DOCSLIB.ORG

Line Matrix Printers PCL -II/Lineprinter Plus Programmer's

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Line Matrix Printers PCL -II/Lineprinter Plus Programmer's Line Matrix Printers PCL®-II/LinePrinter Plus® Programmer’s Reference Manual Line Matrix Printers PCL®-II/LinePrinter Plus® Programmer’s Reference Manual Printronix, Inc. makes no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Printronix, Inc. shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material. The information in this manual is subject to change without notice. This document contains proprietary information protected by copyright. No part of this document may be reproduced, copied, translated or incorporated in any other material in any form or by any means, whether manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix, Inc. COPYRIGHT 2001, 2012, PRINTRONIX, INC. All rights reserved. Trademark Acknowledgements IBM and Proprinter are registered trademarks, and PC-DOS is a trademark of International Business Machines Corporation. Centronics is a registered trademark of Genicom Corporation. ENERGY STAR is a registered trademark of the United States Environmental Protection Agency. As an ENERGY STAR® Partner, Printronix has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Epson is a registered trademark of Seiko Epson Corporation. Hewlett-Packard, HP and PCL are registered trademarks, and LineJet is a trademark of Hewlett-Packard Company. IGP, PGL, LinePrinter Plus, and Printronix are registered trademarks of Printronix, Inc. Magnum and QMS are registered trademarks, and Code V is a trademark of Quality Micro Systems, Inc. Microsoft, MS, Windows and MS-DOS are registered trademarks of Microsoft Corporation. PKUNZIP is a registered trademark of PKWARE, Inc. Postnet is a registered trademark of the United States Postal Service. This product uses Intellifont Scalable typefaces and Intellifont technology. Intellifont is a registered trademark of Agfa Division, Miles Incorporated (Agfa). CG, Garth Graphic, Intellifont, and Type Director are registered trademarks, and Shannon and CG Triumvirate are trademarks of Agfa Division, Miles Incorporated (Agfa). CG Bodoni, CG Century Schoolbook, CG Goudy Old Style, CG Melliza, Microstyle, CG Omega, and CG Palacio are products of Agfa Corporation. CG Times, based on Times New Roman under license from The Monotype Corporation Plc is a product of Agfa. Univers is a registered trademark of Linotype AG and/or its subsidiaries. Letraset is a registered trademark, and Aachen, Revue and University Roman are trademarks of Esselte Pendaflex Corporation. Futura is a registered trademark of Fundición Tipográfica Neufville, S.A. ITC Avant Garde Gothic, ITC Benguiat, ITC Bookman, ITC Century, ITC Cheltenham, ITC Clearface, ITC Galliard, ITC Korinna, ITC Lubalin Graph, ITC Souvenir, ITC Tiepolo, ITC Zapf Chancery, and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation. Albertus, Gill Sans, and Times New Roman are registered trademarks, and Monotype Baskerville is a trademark of The Monotype Corporation Plc, registered in the U.S. Pat. and TM office and elsewhere. Hiroshige and Marigold are trademarks of AlphaOmega Typography, Inc. Table of Contents 1 Introduction......................................................... 17 About this Guide .................................................................................. 17 Warnings and Special Information ................................................ 17 Related Product Information ......................................................... 18 Software Features ............................................................................... 19 PCL-II ............................................................................................ 19 P-Series ........................................................................................ 19 Proprinter III XL ............................................................................. 20 Epson FX-1050 ............................................................................. 20 2 HP PCL-II ........................................................... 21 Introduction .......................................................................................... 21 HP PCL-II Emulation Default Settings........................................... 22 Switching between the Emulations................................................ 23 Configuring the PCL-II Emulation with Control Codes......................... 23 Printer Feature Set Compatibility .................................................. 23 General Information ...................................................................... 24 Escape Sequences ....................................................................... 25 Bar Codes ..................................................................................... 28 US Postnet Barcodes.................................................................... 38 Character Density Selection.......................................................... 42 Character Font Selection .............................................................. 45 Character Overstrike ..................................................................... 47 Character Style Selection.............................................................. 47 Cursor Positioning......................................................................... 49 Display Functions Mode................................................................ 49 Horizontal Margin Selection .......................................................... 50 Line Spacing ................................................................................. 50 Logical Page Length Selection...................................................... 51 Perforation Skip Mode................................................................... 52 Print Mode Selection ..................................................................... 52 Print Pitch Selection ...................................................................... 53 Printing in the Hex 80 through Hex FF Region.............................. 53 PTX Linefeed ................................................................................ 53 Programmable Reset .................................................................... 