Concrete and Masonry Systems

Total Page:16

File Type:pdf, Size:1020Kb

Concrete and Masonry Systems CONCRETE AND MASONRY SYSTEMS MADE IN GERMANY MOST ADVANCED INTEGRATED DUSTLESS SYSTEM CONCRETE AND MASONRY ARE YOU OSHA READY? Effective Sept. 23, 2017 OSHA DUSTLESS TOOL SYSTEMS requires all and any indoor and outdoor drilling, cutting, grinding, etc. to be dustless! RF 14-115 BE READY WITH METABO! RS 14-125 RS 17-125 W 12-125 HD CED ace Pre p rf u PE 12-175 e S M n a WE 15-125 o HD GED t PWE 11-100 s W 12-125 HD o W 12-125 HD S WEV 15-150 HT n CED Plus / Tuck Point Kit r e y t C e r u c WEV 15-125 HT Auto Clean t 7" Surface t Prep Kit* n i Vacuum Cleaner n o MFE 30 ASR35 ACP g C WEV 10-125 KHE 2444 MHE 96 UHEV 2860-2 KHE D-26 SBE 18 LTX Quick MHE 5 KHE 3250 C o SBE 650 n SBEV g KHA 18 LTX c KHE 96 r 1000-2 n e ki t SBE 850-2 a e re / M B KHE 76 as & KHA 18 LTX BL 24 on ng + ISA 18 LTX ry Drilli KHE 56 KHA 36 LTX KHE 5-40 *Requires 175 CFM vacuum or more for compliance Featured Accessories 630829000 9/16" Dust extraction accessory Dustless drilling up to 9/16” dia. Model DDE 14 631343000 2-3/4 Dust extraction accessory Dustless drilling up to 2-3/4”dia. Dual suction chamber collects dust while allowing full suction to adhere to walls or ceilings. Model DDE 72 Concrete and Masonry Tool Selection Guide Description Model No. Order No. MAX RPM or BPM Amps Capacity (concrete) Joules 4 1/2” Hand-held Scarifier RF 14-115 603823760 800-2,800 RPM 12.2 US603824751 (kit) US603824752 (kit) 5” Concrete Grinder RS 14-125 2,000-7,000 RPM 12.2 US603824753 (kit) 603824750 (tool only) US603822751 (kit) US603822752 (kit) 5” Concrete Grinder RS 17-125 8,500 RPM 14.2 US603822753 (kit) 603822750 (tool only) 600465620 (kit) 5” Concrete Grinder WE 15-125 HD GED 9,600 RPM 13.5 600465420 (tool only) W 24-230 MVT w/ 7” Surface Prep Kit US606467800 6,600 RPM 15 Dust Control Shroud 4.5”/5” Electronic Variable Speed Angle Grinder WEV 10-125 600388420 2,800-10,500 RPM 9.5 n/a 4.5”/5” Electronic Variable Speed Angle Grinder WEV 15-125 HT 600562420 2,800-9,600 RPM 13.5 Concrete Surface Prep Surface Concrete 6” Electronic Variable Speed Angle Grinder WEV 15-150 HT 600563420 2,000-7,600 RPM 13.5 7” Var. Speed High Torque Dry Polisher PE 12-175 602175420 700-2,200 RPM 10 4”-5” Var. Speed High Torque Wet Polisher PWE 11-1000 602050420 1,700-5,400 RPM 9.6 600408620 (kit) 5" Masonry Cutting / Scoring Tool W 12-125 HD CED 9,600 RPM 10.5 600408420 (tool only) 5" Masonry Cutting / Scoring Tool 600408680 (kit) W 12-125 HD CED Plus 9,600 RPM 10.5 w/ Guide Rollers 600408420 (tool only) W 12-125 HD 600408690 (kit) HD Tuck Point Grinder Kit 9,600 RPM 10.5 Cutting Tuck Point Kit 600408420 (tool only) Masonry 601119520 Wall Chaser MFE 30 9,000 RPM 12 US601119100 (with hose) 1/2” 18V Hammer Drill NEW SBE 18 LTX 600845890 (18V, bare) 1,000/3,000 RPM l 57,000 BPM n/a 3/4” n/a 1/2” Hammer Drill SBE 650 600671420 2,800 RPM l 44,800 BPM 6 5/8" n/a 1/2" Hammer Drill SBE 850-2 600782620 1,100/3,100 RPM l 58,900 BPM 7.7 3/4" n/a 1/2” Hammer Drill SBEV 1000-2 600783620 1,000/2,800 RPM l 53,200 BPM 9 7/8" n/a 1” SDS-Plus Comb. Hammer KHE 2444 606154420 1,230 RPM l 5,400 BPM 7 1” 2.3 1” SDS-Plus Comb. 18V Cordless Hammer KHA 18 LTX 600210890 (18V, bare) 1,100 RPM l 4,000 BPM n/a 1” 2.2 1” SDS-Plus Comb. 18V Cordless Hammer with KHA 18 LTX BL 24 + 600211900 (18V, bare) 1,100 RPM l 4,000 BPM n/a 1” 2.2 integrated