Civil Engineering Department (CED)

Total Page:16

File Type:pdf, Size:1020Kb

Civil Engineering Department (CED) CED PROGRAMME OF WORK Civil Engineering Department (CED) B U R E A U O F I N D I A N S T A N D A R D S MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG NEW DELHI 110002 1 CIVIL ENGINEERING DEPARTMENT Title of the Committee Page No. CED 2 CEMENT AND CONCERTE SECTIONAL COMMITTEE 3 – 13 CED 3 SANITARY APPLIANCES AND WATER FITTINGS SECTIONAL COMMITTEE 14 – 19 CED 4 BUILDING LIMES AND GYPSUM PRODUCTS SECTIONAL COMMITTEE 20 - 25 CED 5 FLOORING, WALL FINISHING AND ROOFING SECTIONAL COMMITTEE 26 – 31 CED 6 STONES SECTIONAL COMMITTEE 32 – 35 CED 7 STRUCTURAL ENGINEERING AND STRUCTURAL SECTIONS 36 – 41 SECTIONAL COMMITTEE CED 9 TIMBER AND TIMBER STORES SECTIONAL COMMITTEE 42 – 53 CED 11 DOORS, WINDOWS AND SHUTTER SECTIONAL COMMITTEE 54 – 57 CED 12 FUNCTIONAL REQUIREMENTS IN BUILDINGS SECTIONAL COMMITTEE 58 – 59 CED 13 BUILDING CONSTRUCTION PRACTICES INCLUDING PAINTING, VARNISHING 60 – 70 AND ALLIED FINISHES SECTIONAL COMMITTEE CED 15 BUILDERS' HARDWARE SECTIONAL COMMITTEE 71 – 74 CED 20 WOOD AND OTHER LIGNOCELLULOSIC PRODUCTS SECTIONAL COMMITTEE 75 – 84 CED 22 FIRE FIGHTING SECTIONAL COMMITTEE 85 – 96 CED 24 PUBLIC HEALTH ENGINEERING SECTIONAL COMMITTEE 97 – 101 CED 29 CONSTRUCTION MANAGEMENT (INCLUDING SAFETY IN CONSTRUCTION) 102 – 104 SECTIONAL COMMITTEE CED 30 CLAY PRODUCTS FOR BUILDINGS SECTIONAL COMMITTEE 105 – 107 CED 35 FURNITURE SECTIONAL COMMITTEE 108 – 112 CED 36 FIRE SAFETY SECTIONAL COMMITTEE 113 – 116 CED 37 STRUCTURAL SAFETY SECTIONAL COMMITTEE 117 CED 38 SPECIAL STRUCTURES SECTIONAL COMMITTEE 118 CED 39 EARTHQUAKE ENGINEERING SECTIONAL COMMITTEE 119 – 120 CED 41 WATER-PROOFING AND DAMP-PROOFING SECTIONAL COMMITTEE 121 – 123 CED 43 SOIL AND FOUNDATION ENGINEERING SECTIONAL COMMITTEE 124 – 133 CED 44 METHODS OF MEASUREMENT OF WORKS OF CIVIL ENGINEERING 134 – 136 (EXCLUDING WATER RESOURCES DEVELOPMENT DIVISION) SECTIONAL COMMITTEE CED 46 NATIONAL BUILDING CODE SECTIONAL COMMITTEE 137 – 138 CED 47 PORTS, HARBOURS AND OFFSHORE INSTALLATIONS SECTIONAL 139 COMMITTEE CED 48 ROCK MECHANICS SECTIONAL COMMITTEE 140 – 143 CED 50 PLASTIC PIPING SYSTEMS SECTIONAL COMMITTEE 144 – 151 CED 51 PLANNING, HOUSING AND PREFABRICATED CONSTRUCTION 152 – 155 SECTIONAL COMMITTEE CED 53 CEMENT MATRIX PRODUCTS SECTIONAL COMMITTEE 156 – 163 CED 54 CONCRETE REINFORCEMENT SECTIONAL COMMITTEE 164 – 165 CED 55 SIEVES, SIEVING AND OTHER SIZING METHODS 166 – 167 SECTIONAL COMMITTEE CED 56 HILL AREA DEVELOPMENT ENGINEERING SECTIONAL COMMITTEE 168 CED 57 CYCLONE RESISTANT STRUCTURES SECTIONAL COMMITTEE 169 2 CED 2 CEMENT AND CONCRETE SCOPE STANDARDIZATION IN THE FIELD OF ALL TYPES OF CEMENT, POZZOLANA, TESTING SAND, CONCRETE, AGGREGATES, INSTRUMENTS FOR CEMENT AND CONCRETE TESTING, CEMENT PLANT MACHINERY AND FERROCEMENT LIAISON: ISO/TC 71 (P) CONCRETE, REINFORCED CONCRETE AND PRE-STRESSED CONCRETE ISO/TC 71/SC 1 TEST METHODS FOR CONCRETE ISO/TC 71/SC 3 CONCRETE PRODUCTION AND EXECUTION OF CONCRETE STRUCTURES ISO/TC 71/SC 4 PERFORMANCE REQUIREMENTS FOR STRUCTURAL CONCRETE ISO/TC 71/SC 6 NON-TRADITIONAL REINFORCING MATERIALS FOR CONCRETE STRUCTURES ISO/TC 74 (P) CEMENT AND LIME Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED 1 IS 269:1989 Specification for ordinary Portland cement, 33 grade (fourth Oct 2008 8 revision) 2 IS 383:1970 Specification for coarse and fine aggregates from natural Jan 2007 sources for concrete (second revision) 3 IS 455:1989 Specification for Portland slag cement (fourth revision) Feb 2005 5 4 IS 456:2000 