2017-K-Field Switching and Sensing.Indd

ase add le P

8 1 0 w 2 i r th e e b ffe m ct pte from 19th Se Field switching & sensing K

Huba Control K-1...3 Pressure transmitters Delta K-33

Pressure switches/ sensors Huba Control K-2...3 Lefoo K-32

Flow sensors Huba Control K-4

Panasonic K-5...11 Photoelectric sensors Delta K-6 MD Microdetectors K-15...17

Fiber-optic sensors Panasonic K-9...10

Mark/ colour sensors Panasonic K-11

Laser sensors/ distance measurement Panasonic K-11

Delta K-12 Proximity switches MD Microdetectors K-13...14 Aeco K-19...20

Ultrasonic sensors MD Microdetectors K-18

Vibration/ Inclination sensors MD Microdetectors K-18

Sensor connectors and cables Signal K-21

EM K22 Micro/ limit switches Ersce K-23...24 Lovato K-25...26

Matic K-27...28 Float/ ﬂow switches EM K-29...30 Lefoo K-32

Fuel level sensors/ indicators EM K-31

Smoke detectors Horing Lih K-34

Safety light curtains/ controllers Reer K-35 Pressure transmitters made in Switzerland

Pressure transmitters/sensors (IP67) • Compact, rugged construction • Accuracy: ± 0.3 % fs • Medium temperature range: -15 … +125 °C • Response time: < 2 ms, (1 ms typical) • Material: Connection Stainless steel 1.4404 / AISI 316L • Conformity: EN 61326-2-3 / IEC 68-2-27 / IEC 68-2-29 / IEC 68-2-6 / UL E325110

pressure range power output electrical pressure new type description price (bar)1) supply DC2) connection3) connection4)

Type 525/28 compact pressure transmitter based on well proven ceramic technology developed by Huba Control. These transmitters are suitable for applications across a broad spectrum of industries. • Medium: Liquids and gases Type 528 pressure range: -1 … 0 - 60 BAR Ø 24 x 40.9 mm 528.9120033411 0 ... 1.6 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9330033411 528.9140033411 0 ... 2.5 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9150033411 0 ... 4 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9170033411 0 ... 6 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9300033411 0 ... 10 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9310033411 0 ... 16 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9320033411 0 ... 25 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9330033411 0 ... 40 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 528.9400033411 0 ... 60 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1362.00 Type 525 low pressure range: 0 … 0.05 - 0.6 BAR Ø 26.5 x 46.4 mm 525.9230033111 0 …0.16 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2808.00 525.9240033111 0 …0.20 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2808.00 525.9260033111 0 …0.30 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2808.00 525.9270033111 0 …0.40 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2808.00 525.9280033111 0 …0.60 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2808.00 Type 520 pressure range: 0 - 1000 BAR Ø 24 x 46.7 mm Huba Control developed thick film technology with fully welded pressure measurement cell. Meets high burst protection demands. Ideal for refrigeration applications including ammonia. • Welded without sealing parts (no elastomer seals) • Medium: Liquids, gases and refrigerants (including ammonia) 520.917S033401 520.906S033401 -1 ... 9 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.917S033401 0 ... 6 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.930S033401 0 ... 10 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.931S033401 0 ... 16 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.932S033401 0 ... 25 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.933S033401 0 ... 40 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.940S033401 0 ... 60 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1489.00 520.941S033401 0 ... 100 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1821.00 520.942S033401 0 ... 160 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1821.00 520.943S033401 0 ... 250 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1821.00 520.954S033401 0 ... 400 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1821.00 520.955S033401 0 ... 600 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 1821.00 Explosion proof version EC type examination certificate: SEV 10 ATEX 0145 • Intrinsic safety: Ex II 1/2 G Ex ia IIC T4 Ga/Gb / Ex II 1/2 D Ex ia IIC T125°C Da/Db

520.917S043401 0 ... 6 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2340.00 SGN01024-373 520.930S043401 0 ... 10 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2340.00 520.931S043401 0 ... 16 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2340.00 520.932S043401 0 ... 25 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2340.00 520.933S043401 0 ... 40 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2340.00 520.934S043401 0 ... 60 7 - 33 VDC 4 - 20 mA M12x1 transmitter G 1/4” 2340.00

Accessories for transmitters other connectors and cables see page K-21 SGN01024-373 M12 (4 PIN) assembly connectors for above transmitters 90° 117.00 Heat Sink for high temperature applications Heat sink effectively reduces temperatures of hot media, permitting usage of transmitters in applications with temperatures in excess of 200°C.

15074 G 1/4” heat sink for transmitters in high temperature applications (L +101 mm) 1064.00 1) Other pressure ranges available on request 2) Other outputs available on request: 0 - 5V, 0 - 10V, Radiometric 10 … 90% 15074 3) Other electrical connections available: DIN EN 175301-803-A/C, RAST2.5, Swift, M12 x 1, with cable 4) Pressure connections: inside/outside thread: ¼”-18NPT, ½”-14NPT, G¼”, G½”, M20 x 1.5, R ¼ to DIN 2999

K-1 Above prices do not include VAT. E&OE Pressure switches made in Switzerland

Mechanical pressure switches Type 604 pressure switch is used as a Δp flow switch in ventilation ducts for the control of filters and fans and in primary and secondary control systems for the control of air dampers. Ideally suited to protect heating coils from overheating and for monitoring industrial air cooling circuits.

• Easy to install, user friendly snap cover • Case geometry permits easy cable entry - cable strain relief integrated • Supplied with Combi-bracket for vertical or horizontal installation new • For ventilation and air conditioning plants (monitor differential pressure under/over pressure) • To monitor air filters and air flow

- Medium: Air and neutral gases -30 … +85 °C

- Electrical contact: 1 x changeover contact - 5A 250 VAC (resistive) Field switching & sensing - Protection class: IP54 (with cover) - Conformity: EN 61326-2-3, EN 60730-1

pressure range electrical pressure type switch description price mbar Pa connection connection

604.9000000 Type 604 mechanical pressure switch (H) 52 x (Ø) 81 • Tolerable overload on one side: 50 mbar • Pressure connection: PVC nipples - Ø 6.2 mm

604.9000000 0.2 ... 3 20 .. 300 1 ch/over screw term. pressure switch Ø 6.2 mm 468.00 604.9100000 0.5 ... 5 50 .. 500 1 ch/over screw term. pressure switch Ø 6.2 mm 468.00 604.9200000 1 ... 10 100 .. 1000 1 ch/over screw term. pressure switch Ø 6.2 mm 468.00 604.9400000 5 ... 20 500 .. 2000 1 ch/over screw term. pressure switch Ø 6.2 mm 468.00 604.9500000 10 ... 50 1000 ..5000 1 ch/over screw term. pressure switch Ø 6.2 mm 468.00 Note: Other pressure ranges available on request Accessories for type 604 above 104312 connection kit for vent duct (metal) 90° angled - including 2 m long tube 213.00 100064 connection kit for vent duct (plastic) straight - including 2 m long tube 141.00

Type 548 / 540 electronic programmable pressure switch (IP67) The type 548 / 540 μP-regulated, programmable pressure transmitter has a robust industry design, easily adjustable parameters (via function keys in the configuration menu) with up to two programmable switching points. All units are equipped with a large 4 digit display assuring reliable accurate readings.

• Compact, rugged construction • High over pressure capability

• Clearly readable display (rotatable 180°) - 7 segment LED, 4 digits for pressure and parameter values • Programmable time delay functions rise and switch off delay 0 - 50 s, response time 5 …500 ms • 1 x Analog signal output 548.9300152401 • 2 x programmable switching outputs No or NC (200 mA) • Medium: Liquids and gases -20 … +80 °C • Response time: < 5 ms • Conformity: EN 61326-2-3 / IEC 68-2-27 / IEC 68-2-6

pressure power output electrical pressure type description range (bar) supply DC connection connection

Type 548 pressure range: -1 - 0 - 40 BAR (H) 73 x (W) 41 x (D) 42 mm Type 548 pressure switch is based on the well proven ceramic technology developed by Huba Controls over 20 years.

• Accuracy: ± 0.3 % fs • Overload: ≤ 10 BAR 4 x fs

548.9300152401 0 ... 10 7 - 33 VDC 4 - 20 mA M12x1 PNP transmitter G 1/4” 3846.00 548.9320152401 0 ... 25 7 - 33 VDC 4 - 20 mA M12x1 PNP transmitter G 1/4” 3846.00 548.9330152401 0 ... 40 7 - 33 VDC 4 - 20 mA M12x1 PNP transmitter G 1/4” 3846.00

Type 540 pressure range: 0 - 600 BAR (H) 73 x (W) 41 x (D) 42 mm Type 540 compact pressure transmitter based on Huba Control developed thick film technology with fully welded pressure measurement cell.

• Accuracy: ± 0.3 % fs • Overload: 3 x fs (max. 1500 BAR)

540.941S052401 0 ... 100 7 - 33 VDC 4 - 20 mA M12x1 PNP transmitter G 1/4” 3909.00 540.943S052401 540.943S052401 0 ... 250 7 - 33 VDC 4 - 20 mA M12x1 PNP transmitter G 1/4” 3909.00 540.955S052401 0 ... 600 7 - 33 VDC 4 - 20 mA M12x1 PNP transmitter G 1/4” 3909.00 For M12 (5 pin) connectors and cables see page K-21

Above prices do not include VAT. E&OE K-2 Differential pressure transmitters made in Switzerland

Differential pressure transmitter Type 699 transmitters are available in switchable pressure ranges, with or without digital display. They include customer specific adjustment possibilities. Specially developed sensors for each pressure range ensure accurate long term stable measurement and provide the perfect platform for use in air conditioning technology. • Fast, easy mounting. (housing incorporates integral wall or ceiling mount bracket) • Adjustable measurement range • Switchable output signals new • Switchable response curve (linear or root-extracted) • Resettable Zero Point (reset button) • Full scale adjustable Application fields • Measuring slightest differential pressures in ventilation and air conditioning ducts • Check air flows • Monitor filters and fan systems • Pressure supervision in labs, production, storage and clean rooms

pressure range supply output electrical pressure type description price (mbar) VDC DC connection connection 699.931014010 Type 699 differential pressure transmitter (H) 75 x (W) 92 x (D) 47.9 mm • Medium: Air and neutral gases - temperature range: 0 … +70 °C • Response time: < 20 ms • Output: 4 … 20 mA (others available on request 0 … 5/10V) • Degree of protection: IP54 according to EN 60529 • Conformity: EN 61326-1, UL 60730-1, UL 60730-2-6 699.931014010 0.3 / 0.5 / 1 13.5 - 33 4 - 20 mA screw term. transmitter Ø 6.2 mm 1957.00 699.913014010 1 / 3 / 5 13.5 - 33 4 - 20 mA screw term. transmitter Ø 6.2 mm 1957.00 699.915014010 5 / 10 / 16 13.5 - 33 4 - 20 mA screw term. transmitter Ø 6.2 mm 1957.00 699.931011010 0.3 / 0.5 / 1 13.5 - 33 0 - 10 V screw term. transmitter Ø 6.2 mm 1957.00 699.913011010 1 / 3 / 5 13.5 - 33 0 - 10 V screw term. transmitter Ø 6.2 mm 1957.00 699.915011010 5 / 10 / 16 13.5 - 33 0 - 10 V screw term. transmitter Ø 6.2 mm 1957.00 As above with LCD Digital display 699.931024110 0.3 / 0.5 / 1 13.5 - 3 3 4 - 20 mA screw term. transmitter Ø 6.2 mm 2808.00 699.913024110 1 / 3 / 5 13.5 - 33 4 - 20 mA screw term. transmitter Ø 6.2 mm 2808.00 699.915024110 5 / 10 / 16 13.5 - 33 4 - 20 mA screw term. transmitter Ø 6.2 mm 2808.00 699.931021110 0.3 / 0.5 / 1 13.5 - 33 0 - 10 V screw term. transmitter Ø 6.2 mm 2808.00 699.913021110 1 / 3 / 5 13.5 - 33 0 - 10 V screw term. transmitter Ø 6.2 mm 2808.00 699.915021110 5 / 10 / 16 13.5 - 33 0 - 10 V screw term. transmitter Ø 6.2 mm 2808.00 Note: Other pressure ranges available on request Other outputs available on request (0 … 5/10V)

699.931024110 Accessories for type 699 above 104312 connection kit for vent duct (metal) 90° angled - including 2 m long tube 213.00 100064 connection kit for vent duct (plastic) straight - including 2 m long tube 141.00 Type 692 differential pressure sensor (H) 95 x (Ø) 44 mm Type 692 pressure transmitters feature unique, well proven ceramic technology. The wide pressure range together with several standard output signals make these transmitters ideal for applications across a broad spectrum of industries. For the measurement of pressure differentials in HVAC systems. • Compact design • High measurement accuracy • Robust stainless steel enclosure • Very low temperature sensitivity • High resistance to extreme temperatures Type 692 differential pressure transmitter • Medium: Liquids and neutral gases -15 … +85 °C • Response time: < 5 ms • Output: 4 … 20 mA (others available on request 0 … 5/10V) • Electrical connection: DIN EN 175301-803-A connector (female not supplied with transmitter) • Degree of protection: IP65 according to EN 60529 • Conformity: EN 61326-2-3

P1 P2 screw fitting

692.912007141 0 ... 1 5 11 - 33 4 - 20 mA DIN plug transmitter Ø 6 mm 6338.00 692.916007141 0 ... 2.5 12 11 - 33 4 - 20 mA DIN plug transmitter Ø 6 mm 6338.00 692.919007141 0 ... 6 12 11 - 33 4 - 20 mA DIN plug transmitter Ø 6 mm 6338.00 692.912007141 692.930007141 0 ... 10 20 11 - 33 4 - 20 mA DIN plug transmitter Ø 6 mm 6338.00 Accessories for above 692 transmitters 103510 DIN EN 175301-803-A female connector for type 692 transmitters 107.00 101999 Mounting bracket (including screws) for type 692 transmitters 162.00

K-3 Above prices do not include VAT. E&OE

Flow sensors made in Switzerland

Flow sensors Huba Control flow sensors utilise the Vortex trail principle and are available in various options. No moving parts, the flow sensor is not sensitive to debris with marginal pressure loss combined with high accuracy.

• Measuring principle: Vortex - Piezoelectric sensor element • Output: 4 … 20 mA (others available on request 0 … 10V) • Drinking water approval: KTW, W270, WRAS • Accuracy: at < 50% fs (water) < 1 % fs • Flow media: Heating water with standard additives, potable water (hot/cold) new nominal measuring power output type description connection price diameter range (l/min) supply DC Field switching & sensing Type 210/200 fibreglass-reinforced plastic PA6T/6I (40% GF) • Response time: < 500 ms • Medium temperature: -40... +125 °C • Flow pipe connection: External threaded connection G½ …G1¼” 210.906441K Type 210 Fibreglass-reinforced plastic Analog output 4 … 20 mA (0 … 10 V, Frequency square or pulse signal available on request) • Electrical connection: M12x1 (3 pin) (supplied separately) (IP65)

210.906441K DN 6 0.5 ... 10 8 - 33 VDC 4 - 20 mA flow sensor G ½” 2174.00 210.908441K DN 8 0.9 ... 15 8 - 33 VDC 4 - 20 mA flow sensor G ½” 2174.00 210.910441K DN 10 1.8 ... 32 8 - 33 VDC 4 - 20 mA flow sensor G ½” 2174.00 210.915441K DN 15 3.5 ... 50 8 - 33 VDC 4 - 20 mA flow sensor G ¾” 2174.00 210.920441K DN 20 5.0 ... 85 8 - 33 VDC 4 - 20 mA flow sensor G 1” 2223.00 210.925441K DN 25 9.0 ... 150 8 - 33 VDC 4 - 20 mA flow sensor G 1¼” 2268.00 Note: Other outputs available on request 0 - 5V, 0 - 10V, Radiom. 10 … 90% 200.908101K Above flow switches can be provided with additional internal PT1000 temperature sensor + 480.00

Type 200 OEM flow sensor Frequency Square pulse signal - < 0.1 … > 4.75 V • Electrical connection: RAST 2.5 / 2.54 connector (supplied separately) • Protection class: IP65

200.908101K DN 8 0.9 ... 15 5 VDC 0.1 - 4.75 V flow sensor G ½” 1130.00 200.910101K DN 10 1.8 ... 32 5 VDC 0.1 - 4.75 V flow sensor G ½” 1130.00 200.915101K DN 15 3.5 ... 50 5 VDC 0.1 - 4.75 V flow sensor G ¾” 1130.00 200.920101K DN 20 5.0 ... 85 5 VDC 0.1 - 4.75 V flow sensor G 1” 1177.00 200.925101K DN 25 9.0 ... 150 5 VDC 0.1 - 4.75 V flow sensor G 1¼” 1215.00 Connectors for type 200 flow switch 111668 RAST 2.5 3-pole electrical connector with cable 30 cm 137.00 200.920101K Type 230 brass bodied flow sensors Red brass / PA6T/6I • Response time: < 500 ms • Medium temperature: -40... +125 °C • Electrical connection: M12x1 (3 pin) (supplied separately) • Protection class: IP65 • Flow pipe connection: External threaded connection G¾ …G1½” Type 230 brass bodied flow sensors Analog output 4 … 20 mA (0 … 10 V available on request) 230.910441L DN 10 1.8 ... 32 8 - 33 VDC 4 - 20 mA flow sensor G ¾” 6572.00 230.915441A DN 15 3.5 ... 50 8 - 33 VDC 4 - 20 mA flow sensor G ¾” 6508.00 230.920441A DN 20 5 ... 85 8 - 33 VDC 4 - 20 mA flow sensor G 1” 6508.00 230.925441A DN 25 9 ... 150 8 - 33 VDC 4 - 20 mA flow sensor G 1¼” 6508.00 Above flow switches can be provided with additional internal PT1000 temperature sensor + 490.00 230.910441L Type 712 level sensing pressure transmitters Ø 23.4 x 116 mm Type 712 level sensing pressure transmitters are manufactured using an absolute pressure measuring cell with an adjusted and amplified sensor signal.