dust extraction NEW ISA 18 LTX 1” SDS-Plus Comb. Hammer KHE D-26 601109420 1,230 RPM l 5,400 BPM 7 1" 2.3 1 1/8” SDS-Plus Multi-Hammer UHEV 2860-2 Quick 600713620 900/2,100 RPM l 4,500 BPM 9.6 1-1/8" 3.4 1 1/4” SDS-Plus Combination Hmr. w/Rotostop KHE 3250 600637420 1,150 RPM l 4,470 BPM 8.5 1-1/4" 3.1 (12 chisel settings) 1 1/4” SDS-Plus 36V Cordless 600795520 (36V, 5.2 Ah) KHA 36 LTX 1,100 RPM l 4,450 BPM n/a 1-1/4” 3.1 Combination Hammer 600795840 (36V, bare) 1 1/4” SDS-Plus 2x18V Cordless KHA 36-18 LTX 32 600796840 (2x18V, bare) 1,100 RPM l 4,450 BPM n/a 1-1/4” 3.1 Combination Hammer 1-9/16"- 1 9/16” SDS-Max Comb. Hammer KHE 5-40 600687420 200-350 RPM l 3,200 BPM 10.3 7.5 4" Concrete Drilling & Breaking Drilling Concrete 1 3/4” SDS-Max Comb. Hammer KHE 56 600340420 450 RPM l 2,840 BPM 14 1-3/4"-4" 8.5 2” SDS-Max Comb. Hammer KHE 76 600341420 300 RPM l 2,735 BPM 15 2"-6" 11. 9 2” SDS-Max Comb. Hammer KHE 96 600596420 125-250 RPM l 1,950 BPM 15 2"-6" 20 SDS-Max Demolition / Chipping Hammer MHE 5 600688420 3,000 BPM 13.3 n/a 8.6 (12 chisel settings) SDS-Max Demolition / Chipping Hammer MHE 96 600396420 1,950 BPM 15 n/a 20 (16 chisel settings) *Requires 175 CFM vacuum or more for compliance Auto Clean Vacuum Cleaner ASR 35 ACP Power outlet with auto start #602057420 ASR35 ACP HEPA version meets or #US602057800 (HEPA) exceeds all regulatory standards where the HEPA vacuum is required, allowing Automatic electromagnetic the user to attain the highest level of vibration filter cleaning dust protection on the job-site (Continuous suction) 9GALLON 1400WATTS 130CFM CAPACITY AIRFLOW AMPS MOST ADVANCED INTEGRATED 11 DUSTLESS SYSTEM 5” Concrete Grinder WE 15-125 HD GED • Heavy duty dustless high torque grinder for quick removal rate • Low profile head for easy access to low areas 7” Surface Prep Kit W 24-230 MVT with Dust Control Shroud • High torque - 150 inch lbs. • Metabo anti-vibration handle • Dust collection shroud 5” Masonry Cutting/Scoring Tool Featured Accessory with Guide Rollers US90357031 Universal W 12-125 HD CED Plus wheel mounting kit for non threaded wheels • Dustless concrete cutting / scoring kit • Perfect cutting up to 1-1/16” depth Tuck Point Grinder Kit W 12-125 HD Tuck Point Kit • Dustless tuck pointing grinder kit • Powerful and fastest removal rate especially in hard mortars Concrete Surface Prep / Natural Stone Fabrication / Cutting, Scoring, Pointing CONCRETE / STONE SURFACE PREP 4.5” Handheld Scarifier 5” Concrete Grinder 5” Concrete Grinder 5” Concrete Grinder 7" Surface Prep Kit Electronic Variable Speed Electronic Variable Speed RF 14-115 RS 14-125 RS 17-125 WE 15-125 HD W 24-230 MVT w/Dust 4.5”/ 5” Angle Grinder 6” Angle Grinder GED Control Shroud WEV 15-125 HT WEV 15-150 HT Electronic Variable Speed Variable Speed High Variable Speed High Torque Masonry Cutting/Scoring Tool 5” Masonry Cutting/Scoring Tuck Point Grinder Kit Wall Chaser 4.5”/ 5” Angle Grinder Torque Dry Polisher Wet Polisher W 12-125 HD CED Tool with Guide Rollers W 12-125 HD Tuck Point Kit MFE 30 WEV 10-125 PE 12-175 PWE 11-100 W 12-125 HD CED Plus MASONRY DRILLING 1/2” Hammer Drill SBE 650 • Lightweight and easy to handle • Safety non-slip 360° handle 1/2” Hammer Drill SBE 850-2 • 3/4” Capacity in masonry • 0-58,900 Hard hitting BPMs • Swiveling power cord 5” Masonry Cutting/Scoring Tool with Guide Rollers W 12-125 HD CED Plus • Dustless concrete cutting / scoring kit • Perfect cutting up to 1-1/16” depth 1/2" Hammer Drill SBEV 1000-2 • Safety slip clutch protects user from kickback if the bit jams • Maintains RPM under load • Lock-on switch Masonry Drilling Hammer Drills 1/2” Hammer Drill 1/2” 18V Hammer Drill 1/2” Hammer Drill 1/2" Hammer Drill SBE 650 SBE 18 LTX SBE 850-2 SBEV 1000-2 Amps: 6 Capacity: 1/2" Amps: 7.7 Amps: 9 Capacity: 5/8" RPM: 1,000 / 3,000 Capacity: 3/4" Capacity: 7/8" RPM: 2,800 BPM: 57,000 RPM: 1,100 / 3,100 RPM: 1,000 / 2,800 BPM: 44,800 BPM: 58,900 BPM: 53,200 1-1/8” SDS-Plus Multi-Hammer UHEV 2860-2 Quick • High performance • 4 modes of operation: rotary, chipping, 2-speed drill • Restart protection 1” SDS-Plus Combination Hammer KHE D-26 • Extremely fast drilling for anchoring • Metal gear box for durability • Integrated tool hook for safety • Multiple soft grip surfaces make this our most comfortable rotary hammer yet! CONCRETE DRILLING 1-1/4” SDS-Plus Combination Hammer KHE 3250 KHA 36 LTX (Cordless: 36V, 5.2 Ah) Also available: KHA 36-18 LTX 32 (Cordless: 2x18V, 5.2 Ah) • Metabo 360° VibraTech side handle • Concentrated power and speed • Unique vibration dampening system for maximum end-user comfort Concrete Drilling Rotary Hammers Amps / Capacity / Amps / Capacity / Capacity / Capacity / RPM / BPM RPM / BPM RPM / BPM RPM / BPM 7 / 1” / 1,230 / 5,400 7 / 1” / 1,230 / 5,400 1” / 1,100 / 4,000 1” / 1,100 / 4,000 1” SDS-Plus Comb 18V Cordless Hmr 1” SDS-Plus Combination Hammer 1” SDS-Plus Combination Hammer 1” SDS-Plus Combination 18V Cordless Hammer w/Integrated Dust Extraction KHE D-26 KHE 2444 KHA 18 LTX KHA 18 LTX BL 24 + ISA 18 LTX Amps / Capacity / RPM / BPM Amps / Capacity / RPM / BPM Capacity / RPM / BPM 9.6 / 1-1/8” / 900-2,100 / 4,500 8.5 / 1-1/4” / 1,150 / 4,470 1-1/4” / 1,100 / 4,500 1 1/4” SDS-Plus Combination 1 1/4” SDS-Plus Combination 1 1/8” SDS-Plus Multi-Hammer Hammer with Rotostop 36V Cordless Hammer UHEV 2860-2 Quick KHE 3250 KHA 36 LTX (also avail: KHA 36-18 LTX 32 (2x18V)) CONCRETE BREAKING AND DEMO 1-9/16" Combination Hammer KHE 5-40 • Variable speed and soft start • Fast and light weight • Active vibration control • Unique vibration dampening system for maximum end-user comfort 1-3/4” Combination Hammer KHE 56 • Extreme power! • Drill up to 4” in concrete! • Unique vibration dampening system for maximum end-user comfort Also available 2 x 18V batteries Concrete Breaking Combination and Demo Hammers Amps / Capacity / RPM / Joules Amps / Capacity / RPM / Joules Amps / Capacity / RPM / Joules 10.3 / 1-9/16” - 4” / 200-350 / 7.5 14 / 1-3/4” - 4” / 450 / 8.5 15 / 2” - 6” / 300 / 11.9 1” SDS-Plus Comb 18V Cordless Hmr 1 9/16” SDS-Max Combination Hammer 2” SDS-Max Combination Hammer w/Integrated Dust Extraction 1 3/4” SDS-Max Combination Hammer KHE 5-40 KHE 76 KHA 18 LTX BL 24 + ISA 18 LTX KHE 56 Amps / Capacity / RPM / Joules Amps / BPM / Joules Amps / BPM / Joules 15 / 2” - 6” / 125-250 / 20.0 13.3 / 1,900-3,000 / 8.6 15 / 1,950 / 20.0 1 1/4” SDS-Plus Combination 2” SDS-Max Combination Hammer SDS-Max Demolition / Chipping Hammer SDS-Max Demolition / Chipping Hammer 36V Cordless Hammer KHE 96 MHE 5 MHE 96 KHA 36 LTX (also avail: KHA 36-18 LTX 32 (2x18V)) MADE IN GERMANY Rotary Hammer Consumables PREMIUM QUALITY 2-CUTTER 2 CUTTER & 4 CUTTER SDS-MAX & SDS-PLUS CHISELS SDS-PLUS DRILL BITS SDS-MAX DRILL BITS Order Drilling Total Order Drilling Total Order Total No.
