0007Product Certification

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

BRE Global Limited

Issue No: 092 Issue date: 05 May 2021

Bucknalls Lane Contact: David Gall Garston Tel +44 (0)1923 664527

Watford E-Mail: [email protected] 0007 Hertfordshire Website: www.bregroup.com Accredited to ISO/IEC17065:2012 to WD25 9XX provide product conformity certification

Locations where certification activities covered by the above Accreditation Standard are undertaken

BRE Global Limited Garston Watford Hertfordshire WD25 9XX United Kingdom

Assessment Manager: JJ Page 1 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

DETAIL OF ACCREDITATION Product Standard

CONSTRUCTION PRODUCTS

Building hardware BS EN 179:1998 BS EN 1125:1997

Fire doors, lift landing doors and shutters LPS 1056

Trussed rafters BS 5268:Part 3:2006

Enhanced security performance requirements for SD204 Scheme LPCB Approval of Window and windows and doorsets Doorsets

and PAS 24

Performance of windows and doors. Classification for BS 6375-1:2009 weathertightness and guidance on selection and specification

Performance of windows and doors. Classification for BS 6375-2:2009 operation and strength characteristics and guidance on selection and specification

Performance of windows and doors. Classification for BS 6375-3:2008 additional performance characteristics and guidance on selection and specification

Timber windows and doorsets. Fully finished factory- BS 644:2012 assembled windows and doorsets of various types. Specification

Pedestrian doorsets and door frames made from steel BS 1245:2012 sheet. Specification

Aluminium alloy windows and doorsets. Specification BS 4873:2016

Steel-framed windows and glazed doors. Specification BS 6510:2010

Assessment Manager: JJ Page 2 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

CONSTRUCTION PRODUCTS (cont’d)

Specification for windows and doorsets made from BS7412:2007 unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles

Composite doorsets. Domestic external doorsets. BS 8529:2010 Specification

Pedestrian doorsets, windows, curtain walling, grilles EN 1627:2011 and shutters. Burglar resistance. Requirements and classification

Windows and doors. Product standard, performance EN 14351-1:2006 characteristics Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

Where appropriate the above includes:

Metal Anchors for use in Concrete ETAG 001 Part 1: Anchors in General

Metal Anchors for use in Concrete ETAG 001 Part 2: Torque-Controlled Expansion Anchors

Metal Anchors for use in Concrete ETAG 001 Part 3: Undercut Anchors

Metal Anchors for use in Concrete ETAG 001 Part 4: Deformation-Controlled Expansion Anchors

Metal Anchors for use in Concrete ETAG 001 Part 5: Bonded Anchors

Assessment Manager: JJ Page 3 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

CONSTRUCTION PRODUCTS (cont’d)

Metal Anchors for use in Concrete ETAG 001 Part 6: Anchors for multiple use for Non-Structural Applications

Structural Sealant Glazing Systems (SSGS) ETAG 002 Part 1: Supported and Unsupported Systems

Structural Sealant Glazing Systems (SSGS) ETAG 002 Part 2: Coated Aluminium Systems

Structural Sealant Glazing Systems (SSGS) ETAG 002 Part 3: Systems incorporating Profiles with Thermal Barrier

Internal Partition Kits for use as Non-Load-Bearing ETAG 003 Walls

External Thermal Insulation Composite Systems with ETAG 004 Rendering

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 1: General

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 2: Specific stipulations for Kits based on Polymer Modified Bitumen Emulsions and Solutions

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 4: Specific stipulations for Kits based on Flexible Unsaturated Polyester

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 5: Specific stipulations for Kits based on Hot Applied Polymer Modified Bitumen

Assessment Manager: JJ Page 4 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

CONSTRUCTION PRODUCTS (cont’d)

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 6: Specific stipulations for Kits based on Polyurethane

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 7: Specific stipulations for Kits based on Bitumen Emulsions and Solutions

Liquid Applied Roof Waterproofing Kits ETAG 005 Part 8: Specific stipulations for Kits based on Water Dispersible Polymers

Systems of Mechanically Fastened Flexible Roof ETAG 006 Waterproofing Membranes

Timber Frame Building Kits ETAG 007

Prefabricated Stair Kits in General (Excluding severe ETAG 008 climatic conditions)

Non-Load-Bearing Permanent Shuttering Kits/Systems ETAG 009 based on Hollow Blocks or Panels of Insulating Materials and sometimes Concrete

Self Supporting Translucent Roof Kits ETAG 010

Light Composite Wood-Based Beams and Columns ETAG 011

Log Building Kits ETAG 012

Post-Tensioning Kits for Pre-stressing of Structures ETAG 013

Plastic Anchors for fixing of External Thermal Insulation ETAG 014 Composite Systems with Rendering

Assessment Manager: JJ Page 5 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

CONSTRUCTION PRODUCTS (cont’d)

Plastic Anchors for fixing of External Thermal Insulation ETAG 014 Composite Systems with Rendering

Three-Dimensional Nailing Plates ETAG 015

Self-Supporting Composite Lightweight Panels ETAG 016 Part 1: General

Self-Supporting Composite Lightweight Panels ETAG 016 Part 2: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Roofs

Self-Supporting Composite Lightweight Panels ETAG 016 Part 3: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in External Walls and Claddings

Self-Supporting Composite Lightweight Panels ETAG 016 Part 4: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Internal Walls and Ceilings

Fire Protective Products EAD 350141-00-1106 Part 2: Reactive Coatings for Fire Protection of Steel Elements