Code of practice for plain and reinforced concrete (fourth revision) Aug 2005 3 5 IS 457:1957 Code of practice for general construction of plain and Feb 2005 reinforced concrete for dams and other massive structures 6 IS 516:1959 Method of test for strength of concrete Oct 2008 2 7 IS 650:1991 Specification for standard sand for testing of cement (second Oct 2008 revision) 8 IS 1199:1959 Methods of sampling and analysis of concrete Oct 2008 9 * IS 1343:1980 Code of practice for prestressed concrete (first revision) Feb 2004 1 10 IS 1344:1981 Specification for calcined clay pozzolana (second revision) Oct 2008 1 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS Page 1 of 11 3 Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. 11 IS 1489(Part 1):1991 Specification for Portland pozzolana cement: Feb 2005 4 Part 1 Flyash based (third revision) 12 IS 1489(Part 2):1991 Specification for Portland-pozzolana cement: Feb 2005 3 Part 2 Calcined clay based (third revision) 13 IS 1727:1967 Methods of test for pozzolanic materials (first revision) Oct 2008 1 14 IS 2386(Part 1):1963 Methods of test for aggregates for concrete: Jan 2007 3 Part 1 Particle size and shape 15 IS 2386(Part 2):1963 Methods of test for aggreegates for concrete: Jan 2007 1 Part 2 Estimation of deleterious materials and organic impurities 16 IS 2386(Part 3):1963 Methods of test for aggregates for concrete: Jan 2007 Part 3 Specific gravity, density, voids, absorption and bulking 17 IS 2386(Part 4):1963 Methods of test for aggregates for concrete: Jan 2007 3 Part 4 Mechanical properties 18 IS 2386(Part 5):1963 Methods of test for aggregates for concrete : Jan 2007 Part 5 Soundness 19 IS 2386(Part 6):1963 Methods of test for aggregates for concrete : Jan 2007 2 Part 6 Measuring mortar making properties of fine aggregates 20 IS 2386(Part 7):1963 Methods of test for aggregates for concrete : Jan 2007 1 Part 7 Alkali aggregate reactivity 21 IS 2386(Part 8):1963 Methods of test for aggregates for concrete: Jan 2007 1 Part 8 Petrographic examination 22 IS 2430:1986 Methods for sampling of aggregates for concrete (first revision) Feb 2005 23 IS 2502:1963 Code of practice for bending and fixing of bars for concrete Oct 2008 reinforcement 24 IS 2505:1992 Concrete vibrators - immersion type - general requirements Oct 2008 (third revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS Page 2 of 11 4 Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. 25 IS 2506:1985 General requirements for screed board concrete vibrators Feb 2005 (first revision) 26 IS 2645:2003 Integral waterproofing compounds for cement mortar and Dec 2007 concrete - Specification (second revision) 27 IS 2770(Part 1):1967 Methods of testing bond in reinforced concrete: Jan 2007 Part 1 Pull-out test 28 IS 3085:1965 Method of test for permeability of cement mortar and concrete Jan 2007 29 * IS 3370(Part 1):1965 Code of practice for concrete structures for the storage of Feb 2004 1 liquids: Part 1 General requirements 30 * IS 3370(Part 2):1965 Code of practice for concrete structures for the storage of Feb 2004 2 liquids: Part 2 Reinforced concrete structures 31 IS 3370(Part 3):1967 Code of practice for concrete structures for the storage of Oct 2008 1 liquids: Part 3 Prestressed concrete structures 32 IS 3370(Part 4):1967 Code of practice for concrete structures for the storage of Oct 2008 2 liquids: Part 4 Design tables 33 IS 3466:1988 Specification for masonry cement (second revision) Oct 2008 4 34 IS 3535:1986 Methods of sampling hydraulic cement (first revision) Oct 2008 35 IS 3558:1983 Code of