Recommended publications
  • ACCESSORIES CATALOGUE 2016/17 2 Milwaukeetool.Co.Uk
    ACCESSORIES CATALOGUE 2016/17 2 milwaukeetool.co.uk Contents Page No. Abrasives – Coated – Abrasive Paper 108 – 110 – Cutting and Grinding Discs 102 – 103 – Flap Discs 104 Angle Grinder System Accessories / FIXTEC Nut 105 – 107 Band Saw Blades 139 Batteries & Chargers 149 – 150 Biscuit Jointer System Accessories 141 Caulk and Adhesive Gun System Accessories 147 Chisels & Special Application Tools – SDS-Plus 22– 24 – SDS-Max 25 – 26 / 29 – 21 mm K-Hex 27 – 29 Chucks – Keyed & Keyless 84 – 85 – Chuck Adaptors 83 Circular Saw Blades / System Accessories 136 – 138 Cores / Tunnel Bits – TCT – SDS-Plus 12 – SDS-Max 17 – 18 – SDS-Max Vario Extension System 19 Diamond Blades / Diamond Cup Wheels 94 – 101 Diamond Core Bits – Wet Core Bits / System Accessories 86 – 88 – Dry Core Bits / System Accessories 89 – 93 Drill Bits ■ Concrete – SDS-Plus M2 7 – 10 – SDS-Plus RX4 4 – 6 – SDS-Plus Contractor & Multipurpose 11 – SDS-Max 15 – 16 – 21 mm K-Hex 18 ■ Concrete / Masonry (round shank) – Concrete 31 – Concrete Super 32 ■ Multi Material – Multi Material 33 ■ Wood – Auger Impact Rated 34 – Auger 36 – Cable 42 – Flat Boring 41 – Forstner 37 – Lip & Spur 40 ■ Selfeed Bits – Switchblade™ Selfeed 38 – Selfeed 39 – Speed Feed™ 42 ■ Glass & Tile – Glass & Tile 33 ■ Metal – HSS Annular Cutters 59 – HSS-G-Cobalt DIN 338 54 – 55 – HSS-Ground DIN 1897 / Double Ended / DIN 340 52 – 53 / 80 – HSS-Ground THUNDERWEB 50 – 52 – HSS-Rollforged 48 – 49 – Step Drills 56 – 57 ■ Contractor Sets 44 Drill Connect 20 – 21 Drilling System Accessories – QUIK-LOK Cables / Side
    [Show full text]
  • Heating and Drying 1 Day 2 Day 1 Week Plumbing 1 Day 2
    ALL EQUIPMENT + VAT SUBJECT TO AVAILABILTY HEATING AND DRYING 1 DAY 2 DAY 1 WEEK 85 btu Space Heater £20.00 £30.00 £40.00 125 btu Space Heater £20.00 £30.00 £40.00 250 btu Space Heater £25.00 £35.00 £45.00 Cabinet Heater (Gas) * £10.00 £15.00 £20.00 Fire Guard (for above) * £5.00 £5.00 £5.00 Bin Heater 85 btu £20.00 £30.00 £40.00 Patio Heater 10 kg (Gas) £20.00 £30.00 £40.00 Patio inferno Heater 11kg (Gas) £25.00 £35.00 £60.00 Rhino Heater 3 kw Elec £15.00 £22.00 £35.00 Oil Filled Heater 2.5 kw Elec £15.00 £22.00 £35.00 Oil Filled Heater 3 kw Elec £15.00 £22.00 £35.00 Fan Heater ind 3 kw Elec £10.00 £15.00 £20.00 Fan Heater Office 3 kw Elec £6.00 £9.00 £12.00 Ceramic Heater Elec £10.00 £15.00 £20.00 Air Con Unit £35.00 £45.00 £60.00 Pedelstal Fan £10.00 £15.00 £20.00 De-humidifier ( Small) £20.00 £30.00 £40.00 De-humidifier ( Med ) £25.00 £35.00 £50.00 De-humidifier ( large ) £35.00 £55.00 £65.00 Air mover Fan (large) £25.00 £35.00 £45.00 Carpet Dryer £20.00 £30.00 £40.00 PLUMBING 1 DAY 2 DAY 1 WEEK Drain Plugs 4” / 6” £8.00 £8.00 £8.00 Drain rods £8.00 £12.00 £15.00 Drain clean ¼ Worm £8.00 £12.00 £15.00 Stillsons 36” £8.00 £12.00 £15.00 Blow Torch Single £10.00 £15.00 £20.00 DEPOSIT FROM £80 2 X I.D.
    [Show full text]
  • Professional System Solutions for the Construction Trade
    PROFESSIONAL SYSTEM SOLUTIONS FOR THE CONSTRUCTION TRADE. DEMOLITION PREPARATION Cordless DEVELOPMENT THE PARTNER FOR THE CONSTRUCTION TRADE Our close connection to the trade makes all the difference. Based on your daily practical requirements we have improved our tried and trusted products and developed additional problem solvers. Whether demolition, preparation or construction: At Metabo, professionals will find the right tool for almost every application and work stage in the construction process. With Metabo you easily achieve perfect results and have the perfect partner for almost every task. Independence from mains power. Maximum freedom with full compatibility: We also offer you any relevant power tool in a cordless version. Best example: the new cordless dry wall screwdriver range. Metabo‘s battery pack system provides you with sustainable technology for all devices. Dear Readers, Restoration, renovation and modernization are essential construction tasks in the 21st century. Therefore more and more complete professional solutions are required to meet these growing demands. We have been on location and Unparalleled system range. listened closely to professionals all over Europe for this very reason, and Whether you are sanding ceilings with now we are better informed about what you need: reliable solutions in the new long-neck sander or mixing numerous work areas, all from one competent partner. Power tools coating materials with the new stirrers: We call this systematic construction & restoration, i.e. with perfectly coordinated Apart from power tools, we also offer an consumables and system accessories. The best thing about our range is that there is extensive range of system accessories and a cordless version of almost every machine - the future belongs to the battery pack, consumables for the professional user.