54 Programmable VFC....................................................................... 55 Table of Contents Raster Graphics ............................................................................ 63 Self-test ......................................................................................... 65 Standard (Computed) VFC ........................................................... 65 Stroke Weight (Bold) ..................................................................... 65 Switching Character Fonts ............................................................ 65 Text Length (Vertical Margin) Selection ........................................ 66 Transparent Print Data.................................................................. 66 Underline Mode............................................................................. 66 Vertical Forms Control (VFC)........................................................ 67 HP e3000 Information.......................................................................... 68 Feature Access and Transparent Modes ...................................... 68 VFC Download with a Serial Interface .......................................... 68 Carriage-Control Directives........................................................... 69 Graphics........................................................................................ 69 Printing in the Perforation Skip Region ......................................... 69 HP 1000 Information............................................................................ 70 Downloading VFC ......................................................................... 70 Perforation Skip Mode................................................................... 70 3 P-Series Printer Emulation ................................. 71 Overview.............................................................................................. 71 P-Series Default Values and States.............................................. 72 Configuring the P-Series Emulation with Control Codes ..................... 74 Format for Control Code Descriptions........................................... 74 Switching Between the Emulations ............................................... 74 Special Function Control Code (SFCC) Header ........................... 75 SFCC Command Line ................................................................... 75 Attribute Set and Reset Codes...................................................... 76 NUL Code ..................................................................................... 76 Print Modes Supported for Character Sets ................................... 76 The Control Codes ........................................................................ 77 Backspace..................................................................................... 79 Bell ................................................................................................ 79 Bold Print......................................................................................
Load more

Recommended publications
  • Vinculum-II Scrolling Text Application Using LED Dot Matrix Display
    Application Note AN_200 Vinculum-II Scrolling Text Application Using LED dot matrix display Version 1.0 Issue Date: 2012-02-09 This application note provides an example of using the FTDI Vinculum-II (VNC2) to communicate with a USB Flash drive to display text and graphics held on the Flash drive, on a LED dot matrix display. Drivers and source code are also provided (downloadable from the FTDI website) Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. Future Technology Devices International Limited (FTDI) Unit 1, 2 Seaward Place, Glasgow G41 1HH, United Kingdom Tel.: +44 (0) 141 429 2777 Fax: + 44 (0) 141 429 2758 Web Site: http://ftdichip.com Copyright © 2012 Future Technology Devices International Limited Application Note AN_200 Vinculum-II Scrolling Text Application Using LED dot matrix display Version 1.0 Document Reference No.: FT_000571 Clearance No.: FTDI# 277 Table of Contents 1 Introduction .................................................................................................................................... 3 1.1 Overview ................................................................................................................................. 3 1.2 Hardware Requirements ......................................................................................................... 4 2 Operation .......................................................................................................................................
    [Show full text]
  • LPR and LP Technical Brief
    LPR and LP Technical Brief Overview Why Use LPR? LPR is one of several methods available for sending files to The lpr and lp commands provide an easy way to send files the Codonics NP-1600 printer. LPR utilizes the TCP/IP net- to the various Logical Devices that exist on the printer. It is working protocol and is most commonly used in UNIX, and the preferred way of sending files over a TCP/IP network to a lesser extent, in MS-DOS/Windows and other environ- since the printer has internal queuing and spooling for all of ments. Most LPR implementations have easy-to-use com- the internal print queues. Each of the internal printer Logical mands for sending files to the printer, but require set up by Devices may be set up on remote systems to allow for print- the System Administrator for correct operation. ing of Scaled, Unscaled, and Bracketing images. The lpr command and the UNIX System V lp command, are used to send image files to the printer. They are easier to use Multiple images can also be assembled on one page by using than FTP and require no user interaction so they may be the Caption, Variable Multiformatting, and Fixed Multifor- used from applications and shell commands. Not all System matting Devices. Getting the desired output can be accom- V LP implementations support the LPR transfer protocol plished very easily by following two general rules: which is used by the printer. Consult your documentation. If you wish to print a single image on a page, you should: The internal operating system on the printer acts as a remote LPD host, allowing various printer formatting functions to 1.