• Medium: Liquids (suitable for drinking water) • Accuracy: ± 0.8 % fs • Medium temperature range: -25 … +80 °C • Protection class: IP68 Cable PE-HD

712.913001210 0.0 ... 0.3 10 - 30 VDC 4 - 20 mA cable (5m) transmitter – 6015.00 712.911003210 0.0 ... 1.0 10 - 30 VDC 4 - 20 mA cable (15m) transmitter – 5402.00 712.913001210 712.912004210 0.0 ... 1.6 10 - 30 VDC 4 - 20 mA cable (20m) transmitter – 5823.00 For M12 connectors and cables see page K-21

Above prices do not include VAT. E&OE K-4 EX series (miniature) photoelectric switches

supply type PNP NPN connector price voltage diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm) EX-Z series world’s smallest sensor 12 - 24 VDC IP67 (EN60529) Ultra-minute photoelectric sensor (amplifier built-in) • Output: PNP/NPN open-collector transistor max. 20mA • LED indication: Orange (operation) / green (stability) EX-Z13FA-P Through beam (supplied as a set with transmitter and receiver) - Detects objects breaking the beam between the transmitter and the receiver Front sensing 14 x 8 x 3 mm EX-Z11FA-P 12 - 24 VDC • 50 • • cable 2019.00 EX-Z11FB-P 12 - 24 VDC • 50 • • cable 2019.00 EX-Z12FA-P 12 - 24 VDC • 200 • • cable 2019.00 EX-Z12FB-P 12 - 24 VDC • 200 • • cable 2019.00 EX-Z13FA-P 12 - 24 VDC • 500 • • cable 2019.00 EX-Z13FB-P 12 - 24 VDC • 500 • • cable 2019.00 Side sensing 15.5 x 5.5 x 6.5 mm EX-Z11A-P 12 - 24 VDC 50 cable 2019.00 EX-Z13A-P • • • EX-Z11B-P 12 - 24 VDC • 50 • • cable 2019.00 EX-Z12A-P 12 - 24 VDC • 200 • • cable 2019.00 EX-Z12B-P 12 - 24 VDC • 200 • • cable 2019.00 EX-Z13A-P 12 - 24 VDC • 500 • • cable 2019.00 EX-Z13B-P 12 - 24 VDC • 500 • • cable 2019.00 Accessories for above EX-Z sensors sensor MS-EXZ-1 L-shaped mounting bracket for front and side sensing EX-Z 77.00 EX-20 series miniature sensor 12 - 24 VDC IP67 (EN60529) • Output: PNP open-collector transistor max. 50mA • LED indication: Orange (operation) / green (stability) Diffuse reflective proximity type detection (no transmitter or reflector required) - Photo switch transmits a beam which is reflected back from a detected object EX-22B-PN Side sensing 25 x 12.3 x 8.2 mm EX-22A-PN* 12 - 24 VDC • 160 • • cable 1714.00 EX-22B-PN* 12 - 24 VDC • 160 • • cable 1714.00 Retro-reflective (supplied with RF200 reflector) - Photo switch transmits a beam which is reflected back by a reflector EX-29A-PN* 12 - 24 VDC • 200 • • cable 2037.00 EX-29B-PN* 12 - 24 VDC • 200 • • cable 2037.00 Through beam (supplied as a set with transmitter and receiver) 22 x 10.5 x 8.2 mm - Detects objects breaking the beam between the transmitter and the receiver EX-23-PN* 12 - 24 VDC • 2 met • • • cable 2256.00 Accessories for above photo switches MSEX202 metallic right angled sensor mounting bracket 20 series 86.00 EX-30 series threaded miniature “sensor in a screw” IP67 (EN60529) EX-29B-PN • Alternative to fibre sensors • Output: PNP open-collector transistor max. 50mA • LED indication: Orange (operation) / green (stability) • Dimensions: 15.6 x 14 x 18 mm (mounting: diffused M6, through-beam M4) Diffuse reflective proximity type detection (no transmitter or refector) M6 mounting - Photo switch transmits a beam which is reflected back from a detected object EX-32A-PN* 12 - 24 VDC • 50 • • cable 1528.00 EX-32B-PN* 12 - 24 VDC • 50 • • cable 1528.00 Through beam (supplied as a set with transmitter and receiver) M4 mounting - Detects objects breaking the beam between the transmitter and the receiver EX30 EX-33-PN* 12 - 24 VDC • 800 • • • cable 2656.00 * With sensitivity adjustment NPN available on request (remove “-P” from the part number) K-5 Above prices do not include VAT. E&OE Photoelectric switches (cylindrical)

supply type PNP NPN connector price voltage diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm)

CY-100 series M18 axial beam 12 - 24 VDC M12 - 4-pin connector • Protection degree: IP67 (EN60529) Field switching & sensing • Supply protection: Polarity reversal, Transient, Short circuit new • LED indication: Power and Operation indication • Connection: M12 - 4-pin connector • Housing material: PBT (housing), PMMA (lens) • Dimensions: Ø 18 mm x 60 mm • Ambient limits: - 25 x 55ºC

CY-121B-P-Z Diffuse reflective proximity type detection (no transmitter or reflector required) – Photo switch transmits a beam which is reflected back from a detected object CY-121A-P-Z 12 - 24 VDC • 100 • • M12 457.00 CY-121B-P-Z 12 -24 VDC • 100 • • M12 457.00 CY-122A-P-Z* 12 - 24 VDC • 600 • • M12 792.00 CY-122B-P-Z* 12 - 24 VDC • 600 • • M12 792.00 * With sensitivity adjustment Retro-reflective used together with a reflector (supplied separately) – Photo switch transmits a beam which is reflected back by a reflector CY-192A-P-Z 12 - 24 VDC • 4 met • • M12 470.00 CY-192B-P-Z 12 - 24 VDC • 4 met • • M12 470.00

Retro-reflective (polarised) used together with a reflector (supplied separately) – Transmitted beam is only received by reflector (unaffected by reflection from shiny surfaces) CY-191A-P-Z CY-191A-P-Z 12 - 24 VDC • 2 met • • M12 753.00 CY-191B-P-Z 12 - 24 VDC • 2 met • • M12 753.00

Thru-beam (long range) supplied as a set with transmitter and receiver – Detects objects breaking the beam between the transmitter and the receiver CY-111A-P-Z 12 - 24 VDC • 15 met • • M12 872.00 CY-111B-P-Z 12 - 24 VDC • 15 met • • M12 872.00 Note: NPN available on request (remove “-P” from the part number)

Accessories for above cylindrical photo switches Cable and connectors IP67/68 SGN01021-373 M12 4 pin assembly connector with screw terminals straight 117.00 SGN01021-373 SGN01024-373 M12 4 pin assembly connector with screw terminals 90° angled 117.00

SGN01005-373 M12 4 pin PUR cable and connector (2 meters) straight 143.00 SGN01006-373 M12 4 pin PUR cable and connector (5 meters) straight 178.00 SGN01007-373 M12 4 pin PUR cable and connector (2 meters) 90° angled 143.00 SGN01008-373 M12 4 pin PUR cable and connector (5 meters) 90° angled 178.00

Mounting brackets MS-CY1-1 metallic right angled sensor mounting bracket 59.00 MS-CY1-2 adjustable (15°) right angled sensor mounting bracket 133.00

Reflectors for retro-reflective sensors RF-410 24 x 21 mm surface mounting reflector for photo switches 44.00 RF-420 50 x 47 mm surface mounting reflector for photo switches 44.00

SGN01007-373

Above prices do not include VAT. E&OE K-6 PM series (miniature) photoelectric switches

Photo switches transmit a beam which is reflected back from a detected object (diffused) or from a reflector (retro-reflective) or can be used with a separate transmitter and receiver (through-beam) typically used for longer distance sensing. new supply type PNP NPN connector price voltage diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm)

PM-K45P PM series U type miniature sensor 5-24VDC IP64 (EN60529) • Output: PNP/NPN open-collector transistor max. 50mA • LED indication: Orange (light received) • Housing material: PBT • Dimensions: Ø 18 mm x 60 mm • Cable connection (1 meter)

Thru U beam detects objects breaking the beam between the U beam shape PM-K45P 5 - 24 VDC • 6 • • • K type 293.00 PM-T45P 5 - 24 VDC • 6 • • • T type 293.00 PM-L45P 5 - 24 VDC • 6 • • • L type 293.00

PM-L45P PM-2 convergent reflection sensing miniature sensor IP67 (EN60529) • Output: NPN open-collector transistor max. 50mA • LED indication: Orange (operation) / green (stability) • Housing material: Polyethlene terephthalate

Convergent reflective proximity type detection (no transmitter or reflector required) – Transmits a beam which is reflected back from a detected object (convergent point: 5 mm)

Top sensing 25 x 26 x 8.4 mm PM2-LH10 5 - 24 VDC • 2.5 - 8 • • solder 626.00 PM2-LH10B 5 - 24 VDC • 2.5 - 8 • • solder 626.00 Front sensing 25 x 26 x 8.4 mm PM2-LH10 PM2-LF10 5 - 24 VDC • 2.5 - 8 • • solder 626.00 PM2-LF10B 5 - 24 VDC • 2.5 - 8 • • solder 626.00 Accessories for above PM2 sensors CN-13 plug-in connector (solder terminal) for PM2 sensors PM2 21.00

CX-400 series standard compact sensors M8 - 4-pin connector CX-400 series has a high level of basic functionality and excellent cost performance. Moreover, a wide number of variations offering a sensor to fit all needs.

• Selectable: Light-ON or Dark-ON • LED indication: Red: (output ON) Green: (stable light received) • Dimensions: 31 x 11.2 x 20 mm

Diffuse reflective proximity type detection (no transmitter or reflector required) CX-421-P-Z 12 - 24 VDC • 300 • • • M8 plug 1312.00 Retro-reflective used together with a reflector (supplied separately) CX-491-P-Z* 12 - 24 VDC • 3 met • • • M8 plug 1410.00 CX-493-P-Z 12 - 24 VDC • 5 met • • • M8 plug 1410.00 CX-483-P-ZO 12 - 24 VDC • 1 met • • • M8 plug 2347.00 * With polarizing filter O For sensing transparent objects - adjustable sensing range CX-493-P-Z Thru-beam (long range) supplied as a set with transmitter and receiver CX-411-P-Z 12 - 24 VDC • 10 met • • • M8 plug 1541.00 CX-413-P-Z 12 - 24 VDC • 30 met • • • M8 plug 1983.00 Accessories for all CX-400 sensors ASM08AF03001 M8 4 pin assembly connector with screw terminals straight 110.00 SGN01013-373 M8 4 pin PUR cable and connector (2 meters) straight 123.00 SGN01014-373 M8 4 pin PUR cable and connector (5 meters) straight 150.00 SGN01015-373 M8 4 pin PUR cable and connector (2 meters) 90° angled 123.00 SGN01016-373 M8 4 pin PUR cable and connector (5 meters) 90° angled 150.00 RF-210 rectangular reflector 12.8 x 33.3 mm for retro-reflective sensors CX4… 195.00 RF-220 standard reflector 42.3 x 35.3 mm for retro-reflective sensors CX4… 144.00 RF-230 standard reflector 59.3 x 50.3 mm for retro-reflective sensors CX4… 144.00 MSCX21 L shaped metallic mounting bracket for sensor CX4… 53.00

K-7 Above prices do not include VAT. E&OE Photoelectric triangulation sensors

Due to their advanced optical system, Triangulation sensors are not effected by variances in the targets angle or colour. Due to the 2-segment photo-diode adjustable range system, the sensor does not detect objects outside the preset sensing distance.

• Unaffected by colour, material or background • BGS background suppression (or) FGS foreground suppression • Long sensing range (adjustable via 2-turn mechanical adjuster) • Improved detectability even when lens is contaminated by dirt, dust, mist or smoke • Compact dimensions

new supply

type PNP NPN connector price Field switching & sensing voltage diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm) CX-400 series compact sensors IP67 (EN60529) M8 - 4-pin connector CX-400 series has a high level of basic functionality with excellent cost performance.

CX-442-P-Z • Sensitivity: Adjustable (2 turn mechanical adjuster) • Selectable: Light-ON or Dark-ON • LED indication: Red: (output ON) Green: (stable light received) • Dimensions: 31 x 11.2 x 20 mm

Triangulation sensing for high precision detection and repeatability CX-441-P-Z 12 - 24 VDC • 50 • • • M8 plug 1965.00 CX-444-P-Z 12 - 24 VDC • 100 • • • M8 plug 1965.00 CX-442-P-Z 12 - 24 VDC • 300 • • • M8 plug 1965.00 Note: Accessories for above photo switches see previous page

EQ-30 series IP67 (EN60529) M12 - 4-pin connector Featuring a 2-segment photodiode as receiving element with unique circuitry, they detect objects at the same distance regardless of colour or background beyond the adjusted sensing range.

• Sensitivity: Adjustable (2 turn mechanical adjuster) • Selectable: Light-ON or Dark-ON • LED indication: Red: (output ON) Green: (stable light received) • Dimensions: 68 x 20 x 40 mm

Triangulation sensing for high precision detection and repeatability EQ-34 10 - 30 VDC • 2 met • • • M12 plug 2438.00 EQ-34-PN 10 - 30 VDC • 2 met • • • M12 plug 2438.00 Accessories for above photo switches EQ-34 SGN01021-373 M12 4 pin assembly connector with screw terminals straight 117.00 SGN01024-373 M12 4 pin assembly connector with screw terminals 90° angled 117.00

MS-EQ31 metallic right angled rear mounting bracket EQ-34 101.00 MS-EQ32 metallic right angled foot mounting bracket EQ-34 101.00

EQ-500 series IP67 (EN60529) convenient screw terminal block Featuring a 2-segment photodiode as receiving element with unique circuitry, they detect objects at the same distance regardless of colour or background beyond the adjusted sensing range.

