CURRICULU M VITAE

Dr. KAKANDIKAR GANESH MAROTRAO ORCID 0000-0003-3120-4009 Correspondence Address RESEARCHER ID G-3529-2017 Flat No. 1103, CHANDRANIL SCOPUS ID 55874256900 S. No. 144, Garmal GOOGLE SCHOLAR h-INDEX 08 Dhayari, Pune 411041 SCOPUS h-INDEX 05 , INDIA CITAT IONS 185 Ph.No.020-2439 1062, Mobile:919860641885, Website: www.mitwpu.edu.in, Email:[email protected] [email protected],

 ACADEMIC QUALIFICATIONS

SR. EXAM YEAR INSTITUTE BOARD/ UNIVERSITY MARKS CLASS Indira Gandhi High M.S.B.S. & H.S.E. 01 S.S.C. 1993 82.71 Distinction School, Nanded Aurangabad Yashwant College, M.S.B.S. & H.S.E. 02 H.S.C. 1995 80.17 Distinction Nanded Aurangabad T.P.C.T.’s C.o.E. Dr. B. A. Marathwada 03 B.E. 1999 72.06 Distinction Osmanabad University, Aurangabad S.G.G.S.I.E.& T. S. R. T. Marathwada 04 M.E. 2005 68.81 First Nanded University, Nanded S.G.G.S.I.E.& T. S. R. T. Marathwada Awarded on 05 Ph.D. 2014 -- Nanded University, Nanded 13.06.2014 M.B.A. 06 2015 Y.C.M.O.U. Nashik Y.C.M.O.U. Nashik 55.65 Second Finance

GRANTS RECEIVED Received Grants from Scientific & Engineering Research Board, Department of Science & 01. Technology, Government of India for Attending International Conference IDDRG 2013, at Zurich, Switzerland during 02-05 June 2013 under Young Scientist International Travel Support Scheme. Received Rupees One Lac for Research Project entitled “Optimization of Metal Forming Processes” from 02. University of Pune, Pune under Research Scheme. Received Grants of Rupees Three Lac from Savitribai Phule Pune University for Three Days Faculty 03. Development Programme on Advances in Engineering Optimization under Quality Improvement Programme 2014-2015. Received Research Grant of Rupees Fifteen Lacs from Aeronautics Research and Development Board, 04. DRDO, new Delhi for project entitled “Numerical and Experimental Investigations on Formability of Thin Metal Foils in Micro Forming for Aerospace Applications”.

Ph. D. THESIS COMMITTEE Title : Some Studies on Optimization of Sheet Metal Forming Processes Dr. K. Narasimhan - IIT Bombay Thesis Committee : Dr. D. Ravi Kumar - IIT Delhi  P.G. RESEARCH Design Optimization of Deep Drawing Process for Circular Components Using Title : Genetic Algorithm

1 | P a g e

AWARDS & RECOGNITIONS 01 Institute Topper Award at Final Year of Engineering at Terna Public Charitable Trusts College of Engineering, Osmanabad. 1998-1999. 02 Second Prize Winner-State Level Faculty Competition of Research Projects executed by faculty to promote Industry- Institute Interaction, on the occasion of Silver Jubilee Celebrations of DIPEX in DIPEX 2013 at Pune during 06-10 March 2013. 03 Winner of Aakruti 2013 Contest in Professor category organized by 3D PLM Software Solutions Limited, Hinjewadi, Pune. 04 Award by Onwards Technology, Pune for Contribution Towards CAD/CAM Technology in Education Sector, 2014. 05 Indo Global Engineering Excellence Award – 2015 from Indo Global Chamber of Commerce, Industries and Agriculture for Research Work in Engineering. 06 Cooper Engineering Prize for Best Paper in Mechanical Engineering for paper entitled "Thinning Optimization in Punch Plate using Flower Pollination Algorithm at Annual Technical Paper Meet 2015 of The Institution of Engineers (India) at Pune. 07 Appreciation Award in ANSYS Hall of Fame 2017. 08 Member of Board of Studies in Mechanical Engineering at Dr. V. D. Karad MIT World Peace University, Pune 09 Chairman, Equivalence Committee, Dr. V. D. Karad MIT World Peace University, Pune, 2018-2019 and Member 2019-2020. 10 Member Internal Quality Assurance Committee, Dr. V. D. Karad MIT World Peace University, Pune.

11 Accessor for National Assessment and Accreditation Council, Bangalore. 12 National Level Third Prize for Research on Micro Forming at IMTEX 2020 organized by Indian Machine Tool Manufacturers Organization, Bangalore.

TEACHING EXPERIENCE UNIVERSITY APPROVAL TOTAL SR INSTITUTE DESIGNATION TENURE DETAILS TENURE Approved by DTE GSPM’s Gramin 07/09/1999 Maharashtra] 06 Years 01 Polytechnic Lecturer to O. No./NGP/Appointment 04 Months Nanded 14/01/2006 Approval/2017/3220 Dt. 16.03.2017 Shri Guru Gobind Singhji Approved by Board of Lecturer in 16/01/2006 Institute of Governors 02 Production to 06 Months Engineering & SGGSIE&T/EST/2011 Engineering 29/08/2006 Technology, /798 Dt. 13.06.2011 Nanded Vidya Assistant Pratishthan’s 30/08/2006 Approved by University of 04 Years Professor in 03 College of to Pune CCO/845 10 Months Mechanical Engineering, 11/07/2011 Dt.28.02.2008 Engineering Baramati Permanent Assistant Approved by University of Zeal College of 12/07/2011 Professor in Pune CCO/APPCAMP/6 04 Engineering & to Mechanical Dt.19.12.2011 & 17/10/2013 Research, Pune Engineering CC0/APPCAMP/138 Dt.03.12.2012 Assistant 02 Years Professor in 11 Months Post Graduate Zeal College of Permanent Mechanical 18/10/2013 Approved by University of 05 Engineering & Engineering – to Pune CCO/2137 Research, Pune Computer 15/06/2014 Dt.09.07.2014 Aided Design, Manufacture & Engineering

2 | P a g e

Associate Approved by University of Zeal College of 16/06/2014 Professor in Pune CCO/3301 01 Years 06 Engineering & to Mechanical 12/12/2014 & CCO/1965 06 Months 31/12/2015 Research, Pune Engineering Dt.01.09.2015

Associate 01.01.2016 Approved by University of Professor in Pune 01 Years to MAEEER’s Mechanical CCO/301, 06 Months 30/06/2017 Maharashtra Engineering 11/02/2017 07 Institute of Professor in Technology, Pune Approved by University of Mechanical 01.07.2017 Pune 30.06.2019 Engineering CCO/

Dr. V. D. Karad Professor in 08 MIT World Peace Mechanical 01.07.2019 Approved Continue University, Pune Engineering

ADMINISTRATIVE EXPERIENCE TOTAL SR. INSTITUTE DESIGNATION FROM TO PERIOD Head, ME- Mechanical Zeal College of Computer Two Academic 01 Engineering & 19.07.2012 30.06.2014 Aided Design, Years Research, Pune Manufacture & Engineering

Head, 01 Years 02 Zeal College of Mechanical 01.07.2014 26.09.2015 03 Months Engineering & Engineering Research, Pune Dean, Research 01 Years 03 01.07.2014 31.12.2015 & Development 06 Months PG Program Head, M.Tech. 01.06.2018 Till date ---- Mechanical- Dr. V. D. Karad CAD/CAM/CAE 04 MIT World Peace

University, Pune Associate Head, School of 24.07.2019 Continuing --- Mechanical Engineering

PUBLICATIONS

3 | P a g e

BOOK: Ganesh Kakandikar, Vilas Nandedkar, “Sheet Metal Forming Optimization: Bio Inspired Approaches” CRC Press, Taylor & Francis Group.

BOOK: Ganesh Kakandikar, Vilas Nandedkar, “Evolutionary Optimization of Sheet Metal Forming: Cylindrical Automotive Components”, Lambert Academic Publishing, Germany ISBN-978-3-659-15968-

8. Published on 06th December 2012.

BOOK: Sudhir Shivankar, Ganesh Kakandikar and Vilas Nandedkar, “Change Management in Supply Chain: A Product Life Cycle Management Approach” Lambert Academic Publishing, Germany ISBN- 978-3- 659-69085-3. Published on 28.09.2015.

BOOK CHAPTER: Harshal Shinde, Akshata Sangle, Sumit Shendkar, Omkar Kulkarni, Ninad Kulkarni, G.M. Kakandikar and V.M. Nandedkar “Optimization of Vibration of Collecting Plates of Electrostatic Precipitator Through FEA” edited by D.K. Mandal and C.S. Syan (eds.), CAD/CAM, Robotics and Factories of the Future, Lecture Notes in Mechanical Engineering, ISBN 978-81-322-2738-0 DOI 10.1007/978-81-322- 2740-3_44

4 | P a g e

BOOK CHAPTER: Sushant Mhatugade, Omkar Kulkarni, G.M. Kakandikar and V.M. Nandedkar, Development of a Multi-objective Salp Swarm Algorithm for Benchmark Functions and Real-world Problems Optimization for Engineering Problems, Edited by Kaushik Kumar, Birla Institute of Technology, Mesra, Ranchi, India J. Paulo Davim, University of Aveiro, Portugal, SBN: 9781786304742

BOOK CHAPTER: G. M. Kakandikar and V. M. Nandedkar, Big Data in Healthcare: Technical Challenges and Opportunities in Big Data in Healthcare, Edited by Anand Kulkarni; Patrick Siarry, Pramod Kumar Singh; Ajith Abraham; Mengjie Zhang; Albert Zomaya; Fazle Baki, Springer, 2020.

BOOK CHAPTER: Sushant P. Mhatugade, Ganesh M. Kakandikar, Omkar K. Kulkarni and V.M. Nandedkar Design, Optimization and Manufacturing of Mono Composite Carbon/Epoxy Leaf Spring having Varying Cross Section, DEGRUYTER.