    [Show full text]
  • Laser Printer - Wikipedia, the Free Encyclopedia
    Laser printer - Wikipedia, the free encyclopedia http://en. rvi kipedia.org/r,vi ki/Laser_pri nter Laser printer From Wikipedia, the free encyclopedia A laser printer is a common type of computer printer that rapidly produces high quality text and graphics on plain paper. As with digital photocopiers and multifunction printers (MFPs), Iaser printers employ a xerographic printing process but differ from analog photocopiers in that the image is produced by the direct scanning of a laser beam across the printer's photoreceptor. Overview A laser beam projects an image of the page to be printed onto an electrically charged rotating drum coated with selenium. Photoconductivity removes charge from the areas exposed to light. Dry ink (toner) particles are then electrostatically picked up by the drum's charged areas. The drum then prints the image onto paper by direct contact and heat, which fuses the ink to the paper. HP I-aserJet 4200 series printer Laser printers have many significant advantages over other types of printers. Unlike impact printers, laser printer speed can vary widely, and depends on many factors, including the graphic intensity of the job being processed. The fastest models can print over 200 monochrome pages per minute (12,000 pages per hour). The fastest color laser printers can print over 100 pages per minute (6000 pages per hour). Very high-speed laser printers are used for mass mailings of personalized documents, such as credit card or utility bills, and are competing with lithography in some commercial applications. The cost of this technology depends on a combination of factors, including the cost of paper, toner, and infrequent HP LaserJet printer drum replacement, as well as the replacement of other 1200 consumables such as the fuser assembly and transfer assembly.
    [Show full text]
  • A Comparative Study of Different Printed Documents to Estimate the Type of Printer Used
    Journal of Forensic Research and Crime Studies Research Open Access A Comparative Study of Different Printed Documents to Estimate the Type of Printer Used Noronha SJ1, Basheer SZ1, Vijay MN1, Alnajjar A2, Sharma BK3,* and Singh N3 1Department of Forensic Science, Amity University Dubai, Dubai International Academic City, Dubai, UAE 2Former Head of Questioned Documents Unit, Department of Forensic Science and Criminology, Dubai Police, UAE 3Assistant Professor, Department of Forensic Science, Amity University Dubai, Dubai International Academic City, Dubai, UAE *Corresponding author: Sharma BK, Assistant Professor, Department of Forensic Science, Amity University Dubai, Dubai International Academic City, Dubai, UAE, Tel: 9714 4554 900; Fax: 9714 4356 810; E-mail: bsharma@amit- yuniversity.ae Received Date: March 28, 2017 Accepted Date: April 26, 2017 Published Date: April 28, 2017 Citation: Noronha SJ (2017) A Comparative Study of Different Printed Documents to Estimate the Type of Printer Used. J Forensic Res Crime Stud 1: 1-7. Abstract Printer examination in questioned document examination has become a necessity in the present time due to the progressive use of printers in the creation of documents as compared to that of handwritten documents and also the counterfeiting of documents printed by different printers. The present study is based upon the examination and analysis of different types of printed documents from various types of printers to distinguish and identify them for the purpose of forensic examination and to aid the questioned document ex- aminer during the forensic analysis of cases involving such printed documents. Each printer has a unique fashion of printing documents and the aim of this research is to identify this fashion by examining the printed documents.