• Multi-voltage: 24 - 240 VAC / 12 - 240 VDC • Relay output: 3A 250V - selectable: Detection-ON or Detection-OFF • Sensitivity: Adjustable (2 turn mechanical adjuster) • Timing function: 0.1 - 5s ON/OFF delay, one shot (selectable) “T” version only • LED indication: Red: (output ON) Green: (stable light received) • Dimensions: 68 x 26 x 68 mm

Triangulation sensing for high precision detection and repeatability EQ-501 24 - 240 VAC/DC • 2.5 met • • screw term. 2838.00 EQ-501T 24 - 240 VAC/DC • 2.5 met • • screw term. 3365.00 EQ-501 Mounting brackets MS-EQ501 metallic right angled foot mounting bracket EQ-500 95.00

Above prices do not include VAT. E&OE K-8 NX5 series photoelectric switches

supply type PNP NPN connector price

voltage max. diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm) Photoelectric sensors IP66 (EN60529) 2 meter cable connection NX5 series (rectangular) multi-voltage • Multi-voltage: 24 - 240 VAC / 12 - 240 VDC • Sensitivity: Continuously adjustable • Relay output: 1A 250 VAC (hermetically sealed) new • LED indication: Red: (power ON) Green: (stable light received) • Dimensions: 62 x 18 x 35 mm

Diffuse reflective proximity type detection (no transmitter or reflector required) NX5-D700A 24 - 240 VAC/DC • 700 • cable 1528.00 NX5-D700B 24 - 240 VAC/DC • 700 • cable 1528.00

Retro-reflective used together with a reflector (supplied separately) – Photo switch transmits a beam which is reflected back by a reflector NX5-RM7A 24 - 240 VAC/DC • 7 met • cable 1665.00 NX5-RM7B 24 - 240 VAC/DC 7 met cable 1665.00 NX5-D700A • • Retro-reflective (polarised) used together with a reflector (supplied separately) – Transmited beam is only received by reflector (unaffected by reflection from shiny surfaces) NX5-PRVM5A 24 - 240 VAC/DC • 5 met • cable 1575.00 NX5-PRVM5B 24 - 240 VAC/DC • 5 met • cable 1575.00

Thru-beam supplied as a set with transmitter and receiver – Detects objects breaking the beam between the transmitter and the receiver NX5-M10RA 24 -240 VAC/DC • 10 met • cable 1665.00 NX5-M10RB 24 - 240 VAC/DC • 10 met • cable 1665.00 NX5-M30A 24 - 240 VAC/DC • 30 met • cable 2383.00 NX5-M30B 24 - 240 VAC/DC • 30 met • cable 2383.00 Accessories for above NX5 photo switches Mounting brackets MS-NX5-1 metallic right angled foot mounting bracket for NX5 retro-reflective sensors 57.00 MS-NX5-3 metallic right angled rear mounting bracket for NX5 retro-reflective sensors 57.00

Reflectors for retro-reflective sensors RF-230 standard reflector 59 x 50.3 mm for retro-reflective sensors 144.00

Fibre-optic sensors Fibre-optic amplifiers transmit and receive signal via an attached fibre-optic cable with an optic sensor on the end. The fibre sensor determines the type of sensing as well as the distance it can sense. Totally unaffected by any source of electrical noise.

supply type sensing distance (mm) PNP NPN connector voltage light-on dark-on

FX series fibre-optic amplifiers M8 - 4-pin connector (supplied separately) • Mounting: DIN rail mounting or side mounting with 3.2 mm screws • Sensitivity setting: 2-point teaching / Limit teaching / Full-auto teaching • Timer function: ON-delay, OFF-delay, no timer (selectable) 1 - 1000 ms • LED indication: Orange LED when output is ON / Red and Green 4 digit display • Dimensions: 32 x 9 x 66.4 mm FX102P-Z Amplifier for optical fibres FX-102P-Z 12 - 24 VDC dependant on fibre used • • • M8 plug 1777.00 Cables and M8 connectors see page K-21)

K-9 Above prices do not include VAT. E&OE Fibre optic sensors

Fibre-optic amplifiers transmit and receive their signal via an attached fibre-optic cable with an optic sensor on the end. The fibre sensor determines the type of sensing as well as the distance it can sense. Totally unaffected by any source of electrical noise.

supply type PNP NPN connector price voltage diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm) FX-551 series - advanced fibre optic amplifier DIN rail mounting Significantly improved stability and operation ease, due to industry’s top emission power. new

– 3 times higher emission power and 1.6 times longer sensing range than conventional models. Field switching & sensing – Simplified functions for improved operation ease. • Connection: Connector with cable (supplied separately) • Sensitivity setting: 2-point teaching / Limit teaching / Full-auto teaching / Manual setting • Timer function: ON-delay, OFF-delay, One shot, no timer (selectable) 0.1ms - 32sec • Dimensions: 32 x 10 x 75 mm Amplifier for optical fibres FX-551P 12 - 24 VDC dependant on fibre used • • • connector 2710.00 FX-551P Accessories for above FX551 amplifiers CN73C2 main cable with connector for above amplifier (2 meter) connector 233.00 CN73C5 main cable with connector for above amplifier (5 meter) connector 273.00 CN71C2 sub cable with connector for above amplifier (2 meter) connector 193.00

Optical fibre sensors for above amplifiers Due to the vast range of optical fibres available, we illustrate a basic range (indicated below) Vast range of available optical fibre sensors available, request fibre guide, available as a PDF file

max. sensing supply distance(mm) fibre type voltage FX551 length diffused FX102 hyper head type through-beam retro-reflective polarised retro mode cuttable fibre Reflective types proximity type detection (no transmitter or reflector required) Cylindrical threaded body (straight) (IP67) FD-31 M3 • 140 750 yes cylindrical 2 met 870.00 FD-41 M4 • 140 750 yes cylindrical 2 met 870.00 FD-61 M6 • 410 1630 yes cylindrical 2 met 870.00 Square threaded body (right angled) FD-R32G M3 • 150 1150 yes square 2 met 1432.00 FD-R42G M4 • 170 1150 yes square 2 met 1432.00 Reflective types Protective tube (for FD series reflective fibres) FDPN500 M4 non-corrosive stainless steel protective tube for 0.5 met 410.00 FDPN1000 M4 non-corrosive stainless steel protective tube for 1.0 met 472.00 FDPN1500 M4 non-corrosive stainless steel protective tube for 1.5 met 539.00 Thru-beam types supplied as a set with transmitter and receiver Cylindrical threaded body (straight) FT-31 M3 • 340 1580 yes cylindrical 2 met 870.00 FT-42 M4 • 800 3600 yes cylindrical 2 met 786.00 Square threaded body (right angled) FT-R31 M3 • 340 1670 yes square 2 met 1621.00 FT-R43 M4 • 640 3600 yes square 2 met 1432.00 High temperature fibres FT-H20-W-M1 +200°C • 300 1450 no cylindrical 1 met 5347.00 FT-H35-M2S6 +350°C • 490 2400 no cylindrical 2 met 7875.00 Thru-beam types Expansion lenses (for thru-beam type fibres) -60 to +350°C For fibers: FT-42/43, FT-H20W-M1, FT-H35-M2S6 FX-LE1 M4 fibre expansion lens side view 90° beam axis FT-42/43 206.00 FX-SV1 M4 fibre expansion lens (5 times increased sensing) FT-42/43 333.00 Protective tube (for FT series thru-beam fibres) FTP500 M4 non-corrosive stainless steel protective tube for 0.5 met 410.00 FTP1000 M4 non-corrosive stainless steel protective tube for 1.0 met 472.00 FTP1500 M4 non-corrosive stainless steel protective tube for 1.5 met 539.00 Fibre accessories FXCT1 fibre cutting tool (to cut fibres to desired length) 42.00

Above prices do not include VAT. E&OE K-10 Mark and colour sensors

The LX-100 mark sensor detects any marking or colour, the sensor is equipped with red, green and blue LED In addition, it utilises a coaxial reflective optics system to realise high precision sensing when used with 1/4000 resolution 12-bit A/D converter.

supply type PNP NPN connector price voltage diffused sensing light-on dark-on through-beam retro-reflective polarised retro distance (mm) LX-100 series mark/colour sensor 12 - 24 VDC can detect any mark • Sensing: 3 LEDs: red, green, blue • Sensing modes: 2 (selectable): Mark mode and Colour mode • Sensitivity: 2-level teaching/Limit teaching - Mark / 1-level teaching - colour new • LED indication: 4-digit red LED display and various LED indicators • Dimensions: 35 x 24 x 57 mm Mark/Color sensor M12 - 4-pin connector (supplied separately) LX-101-P-Z 12 - 24 VDC digital mark detector • • • M12 plug 7875.00 Accessories for above mark sensor Cable and connectors IP67/68 SGN01021-373 M12 4 pin assembly connector with screw terminals straight 117.00 SGN01024-373 M12 4 pin assembly connector with screw terminals 90° angled 117.00

LX-101-P-Z SGN01005-373 M12 4 pin PUR cable and connector (2 meters) straight 143.00 SGN01006-373 M12 4 pin PUR cable and connector (5 meters) straight 178.00 SGN01007-373 M12 4 pin PUR cable and connector (2 meters) 90° angled 143.00 SGN01008-373 M12 4 pin PUR cable and connector (5 meters) 90° angled 178.00 MSLX1 metallic (side mount) mounting bracket for above LX-101 397.00 Laser sensors Miniature laser sensor Due to the customised IC and optical design, high precision detection is fulfilled with directivity and visibility achievable only by laser. Class 1 (IEC / JIS / FDA) laser is safe to use, no need to separate the area of sensor usage. EX-L200 series laser sensor 12 - 24 VDC minute object detection • Sensing: Minute object detection (high precision - high accuracy) • Easy beam-axis alignment Visible beam • Sensitivity: Adjustable (to eliminate background detection) • Supply protection: Short-Circuit / inverse polarity protection • LED indication: Orange and green LED indicators • Dimensions: 29.9 x 8.2 x 13 mm Laser sensor (ultra compact) - amplifier integrated Spot reflective type (Ø1 mm at a sensing distance of 300 mm) – Minimum sensing object - 0.01 mm EX-L221-P 12 - 24 VDC • 300 • • • cable 4165.00 EX-L221-P Thru-beam supplied as a set with transmitter and receiver – Minimum sensing object - 0.03 mm EX-L211-P 12 - 24 VDC • 1 met • • • cable 4311.00 Note NPN available on request (remove “-P” from the part number) MS-EX20-1 L shaped metallic mounting bracket for sensor EX-L2… 86.00 HG-C micro laser distance/measurement sensor (with built-in amplifier) HG-C measurement sensors measure and indicate measured values in mm as well as analog voltage outputs. The data can be used for various calculations and storage (logging) when the output is sent to a PLC + analog unit. • Reliable detection in 10 μm precision (for HG-C1030) • Indicates real measurements • Equipped with 0-5V analog output • Dimensions 44 x 20 x 25 mm

supply type PNP NPN connector (mm) range

voltage center distance repeatability measurement measurement HG-C1030-P 12 - 24 VDC 10 μm 30 ±5 • cable 7512.00 HG-C1050-P 12 - 24 VDC 30 μm 50 ±15 • cable 7512.00 HG-C1100-P 12 - 24 VDC 70 μm 100 ±35 • cable 7512.00 HG-C1200-P 12 - 24 VDC 200 μm 200 ±80 • cable 8421.00 HG-C1050-P HG-C1400-P 12 - 24 VDC 300 μm 400 ±200 • cable 9839.00 Note NPN available on request (remove “-P” from the part number)

K-11 Above prices do not include VAT. E&OE Photoelectric / Proximity sensors DC supply

Photo sensors transmit a beam which is reflected back from a detected object (diffused) or from a reflector (retro-reflective) or can be used with a separate transmitter and receiver (through beam) typically used for longer distance sensing. new Photoelectric sensors • Ambient limits: -25 - +55°C • Supply protection: Polarity reversal, impulse overvoltage, over current, short circuit

Max. supply type sensing PNP NPN connector price voltage diffused light-on distance (mm) dark-on through-beam retro-reflective Field switching & sensing

PS-FR2-NDB2 PSF series flat sensor IP67 (EN60529) 30 x 16 x 6.8 mm • Sensitivity: Fixed

Diffuse reflective proximity type detection (no transmitter or reflector required) PS-FR2-PLB2 12 - 24 VDC • 5 - 50 • • cable 845.00 PS-FR2-NLB2 12 - 24 VDC • 5 - 50 • • cable 845.00 PS-FR2-PDB2 12 - 24 VDC • 5 - 50 • • cable 845.00 PS-FR2-NDB2 12 - 24 VDC • 5 - 50 • • cable 845.00 Retro-reflective used together with a reflector (supplied with sensor) PS-FL3-PLB2 12 - 24 VDC • 1000 • • cable 1218.00 PS-FL3-NLB2 12 - 24 VDC • 1000 • • cable 1218.00 PS-FL3-PDB2 12 - 24 VDC • 1000 • • cable 1218.00 PS-FL3-NDB2 12 - 24 VDC • 1000 • • cable 1218.00 PS-R series rectangular sensor IP67 (EN60529) 32.8 x 21.1 x 11.2 mm • Sensitivity: Adjustable (one-turn potentiometer)

PS-RL4-NS12 • Light-ON/Dark-ON: Selectable (rotary selector) • Mounting: Supplied complete with metallic mounting bracket

Diffuse reflective proximity type detection (no transmitter or reflector required) PS-RR3-PS12 12 - 24 VDC • 300 • • • cable 1083.00 PS-RR3-NS12 12 - 24 VDC • 300 • • • cable 1083.00 Retro-reflective used together with a reflector (supplied with sensor) PS-RL4-PS12* 12 - 24 VDC • 4.2 met • • • cable 1217.00 PS-RL4-NS12* 12 - 24 VDC • 4.2 met • • • cable 1217.00 Through beam transmitter and receiver kit PS-RT9-PS12 12 - 24 VDC • 12 met • • • cable 1289.00 PS-RT9-NS12 12 - 24 VDC • 12 met • • • cable 1289.00 IS-E1204-BPOB2 * Supplied complete with reflector 53 x 53/63 mm Inductive proximity sensor IP67 (EN60529) • Ambient limits: -25 - +70°C • Supply protection: Polarity reversal, short circuit • Housing material: Nickel-plated brass; PBT sens surface

- Standard sensors for detecting ferrous metals - Longer detection range with same dimensions - Supplied standard with cable connection IS-E1204-BPCB2

supply sensing body length / type PNP NPN NO NC

voltage flush distance (mm) thread (mm) non-flush

M12 cylindrical housing with 2 meter cable connection IS-E1204-BPOB2 12 - 24 VDC • 4 mm • • 54/35 300.00 IS-E1204-BPCB2 12 - 24 VDC • 4 mm • • 54/35 300.00 IS-E1808-BPOB2 IS-N1208-BPOB2 12 - 24 VDC • 8 mm • • 53/26 300.00 IS-N1208-BPCB2 12 - 24 VDC • 8 mm • • 53/26 300.00 M18 cylindrical housing with 2 meter cable connection IS-E1808-BPOB2 12 - 24 VDC • 8 mm • • 60/40 351.00 IS-E1808-BPCB2 12 - 24 VDC • 8 mm • • 60/40 351.00 IS-N1812-BPOB2 12 - 24 VDC • 12 mm • • 60/30 351.00 IS-N1812-BPCB2 12 - 24 VDC • 12 mm • • 60/30 351.00 IS-E1812-BPCB2 Note: NPN available (replace BP with BN)

Above prices do not include VAT. E&OE K-12 Inductive proximity sensors

Inductive sensors are used to sense metal objects and can be utilised in very difficult applications, even in the presence of oils, powders, liquids and vibration. They are commonly mounted on machine tools, textile machines, transport systems, packaging machines and all automation applications. • Protection degree: IP 67 • Ambient limits: -25 - +70°C • LED indication: Incorporated • Short circuit and polarity reversal protection

supply body type PNP NPN NO NC connector price voltage length flush non flush sensing distance

M5 standard body proximity switches (long sensing distance) AD1/AP-3A DC 10-30V 3 wire cable connection AD1/AP-3A 10 - 30 VDC • 1.5 mm • • cable 30 mm 626.00 AD1/CP-3A 10 - 30 VDC • 1.5 mm • • cable 30 mm 677.00

M8 standard body proximity switches (std sensing range)

Standard 3 wire version cable connection AE1/AP-1A 10 - 30 VDC • 1.5 mm • • cable 45 mm 364.00 AE1/CP-1A 10 - 30 VDC • 1.5 mm • • cable 45 mm 364.00 AE1/AP-2A 10 - 30 VDC • 2.5 mm • • cable 45 mm 364.00 AE1/CP-2A 10 - 30 VDC • 2.5 mm • • cable 45 mm 364.00

Long sensing range M8 plug connection (3 pin) (supplied separately see page K-21) AE1/AP-3F 10 - 30 VDC • 2 mm • • M8 plug 50 mm 471.00 AE1/AP-4F 10 - 30 VDC • 4 mm • • M8 plug 50 mm 471.00

M12 proximity switches

AE1/CP-1A Standard body 3 wire version cable connection AM1/AP-1A 10 - 30 VDC • 2 mm • • cable 50 mm 334.00 AM1/CP-1A 10 - 30 VDC • 2 mm • • cable 50 mm 334.00 AM1/AP-2A 10 - 30 VDC • 4 mm • • cable 50 mm 334.00 AM1/CP-2A 10 - 30 VDC • 4 mm • • cable 50 mm 334.00

