“Out Perform - out Last” Impact Drivers / Wrenches

Drill/Drivers

DS14DVF3 DS14DMR(HS) 14.4v 10mm Cordless Driver Drill 14.4v 10mm Cordless Driver Drill - 10mm keyless chuck - Powerful 50Nm of Torque - 22-stage adjustable clutch for - 13mm Keyless chuck precise torque settings - 22-stage torque adjustment - Maximum torque of 34Nm - Comfortable non-slip grip handle - Soft grip, slip resistant handle - New Super Ni-MH battery - Comes with torch, bit set and 2 x 1.4Ah batteries

DS18DVF3 18v 13mm Cordless Driver Drill - 13mm keyless chuck NEW SUPER - 22-stage adjustable clutch for NEW SUPER precise torque setting - Maximum torque of 45Nm NI-MH BATTERY - Soft grip, slip resistant handle - Comes with torch, bit set and MORE POWER. 2 x 1.4Ah batteries MORE LIFE.

DS18DVB2 DS18DMR(HS) 18v 13mm Cordless Driver Drill 13mm Cordless Driver Drill - Two speed, variable speed reverse - 2-speed, variable speed reverse - Electronic feedback power control - 13mm keyless chuck - 22-stage torque adjustment - 22-stage torque adjustment - 13mm keyless chuck - Automatic spindle lock & single - High 45Nm torque sleeve chuck for quick bit setting - Electric brake - Powerful fan cooled motor - Soft grip handle & belt hook - High Power 65Nm torque - 2 x 2.0Ah batteries - New Super Ni-MH batteries (available in 2 & 3 battery option) Impact Hammer Drill/Drivers

DV14DMR(HS) DV18DMR(HS) 14.4v Cordless Impact Driver Drill 18v Cordless Impact Driver Drill - 22 position torque adjustable clutch - 22 position torque adjustable clutch - Powerful 52Nm of Torque - Powerful 62Nm of Torque - 3 mode selection: Drill, impact drill,driv- - 3 mode selection: Drill, impact drill,driver er - 13mm keyless chuck - 13mm keyless chuck - Improved cooling efficiency - Improved cooling efficiency - Soft grip handle - Soft grip handle - New Super Ni-MH battery - New Super Ni-MH battery (available in 2 & 3 battery option)

Impact Drivers/Wrenches

WH12DMR(HH) WH14DMR(HS) Cordless Impact Driver 14.4v Cordless Impact Driver - Powerful tightening torque of 130Nm - High durability, dust resistant for long life - Compact & lightweight body - Variable speed in trigger also with - Powerful cooling fan for high-motor durability reverse switch - Light equipped 5 step angle - Double moulded non-slip grip handle adjustable hook - Powerful 140Nm of torque - Replaceable carbon brushes - 1/4” hex drive - Soft grip, slip resistant handle - Angle adjustable hook with light - 1/4” Hex drive - New Super Ni-MH battery

WR14DMR(HS) NEW HITACHI 14.4v Cordless Impact Driver - High durability, dust resistant for long life SUPER Ni-MH BATTERIES - Variable speed in trigger also with reverse switch Now Available on all 14.4v & 18v MODELS - Double moulded non-slip grip handle SUPER Ni-MH - Powerful 200Nm of torque - 1/2” hex drive 5% More Torque - Angle adjustable hook with light 50% More Life - New Super Ni-MH battery “Out Perform - Out Last” Impact Drivers / Wrenches

WH18DMR(HS) WR18DMR(HS) 18v Cordless Impact Driver 18v Cordless Impact Wrench - Powerful tightening torque of 157Nm - Powerful tightening torque of 231Nm - Compact & lightweight body - Compact & lightweight body - Variable speed trigger with reverse switch - Variable speed trigger with reverse switch - Powerful cooling fan for high-motor durability - Powerful cooling fan for high-motor durability - Light equipped 5 step angle adjustable hook - Light equipped 5 step angle adjustable hook - Soft grip, slip resistant handle - Soft grip, slip resistant handle - New Super Ni-MH battery - New Super Ni-MH battery (available in 2 & 3 battery option) (available in 2 & 3 battery option) Sabre Saws / Screwdrivers

WF4DYB CR18DMR(HC) SUPER 12v Cordless Auto Feed Impact Driver 18v Cordless Reciprocating Saw - Removable auto-feed attachment - Slip-resistant soft grip handle - Powerful impact 90Nm of torque - Two-finger sized trigger switch - Variable speed reverse - Flat type battery making it easier to MORE POWER. get into tight spaces - High output of 380W MORE LIFE. - Longest cutting stroke in category - Tough Die-Cast aluminium casing

Combo Kits

KC18DMR(HB) 18v Cordless Combo Kit - DV18DMR -18v Cordless Impact HITACHI Hammer Driver Drill - CR18DMR 18v Cordless SUPER Ni-MH Reciprocating Saw 5% More Torque - C18DMR 18v Cordless Circular Saw - UB18DL 18v Lantern & Charger 50% More Life - 2 Super Ni-MH Batteries (Also available in 3 battery option) “Out Perform - Out Last” Drills

D13 D13VF 13mm High Torque Drill 13mm Variable Speed Drill - Adjustable handles for comfortable - Industrial grade 710 watt motor grip - Heavy duty alloy gear casting - Built for high torque applications - Variable speed reverse - Powerful 720 watt motor - Electric brake - Triple reduction gearing - Keyed chuck - Keyed chuck - Reversible

DMT16 DC120VA 16mm High Torque Drill 120mm Diamond Core Drill - Mechanical two speed gear selector - Electronic soft start & constant - Industrial grade 16mm keyed chuck speed control - “D” handle for comfortable grip - Massively powerful 1,400 watt motor - Powerful 900 watt motor - Synchronised dual variable speed - High 120mm capacity in concrete - Safety release clutch - Robust 16mm chuck

Impact Drills

DV18V DV20VB2 18mm Impact Drill 20mm Impact Drill - Compact & lightweight - Synchronised gear sift mechanism - Soft grip handle for increased comfort - Easy to use mode switching - Powerful 690 watt motor - Easy to handle large trigger - Durable aluminium gear cover and inner - Variable speed and reverse cover - Powerful 790 watt motor - 2-speed, variable - Push button type forward-reverse change over switch “Out Perform - Out Last” Impact Wrench

WR16SA WR22SA 12.7mm Impact Wrench Impact Wrench - Powerful 480 watt motor with - Powerful 850 watt motor with maximum torque of 360Nm maximum torque of 610Nm - Compact & lightweight - Compact & lightweight - Slip resistant and comfortable soft - Slip resistant and comfortable soft grip handle grip handle - Higher durability thanks to metallic - Durable double-insulated motor thanks bearing bushing to the highly strong (rigid) aluminium die-cast body Rotary Hammer Drills

DH24PB3 DH24PC3 24mm Rotary Hammer 24mm Rotary Hammer - Powerful 800 watt motor with top class - Powerful 800 watt motor with top class drilling speed drilling speed - Forward/Reverse changeover switch - Forward/Reverse changeover switch - Idle hammering prevention mechanism - Idle hammering prevention mechanism - Slip resistant, double layer moulded - Slip resistant, double layer moulded gear cover and handle gear cover and handle - 2 mode action: hammer drilling & drilling only - 3 mode action: hammer drilling & drilling only & Hammer only

DH40MR DH45MR 40mm Rotary Hammer Drill 45mm Rotary Hammer - Two mode action; Hammer drilling, - Variable speed control with impact hammer only rate of 1200-2500bpm - Lightweight & powerful - Needle-pin type slip clutch - Soft touch grip for comfort & control - Internal double-insulation construction - Powerful 10 joules per strike rate - High drilling speed & high demolition performance - Powerful industrial 950 watt motor - Change lever for switching between,“Rotary + Hammering”, - Easy adjustable front & side handle “Neutral” & “Hammering only” - SDS-max drive - Soft-touch grip handle and side handle for easier handling Demolition Hammers

H60MRV H65SB2 Demolition Hammer Demolition Hammer - Powerful 1,350 watt motor - Strongest demolition power and durability - Slip resistant soft grip handle in this class - Constant/Variable speed control - Low noise and vibration level - Fast full load stricking rate of 1,650bpm - Triple dust sealed, double insulated design - Vibration-absorbing handle for excellent vibration reduction - Comfortable shock absorbing handles - High chipping and demolishing performance with low vibration - Robust construction for longer life and low noise level - High impact energy: 42 joules - Internal double-insulation construction with sturdy aluminium frame - Strong alloy motor housing Grinders

G10SD2 G12SE2 100mm Angle Grinder 115mm Angle Grinder - Powerful 760 watt motor - Spindle lock for easy to replace - High power to weight ratio grinding wheel - Advanced seal technology - Wear resistant of armature coil - Ergonomic 15O side handle - Excellent overload durability - Compact, lightweight & modern - Powerful 1,200 watt motor - Low profile gearbox allows access - Compact and lightweight to restricted areas

G13SE2 G18SE3 125mm Angle Grinder 180mm Angle Grinder - Spindle lock for easy to replace - Dust proof ball bearing portion & grinding wheel durable retainer - Wear resistance of armature coil - New construction to protect grease - Excellent overload durability leakage - Powerful 1,200 watt motor - Tool-less angle adjustment of wheel guard - Compact and lightweight - Spindle lock 3-position side handle - Prolonged service life and wear resistant - Powerful 2,400 watt motor “Out Perform - Out Last” Grinders

G23SE2(H6) G23UB2 230mm Angle Grinder 230 Angle Grinder - Dust-proof ball bearing - Powerful 2,400 watt motor - Tool-less wheel guard can be - Three position side handle adjusted to any angle - Easy to use large safety lock switch - Long life carbon brushes - Tool-less angle adjustment of wheel - More durable ball bearing retainer guard - Wear resistance of armature coil - Soft start for minimised kick back reaction - Powerful 2,400 watt motor - Dust proof ball bearing portion & durable retainer - Carry case - New construction to protect from grease leakage Sander / Polisher & Grinder

SAT180 GP2 180mm Sander / Polisher 25mm Die Grinder - Powerful 950 watt motor - Compact design for easy access to - No-load speed range: 1900-3400rpm hard to reach locations - Robust construction for longer life - High speed for a smooth and - Two-speed dust sealed switch accurate finish - Dust resistant design - High power from a 520 watt industrial motor - Convenient tool rest

Sanders

SV12SG SB10T Orbital Palm Sander 100 x 610mm Belt Sander - Soft grip for ease of operation & - 2-speed for rapid stock removal & fine reduce operator fatigue finish sanding - Sanding rate best in class - Large belt size for rapid sanding and - Easily accessible switch suits left or stock removal right hand operation - Powerful industrial grade 1,100 watt - Easy and quick paper changing with motor convenient lever clamp - Extended base suitable for flush - Also compatible with velcro backed sand paper sanding