    [Show full text]
  • 2. Input & Output Devices
    2. Input & Output Devices Malcolm Howe [Company name] 5/17/2020 Table of Contents Table of Figures ........................................................................................ Error! Bookmark not defined. Input and Output Devices - Syllabus ....................................................................................................... 3 Input - Keyboards ................................................................................................................................ 4 Alphanumeric Keyboard ................................................................................................................. 4 Numeric Keypad .............................................................................................................................. 4 PIN Pad ............................................................................................................................................ 4 Input - Pointing Devices ...................................................................................................................... 5 Mouse ............................................................................................................................................. 5 Touchpad / Trackpad ...................................................................................................................... 5 Trackball / Tracker Ball .................................................................................................................... 5 Touch Screen ..................................................................................................................................
    [Show full text]
  • Postscript Language Reference, Third Edition
    PostScript® LANGUAGE REFERENCE third edition Adobe Systems Incorporated Addison-Wesley Publishing Company Reading, Massachusetts • Menlo Park, California • New York • Don Mills, Ontario Harlow, England • Amsterdam • Bonn • Sydney • Singapore • Tokyo Madrid • San Juan • Paris • Seoul • Milan • Mexico City • Taipei Library of Congress Cataloging-in-Publication Data PostScript language reference manual / Adobe Systems Incorporated. — 3rd ed. p. cm. Includes bibliographical references and index. ISBN 0-201-37922-8 1. PostScript (Computer program language) I. Adobe Systems. QA76.73.P67 P67 1999 005.13'3—dc21 98-55489 CIP © 1985–1999 Adobe Systems Incorporated. All rights reserved. NOTICE: All information contained herein is the property of Adobe Systems Incorporated. No part of this publication (whether in hardcopy or electronic form) may be reproduced or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of the publisher. PostScript is a registered trademark of Adobe Systems Incorporated. All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless otherwise stated. The name PostScript also is used as a prod- uct trademark for Adobe Systems’ implementation of the PostScript language interpreter. Except as otherwise stated, any mention of a “PostScript printer,” “PostScript software,” or similar item refers to a product that contains PostScript technology created or licensed by Adobe Systems Incorporated, not to one that purports to be merely compatible. Adobe, Adobe Illustrator, Adobe Type Manager, Chameleon, Display PostScript, Frame- Maker, Minion, Myriad, Photoshop, PostScript, PostScript 3, and the PostScript logo are trademarks of Adobe Systems Incorporated.
    [Show full text]
  • Unit 5 OUTPUT
    Unit 5 OUTPUT 1.1. Read and translate the following words and word- combinations. an information-processing application, an output device, capabilities and limitations, graphic animation, strike a ribbon, hard-copy devices, a column of steel pins, multicoloured ribbons, produce text in several colours, draft-quality text, a pen carriage, subtractive primary colours, a quiet opera- tion, mathematical descriptions, a sharper image. 1.2. Learn key words and word-combinations. bitmap – бітове зображення символу bold (adj) – жирний bubble-jet printer – пристрій струменевого друку cyan (adj) – голубувато-зелений dot-matrix printer – матричний принтер draft quality – чернетковий emit (v) – випромінювати; випускати hard copy – роздрук hue (n) – відтінок impact (adj) – контактний ink cartridge – касета з чорнилом inkjet printer – пристрій струменевого друку italic (adj) – курсивний LED printer – електрографічний друкарський пристрій зі світлодіо- дами line printer – пристрій друку рядками magenta (adj) – червоний near-letter quality – середня якість друку nonimpact (adj) – безконтактний nozzle (n) – сопло Unit 15 99 outline (n) – схема, план page printer – пристрій друку сторінками page-description language – мова опису сторінок pin (n) – контактний штир plotter (n) – графобудівник polygon (n) – багатокутник print head – друкувальна головка printer (n) – друкарський пристрій, принтер scaling – масштабування soft copy – зображення на екрані дисплея underline (v) – підкреслювати 1.1. Read and translate the text. Printers Although the information-processing application itself determines what the content of the output will be, the format of the output depends, in part, on the output device. For example, in the case of generating a simple report, the choices include • Printing or video display. • Text and/or graphics. • Black and white or colour. Which type of output to use is a decision that depends on the desired use of the information, the cost of producing that information, and whether the required technology is available.