Long sensing range M12 plug connection (4 pin) AM1/AP-3H 10 - 30 VDC • 4 mm • • M12 plug 65 mm 440.00 AM1/CP-3H 10 - 30 VDC • 4 mm • • M12 plug 65 mm 440.00 AM1/AP-4H 10 - 30 VDC • 8 mm • • M12 plug 65 mm 440.00 AM1/CP-4H 10 - 30 VDC • 8 mm • • M12 plug 65 mm 440.00 Note: For NPN version, replace the “P” with “N”

Standard body 2 wire version M12 plug connection (4 pin) AM1/A0-1H 10 - 30 VDC • 2 mm • M12 plug 75 mm 437.00 AM1/A0-2H 10 - 30 VDC • 4 mm • M12 plug 75 mm 437.00

Analog output M12 plug connection (4 pin) 1 x 0-10V & 4-20mA output PMS/0P-1H AM1/D2-5H 15 - 30 VDC • 0 - 6 mm 0-10V 4-20mA M12 plug 65 mm 2281.00

NO + NC switching M12 plug connection (4 pin) PMS/0P-1H 10 - 30 VDC • 2 mm • • • M12 plug 63 mm 470.00 PMS/0P-2H 10 - 30 VDC • 4 mm • • • M12 plug 63 mm 470.00

Decout version M12 plug connection (4 pin) NPN/PNP/NO/NC on one switch PM3/00-1H 10 - 30 VDC • 2 mm • • • • M12 plug 73 mm 688.00 PM3/00-2H 10 - 30 VDC • 4 mm • • • • M12 plug 74 mm 688.00 Cables and M8/12 connectors (see page K-21)

AC version cable connection VM2/A0-1B 20 - 253 VAC • 2 mm • cable 72 mm 722.00 VM2/C0-1B 20 - 253 VAC • 2 mm • cable 72 mm 722.00 VM2/A0-2B 20 - 253 VAC • 4 mm • cable 72 mm 722.00 VM2/C0-2B 20 - 253 VAC • 4 mm • cable 72 mm 722.00

K-13 Above prices do not include VAT. E&OE Inductive proximity sensors

supply body type PNP NPN NO NC connector price voltage length flush non flush sensing distance Field switching & sensing M18 cylindrical proximity switches Standard body 3 wire version cable connection AK1/CP-1A AK1/AP-1A 10 - 30 VDC • 5 mm • • cable 50 mm 395.00 AK1/CP-1A 10 - 30 VDC • 5 mm • • cable 50 mm 395.00 AK1/AP-2A 10 - 30 VDC • 8 mm • • cable 50 mm 395.00 AK1/CP-2A 10 - 30 VDC • 8 mm • • cable 50 mm 395.00

Standard body 4 wire version NO + NC long sensing range M12 (4pin) AK6/BP-3H 10 - 30 VDC • 8 mm • • • M12 plug 49 mm 582.00 AK6/BP-4H 10 - 30 VDC • 12 mm • • • M12 plug 49 mm 582.00

2 wire version M12 (4 pin) plug connection AK1/A0-1H 10 - 30 VDC • 5 mm • M12 plug 64 mm 502.00 AK1/A0-2H 10 - 30 VDC • 8 mm • M12 plug 64 mm 502.00

Analog output M12 (4 pin) plug connection 1 x 0-10V & 4-20mA output AK6/D2-5H 15 - 30 VDC • 0 - 10 mm 0-10V 4-20mA M12 plug 49 mm 2391.00

Decout version M12 (4 pin) plug connection NPN/PNP/NO/NC on one switch PK3/00-1H 10 - 30 VDC • 5 mm • • • • M12 plug 72 mm 750.00 PK3/00-2H 10 - 30 VDC • 8 mm • • • • M12 plug 72 mm 750.00 AC version cable connection PK3/00-1H VK2/A0-1B 20 - 253 VAC • 5 mm • cable 77 mm 688.00 VK2/C0-1B 20 - 253 VAC • 5 mm • cable 77 mm 688.00 VK2/A0-2B 20 - 253 VAC • 8 mm • cable 77 mm 688.00 VK2/C0-2B 20 - 253 VAC • 8 mm • cable 77 mm 688.00 Cables and M8/12 connectors (see page K-21)

M30 cylindrical proximity switches

Standard body 3 wire version cable connection AT1/AP-1A 10 - 30 VDC • 10 mm • • cable 60 mm 493.00 AT1/CP-1A 10 - 30 VDC • 10 mm • • cable 60 mm 493.00 AT1/AP-2A 10 - 30 VDC • 15 mm • • cable 60 mm 493.00 AT1/CP-2A 10 - 30 VDC • 15 mm • • cable 60 mm 493.00 Note: For NPN version, replace the “P” with “N”

Standard body 4 wire version NO + NC long sensing range M12 (4 pin) AT1/0P-3H 10 - 30 VDC • 15 mm • • • M12 plug 76 mm 701.00 AT1/0P-4H 10 - 30 VDC • 20 mm • • • M12 plug 76 mm 701.00

2 wire version M12 (4 pin) plug connection

AT1/CP-1A AT1/A0-1H 10 - 30 VDC • 10 mm • M12 plug 64 mm 774.00 AT1/A0-2H 10 - 30 VDC • 15 mm • M12 plug 64 mm 774.00

AC version cable connection VT2/A0-1B 20 - 253 VAC • 10 mm • cable 80 mm 938.00 VT2/C0-1B 20 - 253 VAC • 10 mm • cable 80 mm 938.00 VT2/A0-2B 20 - 253 VAC • 15 mm • cable 80 mm 938.00 VT2/C0-2B 20 - 253 VAC • 15 mm • cable 80 mm 938.00 Cables and M12 connectors (see page K-21)

Above prices do not include VAT. E&OE K-14 Photoelectric switches (cylindrical)

Photo switches transmit a beam which is reflected back from a detected object (diffused) or from a reflector (retro-reflective) or can be used with a separate transmitter and receiver (through beam) typically used for longer distance sensing. • Ambient limits: -25 - +70°C • Supply protection: Polarity reversal, transient, short circuit • Housing material: PBT (plastic) available in metal on request

FAR2/BP-0A

supply type PNP NPN NO NC connector price

voltage (mm) diffused sensing distance through-beam retro-reflective polarised retro

FA series M18 axial beam (IP67) (EN60529) Ø 18mm x 68 mm Diffuse reflection proximity type detection (no transmitter or reflector required) FAR2/BN-0A 10 - 30 VDC • 100 • • • cable 695.00 FAR2/BP-0A 10 - 30 VDC • 100 • • • cable 695.00 FAI6/BN-0A 10 - 30 VDC • 400 • • • cable 765.00 FAI6/BP-0A 10 - 30 VDC • 400 • • • cable 765.00 FAIZ/BP-0A FAI8/BN-0A* 10 - 30 VDC • 1000 • • • cable 1008.00 FAI8/BP-0A* 10 - 30 VDC • 1000 • • • cable 1008.00 Retro-reflective used together with a reflector FAIC/BN-0A 10 - 30 VDC • 4000 • • • cable 714.00 FAIC/BP-0A 10 - 30 VDC • 4000 • • • cable 714.00 Retro-reflective (polarised) used together with a reflector FARP/BN-0A 10 - 30 VDC • 3000 • • • cable 840.00 FARP/BP-0A 10 - 30 VDC • 3000 • • • cable 840.00 Through beam (receiver) requires a transmitter and receiver FAIZ/BN-0A 10 - 30 VDC • 20 met • • • cable 666.00 FAIH/00-0A FAIZ/BP-0A 10 - 30 VDC • 20 met • • • cable 666.00 FAIH/00-0A 10 - 30 VDC • 20 met (transmitter) cable 573.00 * With sensitivity adjustment MV series M18 axial beam (IP67) (EN60529) Ø 18 mm x 68 mm Diffuse reflection proximity type detection (no transmitter or reflector required) MV2/A0-0A 20 - 253 VAC • 100 • cable 1209.00 MV2/C0-0A 20 - 253 VAC • 100 • cable 1209.00 MV4/A0-0A 20 - 253 VAC • 200 • cable 1209.00 MV4/C0-0A 20 - 253 VAC • 200 • cable 1209.00 MV6/A0-0A 20 - 253 VAC • 400 • cable 1264.00 MV2/A0-0A MV6/C0-0A 20 - 253 VAC • 400 • cable 1264.00 Retro-reflective 20 - 253 VAC used together with a reflector MVC/A0-0A 20 - 253 VAC • 4 met • cable 1264.00 MVC/C0-0A 20 - 253 VAC • 4 met • cable 1264.00 Through beam (receiver) requires a transmitter and receiver MVR/A0-0A 20 - 253 VAC • 16 met • cable 1133.00 MVR/C0-0A 20 - 253 VAC • 16 met • cable 1133.00

MVE/00-0A 20 - 253 VAC • 20 met (transmitter) cable 913.00

Accessories for M18 devices

MVC/A0-0A ST 02 plastic adjustable swivel bracket for M18 photo switches 154.00 ST 18-A metal axial mounting bracket for M18 photo switches 22.00 ST 18-C metal right angled mounting bracket for M18 photo switches 29.00 ST 03 right angled beam adaptor for M18 photo switches 193.00

Reflectors for photo switches Ø (H) (W) (D) RL 103 02232510 round reflector without mounting hole 34.5 – – 7.4 103.00 RL 104 02292510 round reflector without mounting hole 46 – – 6.5 113.00 RL 110 80392510 round reflector with centre mounting hole 84 – – 7.3 122.00 RL 113G 00042510 square 2 x bottom mounting holes – 61 51 8 131.00 RL 107 03132510 square mounting holes on adjacent corners – 100 100 9 243.00 RL110 RL 112G 03312510 rectangular top and bottom centre mnt. holes – 73 19 8.2 131.00 RL 116 00082510 rectangular mnt. holes on adjacent corners – 60 40 8 159.00

K-15 Above prices do not include VAT. E&OE Photoelectric switches (rectangular) DC supply

• Sensitivity: Adjustable • Ambient limits: -25 - +70°C QMR7/0P-0F • Supply protection: Polarity reversal, impulse overvoltage, short circuit • LED indication: Yellow (output status) / green (supply present)

supply type PNP NPN NO NC connector price voltage diffused sensing Field switching & sensing through-beam retro-reflective polarised retro distance (mm)

QM series cubic sensor IP67 (EN60529) (H)12.8 x (W)21 x (D)31.2 mm Diffuse reflection proximity type detection (no transmitter or reflector required) QMR7/0N-0F 10 - 30 VDC • 400 • • • M8 plug 1304.00 QMR7/0P-0F 10 - 30 VDC • 400 • • • M8 plug 1304.00 QMR8/0N-0F 10 - 30 VDC • 1 met • • • M8 plug 1361.00 QMR8/0P-0F 10 - 30 VDC • 1 met • • • M8 plug 1361.00 QMRN/0N-0F Retro-reflective (polarised) used together with a reflector QMRN/0N-0F 10 - 30 VDC • 5 met • • • M8 plug 1451.00 QMRN/0P-0F 10 - 30 VDC • 5 met • • • M8 plug 1451.00 Retro-reflective (transparent objects) QMRL/0N-0F 10 - 30 VDC • 4 met • • • M8 plug 1711.00 QMRL/0P-0F 10 - 30 VDC • 4 met • • • M8 plug 1711.00 Through beam (transmitter and receiver kit) QMRHD/0N-0F 10 - 30 VDC • 20 met • • • M8 plug 2225.00 QMRHD/0P-0F 10 - 30 VDC • 20 met • • • M8 plug 2225.00 Cables and M8 connectors (see page K-21)

Mountiing accessories for QM sensors

ST 101 metal L vertical mounting bracket for QM photo switches 86.00

QX3/A0-1A ST 102 metal L vertical side mounting bracket for QM photo switches 86.00 ST 103 metal vertical mount with protective cover bracket for QM photo switches 210.00 ST 104 metal horizontal mount with protective cover bracket for QM photo switches 163.00

STQMO vertical/horizontal diaphragm for QM photo switches 276.00

QX series (rectangular) IP65 (EN60529) Diffuse reflection proximity type detection (no transmitter or reflector required) QX3/A0-1A 10 - 30 VDC • 300 • • • cable 1647.00 QX3/C0-1A 10 - 30 VDC • 300 • • • cable 1647.00 Retro-reflective used together with a reflector QXC/A0-1A 10 - 30 VDC • 4 met • • • cable 1680.00 QXC/C0-1A 10 - 30 VDC • 4 met • • • cable 1680.00 Through beam (receiver) requires a transmitter and receiver QXR/A0-1A QXR/A0-1A 10 - 30 VDC • 8 met • • • cable 1647.00 QXR/C0-1A 10 - 30 VDC • 8 met • • • cable 1647.00 (transmitter) QXX/00-1A 10 - 30 VDC • 8 met (transmitter) cable 1098.00

BS series (rectangular) IP65 (EN60529) (H)37 x (W) 16 x (D) 64/70 mm • Supply protection: Transient, short circuit • LED indication: Incorporated • DECOUT® output: (PNP, NPN, NO + NC on one switch)

Diffuse reflection proximity type detection (no transmitter or reflector required) BS6/00-0C 10 - 30 VDC • 400 • • • • cable 1324.00 BS8/00-0C 10 - 30 VDC • 1.6 met • • • • cable 1364.00

Retro-reflective used together with a reflector BS8/00-0C BSC/00-0C 10 - 30 VDC • 8 met • • • • cable 1324.00 Reflectors for above (see page K-15)

Above prices do not include VAT. E&OE K-16 Photoelectric switches (rectangular) AC supply

supply type PNP NPN NO NC connector price voltage diffused BV6/00-0C sensing through-beam retro-reflective polarised retro distance (mm)

BV series (rectangular) 20 - 253 VAC IP67 (EN60529) • Sensitivity: Adjustable • Supply protection: Transient protection • Dimensions: (H) 16 x (W) 37 x (D) 64/70 mm

Diffuse reflection proximity type detection (no transmitter or refector required) BV4/00-0C 20 - 253 VAC • 200 • • cable 1650.00 BV6/00-0C 20 - 253 VAC • 400 • • cable 1711.00

Retro-reflective used together with a reflector BVC/00-0C 20 - 253 VAC • 8 met • • cable 1711.00

RX series (rectangular) 20 - 60 VDC / 20 - 253 VAC IP65 (EN60529) • Sensitivity: Adjustable • Connector: M12 (4pin) plug • AC/DC supply: 20 - 60 VDC / 20 - 253 VAC RX8/00-3B • Relay output: Selectable NO or NC • Timing function: 0.1-10s ON dela y, OFF delay, one shot (selectable) • LED indication: Output state, alignment, stable signal • Supply protection: Transient (AC), over voltage (DC), short circuit • Dimensions: (H) 61 x (W) 26 x (D) 87 mm

Diffuse reflection 20 - 253 VAC proximity type detection (no transmitter or refector required) RX8/00-3B 20 - 253 VAC • 2 met • • M12 plug 1549.00

Retro-reflective used together with a reflector RXC/00-3B 20 - 253 VAC • 12 met • • M12 plug 1549.00

Retro-reflective (polarised) used together with a reflector RXP/00-3B 20 - 253 VAC • 6 met • • M12 plug 1646.00

Through beam (receiver) requires a transmitter and receiver RXR/00-3B 20 - 253 VAC • 32 met • • M12 plug 1549.00

RXE/00-3B 20 - 253 VAC • 32 met (transmitter) M12 plug 1017.00 RXC/00-3B Mounting accessories ST 80 metal wall mount mounting bracket for RX photo switches 60.00 ST 81 metal base mount mounting bracket for RX photo switches 60.00 Cables and M12 connectors (see page K-21)

BX series area sensors 10 - 26 VDC IP67 (EN60529) Area sensors are supplied with two parts - an emitter and a receiver element. The optical side is made up of an array of synchronised photo elements in order to avoid mutual interference. Ideal solution for detecting irregular shaped objects.