    [Show full text]
  • Drilling/Breaking
    DRILLING/BREAKING Tool 1 DAY 2 DAY WEEK 1/2" Pistol Drill 110v £10 £14 £20 Dry Diamond Drill 110v £20 £28 £40 18v Cordless Drill £14 £19.60 £28 36v Cordless Drill £20 £28 £40 1/2" Angle Drill 110v £14 £19.60 £28 Bosch GBH 3-28 DFR Hammer Drill 110v £12.50 £17.50 £25 Collated Screw Gun £21 £29.40 £42 Makita HR4011C Combi Breaker SDS MAX £22.50 £31.50 £45 Bosch GBH 8-45 DV Combi Breaker SDS MAX £23 £32.20 £46 Bosch GBH11 Combi Breaker 110v £25 £35 £50 Bosch GSH16-28 Breaker £27.50 £38.50 £55 Petrol Hydraulic Breaker Pac c/w Hoses £40 £56 £80 CUTTING Tool 1 DAY 2 DAY WEEK 600mm Manual Tile Cutter £20 £28 £40 Bosch GST150 BCE Jigsaw £11 £15.40 £22 Recip Saw 110v £14 £19.60 £28 7" Circular Saw 110v £11 £14 £22 9" Circular Saw 110v £12 £16.80 £24 300mm Mitre Saw 110v £25 £35 £50 Mitre Saw Stand £12.50 £17.50 £25 125mm Angle Grinder £12 £16.80 £24 230mm Angle Grinder 110v £15 £21 £30 Wall Chaser 110v £32.50 £45.50 £65 12" Petrol Cut Off Saw £15 £21 £30 350mm Petrol Floor Saw £30 £42 £60 450mm Petrol Floor Saw £42.50 £59.50 £85 Arbortech AS170 Wall Saw 240V £35 £49 £70 Clipper Tile Saw £22.50 £31.50 £45 SANDING & WOODWORK Tool 1 DAY 2 DAY WEEK IM 350 Paslode Nail Gun £25 £35 £50 IM65A Paslode Nail Gun £25 £35 £50 1/2 Sheet Orbital Sander 110v £10 £14 £20 Random Orbital Sander 110V £10 £14 £20 HT7 Floor Edger 240v £25 £35 £50 HT8 Floor Sander 240v £40 £56 £80 Dewalt 1/2" 110V Router £21 £29.40 £42 Floor Board Nailer c/w Mallet £17 £23.80 £34 Biscuit Jointer110V £22 £30.80 £44 Belt Sander 110V £18 £25.20 £36 POWER & LIGHTING Tool 1 DAY 2 DAY WEEK
    [Show full text]
  • Accelerating Extreme Power Tool Innovation
    Accelerating Extreme Stanley Black & Decker 2021 Growth Summit Power Tool Innovation May 13, 2021 Frank Mannarino | President, Power Tools Group Macro Trends Market DIY End Users Pro End Users Household Formations New Projects Residential — Strong Demand 2.5% 1.6% 1.0% 19YR 3YR 1YR CAGR CAGR Growth New Home Sales Repair & Remodel New Hobbies Commercial — Continued Rebound +7% +4% 2020 2021 2020 2021 Strong, Positive Signs Across Markets And End Users 2021 Growth Summit 2 Arsenal Of Brands Advanced DIYer DIYer Pro & Value Pro Best Portfolio Of Brands In The Industry 2021 Growth Summit 3 World Revolves Around The End User 2021 Growth Summit 4 Cordless System Growth Broad Range Of New Applications Acceleration Of End Users For New Trends Cordless Leadership Home Hobby Advanced DIYer & Lifestyle Sanders Miter Saws GeneralContractor/ Home Remodeler Remodeling Compressors Nailers Home Mechanic Garage Impact Wrenches Ratchets 2021 Growth Summit 5 Cordless System 30 85 Coming Tools Tools Soon Fastest Growing Brand In The Industry… $1B+ In Power Tools 2021 Growth Summit 6 Leverage Our Global Footprint… Accelerated Cordless Growth By 42% Since 2016 2021 Growth Summit 7 LARGEST PRO TOOL BRAND IN THE WORLD 2021 Growth Summit PRO End Users They Want Cordless Brings New Frustrations No Cords Not Enough Power No Hoses Time Wasted Charging No Gas Too Much Theft New Frustrations Driving Innovation… $8B+ Of Growth Opportunities 2021 Growth Summit 9 Investments In Technology Electrical Charging Digital Motors & Electronics Faster Speed Asset Tracking Battery
    [Show full text]
  • Concrete and Masonry
    RSEV 19-125 RT RFEV 19-125 RT r 5” VS face P ep Surface ur Prep Kit S e PE 15-30 M n a T 13-125 to PE 15-20 RT s CED Set S o / n r RSEV 17-125 PWE 11-100 y Set e AS 18 PC HEPA t C e T 13-125 r TuckPoint Set u ASR 35 ACP HEPA c t t n WEV 15-150 HT i n o 7" Surface g T 24-230 MVT C Prep Kit CED WEV 15-125 HT MFE 40 KHE D-26 MHEV 11 BL WEV 11-125 SBEV 1000-2 MHEV 5 BL KHE 3250 C SB 18 LTX BL I o n SBE 850-2 c g r in KHEV 11-52 e SB 18 LTX-3 BLQ I k BL te SBE 650 a e / r KHA 18 LTX BL 24 M B + ISA 18 LTX as & KHEV 8-45 BL onry Drilling KHA 36-18 LTX 32 (2x18V) KHEV 5-40 BL KH 5-40 OSHA COMPLIANT See page 122-123 for vacuum and accessories 112 05 Concrete & Masonry Solutions Full range of OSHA Compliant* dustless solutions (tools, vacuum and shrouds) Specially designed systems to outperform the applications Powerful, light weight tools High torque for demanding applications Wide ranges of available accessories Ergonomically designed *CFR 1926.1153 for respirable crystalline silica 113 1-1/2” x 13’ Anti-static Suction Hose 631370000 METABO COMPLIANT SYSTEMS FLEXIBILITY FOR MEETING OSHA CFR 1926.1153 THE HEART OF MADE IN GERMANY THE DUSTLESS SYSTEM 157 CFM, NO SUCTION LOSS Mode selection dial WHEN IN SELF CLEANING MODE Tool outlet: The vacuum starts and stops Power dial: Adjust to provide automatically when the tool with proper power/amp tool is turned on/off supply Flip door release Durable wheels: Large rear WET / DRY Capable wheels.