Fire Protective Products EAD 350141-00-1106 Part 4: Fire Protective Board, Slab and Mat Products and Kits

Plastic Anchors for multiple use in Concrete and ETAG 020 Masonry for Non-Structural Applications Part 2: For use in normal weight Concrete

Plastic Anchors for multiple use in Concrete and ETAG 020 Masonry for Non-Structural Applications Part 3: For use in Solid Masonry Materials

Assessment Manager: JJ Page 6 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

CONSTRUCTION PRODUCTS (cont’d)

Plastic Anchors for multiple use in Concrete and ETAG 020 Masonry for Non-Structural Applications Part 4: For use in Hollow or Perforated Masonry

Plastic Anchors for multiple use in Concrete and ETAG 020 Masonry for Non-Structural Applications Part 5: For use in Autoclaved Aerated Concrete

Plastic Anchors for Fixing of External Thermal ISO 7290-4 Insulation Composite Systems with Rendering

Cold Storage Premises Kits ETAG 021 Part 1: Cold Storage Room Kits

Cold Storage Premises Kits ETAG 021 Part 2: Cold Storage Building Envelope and Building Kits

Prefabricated Building Units ETAG 023

Concrete Frame Building Kits ETAG 024

Metal Frame Building Kits ETAG 025

Renderings and Rendering Kits Intended for Fire EAD350140-00-1106 Resisting Applications

Fire Stopping and Fire Sealing Products Linear Joint EAD350141-00-1106 and Gap Seals

Fire Stopping and Fire Sealing Products Penetration EAD350454-00-1106 Seals

Fire Protective Products Reactive Coatings for Fire EAD350402-00-1106 Protection of Steel Elements

Assessment Manager: JJ Page 7 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE DETECTION COMPONENTS AND SYSTEMS

Control Panels

Design, installation, commissioning, and servicing of LPS 1014 fire detection and alarm systems

Components using radio link LPS 1257 EN 54-25

Control and indicating equipment EN 54-2 ISO 7240-2:2003

Voice alarm control and indicating equipment EN 54-16 Sound system control and indicating equipment ISO 7240-16:2007

Alarm transmission and fault warning routing EN 54-21 equipment ISO 7240-21:2005

Power supplies EN 54-4 ISO 7240-4:2003

Compatibility of fire detection of alarm systems LPS 1054 EN 54-13

Manual call points BS 5839:Part 2 ISO 7240-11:2011 EN 54-11

Line units CEA GEI-052, EN 54-18 - input/output devices EN 54-17 - short-circuit isolators

Audible fire alarm devices - EN 54-3 - sounders EN 54-23 - beacons EN 54-24 - loudspeakers

Assessment Manager: JJ Page 8 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE DETECTION COMPONENTS AND SYSTEMS (cont’d)

Control Panels (cont’d)

Fire detection and fire alarm systems Part 17: Short- ISO 7240-17:2009 circuit isolators

Fire detection and fire alarm systems Part 18: ISO 7240-18:2017 Input/Output devices

Extinguishing systems, electrical automatic control and EN 12094-1 delay devices

Detectors (commercial)

Heat detectors EN 54-5:2000 + A1:2002 EN 54-5:2018 + A1:2018 BS 5445:Part 5 ISO 7240-5:2012

Heat detectors (high temperature) BS 5445:Part 8

Linear heat detector prEN 54-22

Duct detector LPS 1280 EN 54-27

Smoke detectors EN 54-7:2018 ISO 7240-7:2011 BS 5445: Part 7

Aspirating smoke detectors - point detectors EN 54-20 CEA 4022

Optical beam smoke detector BS 5839:Part 5 EN 54-12 ISO 7240-12:2014

Assessment Manager: JJ Page 9 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE DETECTION COMPONENTS AND SYSTEMS (cont’d)

Detectors (commercial) (cont’d)

Flame detectors EN 54-10 ISO 7240-10:2012

Multisensor fire detectors CEA 4021 ISO 7240-15:2014 EN 54 29

Carbon monoxide fire detector LPS 1265, ISO 7240-6:2004 - with heat enhancement detector LPS 1274 - with heat and optical detection LPS 1279 EN 54-26 EN 54-30 EN 54-31

Domestic smoke detectors BS 5446:Part 1:2000 EN 14604

Domestic carbon monoxide detectors BS 7860 EN 50291

Heat detectors BS 5446-2:2003

Smoke alarms for the deaf and hard of hearing BS 5446-3:2015

Assessment Manager: JJ Page 10 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE DETECTION COMPONENTS AND SYSTEMS (cont’d)

Cables

Fire performance cables BRE Global Scheme Document SD 024

Armoured fire-resistant cable 600-1000 V BS 7846:2015

Armoured fire-resistant cable 450-750 V BS 8592:2016

Thermoset insulated cables BS 7629:Parts 1 and 2

Mineral insulated cables rating not exceeding 750 v BS 6207-1 EN 60702-1

Fire detection and fire alarm systems for buildings - BS 5839 1, Clauses 26.2d and 26.2e cables

Cables required to maintain circuit integrity under fire BS 6387 conditions IEC 60331-1:2018 IEC 60331-2:2018 IEC 60331-3:2018

Unprotected small cables for use in emergency circuits EN 50200 BS 8434-1 BS 8434-2

Fire resistance requirements for electric cables IEC 331 IEC 60331-Parts 21, 23, 25 and 31

