MERITOR® BRAKE Lining KIT (MBLK) Quick Reference Chart

Total Page:16

File Type:pdf, Size:1020Kb

MERITOR® BRAKE Lining KIT (MBLK) Quick Reference Chart MERITOR® BRAKE LINING KIT (MBLK) QUICK REFERENCE CHART IDEAS DRIVING RESULTS COMPLETE PORTFOLIO. COMPREHENSIVE APPLICATION COVERAGE. QUICK REFERENCE GUIDE PREMIUM STANDARD INDUSTRY NO. APPLICATION GRADE GRADE 1245-C MBLK3100 MBLK8100 Ford, International Harvester 1252 MBLK3101 MBLK8101 Diamond Reo, Ford, International Harvester 1290 MBLK3102 MBLK8102 Ford 1307 MBLK3103 MBLK8103 Ford, International, Rockwell Axle 1308 MBLK3104 MBLK8104 Eaton Brakes, Ford, International, Mack, Rockwell Axle 1335 MBLK3159 Hino 1410 MBLK3145 MBLK8145 International, Mitsubishi Fuso, UD-Nissan 1410 O/S MBLK7016 International, Mitsubishi Fuso, UD-Nissan 1410 D/O/S MBLK7017 International, Mitsubishi Fuso, UD-Nissan 1416 MBLK3158 Isuzu 1418 MBLK3000 MBLK8000 Isuzu 1434 MBLK3143 MBLK8143 International, Mitsubishi Fuso, UD-Nissan 1434 O/S MBLK7020 International, Mitsubishi Fuso, UD-Nissan 1434 D/O/S MBLK7023 International, Mitsubishi Fuso, UD-Nissan 1455 MBLK3146 MBLK8146 Isuzu 1458 MBLK3147 MBLK8147 Isuzu 4462 MBLK3163 MBLK8163 Rockwell Axle 4470 MBLK3167 MBLK8167 Eaton Brakes, Rockwell Axle 4544 MBLK3110 MBLK8110 Dana, Standard Forge 4591 MBLK3113 MBLK8113 Dana, Eaton Brakes, Standard Forge 4602 MBLK3114 MBLK8114 Ford, International, Mack, Rockwell Axle 4605 MBLK3115 MBLK8115 Diamond Reo, Ford, International, Rockwell Axle 4607 MBLK3116 MBLK8116 Dana, Fruehauf, Standard Forge 4649 MBLK3118 MBLK8118 Fruehauf 4654 MBLK3119 Ford, Mack, Rockwell Axle 4662 MBLK3081 MBLK8081 Volvo 4663 MBLK3080 MBLK8080 Volvo 4664 MBLK3082 MBLK8082 Volvo 4670 MBLK3120 MBLK8120 Rockwell Axle 4674 MBLK3121 Eaton Brakes 4692 MBLK3122 MBLK8122 Dana, Standard Forge 4693 MBLK3123 Ford 4696 MBLK3190 MBLK8190 Volvo 4698 MBLK3083 MBLK8083 Volvo 4702 MBLK3124 MBLK8124 Meritor 4704 MBLK3125 Volvo 4705 MBLK3126 MBLK8126 Meritor 4706 MBLK3127 Rockwell 4707 MBLK3091 MBLK8091 International, Rockwell 4707 O/S MBLK7009 International, Rockwell 4709 MBLK3128 MBLK8128 Eaton Brakes 4710 MBLK3129 MBLK8129 Meritor 4711 MBLK3130 MBLK8130 Rockwell Each Meritor Brake Lining Kits consist of: LEGEND: Lining pieces enough to rivet 4 shoes (1 axle) and the corresponding amount of rivets O/S - Oversize D/O/S - Double Oversize QUICK REFERENCE GUIDE PREMIUM STANDARD INDUSTRY NO. APPLICATION GRADE GRADE 4715 MBLK3131 MBLK8131 Rockwell 4716 MBLK3132 Eaton 4719 MBLK3165 MBLK8165 Eaton 4720 MBLK3133 MBLK8133 Rockwell 4725 MBLK3134 MBLK8134 Eaton 4726 MBLK3135 Eaton 4736 MBLK3031 MBLK8031 Hino 4737 MBLK3030 MBLK8030 Hino 4223-A MBLK3105 MBLK8105 Eaton Brakes, Ford, International, White 4311-J MBLK3092 MBLK8092 Eaton Brakes, Ford, International 4317-G MBLK3093 MBLK8093 Diamond Reo, Eaton Brakes, White 4514-G MBLK3090 MBLK8090 International, Iveco, Rockwell Axle 4515-C MBLK3089 MBLK8089 Dana, Fiat, International 4515-E MBLK3164 MBLK8164 International, Mack, Rockwell Axle 4515-E O/S MBLK7008 International, Mack, Rockwell Axle 4524-B MBLK3107 MBLK8107 