Basic Scout Knots

Total Page:16

File Type:pdf, Size:1020Kb

Basic Scout Knots Step-By-Step: Basic Scout Knots Overhand Knot Square Knot (or Reef not, the classic joining knot.) Right over left… Left over right… makes a knot tidy… and tight. Granny Knot (The Granny knot is very UNSAFE. This is why your shoelaces come untied!) Right over left… Right over left… makes a knot ugly and WRONG. Bowline (The rescue knot.) Make a loop (top to you). The rabbit goes out of the hole… around the tree… and back into the hole. Sheet Bend (Stronger than a Square Knot, especially good for joining different size lines..) Make a loop in one end. The rabbit goes out of the hole… around the tree back under his path. Slip Knot (Warning: This is a type of noose! This is a quick cinch knot.) Make a loop. Pull a loop up through the loop. Pull tight. Step-By-Step: Basic Scout Knots Page 2 Half Hitch Two Half Hitches (Taught-Line is much stronger.) Loop over the top (Half Hitch) Second Half Hitch on the outside. Pull tight. Taut-Line Hitch (Perfect for tying down your truck lid or a tent guy line.) Loop over the top (Half Hitch) Loop over the top again. One last loop outside. Pull tight. Clove Hitch (For tying a rope to a tree or pole.) Loop over the top. Loop around again below. Pull through the hole. Figure-Eight (This classic “stopper knot keeps knots in place.) Loop over the top Loop under Go through the hole Pull tight.
Recommended publications
  • Students Will Learn About Different Types of Knots and Their Uses in an Outdoor Setting. Students Will Practice Creating Each Knot and Master at Least One
    Knots Students will learn about different types of knots and their uses in an outdoor setting. Students will practice creating each knot and master at least one. Students will make a paracord bracelet. Materials Included in the Kit: Not Included in the Kit: • 7ft length of paracord • Scissors • Side button buckle • ADULT SUPERVISION - Lighter Lesson Knots are bumps in a rope. These bumps can be made in all different shapes and sizes BUT, they also can be used for a lot of different things! Can you think of activities that we do that we need knots? We use them almost every day putting on shoes for sure. Survivalists and naturalists also use knots when camping, boating, and fishing. Doctors use even use them in surgeries! Each type of knot has its own special job and today we are going to learn about four knots and practice them. Activity 1: tying four basic knots You can follow step by step through each knot following the instructions on the last pages of the lesson 1) Let us start with one of the most simple knots out there - an OVERHAND KNOT. It will look familiar to you, what do you use this one for…tying your shoes? 2) A SLIP KNOT forms an adjustable loop or noose at the end or middle of a rope. You can place the loop around a support and then tighten the knot by sliding it. This makes it simple attaching a line to a bar or post. 3) If you want to tie your fishing line securely to a hook, swivel or lure, the IMPROVED CLINCH KNOT would be your best bet.
    [Show full text]
  • Complete Rope Splicing Guide (PDF)
    NEW ENGLAND ROPES SPLICING GUIDE NEW ENGLAND ROPES SPLICING GUIDE TABLE OF CONTENTS General - Splicing Fid Lengths 3 Single Braid Eye Splice (Bury) 4 Single Braid Eye Splice (Lock Stitch) 5 Single Braid Eye Splice (Tuck) 6 Double Braid Eye Splice 8 Core-to-Core Eye Splice 11 Sta-Set X/PCR Eye Splice 13 Tachyon Splice 15 Braided Safety Blue & Hivee Eye Splice 19 Tapering the Cover on High-Tech Ropes 21 Mega Plait to Chain Eye Splice 22 Three Strand Rope to Chain Splice 24 Eye Splice (Standard and Tapered) 26 FULL FID LENGTH SHORT FID SECTION LONG FID SECTION 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 2 NEW ENGLAND ROPES SPLICING GUIDE GENERAL-SPLICING TIPS TOOLS REQUIRED 1. Before starting, it is a good idea to read through the directions so you . Masking Tape . Sharp Knife understand the general concepts and principles of the splice. Felt Tip Marker . Measuring Tape 2. A “Fid” length equals 21 times the diameter of the rope (Ref Fid Chart). Splicing Fids 3. A “Pic” is the V-shaped strand pairs you see as you look down the rope. WHIPPING ROPE HANDLING Seize by whipping or stitching the splice to prevent the crossover from Broom pulling out under the unbalanced load. To cross-stitch, mark off six to Handle eight rope diameters from throat in one rope diameter increments (stitch length). Using same material as cover braid if available, or waxed whip- ping thread, start at bottom leaving at least eight inches of tail exposed for knotting and work toward the eye where you then cross-stitch working Pull rope from back toward starting point.