Vertical flame propagation for single insulated electrical EN 60332-1-2: 2004+A1 and optical fibre cables EN60332-1-2004+A11:2016 IEC 600332-1-2004+AMD1:2015

Cables for smoke and heat control systems and other BS 7346-6 active fire safety systems BS 8491

Selection and installation of fire-resistant power and BS 8519:2010 (Clause 11 only) control cable systems

Assessment Manager: JJ Page 11 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE DETECTION COMPONENTS AND SYSTEMS (cont’d)

Cables (cont’d)

Fire resistant vertically mounted bunched wires or IEC 60332-3 cables EN 50266 EN 60332-3

Cables with enhanced performance burning under BS 7622-2 defined conditions EN 50268-2 EN 61034-2 IEC 61034-2

Cables with enhanced performance under combustion BS 6425-1 conditions EN 50267-2-1 IEC 60754-1 EN 50267-2 and 3 IEC 60754-2

Cables with an overall diameter of 20 mm IEC 60331-1:2018 Cables with an overall diameter of under 20 IEC 60331-2:2018 Cables tested in metal enclosures IEC 60331-3:2018

FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS

LPCB approval of Fire Suppression Products SD0228

Fire hose reels European Standards 671-1

Fixed fire protection systems LPS 1048

Pumps LPS 1131

Pipe couplings, flexible hoses, plastic pipes LPS 1219, 1260, 1261

Fire hose couplings and ancillary equipment BS 336:1989

Firefighting hoses - semi-rigid hoses for fixed systems BS 694

Assessment Manager: JJ Page 12 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS (cont’d)

Non-percolating layflat delivery hoses and hose BS 6391 assemblies for firefighting purposes

Sprinkler heads LPS 1039 and EN 12259-1

Valves LPS 1040

Tanks LPS 1254

Components for sprinkler and water spray systems - BS EN 12259-2 (A2) Wet alarm valve assemblies

Components for sprinkler and water spray systems - BS EN 12259-3 (A2) Dry alarm valve assemblies

Components for sprinkler and water spray systems - BS EN 12259-4 (A1) Water motor alarms

Components for sprinkler and water spray systems - BS EN 12259-5:2002 Water flow detectors

Fixed gaseous fire extinguishing systems LPS 1230

Gaseous fire extinguishing systems - physical BS ISO 14520-1:2006 and BS EN 15994-1 properties and system design - Part 1 SD 022

Installation, repair and servicing of portable fire BS 5306-3:2009 extinguishers SP 101

Above ground suction tanks for sprinkler systems LPS 1276

Fire Hydrant systems - Landing Valves for wet risers SD 141 - BS 5041-1:1987

Assessment Manager: JJ Page 13 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS (cont’d).

Fire hydrant systems - Inlet breechings for dry riser SD 142 - BS 5041-3 inlets

Fire blankets BS EN 1869:2019

Portable fire extinguishers EN 3 BS 7937:2000 BS 6165:2012

Components for halon and carbon dioxide fire LPS 1023 extinguishing systems. Requirements and containers.

Components for halon and carbon dioxide fire LPS 1024 extinguishing systems. Requirements and testing procedures for container valves.

Components for halon and carbon dioxide fire LPS 1027 extinguishing systems. Requirements and testing procedures for nozzles.

Components for halon and carbon dioxide fire LPS 1025 extinguishing systems. Requirements and testing procedures for valve actuating mechanisms.

Requirements and test methods for electrical automatic BS EN 12094-1:2003 control and delay devices

Non-electrical automatic control and delay devices BS EN 12094-2:2003

Manual triggering and stop devices BS EN 12094-3:2003

High pressure container valve assemblies and their BS EN 12094-4:2004 actuators

High and low-pressure selector valves and their BS EN 12094-5:2006 actuators for CO2 systems

Assessment Manager: JJ Page 14 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

FIRE SUPPRESSION AND EXTINGUISHING COMPONENTS AND SYSTEMS (cont’d)

Non-electrical disable devices for CO2 systems BS EN 12094-6:2006

Nozzles for CO2 systems Fpr EN 12094-7:2010

Flexible connectors CO2 systems BS EN 12094-8:2006

Special fire detectors BS EN 12094-9:2003

Pressure gauges and pressure switches BS EN 12094-10

Mechanical weighing devices BS EN 12094-11:2003

Pneumatic alarm devices BS EN 12094-12:2003

Check valves and non-return valves BS EN 12094-13:2001

Odorizing devices for CO2 low pressure systems BSEN 12094-16:2003

Pressure gauges prEN 12094-19:2012

Compatibility of components BS EN 12094-20:2003

Electronic Security Products

Scheme document for the certification of electronic SD 218 security products

Alarm systems — Intrusion and hold-up systems — EN 50131-2-2:2017 Part 2-2 Intrusion detectors — Passive infrared detectors

Alarm systems — Intrusion and hold-up systems — EN 50131-2-3:2008 Part 2-3 Requirements for microwave detectors

Assessment Manager: JJ Page 15 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

Electronic Security Products (cont’d)

Alarm systems — Intrusion and hold-up systems — EN 50131-2-4:2020 Part 2-4 Requirements for combined passive infrared EN 50131-2-4:2008 and microwave detectors

Alarm systems – Intrusion and hold-up systems –– Part EN 50131-2-6:2008 2-6 Opening contacts (magnetic)

Alarm systems — Intrusion and hold-up systems — EN 50131-3:2009 Part 3 Control and indicating equipment