Fiat, International, Mercedes Benz, Rockwell Axle 4528-A MBLK3108 MBLK8108 Ford 4536-B MBLK3109 MBLK8109 Dana, Standard Forge 4549-C MBLK3173 MBLK8173 Mack, Rockwell Axle 4551-B MBLK3111 MBLK8111 Rockwell Axle 4561-B MBLK3112 Ford, Freightliner, Kenworth, Peterbilt, Rockwell Axle 4625-C MBLK3117 MBLK8117 Rockwell AF248 MBLK3042 Hino, Rockwell Axle AF282 MBLK3017 Mitsubishi Fuso AF283 MBLK3156 Isuzu, Mitsubishi Fuso AF284 MBLK3157 Mitsubishi Fuso AF285 MBLK3018 Hino AF286 MBLK3019 Hino AF287 MBLK3014 Hino AF288 MBLK3015 Hino AF289 MBLK3020 Hino, International, Mitsubishi Fuso, UD-Nissan. AF290 MBLK3021 Hino, International, Mitsubishi Fuso, UD-Nissan AF297 MBLK3043 Isuzu AF319 MBLK3151 UD-Nissan AF320 MBLK3152 UD-Nissan AF329 MBLK3155 Mitsubishi AF330 MBLK3148 Isuzu AF334 MBLK3166 Hino AF404 MBLK3016 Isuzu AF415 MBLK3144 Isuzu AF415 O/S MBLK7024 Isuzu AF415 D/O/S MBLK7026 Isuzu Each Meritor Brake Lining Kits consist of: LEGEND: Lining pieces enough to rivet 4 shoes (1 axle) and the corresponding amount of rivets O/S - Oversize D/O/S - Double Oversize QUICK REFERENCE GUIDE PREMIUM STANDARD INDUSTRY NO. APPLICATION GRADE GRADE AX/14/6 MBLK3092 MBLK8092 Eaton Truck, Eaton Brakes, Ford, International BC/100/101/1 MBLK3003 MBLK8003 BPW BC/35/1 MBLK3138 MBLK8138 BPW, Fruehauf, SAF/Sauer BC/36/1 MBLK3007 MBLK8007 BPW, DAF, Fruehauf, SAF BC/36/1 O/S MBLK7010 BPW, DAF, Fruehauf, SAF BC/37/1 MBLK3004 MBLK8004 BPW, DAF, Fruehauf, SAF BC/79/1 MBLK3137 BPW BC/80/1 MBLK3005 MBLK8005 BPW BC/81/1 MBLK3136 BPW BC/97/1 MBLK3094 MBLK8094 BPW, Fruehauf, Renault CB/31/1 F MBLK3149 UD-Nissan CB/31/1 R MBLK3150 UD-Nissan CW/11/1 MBLK3048 MBLK8048 Chevrolet, Mack, Rockwell Axle CW/12/1 MBLK3174 MBLK8174 DAF, Ford, Iveco, Leyland CW/3/1 MBLK3115 MBLK8115 Diamond Reo, Ford, International, Rockwell Axle CW/4/1 MBLK3114 MBLK8114 Ford, International, Mack, Rockwell Axle CW/4/1/2 MBLK3008 MBLK8008 Iveco, Volvo CW/4/2 MBLK3098 N/A DF/16/17/2 MBLK3049 MBLK8049 DAF DF/20/21/3 MBLK3050 MBLK8050 DAF, Sisu DF/32/33/1 MBLK3051 MBLK8051 Bova, DAF DF/34/35/1 MBLK3162 MBLK8162 DAF DF/36/37/1 MBLK3175 MBLK8175 DAF DF/44/45/1 MBLK3009 MBLK8009 DAF DF/46/47/1 MBLK3010 MBLK8010 DAF DF/48/49/1 MBLK3011 MBLK8011 Bova, DAF FH/100 F MBLK3145 MBLK8145 International, Mitsubishi Fuso, UD-Nissan FH/100 F O/S MBLK7016 International, Mitsubishi Fuso, UD-Nissan FH/100 F D/O/S MBLK7017 International, Mitsubishi Fuso, UD-Nissan FH/100 R MBLK3143 MBLK8143 International, Mitsubishi Fuso, UD-Nissan FH/100 R O/S MBLK7020 International, Mitsubishi Fuso, UD-Nissan FH/100 R D/O/S MBLK7023 International, Mitsubishi Fuso, UD-Nissan FT/6/7/1 MBLK3169 MBLK8169 Fruehauf FU/4/5/1 MBLK3111 MBLK8111 Dana, Eaton Brakes, Fruehauf, Rockwell Axle, Standard Forge GG/118 MBLK3176 MBLK8176 DAF, Dennis, ERF, Iveco, Renault GG/118/1 MBLK3177 MBLK8177 DAF, Dennis, ERF, Iveco, Renault GG/142/1 MBLK3055 MBLK8055 Bedford, DAF, Dennis, ERF, Renault GG/153 MBLK3178 MBLK8178 DAF, Ford, Leyland GG/217/1 MBLK3056 MBLK8056 MAN, Renault GG/218/1 MBLK3057 MBLK8057 MAN GG/83/1 MBLK3053 MBLK8053 Bedford, Fruehauf, DAF, Dennis, ERF