BOOK CHAPTER: Abhishek G. Neve, Ganesh M. Kakandikar Omkar Kulkarni and V. M. Nandedkar, Optimization of Railway Bogie Snubber Spring with Grasshopper Algorithm Data Engineering and Communication Technology, pp 941-952, First Online: 09 January 2020, Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 1079)

INTERNATIONAL JOURNALS [20] Kakandikar G. M., & Dr. Nandedkar V. M. Deep Drawing Process Optimization – An Evolutionary 1. Approach International Journal of Advances in Machining and Forming Operations, Serial Publications, Delhi July-December 2009, pp 33-43, ISSN: 0975-4784. Kakandikar G.M, Darade P.D. & Dr. Nandedkar V.M Applications of Evolutionary Algorithms to Sheet 2. Metal Forming Processes – A Review International Journal of Machine Intelligence, Volume-I, Issue-II,

5 | P a g e

2009, pp 47-49, ISSN: 0975–2927. [IC: 4.45] [Indexed by Thomson Web of Science] Kakandikar G.M. & Dr. Nandedkar V. M. Some Studies on Forming Process Optimization with Genetic Algorithm An International Journal of Optimization and Control: Theories & Applications, 3. 2012, Vol.2, No.2, pp.105-112, ISSN: 2146-0957. [IC Value: 3.00] [DOI: 10.11121/ijocta.01.2012.0047] [Indexed by Scopus] Kakandikar G.M. & Dr. Nandedkar V. M. Spring Seat Forming Optimization with Genetic Algorithm 4. International Journal of Computer Aided Engineering and Technology (IJCAET), Inderscience Publisher, Vol.5, No.4, 2013, pp 362-374, ISSN (Online): 1757-2665, ISSN (Print): 1757-2657. [Indexed by Scopus] Kale P.D., Naik S.B. & Kakandikar G.M. Heat Shield Formability Analysis with Taguchi Design of 5. Experiments Trends in Advanced Science and Engineering, Science Road Publishing Corporation, Australia. TASE 5(1) pp 66-71, 2012, ISSN: 2251-6557. Jagtap Suraj, Raut L. B. & Kakandikar G. M. Analysis of Integration of Reverse Engineering and Generative Manufacturing Processes for Medical Science - A Review, International Journal of 6. Mechanical Engineering & Robotic Research, Vol.2, No.4, October 2013, pp 239-246 ISSN 2278-0149. [Indexed by Scopus] Shalaka H. Joshi and Dr. G. M. Kakandikar Product Development with Analyzing Customer 7. Requirements and Techniques International Journal of in Engineering Research and Technology, Volume 1 Issue 2, December 2014, pp 01-08, ISSN 2394-3696. [IBV = 3.53] Trupti Bhoskar, Omkar K Kulkarni, Ninad K Kulkarni, Sujata L Patekar, Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Genetic Algorithm and Its Applications to Mechanical Engineering: A Review 8. Materials Today: Proceedings, Elsevier, Volume 2, Issues 4–5, 2015, pp 2624-2630, ISSN: 2214-7853. [Indexed by Scopus] Ninad K Kulkarni, Sujata L Patekar, Trupti Bhoskar, Omkar K Kulkarni, Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Particle Swarm Optimization Applications to Mechanical Engineering- A Review 9. Materials Today: Proceedings, Elsevier, Volume 2, Issues 4–5, 2015, pp 2631-2639, ISSN: 2214-7853. [Indexed by Scopus] Kiran Bhoite, Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Schatz Mechanism with 3D-Motion 10. Mixer - A Review Materials Today: Proceedings, Elsevier, Volume 2, Issues 4–5, 2015, pp 1700-1706, ISSN: 2214-7853. [Indexed by Scopus] Shivankar Sudhir, Kakandikar G. M. & Dr. Nandedkar V. M. Implementing Engineering Change 11. Management Through Product Life Cycle Management in Automotive Field International Journal of Product Life Cycle Management, Vol.08, No.02, 2015, pp 132-141.ISSN 1743-5110. [Indexed by Scopus] Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Prediction and Optimization of Thinning in Automotive Sealing Cover Using Genetic Algorithm Journal of Computational Design and 12. Engineering, Elsevier, Volume 3, Issue 1, January 2016, Pages 63–70. ISSN 2288-4300 [Indexed in Emerging Sources Citation Index (Thomson Reuters) and Scopus] Ms. Anuja. S. Joshi, Mr. Omkar Kulkarni, Dr. Kakandikar G. M., Dr. Nandedkar V. M. Cuckoo Search 13. Optimization- A Review Materials Today: Proceedings, Vol.4, Issue 8, 2017, Pages 7262-7269, Elsevier, ISSN: 2214-7853. [Indexed by Scopus] Omkar Kulkarni, Ninad Kulkarni, Anand J. Kulkarni & Dr. Ganesh Kakandikar Constrained Cohort Intelligence using Static and Dynamic Penalty Function Approach for Mechanical Components 14. Design, International Journal of Parallel, Emergent and Distributed Systems, ISSN: 1744-5760 (Print) 1744-5779 (Online), DOI: 10.1080/17445760.2016.1242728. [Indexed in Emerging Sources Citation Index (Thomson Reuters) and Scopus] Abhishek Neve, Dr. Ganesh Kakandikar & Omkar Kulkarni, Application of Grasshopper Optimization 15. Algorithm for Constrained and Unconstrained Test Functions, International Journal of Swarm Intelligence and Evolutionary Computation, Volume 6, Issue 3, 2017. Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Spring back Optimization in Automotive Shock 16. Absorber with Genetic Algorithm, Manufacturing Reviews, Vol.5, No.1, 2018 [Indexed in Emerging Sources Citation Index (Thomson Reuters) and Scopus] 6 | P a g e

Dr. G. M. Kakandikar, Sujata L Patekar, Trupti Bhoskar, Omkar K Kulkarni, Optimizing Fracture in 17 Automotive Tail Cap by Firefly Algorithm, International Journal of Swarm Intelligence, VOL.5, NO.1, 2020. DOI: 10.1504/IJSI.2020.10027781. Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Multi Objective Optimization of Thickness and 18 Strain Distribution for Automotive Component in Forming Process, International Journal of Computational Intelligence Studies [Accepted]. DOI: 10.1504/IJCISTUDIES.2020.10028171 Anil Mashalkar, Ganesh Kakandikar and Vilas Nandedkar, Micro Forming Analysis of Ultra-Thin Brass 19 Foil Materials and Manufacturing Processes, Vol.34, Issue 13, 2019 [Science Citation Index Expanded] Impact Factor 3.350. Avinash Bhat and Dr. G. M. Kakandikar Manufacture of Silicon Carbide Reinforced Aluminium 6061 20 Metal Matrix Composites for Enhanced Sliding Wear Properties, Manufacturing Reviews, Vol.6, 2019 [Indexed in Emerging Sources Citation Index (Thomson Reuters) and Scopus]

NATIONAL JOURNALS [16] Kakandikar G. M. & Dr. Nandedkar V. M. Technology S-Curve, A Tool for Technology Forecasting, 1. Air- Conditioning A Case Study Engineering Today Journal, Chennai, Volume VII, Issue 09, September 2005 pp 12-14, ISSN: 2180-0995. Kakandikar G. M. & Dr. Nandedkar V. M. Particle Swarm Optimization Technique Industrial 2. Engineering Journal, Indian Institution of Industrial Engineering, Navi . Special Issue – 2006 pp 77-79. Kakandikar G.M, Bhosle S.M., Shinde G. U. & Dr. Nandedkar V. M. Agile Manufacturing: A Contextual 3. View Engineering Today Journal, Chennai, Volume X, Issue 03, March 2008 pp 34-40, ISSN: 2180- 0995. Kakandikar G.M., Bhosle S.M. Darade P.D. An Experimental Investigation of the Connectivity of 4. Heat Treatment Parameters on Tensile Properties of SAE1020 Steel Engineering Today Journal, Chennai, Volume XI, Issue-I, January 2009, pp 25- 31. ISSN: 2180-0995. Kakandikar G. M. Gurpreet Singh Sahni, Dr. P. S. Rai & Dr. Nandedkar V. M. Nano Robots and Human 5. Blood Industrial Engineering Journal, Indian Institution of Industrial Engineering, Navi Mumbai. Vol-I, Issue 12, June 2009. Kakandikar G.M., Bhosle S. M. & Dr. Nandedkar V. M. Technology Management Of Advanced 6. Manufacturing Technologies – A Review Industrial Engineering Journal, Indian Institution of Industrial Engineering, Navi Mumbai, Volume-II, Issue 05, November 2009. Patil Archana S. & Kakandikar G. M. Reverse Engineering of Miniaturized Product: Syringe Needle 7. Asian Journal of Engineering and Technology , December 2013, ISSN: 2347 – 7385. pp 14-18. [SJIF Scientific Journal Impact Factor = 3.871] Sankalp Girirdhar & Kakandikar G. M. Product Life Cycle - Knowledge Management Asian Journal of 8. Engineering and Technology Innovation, Vol.01, Issue 01, December 2013, ISSN: 2347 – 7385. pp 19-25. [SJIF Scientific Journal Impact Factor = 3.871] Shivankar Sudhir & Kakandikar G.M. and Dr. Nandedkar V. M. Effective Solution Towards Engineering Change Management to Improve Product Life Cycle Management Technical Journal of 9. The Institution of Engineers, Pune Local Centre, Vol.38, Nov.2014, ISBN 978-81-924990-2-4, pp 308- 314. Kiran S. Bhokare, Dr. G. M. Kakandikar, Swapnil S. Kulkarni Predicting The Fatigue of Steering Knuckle Arm of A Sport Utility Vehicle While Deploying Analytical Techniques Using CAE 10. International Journal of Scientific Research and Management Studies, Volume 1 Issue 11, pp: 372-381, ISSN: 2349-3771. Chandrakant Chavan, Dr. G. M. Kakandikar, Swapnil S. Kulkarni Analysis For Suspension Spring To 11. Determine and Improve Its Fatigue Life Using Finite Element Methodology International Journal of Scientific Research and Management Studies, Volume 1 Issue 11, pp: 352-362, ISSN: 2349-3771. Sujata Patekar, Ninad Kulkarni, Trupti Bhoskar, Omkar K Kulkarni, Dr. G. M. Kakandikar and Dr. V. M. 12. Nandedkar Applications of Teaching Learning Based Optimization to Mechanical Engineering: A

7 | P a g e

Review Industrial Engineering Journal, Indian Institution of Industrial Engineering, Mumbai. Nov.2015. Dr. G. M. Kakandikar and Dr. V. M. Nandedkar Thinning Optimization in Punch Plate using Flower 13. Pollination Algorithm Technical Journal of The Institution of Engineers, Pune Local Centre, Vol.39, Nov. 2015, pp 346-351, ISBN 978-81-924990-2-4. Sujata L Patekar, Ninad K Kulkarni, Trupti Bhoskar, Omkar K Kulkarni, Dr. G. M. Kakandikar and Dr. V. M. Nandedkar Ant Colony Optimization and Its Applications to Mechanical Engineering: A Review 14 Industrial Engineering Journal, Indian Institution of Industrial Engineering, Mumbai, Vol. IX, Issue II, February 2016. Omkar K Kulkarni, Dr. G. M. Kakandikar and Dr. V. M. Nandedkar Numerical Process Modeling & 15 Analysis for Optimization of Thinning in Automotive Cup, with Two Collars Technical Journal of The Institution of Engineers, Pune Local Centre, Vol. 40, Nov. 2016, ISBN 978-81-924990-2-4. Ms. Chavan Madhura, Mr. Narendra Naukudkar, Mr. S. B. Kumbhar, Dr. Ganesh Kakandikar, Dr. Vilas 16 Nandedkar Design and Development of Robot Gripper: Shape Memory Alloy Approach, Industrial Engineering Journal, Indian Institution of Industrial Engineering, Mumbai, Vol. 10, Issue 3, March 2017.