Alarm systems — Intrusion and hold-up systems — EN 50131-6:2008+A1:2014 Part 6 Power supplies EN 50131-6: 2017

Alarm systems – Intrusion and hold-up systems –– Part EN 50131-4:2019 4: Warning devices

Alarm systems – Intrusion systems EN 50131-5-3:2017 Part 5 Requirements for interconnections equipment using radio frequency techniques

Alarm systems — Intrusion and hold-up systems — EN 50131-10:2014 Part 10 Supervised Premises Transceivers

Alarm systems — Alarm transmission systems and EN 50136-2:2013 equipment Part 2: Requirements for Supervised Premises Transceiver (SPT)

Alarm systems — Alarm transmission systems and EN 50136-3:2013 equipment Part 3: Requirements for Receiving Centre Transceiver (SPT)

Alarm and electronic security systems Part 11-1: EN 60839-11-1:2013 Electronic access control systems – system and components requirements

Requirements for LPCB approval and listing of alarm LPS1277_3.1:2014 transmission equipment

Assessment Manager: JJ Page 16 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

Passive Fire Protection Products

Scheme document for certification of passive fire SD198 protection products

Self-supporting double skin metal faced insulating BS EN 14509:2006 panels

Pedestrian doorsets, industrial, commercial, garage BS EN 16034:2014 doors and windows. Product standard, performance characteristics. Fire resistance and/or smoke control characteristics

Smoke and heat control systems. Smoke duct sections BS EN 12101-7:2011

Smoke and heat control systems. Smoke control BS EN 12101-8:2011 dampers

Smoke and heat control systems. Specification for BS EN 12101-2:2017 natural smoke and heat exhaust ventilators

Smoke and heat control systems. Specification for BS EN 12101-3:2015 powered smoke and heat exhaust ventilators

Test and Evaluation Requirements for the LPCB LPS1056 Approval and Listing of Fire Doorsets, Lift Landing Doors and Shutters.

Requirements, Tests and Methods of Assessment of LPS 1107 Passive Fire Protection for Structural Steel (Board and cementitious products).

Requirements and Tests for LPCB Approval of Wall LPS 1132 and Floor and Linear Gap Seals.

Requirements and tests for the LPCB Approval and LPS 1162 Listing of Fire Dampers.

Assessment Manager: JJ Page 17 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

Passive Fire Protection Products (cont’d)

Requirements and Tests for Built-up cladding and LPS 1181:Part 1 Sandwich Panel Systems for use as the External Envelope of Buildings

Requirements and Tests for Sandwich Panels and LPS 1181:Part 2 Built-up systems for use as internal constructions in buildings.

Fire Test and Evaluation requirements for the LPCB LPS 1195 Part 1 Approval and Listing of temporary buildings for use on construction sites.

Requirements for the LPCB Approval and Listing for LPS 1207 Fire Performance of Temporary Protective Covering Materials for Use in the Interior of Buildings.

LPCB Fire resistance requirements for elements of LPS 1208 construction used to provide compartmentation

Requirements for the LPCB Approval and Listing for LPS 1215 Fire Performance of Containment Net and Sheet Materials for External Use on Construction Sites

Requirements for the LPCB Approval and Listing of the LPS 1263 Fire Performance of Grease Filters used in Commercial Kitchen Extract Systems

Requirements for the LPCB approval and listing of LPS 1271 companies Installing fire and security doors, doorsets, shutters and active smoke/fire barriers

Requirements for the LPCB Approval and Listing of LPS 1500 companies installing construction elements used to provide compartmentation in buildings

Fire test and performance requirements for Innovative LPS 1501 Methods of Building Construction

Assessment Manager: JJ Page 18 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

Passive Fire Protection Products (cont’d)

Test and Evaluation Requirements for the LPCB LPS 1505 Approval and Listing of Roofing Systems – Protection against Fire from Outside the Building

Requirements for the LPCB Approval and Listing of LPS 1531 companies installing or applying passive fire protection product

Requirements and Tests for LPCB approval of Non- LPS 1581 load bearing External Cladding Systems applied to the masonry face of a building

Requirements and Tests for LPCB approval of Non- LPS 1582 load bearing External Cladding Systems fixed to and supported by a structural steel frame

LPCB/BWF Approval scheme for Fire Protected Stairs BD2569

Fire resistant ducts BS 476:Part 24 BS EN 1366-1:2014 BS EN 1366-1:2014 + A1:2020

Smoke barriers BS EN 12101:Part 1:2006 Natural smoke and heat exhaust ventilators BS EN 12101:Part 2:2003

Reaction to Fire (RTF) classifications for Materials and Non-combustible, Class 0 or BS EN 13501-1 Classified Products products

Fire Protection for Structural Steel - Intumescent Thin BS 476: Part 21 Film Coating Systems. EN 13381: Part 8

Renderings and Rendering Kits Intended for Fire EAD350140-00-1106 Resisting Applications

Fire Stopping and Fire Sealing Products Linear Joint EAD350141-00-1106 and Gap Seals

Assessment Manager: JJ Page 19 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

Passive Fire Protection Products (cont’d)

Fire Stopping and Fire Sealing Products Penetration EAD350454-00-1106 Seals

Cables

Power, control and communication cables - Cables for EN50575:2014 A1:2016 general applications in construction works subject to reaction to fire requirements

Test on gases evolved during combustion of materials EN 60754-1:2014 from cables. Determination of the halogen acid gas content

Test on gases evolved during combustion of materials EN 60754-2:2014 from cables. Determination of acidity (by pH measurement) and conductivity