SB75 SV13YA(H1) Belt Sander 125mm Orbital Sander - 2-speed for rapid stock removal & fine - Powerful 230 watt motor finish sanding - Variable speed 7,000-12,000rpm - Efficient dust collection with a large dust - Ergonomic design bag - Large soft grip handle - Powerful industrial grade 1,000 watt - Pad control system motor - Complete ball bearing construction - Extended base suitable for flush sanding for smooth operation

Circular Saws

C5YC C7YA(FCB) Dustless Metal Cutting Circular Saw 185mm Dustless Saw - Lightweight and compact - Convenient dustless operation for user - Multi-purpose cutter safety when used with appropriate - Fast and powerful accessories - Clear view of cutting line - Lightweight & well-balanced for user - Robust and accurate comfort (Comes with 125mm FCB Blade or - Specifically built for cutting fibre-cement Diamond Blade) - 4-tooth, diamond tipped fibre-cement blade - Heavy duty industrial grade 1,400 watt motor C7SB2 C9 185mm Circular Saw 235mm Circular Saw - Easy access adjustment lever with - No saw slump, ideal for saw bench 55O bevel capacity accessories - Magnesium gear cover, blade cover - Powerful industrial 2,000 watt motor and lower guard - Max depth of cut:86mm (3-3/8”) - Soft and comfortable with slip resist - Clear view of cutting line ant moulded grip - Compact and easy to use - Heavy duty die cast aluminium base - Rigid nickel alloy base - Powerful 1,710 watt motor “Out Perform - Out Last” Sabre Saws

CR13VA CR13VC 130mm Reciprocating Saw 130mm Reciprocating Saw - Simple, tool-less, one handed blade - Speed selection dial for versatile changes operation - Comfortable, ergonomic soft moulded - Comfortable dual moulded front cover grip - Comfortable rubber moulded handle - Top of class 1,050 watt industrial motor - Tool-less blade change mechanism - Higher cutting speed with swing action - Large variable speed trigger - Push button adjustable shoe - Powerful 1,010 watt motor - Variable speed control Mitre Saws

C10FCE C12LCH 255mm Compound Mitre Saw 305mm Compound Mitre Saw - Intense power for toughest cutting jobs - Laser guide system for easy adjustment - Horizontal handle with soft, vibration reducing - Digital display panel that indicates mitre and elastomaster grip adds comfort & control bevel angles - Thumb actuated positive stops, easy to use - Bevel angle fine adjustment mechanism for quick mitre adjustments - Soft vibration reducing grip - Carbon brush access, allows user to replace - Powerful 1950 Watt motor brush as needed to greatly prolong tool life

Slide Compound Saws

C12FSA(B) C10FSB 305mm Slide Compound MItre Saw 262mm Slide Compound Mitre Saw - Built-in soft start & electric constant - Built-in soft start & electronic constant speed control speed control - Positive angle stoppers for desired angle cut - Dual slide rails for smooth & accu- - Poly V-belt and motor driving system for longer rate cutting life - Quiet, low vibration belt drive - Splinter guard, also serving for cut alignment - Powerful 1,650 watt motor - Easy to read angle scale and bevel scale - Bevel left and right - Powerful 1,450 watt motor - Mitre angles R:0-57O L:0-57O Cut Off Machines

CC14SF CC16SA 14” Cut Off Machine 405mm Cut Off Machine - Powerful 2400 watt motor - Adjustable angle vice cutting up to 45O - Soft grip handle - Wind up vise with thread protection - Spindle lock system - Large capacity: 120mm pipe - One touch vise system for quick - Double reinforced base feeding and easy tightening - 2,400 watt motor - High speed feeding of the vise

Planners

P20SB(TCT) P20SA2 82mm Finishing Planer 82mm Rebate Planer - Comes with TCT blades - Large capacity rebate of 25mm depth - Highest power to weight ration in its - Lightweight design for user control class - TCT replaceable blades - Maximum pass of 1mm - Comfortable “D” handle - 620 watt motor - 3mm maximum pass - 2.5kg weight - Rigid alloy base

Screwdrivers

W6V4 W6VA4 Screwdriver Screwdriver - High power 620 watt motor - High power 620 watt motor - Ergonomic design for better - Ergonomic design for better operation operation - Robust aluminium cover & inner - Robust aluminium cover & inner cover cover - Class-top low noise 76db - Class-top low noise 76db “Out Perform - Out Last” Screwdriver Vacuum cleaner

W8VB2 RP30Y Screwdriver Vacuum - High power 620 watt motor - Automatic switch outlet for ease of use - Ergonomic design for better - Suitable for wet & dry operation operation - Durable stainless steel casing - Robust aluminium cover & inner - Heavy duty 1,200 watt motor cover - Integrated accessory stands - Class-top low noise 76db

Nibbler Shear

CN16SA CE16SA Nibbler Shear - Fast efficient cutting sped of 1,500 - Large guard for protection from strokes per minute sharp metal waste - Downward punching allows clear view - Fast efficient cutting speed of of line 3,700 strokes per minute - Powerful 480 watt motor - Compact body and lightweight - Adjustable cutting positions for cutting - Powerful 400 watt motor left or right - Large cutting capacity: 1.6mm steel, 1.2mm stainless - Large cutting capacity: 1.6mm steel, 1.2mm stainless Others

RB40VA VB16Y Blower 16mm Rebar Cutter / Bender - Compact and lightweight - Micro-processor controls secures and - Soft grip handle for easier handling stabilises the bending angle of the steel rod - Variable speed control trigger switch - Built-in slip clutch for protection of the - Stable floorstanding operation is possible mechanism - Dust can be collected when using dust bag - Preset dial for bending angles: - Number one in it’s class with maximum 45O, 90O, 135O & 180O air volume:3.83/min - Soft touch handle for comfort and control - Bending capacity: 10-16mm / Cutting capacity: 10-16mm EC12 EC10SB(SL) Air Compressor (Twin Tank) Air Compressor (oil-less) - Small,l compact & portable - Oil-free compressor - Low maintenance - Small, compact & portable - 15.1 Litre tank capacity - Low maintenance - Rubber suction pads for stability in - 15.1 Litre tank capacity transport - Powerful motor with a 2HP single phase - Supplied with Nitto Coupling 240v motor - Grab handle is easy to carry for mobility - Supplied with Nitto Couping Pneumatics

NR90AD NT65MA2 90mm D Head Strip Nailer DA Series Brad Nailer - Revolutionary Lightweight & compact - Revolutionary on board air duster design - 360 degree adjustable exhaust - Well balanced clip head nailer - Lightweight and high power - Rear load magazine with by pass - Tool-less depth adjustment follower - Dual function trigger - Tool-less depth adjustment - Quick clear feature - Dual function trigger (bump/single shot) - Moulded rubber grip for comfortable handling NV65AF3 Coil Nailer - Light, compact and powerful “Ensure Optimum Performance” - Wire or plastic collated nails - Sequential or contact fire - Dial depth adjustment “Use HITACHI Designed - Clear view magazine with adjustable nail support Collated Fastener” - Non-slip grip handle FULL RANGE OF NAILS ALSO AVAILABLE “Out Perform - Out Last” 3612 12.7mm Plunge Router 6408 10mm Electric Drill

• A tough, powerful and robust router • Lightweight and powerful this drill is a • Handles anything from MDF to red must for carpenter/joiners, shop ﬁtters gum and iron bark and cabinet makers • Shaft lock for easy bit changes • Variable speed with forward/ • 3-way preset plunge depth stop reverse for easy drilling and driving • Low noise (84db) applications • Heavy duty 10mm keyless chuck • Compact design for working in conﬁned areas

3706 Cutout Tool 6501 6.5mm High Speed Electric Drill

• Designed to help you cut quick, • Fast rpm (4,500) makes this ideal for accurate and smooth curves or holes drilling pop rivets and pilot holes in • Fits in the palm of your hand giving metal channel you comfortable accurate control • Adjustable depth guide allows you to • Tool-less depth adjustment sets the drill to a predetermined depth desired cutting depth quickly and • All ball and needle bearing easily construction for longer tool life • Clean cuts with optional extraction • Compact pistol grip design head

3901 Plate Joiner 6821 Drywall Screwdriver

• 6 depth settings for #0, #10, #20 • ”Sure-Lock” adjustment for consistent biscuits screw depth setting • A professional joiner with precision • Low noise level for quieter operation grooving, ﬂat dowel joints and wall/ • Nose piece is easy to remove for ceiling capabilities reversing screws out • The base is set up to work with 19mm • Highest power-to-weight ratio on the material without adjustment market • Optional 110mm 24t blade will give • Large recessed lock-on button for you 25mm depth of cut continuous operation also helps prevent accidental lock-on

4131 185mm Cold Metal Cutting Saw 6825 Drywall Screwdriver

• Fast, effortless cutting through metal • The fastest drywall driver on the with burr-free cuts that are cool to market at 6,000rpm touch • ”Sure-Lock” adjustment for consistent • Virtually spark free cuts screw depth setting • Cuts up to 6mm thick mild steel • Lightweight design (1.4kg) reduces • Quick release blade guard lever for operator fatigue during extended use plunge cutting • Large recessed lock-on button for • Stainless steel base plate for stability continuous operation also helps and durability prevent accidental lock-on • Excellent for roof and fence sheeting

446L Dust Extraction System 6826 Screwdriver

• 27 litre tank • State of the art in general ﬁxing • New “Push & Go” ﬁlter cleaning applications with silent clutch for system speed and torque • Dual purpose machine easily converts • ”Sure-Lock” adjustment for consistent from dust extraction to a powerful wet screw depth setting or dry industrial vacuum cleaner • Variable speed • Automatic on/off system operates • Large recessed lock-on button for simultaneously as connected tool is continuous operation also helps switched on prevent accidental lock-on

447L Dust Extraction System 6827 Screwdriver

• 46 litre tank • 6 stage externally adjustable torque • New “Extreme Clean” automatic ﬁlter sensitive clutch mechanism cleaning system • ”Sure-Lock” depth adjustment for • Dual purpose machine easily converts consistent screw depth setting from dust extraction to a powerful wet • Lightweight cast aluminium gear or dry vacuum cleaner housing for durability • Automatic on/off system operates • Retractable belt clip simultaneously as connected tool is • Conveniently located forward/reverse switched on switch

Page 28 United Tools National Catalogue 2006 6952 Impact Screwdriver 3612C 12mm Electronic Plunge Router

• This impact screwdriver delivers • Dial up variable speed 120 Nm of torque • Soft start feature for smoother start • Rev speed of 3,200rpm means ups and electronic brake increased work efﬁciency • Electronic speed control maintains • Lightweight cast aluminium gear constant speed even under load housing for durability • Optional dust extraction assembly

2414NB-2 355mm Portable Cut Off 3620 8mm Plunge Router

• Lock off button to prevent accidental • Great router for all round performance, starting plunging and template work • Guide plate adjusts 45° right and • Comfortable grips with the switch built left at 3 locations for various sizes of in for precise and accurate control materials • 1,000 Watt motor gives this machine • Quick release vise for secure stock plenty of power retention and fast repeated cut offs • 3 way preset plunge depths • Adjustable depth stop • Easy guide adjustment setup • Includes 5 abrasive discs and cap