INTERNATIONAL CONFERENCES [11] Kakandikar G. M. & Dr. Nandedkar V. M. Optimizing the Design Variables In Deep Drawing Process For Automotive Component Using Genetic Algorithm International Conference on Production and 1. Industrial Engineering [CPIE-2007] organized by Department of Industrial Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, Punjab in academic partnership with Global Institute of Flexible Systems Management, New Delhi, 22-24 March 2007, page 90. Kakandikar G. M & Dr. Nandedkar V. M. A Genetic Algorithm Approach to The Optimization of Deep 2. Drawing Process International Conference on Advances in Mechanical Engineering, organized by Department of Mechanical Engineering, Indian Institute of Science, Bangalore, 02-04 July 2008, page 48. Kakandikar G. M & Dr. Nandedkar V. M. Some Studies on Forming Parameters & Formability with Taguchi for Punch Plate International Deep Drawing Research Group Conference organized by Sheet 3. Metal Forming Research Association, India at Indian Institute of Technology Bombay During 24-27 November 2012, pp 458-466. Kakandikar G.M & Dr. Nandedkar V.M, Relationship Modeling of Process Parameters for Wrinkling Optimization of Tail Cap – An Automotive Component International Deep Drawing Research Group 4. Conference organized by Swiss Federal Institute of Technology, Zurich, Switzerland During 02-05 June 2013, pp 407-412. Suraj R. Jagtap, L. B. Raut, G. M. Kakandikar Reverse Engineering and Additive Manufacturing for Medical Science Application – Appendix International Conference on Science and Technology ICST- 5. 2K14, February 21-22, organized by S. B. Patil College of Engineering Indapur, Pune in association with Indian Society for Technical Education, New Delhi. Harshal Shinde, Akshata Sangle, Sumit Shendkar, Mr. Ninad Kulkarni, Mr. Omkar Kulkarni, Dr. G. M. Kakandikar and Dr. V. M. Nandedkar, Optimization of Vibration of Collecting Plates of Electrostatic 6. Precipitator through FEA 28th International Conference on CADCAM, Robotics and Factories of the Future 2016, Organized by College of Engineering and Management, Kolaghat, 05-06 Jan 2016, pp 455- 460. Mr. Pushpak Phule, Dr. Kakandikar G.M., Dr. Nandedkar V.M, Dr. Tungikar V. B. and Dr. Waghmare 7. L.M. Design and Development of Expert System for Deep Drawing International Conference on Advanced and Agile Manufacturing Systems ICAAM-2015, December 28-29, 2015, pp 212-216. Dhanraj Shendge, Dr. G. M. Kakandikar and Omkar Kulkarni Design and Optimization of Castellated Beam using FEA, International Conference on Advanced and Agile Manufacturing and Agile Software 8. Development, ICAAM-2016, SGGS Institute of Engineering and Technology, Nanded, India, 06-07 Oct. 2016, pp 242-248. Sujata Patekar, Dr. G. M. Kakandikar, Dr. V. M. Nandedkar Numerical Modelling and Bio Inspired

Optimization of Thinning in Automotive Sealing Cover: Grey Wolf Approach, 6th International & 27th 9. All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016 at College of Engineering, Pune, Maharashtra, pp 1718-1722.

8 | P a g e

Mayur K. Thange, Ganesh M. Kakandikar, Omkar Kulkarni, Vilas M. Nandedkar Condition Monitoring 10. Approach for Bearings Defect Detection, Proceedings of XII IPRoMM-2016 (Challenges in Manufacturing), Visvesvaraya National Institute of Technology, Nagpur, 22-23 December 2016. 2nd International Conference on Data Engineering and Communication Technology, Symbiosis Institute 11. of Technology, Symbiosis International University Pune, India, 15-16 December 2017.

NATIONAL SEMINARS/CONFERENCES [21] Kakandikar G. M. & Miss. Sirdeshpande M. K. Bio Remediation of PCB’s and Role of Genetic 1. Engineering National Conference on Pollution: Impact and Emerging Remedial Measures, sponsored by

AICTE New Delhi and Organized by Gramin Polytechnic, Vishnupuri, Nanded, Nov. 26th, 2000. Kakandikar G. M. & Borlepwar P. T. Computer Aided Process Planning of Rotational Parts With C- 2. Axis Features National Level Seminar on Modern Methods for Economic & Quality Production, organized at Gramin Polytechnic, Nanded, Maharashtra in Feb 2001. Kakandikar G. M. & Dr. Nandedkar V. M. Machine Design Optimization with Genetic Algorithm 3. National Conference on Machine Design organized by Amrutvahini College of Engineering Sangamner, Maharashtra on 27 & 28 Feb 2004. Kakandikar G. M. & Dr. Nandedkar V. M. On the Design Optimization Using Genetic Algorithm UGC 4. National Conference on Advances in Industrial Automation, organized by M.B.M. Engineering College, Jai Narain Vyas University, Jodhpur, Rajasthan on 20 & 21 March 2004. Kakandikar G. M. & Dr. Nandedkar V. M. Design Optimization of Disk Brake Using Genetic 5. Algorithm National Conference on Recent Trends in Mechanical Engineering organized by SRES College of Engineering College, Kopargaon, Maharashtra on 23 & 24 July 2004. Kakandikar G. M. & Dr. Nandedkar V. M. Computer Aided Design Optimization Using Genetic 6. Algorithm National Conference on Recent Trends in CAD/CAM organized by Guru Nanak Dev Engineering College, Bidar, Karnataka on 29 & 30 July 2004. Kakandikar G. M. & Dr. Nandedkar V. M. Technology S-Curve, A Tool for Technology Forecasting, 7. Air- Conditioning A Case Study National Conference on Sun Rising Technologies organized by Parshwanath College of Engineering, Thane 18-19 Nov.2005. Kakandikar G. M. Patil R. B. & Dr. Nandedkar V. M. Extrapolative Technology Forecasting for Plant Fertilization, Technology S-Curve an Approach National Seminar on Technical Education, Technology 8. Transfer To Rural India And Sustainable Development, Xth Annual Convention of ISTE Maharashtra Goa Section organized by M.G.M.’s College of Engineering, Nanded, 04-05 March 2006. Kakandikar G. M. Pagare R. A. Shaikh J. K. Chakka Suresh Kumar & Dr. Nandedkar V. M. Optimization and Sensitivity Analysis of Nonlinear Himmelblau Function with Genetic Algorithm National 9. Conference on Artificial Intelligence Organized by Department of Computer Engineering, Vidya Pratishthan’s College of Engineering, Baramati. 01-02 June 2007. Kakandikar G. M. Bhosle S. M. Darade P. D. and Dr. Nandedkar V. M. Global Warming: An 10. Inconvenient Truth to Accept and React National Conference on Global Warming & its Consequences Organized by Sharadabai Pawar Mahila Mahavidyalaya, Sharada Nagari, Baramati. 10-12 January 2008. Kakandikar G. M. Bhosle S. M. Darade P. D. and Dr. Nandedkar V. M. Recent Developments in Deep Drawing Process Optimization Regional level conference for teachers organized by Board of College and 11. University Development, University of Pune and Sanjeevani Rural Education Societies College of Engineering, Kopargaon. 24-25 November 2008. Kakandikar G. M. Bhosle S. M. Darade P.D. and Kolekar A.H. Light Weight Technology for Heavy 12. Weight Industries All India Seminar on Emerging Trends in Automobile Industry, organized by Pune Local Centre, The Institution of Engineers (India). 23-24 May 2009. Pages 27-27. Kakandikar G. M. and Dr. Nandedkar V. M. Experimental Formability Analysis of Rectangular Drawn 13. Automotive Component National Conference on Product Engineering, Organized by Shri Guru Gobind Singhji Institute of Engineering and Technology, Nanded. 03-04 December 2010. Joshi Shalaka & Kakandikar G.M Knowledge Representation in Product Development: A Case Study 14. of Digital Camera National Level PG-CONF-MECHANICAL 2013, Sponsored by University of Pune, the

9 | P a g e

IET, Pune Local Network, IOE, Pune Local Centre, SMFRA Mumbai, organized by Dnyanganga College of Engineering & Research, Pune. March 25-26 2013. Page 22. Phule Pushpak & Kakandikar G. M. Expert System Development for Deep Drawing Process National Level PG-CONF-MECHANICAL 2013, Sponsored by University of Pune, the IET, Pune Local Network, 15. IOE, Pune Local Centre, SMFRA Mumbai, organized by Dnyanganga College of Engineering & Research, Pune. March 25-26 2013. Page 24. Kunturkar Aparna V., Kakandikar G.M. & Parvekar Rajesh P. Finite Element Analysis of Engine Cylinder Block National Level PG-CONF-MECHANICAL 2013, Sponsored by University of Pune, the IET, 16. Pune Local Network, IOE, Pune Local Centre, SMFRA Mumbai, organized by Dnyanganga College of Engineering & Research, Pune. March 25-26 2013. Page 31. Karale Nilesh & Kakandikar G. M. Tailor Welded Blanks & Development Scope in Near Future National Level PG-CONF-MECHANICAL 2013, Sponsored by University of Pune, the IET, Pune Local 17. Network, IOE, Pune Local Centre, SMFRA Mumbai, organized by Dnyanganga College of Engineering & Research, Pune. March 25-26 2013. Page 33. Shivankar Sudhir & Kakandikar G.M Engineering Change Management Through PLM in Automotive Field National Level PG-CONF-MECHANICAL 2013, Sponsored by University of Pune, the IET, Pune 18. Local Network, IOE, Pune Local Centre, SMFRA Mumbai, organized by Dnyanganga College of Engineering & Research, Pune. March 25-26 2013. Page 21. Desai Suraj S. Dr. Sonawane C. R. and Dr. Kakandikar G. M. A Review of Functional Designing for Three-Dimensional Printing Proceedings of National Conference on Advanced Technology Innovations in 19. Mechanical Engineering, January 22-24, 2015, organized by Sinhgad Academy of Engineering, Kondhawa, Pune and Sponsored by Savitribai Phule Pune University, Pune. Mr. Kiran S. Bhokare, Dr. Kakandikar G.M. and Dr. Nandedkar V. M. Studies on Prediction of Fatigue Life of Steering Knuckle Arm, Proceedings of National Conference on Advanced Technology Innovations 20. in Mechanical Engineering, January 22-24, 2015, organized by Sinhgad Academy of Engineering, Kondhawa, Pune and Sponsored by Savitribai Phule Pune University, Pune. Mr. Chandrakant U. Chavan, Dr. Kakandikar G.M. and Dr. Nandedkar V. M. Fatigue Life Analysis of Suspension Coil Spring using Finite Element Analysis Proceedings of National Conference on 21. Advanced Technology Innovations in Mechanical Engineering, January 22-24, 2015, organized by Sinhgad Academy of Engineering, Kondhawa, Pune and Sponsored by Savitribai Phule Pune University, Pune.

COUNTRIES VISITED Switzerland, Sri Lanka, Nepal

SPECIAL ACHIEVEMENTS Worked as a Reviewer for an ASME International conference on Manufacturing Science and Engineering 1. held at Georgia Institute of Technology, Atlanta, U.S.A. during October 15-18 2007. Member of Young Scientist Travel Grant Award Committee for Mechanical Engineering in Savitribai 2. Phule Pune University, Pune.