SUSTAINABLE PRODUCTS MCS Installer Certification: MCS Installation Standards: (DECC)

Solar Collectors MCS 004-Solar Collectors

Micro and Small Wind Turbines MCS 006-Micro and Small Wind Turbines

Heat Pumps MCS 007-Heat Pumps

Micro and Small Wind Turbines MCS 006-Micro and Small Wind Turbines

Biomass MCS 008-Biomass

Roof mounting kits MCS 012–Pitched Roof Installation Kits

Assessment Manager: JJ Page 20 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Product Standard

SUSTAINABLE PRODUCTS (cont’d) MCS Product Certification MCS Scheme Requirements: (DECC)

Heat-led Micro - Co Generation Packages MCS 014-CHP

Electricity–led Micro-Co Generation Packages MCS 015-CHP

MCS 010-Generic factory production control

MCS 011-Testing and acceptance criteria

Environmental Profiles of Construction Products BRE Scheme Document SD 028

Certification activities associated with the assessment BRE Scheme Document SD123 ‘BREEAM Scheme of environmental performance for: Document’ a. Master planning; b. New construction of buildings; c. Buildings in use; d. Refurbishment of buildings; e. New construction of infrastructure; in the UK and Internationally

Responsible Sourcing in accordance with BES 6001 BRE Global Scheme Document SD186, incorporating Framework Standard for Responsible Sourcing BES6001 Framework Standard for Responsible Sourcing

END

Assessment Manager: JJ Page 21 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 96/577/EC EN 54-2:1997 Regulation 2011 Certification Body Fire alarm/detection, fixed EN 54-2:1997/A1:2006 (retained EU law EUR (AVCP) fire-fighting, fire and EN 54-2:1997/AC:1999 305/2011) as amended System 1 smoke control EN 54-5:2000/A1:2002 by the Construction and explosion EN 54-5:2018/A1:2018 Products (Amendment suppression products EN 54-3:2001/A1:2002 etc.) (EU Exit) (1/1) EN 54-3:2001/A2:2006 Regulations 2019 and EN 54-4:1997 the Construction EN 54-4:1997/A1:2002 Products (Amendment EN 54-4:1997/A2:2006 etc.) (EU Exit) EN 54-4:1997/AC:1999 Regulations 2020. EN 54-7:2018 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-11:2001 EN 54-11:2001/A1:2005 EN 54-12:2002 EN 54-12:2015 EN 54-16:2008 EN 54-17:2005 EN 54-17:2005/AC:2007 EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-21:2006 EN 54-23:2010 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012 EN 671-1:2001 EN 671-1:2001/AC:2002 EN 671-1:2012 EN 671-2: 2001 EN 671-2:2001/A1:2004 EN 671-2:2012 EN 15650:2010

Assessment Manager: JJ Page 22 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 96/577/EC EN 12094-1:2003 Regulation 2011 Certification Body Fire alarm/detection, fixed EN 12094-2:2003 (retained EU law EUR (AVCP) fire-fighting, fire and EN 12094-3:2003 305/2011) as amended System 1 smoke control EN 12094-4:2004 by the Construction (cont’d) and explosion EN 12094-5:2006 Products (Amendment suppression products EN 12094-6:2006 etc.) (EU Exit) (1/1) EN 12094-7:2000 Regulations 2019 and (cont’d) EN 12094-7:2000/A1:2005 the Construction EN 12094-8:2006 Products (Amendment EN 12094-9:2003 etc.) (EU Exit) EN 12094-10:2003 Regulations 2020. EN 12094-11:2003 (cont’d) EN 12094-12:2003 EN 12094-13:2001 EN12094-13:2001/AC:2002 EN 12101-2:2003 EN 12101-3:2015 EN 12101-7:2011 EN 12101-8:2011 EN 12259-1:1999 +A1:2001 EN 12259- 1:1999+A1:01/A2:04 EN 12259- 1:1999+A1:01/A3:06 EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002 EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005 EN 12259-4:2000/A1:2001 EN 12259-5:2002 EN 14604:2005 EN 14604:2005/AC:2008

Annex V- Product 2017/C 435/07 + EAD350140-00-1106 Certification Body 99/454/EC (2017) (AVCP) Fire stopping, fire sealing EAD350141-00-1106 System 1 and fire protection (2017) products (1/2) EAD350454-00-1106 (2017)

Assessment Manager: JJ Page 23 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 2017/C 435/07 + EAD350140-00-1106 Regulation 2011 Certification Body 99/454/EC (2017) (retained EU law EUR (AVCP) Fire stopping, fire sealing EAD350141-00-1106 305/2011) as amended System 1 and fire protection (2017) by the Construction products (2/2) EAD350454-00-1106 Products (Amendment (2017) etc.) (EU Exit) Regulations 2019 and the Construction Annex V- Product 2017/C 435/07 + EAD 350402-00-1106 (2017) Products (Amendment Certification Body 99/454/EC etc.) (EU Exit) (AVCP) Fire stopping, fire sealing Regulations 2020. System 1 and fire protection (cont’d) products (1/2)

Annex V- Product 2017/C 435/07 + EAD 078-00-1106 (2017) Certification Body 99/454/EC (AVCP) Fire stopping, fire sealing System 1 and fire protection products (2/2)

Annex V- Product 2011/284/EU Power, EN 50575:2014 + A1:2016 Certification Body control and (AVCP) communication cables System 1+ (1/3):- Power, control and communication cables (for uses subject to regulations on reaction to fire).