GG/92/1 MBLK3054 MBLK8054 Bedford, Fruehauf, DAF, Dennis, ERF, Iveco, Nissan Each Meritor Brake Lining Kits consist of: LEGEND: Lining pieces enough to rivet 4 shoes (1 axle) and the corresponding amount of rivets O/S - Oversize D/O/S - Double Oversize QUICK REFERENCE GUIDE PREMIUM STANDARD INDUSTRY NO. APPLICATION GRADE GRADE IL/66/67/3 MBLK3089 MBLK8089 Dana, Fiat, International IL/68/69/1 MBLK3090 MBLK8090 Eaton Brakes, Rockwell Axle, Standard Forge IZ/28/1 MBLK3000 MBLK8000 Isuzu LE/59/1 MBLK3058 DAF LE/60/1/2 MBLK3059 MBLK8059 DAF, Leyland LE/64/1/2 MBLK3060 MBLK8060 DAF, Leyland LE/69/1 MBLK3061 MBLK8061 DAF MB/117/118/1 MBLK3062 MBLK8062 Mercedes Benz MB/51/1 MBLK3179 MBLK8179 Mercedes Benz MB/60/1 MBLK3180 MBLK8180 Mercedes Benz MB/74/75/1 MBLK3064 MBLK8064 Mercedes Benz MB/74/75/1 O/S MBLK7000 Mercedes Benz MB/74/75/1 D/O/S MBLK7001 Mercedes Benz MB/76/77/1 MBLK3065 MBLK8065 Mercedes Benz MB/76/77/1 O/S MBLK7004 Mercedes Benz MB/76/77/1 D/O/S MBLK7005 MBLK8182 Mercedes Benz MP/29/1 MBLK3183 MBLK8183 Mercedes Benz MP/30/1 MBLK3063 MBLK8063 Mercedes Benz MP/31/1 MBLK3096 MBLK8096 Mercedes Benz MP/31/2 MBLK3023 MBLK8023 MAN, Mercedes Benz, Renault MP/32/1 MBLK3097 MBLK8097 Mercedes Benz MP/32/2 MBLK3024 MBLK8024 MAN, Mercedes Benz, Renault MP/36/2 MBLK3025 MBLK8025 MAN, Mercedes Benz MP/37/38/1 MBLK3184 MBLK8184 Volkswagen NN/12 MBLK3158 Isuzu NN/40/1 MBLK3027 MBLK8027 Datsun NN/41/1 MBLK3028 MBLK8028 Datsun NN/52 MBLK3159 Hino NN/60/1 MBLK3030 MBLK8030 Hino NN/61/1 MBLK3031 MBLK8031 Hino PB/18/19/1 MBLK3187 MBLK8187 Kasbohrer PB/18/19/2 MBLK3188 MBLK8188 Kasbohrer RN/100/1 MBLK3066 MBLK8066 Renault RN/101/1 MBLK3099 MBLK8099 Renault RN/104/1 MBLK3067 MBLK8067 Renault RW/21/22/1 MBLK3069 MBLK8069 Meritor RW/9/13/2 MBLK3191 MBLK8191 Fruehauf, Meritor RW/9/13/3 MBLK3068 MBLK8068 Fruehauf, Meritor SJ/22/23/1 MBLK3032 MBLK8032 SAE (Dupillier), SAF/Sauer SJ/26/27/1 MBLK3033 MBLK8033 SAE (Dupillier), SAF/Sauer SJ/28/29/1 MBLK3070 MBLK8070 SAE, SAF/Sauer SJ/30/31/1 MBLK3071 MBLK8071 SAE (Dupillier), SAF/Sauer Each Meritor Brake Lining Kits consist of: LEGEND: Lining pieces enough to rivet 4 shoes (1 axle) and the corresponding amount of rivets O/S - Oversize D/O/S - Double Oversize QUICK REFERENCE GUIDE PREMIUM STANDARD INDUSTRY NO. APPLICATION GRADE GRADE SJ/34/35/1 MBLK3189 MBLK8189 SAF/Sauer SV/26/1 MBLK3035 MBLK8035 Scania SV/27/1 MBLK3036 MBLK8036 Scania SV/34/1 MBLK3041 MBLK8041 Scania SV/39/2 MBLK3037 MBLK8037 Scania SV/40/2 MBLK3038 MBLK8038 Scania SV/41/2 MBLK3039 MBLK8039 Scania SV/42/2 MBLK3040 MBLK8040 Scania SV/8/1 MBLK3034 MBLK8034 Scania TY/18 MBLK3160 MBLK8160 Toyota TY/19 MBLK3161 MBLK8161 Toyota VL/100/101/1 MBLK3029 MBLK8029 Volvo VL/70/71/1 MBLK3190 MBLK8190 Volvo VL/72/73/1 MBLK3080 MBLK8080 Volvo VL/74/75/1 MBLK3081 MBLK8081 Volvo VL/76/77/1 MBLK3082 MBLK8082 Volvo VL/81/82/1 MBLK3083 MBLK8083 Volvo VL/85/1 MBLK3084 MBLK8084 Volvo VL/86/1 MBLK3044 MBLK8085 Volvo VL/87/2 MBLK3045 MBLK8086 Volvo VL/88/2 MBLK3046 MBLK8087 Volvo VL/89/2 MBLK3088 MBLK8088 Volvo VV/307 MBLK3129 MBLK8129 Meritor