International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 December to 31 December 2012

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 22 Road vehicles ISO/CD 17447-1 Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs

ISO/CD 17447-2 Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs

ISO/CD 17447-3 Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements ISO/CD 16844-4 Road vehicles — Tachograph systems — Part 4: CAN interface ISO/CD 16844-6 Road vehicles — Tachograph systems — Part 6: Diagnostics ISO/CD 16844-7 Road vehicles — Tachograph systems — Part 7: Parameters ISO/CD 17987-1 Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definition ISO/CD 17987-2 Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer services ISO/CD 17987-3 Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification ISO/CD 17987-4 Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical Physical Layer (EPL) specification 12V/24V ISO/CD 17987-5 Road vehicles — Local Interconnect Network (LIN) — Part 5: Application Programmers Interface (API) ISO/CD 17987-6 Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification ISO/CD 17987-7 Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conformance test specification

ISO/CD 23013 Road vehicles — Determination to forced entry of safety glass constructions used in vehicle glazing — Test of glazing systems TC 23 Tractors and machinery for agriculture and forestry ISO/CD 16414 Tractors and machinery for agriculture and forestry — Speed Identification Symbol (SIS) ISO/CD 24253-1 Crop protection equipment — Spray deposit tests of field crop sprayers — Part 1: Field deposit measurements TC 24 Particle characterization including sieving ISO/CD 15901-1 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry TC 29 Small tools ISO/CD TS 13399- Cutting tool data representation and exchange — Part 80: Concept for the design of 3D models based on properties 80 according to ISO 13399 — Overview and principles ISO/CD TS 13399- Cutting tool data representation and exchange — Part 202: Concept for the design of 3D models based on properties 202 according to ISO/TS 13399-2 — Modeling of irregular inserts ISO/CD TS 13399- Cutting tool data representation and exchange — Part 203: Concept for the design of 3D models based on properties 203 according to ISO/TS 13399-2 — Modeling of exchangeable inserts for drilling TC 44 Welding and allied processes ISO/CD 16237 Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cross-tension testing of single joints TC 61 Plastics ISO/CD 20200 Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO/CD 3826-4 Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features TC 84 Devices for administration of medicinal products and intravascular catheters ISO/CD 11070 Sterile, single-use intravascular catheter introducers TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/CD 16644-1 Quantification of patient activity in nuclear medicine — Part 1: Determination of iodine 131 activity using the conjugate view method TC 94 Personal safety -- Protective clothing and equipment ISO/CD 16900-9 Respiratory protective devices — Methods of test and test equipment — Part 9: Determination of the carbon dioxide content of inhaled air TC 118 Compressors and pneumatic tools, machines and equipment ISO 28927- Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and 8:2009/CD Amd 1 filing machines with reciprocating action and small saws with oscillating or rotating action — Amendment 1 ISO/CD 18623-1 Air compressors and compressed air systems — Air compressors — Part 1: Safety requirements TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/CD 3458 Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure

ISO/CD 3459 Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under-pressure test method and requirement

ISO/CD 3501 Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull out ISO/CD 3503 Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending

ISO/CD 13844 Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure ISO/CD 13845 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection

TC 142 Cleaning equipment for air and other gases ISO/CD 12249-1 Particulate air filters for general ventilation — Part 1: Method of calculation for the life cycle cost for air cleaning devices TC 150 Implants for surgery ISO/CD 12417 Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products TC 172 Optics and photonics ISO/CD 9849 Optics and optical instruments — Geodetic and surveying instruments — Vocabulary TC 173 Assistive products for persons with disability ISO/CD 17069 Accessible design — Consideration and assistive products for accessible meeting TC 190 Soil quality ISO/CD 17601 Soil Quality — Method to quantify the abundance of microbial communities from soil DNA extracts TC 199 Safety of machinery ISO/DTR 18670 Safety of machinery — How ISO 12100 relates to ISO 13849-1 TC 204 Intelligent transport systems ISO/CD 13185-2 Intelligent transport systems — Vehicle interface for provisioning and support of ITS services — Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface

TC 210 Quality management and corresponding general aspects for medical devices ISO/CD 18250 Connectors for enteral feed/solution reservoirs TC 214 Elevating work platforms ISO/CD 11988 Code of practise for the installation, maintenance, thorough examination and safe use of mast-climbing work platforms TC 215 Health informatics ISO/DTS 16791 Health informatics — Requirements for international machine-readable coding of medicinal product package identifiers TC 218 Timber ISO/CD 13061-13 Physical and mechanical properties of wood - Test methods for small clear specimen — Part 13: Determination of radial and tangential shrinkage TC 242 Energy Management ISO/CD 50003 Energy management system audits and auditor competency ISO/CD 50004 Guidance for the Implementation, Maintenance and Improvement of an EnMS ISO/CD 50006 Energy Baseline and Energy Performance Indicators (EnPIs) — General Principles and Guidance TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions

ISO/CD 17743 Definition of a methodological framework applicable to calculation and reporting on energy savings TC 259 Project committee: Outsourcing ISO/CD 37500 Outsourcing JTC 1 Information technology ISO/IEC PDTS Information Technology — Corporate Governance of IT Implementation Guide 38501

ISO/IEC CD 27039 Information technology — Security techniques — Selection, deployment and operations of intrusion detection systems ISO/IEC CD 27041 Guidance on assuring suitability and adequacy of investigation methods ISO/IEC CD 27042 Guidelines for the analysis and interpretation of digital evidence ISO/IEC CD 27043 Investigation principles and processes ISO/IEC 14496- Information technology — Coding of audio-visual objects — Part 10: — Amendment 3: AVC 10:2012/PDAM 3 compatible video-plus-depth extension

ISO/IEC 29199- Information technology — JPEG XR image coding system — Part 4: Conformance testing — Amendment 1: Additional 4:2010/PDAM 1 JPEG XR conformance test streams

ISO/IEC CD 18004 Information technology — Automatic identification and data capture techniques — QR Code bar code symbology specification

ISO/IEC CD Information technology — Automatic identification and data capture techniques — Part 16: Air Interface for security 29167-16 services crypto suite ECDSA-ECDH

ISO/IEC CD Information technology — languages — SQL multimedia and application packages — Part 3: Spatial 13249-3

ISO/IEC CD Quality Standard for the Creation and Delivery of Fair, Valid and Reliable e-Tests — Part 2: Application guide with use 30119-2 cases

DIS circulated

Period from 01 December to 31 December 2012

These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 10 Technical product documentation

ISO/DIS 10628-1 * Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams 2013-05-14 (Revision of ISO 10628:1997) TC 17 Steel

ISO/DIS 7778 * Through-thickness characteristics for steel products 2013-03-20 (Revision of ISO 7778:1983) ISO/DIS 15510 * Stainless steels — Chemical composition 2013-03-04 (Revision of ISO 15510:2010)

ISO/DIS 16143-1 * Stainless steels for general purposes — Part 1: Flat products 2013-03-04 (Revision of ISO 16143-1:2004)

ISO/DIS 16143-2 * Stainless steels for general purposes — Part 2: Semi-finished products, bars, rods and sections 2013-03-04 (Revision of ISO 16143-2:2004)

ISO/DIS 16143-3 * Stainless steels for general purposes — Part 3: Wire 2013-03-04 (Revision of ISO 16143-3:2005) TC 21 Equipment for fire protection and fire fighting ISO/DIS 7240-14.2 Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire 2013-02-05 detection and fire alarm systems in and around buildings (Revision of ISO/TR 7240-14:2003) TC 22 Road vehicles

ISO/DIS 10924-3 * Road vehicles - Circuit breakers — Part 3: Miniature circuit breakers 2013-03-28