    [Show full text]
  • FORENSIC SCIENCE PAPER No.8: Questioned Document MODULE No
    SUBJECT FORENSIC SCIENCE Paper No. and Title PAPER No. 8: Questioned Document Module No. and Title MODULE No. 29: Scanned Documents and Facsimile Machine Module Tag FSC_P8_M29 FORENSIC SCIENCE PAPER No.8: Questioned Document MODULE No. 29: Scanned Documents & Facsimile Machines TABLE OF CONTENTS 1. Learning Outcomes 2. Introduction 3. Computer- Generated Documents and the Forensic Examiner 4. Examination Procedure 5. Description and Histories of the Technologies 6. Identification Features of the Printing Processes 7. Summary FORENSIC SCIENCE PAPER No.8: Questioned Document MODULE No. 29: Scanned Documents & Facsimile Machines 1. Learning Outcomes After studying this module, you shall be able to- Know about various Technology of Printers Learn about the history of various Technology Identify the printer technology with the help of identifying features 2. Introduction One of the most extraordinary skills that we as human beings possess is written communication. Unlike a conversation, our written words allow us to transmit ideas not only over distance, but also over time. It would seem that the urge to make a record of our lives is as old as man himself. Even before there was writing, ochre and charcoal drawings in caves show our ancestors recording important daily events, such as a particularly successful bison hunt — creating, perhaps, the earliest form of textbook or, then again, maybe just bragging rights. Our progression from pictographs to graphical user interface has taken place over a remarkably short time. At no time in man’s history, however, have the documents we make and print gone through more dramatic technological changes than in the past 30 years.
    [Show full text]
  • 50 ELECTRONIC DICE USING DOT MATRIX DISPLAY.Pdf
    [Kapoor*, 5(5): May, 2016] ISSN: 2277-9655 Impact Factor: 3.785 IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY ELECTRONIC DICE USING DOT MATRIX DISPLAY Disha Kapoor*, Rohit Pandey, Rishav Vaid, M.V. Patil * Electronics, Bharati Vidyapeeth University College Of Engineering, Pune, India DOI: 10.5281/zenodo.51429 ABSTRACT This paper includes a micro controller based digital dice game using an electronic digital dice with the help of dot matrix display. The game designed is a two player one in which each of the player gets his turn to play with the dice and the player who reaches the target score fastest is declared to be the winner. Both the players have one push button each which when pressed freezes the count on the digital dice and highlights it on the display. The score of both the players and the status of who leads till that turn Is displayed on the dot matrix display. We show how dot matrix may be more or less dependable, and suggest some improvements to standard designs. The paper includes many recommendations for developers and purchasers. KEYWORDS: Dot matrix display, Light emitting diodes, serial interface, electronic dice. INTRODUCTION A dot matrix is a 2-dimensional patterned array, used to represent characters, symbols and image. Every type of modern technology uses dot matrices for display of information, including cell phones, televisions, and printers. They are used in textiles with sewing, knitting and weaving. A seven segment display is a form of electronic display device for displaying decimal numerals that is an alternative to the complex dot matrix displays.