2704 Table Saw 3707F 6.35mm Trimmer

• Machined saw table with high rigidity • Ergonomic slim body design for su- delivers accurate cutting work perior handling and reduced operator • Powerful motor enables ripping 4 x 8” fatigue wood with telescopic sub-table • Rubber roller for easy and precise • Rip fence with very smooth sliding depth adjustment and cam action movement with anti-lifting T shaped locking rail • Built-in Maklite for easy trimming • Side and rear extension tables when lighting is inadequate! available as option

AF633 Pneumatic Brad Nailer 4101RH 110mm Wet Cutter

• Durable and lightweight die cast • Perfect saw for cutting tiles, bricks housing and concrete • Easy tail loading of nails and easy dial • Powerful and durable motor for depth adjustment longer life • Comfortable rubber grip • Equipped with earth leakage breaker • Large magazine capacity - 120 pcs • Special cover design prevents water • Available in collation 34° from entering into motor housing • Cutting capacity up to 34mm with standard 110mm blade

AN611 Coil Nailer 4107RH 180mm Wet Cutter

• 3 way firing switch; safety lock, • Wet cutting capability and a powerful bounce fire and standard single fire 1,400W motor allows quick and clean • Tool-less fine depth adjustment for cutting of stone, concrete and asphalt recessing heads or raised • Waterproof construction • 360° rotational exhaust port to deflect • Equipped with earth leakage breaker air away from operator • Spiked nose cone firmly grips material while skew or toe nailing • Accepts plastic and wire collated nails

AN942 Pneumatic Framing Nailer 4112 305mm Portable Angle Cutter

• 3 way firing switch; safety lock, • SJS mechanism delivers outstanding bounce fire and standard single fire performance and durability • Tool-less fine depth adjustment for • Detachable and adjustable solid metal recessing heads or raised base plate ideal for cutting 100mm • 360° rotational exhaust port to deflect in depth air away from operator • Large dead man switch for safer • Spiked nose cone firmly grips material operation and less fatigue while skew or toe nailing • Dust exhaust shute • Accepts plastic and wire collated nails • Tool-less adjustable wheel guard

United Tools National Catalogue 2006 Page 29 The future is now. Battery-powered tool technology has come a long way in the last few years – and Makita Mobile is definitely the future. Now, mobile tools can develop tons of power, run for longer and recharge in less time. There’s also more choice. With the Makita Mobile range of technology and voltage platforms, you can pick the perfect balance of tool power, size and weight to suit your work.

Option 1. The Skins Option 2. The Kit Option 3. The Combo

If you’re well set up with a particular You’re on familiar ground here… Each kit When you want more power, Combos are the ideal Makita Mobile voltage platform, gives you a new tool, packaged up with shortcut. You can grab all the essential tools for you may own enough batteries and batteries and a charger in a self-contained your new mobile voltage, boxed (or bagged) up with chargers already. And that’s when you set. batteries and a charger. You save because you’re have the option to just grab a Skin. It’s not buying all the tools individually, and you’re not just your new tool. So you can save paying for more batteries and chargers than you because you’re not paying for more really need. batteries and another charger.

6260DWLE 9.6V 10mm Mobile Driver Drill 8414DWAE 12V 13mm Hammer Driver Drill

• Perfect for ﬁtting door furniture, • The newly redesigned clutch lock kitchen cupboard work, joinery and out lever lets you to switch between general ﬁtout jobs hammer drill, drill and drive modes • 2 speed gear box let’s you choose without losing your clutch setting between speed and power • State-of-the-art two piece ND-31 • 16 torque settings for precise screw Makita motor depth setting, prevents driving of • Clutch lock system screws deeper than surface • Single sleeve keyless chuck • Includes 2 x batteries, case and torch

6270DWLE 12V 10mm Mobile Driver Drill 8434DWAE 14.4V 13mm Hammer Driver Drill

• Perfect for ﬁtting door furniture, • The newly redesigned clutch lock out kitchen cupboard work, joinery and lever lets you to switch between ham- general ﬁtout jobs mer drill, drill and drive modes without • 2 speed gear box let’s you choose losing your clutch setting between speed and power • State-of-the-art two piece ND-31 • 16 torque settings for precise screw Makita motor depth setting, prevents driving of • Clutch lock system screws deeper than surface • Single sleeve keyless chuck • Includes 2 x batteries, case and torch

6280DWLE 14.4V 10mm Mobile Driver Drill 8444DWAE 18V 13mm Hammer Driver Drill

Page 30 United Tools National Catalogue 2006 6980FDWAE 12V Mobile Impact Driver 6349DWAE 18V 13mm Mobile Driver Drill

• Externally accessible replaceable • 13mm single sleeve keyless chuck carbon brushes • Wrap around rubber handles for all • Soft ﬁtting rubber clad palm grip day comfort and control • Fully recessed screws in the hammer • 16 torque settings casing • Variable speed and forward/reverse • The brilliant LED Maklite will make switch ﬁtting screws under stairs or inside a cabinet a breeze

BDF460WAE 24V 13mm Mobile Driver Drill 6835DWAE 12V Mobile Screwdriver

• Replaceable brushes extends motor • Auto feed screwdriving life by up to 5 times • Easy 3 stage screw adjustment range • Variable speed plus reverse from 25mm to 41mm screws • 2 speed gear box • Newly designed narrow housing • Heavy duty keyless chuck allows driving 15mm from internal • Electric brake for accurate driving right angle walls (corners) • 16 torque settings for precise screw • Fast loading and unloading screw depth system with screw strips holding 50 screws

BHP460WAE 24V 13mm Hammer Driver Drill 6934FDWAE 14.4V Mobile Impact Wrench

• 3 mode dial for hammer, driver and • Lightweight and compact body for drill action superior handling • Replaceable brushes extends motor • Powerful 120Nm of torque to take on life by up to 5 times the toughest jobs • Variable speed plus reverse • The clever Maklite located at the head • 2 speed gear box of the tool will provide bright white • Electric brake for accurate driving light right into where you are working, • 16 torque settings for precise screw lighting up even the darkest corners depth

BHR200SJE 24V 20mm Rotary Hammer 6935FDWAE 14.4V Mobile Impact Driver

• Great tool for hard drilling applications • Externally accessible replaceable where you don’t want to drag a lead carbon brushes around • Fully recessed screws in the hammer • Intelligent charging system for efﬁcient casing charging and increased battery life • The brilliant LED Maklite will make • 3 mode rotation only, rotation with ﬁtting screws under stairs or inside a hammer and hammer only cabinet a breeze • Centre line balance • Forward/reverse with variable speed • Variable speed with reverse • Rubber clad handle • Electric brake • 2 piece motor

6319DWAE 12V 13mm Mobile Driver Drill DK1840AL3 18V 4 Piece Mobile System

• 13mm single sleeve keyless chuck System includes: • Wrap around rubber handles for all • 8444D MXT Hammer Driver Drill day comfort and control • JR180D Recipro Saw • 16 torque settings • 5620D Circular Saw • Variable speed and forward/reverse • ML180 Swivel Head Torch switch • 3 x 2.0Ah Ni-Cd Batteries • Charger

6339DWAE 14.4V 13mm Mobile Driver Drill DK1842AL3 18V 4 Piece Mobile System

United Tools National Catalogue 2006 Page 31 DK1860AL3 18V 6 Piece Mobile System 5902B 235mm Circular Saw

System includes: • 2,100W motor • 8444D MXT Hammer Driver Drill • Hardworking saw with the power to • JR180D Recipro Saw rip through most timbers • 5620D Circular Saw • Tight gear tolerances minimise arbor • 4334D Jigsaw ﬂoat and noise • UB181D Blower • Easy to use height adjustment lock • ML181 Swivel Head Radio Torch lever • 3 x 2.0Ah Ni-Cd Batteries • Front and rear bevel locks • Charger • Improved handle design

DK1861AL3 18V 6 Piece Mobile System 5007NB-2 185mm Circular Saw

System includes: • Heavy duty 1,500W motor • 8444D MXT Hammer Driver Drill • Thickened gauge, fully calibrated • JR180D Recipro Saw aluminium base for excellent stability • 5620D Circular Saw and accuracy • 4334D Jigsaw • Durable and robust design with all • UB181D Blower needle and ball bearing construction • ML181 Swivel Head Radio Torch for long tool life • 3 x 2.0Ah Ni-Cd Batteries • Excellent saws for ripping and • Charger crosscut, in the workshop or onsite • Includes blades, tool bag and cap

9059K-2 230mm Angle Grinder 5057KB 185mm Dustless Circular Saw

• Power packed tool with torque limiter • Dust collection container captures • Deadman switch for user safety waste for a clean work environment or • Rotatable solid alloy gear housing can be connected to a dust extraction • Dust proof bearings and resin coating system on critical parts improves durability • Standard blade cuts 4-6mm exterior • Automatic cut out brushes ﬁbre cement sheet cladding • Includes 3 x grinding discs, case and • Bevel cuts 0°-45° enabling a wide cap variety of cuts • Fully enclosed upper guard

9069SP Medium Industrial Angle Grinder 5740NBSP 185mm Circular Saw

• Large dead man switch for user safety • Thin kerf blade cuts through all grades • Compact low proﬁle gear housing of timber even hardwoods great for working in tight areas • Improved handle design gives great • Gear housing can be rotated to balance suit different cutting and grinding • Bevel lock to 45º operations • Calibrated aluminium base for • Dust proof bearings and resin coating increased accuracy on critical parts improve durability • Includes extra Makedge blade • Adjustable wheel guard

9207SPB 180mm 2 Speed Sander Polisher N5900B-2 2000W 235mm Circular Saw

• Perfect addition for automotive repairs • Fine gears and bearings tolerances for and general sanding work quieter, more accurate running • 2 speed to allow for use as a sander or • Repositioned fan vent, to blow the a polisher cutting line clean • All ball bearing construction for long • Cutting window, to give you a clear life and smooth operation view of your line and the blade • Reversible side handle to suit • Great balance and standard base operators preference dimensions to ﬁt your old workbench • Cast alloy gear housing for durability • Includes cap and extra blade

9227CB 180mm Sander Polisher N3701 6.35mm Trimmer

• Electronic speed control maintains • Ideal for trimming laminates, edging, constant speed under load, critical for freehand and template design work a professional finish • Clear base plate allows you to perform • Perfect for clear coat finishes precise cutting for a perfect finish • Variable speed with preset stepped • Robust and durable aluminium speed dial, ideal for ultra slow housing polishing • Hook and loop base for wool bonnet

Page 32 United Tools National Catalogue 2006 SJS is a massive advance 9557NB 115mm Angle Grinder in power, safety and durability. • Powerful 840W motor • Durable motor with patented zigzag The design gives varnish and resin coat on critical parts increases tool reliability maximum transfer of • 90° left and right head rotation power and torque, while • Side switch conveniently located minimising the wear and • Side handle can be used in left or right tear that happens with handed position • Shaft lock for easy wheel changes older technology.