Assessment Manager: JJ Page 24 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - FPC 96/581/EC EN 13249:2000 Regulation 2011 certification body to Geotextiles (1/2) EN 13249:2000/A1:2005 (retained EU law EUR system 2+ EN 13250:2000 305/2011) as amended EN 13250:2000/A1:2005 by the Construction EN 13251:2000 Products (Amendment EN 13251:2000/A1:2005 etc.) (EU Exit) EN 13252:2000 Regulations 2019 and EN 13252:2000/A1:2005 the Construction EN 13253:2000 Products (Amendment EN 13253:2000/A1:2005 etc.) (EU Exit) EN 13254:2000 Regulations 2020. EN 13254:2000/A1:2005 (cont’d) EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003

Annex V- Product 96/582/EC ETAG 001 – 1 Certification Body Metal anchors for use in ETAG 001 – 2 (AVCP) concrete (mechanical ETAG 001 – 3 System 1 fasteners ETAG 001 – 3 Amendment ETAG 001 – 4 ETAG 001 – 5 ETAG 001 – 6 ETAG 001 – 6 Amendment

Assessment Manager: JJ Page 25 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 96/582/EC ETAG 002 – 1 Regulation 2011 Certification Body Structural sealant glazing ETAG 002 – 2 (retained EU law EUR (AVCP) kits of types (curtain ETAG 002 – 3 305/2011) as amended System 1 walling): - by the Construction Structural sealant glazing Products (Amendment kits, Types II and IV (for etc.) (EU Exit) external walls and roofs). Regulations 2019 and the Construction Products (Amendment Annex V - FPC 97/176/EC EN 14250:2010 etc.) (EU Exit) certification body to Structural timber products Regulations 2020. system 2+ (1/3) (cont’d)

Annex V - FPC 97/462/EC EN 13986:2004 certification body to Wood-based panels (1/2) system 2+

Annex V - Product 97/462/EC EN 13986:2004 Certification Body Wood-based panels (1/2) (AVCP) System 1

Annex V - Product 97/462/EC EN 13986:2004 Certification Body Wood-based panels (2/2) (AVCP) System 1

Annex V - Product 99/93/EC EN 14351-1:2006+A1:2010 Certification Body Doors, windows, shutters, (AVCP) blinds, gates and related System 1 building hardware (1/1)

Annex V - FPC 97/463/EC ETAG 014 certification body to Plastic anchors for use in system 2+ concrete and masonry (1/1)

Assessment Manager: JJ Page 26 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - Product 97/556/EC ETAG 004 Version 08/2011 Regulation 2011 Certification Body External thermal (retained EU law EUR (AVCP) insulation composite 305/2011) as amended System 1 systems/kits with by the Construction rendering (ETICS) (1/1) Products (Amendment etc.) (EU Exit) Regulations 2019 and Annex V - FPC 97/556/EC ETAG 004 Version 08/2011 the Construction certification body to External thermal Products (Amendment system 2+ insulation composite etc.) (EU Exit) systems/kits with Regulations 2020. rendering (ETICS) (1/1) (cont’d)

Annex V - FPC 97/638/EC ETAG 015 certification body to Fasteners for structural system 2+ timber products (1/1)

Annex V - FPC 98/143/EC ETAG 006 Certification Body to Systems of mechanically system 2+ fastened flexible roof waterproofing membranes (1/1)

Annex V - Product 98/213/EC ETAG 003 Certification Body Internal partition kits (1/5 (AVCP) System 1

Annex V - FPC 98/279/EC ETAG 004 Version 08/2011 Certification Body to Non-load bearing ETAG 009 system 2+ permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and sometimes, concrete (1/1)

Assessment Manager: JJ Page 27 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - Product 98/279/EC ETAG 004 Version 08/2011 Regulation 2011 Certification Body Non-load bearing ETAG 009 (retained EU law EUR (AVCP) permanent shutterings: 305/2011) as amended System 1 kits/systems based on by the Construction hollow blocks or panels of Products (Amendment insulating materials and etc.) (EU Exit) sometimes, concrete (1/1) Regulations 2019 and the Construction Products (Amendment Annex V - Product 98/456/EC ETAG 013 etc.) (EU Exit) Certification Body Post-tensioning kits for Regulations 2020. (AVCP) the prestressing of (cont’d) System 1+ structures (1/1)

Annex V - Product 98/599/EC ETAG 005 Certification Body Liquid applied roof (AVCP) waterproofing kits (3/3) System 1

Annex V - Product 98/600/EC ETAG 010 Certification Body Self-supporting (AVCP) translucent roof kits System 1 (except glass-based kits) (3/3)

Annex V - FPC 99/89/EC ETAG 008 Certification Body to Prefabricated stair kits system 2+ (1/2)

Annex V - Product 99/89/EC ETAG 008 Certification Body Prefabricated stair kits (AVCP) (2/2) System 1

Assessment Manager: JJ Page 28 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - Product 99/91/EC EN 13162:2008 Regulation 2011 Certification Body Thermal insulating EN 13162:2012 (retained EU law EUR (AVCP) products (2/2) EN 13163:2008 305/2011) as amended System 1 EN 13163:2012 by the Construction EN 13164:2008 Products (Amendment EN 13164:2012 etc.) (EU Exit) EN 13165:2008 Regulations 2019 and EN 13165:2012 the Construction EN 13166:2008 Products (Amendment EN 13166:2012 etc.) (EU Exit) EN 13167:2008 Regulations 2020. EN 13167:2012 (cont’d) EN 13168:2008 EN 13168:2012 EN 13169:2008 EN 13169:2012