    [Show full text]
  • Knot Masters Troop 90
    Knot Masters Troop 90 1. Every Scout and Scouter joining Knot Masters will be given a test by a Knot Master and will be assigned the appropriate starting rank and rope. Ropes shall be worn on the left side of scout belt secured with an appropriate Knot Master knot. 2. When a Scout or Scouter proves he is ready for advancement by tying all the knots of the next rank as witnessed by a Scout or Scouter of that rank or higher, he shall trade in his old rope for a rope of the color of the next rank. KNOTTER (White Rope) 1. Overhand Knot Perhaps the most basic knot, useful as an end knot, the beginning of many knots, multiple knots make grips along a lifeline. It can be difficult to untie when wet. 2. Loop Knot The loop knot is simply the overhand knot tied on a bight. It has many uses, including isolation of an unreliable portion of rope. 3. Square Knot The square or reef knot is the most common knot for joining two ropes. It is easily tied and untied, and is secure and reliable except when joining ropes of different sizes. 4. Two Half Hitches Two half hitches are often used to join a rope end to a post, spar or ring. 5. Clove Hitch The clove hitch is a simple, convenient and secure method of fastening ropes to an object. 6. Taut-Line Hitch Used by Scouts for adjustable tent guy lines, the taut line hitch can be employed to attach a second rope, reinforcing a failing one 7.
    [Show full text]
  • Tying the THIEF KNOT
    Texas 4-H Natural Resources Program Knot Tying: Tying the THIEF KNOT The Thief Knot is one of the most interesting knots to teach people about. The Thief Knot is said to have been tied by Sailor’s who wanted a way to see if their Sea Bag was being tampered with. The crafty Sailor would tie the Thief Knot, which closely resembles the Square Knot, counting on a careless thief. The Thief Knot is tied much like the Square Knot, but the ends of the knot are at opposite ends. The careless thief, upon seeing what knot was tied in the Sailor’s sea bag, would tie the bag back with a regular Square Knot alerting the Sailor his bag had been rummaged through. The Thief Knot, while more of a novelty knot, does have its purpose if you’re trying to fool thieves… I guess it’s safe to say it was the original tamper evident tape. Much like the Square Knot, the Thief Knot should NOT be relied upon during a critical situation where lives are at risk! Also, the Thief Knot is even more insecure than the Square Knot and will also slip if not under tension or when tied with Nylon rope. Uses: The Thief Knot is not typically tied by mistake, unlike the Square Knot which can yield a Granny Knot. Indication of tampering Some similar Square Knot uses (Remember this is more insecure!) Impressing your friends at parties Instructions: Hold the two ends of the rope in opposite hands Form a bight (curved section of rope) with your left hand where the end points towards the top of the loop Pass the right end in and around the back of the bight Continue threading the right end back over the bight and back through it The right end should now be parallel with its starting point Grasp both ends of the right and left sides and pull to tighten Check the knot to ensure that you have the working ends of the knot pointing in opposite directions Texas 4-H Youth Development Program 4180 State Highway 6 College Station, Texas, 77845 Tel.