Plus it disengages under extreme loads, protecting the user and the machine. 9558NB 125mm Angle Grinder • Powerful 840W motor ...and it’s only inside Makita high powered angle grinders. • Durable motor with patented zigzag varnish and resin coat on critical parts increases tool reliability SJS is an advanced drive system, based on a • 90° left and right head rotation coil spring which wraps around the internal • Side switch conveniently located drive spindle. • Side handle can be used in left or right handed position • Shaft lock for easy wheel changes

On start-up, the coil tightens around the spindle to produce smooth, direct and highly efficient drive from the motor to the grinder disc. 9564C 115mm Angle Grinder

• SJS mechanism delivers outstanding performance and durability • Electronic limiter prevents accidental If the grinder ‘grabs’ or overloads the motor, motor overload and burnout the SJS is instantly disengaged by the reversed • Dust proof bearings, zigzag and resin force and the drive spindle rotates freely. coated on critical parts • Slim body design for comfortable grip and control • Shaft lock for easy wheel changes • Solid aluminium gear housing

9553NBK 710W 100mm Angle Grinder 9565C 125mm Angle Grinder

• 710W motor • SJS mechanism delivers outstanding • Ideal for domestic or light industrial performance and durability use • Electronic limiter prevents accidental • Durable motor with patented zigzag motor overload and burnout varnish and resin coating on critical • Dust proof bearings, zigzag and resin parts increases tool reliability coated on critical parts • Includes 6 grinding discs and case • Slim body design for comfortable grip and control • Shaft lock for easy wheel changes • Solid aluminium gear housing

9555NBK 710W 125mm Angle Grinder 9565CN 125mm Angle Grinder

• 710W motor • Deadman switch • Ideal for domestic or light industrial • Super Joint System (SJS) delivers use outstanding performance and • Durable motor with patented zigzag durability varnish and resin coating on critical • Electronic limiter prevents accidental parts increases tool reliability motor overload and burnout • Includes 5 x grinding discs and case • Dust Proof Bearings, zigzag varnish and resin coated on critical parts to improve durability

9556NB 100mm Angle Grinder 9565CV 125mm Angle Grinder

• Powerful 840W motor • Dial up variable speed for precise • Durable motor with patented zigzag speed control varnish and resin coat on critical parts • Super Joint System (SJS) delivers increases tool reliability outstanding performance and • 90° left and right head rotation durability • Side switch conveniently located • Electronic limiter prevents accidental • Side handle can be used in left or right motor overload and burnout handed position • Dust Proof Bearings, zigzag varnish • Shaft lock for easy wheel changes and resin coated on critical parts to improve durability

United Tools National Catalogue 2006 Page 33 9032 6mm, 9mm, 13mm Belt Sander BO4553 1/4 Sheet Palm Sander

• The perfect sander for filing out • Ideal for close edge work housings or delicate work • Dust bag for clean and efficient • Head adjustment 110° for easy sanding and can connect to dust handling extraction system • Variable speed control • All ball bearing construction for • Can be connected to dust extraction smooth operation system • Palm grip design for comfort and • Low profile belt head, 14mm control • Optional 6mm and 12mm arms and belts available

9403 100mm Belt Sander BO4561 Triangular Base Palm Sander

• Excellent for floor sanding, cleaning • Precision sanding action for confined and smoothing off table and bench areas tops • Perfect for sanding louver doors, • Extremely powerful and robust windows or any hard to reach areas • A fast belt speed of 500m/min so it • Highly efficient through the pad dust will rip through any timber quickly and collection with dust bag or can be efficiently connected to dust extraction system • Takes standard size belts 100 x 610mm • Fast and smooth operating action for convenience

1902SP 82mm Planer BO4900V 1/2 Sheet Finishing Sander

• A sturdy, robust planer for all trade • Integrated through the pad dust applications control with paper waste bags or • Powerful 580W motor connect to dust extraction system • Standard mini reversible TCT blades • Dial up electronic variable speed that provide a razor sharp long control cutting life • Hook and loop base pad that suits all • V-groove chamfering guide 9mm ﬁxed common papers rebate capability • Reduced vibration for the operator • Includes a set of blades with Makita’s unique counter balancing system

BO3700SP 1/3 Sheet Finishing Sander BO5021 125mm Random Orbital Sander

• Powerful and lightweight for coarse • Sure grip hook and loop base provides sanding of stock, through to fine quick paper changes finishing and preparation for paint or • Dial up variable speed lacquer • Very low vibration • Highly efficient through the pad dust • Through the pad dust extraction collection with removable dust bag or • Connects directly to dust extraction connect to dust extraction system system or dust bag • Improved base system reduces • Detachable front handle for working in vibration confined areas • Includes 9 abrasive sheets and punch plate 9910SP 76mm Belt Sander BO6030 150mm Random Orbital Sander

• Ideal for stripping back paintwork on • Variable speed control weatherboards, furniture, etc • Efficient through the pad dust • Auto tracking system constantly keeps extraction for a cleaner working the belt centred environment • Compact body design makes it ideal • 3mm orbit diameter provides a swirl for flush finishing free finish • Efficient built in dust extraction system • Ergonomic rubber clad rear handle with bag provided or connects directly • Connects directly to dust extraction to dust extraction system system or dust bag

9924DB 76mm Belt Sander BO6040 150mm Random Orbital Sander

• This sander has the versatility to use • Dual mode selector for ‘random orbit’ both 76mm and 100x610mm belts action (ﬁnishing) and ‘random orbit • Excellent for ﬂoor sanding, cleaning with rotation’ action (coarse and and smoothing off table and bench polishing) tops and can be connected to dust • Variable speed control extraction system • Very low vibration • Fine adjustment tracking • Recommend this sander to be • Large lever for quick belt changes connected to dust extraction system • Graphite pad for reduced belt wear and reduced heat in the sanding area

Page 34 United Tools National Catalogue 2006 DA3010F 10mm Angle Drill DP4001K 13mm Drill

• Ideal for close quarter or right angle • Aluminium gear housing for durability drilling or driving and longer tool life • Paddle switch for easy one handed • Large variable speed trigger with operation forward/reverse action • Variable speed (0-1,400) for controlled • Lock-on lever allows the drill to be drilling locked at max. rpm with the ﬂick of • Handy Maklite feature lights up those a lever dimly lit work areas • Side handle swivels 360° for • Forward/reverse action convenient operation

DA3011F 10mm Angle Drill DP4003K 13mm Drill

4323 Jigsaw GB600 150mm Bench Grinder

• Powerful 400W motor • Ideal for the home workshop • Smooth and quiet cutting with • Complete with protective shields and anti-vibration tool rests • Comfortable D-handle design • 150mm 180W bench grinder • Adjustable speed dial for greater • 2.0 Amp 1/3Hp accuracy for a wider range of applications • Bevel cuts to 45° left or right • Can be connected to dust extraction system

4340CT Jigsaw GB601 150mm Bench Grinder

• Powerful 720W motor • Ideal for the home workshop • Variable speed control with constant • Complete with protective shields and speed electronics tool rests • 3 mode oscillating feature allows • 150mm 240W bench grinder faster cutting • 2.5 Amp 1/2Hp • Accepts bayonet shank blades • Adjustable aluminium base for bevel cutting • Ergonomic design D-handle

4341CT Jigsaw GB800 205mm Bench Grinder

• Powerful 720W motor • Check out this 540W machine which is • Variable speed control with constant perfect for light industrial applications speed electronics • Complete with protective shields and • Extremely low vibration tool rests • 3 mode oscillating feature allows • 4 Amp and 3/4Hp faster cutting • Built in dust blower • Tilting base that cuts up to 45° • Barrel handle design

HG1100 Heat Gun HG1100KIT Heat Gun Kit

• 2,000W of ﬂameless heat • 2,000W of ﬂameless heat • Variable temperature control • Variable temperature control 100° -600°C 100° -600°C • 2 speed blower fan • 2 speed blower fan • Perfect for stripping paint, varnish and • Perfect for stripping paint, varnish and many other applications many other applications • Ceramic core protects the heating • Ceramic core protects the heating element, ensures a longer working life element, ensures a longer working life

United Tools National Catalogue 2006 Page 35 HL500 Heat Gun HR2020 20mm Rotary Hammer

• Great for general purpose work • 2 mode operation rotary hammer in • 1,500W of ﬂameless heat masonry, standard drilling in other • 2 temperature ranges materials (optional chuck adaptor and • 2 air speed settings chuck) • Ceramic core protects the heating • Positive slide lock chuck accepts all element – ensures a longer working SDS type bits life • Variable speed with reverse • Unique body design allows the gun to • Torque limiter to protect the tool and stand upright for no hands operation operator if the bit should jam

HM1304 Demolition Breaker HR2450 24mm Rotary Hammer

• Powerful 1,500W motor • 2.7 joules • Accepts 30mm hexagonal bits • Versatile 3 mode operation for rotary • Convenient lock-on button for hammer, hammer only in masonry, continuous operation standard drilling in other materials • Secure locking bit system (optional chuck adaptor) • Internal ‘O’ ring ﬁts around the end of • Chuck accepts all SDS type bits the bit to ensure damaging masonry • Variable speed with reverse dust is kept out of the cylinder

HP1620KSP 13mm Hammer Drill HR2450FT 24mm Rotary Hammer

• Extremely light, compact and a • 2.7 joules powerful 650W motor • Versatile 3 mode operation for rotary • The reversing system ensures full hammer, hammer only in masonry, power in both forward and reverse standard drilling in other materials • Large trigger switch for easy operation (optional chuck adaptor) • Ergonomic in-line design for maximum • Chuck accepts all SDS type bits power, control and comfort • HR2450FT comes standard with SDS • Side handle swivels 360° chuck and keyless drill chuck • Includes 9 piece bit set and case • Maklite built into the handle casts light directly onto the work area

HP1621KSP 13mm Hammer Drill HR3000C 30mm Rotary Hammer

• Extremely light, compact and a • 5.3 joules per impact powerful 650W • 3 mode dial selects hammer, drill or • The reversing system ensures full hammer drill power in both forward and reverse • Variable speed control dial • Large trigger switch for easy operation • Auto cut out brushes and service • Ergonomic in-line design for maximum indicator light minimises down time power, control and comfort and maximises motor life • Keyless chuck • Includes 9 piece bit set and case

HP2051 20mm 2 Speed Hammer Drill HR4000C 40mm Rotary Hammer

• These power packed hammer drills • Electronic variable speed control dial will take on the most demanding jobs • Soft start electronic switch with ease • Automatic cut out brushes with service • Built in torque limiter reduces risk of indicator light and torque limiter damage to the drill and operator if the • 2 mode operation – rotation with bit jams hammer and hammer only • 2 speed gearbox with forward/reverse • D-handle for chiselling and straight • Keyless chuck handle for drilling