Annex V - Product 99/91/EC EN 13170:2008 Certification Body Thermal insulating EN 13170:2012 (AVCP) products (2/2) EN 13171:2008 System 1 EN 13171:2012

Annex V - Product 99/92/EC ETAG 011 Certification Body Light composite wood- (AVCP) based beams and System 1 columns (1/1)

Assessment Manager: JJ Page 29 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - Product 99/93/EC EN 1125:2008 Regulation 2011 Certification Body Doors, windows, shutters, EN 1154:1996/A1:2002 (retained EU law EUR (AVCP) blinds, gates and related EN 305/2011) as amended System 1 building hardware (1/1) 1154:1996/A1:2002/AC:2006 by the Construction EN Products (Amendment 1155:1996/A1:2002/AC:2006 etc.) (EU Exit) EN 1155:1997/A1:2002 Regulations 2019 and EN 1158:1997/A1:2002 the Construction EN Products (Amendment 1158:1997/A1:2002/AC:2006 etc.) (EU Exit) EN 12209:2003 Regulations 2020. EN 12209:2003/AC:2005 (cont’d) EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003

Annex V - Product 99/454/EC EAD 350141-00-1106 Certification Body Fire stopping, fire sealing (AVCP) and fire protection System 1 products (1/2)

Annex V - Product 99/454/EC EAD 350141-00-1106 Certification Body Fire stopping, fire sealing (AVCP) and fire protective System 1 products (2/2)

Annex V - Product 99/455/EC ETAG 007 Certification Body Timber frame and log ETAG 012 (AVCP) prefabricated building kits System 1 (1/1)

Annex V - Product 2000/447/EC ETAG 019 Certification Body Prefabricated wood-based (AVCP) load-bearing stressed skin System 1 panels and self- supporting composite lightweight panels (1/6)

Assessment Manager: JJ Page 30 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - Product 2000/447/EC ETAG 016 – 1 Regulation 2011 Certification Body Prefabricated wood-based ETAG 016 – 2 (retained EU law EUR (AVCP) load-bearing stressed skin ETAG 016 – 3 305/2011) as amended System 1 panels and self- ETAG 016 – 4 by the Construction supporting composite ETAG 019 Products (Amendment lightweight panels (3/6) etc.) (EU Exit) Regulations 2019 and the Construction Annex V- Product 2017/C 435/07 + EAD350140-00-1106 Products (Amendment Certification Body 99/454/EC (2017) etc.) (EU Exit) (AVCP) Fire stopping, fire sealing EAD350141-00-1106 Regulations 2020. System 1 and fire protection (2017) (cont’d) products (1/2) EAD350454-00-1106 (2017)

Assessment Manager: JJ Page 31 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products As a Technical Annex IV – TAB Product 1 Precast normal Regulation 2011 Assessment Body (TAB) Areas /lightweight/autoclaved (retained EU law EUR for developing European aerated concrete products. 305/2011) as amended Assessment Documents by the Construction 2 Doors, windows, shutters, Products (Amendment gates and related building etc.) (EU Exit) hardware. Regulations 2019 and the Construction 3 Membranes, including liquid Products (Amendment applied and kits (for water etc.) (EU Exit) and/or water vapour control) Regulations 2020. (cont’d) 4 Thermal insulation products. Composite insulating kits/systems.

7 Gypsum products.

8 Geotextiles, geomembranes, and related products.

9 Curtain walling/cladding/structural sealant glazing.

10 Fixed firefighting equipment (fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression product).

13 Structural timber products/elements and ancillaries.

14 Wood based panels and elements.

Assessment Manager: JJ Page 32 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products As a Technical Annex IV – TAB Product 15 Cement, building limes and Regulation 2011 Assessment Body (TAB) Areas other hydraulic binders. (retained EU law EUR for developing European (cont’d) 305/2011) as amended Assessment Documents 16 Reinforcing and by the Construction (cont’d) prestressing steel for concrete Products (Amendment (and ancillaries). Post etc.) (EU Exit) tensioning kits. Regulations 2019 and the Construction 17 Masonry and related Products (Amendment products. Masonry units, etc.) (EU Exit) mortars and ancillaries. Regulations 2020. (cont’d) 19 Foorings.

21 Internal & external wall and ceiling finishes. Internal partition kits.

22 Roof coverings, roof lights, roof windows, and ancillary products.

25 Construction adhesives.

26 Products related to concrete, mortar and grout.

27 Space heating appliances.

28 Pipes-tanks and ancillaries not in contact with water intended for human consumption.

30 Flat glass, profiled glass and glass block products.

31 Power, control and communication cables.

32 Sealants for joints.

Assessment Manager: JJ Page 33 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products As a Technical Annex IV – TAB Product 34 Building kits, units, and Regulation 2011 Assessment Body (TAB) Areas prefabricated elements. (retained EU law EUR for developing European (cont’d) 305/2011) as amended Assessment Documents 35 Fire stopping, fire sealing by the Construction (cont’d) and fire protective products. Products (Amendment Fire retardant products. etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)

Pressure Equipment Directive: Article 14, Portable fire extinguishers Scheme SD052 (Safety) Regulations Annex III QP2 – Series procedures 2016 Regulation 42 Components for water

and gas fire suppression Essential Health and Safety Conformity Assessment and Requirements Annex I of the Modules extinguishing systems Directive B, D, H, H1