    [Show full text]
  • “Out Perform - out Last” Impact Drivers / Wrenches
    Drill/Drivers DS14DVF3 DS14DMR(HS) 14.4v 10mm Cordless Driver Drill 14.4v 10mm Cordless Driver Drill - 10mm keyless chuck - Powerful 50Nm of Torque - 22-stage adjustable clutch for - 13mm Keyless chuck precise torque settings - 22-stage torque adjustment - Maximum torque of 34Nm - Comfortable non-slip grip handle - Soft grip, slip resistant handle - New Super Ni-MH battery - Comes with torch, bit set and 2 x 1.4Ah batteries DS18DVF3 18v 13mm Cordless Driver Drill - 13mm keyless chuck NEW SUPER - 22-stage adjustable clutch for NEW SUPER precise torque setting - Maximum torque of 45Nm NI-MH BATTERY - Soft grip, slip resistant handle - Comes with torch, bit set and MORE POWER. 2 x 1.4Ah batteries MORE LIFE. DS18DVB2 DS18DMR(HS) 18v 13mm Cordless Driver Drill 13mm Cordless Driver Drill - Two speed, variable speed reverse - 2-speed, variable speed reverse - Electronic feedback power control - 13mm keyless chuck - 22-stage torque adjustment - 22-stage torque adjustment - 13mm keyless chuck - Automatic spindle lock & single - High 45Nm torque sleeve chuck for quick bit setting - Electric brake - Powerful fan cooled motor - Soft grip handle & belt hook - High Power 65Nm torque - 2 x 2.0Ah batteries - New Super Ni-MH batteries (available in 2 & 3 battery option) Impact Hammer Drill/Drivers DV14DMR(HS) DV18DMR(HS) 14.4v Cordless Impact Driver Drill 18v Cordless Impact Driver Drill - 22 position torque adjustable clutch - 22 position torque adjustable clutch - Powerful 52Nm of Torque - Powerful 62Nm of Torque - 3 mode selection: Drill, impact drill,driv-
    [Show full text]
  • Milw Acc 2014-15 Running Change 24.6.Indd
    Accessories Catalogue 2014 / 15 2 Contents Page No. Abrasive Paper 99 – 102 Angle Grinder System Accessories / FIXTEC Nut 96 – 97 Band Saw Blades 118 Batteries 146 Biscuit Jointer Accessories 139 Caulk and Adhesive Gun Accessories 143 Chargers 145 Chisels & Special Application Tools – SDS-plus 22 – 24 – SDS-Max 25 – 26 / 29 – 21 mm K-Hex 27 – 29 Chucks – Keyed & Keyless 78 – 79 – Chuck Adaptors 77 Circular Saw Blades / System Accessories 127 – 129 Cores / Tunnel Bits – TCT – SDS-plus 11 – SDS-Max 16 – 17 – 21 mm K-Hex 19 – Universal 12 – 13 Cutting & Grinding Discs 95 Diamond Blades / Diamond Cup Wheels 88 – 94 Diamond Core Bits – Wet Core Bits / System Accessories 80 – 82 – Dry Core Bits / System Accessories 83 – 87 Drill Bits ■ Concrete – SDS-plus 7 – 10 – SDS-plus RX4 4 – 6 – SDS Multipurpose 10 – SDS-Max 14 – 15 – 21 mm K-Hex 18 ■ Concrete / Masonry (round shank) – Concrete 31 – Concrete Super 32 ■ Multi Material 33 ■ Wood – Auger Impact Rated 36 – Auger 37 – Cable 43 – Flat Boring 42 – Forstner / TCT Forstner 40 – Lip & Spur 41 ■ Selfeed Bits – Switchblade™ Selfeed 38 – Selfeed 38 – Speed Feed™ 43 ■ Glass & Tile – Glass & Tile 33 – Diamond Grit 34 ■ Metal – HSS Annular Cutters 57 – 59 – HSS-Cobalt 54 – 55 – HSS-Ground DIN 1897 / Double Ended / DIN 340 51 – 52 – HSS-Ground THUNDERWEB 49 – 50 – HSS-Ground – ¼˝ Hex Step / Cone Drills 53 – HSS-Rollforged 47 – 48 – HSS-G Shockwave – ¼˝ Hex Drills 74 ■ Contractor Sets – 50/100 pc Set 56 Drill Connect 20 – 21 Drilling System Accessories – QUIK-LOK Cables / Side Handles / Right Angle Drill
    [Show full text]