• Sensitivity: Adjustable (trimmer) • Connector: M12 (4pin) plug • LED indication: Green (supply) - red (alarm sync.) yellow (area stable) • Supply protection: Short circuit (auto reset) • Dimensions: (H) 120 x (W) 20 x (D) 44 mm

BX04 area sensor 4 optics - 90 mm height, 30 mm optic step (minimum detectable object 15 mm) BX04SR/0A-HB 10 - 26 VDC • 300 - 2000 • • • M12 plug 4724.00

BX10 area sensor 10 optics - 90 mm height, 10 mm optic step (minimum detectable object 5 mm) BX10SR/0A-HB 10 - 26 VDC • 300 - 2000 • • • M12 plug 6048.00 Available with 4 and 6 meter sensing distances on request BX10 Cables and M8/12 connectors (see page K-21)

K-17 Above prices do not include VAT. E&OE Ultrasonic sensors DC supply

UK series M18 cylindrical ultrasonic sensors sense in direct diffuse mode. A teach-in button is used to set working distance, output status (NO/NC) and slope of analog output and to change the function. All models are temperature compensated to ensure reliability throughout the entire detection range and are totally resin filled for applications subject to vibration offering an IP67 protection degree. Cylindrical ultrasonic sensors UK series ultrasonic sensors IP67 (EN60529) • Sensitivity: Adjustable (via external teach-in) UK6A/HP-0EUL • Ambient limits: -20 - +60°C • Supply protection: Polarity reversal, transient • LED indication: Orange (output/regulation), green (echo reception) • Housing material: PBT plastic (AISI 316L stainless steel available on request) Field switching & sensing

sensing supply type distance connector price NC NO PNP voltage NPN

(mm) 0…10V 4…20mA

UK6 ultrasonic sensor short body M18 x 60.3 mm (including connector) Digital NO/NC output M12 (4-pin) plug connector UK6A/HP-0EUL 15 - 30 VDC ultrasonic sensor 40...300 • • • M12 plug 2111.00 UK6C/HP-0EUL 15 - 30 VDC ultrasonic sensor 60...800 • • • M12 plug 2190.00 UK6D/HP-0EUL 15 - 30 VDC ultrasonic sensor 80…1200 • • • M12 plug 2481.00 UK1D/E7-0E Analog output UK6A/H1-0EUL 15 - 30 VDC ultrasonic sensor 40...300 • M12 plug 2314.00 UK6C/H1-0EUL 15 - 30 VD C ultrasonic sensor 60...800 • M12 plug 2393.00 UK6D/H1-0EUL 15 - 30 VDC ultrasonic sensor 80…1200 • M12 plug 2683.00 UK6A/H2-0EUL 15 - 30 VDC ultrasonic sensor 40...300 • M12 plug 2314.00 UK6D/H2-0EUL 15 - 30 VDC ultrasonic sensor 60...800 • M12 plug 2683.00 UK6C/H2-0EUL 15 - 30 VDC ultrasonic sensor 80…1200 • M12 plug 2393.00 UK1 ultrasonic sensors M18 x 92 mm M12 (4-pin) plug connector Analog + Digital NO/NC output UK1D/E6-0E 15 - 30 VDC ultrasonic sensor 150...1600 • • • • M12 plug 3788.00 UK1D/E7-0E 15 - 30 VDC ultrasonic sensor 150...1600 • • • • • M12 plug 3788.00 UK1F/E6-0E 15 - 30 VDC ultrasonic sensor 200...2200 • • • • M12 plug 4412.00 UK1F/E7-0E 15 - 30 VDC ultrasonic sensor 200...2200 • • • • • M12 plug 4412.00 UK1D/E7-0E UT Ultrasonic sensors M30 x 100 mm IP67 (EN60529) M12 (4-pin) plug connector • Sensitivity: Adjustable (via teach-in button) • Ambient limits: -20 - +70°C • Supply protection: Polarity reversal, transient • LED indication: Orange (output/regulation), green (echo reception) • Housing material: PBT plastic (AISI 316L stainless steel available on request) Analog + Digital NO/NC output M12 (4-pin) plug connector UT1B/E6-0EUL 10 - 30 VDC ultrasonic sensor 250...3500 • • • • M12 plug 5729.00 UT1B/E7-0EUL 15 - 30 VDC ultrasonic sensor 250...3500 • • • • • M12 plug 5729.00 UT2F/E6-0EUL* 10 - 30 VDC ultrasonic sensor 350...6000 • • • • M12 plug 7161.00 UT2F/E7-0EUL 15 - 30 VDC ultrasonic sensor 350...6000 • • • • • M12 plug 7161.00 UT1B/E6-0EUL * * Large Ø 38.8 mm front transducer Cables and M12 connectors (see page K-21) Other output combinations available on request

VBR series - vibration and inclination sensor M18 IP67 New VBR series shock and vibration sensor incorporates a MEMS 3-axis accelerometer to monitor all accelerations and vibrations. Designed to be easy to use without any special training for operators.

• Programmable operating range: ±2g, ±4g, ±8g, ±16g • Reference axis: 3 (X,Y,Z) • Frequency range: 0 … 400Hz new • Fully programmable in all its functions, thresholds, alarms and node addresses • 1 output RS485 (addressable with max 128 nodes) • 1 analogue output (programmable voltage or current) VBR1/D0-3A 24 VDC vibration sensor 2g...16g • • cable 3575.00 Mounting accessories VBR1/D0-3A ST18-S bracket M18 mounting bracket/housing for above vibration sensor 77.00 ST18-V bracket M18 metal mounting bracket for above vibration sensor 60.00

Above prices do not include VAT. E&OE K-18 Rectangular inductive proximity sensors

• Protection degree: IP67 • Ambient limits: -25 - +70°C • LED indication: Incorporated • Short circuit and polarity reversal protection

supply body type PNP NPN NO NC connector price voltage length flush non flush sensing distance

SIPA8-C2 NPN NO 8 x 8 x 40 mm rectangular body DC 6-30V 3 wire cable connection SIPA8-C2 NPN NO 6 - 30 VDC • 2 mm • • cable 40 mm 586.00 SIPA8-C2 NPN NC 6 - 30 VDC • 2 mm • • cable 40 mm 586.00 SIPA8-C2 PNP NO 6 - 30 VDC • 2 mm • • cable 40 mm 586.00 SIPA8-C2 PNP NC 6 - 30 VDC • 2 mm • • cable 40 mm 586.00

28 x 10.5 x 16 mm rectangular body (micro switch shape) DC 6-30V 3 wire cable connection SIP10-C2 NPN NO 6 - 30 VDC • 2 mm • • cable 28 mm 487.00 SIP10-C2 NPN NC 6 - 30 VDC • 2 mm • • cable 28 mm 487.00 SIP10-C2 PNP NO 6 - 30 VDC • 2 mm • • cable 28 mm 487.00 SIP10-C2 NPN NO SIP10-C2 PNP NC 6 - 30 VDC • 2 mm • • cable 28 mm 487.00

40 x 40 rectangular body DC 10-55V 4 wire terminal block SIP40-C15 NPN NO+NC 10 - 55 VDC • 15 mm • • • terminal 114 mm 868.00 SIP40-C15 PNP NO+NC 10 - 55 VDC • 15 mm • • • terminal 114 mm 868.00 SIP40-CE20 NPN NO+NC 10 - 55 VDC • 20 mm • • • terminal 114 mm 868.00 SIP40-CE20 PNP NO+NC 10 - 55 VDC • 20 mm • • • terminal 114 mm 868.00

2 wire SIP40-C15 NPN NO+NC AC 20-250V terminal block SIP40-A15 NO/NC 20 - 250 VAC • 15 mm • • terminal 114 mm 1079.00 SIP40-AE20 NO/NC 20 - 250 VAC • 20 mm • • terminal 114 mm 1079.00

80 x 80 mm square body DC 10-55V 4 wire K plug connection SIQ80-CE50 NPN NO+NC K 10 - 55 VDC • 10-60 mm • • • K plug 76 mm 1270.00 SIQ80-CE50 PNP NO+NC K 10 - 55 VDC • 10-60 mm • • • K plug 76 mm 1270.00

SIQ80-AE50 NO/NC K AC 20-250V 2 wire K plug connection SIQ80-AE50 NO/NC K 20 - 250 VAC • 10-60 mm • • K plug 114 mm 1418.00

NAMUR proximity switches (ATEX approved) Namur inductive sensors are two-wire non amplified D.C. sensors containing only the oscillator and are adapted to control an electronic amplified threshold circuit and can be utilised in hazardous areas.

M12 NAMUR

SI12-N2 SI12-N2 8.2 VDC • 2 mm • cable 41 mm 310.00 SI12-NE4 8.2 VDC • 4 mm • cable 45 mm 310.00

M18 NAMUR SI18-N5 8.2 VDC • 5 mm • cable 47 mm 337.00 SI18-NE8 8.2 VDC • 8 mm • cable 54 mm 337.00

M30 NAMUR SI30-N10 8.2 VDC • 10 mm • cable 43 mm 445.00 SI12-NE4 SI30-NE15 8.2 VDC • 15 mm • cable 58 mm 445.00

K-19 Above prices do not include VAT. E&OE Capacitive proximity sensors

Capacitive sensors are used to sense all types of materials including liquids, powders, granules and can be used for sensing or counting metallic or non metallic objects. • Adjustable sensitivity • Protection degree: IP67 • Ambient limits: -20 - +70°C • LED indication: Incorporated • Short circuit and polarity reversal protection

SC18SM-CE10 NPN supply body type PNP NPN NO NC connector price voltage mm length sensing distance flush non flush Field switching & sensing

M18 standard body DC 10-40V 4 wire cable connection

Nickelled brass body SC18SM-C5 NPN NO+NC 10 - 40 VDC • 0 - 5 • • • cable 90 mm 1101.00 SC18SM-C5 PNP NO+NC 10 - 40 VDC • 0 - 5 • • • cable 90 mm 1101.00 SC18SM-CE10 NPN NO+NC 10 - 40 VDC • 0 - 10 • • • cable 96 mm 1101.00 SC18SM-CE10 PNP SC18SM-CE10 PNP NO+NC 10 - 40 VDC • 0 - 10 • • • cable 96 mm 1101.00

AC 20-250V 2 wire cable connection SC18SM-A5 NO/NC 20 - 250 VAC • 0 - 5 • • cable 92 mm 1193.00 SC18SM-AE10 NO/NC 20 - 250 VAC • 0 - 10 • • cable 95 mm 1193.00

M30 standard body Plastic body DC 10-60V 4 wire cable connection

SC30SP-C20 NPN SC30SP-C20 NPN NO+NC 10 - 60 VDC • 0 - 20 • • • cable 101 mm 1265.00 SC30SP-C20 PNP NO+NC 10 - 60 VDC • 0 - 20 • • • cable 101 mm 1265.00 SC30SP-CE25 NPN NO+NC 10 - 60 VDC • 0 - 25 • • • cable 101 mm 1265.00 SC30SP-CE25 PNP NO+NC 10 - 60 VDC • 0 - 25 • • • cable 101 mm 1265.00

AC 20-250V 2 wire cable connection SC30SP-A20 NO/NC 20 -250 VAC • 0 - 20 • • cable 101 mm 1419.00 SC30SP-AE25 NO/NC 20 - 250 VAC • 0 - 25 • • cable 101 mm 1419.00

Nickelled brass body SC30SM-C20 NPN NO+NC 10 - 60 VDC • 0 - 20 • • • cable 101 mm 1401.00 SC30SM-C20 PNP NO+NC 10 - 60 VDC • 0 - 20 • • • cable 101 mm 1401.00 SC30SP-A20 SC30SM-CE25 NPN NO+NC 10 - 60 VDC • 0 - 25 • • • cable 101 mm 1401.00 SC30SM-CE25 PNP NO+NC 10 - 60 VDC • 0 - 25 • • • cable 101 mm 1401.00

AC 20-250V 2 wire cable connection SC30SM-A20 NO/NC 20 - 250 VAC • 0 - 20 • • cable 101 mm 1554.00 SC30SM-AE25 NO/NC 20 - 250 VAC • 0 - 25 • • cable 101 mm 1554.00

SC30SM-C20 NPN

Above prices do not include VAT. E&OE K-20 Sensor connectors and cables

M8 and M12 round sensor connectors • Termination: Screw terminal • Protection degree: IP67/68 • Contact resistance: ≥100MΩ new • Contact material; Gold plated Phosphor Brass/Bronze • Coupling screw: Nickel plated Brass • Insulation: PA66+GF

plug nominal voltage type gender pins term. description price angle current AC/DC M8 assembly connectors (A coding) ASM08AF03001 female 3 screw straight 3A 60V M8 connector 110.00

ASM08AF04001 ASM08AF04001 female 4 screw straight 3A 60V M8 connector 112.00 ASM08AM03001 male 3 screw straight 3A 30V M8 connector 107.00 ASM08AM04001 male 4 screw straight 3A 30V M8 connector 110.00

M12 assembly connectors (A coding) SGN01020-373 female 3 screw straight 4A 250V M12 connector 115.00 SGN01021-373 female 4 screw straight 4A 250V M12 connector 117.00 SGN01022-373 female 5 screw straight 4A 60V M12 connector 120.00 SGN01034-373 female 8 screw straight 2A 30V M12 connector 141.00 SGN01023-373 female 3 screw 90° 4A 250V M12 connector 115.00 SGN01024-373 female 4 screw 90° 4A 250V M12 connector 117.00 SGN01025-373 female 5 screw 90° 4A 60V M12 connector 120.00 SGN01017-373 male 3 screw straight 4A 250V M12 connector 113.00 SGN01018-373 male 4 screw straight 4A 250V M12 connector 115.00 SGN01019-373 male 5 screw straight 4A 60V M12 connector 117.00 SGN01022-373 SGN01033-373 male 8 screw straight 2A 30V M12 connector 137.00 SGN01026-373 male 3 screw 90° 4A 250V M12 connector 113.00 SGN01027-373 male 4 screw 90° 4A 250V M12 connector 115.00 SGN01028-373 male 5 screw 90° 4A 60V M12 connector 117.00

Sensor cable - PUR (polyurethane) • High flexibility, oil and abrasion resistant • Operating temperature: -25 - 85°C price type mm2 cores colour insul. material wire colours per meter

CA00142 0.34 3 black cable PUR brown-blue-black 31.00 CA00149 0.34 4 black cable PUR brown-white-blue-black 33.00 CA00148 0.34 5 black cable PUR brown-white-blue-black-grey 34.00 CA00103 0.25 8 black cable PUR pnk-red-yel-brn-wht-blu-grn-gry 38.00

Sensor cables M8/M12 (with connector on one end) • Protection degree: IP67/68 • PUR cable: High flexibility, oil and abrasion resistant plug cable type gender pins colour material description SGN01025-373 angle length M8 sensor cable with female connector (A coding) SGN01013-373 female 3 black straight PUR 2 met. M8 sensor cable 123.00 SGN01014-373 female 3 black straight PUR 5 met. M8 sensor cable 150.00 SGN01015-373 female 3 black 90° PUR 2 met. M8 sensor cable 123.00 SGN01016-373 female 3 black 90° PUR 5 met. M8 sensor cable 150.00 SGN01009-373 female 4 black straight PUR 2 met. M8 sensor cable 136.00 SGN01010-373 female 4 black straight PUR 5 met. M8 sensor cable 171.00 SGN01011-373 female 4 black 90° PUR 2 met. M8 sensor cable 136.00 SGN01012-373 female 4 black 90° PUR 5 met. M8 sensor cable 171.00 M12 sensor cable with female connector (A coding) SGN01005-373 female 4 black straight PUR 2 met. M12 sensor cable 143.00 SGN01006-373 female 4 black straight PUR 5 met. M12 sensor cable 178.00 SGN01007-373 female 4 black 90° PUR 2 met. M12 sensor cable 143.00 SGN01008-373 female 4 black 90° PUR 5 met. M12 sensor cable 178.00 SGN01001-373 female 5 black straight PUR 2 met. M12 sensor cable 190.00 SGN01002-373 female 5 black straight PUR 5 met. M12 sensor cable 252.00 SGN01003-373 female 5 black 90° PUR 2 met. M12 sensor cable 190.00 SGN01004-373 female 5 black 90° PUR 5 met. M12 sensor cable 252.00 SGN01005-373 SGN01031-373 female 8 black straight PUR 2 met. M12 sensor cable 196.00 SGN01032-373 female 8 black straight PUR 5 met. M12 sensor cable 322.00

K-21 Above prices do not include VAT. E&OE

Micro switches

Miniature snap-action micro switches • Snap-action micro switch with wiping contacts, silver alloy

current type actuator length description contacts price Ith

CMV100D CMV series snap-action micro switches 10A 250 VAC changeover • Mounting: Ø 3 mm - 22.2 x 10.3 mm apart (diagonal)