CITATIONS [178] MSc. Ing. Yudieski Bernal Aguilar; Prof. Dr. Ing. José R. Marty Delgado; Ernesto Valdez Infante, State-of- 01 The-Art of Simulation of Sheet Metal Forming, Brief Overview International conference on Mechanical Engineering, Universidad Central Marta Abreu de Las Villas, Cuba, 04-06 November 2008. MSc. Ing. Yudieski Bernal Aguilar; Prof. Dr. Ing. José R. Marty Delgado; Ernesto Valdez Infante, Michael A. 02 Rivero Portal, Jorge Sanchez gutierrez, Leidier Flaquet Pen, Planning & Programming Sheet Metal Drawing Processing Facultadeniería Mecánica. Universidad Central “Marta Abreu” de las Villas. Cuba. Orhan Gulcan, Nihat Gemalmayan, Optimization of Explosive Mass in Explosive Forming Process By 03 Using Genetic Algorithm Erciyes University Journal of the Institute of Science & Technology, ISSN 1012- 2354, Volume 27, Issue 04, October 2011. 10 | P a g e

Jinesh Kumar Jain, Govind Sharan Dangayach, Gopal Agarwal, Evidence of Supply Chain Management 04 In Indian Manufacturing Firms: A Survey International Journal of Management Science and Engineering Management, 6(3): 198-209, 2011, ISSN 1750-9653. England. Nitin Upadhye, S. G. Deshmukh, Suresh Garg Lean Manufacturing System for Medium Size 05 Manufacturing Enterprises: An Indian Case International Journal of Management Science and Engineering Management, 5(5): 362-375, 2010, ISSN 1750-9653. England. Sinem Adiguzei, Determining Surface Residual Stress in Steel Sheets After Deep Drawing And 06 Bulging Processes thesis submitted to graduate school of Natural & Applied Sciences of Middle East University, February 2011. Prasad S. Pandhare, Vipul U. Mehunkar, Ashish S. Joshi, Amruta M. Kirde & V. M. Nandedkar Optimization of Blank Holding Force In Deep Drawing Process Using Friction Property of Steel 07 Blank International Journal on Theoretical and Applied Research in Mechanical Engineering, Vol-I, Issue- II, 2012 ISSN (Print):2319-3182. S. Prakasam and P. Thangavel Spring Back Effect Prediction In Wipe Bending Process Of Sheet Metal:

08 A GA-ANN Approach Journal of Theoretical and Applied Information Technology 30th September 2013. Vol. 55 No.3. ISSN: 1992-8645. Nguyen Van Thanh To Study The Effect of A Number of Basic Technological Parameters of The Sheet 09 Material Dam A Ph. D. thesis submitted to Polytechnic University of Hanoi, 2012. Jay N. Mistri, K. D. Kothari, Gaurav Kumar Sharma Experimental and Simulation Study of Deep 10 Drawing Process – A Review International Journal of Advance Engineering and Research Development (IJAERD) Volume 1, Issue 6, June 2014, e-ISSN: 2348 – 4470, print-ISSN:2348-6406. Asif Sha. A, Dr. T.V. Sreerama Reddy, Shaleena Manafuddin, Dr. T. Sorna Kumar A Review of Soft Computing Techniques in Materials Engineering International Journal of Advanced Research in 11 Engineering and Technology (IJARET), ISSN 0976 – 6480 (Print), ISSN 0976 – 6499(Online) Volume 5, Issue 10, October (2014), pp. 134-150 N. N. Kumbhar, Dr. A. V. Mulay and Dr. B. B. Ahuja Physical Replication of Human Bone By Using

Direct Integration of Reverse Engineering and Rapid Prototyping Techniques 5th International & 26th 12 All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th– 14th, 2014, IIT Guwahati, Assam, India. Naga Vamsi Krishna Jasti and Rambabu Kodali Validity and Reliability of Lean Enterprise Frameworks 13 In Indian Manufacturing Industry, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 0954405414555736 first published on January 12, 2015. Chandra Pal Singh and Geeta Agnihotri Study of Deep Drawing Process Parameters: A Review 14 International Journal of Scientific and Research Publications, Volume 05, Issue 02, February 2015, ISSN 2250-3153. Simulations in Medicine: Pre-clinical and Clinical Applications, edited by Irena Roterman-Konieczna, 15 Published by Walter de Gruyter GmbH & Co KG. ISBN 978-3-11-040626-9. Dr. Dhananjay. R. Dolas, Kuldeep. K. Jagtap Analysis of Coil Spring Used in Shock Absorber using CAE 16 International Journal of Engineering Research ISSN: 2319-6890(online), 2347-5013 (print) Volume No.5, Issue No.2, pp : 123- 126. Shende Vignesh, Nibmalkar Hrishikesh, Pawar Sanjay, Thorat Vijay and Raut P.S. Magnetic Suspension 17 System for Two Wheeler International Journal of Recent Research in Civil and Mechanical Engineering, Vol. II, Issue II, October 2015 – March 2016. Arif Ahmad Ansari and Prof. K. K. Jain, Finite Element Analysis of Helical Compression Spring for 18 Two Wheeler Automotive Front Suspension Global Journal of Engineering Science and Researches, March 2016, ISSN 2348-8034. Osama Mohamed Irfan, Influence of Specimen Geometry and Lubrication Conditions on the 19 Compression Behavior of AA 6066 Aluminum Alloy International Journal of Mechanical Engineering, Vol. 5, Issue 1, Dec-Jan 2015. ISSN 2319-2240. Pp 15-26. Dhiraj V. Shevale, Niranjan. D. Khaire Review on Failure Analysis of Helical Compression Spring 20 International Journal of Science, Engineering and Technology Research (IJSETR) Volume 5, Issue 4, April 11 | P a g e

2016. Jorge Sehara Catalá Process Optimization Drawing Sheet Metal Using Artificial Intelligence Tools, 21 Undergraduate Thesis, Central University "Marta Abreu" of Las Villas. Shreesh V. Dhavle, Anand J. Kulkarni, Apoorva Shastri and Ishaan R. Kale Design and Economic 22 Optimization of Shell-And-Tube Heat Exchanger Using Cohort Intelligence Algorithm, Neural Computing and Applications, 2016, DOI: 10.1007/s00521-016-2683-z, ISSN: 0941-0643. Gonfa Angasu and K. Srinivasulu Reddy, Deep Drawing Process Parameters: A Review, International 23 Journal of Current Engineering and Technology, Vol.6, No.4, Aug 2016, E-ISSN 2277 – 4106, DOI: dx.doi.org/10.14741/Ijcet/22774106/6.4.2016.20.

V. C. Sathish Gandhi, R. Kumaravelan, S. Ramesh and M. Venkatesan, Computational Study of Coil

Helical Spring: Automobile Clutch, Proceedings of 2nd International Conference on Intelligent Computing 24 and Applications, Volume 467 of the series Advances in Intelligent Systems and Computing, 13 October 2016, pp 523-540. DOI 10.1007/978-981-10-1645-5_44. Aniket Bharambe, Magnetic Suspension for Motorcycles International Journal of Science and Research, 25 Volume 5 Issue 9, September 2016, ISSN (Online): 2319-7064, pp 1092-1097 Xiling Yao, Seung Ki Moon and Guijun Bi Multidisciplinary Design Optimization to Identify Additive 26 Manufacturing Resources in Customized Product Development, Journal of Computational Design and Engineering, Available online 26 October 2016. http://dx.doi.org/10.1016/j.jcde.2016.10.001. Yasser Rostamiyan and Mohammad Abbasi, Genetic Algorithm Optimization of Initial Blank Shape in 27 Deep Drawing of Stepped Work Piece, Journal of Process Mechanical Engineering, September 10, 2016, doi:10.1177/0954408916669178. Sanjay K. Ansodariya and Bharat J. Kapadiya, Experimental And Simulation Progress On Deep 28 Drawing Process, International Journal for Scientific Research & Development, Vol. 4, Issue 05, 2016, ISSN (online): 2321-0613. Arif Ahmad Ansari and Prof. K. K. Jain Review of Design and Numerical Analysis of Helical Spring 29 Used in automobile, Global Journal of Engineering Science and Researches, Vol. 3, Issue 3, March 2016. R. Anil Kumar and R. Sri M K Naidu, Design Optimization of A steering Knuckle Joint Using FEA, 30 International Journal Of Multidisciplinary Educational Research, Volume 5, Issue 6, May 2016, ISSN : 2277-7881. Ye Re-Jun, Research on Optimal Attack and Défense Decision of Network Security Based on Fuzzy 31 Neural Network, International Journal of Security and its Applications, Vol 10, Issue 11, 2016, pp 317- 324, ISSN 1738-9976. Prof. Ganesh B. Madiwal, Dr. S. A. Patil and Swapnil S. Kulkarni Optimizing the Process Parameters for 32 Press Tool Die Trials to Realize Defect Free Parts, International Journal for Scientific Research & Development, Vol. 4, Issue 08, 2016, pp 608-611, ISSN (online): 2321-0613. N. Liu, W. Cao, Y. Zhu, J. Zhang, F. Pang and J. Ni, Node Deployment with k-Connectivity in Sensor 33 Networks for Crop Information Full Coverage Monitoring, Sensors, Vol. 16, Issue 12, 2016, pp 1-23. Mithilesh Kumar and Chandan Guria, The Elitist Non-Dominated Sorting Genetic Algorithm with 34 Inheritance (I-NSGA-II) and Its Jumping Gene Adaptations for Multi-Objective Optimization, Information Sciences, Volumes 382–383, March 2017, Pages 15–37. Pilla Anitha and V. Hari Shankar Design and Topology Optimisation of A Steering Knuckle Joint 35 Using FEA, International Journal of Scientific and Research Publications, Volume 6, Issue 11, November 2016, pp 311-316, ISSN 2250-3153. Gondi Prabhu Charan Teja, K.V.P.P. Chandu, Ch. Rama Krishna, K. Yasoda Sreeram Weight 36 Optimization of Steering Knuckle Joint Using FEA International Research Journal of Engineering and Technology (IRJET), Volume: 03, Issue: 12, Dec -2016, e-ISSN: 2395 -0056, PP276-281. Dhiraj V. Shevale & Niranjan D. Khaire Analysis of Helical Compression Spring for Estimation of 37 Fatigue Life, Imperial Journal of Interdisciplinary Research (IJIR), Vol-2, Issue-10, 2016, ISSN: 2454- 1362, PP 2088-2093. 38 D. Ramajogi Naidu, P. P. Dhanunjaya Rao Design and Analysis of Coil Spring for Two and Three

12 | P a g e

Wheelers, Asia Pacific Journal of Research, Vol: I. Issue XXXIX, May 2016, ISSN (Print): 2320-5504. pp 182-187. D. Song Application of Improved Simulated Annealing Particle Swarm Optimization in Displacement 39 Flow Shop Scheduling, International Core Journal of Engineering, Vol.03, No.10, 2017.ISSN 2414-1895 Gaurav Saxena, Ankit Singh Chauhan, Rohit Jain and Ishwar Gupta Simulation and Optimization of 40 wheel Hub and Upright of Vehicle: A Review, IOSR Journal of Mechanical and Civil Engineering, Volume 14, Issue 1 Ver. III (Jan. - Feb. 2017), PP 42-50, e-ISSN: 2278-1684. Nayan Kaneria, Darshan Shah, Rishit Rana, Vishal Shah and Parth Thakkar Effect of Different Parameters on Deep Drawing Process for Minimum Stress and Defects by Experimental and 41 Simulation Study: A Review International Journal of Advance Engineering and Research Development, Vol.3, Issue 10, October 2016, e-ISSN: 2348-4470. Ruholla Jafari-Marandi, Brian K. Smith Fluid Genetic Algorithm (FGA) Journal of Computational Design 42 and Engineering, Available online 9 March 2017 In Press, Accepted Manuscript Mr. S. R. Patil and P. S. Talmale Comparative Study of Coil Spring and Wave Spring-A Review 43 International Journal of Engineering Sciences & Research Technology, Vol.5, Issue 1, January 2016. Xiaoxia Yang, Bin Xue, Lecheng Jia, Hao Zhang Quantitative Analysis of Pit Defects in an Automobile 44 Engine Cylinder Cavity Using the Radial Basis Function Neural Network–Genetic Algorithm Model, Structural Health Monitoring, 2016. Mr. Ankur V. Kamble, Prof. S. S. Patil and Prof. M. L. Harugade Developmental Design and 45 Optimization of Steering Knuckle with Integrated Spindle, International Journal for Scientific Research & Development, Vol. 5, Issue 1, 2017, ISSN (online): 2321-0613. Rashmi Dwivedi and Geeta Agnihotri, Study of Deep Drawing Process Parameters, Materials Today 46 Proceedings Vol. 4, Issue 2, Part A, 2017, Pp 820–826. Y Xie, S Chen, Q Ni, H Wu, Integration of Resource Allocation and Task Assignment for Optimizing

the Cost and Maximum Throughput of Business Processes, Journal of Intelligent Manufacturing, First 47 Online: 09 May 2017, March 2019, Volume 30, Issue 3, pp 1351–1369.