  • CONTRACTORS TOOLS Viewing at Our Reading Premises – Great Knollys Street, Reading, RG1 7HU 9.30 Am – 4Pm on Wednesday 13Th, Thursday 14Th September 2017
    ON INSTRUCTION OF Asset Services and others ONLINE AUCTION OF CONTRACTORS TOOLS Viewing at our Reading premises – Great Knollys Street, Reading, RG1 7HU 9.30 am – 4pm on Wednesday 13th, Thursday 14th September 2017 Bidding starts at 8am on Thursday 14th September and finishes from midday on Friday 15th September 2017 VAT will be added to the hammer price of all lots A buyers’ premium of 10% plus VAT will be charged on all lots An internet premium of 1% plus VAT will be charged on all lots 1 3 Belle petrol minimix 150 chassis 2 Belle petrol mini mix 150 3/5 Belle 110v mini mix 150 6/8 Belle petrol mini mix 150 9/10 Belle petrol plate compactor 11 Wacker petrol plate compactor 12 Belle petrol plate compactor 13 Belle petrol plate compactor 14 MPM 5.200I petrol weldergen 15/21 Honda petrol generator 22 Clarke workshop compressor 23 160 litre Enviro wash wheelie bin 24 Karcher floor sweeper 25 Kroll dehumidifier 26 Rhino industrial fan 27 SPE DFG400 floor grinder 28/30 10kva site transformer 31/36 Belle minimix 150 mixer petrol 37 Belle minimix 150 mixer 110v 38 Belle petrol power float 39/41 Belle petrol plate compactor 42 Wacker DS70 upright rammer 43 Belle petrol plate compactor 44 Stihl BT121 petrol auger 45 Belle diesel plate compactor 46 Wacker diesel plate compactor 47 10kva site transformer 48 5kva site transformer 49/51 10kva site transformer 52/53 Honda petrol water pump 54/61 Honda petrol generator 62/63 Husqvarna FS305 petrol road saw 64 Clipper petrol road saw 65 Husqvarna FS400LV petrol road saw 66 Wacker BS50-2 upright rammer
    [Show full text]
  • Contents Aeg Powertools
    2019/2020 POWERING PROFESSIONALS SINCE 1898 AEG-POWERTOOLS.EU WHEN WE SAY THEY LAST, WE MEAN IT. Best in class longevity. Unmatched power. Professional performance. We’re prepared to put our money where our mouth is when it comes to our range of AEG power tools. That’s why we’ve extended the warranties across our entire power tool range. With an incredible 6 year tool warranty and 3 year guarantee for batteries and chargers, trade professionals trust the legendary durability of AEG. AEG is a registered trademark used under license from AB Electrolux (publ). *Register within 30 days of purchase. See online for more details. CONTENTS AEG POWERTOOLS promises to draw upon its heritage and deliver exciting, high performance, innovative working solutions for the professional tradesmen of today and the future. CORDLESS SYSTEMS 4 – 59 METALWORKING 75 – 82 18 V Power 4 – 47 Small Angle Grinders 76 – 77 12 V Power 48 – 55 Large Angle Grinders 78 – 79 14.4V Power 56 – 57 Die Grinders 81 – 81 Other Cordless 59 – 59 Polisher 81 – 81 Omni Pro 60 – 63 Right Angle Sander 82 – 82 Metal Chopsaw 82 – 82 HAMMER SYSTEMS 64 – 69 SDS-Plus 65 – 66 WOODWORKING 83 – 94 SDS-Max 67 – 69 Circular Saws 84 – 84 Jigsaws 85 – 87 DRILLING SYSTEMS 70 – 74 Router 87 – 87 Percussion Drills 71 – 72 Planer 88 – 88 Rotary Drills 72 – 72 Reciprocating Saws 88 – 88 Diamond Drill 73 – 73 Sanders 89 – 90 Wall Chaser 73 – 73 Heat Guns 91 – 91 Screwdrivers 74 – 74 Mitre Saws 92 – 92 Mitre Saw Legstand 93 – 93 Table Saw 93 – 93 Dust Extraction 93 – 94 ACCESSORIES 95 – 109 4 CORDLESS SYSTEMS BSB 18BL BSB18CBL BKS18BL BKS18 PRO TOOLS.