HP2071F 20mm 2 Speed Hammer Drill HR5001C 50mm Rotary Hammer

• Super powerful 1,010W motor • Power packed to handle drill bits • 2 speed mechanical gearbox up to 50mm diameter with 2 mode • Variable speed trigger and electronic operation – rotation with hammer and speed adjusting dial hammer only • A torque limiter to protect you and the • Electronic soft start with a large 3 tool from damage ﬁnger trigger to reduce fatigue during • Built-in Maklite casts a light onto prolonged work the drilling area when lighting is • Automatic cut out brushes with service inadequate indicator light and torque limiter

Page 36 United Tools National Catalogue 2006 HK0500 Power Scraper HM1400 Electric Breaker

• Powerful 550W motor with 2,000– • Hard hitting reliability in a comfortable 3,500bpm for maximum performance T-grip design • 12 position bit adjustment • Air cushioned system prevents • Variable speed control dial excessive vibration and allows greater • Large and comfortable trigger switch operator comfort • One touch sliding chuck for easy bit • Automatic cut out brushes installation and removal • 30mm hexagonal bit shank • Auto idle will only hammer when the bit is in contact with the material

HK1810 Power Scraper HM1810 Electric Breaker

• For light scraping, chiselling and • Lowest vibration in its class chipping; ideal for remodelling or • AVT counter weight mechanism helps renovation work to reduce vibration • Air cushion hammering for long tool • Auto cut-off brushes life • Warning light indicates trouble with • Quick change bit retainer cord • Automatic cut out brushes • 28.6mm Hex shank • All ball bearing construction for longer tool life • Variable speed

HM0860C Demolition Hammer JN1601 1.6mm Nibbler

• Full wave electronic variable speed • Clean and precise work in keystone and power control plate, deck plate and other corrugated • 12 joules per impact power sheet materials • Spade or chisel can be locked into • Die rotates 360° 12 different positions • Ergonomic, slim body design for easy • Automatic cut out brushes gripping • Warning indicator light lets you know • Lock on sliding switch for continuous when the tool requires servicing use • Built-in thickness gauge for convenience

HM1100C Demolition Hammer JN3200 3.2mm Nibbler

• Powerful 1050 watt motor • Built-in thickness gauge for • 16 angle settings for chisel bits convenience • Rubber cladded rear and side handle • Easy punch and die replacement for for reduced vibration less down time • Automatic brush cut-out system • Powerful 820W motor allows cuts • Soft start feature through 3.2mm mild steel • Service indicator lamp • Cutting line and blade action easily • Hammer idling mode visible • Slide on and off switch

HM1202C Demolition Hammer JR3050T Recipro Saw

• Large capacity SDS Max demolition • A huge new 1,010W motor hammer for speed, durability and • Strokes-per-minute have been comfort increased by almost 20% • Electronic speed adjusting dial • Minimal vibration • Powerful 1,450W motor to handle the • A bigger variable speed trigger with most demanding jobs lock-on button • 12 angle settings for bit position • Push in tool-less blade change system • Automatic cut out brushes with service with quick release indicator light

HM1304 Demolition Breaker JR3070CT Recipro Saw

• Powerful 1,500W motor • Featuring AVT counter weight • Accepts 30mm hexagonal bits mechanism which helps reduce • Lock-on button for continuous vibration operation • Preset dial for speed control for • Secure locking bit system optimal stroke speed for application • Internal ‘O’ ring ﬁts around the end of the bit to ensure damaging masonry dust is kept out of the cylinder

United Tools National Catalogue 2006 Page 37 JS1300 1.3mm Straight Shears LS0714 190mm Slide Compound Saw

• 360° swivel shear head for increased • Four steel slide arms on linear bearings manoeuvrability move in two stages, to give this • Large variable speed trigger for 190mm saw a massive 300mm width controlled cutting speed of cut • Brushes are easily accessible for fast • 1,010W motor replacement • Bevel cuts up to 45° left or 5° right • Lock on button for continuous perfect when you are undercutting operation boards for a super snug ﬁt

JS1600 1.6mm Shears LS1013 260mm Slide Compound Saw

• Blade design results in no material loss • 1,430W motor • Body grip design with a paddle switch • Compound and mitre cuts to 45° left for easy one handed operation and right • A lock off switch prevents accident • Dust extraction to bag or can be starting connected to dust extraction system • Built-in thickness gauge for • Self closing safety blade cover convenience • Constant speed control, ideal for cutting into even the hardest timbers

JS1660 1.6mm Straight Shears LS1040 260mm Compound Mitre Saw

• Ideal for straight cutting • Heavy duty 1,650W motor • Mar-free model has a stepped • Precision machined aluminium base, blade, shims for blade adjustment to with fully calibrated angles minimise burrs • Bevel cuts 45° left only • Electric brake • Removable safety lock button • Dust extraction to bag or dust extraction system

JS1670 1.0mm Straight Shears LS1214 305mm Slide Compound Mitre Saw

• Cuts close curves, right or left, in • The deepest cutting capacity of any 30mm radius mild or stainless steel 305mm slide saw on the market, • Visible cutting line cutting a huge 115mm deep • Continuous metal curl in one direction • Powerful motor 1,650W for easier operation • Precision bevel cutting 45° both left and right, with positive stop at 33.9° ideal for crown moulding • Mitre cutting is a breeze with the base rotating 52° right and 47° to the left with positive stops at all common angles JS3200 3.2mm Shears UT120 Power Mixer

• For heavy duty cutting up to 3.2mm • Dial up variable speed control makes mild steel and 2.5mm stainless steel easy batch mixing and consistency in • Blades have 4 cutting edges each materials • Built-in thickness gauge • Electronic speed control for soft start • Ball and needle bearing construction up, constant speed, pre-selectable for long tool life speed • Highly visible sight line for precise • Thermal and current overload following of patterns protection for long durability • Full metal gearbox • Lock on switch

LC1230 305mm Metal Cutting Saw NHP1310 13mm 2 Speed Hammer Drill

• Powerful 1,750W motor • Powerful 600W motor • Lock off button prevents accidental • Quick action change dial for hammer starting and rotation or rotation only • Tool-less guide plate adjusts 0°-45° for • Ergonomic handle design for comfort quick and easy mitre cutting and control • Large cast aluminium base for stability • 2 speed gear selection with variable • Externally accessible brushes for easy speed in both ranges gives you greater maintenance control and accuracy

Page 38 United Tools National Catalogue 2006 SG1250 125mm Wall Chaser TW0350 12.7mm square drive Impact Wrench

• Ergonomically designed handle for • Incredible high fastening torque of comfort and control 350Nm • Conveniently located front cover • Aluminium hammer case with high prevents dust from spreading in every durability cutting depth • Cylinder formed housing with high • SJS feature provides smooth and rigidity and durability comfortable cutting by reducing the • Efﬁcient impact system with less start up shock and protection from vibration and longer tool life accidental wheel jam • Forward and Reverse rocker switch • Easy blade change

6906 19mm Impact Wrench TW1000 25.4mm square drive Impact Wrench

• Powerful 588 Nm of torque • This powerhouse packs 1000Nm of • Rocker type reversing switch for easy torque, with it’s lightweight plastic/ one handed or reverse operation glass reinforced housing and handle • Side handle adjusts 360° for • Rubber bumper protection front/rear convenient operation and on the base of the handle • Externally accessible carbon brushes • It’s rubberised soft grip makes for a for easy maintenance comfortable tool to work with

TW0200 12.7mm square drive Impact Wrench

• High torque of 200Nm • Efﬁcient impact system with less vibration and longer tool life • Variable speed switch with slide through forward/reverse switch • Convenient tool hook attaches to both sides of tool

7104L Chain Mortiser

• Notches or cuts through-holes in Power tool vibration is getting thick wood stock quickly, cleanly and a real hammering from OH&S accurately • Portable at only 17kg organisations around the • Large adjustable vice for attaching world… with good reason. ﬁrmly onto logs • Ideal for post and rail fencing and door Prolonged exposure to lock mortising tool vibration can cause permanent nerve, muscle and joint DPC7311 Petrol Power Cut damage.

• Unique 5 stage air ﬁlter system • Perfectly balanced • Optimum vibration dampening • Decompression button for easy starting • Quick adjust belt and blade cover system • Large volume mufﬂer • Computer controlled ignition So we’re proud to be taking the bad SC130DRA Mobile Rod Cutter vibes out of Makita • Powerful 12V motor ensures a clean tools, using the same cut into steel rod • Up to 150 rods (10mm) on a sigle heavy-duty engineering charge techniques that protect • Powerful hydraulic cutting with low vibration buildings from • Variable speed trigger earthquakes. METABO TOOLS FOR THE PROFESSIONAL SAFETY CLUTCH The Metabo S Automatic Safety Clutch has proven its worth in the gearbox and motor, preventing burnout and prolonging the millions of Metabo grinders. If the tool jams, the automatic safety life of the tool. clutch instantly slips the gears and reduces torque, preventing Selected Metabo grinders also feature Soft Start, Restart Protection, kickback and injury. In addition to protecting you, it also protects Safety Switch and Deadman Switch for your protection. MARATHON MOTOR Metabo's Marathon motor lasts up to 5 times longer than other heat tolerant motor with doubly protected windings, high powertool motors. Every aspect of its design is geared towards performance cooling fan, and patented winding protection grid. longer life and exceptional performance. It is a high efficiency,

MFE 30 MFX 65 ASA 1202 & MFE 30 1400 Watt 2500 Watt Wall Chaser Wall Chaser Wall Chaser & Dust Extractor

3.5Nm, 125mm diamond cutting blades 18Nm of torque for the toughest jobs. Combine Metabo’s MFE 30 Wall Chaser • Chase up to 30mm wide and 30mm deep • 7 settings to cut slots or chases 3-41mm wide with the ASA 1202 Dust Extractor • Safety Clutch and Deadman Switch • Adjustable depth of cut 20 - 65mm • The extractor has a 1200 watt motor with high • No tools required with rotating hand grip • Stable, clean cutting with its 4 wide rollers suction (248mbar) and 25lt capacity • Made in Germany • Made in Germany • Smart power outlet on vacuum

W 6-100 Combi W 10-125Q W 14-125 Ergo 650 Watt 1010 Watt 1400 Watt 100mm Angle Grinder 125mm Angle Grinder 125mm Angle Grinder

Ideal for builders and tilers Ideal for engineers, welders and manufacturers Ideal for heavy engineering and pipe fitting • Lightweight with a narrow body, perfect for • Perfect balance of weight and power • 50% more torque than other 5" grinders small cutting and grinding jobs • Safety clutch protects you from kickback injury • Lightweight with a rotatable, 3-position rear • Plus tile cutting attachment • 'Quick' tool-less disc change saves hassle handle for total control of all that power • Rear-mounted switch protected from dust • German Made • Anti-Vibration side handle • German Made • Anti-Vibration side handle

WE 14-150 Plus W 25-230 WX 23-230Q 1400 Watt 2500 Watt 2300 Watt 150mm Angle Grinder 230mm Angle Grinder 230mm Angle Grinder