practice for use of immersion vibrators for Oct 2008 consolidating concrete (first revision) 36 IS 3812(Part 1):2003 Specification for pulverized fuel ash Dec 2007 Part 1 For use as pozzolana in cement, cement mortar and concrete (second revision) 37 IS 3812(Part 2):2003 Specification for pulverized fuel ash Dec 2007 Part 2 For use as admixture in cement mortar and concrete (second revision) 38 IS 4031(Part 1):1996 Methods of physical tests for hydraulic cement: Aug 2005 Part 1 Determination of fineness by dry sieving (second revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS Page 3 of 11 5 Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. 39 IS 4031(Part 2):1999 Methods of physical tests for hydraulic cement: Oct 2008 Part 2 Determination of fineness by specific surface by Blaine air permeability method (second revision) 40 IS 4031(Part 3):1988 Methods of physical tests for hydraulic cement: Feb 2005 1 Part 3 Determination of soundness (first revision) 41 IS 4031(Part 4):1988 Methods of physical tests for hydraulic cement: Feb 2005 1 Part 4 Determination of consistency of standard cement paste (first revision) 42 IS 4031(Part 5):1988 Methods of physical tests for hydraulic cement: Feb 2005 1 Part 5 Determination of initial and final setting times (first revision) 43 IS 4031(Part 6):1988 Methods of physical tests for hydraulic cement: Feb 2005 3 Part 6 Determination of compressive strength of hydraulic cement (other than masonry cement) (first revision) 44 IS 4031(Part 7):1988 Methods of physical tests for hydraulic cement: Feb 2005 Part 7 Determination of compressive strength of masonry cement (first revision) 45 IS 4031(Part 8):1988 Methods of physical tests for hydraulic cement: Feb 2005 Part 8 Determination of transverse and compressive strength of plastic mortar using prism (first revision) 46 IS 4031(Part 9):1988 Methods of physical tests for hydraulic cement: Feb 2005 Part 9 Determination of heat of hydration (first revision) 47 IS 4031(Part 10):1988 Methods of physical tests for hydraulic cement: Feb 2005 Part 10 Determination of drying shrinkage (first revision) 48 IS 4031(Part 11):1988 Methods of physical tests for hydraulic cement: Feb 2005 Part 11 Determination of density
Recommended publications
  • 2018年 Tmb決議(1/2018~122/2018)
    RESOLUTIONS ADOPTED BY THE TECHNICAL MANAGEMENT BOARD IN 2018(1/2018~ 122/2018) 2018年 TMB決議(1/2018~122/2018) 英和対訳 一般財団法人 日本規格協会 国際標準化ユニット RESOLUTIONS ADOPTED BY THE TECHNICAL MANAGEMENT BOARD IN 2018 TECHNICAL MANAGEMENT BOARD RESOLUTION 1/2018 (corrected 2018-01-05) Adopted by correspondence on 2018-01-03 Appointment of Technical Committee Chairpersons (December 2017) The Technical Management Board, Appoints the following chairpersons of the respective technical committees for the terms as indicated below: Re-nomination TC Nominated by Term ISO/TC 46 Ms Gaëlle BEQUET (AFNOR) 2018-2022 ISO/TC 176 Ms Katie ALTOFT (SCC) 2018-2019 Nomination TC ISO/TC 72 Dr Joachim BINNIG (SNV) 2018-2023 ISO/TC 138 Mr Shigeki FUJII (JISC) 2018-2020 ISO/TC 171 Mr Alan SHIPMAN (BSI) 2018-2023 ISO/TC 183 Mr Mark O’DWYER (SA) 2018-2023 ISO/TC 228 Mr Manuel OTERO (UNE) 2018-2020 ISO/TC 244 Mr Michio NAKAYAMA (JISC) 2018-2020 ISO/TC 265 Mr William SPENCE (SCC) 2018-2020 ISO/TC 272 Dr Linzi WILSON-WILDE (SA) 2018-2020 Vice-Chair ISO/TC 176 Dr Lizhi WANG (SAC) 2018-2020 ISO/TC 228 Mr Habib BOUSLAMA (INNORPI) 2018-2020 TECHNICAL MANAGEMENT BOARD RESOLUTION 2/2018 Adopted by correspondence on 2018-01-03 Modification of the title of ISO/TC 162 The Technical Management Board, Approves the modified title of ISO/TC 162 on Doors and windows revised as follows: Modified title: (deletions are indicated by strikeout and additions underlined) Doors, and windows and curtain walling TECHNICAL MANAGEMENT BOARD RESOLUTION 3/2018 Adopted by correspondence on 2018-01-05 Registration