YK/12/1 MBLK3192 MBLK8192 York YKB/1/2 MBLK3052 MBLK8052 York Each Meritor Brake Lining Kits consist of: LEGEND: Lining pieces enough to rivet 4 shoes (1 axle) and the corresponding amount of rivets O/S - Oversize D/O/S - Double Oversize MBLK “3 SERIES” PREMIUM GRADE BRAKE LINING KIT - includes MG2A Brake Linings Each MBLK “3 Series” Brake Lining Kit includes the neccessary components to complete 1 axle - MG2A Brake Linings and appropriate number of rivets for 4 brake shoes. MG2A RETARDATION FORCE MG2A BRAKE POWER (FADE) 0.51
Recommended publications
  • Brake Lining Application Guide Marathonbrake.Com
    ApplicationGuide_Layout 1 11/24/10 5:03 PM Page 1 The Marathon Advanta ge... Feel the Difference Brake Lining One of the most significant design characteristics of any heavy duty brake lining is its density. When higher quality and heavier Hi-Density Friction raw materials are used in a lining's formulation, it creates a higher ■ Higher density friction materials have the ability to hold Application mass in the block or stated another way, higher density. Truck more heat energy and therefore more efficiently brakes are designed to convert the energy of a moving vehicle into dissipate the heat heat energy. A higher density increases the lining's ability to ■ efficiently handle heat, and is the most critical component in a Higher density linings exhibit significantly better wear Guide friction material's fade, recovery and wear. characteristics, especially at higher temperatures ■ Higher density friction materials are more resistant to brake fade and water fade ■ Higher density friction materials have stronger structural integrity, making them less likely to crack in service, while riveting or due to rust jacking See the difference... higher density Marathon linings tip the scale vs. leading competitor 554 125 Old Mill Road • Cartersville, GA 30120 Call 800.223.5201 or visit CERTIFIED MarathonBrake.com Application Guide AHA 3M 12/10 ©2010 Marathon Brake Systems, Inc. Printed in U.S.A ApplicationGuide_Layout 1 11/24/10 5:03 PM Page 3 Brake Lining Application Guide MarathonBrake.com Severe Medium Light Severe Medium Light Duty Duty Duty Duty
    [Show full text]
  • Brake Lining Application Guide Brake Lining App
    Brake Lining Application Guide Brake Lining App Severe Medium Light Duty Duty Duty HEAT Tandem Axle Tractor Trailer Best HS HS HS20 23,000 lb Better — FLOE FS20 Good — MV23 MV20 Friction Code: FF Double Trailer Density: 2.28 Edge Color: Red HS HS HS20 — FLOE FS20 — MV23 MV20 First Line Van Trailer FLOE Original Equipment HS HS HS20 23,000 lb — FLOE FS20 — MV23 MV20 Friction Code: FF Single Axle Tractor Trailer Density: 2.25 HS HS HS20 Edge Color: Brown — FLOE FS20 — MV23 MV20 Container Chassis HS HS HS20 MV23 Marathon Value — FLOE FS20 23,000 lb — MV23 MV20 Livestock Trailer Friction Code: GF HS HS HS20 Density: 2.20 — FLOE FS20 Edge Color: None — — — Car Trailer HS HS HS20 — FLOE FS20 MBC Metallic Brass Combo — — — 23,000 lb Tandem Axle Mixer KVT HS — Friction Code: FF HS FLOE — TS — — Density: 2.89/2.28 Edge