Packed with safety features: soft start, restart Ideal for heavy engineering, rigging, foundries Ideal for heavy engineering, rigging, foundries protection, overload cut-out, deadman switch • Metabo's most powerful grinder • Soft start for smooth start up and Metabo’s unique safety clutch • Rotatable hand grip & 3 position side handle • Rotatable hand grip & 3 position side handle • ‘Quick’ tool-less disc change • Spindle lock and adjustable blade guard • Spindle lock and adjustable blade guard • VTC electronics maintain constant disc speed • German Made • Anti-Vibration side handle • German Made • Anti-Vibration side handle

CS 14-15 GE 700 GE 900 Plus 2100 Watt, 355mm 710 Watt 900 Watt Cut-off Saw Electronic Die Grinder Electronic Die Grinder

Ideal for rapid and precise cutting of steel, • Versatile, multi-purpose die grinder • Very high torque grinder for the toughest jobs Non Ferrous metals, iron and cast iron • Variable speed for grinding and cutting hard • Variable speed for grinding and cutting hard • Mitre adjustment up to 45 deg and soft materials (including plastic) and soft materials (including plastic) • Cutting capacity: Rolled bars 65mm ø; Pipes • Spindle lock for easy changing of tools • Spindle lock for easy changing of tools 120mm ø; Structural Steel 120 x 130mm • Made in Germany • Made in Germany

4 MODE MULTIHAMMERS Hammer, chisel, high-speed drill, low-speed drill

KHE 32 900 Watt, SDS Plus 3 mode Rotary Hammer CODE! Ready

Ideal for all tradespeople who work with concrete on site • Hammer, chisel and drill at low speed (with optional keyless chuck) • Cruise through concrete up to 32mm, wood to 40mm, steel to 18mm UHE 28 pictured CODE! Ready UHE 22 UHE 28 705 Watt, SDS Plus 1010 Watt, SDS Plus Metabo’s SDS Plus Multihammers are that unique all-round tool you’ve always wanted. Cruise through concrete quickly and cleanly and then, with the turn of a knob and a 3 second chuck change, you KHE 28 can also drill at high or low speed. For chipping or tile removal, it also 1010 Watt, SDS Plus has chisel mode. 3 mode Rotary Hammer CODE! Ready Ideal for all tradespeople who work with concrete on site Max. Drilling Capacities: 2 speed Chisel CODE! • Hammer, chisel and drill at low speed (with optional keyless chuck) Concrete Wood Steel gearbox mode Ready • Cruise through concrete up to 28mm, wood to 40mm, steel to 13mm UHE 28 28mm 40mm 16mm UHE 22 22mm 30mm 13mm -

KHE 55 | KHE 75 BHE 26 1050 | 1150 Watt 750 Watt, SDS Plus CODE! Ready SDS Max Rotary Hammer CODE! Ready 2 mode Rotary Hammer

• 40/45mm max drill Ø • 1300-2600 / 1325-2650 impacts per min. Ideal for all tradespeople who work with concrete • 8 Chisel positions • 1-9 / 1-10J Single blow energy • Hammer and drill at low speed (with optional keyless chuck) • VTC Electronics • Machine weight 5.9 / 6.4kg • Cruise through concrete up to 26mm, wood to 40mm, steel to 13mm

NEW!

BHE 20 Compact MHE 95 450 Watt, SDS Plus 1500 Watt, SDS Max Demolition Hammer CODE! Ready 2 mode Rotary Hammer

• SDS Max Chisel • Impacts per minute 1020-2040 Compact design, built tough in Germany and it weighs only 2.6 kg • 12 Chisel positions • Single-blow energy 5-25J • Rubber coated handle for comfort • Drills concrete 16mm, wood 20mm • VTC Electronics • Machine weight 9.8kg • 2 position Anti-Vibration side handle (not pictured) • Safety Clutch IS YOUR TOOL PROTECTED? Metabo's CODE! immobiliser makes your powertool useless to potential thieves. Metabo’s CODE! works with the same ease as MHE 65 a car immobiliser - you simply program your 1150 Watt remote with a 3-digit code of your choice. Then, SDS Max Chipping Hammer CODE! Ready at the push of a button, your Metabo power tool is immobilised and can’t be operated until re- • SDS Max Chisel • Impacts per minute 1325-2650 activated with your remote. CODE! is a powerful • 8 Chisel positions • Single-blow energy 1-10J deterrent to thieves. • VTC Electronics • Machine weight 5.7kg

SE 2800 SE 4000 DWSE 6.3 400 Watt 400 Watt 550 Watt Screwdriver Drywall Screwdriver Screwdriver

New ergonomic and lightweight design for user New ergonomic and lightweight design for user Ideal for roofers comfort even after all day use comfort even after all day use • Adjustable, removable depth stop • 12 Nm torque • Speed 0 - 2,800 rpm • 6 Nm torque • Speed 0 - 4,000 rpm • 10 torque settings from 3-18Nm • Scaffolding hook for convenience • Scaffolding hook for convenience • Self drilling screws up to 6.3mm diam (14 gauge), • Patented bit-change system • Patented bit-change system self drilling wood screws up to 7mm diameter • Weighs less than 1.2kg! • Weighs less than 1.2kg! • Made in Germany

USE 8 BE 622 BE 710 550 Watt 620 Watt 710 Watt Screwdriver Drill Drill

Ideal for high-torque fastening in hardwood or steel Ideal for builders, carpenters, plumbers and sparkies Ideal for engineering and metalworking • Precise, uniform finishing with 10-stage torque clutch • Triple reduction gearing delivers huge 35Nm torque • 2 speed gearbox with variable speed, reversing • Adjustable, removable depth stop • Variable speed and reversing for various applications • Built to last with alloy gear housing, Marathon motor • Optimal speed for self tapping screws up to 14 • Built to last with die cast aluminium gear housing • Drilling capacities: steel 13mm/8mm, softwood gauge and self drilling wood screws 8mm x 100 mm • Drilling capacities: steel 16mm, softwood 40mm 40mm/25mm • Made in Germany • Made in Germany • Made in Germany

BDE 1100 SBE 560 SBE 705 1100 Watt 560 Watt 705 Watt Drill Impact Drill Impact Drill

Ideal for heavy engineering applications Ideal for tradespeople who need a versatile drill Ideal for carpenters, maintenance workers and tradies • 55Nm torque and 16mm chuck for the really big jobs • Outstanding power-to-weight gives 5Nm torque • 2 speed gearbox with variable speed, reversing • 2 speed gearbox with variable speed, reversing • 13mm quick action keyless chuck • Built to last with alloy gear housing, Marathon motor • Drilling capacities: steel 16mm/10mm, softwood • Variable speed and reverse for precise control • Drilling capacities: concrete 20mm, steel 13/8mm, 40mm/25mm • Drilling capacities: 10mm steel, 20mm wood, softwood 40/25mm • Made in Germany 12mm concrete • Made in Germany

SAFETY FIRST SBE 750 SBE 850 Impulse 750 Watt 850 Watt Impact Drill Impact Drill

Ideal for plumbers, sparkies, and builders Ideal for shopfitters, cabinetmakers and carpenters • 2 speed gearbox with variable speed, reversing • Impulse function for easy starts on smooth surfaces • Built to last with alloy gear housing, Marathon motor and fast removal of screws with damaged heads. • Drilling capacities: concrete 20mm, steel 13/8mm, SBE 850 Contact • Drilling capacities: concrete 20mm, steel 13/8mm, softwood 40/25mm 850 Watt softwood 40/25mm • Made in Germany Impact Drill • Made in Germany Metabo’s unique Contact feature protects the user from shock if they drill into live wiring or earthed material. As soon as RWE 1100 SBE 1010 Plus the bit strikes the conducting or earthed 1100 Watt 1010 Watt material, the tool switches off immediately. Heavy Duty Impact Drill Agitator

• 28 Nm of torque for heavy drilling work and VTC Ideal for sparkies, plumbers, renovators and builders • Ideal for plasterers, painters & bricklayers electronics for constant drill speed even under • Drilling capacities: • High torque agitation and mixing device for very heavy loads concrete 20mm, steel 13/8mm, heavy-duty, continuous use by • 2 speed gearbox with variable speed, reversing softwood 40/25mm • Fast change of agitator paddle using the keyless • Overload and restart protection, Safety clutch • Made in Germany adapter (accessory) • Made in Germany CODE! Ready • Made in Germany

LITHIUM ION AIR-COOLED BATTERIES CHARGERS

Li-Power is Metabo’s unique combination of Lithium Ion batteries Lighter. Weighs up to 40% less than other battery Li-Power chargers use the latest Air-Cooled charging and Air-Cooled chargers that types. Stronger. Will perform up to 40% more technology to prolong the battery’s useful life. The work per charge than Ni-Cd batteries. Longer. chargers have a built-in fan which cools the battery delivers outstanding performance The ‘Smart Pack’ battery is designed for self- fast, reducing the charging time dramatically and and service life preservation, giving you a longer useful life. protecting the battery cells from damage.

BSZ 14.4 Impulse Li BSZ 18 Impulse Li 14.4 Volt Lithium Ion 18 Volt Lithium Ion Cordless Drill Cordless Drill

• With 2 x Li-Power batteries that are lighter, give more • With 2 x Li-Power batteries that are lighter, give more work per charge & designed to last longer than NiCd work per charge & designed to last longer than NiCd • AC 30 Plus Air-Cooled charger • AC 30 Plus Air-Cooled charger • German-made, with Impulse function for removing • German-made, with Impulse function for removing damaged screws easily damaged screws easily • 20 torque settings. Drills steel 12mm, wood 30mm • 20 torque settings. Drills steel 12mm, wood 35mm

BHA 18 ASE 18 18 Volt 18 Volt 18 Volt Li Kit Cordless Rotary Hammer Sabre Saw 18 Volt Lithium Ion Kit

• Compact L-shape design gives greater access • Light and well balanced, with a comfortable handle • Kit includes in tight areas • Maximum power for any application BSZ 18 Impulse Li Drill/Driver, KSAP 18 Li Circular • Light-weight and ergonomic • Quick tool-less blade saves time and hassle Saw, ASE 18 Li Sabre Saw & MLA 18 Li Torch • Comfortable, rubbed coated grip • Blade can be inverted 180 for greater access • With 2 x Li-Power batteries that are lighter, give • 2 position Anti-Vibration side handle (not pictured) • Tool only, not supplied with batteries or charger more work per charge & designed to last longer than • 2 x 2.2Ah Li-Ion batteries & AC 30 Plus charger • Suits Li-Power system & current BSZ NiCd batteries NiCd • AC 30 Plus Air-Cooled charger

SBP 18 Plus BSP 18 Plus BSP 15.6 Plus 18 Volt 18 Volt 15.6 Volt Cordless Impact Drill Cordless Drill Cordless Drill