    [Show full text]
  • Tubular Sculptures
    Tubular Sculptures Carlo H. Séquin CS Division, University of California, Berkeley, CA E-mail: [email protected] Abstract This paper reviews ways in which many artists have constructed large sculptures from tubular elements, ranging from single cylinders to toroidal or knotted structures, to assemblies of a large number of bent tubes. A few parameterized generators are introduced that facilitate design and evaluation of a variety of such sculptural forms. 1. Introduction Artists like Charles O. Perry have been able to build very large scale sculptures filling volumes of more than 30 feet in diameter at an affordable price by assembling pre-cut and bent tubular pieces. Stellar examples are Eclipse in the Hyatt Regency lobby in San Francisco, or Equinox at the Lincoln Center, Dallas, Texas (Fig.1a). But even much smaller assemblies of tubular elements can make very attractive sculptures. At the small end of this spectrum we find sculptures by Max Bill, e.g., Assembly of three equal cylinders (Fig.1b) [2], or the elegant tubular loops by José de Rivera (Fig.1c) [4]. Additional “minimal sculptures” will be discussed in Section 3. Figure 1: (a) Charles O. Perry: “Equinox;” (b) Max Bill: “Assembly of 3 equal cylinder;” (c) José de Rivera: “Construction #35.” With so many diverse ways of forming attractive sculptures from tubular elements, it seems worthwhile to try to compile an organized overview over the many possibilities and approaches used, and to explore in which ways computer-aided tools may be helpful to create additional, and potentially more complex, artistic structures. In addition, I have a personal, nostalgic reason to write this paper on Tubular Sculptures.
    [Show full text]
  • Knots Splices and Rope Work
    The Project Gutenberg eBook, Knots, Splices and Rope Work, by A. Hyatt Verrill This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.net Title: Knots, Splices and Rope Work Author: A. Hyatt Verrill Release Date: September 21, 2004 [eBook #13510] Language: English Character set encoding: ISO-8859-1 ***START OF THE PROJECT GUTENBERG EBOOK KNOTS, SPLICES AND ROPE WORK*** E-text prepared by Paul Hollander, Ronald Holder, and the Project Gutenberg Online Distributed Proofreading Team Transcriber’s Corrected spellings Notes: ‘casualities’ to ‘casualties’ ‘Midshipmen’s hitch’ to ‘Midshipman’ s hitch’ Illustration for Timber Hitch is Fig. 38, not Fig. 32 There is no Fig. 134. KNOTS, SPLICES and ROPE WORK A PRACTICAL TREATISE Giving Complete and Simple Directions for Making All the Most Useful and Ornamental Knots in Common Use, with Chapters on Splicing, Pointing, Seizing, Serving, etc. Adapted for the Use of Travellers, Campers, Yachtsmen, Boy Scouts, and All Others Having to Use or Handle Ropes for Any Purpose. By A. HYATT VERRILL Editor Popular Science Dept., “American Boy Magazine.” SECOND REVISED EDITION Illustrated with 156 Original Cuts Showing How Each Knot, Tie or Splice is Formed and Its Appearance When Complete. CONTENTS INTRODUCTION CHAPTER I CORDAGE Kinds of Rope. Construction of Rope. Strength of Ropes. Weight of Ropes. Material Used in Making Ropes. CHAPTER II SIMPLE KNOTS AND BENDS Parts of Rope.