    [Show full text]
  • Products Subject to Pvoc Programme
    UGANDA NATIONAL BUREAU OF STANDARDS LIST OF PRODUCTS UNDER COMPULSORY STANDARDS SUBJECT TO THE PVOC PROGRAMME AS AT AUGUST 2015 GROUP I – TOYS PR. NO. PRODUCT ITEMS HS CODES Applicable Uganda Standards I-01 TOYS, INCL. VIDEO GAMES AND OTHER 9503.00.00 Compulsory Uganda Standards ELECTRONIC TOYS, DOLLS, TRICYCLES, NON 1. US ISO 8124-1:2007, Safety of toys — Part 1: ELECTRIC MUSICAL INSTRUMENTS ETC Safety aspects related to mechanical and physical properties (2nd Edition) 2. US ISO 8124-2:2007, Safety of toys — Part 2: Flammability (2nd Edition) 3. US ISO 8124-3:2010/Amd.1:2014, Safety of toys — Part 3: Migration of certain elements (2nd Edition) 4. US ISO 8124-4:2010, Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use I-02 GYMNASIUM, FITNESS AND HEALTH RELATED 9506.91.00 PRODUCTS. International Standards ASTM Standards, F 1749, Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels; F 2106, Test Method for Treadmills; F 2115, Specification for Standards for Treadmills; F 2216, Specification for Selectorized Strength Equipment; F 2276, Specification for Fitness Equipment; 2015-08-06 1/161 UGANDA NATIONAL BUREAU OF STANDARDS F 2277, Test Method for Selectorized Strength Equipment. F3021-13 Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments I-03 BABY TROLLEY AND OTHER RELATED PRODUCTS 8715.00.00 Compulsory Uganda Standards INCL. BABY CRIB, BABY ROCKER US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers International Standards ASTM F833 - 11 Standard Consumer Safety Performance Specification for Carriages and Strollers AS/NZS 2088:2000 ‘Prams and strollers— safety requirements’.
    [Show full text]
  • Catalogue of International Standards Used in the Petroleum and Natural Gas Industries
    Catalogue of international standards used in the petroleum and natural gas industries Report No. 362 February 2012 update P ublications Global experience The International Association of Oil & Gas Producers has access to a wealth of technical knowledge and experience with its members operating around the world in many different terrains. We collate and distil this valuable knowledge for the industry to use as guidelines for good practice by individual members. Consistent high quality database and guidelines Our overall aim is to ensure a consistent approach to training, management and best prac- tice throughout the world. The oil & gas exploration & production industry recognises the need to develop consist- ent databases and records in certain fields. The OGP’s members are encouraged to use the guidelines as a starting point for their operations or to supplement their own policies and regulations which may apply locally. Internationally recognised source of industry information Many of our guidelines have been recognised and used by international authorities and safety and environmental bodies. Requests come from governments and non-government organisations around the world as well as from non-member companies. Disclaimer Whilst every effort has been made to ensure the accuracy of the information contained in this publica- tion, neither the OGP nor any of its members past present or future warrants its accuracy or will, regard- less of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer.