    [Show full text]
  • UNIT V STORAGE and DISPLAY INSTRUMENTS Cathode Ray
    UNIT V STORAGE AND DISPLAY INSTRUMENTS Cathode Ray Oscilloscope The cathode Ray Oscilloscope or mostly called as CRO is an electronic device used for giving the visual indication of a signal waveform. It is an extremely useful and the most versatile instrument in the electronic industry. CRO is widely used for trouble shooting radio and television receivers as well as for laboratory research and design. Using a CRO, the wave shapes of alternating currents and voltages can be studied. It can also be used for measuring voltage, current, power, frequency and phase shift. Different types of oscilloscopes are available for various purposes. Block Diagram of CRO (Cathode Ray Oscilloscope) The figure below shows the block diagram of a general purpose CRO. As we can see from the above figure above, a CRO employs a cathode ray tube (CRT), which acts as the heart of the oscilloscope. In an oscilloscope, the CRT generates the electron beam which are accelerated to a high velocity and brought to focus on a fluorescent screen. This screen produces a visible spot where the electron beam strikes it. By deflecting the beam over the screen in response to the electrical signal, the electrons can be made to act as an electrical pencil of light which produces a spot of light wherever it strikes. For accomplishing these tasks various electrical signals and voltages are needed, which are provided by the power supply circuit of the oscilloscope. Low voltage supply is required for the heater of the electron gun to generate the electron beam and high voltage is required for the cathode ray tube to accelerate the beam.
    [Show full text]
  • Line Matrix Printer Laser Printer  Daisy Wheel Printer Xerography  IBM Electromatic Table Inkjet Printer Printing Machine
    Dot Matrix Printer Image Writer Impact Line Matrix Printers Printer Daisay Wheel Printer IBM Electromatic PRINTERS Compact Photo HP Deskjet Non-Impact Laser Printer Printers Xerography Inkjet Printer Printers Impact Printers Non-Impact Printers Dot Matrix Printer Compact Photo Image Writer HP Deskjet Line Matrix Printer Laser Printer Daisy Wheel Printer Xerography IBM Electromatic Table Inkjet Printer printing Machine Printer In computing, a printer is a peripheral which produces a text and/or graphics of documents stored in electronic form, usually on physical print media such as paper or transparencies. Many printers are primarily used as local peripherals, and are attached by a printer cable or, in most newer printers, a USB cable to a computer which serves as a document source. Some printers, commonly known as network printers, have built-in network interfaces, typically wireless and/or Ethernet based, and can serve as a hard copy device for any user on the network. Individual printers are often designed to support both local and network connected users at the same time. In addition, a few modern printers can directly interface to electronic media such as memory cards, or to image capture devices such as digital cameras, scanners; some printers are combined with a scanners and/or fax machines in a single unit, and can function as photocopiers. Printers that include non-printing features are sometimes called multifunction printers (MFP), multi-function devices (MFD), or all-in-one (AIO) printers. Most MFPs includeprinting, scanning, and copying among their many features. Consumer and some commercial printers are designed for low-volume, short-turnaround print jobs; requiring virtually no setup time to achieve a hard copy of a given document.
    [Show full text]
  • Cathode Ray Tube(CRT)
    Cathode Ray Tube(CRT) ELECTRON GUN ASSEMBLY: • It is used for producing a strain of electrons. • The electron gun assembly consists of an indirectly heated cathode, A control grid surrounding the cathode, a Focusing anode and an accelerating anode. • The solo function of it is to provide a focused electron beam which is accelerated towards the phosphorus screen. • The rate of emission of electrons or say intensity depends on magnitude of Cathode current which is controlled by the control grid. DEFLECTION PLATE ASSEMBLY : • The electron beam passes through the two pairs of deflection plates. • One pair of deflection plate is mounted vertically and deflects the beam horizontal and called horizontal deflection plate. • other pair mounted horizontally deflects beam in vertical direction and therefore is called vertical deflection plate. • The electron beam will be deflected to left or right of the tube axis according to the conditions that whether the plates are charged. SCREEN FOR CRT : • The end wall of CRT ,called the screen of CRT is coated with phosphor. • When electron beam strikes the CRT screen, a spot of light is produced on the screen. • The phosphor absorbs the kinetic energy of the bombarding electrons and emits energy at a lower frequency in a visual spectrum. • Among the fluorescent materials used are zinc silicate, calcium tungstate and zinc sulphide. • The intensity of light emitted from screen of CRT is called luminance. GLASS BODY AND BASE : • The whole assembly is protected in a conical highly evacuated glass housing through suitable support’s. • The inner walls of CRT between necks and screen are usually coated with a conducting material known as aquadag and this coating is electrically connected to the accelerating anode.
    [Show full text]