Color: Single Axle Dump Truck Red/Stripe KVT HS — HS FLOE — TS — — MBS Metallic Brass Single Tandem Axle Dump Truck KVT HS — 23,000 lb HS FLOE — TS — — Friction Code: FF Tri-Axle Dump Trailer Density: 2.89 KVT HS — Edge Color: Stripe HS FLOE — TS — — plication Guide MarathonBrake.com Severe Medium Light Duty Duty Duty HS20 Logging Trailer HEAT Best KVT/MBS HS HS20 Better MBC FLOE — Good TS — — 20,000 lb Flatbed Trailer Friction Code: FF HS HS HS20 Density: 2.21 — FLOE FS20 OEAPPROVED Edge Color: Blue — MV23 MV20 Tanker FS20 KVT HS HS20 MBC FLOE FS20 FLEET — — — Dry Bulk 20,000 lb KVT HS HS20 Friction Code: FF MBC FLOE FS20 Density: 2.22 — — — Edge Color: Light Blue Straight Truck HS HS HS20 — FLOE FS20 Marathon Value MV20 — MV23 MV20 20,000 lb Transit/Coach Bus MBST HS — Friction Code: FF KVT — — Density: 2.20 — — — Edge Color: None School Bus KVT HS HS20 — FLOE — — — — Vocational KVT Single Axle Refuse Truck 26,000 lb KVT HS — MBS FLOE — Friction Code: FF MBC — — Density: 2.13 Tandem Axle Refuse Truck Edge Color: KVT HS — Purple MBS FLOE — MBC — — Fire Truck Traction Stopper KVT MBS HS TS TS MBC FLOE 25,000 lb — — — Friction Code: GG Density: 2.17 Edge Color: Stripe The Marathon Advanta ge..
    [Show full text]
  • Brake Adjuster's Handbook
    STATE OF CALIFORNIA HANDBOOK FOR BRAKE ADJUSTERS May 2015 BUREAU OF AUTOMOTIVE REPAIR BRAKE ADJUSTERS’ HANDBOOK FOREWORD This Handbook is intended to serve as a reference for Official Brake Adjusting Stations and as study material for licensed brake adjusters and persons desiring to be licensed as adjusters. See the applicable Candidate Handbook for further information. This handbook includes a short history of the development of automotive braking equipment, and the procedures for licensing of Official Brake Adjusting Stations and Official Brake Adjusters. In addition to the information contained in this Handbook, persons desiring to be licensed as adjusters must possess a knowledge of vehicle braking systems, adjustment techniques and repair procedures sufficient to ensure that all work is performed correctly and with due regard for the safety of the motoring public. This handbook will not supply all the information needed to pass a licensing exam. No attempt has been made to relate the information contained herein to the specific design of a particular manufacturer. Accordingly, each official brake station must maintain as references the current service manuals and technical instructions appropriate to the types and designs of brake systems serviced, inspected and repaired by the brake station. Installation, repair and adjustment of motor vehicle brake equipment shall be performed in accordance with applicable laws, regulations and the current instructions and specifications of the manufacturer. Periodically, supplemental bulletins may be distributed by the Bureau of Automotive Repair (BAR or Bureau) containing information regarding changes in laws, regulations or technical procedures concerning the inspection, servicing, repair and adjustment of vehicle braking equipment.