    [Show full text]
  • Isoupdate June 2018
    ISO Update Supplement to ISOfocus June 2018 International Standards in process ISO/CD 8501-4 Preparation of steel substrates before applica- tion of paints and related products — Visual An International Standard is the result of an agreement between assessment of surface cleanliness — Part 4: the member bodies of ISO. A first important step towards an Interna- Initial surface conditions, preparation grades tional Standard takes the form of a committee draft (CD) - this is cir- and flash rust grades in connection with high- culated for study within an ISO technical committee. When consensus pressure water jetting has been reached within the technical committee, the document is ISO/CD 8502-6 Preparation of steel substrates before applica- sent to the Central Secretariat for processing as a draft International tion of paints and related products — Tests for Standard (DIS). The DIS requires approval by at least 75 % of the the assessment of surface cleanliness — Part member bodies casting a vote. A confirmation vote is subsequently 6: Extraction of soluble contaminants for analy- carried out on a final draft International Standard (FDIS), the approval sis — The Bresle method criteria remaining the same. ISO/CD 8502-9 Preparation of steel substrates before applica- tion of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric deter- mination of water-soluble salts ISO/CD 8504-2 Preparation of steel substrates before applica- tion of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning CD registered TC 43 Acoustics ISO/CD 21388 Acoustics — Hearing aid fitting management Period from 01 May to 31 May 2018 TC 44 Welding and allied processes These documents are currently under consideration in the technical ISO/CD Welding — Electron and laser-beam welded committee.
    [Show full text]
  • Diretoria De Patentes
    PATENTES, DESENHOS INDUSTRIAIS, CONTRATOS, PROGRAMAS DE COMPUTADOR, INDICAÇÕES GEOGRÁFICAS o REVISTA DA PROPRIEDADE INDUSTRIAL N 1983 06 de Janeiro de 2009 SEÇÃO I REPÚBLICA FEDERATIVA DO BRASIL Presidente Luís Inácio Lula da Silva MINISTÉRIO DO DESENVOLVIMENTO, INDÚSTRIA E COMÉRCIO EXTERIOR Ministro do Desenvolvimento, Indústria e Comércio Exterior Miguel João Jorge Filho INSTITUTO NACIONAL DA PROPRIEDADE INDUSTRIAL PRESIDENTE PARANÁ Jorge de Paula Costa Ávila Chefe: Renee Fernando Senger Pernambuco Rua Marechal Deodoro, 344, 16º andar Universitária Federal de Pernambuco - UFPE VICE-PRESIDENTE Ademir Tardelli Edifício Atalaia, Centro, Curitiba - PR Av. Prof. Moraes Rego, 1235 – Campus Universitário CEP: 80010-909 Bairro - Engenho do Meio CHEFE DE GABINETE Telefone/Fax: (0XX-41) 3322-4411 Recife - PE - CEP: 50670-920 Josefina Sales de Oliveira RIO GRANDE DO SUL Tel/Fax:(0XX-81) 3453-8145 e 3271-1223 Chefe: Vera Lúcia de Seixas Grimberg Piauí DIRETORIA DE ARTICULAÇÃO E INFORMAÇÃO TECNOLÓGICA Rua Sete de Setembro, 515 – 5º andar - Centro Av. João XXIII, n° 865 Marco Antônio Lima Porto Alegre - RS - CEP: 90010-190 Espaço Cidadania Telefone/Fax.: (0XX-51) 3226-6909 e 3226-6422 Teresina - PI - CEP: 64049-010 PROCURADORIA GERAL SÃO PAULO Tel.:(0XX-86) 3235-9616/3218-1838 Mauro Sodré Maia Chefe: Maria dos Anjos Marques Buso Fax:(0XX-86) 3218-1838 DIRETORIA DE PATENTES Rua Tabapuã, 41 - 4º andar - Itaim-Bibi Rio Grande do Norte Carlos Pazos Rodrigues São Paulo - SP - CEP: 04533-010 SECRETÁRIA DO DESENVOLVIMENTO ECONÔMICO – DIRETORIA DE MARCAS
    [Show full text]
  • Universidade Candido Mendes Instituto a Vez Do Mestre Pós-Graduação “Lato Sensu”