• Terminals: Fast-on 187 (4.8 x 0.5 mm) Field switching & sensing CMV105D CMV100D 10A 0 standard plunger – miniature micro switch SPDT 14.00 CMV101D 10A 1 short plain lever 35.6 mm miniature micro switch SPDT 15.40 CMV105D 10A 5 long plain lever 62.2 mm miniature micro switch SPDT 15.40 CMV104D 10A 4 short roller lever 20.1 mm miniature micro switch SPDT 16.80 CMV103D 10A 3 long roller lever 34.0 mm miniature micro switch SPDT 16.80 CMV104D 16A 250 VAC changeover CMV103D • Terminals: Fast-on 250 (6.35 x 0.8 mm)

CMV160C 16A 0 standard plunger – miniature micro switch SPDT 16.10 CMV161C 16A 1 short plain lever 35.6 mm miniature micro switch SPDT 17.70 CMV165C 16A 5 long plain lever 62.2 mm miniature micro switch SPDT 17.70 CMV164C 16A 4 short roller lever 20.1 mm miniature micro switch SPDT 19.30 CM1305 CMV163C 16A 3 long roller lever 34.0 mm miniature micro switch SPDT 19.30

KW3 series snap-action micro switches CM1307 16A 250 VAC changeover • Approvals: UL, cUL, VDE, Semko, Demko, Femko, Nemko, CE, CQC • Terminals: Fast-on 250 (6.35 x 0.8 mm)

KW3A-16Z0B 16A 0 standard plunger – miniature micro switch SPDT 27.00 KW3A-16Z3 16A 1 short plain lever 35.6 mm miniature micro switch SPDT 34.00 KW3A-16Z2 16A 5 long plain lever 59.4 mm miniature micro switch SPDT 34.00 KW3A-16Z4 16A 4 short roller lever 20.2 mm miniature micro switch SPDT 34.00 KW3A-16Z5 16A 3 long roller lever 34.0 mm miniature micro switch SPDT 37.00

CM1308 CM series standard snap-action micro switch • Mounting: Ø 4 mm - 25.4 mm apart (horizontal) • Terminals: Screw-type terminals CM1704 CM1300 15A F pin plunger standard micro switch SPDT 53.00 CM1305 15A G extended plunger standard micro switch SPDT 69.00 CM1306 15A H button plunger standard micro switch SPDT 58.00 CM1307 15A I ext. panel mnt plunger standard micro switch SPDT 76.00 CM1308 15A J ext. panel mnt roller plunger standard micro switch SPDT 90.00 CM1701 CM1309 15A K ext. p/mnt roller plunger 90º standard micro switch SPDT 90.00 CM1701 15A L long plain lever standard micro switch SPDT 58.00 CM1703 15A M long roller lever standard micro switch SPDT 63.00

CM1703 CM1704 15A N short roller lever standard micro switch SPDT 63.00 CM1705 15A P long wire lever standard micro switch SPDT 63.00 CM1743 15A O short roller (collapsible) standard micro switch SPDT 69.00 CAP-Y CM switch terminal cover 26.00 new CZ-7 series micro switch 10A 250 VAC • Ith: 10A 250 VAC • Ui: 380V • Mounting: Ø 4 mm - 25.4 mm apart (horizontal) • Terminals: Screw terminals (IP40) CZ-7121 CZ-7310 10A I ext. panel mnt plunger standard micro switch SPDT 100.00 CZ-7311 10A J ext. panel mnt roller plunger standard micro switch SPDT 104.00 CZ-7312 10A K ext. p/mnt roller plunger 90º standard micro switch SPDT 110.00 CZ-7120 10A L long plain lever standard micro switch SPDT 81.00 CZ-7121 10A M long roller lever standard micro switch SPDT 81.00 CZ-7141 10A N short roller lever standard micro switch SPDT 81.00 CZ-7144 10A O short roller (collapsible) standard micro switch SPDT 87.00

CZ-7141

Above prices do not include VAT. E&OE K-22 Limit switches

E series industrial limit switches are suitable for most environmental conditions due to their solid construction, IP66 certification and proven reliability over decades of fieldwork. A • Degree of protection: IP66 • Contact blocks with positive opening of the NC contact according to • Conformity to IEC/EN 60947-5-1, VDE 0660-200, EN 50047, UNI EN 1088, EN ISO 12100-1, IEC529 • Rated thermal current (Ithe IEC947-5-1): 10A

B type actuator type description price E100 series (IP66) CENELEC EN50047 Body dimensions: (H) 77.5 x (W) 30.5 x (D) 33 mm fixing hole distance: 20/22 mm Cable entry: 1 x bottom entry (Pg 13.5) C Thermoplastic body (IP66) E10000AI top steel plunger actuator limit switch 1NO+1NC 157.00 E10000BI top steel roller plunger actuator limit switch 1NO+1NC 180.00 E10000CI roller lever side action limit switch 1NO+1NC 180.00 E E10000DI roller lever vertical action limit switch 1NO+1NC 174.00 E10000BI E10000EI rotary roller arm lever limit switch 1NO+1NC 192.00 E10000EI50 rotary Ø 50 mm rubber roller arm lever limit switch 1NO+1NC 230.00 E10000II offset rotary roller arm lever limit switch 1NO+1NC 192.00 E10000FI adjustable length rotary roller arm lever limit switch 1NO+1NC 203.00 E10000HI adjustable rotary Ø6 mm rod lever limit switch 1NO+1NC 213.00 F E10000LI flexible spring rod actuator rod limit switch 1NO+1NC 242.00 E10000LSI Cats whisker actuator limit switch 1NO+1NC 242.00

E10001SCI safety switch for hinges limit switch 1NO+1NC 344.00

Diecast metal body (IP66) E10000AM top steel plunger actuator limit switch 1NO+1NC 237.00 E10000BM top steel roller plunger actuator limit switch 1NO+1NC 244.00 E10000CM roller lever side action limit switch 1NO+1NC 237.00 L E10000DM roller lever vertical action limit switch 1NO+1NC 262.00 E10000EMRA rotary (metal) roller arm lever limit switch 1NO+1NC 333.00 E10000IMRA offset rotary (metal) roller arm lever limit switch 1NO+1NC 333.00 E10000IM50 rotary Ø 50 mm rubber roller arm lever limit switch 1NO+1NC 299.00 E10000FM adjustable length rotary roller arm lever limit switch 1NO+1NC 255.00 E10000HM adjustable rotary Ø6 mm rod lever limit switch 1NO+1NC 255.00 E10000LM flexible spring rod actuator rod limit switch 1NO+1NC 324.00 E10000LSM Cats whisker actuator limit switch 1NO+1NC 324.00

E300 series (IP66) diecast metal body Body dimensions: (H) 89.5 x (W) 52 x (D) 33.5 mm fixing hole distance: 40 mm

E30000EMRA Cable entry: 2 side + 1 x bottom entry (Pg 13.5) E30000AM top steel plunger actuator limit switch 1NO+1NC 324.00 E30000BM top steel roller plunger actuator limit switch 1NO+1NC 324.00 E30000CM roller lever side action limit switch 1NO+1NC 341.00 E30000DM roller lever vertical action limit switch 1NO+1NC 341.00 E30000EMRA rotary (metal) roller arm lever limit switch 1NO+1NC 430.00 E30000IMRA offset rotary (metal) roller arm lever limit switch 1NO+1NC 446.00 E30000IM50 rotary Ø 50 mm rubber roller arm lever limit switch 1NO+1NC 414.00 E30000FM adjustable length rotary roller arm lever limit switch 1NO+1NC 375.00 E30000HM adjustable rotary Ø6 mm rod lever limit switch 1NO+1NC 434.00 E30000LM flexible spring rod actuator rod limit switch 1NO+1NC 393.00 E30000LSM Cats whisker actuator limit switch 1NO+1NC 398.00

E400 series (IP66) diecast metal body CENELEC EN50041 Body dimensions: (H) 89.5 x (W) 52 x (D) 33.5 mm fixing hole distance: 2 x 30 mm Cable entry: 1 x bottom entry (Pg 13.5)

E40000AM top steel plunger actuator limit switch 1NO+1NC 324.00 E40000BM top steel roller plunger actuator limit switch 1NO+1NC 335.00 E40000CM roller lever side action limit switch 1NO+1NC 346.00 E40000DM roller lever vertical action limit switch 1NO+1NC 375.00 E40000EMRA rotary (metal) roller arm lever limit switch 1NO+1NC 418.00 E40000IMRA offset rotary (metal) roller arm lever limit switch 1NO+1NC 418.00 E40000IM50 rotary Ø 50 mm rubber roller arm lever limit switch 1NO+1NC 377.00 E40000FM adjustable length rotary roller arm lever limit switch 1NO+1NC 341.00 E40000HM adjustable rotary Ø6 mm rod lever limit switch 1NO+1NC 377.00 E40000AM E40000LM flexible spring rod actuator rod limit switch 1NO+1NC 341.00 E40000LSM Cats whisker actuator limit switch 1NO+1NC 341.00

K-23 Above prices do not include VAT. E&OE Safety Limit switches

Safety limit switches

type actuator type description price

Pull wire safety switches Pull wire safety switches guarantee the safety of operator who is able to control the immediate stop of machinery at any point in the operating zone.

1) Tension wire until both contact are in the closed position 2) When wire is pulled one contact (A) opens and switch is latched (resettable via front button) 3) If wire breaks, the other contact (B) opens Both contacts should be wired in series Field switching & sensing E10008TBI latching (resettable by button) pull wire limit switch 1NO+1NC 583.00 E40008TBM latching (resettable by button) pull wire limit switch 1NO+1NC 706.00

E40008TBM Key actuated switches 5 way key actuated switches are used on gates, sliding doors and other devices to protect access to dangerous parts of machines. The key is applied to the moving protection barrier and has to be removed from the switch on every opening thus operating a positive opening or the NC contact.

E10001S5I key actuated safety switch limit switch 1NO+1NC 315.00

Hinge operated switches Used to guarantee operator safety, applied to machinery fitted with protection barriers with application directly to the hinge of the enclosure. The switches hinged socket accepts an 8 mm shaft.

E10001SCI safety switch for hinges limit switch 1NO+1NC 344.00

Spare contact blocks for all limit switches ELEM00 standard snap action contact block 1NO+1NC 100.00 E10001SCI ELEM03 slow action contact block 2NO 109.00 ELEM07* slow action (special for gates and lifts) contact block 2NC 100.00 * Slow action with asymmetric working to detect position and direction of moving part Accessories for above limit switches Z5 angled key for key actuated safety limit switches 66.00 Z51 straight key for key actuated safety limit switches 60.00 Z52 adjustable key for key actuated safety limit switches 89.00 ELEM00 Note: For pull wire switch accessories (see page K-26) Z5

new Industrial Foot switches (IP65) EMAS foot operated switches are ideal for all industrial applications they are supplied as open type or with plastic or diecast foot protection, preventing inadvertent operation. Internal cams are provided to accommodate up to 3 x contact blocks, two with simultaneous

PDNS11BX10 operation and one with delayed switching, ideal for two speed operations. Mechanical life: 1.000.000 operations Electrical life: 100.000 operations min. Operating temperature: -5° - +60°C Rated operational current: 4A - 250 VAC Conformity to Standards: EN 60947-5-1, VDE0660, UL508

protection contact type description PPKS11BX10 cover configuration Open type foot switch (IP65) PDNS11BX10 open type industrial foot switch no 1NO+1NC 437.00

Protected foot switches (IP65) PPKS11BX10 protected type industrial foot switch thermoplastic 1NO+1NC 590.00 PDKS11BX10 protected type industrial foot switch diecast 1NO+1NC 868.00 PDKS11BX10 Contact blocks for above foot switches Up to two additional contact blocks can added to foot switches: 1 x simultaneous operation and 1 x with delayed switching for two speed operations.

LK20K13 LK20K13 snap action contact block for foot switches 1NO+1NC 99.00

Above prices do not include VAT. E&OE K-24 Limit switches / Rope-operated pull lever limit switches

The LOVATO ELECTRIC limit switches have been designed to satisfy requirements comprising quick installation, easy wiring, simple setup, modularity, sturdiness and constant reliability. The body cover is hinged at the bottom and removable. The innovative locking bayonet mechanism permits to remove and reposition the operating head in the required configuration with no tools. The auxiliary contact blocks are removable assuring remarkable wiring ease.

• Replaceable actuator heads, 45˚ axial rotation of operating heads • Direct operating operation; safety function according to IEC/EN 60947-5-1 • Ith 10A ‒ IP65 ‒ Ui 690 VAC ‒ M20 cable entry KB A1 S11 KB B2 S11 KB C2 S11 type description contacts price

KB series plastic body IP65 bottom entry (1 x M20) KB A1 S11 top plunger limit switch IP65 1NO+1NC 263.00 KB B2 S11 top roller plunger (metal) limit switch IP65 1NO+1NC 315.00 KB C2 S11 top plunger roller lever (metal) limit switch IP65 1NO+1NC 317.00 KB D2 S11 roller side push level (metal) limit switch IP65 1NO+1NC 317.00 KB E2 S11 rotating roller lever (metal) limit switch IP65 1NO+1NC 343.00 KB F2 S11 rotating roller lever (adjustable) limit switch IP65 1NO+1NC 359.00 KB H1 S11 ceramic rotating rod roller lever limit switch IP65 1NO+1NC 509.00 KB L2 S11 rotating rod lever (adjustable) limit switch IP65 1NO+1NC 352.00 KB M1 S11 omni-directional wobble stick limit switch IP65 1NO+1NC 346.00 KB P1 L11 hinge operating (short cylinder) limit switch IP65 1NO+1NC 630.00 KB P2 L11 hinge operating (long cylinder) limit switch IP65 1NO+1NC 656.00 KB E2 S11 KB F2 S11 KB M1 S11 KN series metallic body IP65 side entry (2 x M20) KN A1 S11 top plunger limit switch IP65 1NO+1NC 371.00 KN B1 S11 top roller plunger limit switch IP65 1NO+1NC 408.00 KN C1 S11 top plunger roller lever limit switch IP65 1NO+1NC 415.00 KN E1 S11 rotating roller lever limit switch IP65 1NO+1NC 430.00 KN F1 S11 rotating roller lever (adjustable) limit switch IP65 1NO+1NC 444.00 KN H1 S11 ceramic rotating rod roller lever limit switch IP65 1NO+1NC 630.00 KN L2 S11 rotating rod lever (adjustable) limit switch IP65 1NO+1NC 461.00 KN M1 S11 omni-directional wobble stick limit switch IP65 1NO+1NC 456.00 KN E1 S11

Spare ‒ contact blocks (interchangeable) KX B S11 contact block snap action 1NO+1NC 145.00 KX B S02 contact block snap action 2 NC 229.00 KX B A11 contact block slow break (make before break) 1NO+1NC 126.00 KX B L11 contact block slow break 1NO+1NC 126.00 S11 Safety limit switches (slow break) KB Q1 L11 slotted lever actuator safety limit switch 1 NO + 1 NC 569.00 KB N1 L11 key operated (straight key) safety limit switch 1 NO + 1 NC 576.00 KB N2 L11 key operated (angled key) safety limit switch 1 NO + 1 NC 576.00

Spare keys for safety limit switches KB N1 L11 KX N1 straight key for safety limit switches – 56.00 KX N2 angled key for safety limit switches – 57.00 KX N2 KX N3 straight “T” key for safety limit switches – 43.00 KX N4 angled “T” key for safety limit switches – 43.00

RS1 series rope operated limit switches

• Double-insulated housing glassfibre-reinforced self extinguishing • Self-cleaning silver-alloy contacts • Snap action contacts • Thermal current: Ith:10A Ui: 250 VAC RS11310 • Protection: IP65 • Dimensions (H) 104 x (W) 30.5 x (D) 35 mm

operating force (N)

Non-latching rope operated limit switches (snap action) RS11310 rope operated limit switch (non latching) 25N 1NO+1NC 550.00

Latching (hand reset) limit switches ISO 13850 compliant

RS131310 RS131310 rope operated limit switch (latching/hand reset) 25N 1NO+1NC 608.00

K-25 Above prices do not include VAT. E&OE Rope-operated pull lever limit switches / Foot switches

operating type description contacts price force (N)

PLNU series heavy-duty Non-latching rope-operated limit switches • Direct (positive) opening action - safety function according to IEC/EN 60947-5-1 • Heavy-duty metal body • Supplied with cable gland (PG11) • Thermal current: Ith: 10A Ui: 400 VAC • Protection: IP65