    [Show full text]
  • Friction Material Basics and Brake Shoe Remanufacturing Procedures
    an brand SP-01100 IssuedRev 07/08 6/01 Friction Material Basics and Brake Shoe Remanufacturing Procedures Handbook for a Better Understanding of How Friction Materials are Specified Table of Contents Section 1 .................................................................................................................................. 3 Friction Basics / The Fundamentals of Braking How friction material works and it’s role in a brake system. Section 2 ................................................................................................................................ 25 Meritor Lining Qualification and Application What the ArvinMeritor lining approval process means in regard to friction quality and how to understand the technical selling points and interpret a spec sheet. Section 3 ................................................................................................................................ 48 Air Cam Foundation Brake Troubleshooting Friction material is one of many components in a brake system. What are the most common causes of brake problems? Section 4 ................................................................................................................................ 72 Brake Shoe Remanufacturing Procedures The proper inspection procedures, brake shoe checks, lining selection and installation, and final inspection. Provides a set of standards for remanufacturing brake shoes. 2 SECTION 1 - FRICTION BASICS FUNDAMENTALS OF BRAKING The discovery of the wheel was a tremendous technological “leap
    [Show full text]
  • Copper Released from Brake Lining Wear in the San Francisco Bay Area
    Copper Released from Brake Lining Wear in the San Francisco Bay Area Kirsten Sinclair Rosselot Process Profiles Calabasas, California January 2006 Prepared for the Brake Pad Partnership Copper Released from Brake Lining Wear in the San Francisco Bay Area Table of Contents Executive Summary........................................................................................................................ 1 1 Introduction............................................................................................................. 6 2 Air Emission Factors for Copper from Brake Lining Wear ................................. 10 2.1 Passenger Cars and Light-Duty Trucks ................................................................ 10 2.1.a Summary of Values Assigned to Variables .......................................................... 10 2.1.b Emission Factor Calculations ............................................................................... 13 2.1.c Final Result ........................................................................................................... 15 2.2 Medium-Duty Vehicles......................................................................................... 20 2.2.a Summary of Values Assigned to Variables .......................................................... 20 2.2.b Emission Factor Calculations ............................................................................... 20 2.2.c Final Result ..........................................................................................................
    [Show full text]
  • Window Sticker
    {"maker":"BUICK", "model_year":"2022", "mmc_code":" 4TS06", "vin":"KL4MMDSL9NB010844", "sitedealer_code":" 39320", "sell_source": "11", "order_number": "ZMRT98", "creation_date":"6/23/2021", "Options":["AAL", "AED", "AEQ", "AHU", "AIB", "AIF", "AJC", "AKK", "AKO", "AKX", "AK9", "AL0", "AL9", "ASV", "ATH", "AXG", "AXP", "AYF", "A2X", "A50", "A64", "A69", "A7E", "A70", "BHO", "BTM", "BTT", "BTV", "BUP", "BXQ", "B32", "B33", "B7S", "B70", "CJ2", "C25", "C3U", "C32", "C35", "C4U", "C75", "DA5", "DG6", "DMS", "D06", "D31", "D7A", "D7P", "ECK", "EF7", "ENL", "E22", "E27", "E90", "FE2", "FE9", "FHA", "FJW", "FWD", "F8J", "GFM", "HWH", "IKP", "IOU", "JBP", "JE0", "JL9", "J22", "J71", "KA1", "KL9", "KNV", "KQX", "KRV", "KSG", "K1O", "K12", "LHD", "L3T", "MAH", "MCR", "MDT", "MM1", "MRG", "NCH", "NE8", "NJ1", "NKC", "NTB", "N34", "N37", "PCJ", "PDC", "PPW", "QAI", "Q8E", "RQK", "RSR", "R6J", "R9N", "SJQ", "SLM", "TC2", "TDM", "TQ5", "TS6", "TUU", "TVM", "T3U", "T4A", "T7E", "T83", "UC3", "UDD", "UD7", "UEU", "UE1", "UE4", "UFG", "UHG", "UHH", "UHX", "UHY", "UJM", "UKC", "UKE", "UKJ", "UK4", "UMN", "UQL", "UQ3", "USS", "UTJ", "UUT", "UV2", "UV7", "U05", "U2K", "U25", "U80", "U91", "VB5", "VEY", "VGC", "VHM", "VIX", "VMJ", "VNU", "VRF", "VRG", "VRH", "VRI", "VRK", "VRL", "VRM", "VRN", "VRR", "VV4", "V2P", "V48", "V8D", "V92", "WMW", "WPA", "XL8", "Y6L", "ZDC", "0ST", "1NF", "1SD", "1SZ", "2NF", "2ST", "3ST", "4JO", "4ST", "5FC", "5H1", "5ST", "6X1", "7X1", "8X2", "9X2", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "",
    [Show full text]
  • HUBBELL Brake Systems Designed to AISE / to DIN 15435