    1 UNIVERSIDADE CANDIDO MENDES Wi INSTITUTO A VEZ DO MESTRE PÓS-GRADUAÇÃO “LATO SENSU” O DESENVOLVIMENTO E A EVOLUÇÃO DO CONTROLE ESTATÍSTICO DE QUALIDADE E SUA APLICAÇÃO NAS ÁREAS DE PRODUÇÃO DE BENS DE CAPITAL E SERVIÇOS O PANORAMA BRASILEIRO Carlos Alberto Gonçalves Alfredo ORIENTADORA: Profª. Ana Paula Ribeiro Rio de Janeiro 2010 2 UNIVERSIDADE CANDIDO MENDES INSTITUTO A VEZ DO MESTRE PÓS-GRADUAÇÃO “LATO SENSU” O DESENVOLVIMENTO E A EVOLUÇÃO DO CONTROLE ESTATÍSTICO DE QUALIDADE E A SUA APLICAÇÃO NAS DE PRODUÇÃO DE BENS DE CAPITAL E SERVIÇOS O PANORAMA BRASILEIRO Carlos Alberto Gonçalves Alfredo Apresentação de monografia ao Conjunto Universitário Candido Mendes como condição prévia para a conclusão do Curso de Pós-Graduação Lato Sensu em Administração da Qualidade. Rio de Janeiro 2010 3 AGRADECIMENTOS Agradeço aos meus pais que, com a sua dedicação, amor e carinho me conduziram na edificação da minha personalidade, permitindo-me chegar até aqui. A minha esposa Kylma e aos meus filhos, Daniel, Davi, Nathália e Mere, pelo amor e incentivos recebidos durante a minha caminhada. Aos meus amigos, Wagner, Dr. Luiz de Rose e Padre Marcos William pela sua presença sempre amiga e presente, incentivo e apoio. A todos muito obrigado. 4 DEDICATÓRIA Dedico este trabalho ao amor de Deus, sem o qual nada poderia ser realizado. “Tomou então Samuel uma pedra e a pôs entre Mispa e Sem, e lhe chamou Ebenézer, e disse: até aqui nos ajudou o Senhor” (I Samuel, 7:12). 5 RESUMO O Controle Estatístico de Qualidade – CEQ é formado por um conjunto de atividades semelhantes entre si, abrangendo: Estudos de capacitação de processos, Inspeção por amostragem e estudos experimentais.
    [Show full text]
  • List of ISO Standards - Wikipedia, the Free Encyclopedia
    List of ISO standards - Wikipedia, the free encyclopedia Log in / create account Wikipedia: Making Life Easier. [Collapse] Article Discussion Edit this page History $3,376,364 Our Goal: $6 million Donate Now » List of ISO standards Navigation From Wikipedia, the free encyclopedia ● Main page ● Contents This is a list of ISO standards that are discussed in Wikipedia articles. For a list of all the more than 16,000 ISO standards (as of ● Featured content 2007), see the ISO Catalogue. ● Current events About 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely/publicly ● Random article [ ] available. 1 Search Contents [hide] ● 1 ISO 1–ISO 999 Interaction ● 2 ISO 1000–ISO 9999 ● About Wikipedia ● 3 ISO 10000–ISO ● Community portal 19999 ● Recent changes ● 4 ISO 20000–ISO ● Contact Wikipedia 29999 ● Donate to Wikipedia ● 5 ISO 30000–ISO ● Help 39999 Toolbox ● 6 Other standards ● What links here ● 7 See also ● Related changes ● 8 References ● Upload file ● 9 External links http://en.wikipedia.org/wiki/List_of_ISO_standards (1 of 20)05/12/2008 10:36:09 • List of ISO standards - Wikipedia, the free encyclopedia ● Special pages ● Printable version ISO 1–ISO 999 [edit] ● Permanent link ● ISO 1 Standard reference temperature for geometrical product specification and verification ● Cite this page ● ISO 3 Preferred numbers Languages ● ISO 4 Rules for the abbreviation of title words and titles of publications ● Deutsch ● ISO 7 Pipe threads where pressure-tight joints are made on the threads ● Español ● ISO 9 Information and documentation — Transliteration of Cyrillic characters into Roman characters — Slavic and non-Slavic ● ••••• languages ● Français ● ● •••••• ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch) ● Íslenska ● ISO 31 Quantities and units ● Italiano ● ISO 68-1 Basic profile of metric screw threads ● Nederlands ● ISO 216 paper sizes, e.g.