PLNU1AT25W • Dimensions: (H) 89 x (W) 84 x (D) 40.5 mm

PLNU1AT25W rope operated limit switch (non-latching) 25N 1NO+1NC 703.00 Field switching & sensing

P2LU series heavy-duty latching rope-operated limit switches Latching (hand reset) limit switches ISO 13850 compliant • Heavy-duty metal body • Latching with push button “Reset” facility on switch • Supplied with cable gland (PG11) • Thermal current: Ith: 6A Ui: 400 VAC PLN131311 • Protection: IP65

P2LU series (H) 175 x (W) 85 x (D) 47 mm P2LU1SAT75AG rope operated limit switch (latching/hand reset) 7.5 kg 1NO+1NC 1442.00 P2LU1SAT15AG rope operated limit switch (latching/hand reset) 15 kg 1NO+1NC 1442.00

Heavy duty rope-operated limit switches with Pre-tensioning facility Latching (hand reset) limit switches ISO 13850 compliant • 2 NC contacts (when pre-tensioned) 1 opens if rope breaks the other opens when rope is pulled • Green indicator for correct pre-tensioning adjustment • Large field of overlap for easier regulation of pre-tensioning • Latching with push button “Reset” facility on switch P2L131312 • Supplied with cable gland (PG11) • Thermal current: Ith: 6A Ui: 400 VAC • Protection: IP65

PLN series - 60N (H) 82 x (W) 104 x (D) 40.5 mm PLN131311 rope operated limit switch (latching/hand reset) 60N - 6kg 1NO+1NO 877.00

P33032 P33033 P2L series - 120N (H) 161 x (W) 100 x (D) 48.5 mm P2L131312 rope operated limit switch (latching/hand reset) 120N - 12kg 1NO+1NO 1635.00

Accessories for rope-operated switches P33036 P33034 P33032 adjustable rope terminal clamp Ø 5 mm 15.50 P33033 rope eye of Ø 5 mm (cable end thimble) 6.00 P33034 turn buckle M6 x 60 for rope tensioning 70.00 P33035 P33035 threaded eye bolt M8 guide for rope 23.00 P33036 steel rope 0.5mm PVC sheathed (red insulated) (100met) 3062.00

Industrial foot switches thermoplastic and metallic (IP54) • Self-extinguishing double insulation polymer thermoplastic • M20 cable entry KG1 • Conventional thermal current Ith: 10A Ui: 690 VAC

KG series thermoplastic foot switches KG100S11 open-type industrial foot switch thermoplastic 1NO+1NC 753.00 KG200S11 closed-type industrial foot switch thermoplastic 1NO+1NC 900.00

KR series metallic foot switches • Aluminium zinc alloy body KG2 KR100S11 open-type industrial foot switch diecast 1NO+1NC 1405.00 KR200S11 closed-type industrial foot switch diecast 1NO+1NC 1681.00

Additional accessories KGX01 kit for adding a second contact block to foot switches – 35.00

KR2 KGX02 contact block mounting bracket – 71.00 KXBS11 additional contact block for above foot switches 1NO+1NC 145.00

Above prices do not include VAT. E&OE K-26 Float switches

Control and regulation of liquid levels

• One piece press blown casing • Electrical contacts protected by three watertight chambers • 10 bar withstand pressure • TUV, IMQ, ENEC certified

float switches submerged float switches

type microstart minimatic little mercury little matic matic model /I /C /MC /HG EX /V/HG /P/HG regulation of particularly turbulant industrial regulation of diesel oil, water to control levels of water specially produced to for emptying or filling of tanks application water containing residues of suspended and hidrocarbon mixture, or liquid with vapour level maintain the air cushion in or cisterns agglomerations or sewer water motor oils, etc. to a max temp of 130°C autoclaves Switching method micro switch micro switch switch mercury bulb switch mercury bulb mercury bulb Contact configuration 1 x N.O. 1 x ch/over 1 x ch/over 1 x ch/over 1 x ch/over (self cleaning) 1 x NO 1 x NO Rated voltage 250 VAC 250 VAC 250 VAC 250 VAC 9.6V 60 VAC 60 VAC Switching current (resistive) 10A 10A 10A 10A 21.4 mA 0.25A 0.25A Switching current (inductive) 4A 4A 4A 4A ‒ ‒ ‒ Maximum working pressure 10 bar 10 bar 10 bar 10 bar 10 bar 4 bar 8 bar Temperature limits +55°C +55°C +55°C +55°C -20°C - +40°C +130°C +55°C Differential degrees (horizontal) 30° 30° 15° 10° 15° 10° 5° Casing type one piece blow moulded Polyurethane 304 AISI stainless steel blow moulded polyurethane Water resistant 100 meters 100 meters 100 meters 100 meters 100 meters 100 meters 100 meters Electric cable PVC PVC 3X1 RF60 A05VVF 3X1 RF60 A05VVF special cable (blue) silicone silicone Dimensions (float) (H x W or Ø) 140 x 70mm 172 x 80mm 138 x 76mm 138 x 76mm 138 x 76mm 75mm Ø 185 x Ø28.5mm

level regulator ATEX inner chamber single certified for hazardous blow moulded housing and potentially slimline (1”) float switch internal weight controlling the rotation stainless steel 304 the switch due to compact explosive areas. can be introduced into centre of gravity close to the cable for high temperature dimensions of microstart Group and category II 1G a tank through a connection applications (130°C) can be installed directly onto Striking Protection Eex ia 28.5 mm hole submerged pumps Group of striking IIC Temperature class T6

cable entrance cable entrance

differential external counterweight counterweight

external counterweight

Price With 5 meter cable 346.00 390.00 1096.00 1096.00 1433.00 2010.00 1474.00 With 10 meter cable 492.00 390.00 1333.00 1297.00 1910.00 2483.00 1924.00

Counter weight standard 100g supplied supplied 28.00 28.00 28.00 ‒ ‒ metallic Ø28 mm 360g - - 550.00 550.00 550.00 550.00 550.00

K-27 Above prices do not include VAT. E&OE Flow switches

max. type supply description price pressure

Flow / pump in-line flow switch For the control of electric pumps connected to accumulation tanks to increase flow or pressure. It controls the start-up or switching off of the motor in correspondence to water requirements, assuring a constant flow.

The highly sensitive switch permits control of flow as low as three litres per minute. When a tap is opened and water flows at over three litres per minute, it starts the motor and,

FLOW/PUMP if flow drops below three litres per minute (due to closing tap or empty accumulation tank), Field switching & sensing it stops the motor.

Manufactured entirely of glass reinforced polyamide with threaded input/output joint G1 for vertical in-line connection to liquid piping.

• Minimum flow: 3 litres/min. (max. 90 litres / min.) • Maximum pressure: 8 BAR • Maximum temperature: 40ºC • Relay: 10A 250 VAC

FLOW/PUMP 250 VAC 8 BAR in-line flow switch 1” inch pipe thread 921.00

Flow / Matic H paddle-type flow switch Designed for the control of fluid movement by circulator or centrifugal electric pumps. The high sensitivity switch permits control of flow as low as 20 litres per minute. They incorporate a brass threaded G1 joint for piping from one inch and over. The electric contact is housed externally to the flow switch and is moved by a magnet located on the head of the switch. The glass reinforced polyamide paddle can be cut to size in 25 mm segments to the diameter of pipe. FLOW/MATIC H

• Minimum flow: 20 litres/min. • Maximum pressure: 10 BAR • Maximum temperature: 100ºC • Relay: 10A NO + NC 250 VAC

FLOW/MATIC H10AR 250 VAC 10 BAR paddle flow switch 1” inch screw connection 1255.00

JOLLY PUMP - in-line booster pump JOLLY PUMP12 is a super-silent automatic electric pump designed to boost water flow to various outlets, featuring automatic starting, stopping and dry running protection in gravity feed or pressure tank systems. Installed in line with the main supply pipe to boost water flow new and pressure without having to alter the main system. When a tap is turned on and flow in the pipe reaches 3 L/min the motor starts automatically, resulting in increased flow constantly until the tap is turned off.

• Minimum flow: 3 litres / min. (switches pump on) • Maximum pump pressure: 1.2 BAR • Maximum temperature: 60ºC • Supply: 1 phase 250 VAC - 245W

max. max. type supply description pressure flow

JOLLY PUMP 12 JOLLY PUMP 12 250 VAC 1.2 BAR 53 L/min. 245W booster pump 3410.00

Above prices do not include VAT. E&OE K-28 Float/flow switches (reed type)

When the magnetic field (caused by an internal permanent magnet) is moved into the proximity of the sealed reed switch inside the stationary stem, the reed switch contacts close the electrical circuit. When the magnet is moved away from the reed switch the circuit is opened. The float switches are extremely compact, simple and easy to install and not effected by electrical interference and withstand chemicals.

Safe ‒ convenient ‒ low cost Electrical connection: 300 mm cable Switch current: 70 VA Switch voltage: 250 VAC / 200 VDC Switch contact: N.O. (reversible by reversing float) LS-264 Accuracy: ± 2 mm in water

thread pressure internal/ type mounting description price size (mm) withstand external

Plastic (top/bottom mount) • Float size: (H) 24 mm (Ø) 20 mm • Material: PVC • Operating temperature: -10°C - +70°C

Short stem float switch 36 mm internal mounting LS-264 top or bottom M10 8 BAR internal vertical mount float switch 92.00

Long stem float switch 55 mm internal mounting LS-297 top or bottom M10 8 BAR internal vertical mount float switch 109.00 LS-317 LS-064A LS-318-1

Stainless steel • Float size: (H) 28 mm (Ø) 28 mm • Material: SUS 304 stainless steel • Operating temperature: -30°C - +125°C

Short stem float switch 40 mm internal mounting LS-317 top or bottom G1/8” 20 BAR internal vertical mount float switch 412.00

Long stem float switch 100 mm internal mounting LS-052-1 LS-064A top or bottom G1/8” 20 BAR internal vertical mount float switch 463.00

Long stem float switch 100 mm external mounting LS-318-1 top or bottom NPT 1” 20 BAR external vertical mount float switch 564.00

Bent stem (90°) float switch 75 mm internal mounting LS-052-1 side mount G1/8” 20 BAR internal horizontal mount float switch 427.00

LS-147 Nylon (side mount) hinged type Can be used for “high” or “low” level sensing (by turning float direction “up” or “down”).

• Float size: (L) 47 mm (Ø) 17 mm • Material: nylon • Operating temperature: -10°C - +75°C

LS-147 side mount M16 8 BAR internal horizontal mount float switch 198.00 LS-148 side mount NPT 1/2” 8 BAR external horizontal mount float switch 200.00 LS-148

Stainless steel (side mount) hinged type Can be used for “high” or “low” level sensing (by turning float direction “up” or “down”).

• Float size: (L) 47 mm (Ø) 17 mm • Material: SUS 304 stainless steel • Operating temperature: -30°C - +125°C

LS-055-1 LS-154-1 side mount M16 10 BAR internal horizontal mount float switch 488.00 LS-055-1 side mount NPT 1/2” 10 BAR external horizontal mount float switch 506.00

FSP...

K-29 Above prices do not include VAT. E&OE Flow switches (reed type)

Electrical connection: 300 mm cable Switch rating: 0.8A max Switch current: 1.5A Switch voltage: 250 VAC / 200 VDC Material: Plastic Brass Stainless Liquid medium: Clean water

FS100 FS902 FS300/402 FS200/500 Field switching & sensing

type for domestic use heavy duty for domestic use heavy duty heavy duty heavy duty

Model FS-100 FS-200 FS-902 FS-300 FS-402 FS-500

1/2”NPT for inlet Fitting NPT3/4” NPT3/4” 1/2” NPT for NPT3/4” NPT1/2” NPT1/2” outlet

Flow switches housing plastic PPR brass - C37700 plastic PBT SUS304 SUS304 brass - C37700

Operating pressure 120 PSI max 150 PSI max 140 PSI max 250 PSI max 250 PSI max 150 PSI max

Temperature range -10 - 80ºC -10 - 120ºC -10 - 105ºC -20 - 120ºC -20 - 120ºC -10 - 120ºC

Medium (liquid) clean water clean water clean water clean water clean water clean water

Contact form form A S.P.S.T. form A S.P.S.T. form A S.P.S.T. form A S.P.S.T. form A S.P.S.T. form A S.P.S.T.

Cany current 1.5A 1.5A 1.0A 1.5A 1.5A 1.5A

Switch current 0.8A max 0.8A max 0.7A max 0.8A max 0.8A max 0.8A max

Switch voltage 220 VAC/DC 220 VAC/DC 220 VAC/DC 220 VAC/DC 220 VAC/DC 220 VAC/DC

Power rating 50VA 50VA 50VA 50VA 50VA 50VA

AWG 22, 300 mm AWG 22, 300 mm AWG 22, 300 mm AWG 22, 300 mm AWG 22, 300 mm AWG 22, 300 mm length, length, length, length, length, length, Lead wire U1430 lead wire U1430 lead wire U1430 lead wire U1430 lead wire U1430 lead wire U1430 lead wire free terminal free terminal free terminal free terminal free terminal free terminal

Operating flow rating 1.5L/min 1.10 - 8L/min 0.75 - 2L/min 1.0 - 8L/min 1.2 - 4L/min 1 - 4L/min

Setting flow value accuracy ±10% ±10% ±10% ±10% ±10% ±10%

As signal of As signal of As signal of As signal of As signal of As signal of flow direction flow direction flow direction flow direction flow direction flow direction Mounting orientation (vertical or horizontal) mounting mounting mounting mounting mounting mounting orientation at any orientation orientation orientation orientation orientation orientation

15L/min 25L/min 10L/min 10L/min 10L/min 15L/min Maximum flow (pressure drop is (pressure drop is (pressure drop is (pressure drop is (pressure drop is (pressure drop is 10 PIS) 10 PIS) 10 PIS) 10 PIS) 10 PIS) 10 PIS)

Wire colour black colour black colour black colour black colour black colour black colour

30g for 11ms 30g for 11ms 30g for 11ms 30g for 11ms 30g for 11ms 30g for 11ms Mounting shock duration duration duration duration duration duration

Mounting vibration 35 to 500Hz 35 to 500Hz 35 to 500Hz 35 to 500Hz 35 to 500Hz 35 to 500Hz

Duration of cycle 100.000 cycles 100.000 cycles 100.000 cycles 100.000 cycles 100.000 cycles 100.000 cycles

Price 247.00 764.00 217.00 824.00 681.00 699.00

Above prices do not include VAT. E&OE K-30 Fuel level sensors

LFS5 series fuel level sensor (IP67) S5 series level sensors employ a magnetic field principle to sense the fuel level depth and to operate the low level 2.8mm alarm signal. The sensors feature long life, unaffected by vibration and are anti explosive. mm 19.2 • Low level alarm contact: 500 mA • Output signal: 0 - 190 Ω or 4-20mA Ø 12.7mm • Accuracy: 12 mm Ø 35mm Material: Main body made of SU316 stainless steel Mounting: Standard SAE 5 hole mounting flange (supplied with M5 screws and NBR gasket) 32mm sensor output type supply description price length signal 0 - 190Ω resistance output -40°C - +85°C LFS5-150 150 mm 0 - 190Ω – magnetic fuel level sensor 723.00 LFS5-200 200 mm 0 - 190Ω – magnetic fuel level sensor 880.00 LFS5-250 250 mm 0 - 190Ω – magnetic fuel level sensor 961.00 LFS5-300 300 mm 0 - 190Ω – magnetic fuel level sensor 1104.00 LFS5 LFS5-350 350 mm 0 - 190Ω – magnetic fuel level sensor 1219.00 7mm LFS5-400 400 mm 0 - 190Ω – magnetic fuel level sensor 1308.00 LFS5-500 500 mm 0 - 190Ω – magnetic fuel level sensor 1545.00 Signal (out) Red LFS5-600 600 mm 0 - 190Ω – magnetic fuel level sensor 1608.00 Black Common (input) LFS5-800 800 mm 0 - 190Ω – magnetic fuel level sensor 2290.00 LFS5-1000 1000 mm 0 - 190Ω – magnetic fuel level sensor 2782.00 White Low level alarm output LFS5-1200 1200 mm 0 - 190Ω – magnetic fuel level sensor 3259.00 LFS5-1400 1400 mm 0 - 190Ω – magnetic fuel level sensor 3636.00 LFS5-1600 1600 mm 0 - 190Ω – magnetic fuel level sensor 4144.00 LFS5-2000 2000 mm 0 - 190Ω – magnetic fuel level sensor 4900.00 new 4 - 20mA output supply voltage: 24-32V -40°C - +85°C LFS5-150/4-20 150 mm 4 - 20mA 24 VDC magnetic fuel level sensor 801.00 LFS5-200/4-20 200 mm 4 - 20mA 24 VDC magnetic fuel level sensor 946.00 LFS5-300/4-20 300 mm 4 - 20mA 24 VDC magnetic fuel level sensor 1170.00 LFS5-400/4-20 400 mm 4 - 20mA 24 VDC magnetic fuel level sensor 1375.00 LFS5-500/4-20 500 mm 4 - 20mA 24 VDC magnetic fuel level sensor 1607.00 LFS5-600/4-20 600 mm 4 - 20mA 24 VDC magnetic fuel level sensor 1696.00 LFS5-800/4-20 800 mm 4 - 20mA 24 VDC magnetic fuel level sensor 2361.00 LFS5-1000/4-20 1000 mm 4 - 20mA 24 VDC magnetic fuel level sensor 2853.00 LFS5-1200/4-20 1200 mm 4 - 20mA 24 VDC magnetic fuel level sensor 3372.00 LFS5-1400/4-20 1400 mm 4 - 20mA 24 VDC magnetic fuel level sensor 3752.00 LFS5-1600/4-20 1600 mm 4 - 20mA 24 VDC magnetic fuel level sensor 4263.00 LFS5-2000/4-20 2000 mm 4 - 20mA 24 VDC magnetic fuel level sensor 5037.00 Other lengths available on request LFTN series fuel tank level sensors (IP67) LFTN-... LFTN series sensors employ a magnet field principle to sense fuel level depth and to operate a low level alarm signal. The sensor also incorporates a suction pipe, return pipe and breather pipe into the same mounting flange as the sensor.

sensor output fuel pipes (bulge fitting) type description length signal suction return breather

LFTN-150 150 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 921.00 LFTN-200 200 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1015.00 LFTN-250 250 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1096.00 LFTN-300 300 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1174.00 LFTN-400 400 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1349.00 LFTN-500 500 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1527.00 LFTN-600 600 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1799.00 LFTN-700 700 mm 0 - 190Ω 10 mm 10 mm 6 mm fuel level sensor 1967.00 LF01 mechanical fuel level gauges (aluminium alloy) -40°C - +85°C LF01 mechanical fuel gauges work on a float connected to a swivel rod which indicates fuel level as the float adjusts to the fuel level.