ISO 11452- * Road vehicles — Component test methods for electrical disturbances from narrowband radiated 2013-03-15 7:2003/DAmd 1 electromagnetic energy — Part 7: Direct radio frequency (RF) power injection — Amendment 1

ISO/DIS 12617 * Liquefied natural gas vehicles — Connector for reflueling vehicles TC 23 Tractors and machinery for agriculture and forestry

ISO/DIS 500-1 * Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 1: General 2013-03-03 specifications, safety requirements, dimensions for master shield and clearance zone (Revision of ISO 500-1:2004, ISO 500-1:2004/Cor 1:2005)

ISO/DIS 500-3 * Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 3: Main PTO 2013-03-03 dimensions and spline dimensions, location of PTO (Revision of ISO 500-3:2004)

ISO * Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 2013-03-03 730:2009/DAmd 1 3, 4N and 4 — Amendment 1 TC 30 Measurement of fluid flow in closed conduits

ISO/DIS 10790 * Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of 2013-03-04 Coriolis meters (mass flow, density and volume flow measurements) (Revision of ISO 10790:1999, ISO 10790:1999/Amd 1:2003) TC 34 Food products

ISO/DIS 11136 * Sensory analysis — Methodology — General guidance for conducting hedonic tests with 2013-03-31 consumers in an controlled area TC 35 Paints and varnishes ISO/DIS 4618 Paints and varnishes — Terms and definitions 2013-05-21 (Revision of ISO 4618:2006) TC 39 Machine tools

ISO/DIS 1985 * Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle 2013-03-21 and reciprocating table — Testing of the accuracy (Revision of ISO 1985:1998) TC 42 Photography ISO/DIS 18937 * Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability 2013-03-04 TC 43 Acoustics

ISO/DIS 11819-2 * Acoustics — Method for measuring the influence of road surfaces on traffic noise — Part 2: Close- 2013-05-21 proximity (CPX) method TC 44 Welding and allied processes

ISO/DIS 9455-5 * Soft soldering fluxes — Test methods — Part 5: Copper mirror test 2013-05-21 (Revision of ISO 9455-5:1992) TC 61 Plastics

ISO 10350- * Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding 2013-02-28 1:2007/DAmd 1.2 materials — Amendment 1

ISO/DIS 11403-1 * Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical 2013-05-21 properties (Revision of ISO 11403-1:2001) TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS 21483 * Determination of Solubility in Nitric Acid of Plutonium in Unirradiated Mixed Oxide Fuel Pellets (U, 2013-03-11 Pu) O2 (Revision of ISO 12184:1994) TC 92 Fire safety

ISO/DIS 16405 * Measurement of toxic gas production using FTIR technique for room corner test and open 2013-03-05 calorimetry TC 96 Cranes

ISO/DIS 7752-3 * Cranes — Control layout and characteristics — Part 3: Tower cranes 2013-03-28 (Revision of ISO 7752-3:2010)

ISO/DIS 9374-3 * Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower 2013-03-09 cranes (Revision of ISO 9374-3:2002) TC 102 Iron ore and direct reduced iron

ISO/DIS 17992 * Iron ores — Determination of arsenic content — Hydride generation atomic absorption 2013-03-04 spectrometric method TC 106 Dentistry

ISO/DIS 16635-2 * Dentistry — Dental rubber dam technique — Part 2: Clamp forceps 2013-05-14 TC 108 Mechanical vibration, shock and condition monitoring

ISO/DIS 18431-3 * Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency and 2013-03-11 time-scale analysis

ISO/DIS 10816-8 * Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — 2013-03-16 Part 8: Reciprocating compressor systems

ISO/DIS 18436-2.2 Condition monitoring and diagnostics of machines — Requirements for qualification and 2013-02-08 assessment of personnel — Part 2: Vibration condition monitoring (Revision of ISO 18436-2:2003) TC 113 Hydrometry

ISO/DIS 11657 * Sediment in streams and canals — Determination of concentration by surrogate techniques 2013-03-04 TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/DIS 17885 * Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications 2013-03-11 (Revision of ISO 10838-1:2000, ISO 10838-2:2000, ISO 14236:2000, ISO 10838-3:2001) TC 145 Graphical symbols

