio** s/n: T- 1 8 4 CNC TURNING CENTERS Hybco Work Head, s/n: 5-24-85 Kinefac “Kine-Roller” Mdl. MC-50-F Thread Roller, Okuma Mdl. L C 3 0 - 2 S T, 4-Axis Simulturn CNC Lathe, AUTOMATIC CHUCKERS H u ffman Mdl. HS5 CNC Tool & Cutter Grinder, F i l t r a t i o n Digital RPM, Blade Height Readout, s/n: N/A O S P 5 0 2 0 L Collet, Chip Conveyor, 12-Position Tu r ret, System, s/n: H B 0 1 1 8 8 2 8-Position Lower Tu r ret, s/n: 1952 New Britain #657 Automatic Chucker, Number of Spindles: Kinefac “Kine-Roller” Mdl. MC-6-F, s/n: 730 6, Size of Chucks: 5-3/4", Spindle Speeds, Motor HP 20-30, HORIZONTAL MILLS Waterbury Farrel #30 Flat Die Thread Roller, s/n: N/A Miyano Mdl. 7BC CNC Lathe, Tailstock, 12-Position Tu r re t , Positive Clutch 1200, Maximum Travel Lower Cross Slides Fanuc 6T Control, s/n: S K O 2 3 3 B C ( 1 9 8 2 ) Nichols Hand Feed Horizontal Mill, 6-3/4" x 21" Triple T- S l o t 6" Landis 2-Die Cylindrical Thread Roller, C a p a c i t i e s : 2.543", Maximum Travel Upper Cross Slide 2.313", Motor Table, Arbor Support, s/n: N/A Infeed - 6" Nominal Maximum Diameter, Thrufeed - 4" STRAIGHT SIDE SINGLE CRANK PRESSES Data: 20 HP, 3/60/220/440, 1765 RPM with Controls, Naminal Maximum Diameter In Bar Lengths, Thread Lengths: s/n: 35271, **Located In Toledo, Ohio** Cincinnati “Cinova-80” #307-14 Plain Horizontal Mill with Infeed Up to 9-3/4" Thrufeed Up to 20' (Maximum Convenient 175 Ton Bliss Mdl. S1-175-27-33 Straight Side Single Wa r ner & Swasey #M-2540 Automatic Chucker, M a x i m u m Swivel Vertical Head Attachment, 14" x 62-1/2" Table, Length to Hadle), Die Sizes: Up to 12" Maximum Diameter x Crank Press, 16" Stroke, 22" Shut Height, 4" Adjustment, Chucking Swing 6", Tu rning Stroke, Infinitely Variable 0-5", #50 Spindle Ta p e r, 25 -2000 Spindle RPM, s/n: 3 1 4 2 3 P 5 4 - 2 7 10-1/2" Maximum Width, Spindle Diameter: 4.500" Heat 27" x 33" Bed Area, 27" x 27" RA M Face, Air Clutch, 19" Speed Range: 107-1168 RPM, Maximum Diameter of Die Treated Alloy Steel, Infeed Cycle Speed: Up to 25 Cycles Per Wide x 15" High Windows, Trabon Lube System, Dual Palm, Heads, 4th Position 5-1/8", Motor Data: 15 HP, s/n: 936285, ROTARY FURNACE s/n: H600984 Minute (Fully Automatic), Infeed Stroke Length: 1.250" with **Located In Toledo, Ohio** Rapid Technologies Rotary Furnace, Honeywell Digital Adjustable Length of Rapid Approach & Slow Feed, Main 100 Ton Danly Mdl. SA-100-30-24 Straight Side Single Te m p e r a t u re Control, s/n: 92111 Spindle Drive Motor: 50/25 HP, s/n: N/A, **Located In Crank Pre s s , 16" Stroke, 3" Slide Adjustment, 20" Shut SHAVER Toledo, Ohio** Height to Bed, 50 S P M, Dual Palms, 24" L-R x 17" F-B RA M B rown & Wa rd Shaver, Feed Size: 16'4" L x 1'6" W x 4'6" H, ROTARY TUBE BENDER Face, s/n: 520546013 TUBE & BAR STRAIGHTENER C o n t rol Panel Size: 2'6" L x 2' W x 2'10" H, s/n: B W 0 3 9 , Pedrick Mdl. A6 Rotary Bender, s/n: 737 Bliss #86 Straight Side Single Crank Press, 25" F-B x 26" **Located In Toledo, Ohio** Blaw-Knox (Medart) Model #1 