    [Show full text]
  • Merlin Partner User Guide
    Merlin Partner User Guide Merlin - Version 1.18 Enterprise Europe Network 2 Merlin User Guide - updated 28 April 2015 Table of contents 1. Introduction 9 About Merlin 9 About this guide 9 Accessing Merlin 10 Merlin Logout 10 Browser Optimisation 11 What if I need help? 11 Icon Legend 11 Navigating Merlin 12 Exporting your Content 13 The Dashboards 13 Using the Filters 15 Clear Filters 16 Working with Technology, Market and NACE Keywords 17 When should I use different levels of keywords? 17 How do I select keywords in Merlin? 18 Where can I find a current list of Technology, Market and NACE keywords? 18 Who to Contact 18 Feedback 19 2. Change History 21 New features 21 Changes that impact your work 21 Features under development 21 3. Managing Profiles 23 Profile Workflow Overview 23 Profile creation 24 Internal Review Process 24 External Review Process 24 Blocking Scores 25 Enterprise Europe Network Profile expiry date 25 My Profiles Dashboard 25 Create a new profile 27 Review a profile 29 Edit a Draft profile 32 My Expired Profiles Dashboard 32 Modifying profile deadlines 33 Delete a profile 34 Archive a profile 35 Change your external reviewer status 35 Update your external reviewer information 36 Resign as an external reviewer 37 Reassign Profiles 38 4. Disseminating Profiles 39 Profile Search - Intranet 39 Intranet Simple Search 39 Intranet Advanced Search 40 Profile Search - Internet 43 Export Profiles 43 Export a Single Profile 43 Export All Profiles From Search Results 45 Merlin POD Web Service 45 5. Managing Clients and Queries
    [Show full text]
  • National Standarts Development Medium-Term
    APPROVED 2019-01-08 NATIONAL STANDARDIZATION PLAN FOR 2016-2019 (2016/17, 2017/18 & 2018/19) Version 3.0 January 2019 Page 2 of 146 Table of Contents 1. Introduction…………..……………………………………………………………...........................................................4 2. Summary on national priorities and expected benefits.....................................................................6 2.1. Economic priorities.......................................................................................................................6 2.2. Non-economic priorities ……….…………………………………………………………………………………………………..11 2.3. Government policy priorities .......................................................................................................12 2.4 Stakeholders requests..........................................................................................................................................13 2.5. Selected Sectors of standardization and expected benefits ……...................................................14 3. Needed human and financial resources and work items implementation plan...........................................20 3.1 Human resources by type of work item and category….............................................................. .21 3.1.1 Human resources needed over the three-year period by section..........................................24 3.2 Financial resources needed over the three-year period by section...........................................25 Annex I Priority standardization work items implementation matrix over
    [Show full text]
  • Schedule of Compulsory Uganda Standards As at 31 March 2019
    UGANDA NATIONAL BUREAU OF STANDARDS SCHEDULE OF COMPULSORY UGANDA STANDARDS AS AT 31 MARCH 2019 1 | P a g e TABLE OF CONTENTS FOOD AND AGRICULTURE ........................................................................................ 1 ELECTROTECHNOLOGY PRODUCTS ....................................................................... 36 METROLOGY ............................................................................................................ 70 ENGINEERING PRODUCTS ...................................................................................... 73 CHEMICAL AND CONSUMER PRODUCTS .............................................................. 112 MANAGEMENT SYSTEMS ...................................................................................... 155 INDEX ..................................................................................................................... 172 i | P a g e FOOD AND AGRICULTURE 6. US EAS 6:2017, Fresh pineapple — Specification This Uganda Standard specifies the requirements, 1. US EAS 1:2017, Wheat flour — Specification (2nd sampling and test methods for commercial varieties of Edition) pineapple grown from Ananas comosus (L.) Merr. of This Uganda Standard specifies requirements, the Bromeliaceae family, to be supplied fresh to the sampling and test methods for wheat flour prepared consumer. This standard does not apply to pineapple from common wheat, Triticum aestivum L. or club for ornamental use or industrial processing. (This wheat, Triticum compactum Host, or mixtures thereof Uganda