• German-made with outstanding max torque of • German-made with incredible max torque of 65Nm • German-made with outstanding max torque of 60Nm 65Nm, 5 torque settings and impact function. and 20 torque settings for precise screw driving and 20 torque settings for precise screw driving • Unique ‘Impulse’ mode for easy removal of • Unique ‘Impulse’ mode for easy removal of • Unique ‘Impulse’ mode for easy removal of damaged screws and easy starts on smooth surfaces damaged screws and easy starts on smooth surfaces damaged screws and easy starts on smooth surfaces • Drilling capacity: Concrete up to 16mm, Steel up to • Drilling capacity: Steel up to 13mm, Softwood up • Drilling capacity: Steel up to 13mm, Softwood up 13mm, Softwood up to 50mm to 50mm to 45mm

PowerMaxx H 1600 HE 2000 4.8 Volt 1600 Watt 2000 Watt Compact Screwdriver Heat Gun Heat Gun

Perfect for every tool box Ideal for stripping paint, heat shrinking cables, bend- Ideal for mobile and stationary heating tasks • Small and light, it can get into the tightest spots ing conduit, thawing frozen water pipes, etc. • 3 air flow rates & progressive heat variation from • Built in Germany with a whopping 9Nm max. • 3 air-flow rates & 3 heat levels: 50 / 350 / 555 ° C 50°C to 600°C torque, this is a trade-tough tool • Easy-to-clean air filter, for a long useful life • Easy-to-clean air filter, for a long useful life • 2-speed gearbox & 20 torque settings • Powerful motor with optimal cooling • Powerful motor with optimal cooling • Optional keyless chuck and angle drill attachment • Made in Germany • Made in Germany

STE 70 STEB 135 STE 135 570 Watt 720 Watt 720 Watt Jig Saw Jig Saw Jig Saw

Ideal for builders, carpenters and renovators Ideal for carpenters, woodworkers and shopfitters Ideal for carpenters, woodworkers and shopfitters • VC electronics for constant speed even under load • 'Quick' tool-less blade change saves you time • 'Quick' tool-less blade change saves you time • 4 stage orbital blade movement for faster, easier & • 5 stage orbital blade action for fast, smooth cuts • 5 stage orbital blade action for fast, smooth cuts smoother cutting • VC electronics for constant speed even under load • VC electronics for constant speed even under load • Timber 70mm; NF metals 20mm; Sheet metal 6mm • Timber 135mm; NFMetal 30mm; SheetSteel 10mm • Timber 135mm; NF Metals 30mm; Sheet Steel 10mm • Made in Germany • Made in Germany • Made in Germany

UNIQUE PRODUCT Ho 0882 Ho E 0983 800 Watt 900 Watt Planer Electronic Planer

Ideal for builders, carpenters and renovators Ideal for carpenters, woodworkers and shopfitters • Cutting width 82mm, 0-3mm cutting depth • Cutting width 82mm, 0-3mm cutting depth LF 724 S • Solid, 2-sided TCT blades, in quick cassette system • Electronic speed control for uniform planing results 710 Watt for easy blade change • Planing guide tiltable to 45° for bevels Paint Remover • Chip and shaving ejector can be set left or right • Solid 2-sided TCT blades, in quick cassette system • Made in Germany • Made in Germany Removes paint 3 times faster than a belt sander, it can also be used as a fine planer on untreated wood. Strip rebates in windows and doors with the side cutting blades. Less toxic than chemical paint removal, it’s also easy to clean up KS 66 PSE 1200 afterwards - just connect a Metabo dust extractor 1400 Watt 1200 Watt 190mm Circular Saw Sabre Saw

Ideal for builders, carpenters and renovators Ideal for carpenters, woodworkers and builders The most powerful sabre saw in Australia • Effortless, paint removal • Use with optional guide system for precise results • 28mm cutting stroke cuts more stock in less time • Simple depth adjustment from 0-0.3mm • Max cutting depth 66mm, bevels up to 45° • Variable speed control maintains speed under load • Safety clutch prevents kickback injuries • Automatic safety clutch to prevent kick back injuries • Rotatable rear handle for those difficult positions • 4 sided, reversible blades for long useful life • Built to last with aluminium gear housing • Blade can be inverted 180° to get into tight spots • Made in Germany • Made in Germany • Tool-less blade changes in seconds

DUAL ORBIT SIZES Sr 358 DSE 300 Intec 350 Watt 300 Watt 1/2 Sheet Triangular Sander Orbital Sander

Ideal for carpenters, woodworkers and builders Ideal for woodworkers and French polishers • Unique integrated sanding dust collector • High-grade base-plate for a smooth, even finish • Variable speed for sanding a variety of materials • Low-vibration is ensured by fine-balancing system including heat-sensitive materials and surfaces • Quick-grip, rubber coated paper clamping device • Soft foam base-plate adapts perfectly to work piece • Die-cast aluminium bearing housing for long life • Made in Germany • Made in Germany

SXE 450 Duo 400 Watt Sr 10-23 Intec Electronic Orbital Sander 200 Watt 1/3 Sheet World’s only dual orbit sander, with 6mm orbit for SPA 1101 Orbital Sander fast stock removal and 3mm orbit for fine finishing Dust Collector

• Fine-balancing system ensures the smoothest finish Ideal for anyone who finishes wood or metal surfaces • The SPA 1101 is designed for use with all wood • Quick clamping system for easy paper changes • Perfectly balanced and equipped with variable working machines in the workshop • No protruding parts give full access into corners speed, it’s the right sander for any application • Vacuum 740 Pa • Rated Volume Flow 548m³/h • Built-in dust collector, so you don’t need an • 150mm Velcro-backed pad for fast disc changes • Filter Surface Area 2m² extractor for a clean work space • Sturdy die-cast alloy bearing housing for long life • 60L Collection Bin Size • Made in Germany • Made in Germany

KGS 331 BAS 260 Swift 1600 Watt 10" 350 Watt Sliding Compound Mitre Saw Band Saw • Equipped with a powerful 1600 watt induction motor and 80 tooth TCT blade, the KGS 331 gives you • Cast iron saw table: 340 x 335, tiltable to 45º precise, maintenance-free performance when cutting timber and aluminium. • Throat Capacity: 245mm, cutting height: 100mm • Max cutting depth 54mm and max cutting width 300mm (with packing) • Mitre fence and rip fence included • Weight 32 kg • Mitres up to 45° left and 45° right as well as beveling up to 45° left • Adjust the top and bottom roller guides without tools • Built for hard work with a powerful motor and tough, die cast aluminum base • Safety switch on doors stop machine when opened

KGS 305 BAS 317 2000 Watt 12" 900 Watt Sliding Compound Mitre Saw Band Saw • With the biggest cutting capacity around, it's German-engineered and designed with professionals in mind • Machine Size: 590 x 610 x 1265 • 305mm blade (std): max 320mm cutting width, 115mm cutting depth • Cast iron saw table: 400 x 548, tiltable to 45º • Can also be used with a 315mm blade to give a max 330mm cutting width, 120mm cutting depth • Throat Capacity: 305mm, Throat height: 160mm • Set mitre & bevel angles from the front of the machine. Mitres up to 50° L, 60° R & bevels up to 47° L & R • Workstand, mitre fence and rip fence included • Switch between trenching and cross-cutting in seconds • Weight 60 kg

HC 300 BAS 505 G 1850 Watt 1500 Watt Planer/Thicknesser Band Saw • Tough, teflon-clad die cast aluminium planing bed & cast iron thicknessing bed for accurate results • Cast iron table size: 536 x 640mm, tiltable to 45º • The long, stable mitre fence can be adjusted from 0° - 45°, giving you plenty of support for accurate cuts • 280mm saw blade stroke length • High grade steel rollers ensures a smooth, even feed rate of 5m/min • Super-speed brass rollers and 3 pulley guide for • The patented specially sprung rollers minimise sniping of your workpiece accuracy and durability • In the event of a power failure, the HC 300 won’t restart until you want it to • Made in Germany • Weight 146kg

TS 250 TKHS 315 M 2000 Watt 2500 Watt Table Saw Site Saw • It's got the power you need for big cuts and the precision you'd expect from a more expensive saw. • Perfect for cutting beams, boards and large panels. • Quickly adjust the FULL bevel angle range without any tools, from -1.5° to 46.5° • Motor speed 2,750 rpm • The extendable table gives you a huge 620mm RHS ripping capacity • Depth of Cut 85mm at 90°; 60mm at 45° • At only 32kg, it's also light and compact for easy transport if you work on site. • Weight 71kg • Made in Germany

Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) METABO'S3YR within four weeks of purchase. PROFESSIONAL WARRANTY Handheld Band Saw HBS120E • Powerful 800W motor • Well balanced - motor positioned centrally • Precision blade guides • Tool-free blade changes • Externally accessible brushes • 120 x 120mm throat

Cordless Drills Cordless Impact Drills S18TXC P18TXC • 2 x 18V, 2Ah reversible batteries • 2 x 18V, 2.4Ah reversible batteries • 5 planetary gears • 5 planetary gears • FIXTEC - spindle lock + keyless chuck • FIXTEC - spindle lock + keyless chuck • 20 stage torque adjustment • 20-stage torque adjustment • Ergonomic Softgrip on rear handle • Ergonomic Softgrip on rear handle • QUICKSTOP motor-brake • QUICKSTOP motor-brake

• Also available in 14.4V, 12V & 12V angle versions • Also available in 14.4 & 12V versions

Drills - Pistol Grip Drills - Rear Handle HDE13RQX B2E16RLD • Lightweight ergonomic design • Powerful 900W motor • Softgrip on handle & housing • Static stalling torque: 88Nm • Automatic spindle lock • Gear neck diameter: 57mm • Comfortable, 2 finger switch • Weight: 4.2Kg • Veriable speed, reversible

• Also available with 10 & 6mm chuck capacity • Also available with 13mm geared chuck & No.3 Morse Taper Diamond Drilling Motors Rotary Hammers - Pistol Grip • Triple reduction gearing • Internal slip clutch PFH25QE • Soft start switch • Versatile through the high torque & blow energies • Motor overload protection • Fast tool changing with the FIXTEC system • Built-in water swivel • Roto-stop facility for light chiselling • Angle of chisels can be set through the variolocking system for best handling

• Available in 300/600, 450/900 & 600/1200rpm models • Large and small base stands are also available to suit • Also available in 26mm (750W) & 30mm (1010W) capacity

Impact Drills Rotary Hammers - L Shape PD2E20R PLH32XE • Heavy duty 705W percussion drill • 32mm Rotary Hammer with chiselling function • Synchromesh gears • 900 Watt Industrial Motor • Keyless chuck • 3.8 Joules Impact Force • Reverse operation • Anti Vibration Technology • Variable speed • 0 - 800 rpm • SDS + Fitting

• Also available in 750W, 850W and 1010W • Also available in Chipping Hammer and in 40mm (1005W)

Rotary & Demolition Hammers - Upright Screwdrivers Kango 950 TKSE2500Q • 1700 Watt Motor creating a 27J Impact Force • Variable Speed Reversing TEK-gun • 3 Handles, All with Anti Vibration Technology • 725 Watts • 125 - 250 rpm • Metal Gearbox • In-Line Motor for Greater Operator Comfort • Easy snap-on depth-setting nose cone • Safety Clutch Protects Operator and Tool • 0-2500 rpm • Full Wave Electronics Can Be Used With Generators • QUIK-LOK Cable • Also available as demolition hammers in 1800W (27J), 1400W (24.5J), and 2200W (59.9J) • Also available in 4000rpm, 1200rpm and with a Sharpfire magazine (opt.)