The Merchant Directive 2014/90/EU: Fire Protection Equipment Standards pursuant to Shipping (Marine Chapter 4, Article 15 & Equipment) Annex II MED 1./3.1, 3.2, 3.9, 3.11, Regulations 2016 3.13, 3.14, 3.16 to 3.18, Implementing Acts (Article Module B: EC Type 3.22 to 3.29, 3.31 to 3.32, 35(2)) & Commission Examination 3.35 to 3.38, 3.40, 3.42 to Regulation (Article 35(5) via Module D: Production QA 3.43, 3.45 to 3.49, 3.56 Article 40 concept of Directive Module E: Product QA 2014/90/EU Module F: Product Verification

Assessment Manager: JJ Page 34 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 96/577/EC EN 54-2:1997 Regulation 2011 Certification Body Fire alarm/detection, fixed EN 54-2:1997/A1:2006 (retained EU law EUR (AVCP) fire-fighting, fire and EN 54-2:1997/AC:1999 305/2011) as amended System 1 smoke control EN 54-5:2000/A1:2002 by the Construction and explosion EN 54-5:2018/A1:2018 Products (Amendment suppression products EN 54-3:2001/A1:2002 etc.) (EU Exit) (1/1) EN 54-3:2001/A2:2006 Regulations 2019 and EN 54-4:1997 the Construction EN 54-4:1997/A1:2002 Products (Amendment EN 54-4:1997/A2:2006 etc.) (EU Exit) EN 54-4:1997/AC:1999 Regulations 2020 EN 54-7:2018 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-11:2001 EN 54-11:2001/A1:2005 EN 54-12:2002 EN 54-12:2015 EN 54-16:2008 EN 54-17:2005 EN 54-17:2005/AC:2007 EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-21:2006 EN 54-23:2010 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012 EN 671-1:2001 EN 671-1:2001/AC:2002 EN 671-1:2012 EN 671-2: 2001 EN 671-2:2001/A1:2004 EN 671-2:2012 EN 15650:2010

Assessment Manager: JJ Page 35 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 96/577/EC EN 12094-1:2003 Regulation 2011 Certification Body Fire alarm/detection, fixed EN 12094-2:2003 (retained EU law EUR (AVCP) fire-fighting, fire and EN 12094-3:2003 305/2011) as amended System 1 smoke control EN 12094-4:2004 by the Construction (cont’d) and explosion EN 12094-5:2006 Products (Amendment suppression products EN 12094-6:2006 etc.) (EU Exit) (1/1) EN 12094-7:2000 Regulations 2019 and (cont’d) EN 12094-7:2000/A1:2005 the Construction EN 12094-8:2006 Products (Amendment EN 12094-9:2003 etc.) (EU Exit) EN 12094-10:2003 Regulations 2020 EN 12094-11:2003 (cont’d) EN 12094-12:2003 EN 12094-13:2001 EN12094-13:2001/AC:2002 EN 12101-2:2003 EN 12101-3:2015 EN 12101-7:2011 EN 12101-8:2011 EN 12259-1:1999 +A1:2001 EN 12259- 1:1999+A1:01/A2:04 EN 12259- 1:1999+A1:01/A3:06 EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002 EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005 EN 12259-4:2000/A1:2001 EN 12259-5:2002 EN 14604:2005 EN 14604:2005/AC:2008

Assessment Manager: JJ Page 36 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V- Product 2017/C 435/07 + EAD350140-00-1106 Regulation 2011 Certification Body 99/454/EC (2017) (retained EU law EUR (AVCP) Fire stopping, fire sealing EAD350141-00-1106 305/2011) as amended System 1 and fire protection (2017) by the Construction products (2/2) EAD350454-00-1106 Products (Amendment (2017) etc.) (EU Exit) Regulations 2019 and the Construction Annex V- Product 2017/C 435/07 + EAD 350402-00-1106 (2017) Products (Amendment Certification Body 99/454/EC etc.) (EU Exit) (AVCP) Fire stopping, fire sealing Regulations 2020 System 1 and fire protection (cont’d) products (1/2)

Annex V- Product 2017/C 435/07 + EAD 078-00-1106 (2017) Certification Body 99/454/EC (AVCP) Fire stopping, fire sealing System 1 and fire protection products (2/2)

Assessment Manager: JJ Page 37 of 47

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines -u po n - Thames, TW18 3HR, UK

BRE Global Limited 0007 Issue No: 092 Issue date: 05 May 2021 Accredited to ISO/IEC17065:2012 to provide product conformity certification

Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5

Conformity Assessment Category of products or Essential requirements: Directive / Regulation procedure/ individual products Product specification / Module/article Properties/Standards

Construction Products Annex V - FPC 96/581/EC EN 13249:2000 Regulation 2011 certification body to Geotextiles (1/2) EN 13249:2000/A1:2005 (retained EU law EUR system 2+ EN 13250:2000 305/2011) as amended EN 13250:2000/A1:2005 by the Construction EN 13251:2000 Products (Amendment EN 13251:2000/A1:2005 etc.) (EU Exit) EN 13252:2000 Regulations 2019 and EN 13252:2000/A1:2005 the Construction EN 13253:2000 Products (Amendment EN 13253:2000/A1:2005 etc.) (EU Exit) EN 13254:2000 Regulations 2020 EN 13254:2000/A1:2005 (cont’d) EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003

Assessment Manager: JJ Page 38 of 47