ISO/DIS 9186-3 * Graphical symbols — Test methods — Part 3: Method for testing referent association 2013-03-11

TC 150 Implants for surgery

ISO/DIS 14243-4 * Implants for surgery — Wear of total knee prostheses — Part 4: Wear of the patella-femoral joint — 2013-03-11 Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

TC 159 Ergonomics

ISO/DIS 9241-391 * Ergonomics of Human System Interaction — Part 391: Requirements, analysis and compliance test 2013-05-07 methods for the reduction of photosensitive seizures

ISO/DIS 24504 * Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products 2013-03-30 and public address systems

TC 160 Glass in building

ISO/DIS 11485-3 * Glass in building — Curved glass — Part 3: Requirements for thermally tempered and laminated 2013-03-15 curved safety glass

TC 162 Doors and windows

ISO/DIS 13316 * Terminology for doors and windows 2013-03-11 (Revision of ISO 1804:1972) TC 172 Optics and photonics

ISO/DIS 12858-1 * Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar 2013-03-22 levelling staffs (Revision of ISO 12858-1:1999) ISO/DIS 10343 Ophthalmic instruments — Ophthalmometers 2013-05-14 (Revision of ISO 10343:2009) TC 180 Solar energy

ISO/DIS 22975-3 * Solar Energy-Collector components and materials — Part 3: Absorber surface durability 2013-03-11

TC 189 Ceramic tile

ISO/DIS 13007-2 * Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives 2013-03-22 (Revision of ISO 13007-2:2010) TC 201 Surface chemical analysis

ISO 18115- * Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy 2013-03-06 1:2010/DAmd 1 — Amendment 1

ISO 18115- * Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy — 2013-03-06 2:2010/DAmd 1 Amendment 1

TC 206 Fine ceramics

ISO/DIS 17095 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial 2013-03-13 bond strength of ceramic materials at elevated temperatures

TC 215 Health informatics

ISO/DIS 13940 * Health informatics — System of concepts to support continuity of care 2013-05-14 JTC 1 Information technology

ISO/IEC DIS 24771 * Information technology — Telecommunications and information exchange between systems — 2013-03-14 MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment (Revision of ISO/IEC 24771:2009)

ISO/IEC 10373- * Identification cards — Test methods — Part 6: Proximity cards — Amendment 6: Alternating 2013-03-08 6:2011/DAmd 6 between PICC and PCD functionalities

ISO/IEC 14443- * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization 2013-03-08 3:2011/DAmd 3 and anticollision — Amendment 3: Alternating support of PICC and PCD roles

ISO/IEC DIS * Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture 2013-03-19 24727-1 (Revision of ISO/IEC 24727-1:2007)

ISO/IEC DIS 30190 * Information technology — Digitally recorded media for information interchange and storage — 120 2013-03-15 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk

ISO/IEC DIS 30191 * Information technology — Digitally recorded media for information interchange and storage — 120 2013-03-15 mm Triple Layer (100,0 Gbytes per disk) and Quadruple Layer (128,0 Gbytes per disk) BD Recordable disk

ISO/IEC DIS 30192 * Information technology — Digitally recorded media for information interchange and storage — 120 2013-03-15 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk

ISO/IEC DIS 30193 * Information technology — Digitally recorded media for information interchange and storage — 120 2013-03-15 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk

ISO/IEC 19794- * Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — 2013-03-15 2:2011/DAmd 1 Amendment 1: Conformance testing methodology

ISO/IEC 19794- * Information technology — Biometric data interchange formats — Part 5: Face image data — 2013-03-15 5:2011/DAmd 1 Amendment 1: Conformance testing methodology and clarification defects