Chris E. Mohn Predicting Cation Ordering in, MgAl2O4 using Genetic Algorithms and Density 48 Functional Theory Materials and Manufacturing Processes, Vol. 33, Issue 2, 2018, pp 174-179. Ishaan R. Kale & Anand J. Kulkarni Cohort Intelligence Algorithm for Discrete and Mixed Variable 49 Engineering Problems International Journal of Parallel, Emergent and Distributed Systems [In Press] Dipti Kapoor Sarmaha and Anand Kulkarni JPEG based Steganography Methods using Cohort 50 Intelligence with Cognitive Computing and Modified Multi Random Start Local Search Optimization Algorithms, Information Sciences, Available online 22 November 2017. Abhijit Dey, Mriganav Debnath, and Krishna Murari Pandey Analysis of Effect of Machining Parameters 51 During Electrical Discharge Machining Using Taguchi-Based Multi-Objective PSO International Journal of Computational Intelligence and Applications, Volume 16, Issue 02, June 2017. Dipti Kapoor Sarmah and Anand J. Kulkarni Image Steganography Capacity Improvement Using Cohort Intelligence and Modified Multi-Random Start Local Search Methods, Arabian Journal for 52 Science and Engineering, Special Issue - Computer Engineering and Computer Science, First Online: 28 July 2017. Mohsen Asadnia, Ajay Giri Prakash Kottapalli and Majid Ebrahimi Warkiani An Accurate PSO-GA Based 53 Neural Network to model Growth of Carbon Nanotubes, Journal of Nanomaterials, Online in July 2017. Sushama S. Bobade and Tushar Y. Badgujar A State of Art in A Sheet Metal Stamping Forming 54 Technology - An Overview, International Journal of Advance Research and Innovative Ideas in Education, Vol-3, Issue-3 2017. Naga Vamsi Krishna Jasti An Empirical Investigation of Lean Enterprise in Indian Industry Ph.D. 55 Thesis Submitted to Birla Institute of Technology, Pilani. 2014. K.A.Zakaria, F.H.A.Suhadak, A.E.M.Razalli and M.S.Kassim Fatigue Damage Analysis of Automobile 56 Steering Knuckle using Finite element Analysis, ARPN Journal of Engineering and Applied Sciences, Vol.12, No.14, July 2017, pp 4225 - 4228.

13 | P a g e

M. Shahrouzi and H. Farah-Abadi A Fast Fuzzy-Tuned Multi-Objective Optimization for Sizing 57 Problems, International Journal of Optimization in Civil Engineering, Vol. 8, Issue 1 pp 53-75.

Pritesh Shah, Sudhir Agashe and Anand J Kulkarni Design of Fractional Piλdµ Controller Using The 58 Cohort Intelligence Method, Frontiers of Information Technology & Electronic Engineering F. Marandi and S.H. Zegordi Integrated Production and Distribution Scheduling for Perishable 59 Products, Scientia Iranica E Vol. 24, Issue 4, pp 2105- 2118, 2017. Omid Bozorg-Haddad, Mohammad Solgi and Hugo A. Loáiciga, Genetic Algorithm – Meta Heuristic and 60 Evolutionary Algorithms for Engineering Optimization, 2017, John Wiley & Sons, Incorporations, DOI: 10.1002/9781119387053.ch4. Lip Huat Saw, Li Wen Ho, Ming Chian Yew, Farazila Yusof, Nugroho Agung Pambudi, Tan Ching Ng, Ming Kun Yew Sensitivity Analysis Of Drill Wear And Optimization Using Adaptive Neuro Fuzzy –Genetic 61 Algorithm Technique Toward Sustainable Machining, Journal of Cleaner Production, Available online 30 October 2017, https://doi.org/10.1016/j.jclepro.2017.10.303 Hanh C. Nguyen, Shigeru Nagasawa and Kensei Kaneko Optimizing boundary surface of ceramics die 62 in deep drawing process, Transactions on GIGAKU, Vol. 4, Issue 1, 2017, pages 1-7. P Roychowdhury, S. Mehra, R Devarakonda, Prakhar Shrivastava, Siddharth Basu and Anand J Kulkarni 63 A Self-organizing Multi-Agent Cooperative Robotic System: An Application of Cohort Intelligence Algorithm, In book: Socio-cultural Inspired Metaheuristics, January 2019. SitiHafawati Jamaluddin, Norwaziah Mahmud et al, Particle Swarm Optimization: Optimizing 64 Transportation Cost Problem, Computing Research & Innovation book edited by Mahfudzah Othman, Mohammad Hafiz Ismail, Nadia Abdul Wahab (CRINN) Vol 2, October 2017, pp 116. Luis Fabian Fuentes-Cortes and José María Ponce-Ortega, Perspectives for Implementing Distributed 65 Generation in Developing Countries through Modelling Techniques, ACS Sustainable Chemistry & Engineering, online November 16, 2017, DOI: 10.1021/acssuschemeng.7b03359. Rahida Wati Sharudin, Norshawalina Muhamad Ajib, Marina Yusoff, and Mohd Aizad Ahmad Swarm Intelligence Application for Optimization of CO2 Diffusivity in Polystyrene-Bpolybutadiene-B- 66 Polystyrene (SEBS) foaming, Advanced Materials for Sustainability and Growth AIP Conf. Proc. 1901, 060002 (2017). Pp 060002-1 to 060002-7. KR Kashyzadeha, GH Farrahi, M. Shariyat and M. T. Ahmadian, Experimental and Finite Element 67 Studies on Free Vibration of Automotive Steering Knuckle, International Journal of Engineering, Transactions B: Applications, Vol.30, No.11, Nov. 2017, pp 1776-1783. Lata Nautiya, Preeti Shivach and Mangey Ram, Optimal Designs by Means of Genetic Algorithms, Book: 68 Soft Computing Techniques and Applications in Mechanical Engineering, IGI Global, 2018, pp 151-161. de Oliveira, A., Campos, C., Peralta, A., Neto, R. et al., Parameters Estimation of a Tire Model Based on 69 Julien’s Theory, SAE Technical Paper 2017-36-0177, 2017. Xuenan Zhang, Juan Hong and Zhuoyue Song, PSO-based Design of PID Controller with Notch Filter

70 for Flexible Structures, The 7th International Symposium on Computational Intelligence and Industrial Applications, Beijing, P.R. China, Nov.3-6, 2016. S. Madhusudhanan, I. Rajendran, B. Raguganeshkumar, Fatigue Analysis of Steering Knuckle using 71 Finite Element Simulation: Technical Note, International Journal of Vehicle Structures & Systems, Vol 9, No 3, 2017. Tushar Y. Badgujar and Vijay P. Wani, Optimization of Stamping Process Parameters for Material

Thinning with Design of Experiment Approach, IVth International Conference On Production and 72 Industrial Engineering, CPIE-2016, Dr B R Ambedkar National Institute of Technology Jalandhar-144011, India. Xuewen Wang, Bo Li, and Zhaojian Yang, Finite Element Analysis and Lightweight Optimization 73 Design on Main Frame Structure of Large Electrostatic Precipitator, Advances in Materials Science and Engineering Volume 2018. Alain Desrochers and Ahmed Maslouhi Design and Performance Based Optimization of an Aluminium 74 Structure Assembled using Elastic Fastening, Engineering Structures, 2017.

14 | P a g e

Caroline Goulart Campos, André Noronha de Oliveira, Alejandro Oscar Peralta, Ricardo Teixeira da Costa 75 Neto, Aldélio Bueno Caldeira, Suspension Parameters Estimation of a RWD Vehicle, SAE Technical Paper, 26th SAE BRASIL International Congress, 2017-36-0382, 2017. Yixiong Feng, Runjie Lu, Yicong Gao, Hao Zheng, Yushan Wang Wenjia Mo Multi-Objective Optimization 76 of VBHF in Sheet Metal Deep-Drawing Using Kriging, MOABC, and Set Pair Analysis, The International Journal of Advanced Manufacturing Technology, Online 28 Feb 2018, pp 1-12. Reza Setyo Darmawan, Agus Dwi Anggono and Abdul Hamid Die Design Optimization on Sheet Metal

Forming with Considering the Phenomenon of Springback to Improve Product Quality, The 2nd 77 International Conference on Engineering and Technology for Sustainable Development, Volume 154, 2018, online:28 February 2018. Gopireddy Akhil Kumar Reddy and Dr. G. Maruthi Prasad Yadav, Modelling and Analysis of Two 78 Wheeler Shock Absorber for Optimum Performance, International Journal of Engineering Trends and Applications, Volume 5, Issue 2, Mar-Apr 2018. Pp 7-13. A. AsifSha and Shaleena Manafuddin, Optimization of Sheet Metal Forming using Advanced Nature 79 Inspired Algorithm, International Journal of Engineering Science and Computing, November 2017, Vol.07, Issue 11, pp 15508-15514. Ch. Syam Kumar, B. Kiran Kumar, J. Kantha Rao and R. Anil Kumar Design Optimisation of a Steering 80 Knuckle Component Using Conservative Method of Finite Element Analysis, International Journal for Research in Applied Science & Engineering Technology, Volume 5, Issue XI, November 2017, pp 525-532. Omkar. S. Jagtap and Mathew. V. Karvinkoppa, Socio-Inspired Optimization-Cohort Intelligence 81 Algorithm, Vishwakarma Journal of Engineering Research, Vol. 2, Issue 1, March 2018, pp 41-45, ISSN: 2456-8465. Poulami Das, Sudip Kumar Naskara and Sankar Narayan Patra, Hardware efficient FIR filter design 82 using Global Best Steered Quantum Inspired Cuckoo Search Algorithm, Applied Soft Computing, Vol. 71, October 2018, pp 1-19. M. Sharma, G. Singh and R. Singh, Clinical Decision Support System Query Optimizer Using Hybrid 83 Firefly and Controlled Genetic Algorithm, Journal of King Saud University - Computer and Information Sciences, Available online 18 June 2018, pp 1-12. Raut Nikhil and N. S. Dharashivkar, Tensile Stress Analysis of Steering Knuckle of an Automobile 84 under Static Load, International Journal of Applied Engineering Research, Vol. 13, Issue 11, 2018, pp. 9241-9244. M. Goodarzi and Y Vander Heyden, Chromatographic Applications of Genetic Algorithms, 85 Chemometrics in Chromatography, edited by Lucasz Komsta, Yvan Vander Heyden and Joseph Sherma, 2018. C. A. Honkisch, M. V. P. Pessoa and J. Henseler, Engineering Change Management from the Viewpoint 86 of Corporate Reputation, International Design Conference - Design 2018. S. Prakash, K. Surendra Babu, M. Prabhahar, C. K. Mohammed Rasidh and S. M. Muhammadmarjan, 87 Design and Analysis of Strut Assembly Coil Spring By Various Materials Using Ansys, Journal of Industrial Pollution Control, Vol. 33, Issue 2, 2017, pp 1754-1758. Manpreet Kaur and Ravinder Kumar Overloading of Transmission Lines Management by using 88 Grasshopper Optimization Algorithm, International Journal of Scientific & Engineering Research Vol. 9, Issue 6, June-2018, pp 1086-1091. Evelyne Tran, A Novel Methodology for Identifying Root Causes and Lessons Learned to Reduce 89 Aerospace Cost and Schedule Overruns - Reimagining Risk Identification Performance Measures, M.Sc. Thesis submitted to École De Technologie Supérieure University, Du Québec, 2017. Agung Setyo Darmawan, Agus Dwi Anggono, and Abdul Hamid, Die Design Optimization On Sheet 90 Metal Forming With Considering The Phenomenon of Springback To Improve Product Quality, MATEC Web of Conferences 154, 01105, 2018, pp 1-4. Z.M. Yasin, N.F.A. Aziz, N.A. Salim, N.A. Wahab, N.A. Rahmat, Optimal Economic Load Dispatch using 91 Multi objective Cuckoo Search Algorithm, Indonesian Journal of Electrical Engineering and Computer