    [Show full text]
  • Equipment Catalogue
    TREE/BRUSH REMOVAL AND TRIMMING (Continued) DAILY WEEKLY MATERIALS HANDLING Flaring Tool 16 60 Furniture Trailer 10'x 5'- Double Axle 100 350 Sledge Hammer / Log Splitter-Manual 8 15 MOVING AIDS DAILY WEEKLY Pipe Bender Hydraulic 40 180 Car Trailer 14'x 6'6" 105 330 Log Splitter (25 Ton Hydraulic) 130 400 Brick / Block Elevator 6m 95 300 Pipe Dies Manual 24 60 Motorbike Trailer- Triple 65 180 Hedge Cutters Extended up to 3.5m 75 300 Brick / Block Elevator 9m 130 480 Pipe Vice and Stand 15 50 Tilt/ Tip Trailer 1076 DANDENONG85 ROAD250 21-25 COORA ROAD Hedge Cutters Electric 45 110 Chain Block Half-Ton / 1 Ton / 2 Ton / 3 Ton 35 100 Roof Bender “Quicklock” 16 50 Camper Trailer 7'x 4'-Minimum 3 day hire @ $300 for 3 days 100 480 Hedge Cutters Petrol Light 45 110 Cumalong 1.5 Ton 35 80 Stillsons (36'') 20 60 A large range of trolleysCARNEGIE and tie down straps VIC.available 3163 STH. OAKLEIGH VIC. 3167 Hedge Cutters Petrol Heavy Duty 60 110 Forklift gas operated 1.8 ton 110 380 Test Pressure Pump 30 100 VEHICLES DAILY WEEKLY Mulcher (75mm) Chipper 140 400 Forklift Diesel Operated 4.5 tonne 120 400 POWER TOOLS Tip truck 2 tonne PHONE: 9571 9488240 1000 PHONE: 8546 5744 Mulcher (100mm) Chipper 150 400 Garage Jack 1.5 Ton 30 100 SAWS AND TOOLS – METAL DAILY WEEKLY Ute 1 tonne FAX: 9572 156575 300 FAX: 8546 5788 Mulcher (230mm) Chipper (Green Mac) 380 1200 Glass Suckers (Per Pair) 20 55 Grinder 100mm 22 90 WELDERS Pruning and Sawing Tool 16 50 Hand Forklift Electric 1 tonne 80 200 Grinder 225mm Angle – Blades Extra 40 130 ARC / STICK WELDERSEMAIL: [email protected] Stump Grinder Small (Red Roo) 140 480 Machine Skates 20 Ton/PR 50 120 Nibbler 35 110 Welder 160 Amp 240VWEB: www.carnegier45ental.com.au130 Stump Grinder Professional (Toro) 240 750 Piano Trolley (Light Duty) 25 70 SAWS AND TOOLS – TIMBER DAILY WEEKLY ENGINE POWERED WELDERS DAILY WEEKLY BIFALCOBIF Pty ALCOLtd A.B.N.
    [Show full text]
  • ACCESS LADDER 6M Double & Triple Extension….…
    ACCESS DRAIN CLEANER, high pressure water jet… 11 up to 50mm, 5.5hp petrol…………… 13 MISCELLANEOUS LADDER 6m double & triple extension….…. 6 FLOOR CLEANER/POLISHER 240v……..… 10 HEDGE TRIMMER 240v………………….… 7 CARPET KICKER…………………………………...…. 2 LADDER 9m double & triple extension……. 8 PRESSURE WASHER 1500 psi. 240v……. 11 HEDGETRIMMER/SAW long reach, petrol… 11 GENERAL HAND TOOLS……………………………… 1 LADDER 13m triple extension…………..….11 PRESSURE WASHER 2000 psi Petrol……..13 HEDGETRIMMER petrol……………….…… 10 GLASS/MIRROR LIFTER……………………………….2 LADDER STANDOFF BRACKET ……..…… 1 STEAM CLEANER, domestic 240v…...…. 6 KNAPSACK SPRAYER……………….…….. 3 NIBBLER cuts sheet steel up to 1.6mm 240v……….. 10 LADDER STEADY……………………..…….. 1 VACUUM CLEANER……………………….... 5 LAWN SCARIFIER 240v……………………. 7 ROLLER CROW BAR pair, 5t lift……………………….3 LADDER STEP.……………………………..… 3 Domestic model, 240v wet/dry LAWN SCARIFIER petrol…………….……... 12 PALLET TRUCK……………………………….……….. 5 LADDER CLAMPS…………………………….1 VACUUM CLEANER…………………….…… 11 LAWN AERATOR petrol………………………14 TABLES 1.83m folding……………………….………….4 LIGHTWEIGHT STAGING 2.4, 3.6 & 4.8m... 3 Industrial 240v, wet/dry LAWN SEED SPREADER…………….……. 4 WATER BOILER 25litres, LPG……………………….. 4 ROOF LADDER from 3.6m – 6.7m……….... 6 LEAF BLOWER petrol…………………………6 WATER BOILER 20litres, 240v…………………….…..4 SCAFFOLD TOWERS CONCRETING LOG SPLITTER 240v , 8tonne………………12 1.2 x 0.6 x 2.5m…………….……………..….. 6 CEMENT MIXERS petrol or 110/ 240v……. 7 POST DRIVER 100 or 150mm…….……….. 2 MOTORING 1.2/1.8 x 1.2 x 2.7m…… …………………….. 8 CONCRETE POKER 50mm petrol, 6m drive13 POST HOLE BORER BALLJOINT PULLER………………………………...….. 1 1.2/1.8 x 1.2 x 3.6m…………..……….……… 9 CONCRETE POKER 35mm 240v……..…… 9 Petrol , 75 & 600mm augers……….……….11 BOOST STARTER cordless…………………..………...6 1.2/1.8 x 1.2 x 4.4m…………………….…….
    [Show full text]