    [Show full text]
  • Marlin Spike Hitch: + + Marlin Spike Hitch
    © 1999, Gerald L. Findley 73 MARLIN SPIKE HITCH: + + MARLIN SPIKE HITCH overhand loop 1. standing part bight 2. Description —— A loop formed by a half hitch around a bight in the standing part of the rope. Use —— To temporarily hold a toggle (a Marlin Spike) so that a rope can be pulled tight; as a mooring hitch that can be dropped over the end 3. of a stake or pole; to hold the rungs of a rope ladder. Comments —— A secure temporary hitch that can be easily spilled by removing the toggle. The Marlin Spike Hitch gets it name from the prac- tice of using it around a Marlin Spike or simi- lar tool to tighten knots and servicing, Other Names —— Slip Noose; especially when the half hitch is pulled closed around the bight. 4. Narrative ---- (For marlin spike knotboard) (1) Form an overhand loop. (2) Then form a bight in the standing part. (3) Place the bight under the overhand loop. (4) Then reeve the bight through the underhand loop. (5) Pass a toggle through the eye of the bight (6) and pull tight. ---------------------------------------- 74 © 1999, Gerald L. Findley ---------------------------------------- SLIP NOOSE: 5. toggle Description ----- An overhand knot tied around its standing part. Use ---- As a sliding loop for a snare; as a toggled stopper knot. Comments ---- Related to the overhand knot. Of- ten confused with the slip knot. Narrative ---- Tie by folding an overhand loop over the standing part and pulling a bight of the standing part through the eye of the over- 6. hand loop. (See marlin spike hitch.) pull tight bight ---- -------------> eye ---- overhand pull tight loop <----------- ---- standing running part part ------ MARLIN SPIKE LADDER SLIP KNOT: Description ----- An overhand knot tied around its running part.
    [Show full text]
  • Chapter 6 Chapter
    Chapter 6 Chapter Basic Ropes & Knots 6 – Ropes & Knots 305 Seattle Fire Department ROPE Introduction In the Fire Service, the knowledge of how to tie and use knots is essential. While there are many knots available, the following knots described in this section should be adequate to meet the needs of Seattle firefighters in most situations Keep in mind that it is more important to be able to tie these standard knots automatically, while under the stress of an emergency, than to know a greater number of knots and yet have failed to acquire skill in their use. The ropes used on operation companies range in size from 1/4” woven cotton tie ropes to ½”” kernmantle nylon life safety rescue ropes. They can vary in length from just a few feet to 300 foot lengths. Ropes and knots are used daily in securing equipment, fire suppression, rescue work, and emergency medical applications. Whether working with rope or knots in an emergency or training, SAFETY should be on the mind of all involved. Rope Usage The Seattle Fire Department separates the use of ropes into two categories: Utility and Life Safety. Utility A utility rope is a rope that is used for any function other than that of life safety. Tie ropes, practice ropes, RIG ropes, roof ropes and other ropes that are marked as such all fall under the umbrella of utility rope. Life Safety Life Safety rope is defined as any rope used to support the weight of members or other persons during rescue, fire fighting, other emergency operations, or during training evolutions.
    [Show full text]
  • The Scrapboard Guide to Knots. Part One: a Bowline and Two Hitches
    http://www.angelfire.com/art/enchanter/scrapboardknots.pdf Version 2.2 The Scrapboard Guide to Knots. Apparently there are over 2,000 different knots recorded, which is obviously too many for most people to learn. What these pages will attempt to do is teach you seven major knots that should meet most of your needs. These knots are what I like to think of as “gateway knots” in that once you understand them you will also be familiar with a number of variations that will increase your options. Nine times out of ten you will find yourself using one of these knots or a variant. The best way to illustrate what I mean is to jump in and start learning some of these knots and their variations. Part One: A Bowline and Two Hitches. Round Turn and Two Half Hitches. A very simple and useful knot with a somewhat unwieldy name! The round turn with two half hitches can be used to attach a cord to post or another rope when the direction and frequency of strain is variable. The name describes exactly what it is. It can be tied when one end is under strain. If the running end passes under the turn when making the first half-hitch it becomes the Fisherman’s Bend (actually a hitch). The fisherman’s bend is used for applications such as attaching hawsers. It is a little stronger and more secure than the round turn and two half-hitches but harder to untie so do not use it unless the application really needs it.
