The safety standard The safety standard

Ot

Et her herCat 4% The fuTure is wide open. s 5% Leading manufacTurers iec approves opensafeTY POWERLINK PROFINET TrusT in opensafeTY as worLdwide sTandard 11% 28% | | TCP/IP 22% Market shares of The -independent openSAFETY protocol was tested Ethernet/IP according to IEC 61784-3 FSCP 13 and approved by national 30% (Source: IMS Research 3rd quarter 2009) IEC committees representing 27 countries including China, USA and Germany, and is therefore released for international standardization. Because openSAFETY is bus independent, n 91 % realised with openSAFETY it can be used with all fieldbus or industrial Ethernet systems.

End customers have been requesting a uniform and manufacturer- independent standard for years, and openSAFETY is the response to those requests. It allows increases in productivity that are currently Highlights at a glance:| not possible with other safety protocols. n n o n e single,uniformstandardforallleading

n n maximumproductivityduetoefficientcross-communication

n n reducedcommissioningandmaintenancetime

Be on The safe side! n n automaticsafeparameterization

Automotive OEMs SIL3 certification by TÜV Rheinland and TÜV Süd n n perfectlysuitedtosafemodularmachineconcepts and suppliers EthernetPOWERLINKStandardizationGroup(EPSG) POWERLINK-Office n n Building Construction s o l e 100%opensafetysolution automation industry Bonsaiweg 6 · 15370 Fredersdorf · Germany n n f a s t e s t IEC61508SIL3communicationsolution Phone: +49 33439 539 270 Chemical Machine Fax: +49 33439 539 272 n n building industry n o riskinvolvedininvestment:TÜVcertifiedconformancetest [email protected] www.open-safety.org Energy Shipbuilding industry

Transport Food and beverage Connecting Industries: industry industry openSAFETY provides one universal safety solution for all Aerospace Wind energy industry industrial sectors industry

Solar energy Pharmaceutical, cosmetics industry and medical industry

3 MM-E01419.137 © EPSG 2014 2

oS_PR_en_V2_RZ_140416.indd 3-2 16.04.14 16:09 The safety standard

markeT advanTage BY inTegraTed safeTY TechnoLogY one safeTY sTandard for Your enTire producTion pLanT | |

openSAFETY constitutes a universal safety standard for an entire production line, irrespective of the control system manufacturer and fieldbus standard used in it. The bus-independent openSAFETY standard therefore POWERLINK reduces costs as well as commissioning time for production facilities as a whole. Visualisation PLC/PC Drive IP 67 Safe I/O

Ethernet/IP

PROFINET Safe PLC IP 67 Safe I/Os IP 20 Safe I/Os Safe Sensors

POWERLINK SERCOS Modbus EtherNet/IP PROFINET your fieldbus

Machine 1 Machine 2 Machine 3 Machine 4 Machine 5 Safe and Non-safe Drives PLC/PC Safe PLC Safe I/Os Drives Safe Drives Safe Sensors Drives

Smart Safe Reaction – it doesn‘t always have to mean downtime. Benefits for plant operators Benefits for machine manufacturers Benefits for sensor manufacturers openSAFETY: the first open and Conventional safety technology often means stopping all the bus-independent safety standard for machines when the smallest disturbance occurs. Smart Safe Re- n n asingle,consistentsafetystandardforanentirelineorplant n n free choiceofsafetysensors n n onlyone-timedevelopmentrequired action uses a completely new approach. Flexible safety functions all Industrial Ethernet solutions n n independence ofcontrolsystemmanufacturers n n fasterreactiontimes n n reducedinvestmentrisks such as Safe Direction or Safely Limited Increment are integral parts of the drive system and open up new perspectives. Intuitive n n perfectly suitedtosafemodularplantconcepts n n tighter safetydistances n n minimaltime-to-market connection and graphic virtual wiring of certified function blocks n n minimal commissioningandretrofittime n n higher productivity n n l o w costsduetoopensource makes it possible to easily and clearly represent even highly n n investment securitythroughlegalandtechnicalindependence n n easy commissioninganddiagnostics n n interoperabilityguaranteed complex dependencies. Safe Motion certified n n facilitation ofMachineryDirectiveimplementation n n noriskforredesigns

4 5 6 7

oS_PR_en_V2_RZ_140416.indd 4-7 16.04.14 16:09