15 | P a g e

Science, Vol. 12, No. 01, 2018. S. A. Satpute and Dr. R. P. Chopade, A Review on Compensation of Spring Back in Sheet Metal 92 Bending Process, International Journal of Innovative Research in Technology, Volume 5, Issue 2, July 2018. Pp 7-11. Chandra Pal Singh and Geeta Agnihotri, Finite Element Analysis of Deep Drawing Process to 93 Investigate Effect of Friction, International Journal of Mechanical Engineering and Technology (IJMET), Vol. 8, Issue 10, October 2017, pp. 759–767. Yogesh Gaikwad, Maheshwar Badgujar, Suraj Bhange,, Swapnil Raut, and Prof. Nilesh Dhumal, Design, 94 Fabrication and Analysis of Helical Compression Spring, Journal of Emerging Technologies and Innovative Research, Vol. 5, Issue 2, February 2018, pp 510-512. Milica Ј. Tufegdžić, Creating of 3D Solid Model of The Human Hip Bone in the Case of Incomplete 95 Input Volumetric Data, doctoral dissertation, University of Niš Faculty Of Mechanical Engineering In Niš, 2017. Ling Wang, Ji Pei, Yalan Wen, Jiaxing Pi, Minrui, Fei, Panos M. Pardalos An Improved Adaptive Human 96 Learning Algorithm for Engineering Optimization, Computing, Available online 27 July 2018, In Press- Accepted Manuscript. Mandar S. Sapre, Anand J. Kulkarni, Lakshmanan Chettiar, Ishani Deshpande and Bharat Piprikar, Mesh 97 Smoothing of Complex Geometry Using Variations of Cohort Intelligence Algorithm, Evolutionary Intelligence, First Online: 17 August 2018, pp 1-16. Xiaoge Zhang, Emergent Computing and its Applications, International Journal of Parallel, Emergent 98 and Distributed Systems, 2018, DOI: 10.1080/17445760.2018.1489538 Manpreet Kaur and Er. Ravinder Kumar Overloading of Transmission Lines Management by Using 99 Grasshopper Optimization Algorithm, International Journal of Scientific & Engineering Research Vol. 9, Issue 6, June-2018. Pp 1086-1091. Jingmin Fana, Feng Wang, Qiuqin Sunb, Huisheng Ye and Qinji Jiang, Application of Polycrystalline 100 SnO2 Sensor Chromatographic System to Detect Dissolved Gases in Transformer Oil, Sensors and Actuators B Vol. 267, 2018, pp 636–646. N. Sathiya Narayanana, N. Baskar and M. Ganesan Multi Objective Optimization of machining 101 parameters for Hard Turning OHNS/AISI H13 material Using Genetic Algorithm, Materials Today: Proceedings, Vol.5 2018, pp 6897–6905. Tushar Y. Badgujar and Vijay P. Wani, Stamping Process Parameter Optimization with Multiple 102 Regression Analysis Approach, Materials Today: Proceedings, Vol. 5, 2018, pp 4498–4507. Ziyang Tian, Ying Yan, Yang Hong, Fangliang Guo, Jinxin Ye, Jie Li, Improved Genetic Algorithm for 103 Optimization Design of A Three-Dimensional Braided Composite Joint, Composite Structures, Vol. 206, December 2018, Pp 668-680. Jawahari Babu, Abdul Arif, L. Ravi Srinivas, B. Mahesh Babu Optimization of Helical Spring Weight 104 using Meta-Heuristic Algorithms, Trends in Machine Design, Vol 5, No 2, 2018 pp. Dieu Tien Bui, Nhat Duc Hoang and Viet-Ha Nhu, A Swarm Intelligence-Based Machine Learning Approach For Predicting Soil Shear Strength For Road Construction: A Case Study At Trung Luong 105 National Expressway Project, Engineering with Computers, First Online: 15 September 2018, pp 1-11. https://doi.org/10.1007/s0036 Gusel L.; Boskovic V. Domitner J. Ficko M. Brezocnik M. Genetic Programming Method for Modelling of 106 Cup Height in Deep Drawing Process, Advances in Production Engineering & Management, Vol. 13, No. 3, September 2018, pp 358–365. Bikramjit Podder, Prabas Banerjee K. Ramesh Kumar Nirmal Baran Hui Forward and Reverse Modelling 107 of Flow Forming of Solution Annealed H30 Aluminium Tubes, Neural Computing and Applications, Springer, pp 1–13, https://doi.org/10.1007/s00521-018-3749-x. Nair V.H., Acharya V., Dhavle S.V., Shastri A.S., Patel J. Minimization of Clearance Variation of a 108 Radial Selective Assembly Using Cohort Intelligence Algorithm. In: Kulkarni A., Satapathy S., Kang T., Kashan A. (eds) Proceedings of the 2nd International Conference on Data Engineering and Communication

16 | P a g e

Technology. Advances in Intelligent Systems and Computing, Vol 828. Springer, Singapore, 2019. Sapre M.S., Kulkarni A.J., Shinde S.S. Finite Element Mesh Smoothing Using Cohort Intelligence. In: Kulkarni A., Satapathy S., Kang T., Kashan A. (eds) Proceedings of the 2nd International Conference on 109 Data Engineering and Communication Technology. Advances in Intelligent Systems and Computing, vol 828. Springer, Singapore, 2019. Mohamed Elhoseny, K. Shankar, S. K. Lakshmanaprabu, Andino Maseleno, N. Arun kumar, Hybrid 110 Optimization with Cryptography Encryption For Medical Image Security in Internet of Things, Neural Computing and Applications, https://doi.org/10.1007/s00521-018-3801-x. N. Yu. Zuev, R. Sh. Khabibulin, D. V. Shikhalev, S. V. Gudin, Information Technology Of Expert Poll 111 Observation Of Oil And Gas Industrial Specialists For Prevention of Fire On Protection Objects, Fire and Explosion Safety, Vol. 27 No. 5, 2018, pp 17-25. Miguel Angel Funes Lora, Edgar Alfredo Portilla-Flores, Raul Rivera Blas, Emmanuel Alejandro Mercha´n Cruz1 and Manuel Farao´n Carbajal Romero Metaheuristic Techniques Comparison to Optimize 112 Robotic End-Effector Behaviour and its Workspace, International Journal of Advanced Robotic Systems, September-October 2018, pp 1–17. Paola Pimentel Barroso, Pedro Paulo de Andrade Júnior, Bibliometric Analysis And Systematic Review 113 For Engineering Change Management, Brazilian Journal of Production Engineering, Vol 4, No.3, pp 184- 205. Wei Zhang, Luling An, Peter Sherar and Wei Tian, Posture Optimization Algorithm for Large Structure 114 Assemblies Based on Skin Model, Mathematical Problems in Engineering, Vol. 2018, Article ID 9680639, pp 1-12. T Yifei, Z Meng, L Jingwei, L Dongbo, W Yulin Research on Intelligent Welding Robot Path 115 Optimization Based on GA and PSO Algorithms, IEEE Access, Date of Publication: 30 October 2018, pp1-1, DOI: 10.1109/ACCESS.2018.2878615. Dipti Kapoor Sarmah and Anand J. Kulkarni, Improved Cohort Intelligence—A High Capacity, Swift 116 and Secure Approach on JPEG Image Steganography, Journal of Information Security and Applications, Vol.45, April 2019, pp 90-106. Apoorva S. Shastri & Anand J. Kulkarni, Multi-Cohort Intelligence Algorithm: An Intra and Inter- 117 Group Learning Behaviour Based Socio-Inspired Optimisation Methodology, International Journal of Parallel, Emergent and Distributed Systems, Vol. 33, 2018, pp 675-715. Benjamin Vaissier, Jean-Philippe Pernot, Laurent Chougrani & Philippe Veroń Genetic-Algorithm Based 118 Framework for Lattice Support Structure Optimization in Additive Manufacturing, Computer Aided Design, Volume 110, May 2019, Pages 11-23. Thomas T. D. and Amanda D. Smith Stochastic Optimization for Integration of Renewable Energy 119 Technologies in District Energy Systems for Cost-Effective Use, Energies, Vol. 12, Issue 533, pp 1-26. Mehrdad Hosseinias and Javad Jafari Fesharaki, A Heuristic Approach for Optimization of Gearbox 120 Dimension, Journal of Modern Processes in Manufacturing and Production, Vol. 7, No. 2, Spring 2018, pp 17-39. Ibrahim Halil, Ahmet Sumnu and Mehmet Hanifi Dogru, A Review of Aerodynamic Shape Optimization 121 for a Missile, The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 2018, Vol. 4, Pp 94-102. J. Pavan Kumar, Dr R. Uday Kumar, B. Ramakrishna et al Formability of Sheet Metals – A Review, IOP 122 Conf. Series: Materials Science and Engineering Vol. 455, 2018, pp 1-7. T. Prasant and M. Gunasekaran, Effective Big Data Retrieval Using Deep Learning Modified Neural 123 Networks, Mobile Networks and Applications, Vol. 24, Issue 1, Feb. 2019, pp 282–294. S. Siva Prathyusha, K. Sujatha, D. Harshitha, D. Sharmila, Review on Cuckoo Search Algorithm 124 International Journal of Management, Technology and Engineering, Vol.8, Issue 11, Nov. 2018, pp 2740- 2744. Sunaina Verma and Puneet Bansal, Optimal Design of Digital Fractional Order Differentiator using 125 Updated Cuckoo Search Algorithm, International Journal of Applied Engineering Research, Vol. 13,

17 | P a g e

Number 8, 2018, pp 127-132.