Two-Roll Tube And Bar L-R Bed Area, 10" Stroke, 20" Max. Shut Height, 20" L-R x VIBRATORY FEEDERS S t r a i g h t e n e r, Roll Size: Convex - 10-1/2" Dia. x 12" Face, 10" F-B RA M Face, Air Clutch, Dual Palm Switch, s/n: 34632 OPEN BACK INCLINABLE PRESS Concave - 10" Dia. x 14" Face, Diameter Range: Bars - 1/2" S y n t ron Mdl. R 0 F - 2 4 2 Rotary Vibratory Feeder, C o n v e y o r, Johnson Back Geared Open Back Inclinable Pre s s , Min. to 2-1/2" Max. Tubes - 1/2" Min. to 3-1/2" Max., Two DC SCREW MACHINES s/n: 699411 A p p roximately 75 Ton, 27" F-B x 35" L-R Bed, Bijur Lube, Motors Each: 25 HP, 230V, 1150 RPM, Overall Size 2-1/4" Wa rner & Swasey 1-3/4 – 5, 5-Spindle, Automatic, Air Clutch, s/n: 57171 S y n t ron Mdl. R 0 F-123 Rotary Feeder, 24" Diameter, Straightener: 6'7" L x 6' W x 7'10" H, Feed Rack: 24'8" L x 2'7" s/n: 1515909 C o n v e y o r, s/n: 690906 W x 3'7" H, Feed Rack: 31'8" L x 6'8" W x 3'7" H, Take Aw a y HYDRAULIC PRESSES Conveyor: 25' L x 5'5" W x 5'10" H, Gear Reducer: 10 HP, 7/8" Brown & Wa rd Mdl. CH Short Stroke Screw Machine, TURRET LATHES 2 2 0 / 4 4 0 V, 3/60/865 RPM, Pump Motor: 3/4 HP, 208-230/460V, 11C Collet, Front & Rear Slides, with B & W Automatic 8 Ton Denison Mdl. F F 8 C 0 1 C 2 1 A 6 8 A 7 2 S 0 6 C - F r a m e 3/60/1140 RPM, Coolant Tank with Misc. Parts, Three Tu b e Barfeed, s/n: Bw038 Hydraulic Pre s s , 8" Throat, Dual Lever Control, s/n: 5332-P7 Herbert #2D Tu r ret Lathe, F ront & Rear Slide, 6-Position Tu r ret, 1700 RPM Spindle, s/n: 29-10888-N Cradles Each: 6' L x 2' W x 2'2" H, s/n: 1701 – Call for Photos 1-1/4" Brown & Sharpe #2G Automatic Screw Machine, Unisol Horizontal Extruder Pre s s , 25 H P Hydraulic Motor F ront & Rear Slide, Vertical Slide, Double Chain, Barfeed, Herbert #2D Tu r ret Lathe, s/n: 93-10889-N [As-Is] PIPE & BOLT THREADERS s/n: 10065 Accurate 200 Ton Vertical Hydraulic Extrusion Pre s s , Down Acting, 16" Between Uprights, 16" Diameter Holding 4" Landis, Head # 3 2 R - 7 3, Electro-Craf I Q Series To u c h 1/2" Brown & Sharpe #00G Automatic Screw Machine, F i x t u re, 20" Approximate Stroke, 40" Approximate Daylight, S c reen, Pendant, Coolant, s/n: 3 2 C L 1 B - 3 4 F ront & Rear Slide, Vertical Slide, Double Chain Drive, A p p roximately 100 HP Hydraulic Unit, s/n: N/A 1" Landis Dual Head, Lanco Die Heads, [2] S B C - 2 0 0 B s/n: 80495 175-Ton Bliss Spindle Speed Controllers, Automatic Carriage Infeed, Mdl. S1-175-27-33 s/n: 8 C 1 2 A - 3 8 X Straight Side Single Crank Press

Kinefac “Kine-Roller” Mdl. MC-5-F Thread Roller 19 8 2

Miyano Mdl. 7BC CNC Lathe C i n c i n n ati #2 Centerless Grinder SALE DATES: FEBRUARY 12, 2007 – FEBRUARY 15, 2007 INSPECTION DATES: February 7 and February 8 from 9:00 a.m. to 3:00 p.m.

Corporate Office: Branch Office: 555 Broadhollow Road, Melville, NY 11747 Boston, Massachusetts (631) 454-1766 • Fax: (631) 454-1779 (978) 474-4442 • Fax: (978) 474-4673

AUCTIONEERS • LIQUIDATORS • APPRAISERS http://www.kosterindustries.com • e-mail: [email protected]