• Mounting: 6 hole mounting flange (M45x2 thread to accept gauge)

LF01-150 150 mm gauge mechanical fuel level gauge 540.00 LF01-200 200 mm gauge mechanical fuel level gauge 556.00 LF01-250 250 mm gauge mechanical fuel level gauge 572.00 LF01-300 300 mm gauge mechanical fuel level gauge 604.00 LF01-400 400 mm gauge mechanical fuel level gauge 667.00 LF01-500 500 mm gauge mechanical fuel level gauge 715.00 LF01-200 LF01-600 600 mm gauge mechanical fuel level gauge 801.00 LF01-700 700 mm gauge mechanical fuel level gauge 835.00

K-31 Above prices do not include VAT. E&OE Pressure switches LEFOO

LF10 air pressure switches Pressure switches used to regulate tank pressures between two preset values on small (up to 200psi) electrically driven air compressors. Supplied with unloader valve (preventing starting under load) and new manual auto-off override switch. • Visible contact / no wire looping / ample wiring space • Automatic unloader valve / manual “auto-off”override facility • 2 x NC contacts 12A 240 VAC

operating pressure differential factory pipe contact type min ON max OFF range setting fitting rating price PSI PSI PSI PSI female 1) 240V Field switching & sensing LF10-1H11123-80 25 100 20-35 55-80 1/4 NPT 12A 174.00 LF10-1H11123-115 35 150 30-40 85-115 1/4 NPT 12A 174.00 LF10-1H11123-150 50 175 35-55 110-150 1/4 NPT 12A 174.00

LF16 water pump pressure switch LF16 pressure switches provide time tested, reliable control for automatic water systems. Universally accepted for use as original equipment on water well pumps or pumping systems.

LF16-1... • Visible contact / no wire looping / ample wiring space • Automatic unloader valve / manual “auto-off”override facility • 2 x NC contacts 16A 240 VAC

LF16-111-40PSI 20 80 15-30 20-40 1/4 NPT 16A 199.00 LF16-111-50PSI 20 80 15-30 30-50 1/4 NPT 16A 199.00 LF16-111-60PSI 20 80 15-35 40-60 1/4 NPT 16A 199.00

LF19/18 air compressor pressure switch Designed to regulate tank pressure between two preset values on three-phase electrically driven compressors.

• Non-metallic, corrosion-resistant cover • Automatic unloader valve / manual “auto-off”override facility

BAR BAR BAR BAR BAR LF19 - 1 phase pressure switch 2 x NC contacts 16A 250 VAC LF19-111121-3BAR 1 6 2.0-4.0 1-3 G1/4” 16A 167.00 LF19-111121-4BAR 5 14 8.0-10.0 1.8-4 G1/4” 16A 167.00 LF18 - 3 phase pressure switch 3 x NC contacts 16A 400 VAC

LF18-1... LF18-111121-5BAR 2 8 1.0-3.0 3.8-5 G1/4” 16A 222.00 LF18-111121-7BAR 3 11 1.4-4.0 5.6-7 G1/4” 16A 222.00 LF18-111121-10BAR 4 16 1.8-4.5 8-10 G1/4” 16A 222.00 Note:1 BAR = 14.5 PSI 1) Other pipe fittings available on request

new LF55 pressure switch for refrigeration systems LF55 series pressure switches are used with fluorinated refrigerants to control the pressure of compressors in refrigeration system, can also used in air and water applications.

• Medium: Refrigerant, air, water, oil -10 - +100°C • Contact: SPDT 10A 250 VAC

BAR BAR BAR BAR fitting 250V OFF ON LF55... LF5503 -0.5 3 0.35-1.5 2.0 1.0 M12 X 1.25 10A 324.00 LF5506 -0.5 6 0.6-4 3.0 2.0 M12 X 1.25 10A 324.00 LF5510 1 10 1-3 6.0 5.0 M12 X 1.25 10A 324.00 LF5516 3 16 1-4 10.0 8.0 M12 X 1.25 10A 324.00 new LF5520 5 20 2-5 16.0 13.0 M12 X 1.25 10A 324.00 FS series (paddle type) liquid flow switches Designed for managing liquid flow changes of water, ethylene glycol or other non-hazardous liquids in pipes. When liquid flow is higher or lower than pre-set value a SPDT switch operates.

• Supplied with 3 fitted paddles for Ø 25 - 75 mm pipes +spare for pipes up to Ø 200 mm • Adjustable flow setting for different requirements • Brass 1” NPT connection (available in stainless steel for ammonia and other medium) • Max liquid pressure: 1 Mpa - can be used in multiple applications

FS51 IP33 paddle type liquid flow switch 1” NPT 10A 473.00 FS52 FS52 IP55 paddle type liquid flow switch 1” NPT 10A 622.00

Above prices do not include VAT. E&OE K-32 Pressure sensors

• 2 x digital outputs (NPN or PNP) and 1 x analog output (1-5V or 4-20mA) • Various unit conversion functions (kPa, kg/cm2, bar, mmHg, psi, inchHg) • Selectable LED (3 colours) set different colour for different parameter • 10 sets of output response times available (2ms- 5.000ms) • Connection: 1/8 PT, inner pore M5 • Safety control function (to prevent unwanted parameter changes)

pressure output type type description price range (kPa) 2 x digital 1 x analog

Multi-function miniature pressure sensor (H)30 x (W)30 x (D)26 mm 2 x digital and 1 x 4 - 20mA output DPA01P-P -100-100kPa PNP +4-20mA DPA mini pressure sensor 1408.00 DPA10P-P -100-1000kPa PNP +4-20mA DPA mini pressure sensor 1408.00 DPA01N-P -100-100kPa NPN +4-20mA DPA mini pressure sensor 1408.00 DPA10N-P -100-1000kPa NPN +4-20mA DPA mini pressure sensor 1408.00 2 x digital and 1 x 1 - 5V DPA... DPA01Q-P -100-100kPa PNP +1-5V DPA mini pressure sensor 1408.00 DPA01M-P -100-100kPa NPN +1-5V DPA mini pressure sensor 1408.00 DPA10M-P -100-1000kPa NPN +1-5V DPA mini pressure sensor 1408.00 Accessories for pressure sensors DPA-PFKit panel mount accessory (31 x 31 mm cut-out) 30.00 DPA-FMKit surface mount support bracket (all sides mounting) 17.00

K-33 Above prices do not include VAT. E&OE Smoke detectors

Photoelectric smoke detectors

type supply standby alarm description price current current

Q series smoke detectors EN54 compliant Q01-4 • Dual, bicolour LEDs (green: standby / red: alarm) offer 360º sensing • Standard detector (4 wire) with relay output 0.8A - 30 VDC / 0.4A - 250 VAC • Made of high endurance, solid and colour-fast fire-proof plastic • Termination base (with captive screws) for easy installation • Passed strict EMC tests, illuminating false alarms caused by interference from nearby devices

Smoke detector (Ø) 102 mm x (H) 48 mm Field switching & sensing

Q01-4 12 - 30 VDC 25 - 75μA 45 mA photoelectric smoke detector 423.00 Q05-4 Combination smoke and heat detector (Ø) 102 mm x (H) 54 mm

Q05-4 12 - 30 VDC 55 - 85μA 45 mA combination smoke + heat detector 498.00

8011 series smoke detectors EN54 compliant

• Dual LEDs offer 360º sensing • Standard detector 2 wire ‒ available in 4 wire (relay output) on request • Made of high endurance, solid and colour-fast fire-proof plastic • Termination base (with captive screws) for easy installation

8011-3 Smoke detector (Ø) 102 mm x (H) 47 mm 8011-3 12 - 30 VDC 25 - 75μA 40 mA photoelectric smoke detector 324.00

Accessories for above smoke detectors

06MB Flush mount frame for sensors Q01-4, Q05-4, 8011-3 50.00

QA31 series single station smoke detector EN54 compliant

• Advanced photoelectric technology for precise detection • Equipped with 9 VDC battery and 220 VAC power plug QA31-4 • Low-battery warning (flashing LED indicates battery replacement) • Built-in manual test button, buzzer (90dB/met.) and flashing LED • Standard detector (4 wire) with relay output 0.8A- 30 VDC / 0.4A - 250 VAC • Independent stand-alone device ‒ can be installed without any wiring

Single station smoke detector (Ø) 105 mm x (H) 40 mm QA31-4 100 - 220 VAC and/or 9V battery supply photoelectric smoke detector 433.00

Manual call point “in case of fire” break-glass devices

• Surface mount with plastic film on glass (H) 88 x (W) 88 x (D) 52 mm • Test key inserts from bottom • Suitable for majority of conventional fire alarm systems AH-0217 • Operating contact 6A 250 VAC

AH-0217 emergency “break glass” manual call point enclosure 204.00

Audible and visual indicating devices

Audible sounder and beacon IP44 Electronic sounder designed for use with fire alarm, security and industrial signalling systems.

• 32 - signal tones selectable by Dip switch • High sound output with low current consumption • Volume control as standard (0 - 20dB adjustable) AH-03127-BS • Two sets of input and output terminals for easy installation

AH-03127-S 24 VDC 14.5mA surface mount (Ø 92.5 mm) electronic sounder 498.00

AH-03127-BS 24 VDC 14.5mA electronic sounder and illuminated beacon 647.00

Fire alarm bell

• Bell with ABS plastic base for easy mounting and total insulation from electricity • Motor energised, low power consumption, long operating life

NQ418 24 VDC 28mA 4” (100 mm) bell 90dB @1met 324.00

NQ418 NQ618 24 VDC 28mA 6” (152 mm) bell 90dB @1met 209.00

Above prices do not include VAT. E&OE K-34 Safety light curtain

With its small-size housing, EOS2/4 series is ideal for the protection of any tool machine, in particular where space restrictions exist. Its zero-dead-zone on one side, allows EOS2/4 to keep its original resolution when installed on a plane and up to 40 mm when installed at 90° against another EOS2/4 unit. The hardware configuration feature does new not require any programming allowing easy installation and replacement. • Power supply: 24 ± 20% (VDC) • Signalling: LEDs for light curtain’s status and diagnostic • M12 connector: (8 pin for receiver/5 pin for emitter) see page K-21 • Fastening: Standard L-shaped brackets for easy installation included • Safety outputs: 2 PNP - 400 mA at 24 VDC with short-circuit, overload, polarity reversal protection • Built-in, selectable manual/automatic Start/Restart • Built-in feedback input for external relays monitoring (EDM)

protected dimensions (mm) type resolution description price height (H) (W) (D)

EOS2 - type 2 safety light curtains (IP65/67) • Detection: Hand • Maximum range: 12 m • Safety Level: Type 2, SIL 1, SILCL 1, PL c, Cat. 2

1320211 30 mm 310 mm safety light curtain 363 28 30 7066.00 1320212 30 mm 460 mm safety light curtain 513 28 30 8307.00 1320213 30 mm 610 mm safety light curtain 663 28 30 9548.00 1320214 30 mm 760 mm safety light curtain 813 28 30 10981.00 1320215 30 mm 910 mm safety light curtain 963 28 30 12413.00 1320216 30 mm 1060 mm safety light curtain 1113 28 30 13622.00 EOS4 - type 4 safety light curtains (IP65/67) • Detection: Finger • Maximum range: 6 m • Safety Level: Type 4, SIL 3, SILCL 3, PL e, Cat. 4

1310011 14 mm 310 mm safety light curtain 363 28 30 15341.00 1310012 14 mm 460 mm safety light curtain 513 28 30 18778.00 1310013 14 mm 610 mm safety light curtain 663 28 30 22216.00 1310014 14 mm 760 mm safety light curtain 813 28 30 25780.00 1310015 14 mm 910 mm safety light curtain 963 28 30 29217.00 1310980 • Detection: Hand • Maximum range: 12 m

1310211 30 mm 310 mm safety light curtain 363 28 30 9803.00 1310212 30 mm 460 mm safety light curtain 513 28 30 11458.00 1310213 30 mm 610 mm safety light curtain 663 28 30 13113.00 1310214 30 mm 760 mm safety light curtain 813 28 30 15023.00 1310215 30 mm 910 mm safety light curtain 963 28 30 16932.00 1310216 30 mm 1060 mm safety light curtain 1113 28 30 18842.00 1310217 30 mm 1210 mm safety light curtain 1263 28 30 20751.00 Mounting accessories for above safety light curtains 1310980 bracket set of 4 180° swivel brackets for EOS4 - EOS2 728.00 1310997 bracket set of 4 flat brackets EOS4 - EOS2 501.00 1310997 1310973 bracket set of 8 vibration dampers EOS4 - EOS2 410.00

Mosaic safety controller DIN rail mounting (H) 99 x (W) 22.5 x (D) 114 mm Mosaic is a modular, configurable safety controller for protecting machines or plants. It is capable of monitoring several safety sensors and commands, such as safety light curtains, laser scanners, photocells, mechanical switches, mats, emergency stops, two-hand controls, concentrating management of these in a single, flexible device.

• Safety level: SIL 3 – SILCL 3 – PL e – Cat. 4 • Operating temperature: -10 ... 55 °C • Storage temperature: - 20 ... 85 °C

1100000 type description

1100000 main unit, also usable as a stand-alone device, able to control any other expansion units 4911.00 1100010 I/O expansion unit: 8 digital inputs and 2 OSSD pairs with 400mA output current 4052.00 1100021 digital input expansion unit: 16 digital inputs 3888.00 1100031 digital output expansion unit: 4 OSSD pairs 4420.00 1100041 safety relay unit: 4 relays 2660.00 1100043 safety relay unit with configurable outputs and 8 programmable digital signal outputs 4911.00 1100060 proprietary removable memory card 546.00

1100041 1100061 bus connector (necessary to connect 1100000 to expansion units) 228.00 1100062 programming cable (USB A cable ....) 273.00

K-35 Above prices do not include VAT. E&OE Now represented throughout South Africa by EM For all your marking requirements Markingenius® MG3 Thermal transfer printer

- Quality made in Italy -

Markingenius® MG3 is a high resolution printer based on thermal transfer technology, capable of producing tags for cables, pipes and tubes; terminal block markers and legends and labels for all electrical panels, components and equipment.

Made in Italy