FDIS circulated

Period from 01 December to 31 December 2012

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown

* Available in English only

Vote terminates IIW International Institute of Welding

ISO/FDIS 6847 * Welding consumables — Deposition of a weld metal pad for chemical analysis 2013-02-21 (Revision of ISO 6847:2000)

ISO/FDIS 14346 * Static design procedure for welded hollow-section joints — Recommendations 2013-02-05 TC 23 Tractors and machinery for agriculture and forestry

ISO/FDIS 16231-1 * Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles 2013-02-07 TC 29 Small tools

ISO/FDIS 236-2 * Reamers — Part 2: Long fluted machine reamers with Morse taper shanks 2013-02-04 (Revision of ISO 236-2:1976)

ISO/FDIS 3438 * Subland twist drills for holes prior to tapping screw threads 2013-02-07 (Revision of ISO 3438:2003, ISO 3439:2003)

ISO/FDIS 9284 * Abrasive grains — Test-sieving machines 2013-02-22 (Revision of ISO 9284:1992) TC 34 Food products

ISO/FDIS 5530-1 * Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption 2013-02-12 and rheological properties using a farinograph (Revision of ISO 5530-3:1988, ISO 5530-1:1997)

ISO/FDIS 17180 * Animal feeding stuffs — Determination of lysine, methionine and threonine in commercial amino 2013-02-21 acid products and premixtures

ISO * Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived 2013-02-14 21569:2005/FDAmd products — Qualitative nucleic acid based methods — Amendment 1 1 TC 39 Machine tools

ISO/FDIS 28881 * Machine tools — Safety — Electro-discharge machines 2013-02-14 TC 44 Welding and allied processes

ISO/FDIS 15614-14 * Specification and qualification of welding procedures for metallic materials — Welding procedure 2013-02-14 test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys

ISO/FDIS 14732 * Welding personnel — Qualification testing of welding operators and weld setters for mechanized 2013-02-07 and automatic welding of metallic materials (Revision of ISO 14732:1998) TC 61 Plastics

ISO/FDIS 75-1 * Plastics — Determination of temperature of deflection under load — Part 1: General test method 2013-02-21 (Revision of ISO 75-1:2004)

ISO/FDIS 75-2 * Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite 2013-02-21 (Revision of ISO 75-2:2004)

ISO * Plastics — Determination of flexural properties — Amendment 1 2013-02-21 178:2010/FDAmd 1

ISO * Plastics — Determination of Izod impact strength — Amendment 2: Precision data 2013-02-21 180:2000/FDAmd 2

ISO/FDIS 16929 * Plastics — Determination of the degree of disintegration of plastic materials under defined 2013-02-20 composting conditions in a pilot-scale test (Revision of ISO 16929:2002) TC 69 Applications of statistical methods

ISO/FDIS 3534-3 * Statistics — Vocabulary and symbols — Part 3: Design of experiments 2013-02-14 (Revision of ISO 3534-3:1999)

ISO/FDIS 7870-2 * Control charts — Part 2: Shewhart control charts 2013-02-13 (Revision of ISO 8258:1991)

ISO/FDIS 11843-6 * Capability of detection — Part 6: Methodology for the determination of the critical value and the 2013-02-05 minimum detectable value in Poisson distributed measurements by normal approximations TC 106 Dentistry ISO/FDIS 6873 * Dentistry — Gypsum products 2013-02-21 (Revision of ISO 6873:1998)

ISO/FDIS 1797-3 * Dentistry — Shanks for rotary instruments — Part 3: Shanks made of ceramics 2013-02-07 TC 121 Anaesthetic and respiratory equipment

ISO/FDIS 81060-2 * Non-invasive sphygmomanometers — Part 2: Clinical investigation of automated measurement 2013-02-15 type (Revision of ISO 81060-2:2009) TC 126 Tobacco and tobacco products

ISO/FDIS 10315 * Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method 2013-02-06 (Revision of ISO 10315:2000, ISO 10315:2000/Cor 1:2000) TC 127 Earth-moving machinery