Impact Wrench IPWE400RQ • 400Nm of Torque • 725 Watts • Variable Speed, 0-1700 rpm • Lightweight 2.7 Kg All Milwaukee Electric Tools come with a • Reversible, with switch above the handle. 2 YEAR WARRANTY 3 1 • Also available in /4" drive (520Nm) and 18V, /2" drive (325Nm), 14.4V 1 (Batteries and Chargers - 12 month warranty) Hex (85Nm) and 14.4V /2" drive (158Nm)

Page 46 United Tools National Catalogue 2006 Jigsaws FSPE110QX • 710 Watt motor • 110 mm cutting depth in timber. • Four-stage pendulum action • FIXTEC - Rapid blade change system • Die cast aluminium base plate • Extra large roller guide for greater accuracy • Also available in a 14.4V cordless version Sawzalls Circular Saws SSPE1000QX SCS65Q • 300mm cutting depth in timber • 1900 Watt motor • Oscillating action for fast cutting in timber • 65mm cutting depth • 0-2800 strokes per minute at 32mm • Tilting handle with Softgrip • 32mm Stroke for maximum comfort • Low Vibration through counter-balance mechanism • 5800rpm • Great visibility and convenient • Also available in non-oscillating 1000W, 18V pivoting handle, and adjustment levers 18V D-handle versions • Also available - 18V wood & metal saws & 1800W compound mitre saw

Biscuit Joiner & Router Sanders PJ710 ROS150 • 710 Watt motor • 450 Watt industrial motor • 19mm cutting depth • 150mm disc diameter • 100 diameter cutter • Oscillates 7mm every 5500rpm • 6 preset depth stops and • Integrated dust extraction 3 preset angle positions • All-metal gear drive • Spindle lock • Easy to read markings and scales 1 • Also available - 1 /4hp plunge router • Also available in 125mm, plus a delta sander & finishing sander Disc Sanders & Polishers Wall Chasers & Dust Extractors AS12QE WCS45 • 178mm disc sander • 1900 Watt motor • 1200 Watt motor • 2 x 150mm blades • 1800-4800 rpm • 45mm width and depth • Thermal overload protection • Variable auto cutting width • Large comfortable trigger • Tilting handle with softgrip for • Only 2.1 Kg maximum cutting comfort • Integrated dust extraction adaptor • Also available as a polisher and 14.4 sander • Also available in 125mm & 230mm plusa 3600l/min dust extractor

Angle Grinders - Barrel Grip Angle Grinders - Rear Handle AG8-100 AG23-230 • 100mm angle grinder • 230mm angle grinder • 750 watt motor • 2300 watt motor • Patented spindle lock • Safety lock off deadman switch • Convenient safety switch • Quick release disc guard • Quick action disc guard • Patented safety spindle lock • 4m Quik-lok cable • Only 4.8kg • Also available in 115mm, 125mm (1200W & 1500W) & variable speed 125mm • Also available in 180mm & 125mm (1200W & 1500W)

Grinders - Die & Straight Shears & Nibblers DGL30QE S2.5Q • 600 Watt motor • Sheet metal shear • Precision spindle with double bearing • 500 Watt motor • Metal gearbox • 2.5mm cutting capacity • 10,000 - 30,000rpm • 7m/min cutting speed • 1/4" collet • Four-sided reversible blades • Also available without extension shaft • Safety hand guard plus two-handed version and 125mm straight grinder • Also available as a nibbler & slotting shear

Magnetic Drill Stands MDE42 • 1200 Watt motor • 42mm max. broach diameter • 16mm max. solid bit diameter • 10,000N holding power at drill point • 300-640rpm (no load) • 11.5 Kg • Also available with 38mm capacity and with No3 Morse Taper (3 motor speed options)

United Tools National Catalogue 2006 Page 47 INTRODUCING 0730-37 REVOLUTIONARY CIRCULAR SAW 28 VOLT LITHIUM-ION 2 x 3Ah 28 Volt Lithium-Ion TECHNOLOGY batteries Saw blade diameter: 165mm No load speed: 4200 rpm 50° bevel cuts All-metal guards with aluminium base plate

28V POWER AT 18V WEIGHT With V28 Lithium-Ion more power no longer means more weight. Weighing slightly less than a conventional 18V battery, V28 delivers up to twice the run-time and up to 50% more power, 0724-37 perfect for high current drain jobs. PERCUSSION DRILL 2 x 3Ah reversible 28 Volt Lithium-Ion batteries 85Nm torque Full load speed (1st/2nd gear): 0-600/0-1800rpm 0-9000 / 0-27,000bpm 13mm All-metal keyless chuck

BATTERY FUEL GAUGE Milwaukee takes the guess work out of cordless tools. With its on-board fuel gauge feature, the V28 Lithium-Ion battery tells you how much more power you have to work with. 0779-37 IMPACT WRENCH 2 x 3Ah reversible 28 Volt Lithium-Ion batteries 0-1450 rpm 0-2450 ipm 440Nm of torque ½” square drive shank HASSLE FREE CHARGING Milwaukee’s V28 technology redefines down time. Equipped with a Performance Optimising Circuit, the V28 Lithium-Ion battery runs from efficiently, charges immediately and is ready to go back to work faster as they are not effected by 0737-37 extremes of temperature. BANDSW A 1 x 3Ah 28 Volt Lithium-Ion battery 0-225 / 0-350 rpm Milwaukee’s V28 Lithium-Ion Cutting diameter: 120mm x 120mm technology delivers up to twice Central motor for best balance the run time of 18V tools. Unlike LED light aids visibility NiCd or NiMH batteries, the V28 9 Kg in weight Lithium-Ion cells maintain consistent, fade-free power throughout the discharge cycle. The last use is as powerful as the first. EXTENDED RUN-TIME CONSTANT POWER

layout.indd 1 1/03/2006 7:54:07 AM 0756-37 ROTARY HAMMER 2 x 3Ah 28 Volt Lithium-Ion batteries 3.2 Joules impact force 26mm concrete capacity SDS+ fitting Available mid-2006

0719-37 SAWZALL® RECIP SAW 2 x 3Ah 28 Volt Lithium-Ion batteries Stroke rate: 0-2000/0-3000 spm 29mm stroke FIXTEC blade change system Gear protection clutch

AWESOME POWER

layout.indd 1 1/03/2006 7:54:07 AM &'k8dgYaZhh 9^\^iVa>beVXi9g^kZg

Model No: EY7202GQW • Digital Clutch with auto shut off • 3 Speed (High/Medium/Low) • High Capacity 3.5Ah Ni-MH Battery • Variable Speed Control/Reversible • Compact Body (Length 167mm) • Light Weight (1.85Kg) • High Power (Max. 120 N~m) • 55 Min Charging System • Electric Brake • Ergonomic Design • Includes Extra Battery Pack 8dgYaZhh9g^aa VcY9g^kZgh

15.6V Cordless Drill & Driver 12V Cordless Drill & Driver Model No: EY6432GQKW Model No: EY6432GQKW • High Capacity 3.5Ah Ni-MH Battery • High Capacity 3.5Ah Ni-MH Battery • Compact Body (Length 208mm) • Compact Body (Length 208mm) • Light Weight (2.2Kg) • Light Weight (1.9Kg) • High Power (31.9 N~m) • High Power (22.6 N~m) • Variable Speed Control/Reversible • Variable Speed Control/Reversible • 18-Stage Clutch Plus Drill Position • 18-Stage Clutch Plus Drill Position • 13mm Heavy-Duty Keyless Chuck • 13mm Heavy-Duty Keyless Chuck • 2 Speed Gearbox • 2 Speed Gearbox • 55 Min Charging System • 55 Min Charging System • Electric Brake • Electric Brake • Ergonomic Design • Ergonomic Design • Includes Extra Battery Pack • Includes Extra Battery Pack HeZX^Va^hiIddah

2.4V Cordless Drill & Driver 3.6V Cordless Drill & Driver Model No: EY503B Model No: EY6225CQ • Converts from Straight to Pistol Form • ‘Auto Shut-Off Clutch’ extends battery life by • 1 Hour Charging System immediately stopping rotation once selected • 2 Speed Gearbox torque setting is reached • 6.5mm Hex Drive • Powerful: 1.5 N~m (at low speed) • Multi-Stage Clutch Plus Drill • 22-Stage Clutch • Reversible • 6.5mm Hex Quick Connect Chuck • Gear Lock Mechanism for Manual • 15 Minute Charging System Tightening • Easily Converts from Straight to Pistol Form

Page 50 United Tools National Catalogue 2006 ')k8dgYaZhh GdiVgn=VbbZg

Model No: EY6813NQKW SDS-plus • High Capacity 3.0Ah Ni-MH Battery • Dual Function-Rotary Hammer & Drill • Variable Speed Control / Reversible • Two Speed Hammering / Drilling Selection • Slow Start Switch for Accurate Drilling with a Clean Finish • Ergonomic Soft Rubber Grip for Stress Reduction • 360º Auxilary Side Handle with Built-in Depth Guage • Dust Collection Cup (EY9X004E) as Standard Equipment • 45min. Charging System • 3/4’ SDS-plus Bit System • Includes Extra Battery Pack &-k8dgYaZhh =VbbZg9g^aa$9g^kZg

Model No: EY6813NQKW SDS-plus • High Capacity 3.5Ah Ni-MH Battery • Compact Body (Length 255mm) • Light Weight (2.7kg) • High Performance (Max.torque35Nm - Max.capacity ø50mm with low speed) • High Speed Brick/Masonry Drilling (Max.1,550rpm/28,000bpm) • Ergonomic Balanced Tool Body • 65min. Charging System • Variable Speed Control / Reversible • 13mm Heavy-Duty Keyless Chuck • Sure-Grip Support Handle • Includes Extra Battery Pack 8dgYaZhhHZVa^c\

7.2V Cordless Sealing Gun • Electric Operation to Reduce • Electric Speed Control Model No: EY3654CQ User Fatigue • 20min. Charging System • Accepts both Cartridge and • Drip Prevention Mechanism • Compact Battery Pack Sausage Material up to 600ml for a Clean Finish • Two Types of Plunger &-kLddY8dbWd@^i OTHER PANASONIC CORDLESS COMBO KITS AVAILABLE. ASK IN-STORE.

Model No: EYC155GQW • 18V Hammer Drill & Driver (EY6950) • 18V Wood Cutter (EY3551GQ) • 18V Flashlight (EY3796B) + Standard Wood Cutter Blade • Charger for Ni-MH Battery Pack • 18V Reciprocating Saw (Ey3544GQK) + • 2 x High Capacity 3.5Ah Ni-MH Battery Standard Reciprocating Saw Blade Packs + Carry Case

To view the full range of Panasonic Cordless Powertools visit: www.panasonic.com.au