K. Reza Kashyzadeh, G.H. Farrahi, M. Shariyat, M.T. Ahmadian, The Role of Wheel Alignment Over the 126 Fatigue Damage Accumulation in Vehicle Steering Knuckle, Vol. 3, Issue 1, September 2018, Page 21- 33. Amar Kumar Barik and Dulal Chandra Das, Expeditious Frequency Control of Solar 127 Photovoltaic/Biogas/Biodiesel Generator Based Isolated Renewable Micro Grid Using Grasshopper Optimisation Algorithm, IET Renewable Power Generation, Vol. 12 Issue 14, 2018, pp. 1659-1667. Shahrzad Saremi, Seyedehzahra Mirjalili, Seyedali Mirjalili and Jin Song Dong Grasshopper Optimization Algorithm: Theory, Literature Review, and Application in Hand Posture Estimation, In: Mirjalili S., 128 Song Dong J., Lewis A. (eds) Nature-Inspired Optimizers, Studies in Computational Intelligence, Vol 811. Springer, 2019. Quang-Thanh Bui, Manh Pham Van, Nguyen Thi Thuy Hang, Quoc-Huy Nguyen, Nguyen Xuan Linh, Pham Minh Hai, Tran Anh Tuan & Pham Van Cu, Hybrid Model to Optimize Object-Based Land Cover 129 Classification by Meta-Heuristic Algorithm: An Example for Supporting Urban Management In Ha Noi, Viet Nam, International Journal of Digital Earth, 2018. Balamurugan, S. and Arumugam, Optimal Spatial Fuzzy Clustering Algorithm Based ROI 130 Segmentation in Ultrasound Kidney Images, Journal of Computational and Theoretical Nanoscience, Vol. 15, Issue 9-10, September 2018, pp 2794-2804. Marouani, H., Hergli, K., Dhahri, H., & Fouad, Y. Implementation and Identification of Preisach Parameters: Comparison Between Genetic Algorithm, Particle Swarm Optimization, and Levenberg– 131 Marquardt Algorithm, Arabian Journal for Science and Engineering, 2019. doi:10.1007/s13369-019- 03727-8. Intan Harnila Abdullah, Mohamad Najmi Masri, Mohd Hasmizam Razali, and Mahani Yusoff, Characterization of Aluminum-Titanium Oxide-Nickel Oxide Hybrid Nanocomposite Prepared by 132 Powder Metallurgy, Conference: Materials Characterization Using X-Rays and Related Techniques, AIP Conference Proceedings 2068, 020052 (2019); https://doi.org/10.1063/1.5089351 Published Online: 06 February 2019 Jan 2019. Mirjalili, S. & Song Dong, J. Introduction to Nature-Inspired Algorithms, In book: Nature-Inspired 133 Optimizers, Springer Series on Fluorescence, 1–5. doi:10.1007/978-3-030-12127-3_1. Heming Jia, Xiaoxu Peng, Wenlong Song et al Multiverse Optimization Algorithm Based on Lévy Flight 134 Improvement for Multi threshold Colour Image Segmentation, IEEE Access, March 2019. DOI: 10.1109/ACCESS.2019.2903345.

Dr. Swati Godbole and Jaya Suryawanshi, Signalling Approached Based NoC Architecture for 135 Improving Quality of Service, Helix, Vol. 8, Issue 6, pp 4364-4369. Almuatasim M. Alfarras, Osman Nuri Uçan, Oğuz Bayat, Economic Dispatch Problem Including 136 Renewable Energy Using Multiple Methods, AURUM Journal of Engineering Systems and Architecture, Volume 2 - Issue 2 - Feb 2019, pp 85-107. Qi Bian and Xinmin Wang A Modified NSGA-II for Solving Control Allocation Optimization Problem in 137 Lateral Flight Control System for Large Aircraft, IEEE Access, January 2019, pp (99):1-1. DOI: 10.1109/ACCESS.2019.2894961. Chao Wang, Tiantang Yu, Jose Luis, Adaptive Chaotic Particle Swarm Algorithm for Isogeometric 138 Multi-Objective Size Optimization of FG Plates, Structural and Multidisciplinary Optimization, March 2019. Aurora Ramírez et al JCLEC-MO: A Java Suite for Solving Many-Objective Optimization Engineering 139 Problems, Engineering Applications of Artificial Intelligence, February 2019, DOI: 10.1016/j.engappai.2019.02.003. Helen Angmalisang Helen, Syaiful Anam, S. Abusini Leaders and Followers Algorithm for Constrained 140 Non-Linear Optimization, Indonesian Journal of Electrical Engineering and Computer Science, Vol.13, No.1, January2019, pp. 162~169, DOI: 10.11591/ijeecs.v13.i1.pp162-169.

18 | P a g e

Oscar Danilo Montoya, Walter Gil-González and Luis F. Grisales-Nore˜na, Optimal Power Dispatch of 141 DGs In DC Power Grids: A Hybrid Gauss-Seidel-Genetic-Algorithm Methodology for Solving the OPF Problem, WSEAS Transactions on Power Systems, Vol. 13, 2018.

Addisalem Genta and D K Lobiyal, Energy Efficient Hybrid FCM and Cuckoo optimization-based 142 clustering Technique for Wireless Multimedia Sensor Network, International Journal of Computer Science and Network, Vol. 8, Issue 1, February 2019.

Dr. Swati Godbole and Jaya Suryawanshi, Signalling Approach Based NoC Architecture for Improving 143 Quality of Service, Helix Vol. 8, No.6, 2018, pp 4364- 4369. A.B. Kale, S. V. Tamhane, A. S. Totre, P. S. Wayal, S.B. Patait, Magnetic Shock Absorber, International 144 Journal of Advance Engineering and Research Development, Vol. 5, Special Issue 04, Feb.-2018, pp 1-3. Alieksieiev V., Air Space Routing and Flights Planning: A Problem Statement and Discussion of 145 Approaches to Solution, International Scientific Journal Mathematical Modelling, YEAR II, No. 4, 2018, pp 139-142. Thomas T. D. Tran and Amanda D. Smith, Stochastic Optimization for Integration of Renewable 146 Energy Technologies in District Energy Systems for Cost-Effective Use, Energies, Vol.12, No. 533, 2019, pp 1-29. Chao Wang, Tiantang Yu et al, Adaptive Chaotic Particle Swarm Algorithm for Iso Geometric Multi 147 Objective Size Optimization of FG Plates, Structural and Multidisciplinary Optimization, online 15 Feb 2019. Meeta Kumar and Anand Kulkarni, Socio Inspired Optimization Metaheuristics: A Review, in book 148 Socio-Cultural Inspired Metaheuristics, January 2019. Heming Jia, Xiaoxu Peng, Wenlong Song, Chunbo Lang, Zhikai Xing, and Kangjian Sun, Hybrid 149 Multiverse Optimization Algorithm with Gravitational Search Algorithm for Multi threshold Color Image Segmentation, IEEE Access, Vol. XX, 2019. Mandar Sapre, Harsh Patel, Kishan Vaishnani, Raj Thaker and Apoorva Shastri, Solution to Small Size 150 0-1 Knapsack Problem Using Cohort Intelligence with Educated Approach, in book Socio-Cultural Inspired Metaheuristic, January 2019. Duygu Kaya Optimization of SVM Parameters with Hybrid CS-PSO Algorithms for Parkinson’s 151 Disease in LabVIEW Environment Parkinson’s Disease, Vol. 2019, Article ID 2513053, pp 1-9. Nada El Gmili, Mostafa Mjahed, Abdeljalil E Kari and Hassan Ayad Particle Swarm Optimization and 152 Cuckoo Search- Based Approaches for Quadrotor Control and Trajectory Tracking, Applied Sciences, Vol. 9, 2019, doi:10.3390/app9081719. Shen Yuong Wong, Keem Siah Yap and Chin Hooi Tan Hybrid Genetic Algorithm based Fuzzy Inference 153 System for Data Regression, 2018 IEEE Conference on Systems, Process and Control (ICSPC) December 2018 Rowida Ali AL Amry and Ghaleb AL-Gaphari, Survey on Recent Bio-Inspired Optimization Algorithms, 154 International Journal of Computer Science and Network, Volume 7, Issue 6, December 2018. Heming Jia, Jinduo Li, Wenlong Song, Xiaoxu Peng, Chunbo Lang and Yao Li, Spotted Hyena 155 Optimization Algorithm with Simulated Annealing for Feature Selection, IEEE Access May 2019, In Press, DOI: 10.1109/ACCESS.2019.2919991. Adriana Mejia Héctor Fabio Quintero-Riaza Miguel Díaz-Rodríguez, Synthesis of Planar Parallel 156 Manipulators Including Dexterity, Force Transmission and Stiffness Index, Mechanics Based Design of Structures and Machines, May 2019, DOI: 10.1080/15397734.2019.1615503. Sameer Nagpal, Neeraj Dahiya, Dr. Surjeet Dalal Comparison of Task Scheduling in Cloud Computing 157 Using Various Optimization Algorithms, Journal of Computational Information Systems Vol.14, Issue 4, 2018, pp 43-57. A. S. Silitongaa, A. H. Shamsuddinb, T. M. I. Mahliac, Jassinne Milanod, Efaa F. Kusuma, Joko Siswantoro, S. Dharma, A. H. Sebayang, H. H. Masjuki, Hwai Chyuan Ong Biodiesel Synthesis from 158 Ceiba Pentandra Oil by Microwave Irradiation-Assisted Transesterification: ELM Modelling and Optimization, Renewable Energy, https://doi.org/10.1016/j.renene.2019.07.065.

19 | P a g e

Nada El Gmili, Mostafa Mjahed, Abdeljalil El kari and Hassan Ayad, Quadrotor Identification Through 159 the Cooperative Particle Swarm Optimization-Cuckoo Search Approach, Computational Intelligence and Neuroscience, Vol. 2019, pp 1-10, DOI:10.1155/2019/8925165. Shahed Shahrestani, Ahmad Reza Mokhtari, Moslem Fatehi The Use of Unmixing Technique in Stream 160 Sediment Geochemical Exploration, Journal of Geochemical Exploration, Available online 16 July 2019, 106339, In Press, Journal Pre-proo. Nadežda ČUBOŇOVÁ, Tomáš DODOK, Zuzana, Ságová Optimisation of The Machining Process Using 161 Genetic Algorithm, Scientific Journal of Silesian University of Technology, Series Transport 104:15-25 DOI: 10.20858/sjsutst.2019.104.2, September 2019. T. Ganesan and Pandian Vasant Lévy-Enhanced Swarm Intelligence for Optimizing a Multi objective 162 Biofuel Supply Chain, Handbook of Research on Smart Computing for Renewable Energy and Agro- Engineering, Pages: 23, DOI: 10.4018/978-1-7998-1216-6.ch012. Lei Cao, Jie li, Yuanyuan Zho, Automatic Feature Group Combination Selection Method Based on GA 163 For The Functional Regions Clustering In DBS, Computer Methods and Programs in Biomedicine, September 2019, DOI: 10.1016/j.cmpb.2019.105091. Borys Liubarskyi, Natalia Lukashova, Oleksandr Petrenko, Tetyana Pavlenko, Dmytro Iakunin, Sergiy Yatsko, Yaroslav Vashchenko, Devising A Procedure to Choose Optimal Parameters for The 164 Electromechanical Shock Absorber For A Subway Car, Eastern European Journal of Enterprise Technologies, August 2019, DOI: 10.15587/1729-4061.2019.176304. Venkateshwar Reddy P., Mohana Krishnudu D., Pranavi U., Janaki Ramulu P. Optimization of the Forming Parameters in U-Bending for Punch Force and Spring back Using Taguchi Method. In: 165 Narayanan R., Joshi S., Dixit U. (eds) Advances in Computational Methods in Manufacturing. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, 2019, pp 75-84. Timothy Ganesan, Pandian Vasant and Igor Litvinchev Multi objective Optimization of a Biofuel Supply 166 Chain Using Random Matrix Generators, Source Title: Deep Learning Techniques and Optimization Strategies in Big Data Analytics, IGI Global. Shubhajit Das, Muthumari Chandrasekaran and Sutanu Samanta, Investigations on Wire Electric Discharge Machining of Hybrid Nano Metal Matrix Composites (AA6061/Sic/B4C) For 167 Industry Need Based Multi-Response Optimization, Engineering Research Express, online 31 October 2019. Deepika Jain, Piyush Kumar Shukla, Optimization Techniques In WSNS: A Review, International 168 Journal of Scientific & Technology Research, Vol. 8, Issue 10, October 2019, ISSN 2277-8616. Seyedali Mirjalili, Shahrzad Saremi, Seyedehzahra Mirjalili, and Jin Song Dong, Grasshopper Optimization Algorithm: Theory, Literature Review, and Application in Hand Posture Estimation in 169 book Nature Inspired Optimizers, Studies in Computational Intelligence, edited by Seyedali Mirjalili, Jin Song Dong and Andrews Lewis, Springer, August 2018. N. Priya and Pankajavalli P. B. Distributed Energy Efficiency for Fault Tolerance Using Cuckoo Search 170 in Wireless Sensor Networks, In book: Sustainable Communication Networks and Application, January 2020, DOI: 10.1007/978-3-030-34515-0_75. Dipti Kapoor Sarmah, A Survey on the Latest Development of Machine Learning in Genetic 171 Algorithm and Particle Swarm Optimization, in book: Optimization in Machine Learning and Applications, pp. 91-112, 10.1007/978-981-15-0994-0_6. Vamasi Nagaraju, M. Jagapathi Raju and Ch. Durga Prasad, Prediction of California Bearing Ratio 172 Using Particle Swarm Optimization, In book: Soft Computing for Problem Solving, pp.795-803, January 2020, DOI: 10.1007/978-981-15-0035-0_65. Hardimuko Seto Aji, Bobby Oedy Pramoedyo Soepangkat, Budi SantosaRachmadi Norcahyo, Multi Objective Optimization of Vulcanization Process Parameters For Reducing Quality Loss Cost Based On BPNN-PSO Method, Conference Paper in AIP Conference Proceedings 2114(1):020012 · June 2019, 173 DOI: 10.1063/1.5112396, Conference: EXPLORING RESOURCES, PROCESS AND DESIGN FOR SUSTAINABLE URBAN DEVELOPMENT: Proceedings of the 5th International Conference on Engineering, Technology, and Industrial Application (ICETIA) 2018. 20 | P a g e