    [Show full text]
  • Konference 2009.Indd
    VŠB – Technická univerzita Ostrava Fakulta bezpečnostního inženýrství Sdružení požárního a bezpečnostního inženýrství Hasičský záchranný sbor Moravskoslezského kraje Recenzované periodikum Požární ochrana 2009 Sborník přednášek - I. díl XVIII. ročníku mezinárodní konference Ostrava, VŠB – TU 9. – 10. září 2009 VŠB – Technická univerzita Ostrava Fakulta bezpečnostního inženýrství Sdružení požárního a bezpečnostního inženýrství Hasičský záchranný sbor Moravskoslezského kraje Recenzované periodikum Požární ochrana 2009 Sborník přednášek XVIII. ročníku mezinárodní konference pod záštitou rektora Vysoké školy báňské – Technické univerzity Ostrava Prof. Ing. Tomáše Čermáka, CSc. a generálního ředitele HZS ČR genmjr. Ing. Miroslava Štěpána Ostrava, VŠB – TU 9. – 10. září 2009 Vysoká škola báňská – Technická univerzita Ostrava Fakulta bezpečnostního inženýrství Lumírova 13 700 30 Ostrava - Výškovice Česká republika Sdružení požárního a bezpečnostního inženýrství se sídlem VŠB – TU Ostrava Lumírova 13 700 30 Ostrava - Výškovice Česká republika Hasičský záchranný sbor Moravskoslezského kraje Výškovická 40 700 30 Ostrava - Zábřeh Recenzované periodikum POŽÁRNÍ OCHRANA 2009 Sborník přednášek XVIII. ročníku mezinárodní konference Recenzenti: Doc. Ing. Vilém Adamec, Ph.D. Ing. Petr Bebčák, Ph.D. Doc. Ing. Jaroslav Damec, CSc. Doc. Dr. Ing. Aleš Dudáček Doc. Dr. Ing. Miloš Kvarčák Ing. Vasil Silvestr Pekar Ing. Pavel Vaniš, CSc. Editor: Doc. Dr. Ing. Michail Šenovský Pro SPBI vytiskl: Tiskárna Kleinwächter, Frýdek – Místek www.tiskarnaklein.cz © Sdružení požárního a bezpečnostního inženýrství ISBN: 978-80-7385-067-8 Odborný garant konference Chairman doc. Dr. Ing. Michail Šenovský - VŠB - TU Ostrava Vědecký výbor konference Scientifi c Programe Committee doc. Dr. Ing. Aleš Dudáček – děkan FBI, VŠB – TU Ostrava genmjr. Ing. Miroslav Štěpán – generální ředitel HZS ČR st. bryg. prof. dr hab. inż. Zoja Bednarek – rektor SGSP Warszawa brig.
    [Show full text]
  • National Standardization Plan for 2016-2019
    APPROVED 2018-01-11 NATIONAL STANDARDIZATION PLAN FOR 2016-2019 (2016/17, 2017/18 & 2018/19) Version 2.0 January 2018 Page 2 of 195 Table of Contents 1. Introduction…………..……………………………………………………………...........................................................4 2. Summary on national priorities and expected benefits.....................................................................6 2.1. Economic priorities.......................................................................................................................6 2.2. Non‐economic priorities ……….…………………………………………………………………………………………………..11 2.3. Government policy priorities .......................................................................................................12 2.4 Stakeholders requests..........................................................................................................................................13 2.5. Selected Sectors of standardization and expected benefits ……...................................................14 3. Needed human and financial resources and work items implementation plan...........................................20 3.1 Human resources by type of work item and category….............................................................. .20 3.1.1 Human resources needed over the three‐year period by section..........................................23 3.2 Financial resources needed over the three‐year period by section...........................................24 3.3 Priority standardization work items implementation matrix over the
    [Show full text]