ISO/FDIS 3164 * Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for 2013-02-14 deflection-limiting volume (Revision of ISO 3164:1995) TC 131 Fluid power systems

ISO/FDIS 6263 * Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces 2013-02-22 (Revision of ISO 6263:1997) TC 135 Non-destructive testing

ISO/FDIS 3452-1 * Non-destructive testing — Penetrant testing — Part 1: General principles 2013-02-14 (Revision of ISO 3452-1:2008) TC 146 Air quality

ISO/FDIS 12219-4 * Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile 2013-02-12 organic compounds from vehicle interior parts and materials — Small chamber method TC 147 Water quality

ISO/FDIS 13165-1 * Water quality — Radium 226 — Part 1: Test method using liquid scintillation counting 2013-02-13

ISO/FDIS 23893-3 * Water quality — Biochemical and physiological measurements on fish — Part 3: Determination of 2013-02-15 vitellogenin TC 156 Corrosion of metals and alloys

ISO/FDIS 21601 * Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion 2013-02-18 cracks detected in service TC 172 Optics and photonics

ISO/FDIS 11252 * Lasers and laser-related equipment — Laser device — Minimum requirements for documentation 2013-02-07 (Revision of ISO 11252:2004) TC 198 Sterilization of health care products

ISO 13408- * Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1 2013-02-07 6:2005/FDAmd 1 TC 204 Intelligent transport systems

ISO/FDIS 15628 * Intelligent transport systems — Dedicated short range communication (DSRC) — DSRC 2013-02-19 application layer (Revision of ISO 15628:2007) TC 206 Fine ceramics ISO/FDIS 11894-1 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity 2013-02-18 measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes

ISO/FDIS 22197-4 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air- 2013-02-20 purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde

ISO/FDIS 22197-5 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air- 2013-02-20 purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan TC 207 Environmental management

ISO/FDIS 14065 * Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use 2013-03-07 in accreditation or other forms of recognition (Revision of ISO 14065:2007) TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO/FDIS 19001 * In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro 2013-02-14 diagnostic reagents for staining in biology (Revision of ISO 19001:2002) TC 215 Health informatics

ISO/FDIS 13120 * Health informatics — Syntax to represent the content of healthcare classification systems — 2013-02-14 Classification Markup Language (ClaML) JTC 1 Information technology

ISO/IEC * Information technology — Universal Coded Character Set (UCS) — Amendment 1: Linear A, 2013-02-08 10646:2012/FDAmd Palmyrene, Manichaean, Khojki, Khudawadi, Bassa Vah, Duployan, and other characters 1 ISO/IEC FDIS 25064 Systems and software engineering — Software product Quality Requirements and Evaluation 2013-02-21 (SQuaRE) — Common Industry Format (CIF) for usability: User needs report ISO/IEC FDIS 7816-4 Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for 2013-02-15 interchange (Revision of ISO/IEC 7816-4:2005, ISO/IEC 7816-4:2005/Amd 1:2008) ISO/IEC FDIS 29115 Information technology — Security techniques — Entity authentication assurance framework 2013-02-21 ISO/IEC 15444- Information technology — JPEG 2000 image coding system: Interactivity tools, APIs and 2013-02-22 9:2005/FDAmd 5 protocols — Part 9: — Amendment 5: UDP transport and additional enhancements to JPIP ISO/IEC FDIS 23005- Information technology — Media context and control — Part 2: Control information 2013-02-21 2 (Revision of ISO/IEC 23005-2:2011) ISO/IEC FDIS 23005- Information technology — Media context and control — Part 4: Virtual world object characteristics 2013-02-15 4 (Revision of ISO/IEC 23005-4:2011)

ISO/IEC FDIS 23005- * Information technology — Media context and control — Part 6: Common types and tools 2013-02-11 6 (Revision of ISO/IEC 23005-6:2011)

ISO/IEC FDIS 19794- * Information technology — Biometric data interchange formats — Part 14: DNA data 2013-02-19 14