    [Show full text]
  • EC700 the Use of Rope on the Farm
    THE UNIVERSITY OF NEBRASKA AGRICULTURAL COLLEGE EXTENSION SERVICE December, 1922 Extension Circular 700 THE USE OF ROPE ON THE FARM By VIRGIL OVERHOLT The Ohio State University Agricultural College Extension Service At some time, almost every one has had occasion to regret his lack of knowledge about tying knots. THE USE OF ROPE ON THE FARl\1 By VIRGIL OVERHOLT Ohio State Utt1iversity VERY farmer finds many occasions for using rope. Therefore, E time spent in learning to tie a few of the simple knots, to make some common hitches, that are reliable under strain but are easy to untie, or to make a strong splice yet small enough to pass thru a common pulley, will never be r egretted. More time is frequently wasted in trying to untie a knot •than would be r equired to learn how to tie it properly. If the hay rope breaks at a critical moment, the ability to splice it may mean the saving of much time and several dollars. The correct knot will enable the grain binder to change from one ball to an­ other without entangling and breaking the twine. Such delays are not only a loss of valuable time, but a source of great annoyance. Animllls have been strangled to death, because they were improperly tied and even human lives often have been endanger ed by ropes insecurely fastened. This bulletin is published for the instruction of farmers and students desiring to learn a few of the practical uses to which rope is put on the farm. It is 11ot a complete hand book on rope.
    [Show full text]
  • Knots Often Used by Fighter Kite Makers and Flyers
    rv 4 2007 Bruce Lambert [email protected] www.fighterkitecentral.com KNOTS OFTEN USED BY FIGHTER KITE MAKERS AND FLYERS There happens to be quite a few of us who don't know much about knots. We don't know how to tie them and don't know which knot to use in a particular situation or the name of the knot. This article is meant to help us learn a little about the knots that can help us in making and adjusting our fighter kites. I posted an email on the fighter kite Topica.com email list asking for contributions about what knots are used for tying bridles, tension lines, etc. Here's the result of the request along with some on-line research I did to provide more options. If you want to know about knots, search the internet for tons of more information. DENNIS ISCHE'S BOW TENSIONER SLIP KNOT This is a great knot to use for the tensioning line on the back of the leading edge of a buka and for putting a bend in a carbon fiber spine of a diamond fighter kite. To adjust this knot, you slide the knot along the line it is tied around. It locks and securely stays in its place when there's tension on the line. To move the knot you must release some of the tension. This functions similar to a tautline hitch. TAUTLINE HITCH The tautline hitch is used by many fighter kite makers as the adjusting knot in a tension line on the back of a buka or on the carbon fiber spine of a diamond shaped fighter kite.
    [Show full text]
  • Fun with Knots
    Knots 2’’ 0.5’’ 2.5’’ 2’’ Click on the button for the level you need: Brownies Juniors Cadettes Seniors and Ambassadors Darker Green: PMS 355 C94 M0 Y100 K0 Outdoor Skills Patch Knots – Brownies Learn the skills needed to thrive in an outdoor environment. Do you know how tie knots and what to use them for? Do you want to learn games you can play using knots? PLEASE NOTE: • Feel free to use the internet to look for videos and other diagrams of how to tie the knots in this section as it may be easier to understand than written text. • Try to space out each step between different troop meetings, different times during an overnight campout, etc. Doing them one right after another might cause the girls to become disinterested and less engaged. • The girls will remember less if you try to cram all of these into one troop meeting or lesson. Step 1: Learn overhand, square, and slip knots 1. Gather the girls up and explain “Today we are going to learn about different types of knots. What do you think we use knots for?” a. Knots can be used to tie things together, to stop rope from going through holes, to wrap rope around poles, etc. b. You use knots in activities like: sailing, climbing, caving, fishing, firefighting, truck driving and surgery. 2. “Awesome! Now, there are lots of different knots that exist and they all do different things. It’s important to learn how to tie different types of knots and what they are used for because if you use the wrong knot, it could be dangerous.” a.
    [Show full text]