    HUBBELL Brake Systems Designed to AISE / to DIN 15435 Brake protection in perfection. www.hubbell-icd.com HUBBELL Brake Systems Designed to AISE / to DIN 15435. The EB Series Drum Brake: Is a single bar brake lever and made of all steel. Adjus- ting bolts (manual) to evenly lift brake shoes. The spring tube is enclosed to protect against contaminants and/or damage. Characteristics: 1. Single-bar brake lever 2. Adjustable Stops for brake levers 3. Brake shoe holding clip The RT Series Drum Brake: Is a single bar brake lever and made of all steel. Optimal for a combination with an automatic wear adjustment. Synchro-lifting-mechanism (spring) at drum brake type RT guarantees automatically an uniform lifting gap between brake lining + brake drum. Characteristics: 1. Single-bar brake lever 2. Synchro-lifting-mechanic 3. Brake-shoe holding clip AISE DIN 15435 Standard sizes: 8-19 in. Ø 200-710 mm according to DIN 15435 Standard drum diameter: 8-28 in Ø 200 - 710 mm Torque: 220-3700 lb/ft 50 - 10,000 Nm ( at ɥ = 0,4) Standard voltages: USA 265/460 V, 60 Hz, 3 ~ (other voltages available on request) Thruster: Type H insulation Thruster operating temperatures: Standard -13°F up to +122°F Low Temp -13°F up to -40°F High Temp +122°F up to +158°F Applications: Movable Lift Bridges Stacker / Reclaimer Port and Shipyard Cranes Gantry Cranes Steel Mill Cranes Overhead Cranes Features / Standard: Adjustable stops (EB series) OR synchro lifting mechanism (RT series) for uniform lifting gap between brake lining and brake drum Enclosed spring tube protects
    [Show full text]
  • Checking Wheel Brake Wear
    1 Issue 1 en Checking Wheel Brakes Wear © Scania CV AB 2006, Sweden Contents Disc Brakes .................................................................................. 3 Removing the wheels ............................................... 4 Checking the Brake Pads.......................................... 5 Check brake disc thickness....................................... 7 Checking brake disc for cracks................................. 8 Drum Brakes .................................................................................. 9 Measurement of brake lining thickness.................. 10 Removal.................................................................. 11 Fitting ..................................................................... 13 Checking brake drum ............................................. 14 © 2 Scania CV AB 2006, Sweden Disc Brakes ! WARNING! Work on the brake system is only to be carried out by personnel with sufficient training and knowledge. If problems arise, contact your supervisor for assistance. When working on the brake system, it is important to follow the instructions to avoid accidents and injury. It is also important to use the correct components when carrying out work on the brakes. A brake system which fails due to faulty components can have disastrous consequences on the road. © Scania CV AB 2006, Sweden 3 Removing the wheels In most instances, the wheels must be removed whilst work is carried out on the disc brakes. 1 Support the axle on stands. ! WARNING! Never work under a vehicle supported by jacks only. Always use stands. If the axle is air suspended, the air bellows must be emptied. 2 Release the parking brake. 3 Remove the wheels. Use wheel hoist trolley 587 121. 07:0253 © 4 Scania CV AB 2006, Sweden Checking the brake pads Specifications Brake disc, thickness Minimum permissible brake pad lining thick- ness > 40 mm 2 mm 37-40 mm 4 mm Instructions General The brake caliper position indicates the wear of the brake disc and the brake pads.
    [Show full text]
  • Disc Brake Maintenance Manual MM-99108
    Issued 05-00 $2.50 Air-Actuated Disc Brake Maintenance Manual MM-99108 D-LISA Service Notes BeforeService Notes You Begin Access Product and Service TM This manual provides installation and Information in the DriveTrain Plus maintenance procedures for Meritor’s air-actuated by ArvinMeritor Tech Library on disc brake (D-LISA). Before you begin procedures: our Web Site 1. Read and understand all instructions and Enter the following address in your browser’s procedures before you begin to service address box. The screen will display an index of components. publications by category. Bookmark this screen for 2. Read and observe all Caution and Warning quick access to the Tech Library. safety alerts that precede instructions or arvinmeritor.com/tech_library/home.asp procedures you will perform. These alerts help to avoid damage to components, serious personal injury, or both. To Order Information by Phone 3. Follow your company’s maintenance and Call ArvinMeritor’s Customer Service Center at service, installation, and diagnostics 800-535-5560 to order the following item. guidelines. O Drivetrain PlusTM by ArvinMeritor Technical 4. Use special tools when required to help avoid Electronic Library on CD. Features product serious personal injury and damage to and service information on most Meritor, components. ZF Meritor and Meritor WABCO products. $20. Order TP-9853. Safety Alerts, Torque Symbol and Notes A Warning alerts you to an WARNING instruction or procedure that you must follow exactly to avoid serious personal injury and damage to components. A Caution alerts you to an CAUTION instruction or procedure that you must follow exactly to avoid damage to components and possible serious injury.
    [Show full text]
  • Bendix Brake Linings Are Specifically Process Date Tailored to Meet Your Requirements
    34493 BendixDW 8/16/05 8:49 AM Page 1 Bendix® Brake Linings OEMOEM Certified Stopping Power a product of 34493 BendixDW 8/17/05 7:23 AM Page 2 Bendix® Lining Identification Bendix Standard Platform OEM Certified Stopping Power (Bendix Colored Lining) Bendix – a name you can trust Whether you're performing light Lining Designation – Choose the lining that’s on-highway hauling, severe duty stop right for your fleet and go, or tough off-highway service, Coefficient of Friction Rating ® Manufacturing Batch Code and Bendix brake linings are specifically Process Date tailored to meet your requirements. Bendix offers a wide selection of lin- ings including Extended and Standard platforms, Fiberglass to metallic fibers and GAWR’s of 13,200 to 29,000 lbs. Be assured that Bendix brake linings are engineered to provide safe, consistent, and reliable performance and are precision made for specific applications. Bendix “ES” Extended Service Platform Manufactured and assembled in the Bendix – a name you can trust United States and Canada, all Bendix Lining Designation – Choose the lining that’s linings are made exclusively with right for your fleet premium compounds. When it comes Coefficient of Friction Rating Manufacturing Batch Code and to durability, reliability, and long-term Process Date wear, select Bendix, the brake lining with OEM certified stopping power. 34493 BendixDW 8/16/05 8:50 AM Page 3 Bendix Friction Application Chart Extended GAWR Standard Service General Application Platform Platform 17,000 Green – Light duty friction for mid-range
    [Show full text]
  • Trailer Axles Installation and Operation Manual Trailer Axles
    TRAILER AXLES INSTALLATION AND OPERATION MANUAL TRAILER AXLES Delivering Suspension Solutions Delivering Suspension Solutions For more information, call 800.445.0736 11621.SLDDRW 4/28/2009 8:36 AM WELD PROCEDURE FOR MONO PIVOT BUSHING TYPE ARMS Welding Procedures Preparation Warning ! Clean welds between passes and incorporate tacks REFER TO ES006 FOR ALIGNMENT TO AXLE into the first pass on the tacked side. Fill weld craters and 1. The surface must be free of paint, water, avoid undercuts and cold laps over welds. and other contaminants where welding is to occur. Welds should not be started or stopped at the end of the weld pass. 2. Suspension parts must be at least 60°F. * Normal They should stopped and started away from the ends as shown in Figure 7. recommendations is to preheat Do not wrap the corners of the axle seat while welding. 100-300 degrees F. 1. Three passes are required on each area where the axle is welded to the arms. * Note: Some axle manufacturers recommend preheating Figure 6 shows the size of the weld of each pass. the axle before it is welded. Consult the axle 2. Start welding in the sequence shown in Figure 7 at the rear side where the axle manufacturer for recommended guidelines on and seat meet . Make all first pass welds at all areas before proceeding to the welding to the axle. second pass. 3. Welding needs to be done in a flat horizontal position. 3. Figure 7 also shows the length of weld for both overslung and underslung models. Welding Axle to Suspension WELD PROCEDURE FOR COMMON: Weld Specifications Caution ! The welding procedures must be followed carefully to avoid damage to the axle and suspension which could cause an accident and or serious personal injury.
    [Show full text]
  • Air Suspensions & Axles with Drum Brakes
    General Operating and Service Manual Air suspension systems and axles with drum brakes Edition 04/2007 Vehicle and axle identification Air suspension system, Type INTRA The axle type designation (Version), identification number and serial number (see type plate) are required for the warranty procedure. Air suspension system, Type MODUL Type plate SAF-HOLLAND GMBH D-63856 BESSENBACH · GERMANY 07 284 05 1 0 Identification if the type plate is missing: The Serial No. of the axle is embossed in the SV11484GB Edition 04/2007 · Last updated 2007-04-03 · Amendments and errors reserved © SAF-HOLLAND SV11484GB Edition 04/2007 · Last updated 2007-04-03 axle end on the right-hand side (as seen in GBD 2 the direction of travel). Vehicle and axle identification Trailer manufacturer.................................................................................................................. Body type.................................................................................................................................. Chassis No. .............................................................................................................................. Date of delivery/date of registration ........................................................................................ Spare parts service for SAF-HOLLAND axles and suspension systems Exact type designations are required for spare parts orders. Please enter the identification data of the suspension system in the type plate illustrated below so that the correct information is available
    [Show full text]