Miroslaw Blocho, Heuristics, Metaheuristics, And Hyperheuristics For Rich Vehicle Routing 174 Problems, Book chapter in Smart Delivery Systems Solving Complex Vehicle Routing Problems, edited by Jakub Nalepa, 2020, Pages 101-156, Elsevier, 10.1016/B978-0-12-815715-2.00009-9. Bryar A. Hassan and Tarik A. Rashid, Operational Framework for Recent Advances in Backtracking Search Optimisation Algorithm: A Systematic Review and Performance Evaluation, Applied 175 Mathematics and Computation, Applied Mathematics and Computation, Available online 29 November 2019. DOI: https://doi.org/10.1016/j.amc.2019.124919. Yongjin Liu , Xihong Chen, and Yu Zhao, Prototype Filter Design Based On Channel Estimation For 176 FBMC/OQAM Systems, Mathematical Problems in Engineering, Vol. 2019, Article ID 3730759, pp 1- 11.DOI: 10.1155/2019/3730759. Mohamad Khairuzzaman, Mohamad Zamani, Ismail Musirin, Saiful Izwan Suliman, Sharifah Azma Syed 177 Mustaffa, Chaotic Immune Symbiotic Organisms Search Algorithm for Solving Optimisation Problem, International Journal of Engineering & Technology, Vol.7, No.3-15, 2018, pp 73-79. Noor Fazreen Ahmad Fuzi, Firas Basim Ismail, Intelligent Maintenance Prioritization and 178 Optimization Strategies for Thermal Power Plant Boilers, International Journal of Recent Technology and Engineering, Vol. 8 Issue-3S, October 2019. Brahim Mahiddini, Taha Chettibi, Khaled Benfriha, Ameziané Aoussat Optimum Design of a Spur Gear 179 Using a Two-Level Optimization Approach, MECHANIKA, Vol. 25, No. 4, 304-312, 2019. Shekhar Yadav, Review on Design & Fabrication of Magnetic Suspension, International Journal of 180 Innovative Research in Science, Engineering and Technology, Vol. 7, Issue 10, October 2018. Yogesh Gaikwad, Maheshwar Badgujar, Prof. Nilesh Dhumal, Design of Helical Compression Spring for 181 Front Bumper, International Journal of Scientific & Engineering Research, Vol. 4 Issue 4 – APRIL 2018 ISSN [ONLINE]: 2395-1052. M. Cavallonea, A. Flaccoa, V. Malkaa, Shaping of A Laser-Accelerated Proton Beam for Radiobiology 182 Applications Via Genetic Algorithm, European Journal of Medical Physics, Vol. 67, November 2019, Pages 123–131. Arka Roy Choudhury, Ayan Banerjee, Saurav Dutt, Sibasish Sinha, Studying the Effect of Electroless 183 Nickel Coating on Helical Compression Springs by Finite Element Analysis, International Journal of Engineering Research & Technology, Vol. 6, Issue 10, October – 2017, ISSN: 2278-0181. Ángel Chavarin, Jorge Gálvez and Omar Avalos, Image Thresholding with Metaheuristic Algorithms for 184 Cerebral Injuries, Applications of Hybrid Metaheuristic Algorithms for Image Processing, Studies in Computational Intelligence book series, pp 457-471, First Online: 28 March 2020. Shiqiang Zhao, Deguo Zeng, Wenhai Wang, Xinwei Chen, Zeyin Zhang, Fuyuan Xu, Xuanyu Mao and 185 Xinggao Liu, Mutation Grey Wolf Elite PSO Balanced Xgboost For Radar Emitter Individual Identification Based 0n Measured Signals, Measurement, Vol. 159, 15 July 2020. J. M. Altmemi, R. R. Othman, R. Ahmad and A. S. Ali, Implementation of Sine Cosine Algorithm (SCA) 186 for Combinatorial Testing, IOP Conference Series: Materials Science and Engineering, Vol. 767, 1st International Symposium on Engineering and Technology, 2019 23 December 2019, Perlis, Malaysia. M. Divyavani and Dr. G. Kalpana, An Analysis on Recent Innovations in Nature Cuckoo Optimization 187 Algorithm, Sustainable Humanosphere, Vol.16, Issue 1, March 2020. Mazen Alowish, Yoshiaki Shiraishi, Yasuhiro Takano, Masami Mohri and Masakatu Morii, A Novel Software-Defined Networking Controlled Vehicular Named-Data Networking for Trustworthy 188 Emergency Data Dissemination and Content Retrieval Assisted by Evolved Interest Packet, International Journal of Distributed Sensor Networks, Vol. 16, Issue 3, 2020. Candelieri Antonio Sequential Model Based Optimization of Partially Defined Functions Under 189 Unknown Constraints, Journal of Global Optimization, Published online 02 December 2019. J. M. García, C. A. Acosta and M. J. Mesa, Genetic Algorithms for Mathematical Optimization, Journal 190 of Physics: Conference Series, Volume 1448, II Workshop on Modelling and Simulation for Science and Engineering (II WMSSE) 24–26 September 2019, Cartagena de Indias, Colombia. Keerachat Tantrapon Peerapol Jirapong Panida Thararak, Mitigating Microgrid Voltage Fluctuation 191

21 | P a g e

Using Battery Energy Storage System with Improved Particle Swarm Optimization, Energy Reports, Vol. 6, No. 2, February 2020, Pages 724-730. Dipti Kapoor Sarmah Anand J. Kulkarni and Ajith Abraham, Heuristics and Metaheuristic 192 Optimization Algorithms, Optimization Models in Steganography Using Metaheuristics, Springer, pp 49- 61, First Online: 26 February 2020. Dipti Kapoor Sarmah Anand J. Kulkarni and Ajith Abraham, Cohort Intelligence with Cognitive Computing (CICC) and Modified-Multi Random Start Local Search (M-MRSLS) Optimization 193 Algorithms for JPEG Image Steganography, Optimization Models in Steganography Using Metaheuristics, Springer, pp 63-89, First Online: 26 February 2020. Bo Yanga, Jingbo Wang, Xiaoshun Zhang, Tao Yu, Wei Yao, Hongchun Shu Fang Zeng, Liming Sun, 194 Comprehensive Overview of Meta-Heuristic Algorithm Applications on PV Cell Parameter Identification, Energy Conversion and Management, Vol. 208, 15 March 2020. Kasra Mohammadi, Yazhou Jiang, Soheyl Borjian Kody Powella, Thermo-Economic Assessment and 195 Optimization of A Hybrid Triple Effect Absorption Chiller and Compressor, Sustainable Energy Technologies and Assessments, Vol. 38, April 2020. Diana Carolina Iregui Betancourt, Anderson Sanchez, Change Management and Management Systems - 196 A Literature Review, Master's students in quality and comprehensive management. Mokhtar Ghazouani, Mohsine Bouya Mohammed Benaissaa, Thermo-Economic and Exergy Analysis 197 and Optimization of Small PTC Collectors for Solar Heat Integration In Industrial Processes, Renewable Energy, Vol. 152, June 2020, Pages 984-998. Antonio Candelieri, Bruno Galuzzi, Ilaria Giordani, Riccardo Perego, Francesco Archetti. Optimizing Partially Defined Black-Box Functions Under Unknown Constraints Via Sequential Model Based Optimization: An Application to Pump Scheduling Optimization in Water Distribution Networks, 198 Learning and Intelligent Optimization: 13th International Conference, LION 13, Springer Nature, 2020 Chania, Crete, Greece, May 27-31, 2019. Edited By- Nikolaos F. Matsatsinis, Yannis Marinakis, Panos Pardalos Zhan Cao, Yong Chen, Libin Zang, Model-Based Transmission Acoustic Analysis and Improvement, 199 Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, First Published January 21, 2020. Erturun, V., Çetin, S. & Sahin, O. Investigation of Microstructure of Aluminum Based Composite 200 Material Obtained by Mechanical Alloying, Metals and Materials International, 2020, Published: 04 January 2020 https://doi.org/10.1007/s12540-019-00583-x. K. Umurani and R.A. Siregar, Development of Dynamometer for Cutting Force Measurement in 201 Turning Operation, 5th International Conference on Man Machine Systems, IOP Conf. Series: Materials Science and Engineering 705 (2019). Saremi S., Mirjalili S., Mirjalili S., Song Dong J. (2020) Grasshopper Optimization Algorithm: Theory, 202 Literature Review, and Application in Hand Posture Estimation. In: Mirjalili S., Song Dong J., Lewis A. (eds) Nature-Inspired Optimizers. Studies in Computational Intelligence, Vol 811. Springer, Cham. Timothy Ganesan, Pandian Vasant, Pratik Sanghvi, Joshua Thomas, Igor Litvinchev, Random Matrix 203 Generators for Optimizing a Fuzzy Biofuel Supply Chain System, Journal of Advanced Engineering and Computation, Vol. 4, No. 1, March 2020. Chavarin Á., Gálvez J., Avalos O. (2020) Image Thresholding with Metaheuristic Algorithms for 204 Cerebral Injuries. In: Oliva D., Hinojosa S. (eds) Applications of Hybrid Metaheuristic Algorithms for Image Processing. Studies in Computational Intelligence, vol 890. Springer, Cham. Zaheeruddin & Kavita Singh Intelligent Fractional-Order-Based Centralized Frequency Controller for 205 Microgrid, IETE Journal of Research, Published online: 02 Mar 2020. Samira Sarvari, Nor Fazlida Mohd Sani, Zurina Mohd Hanapi, Mohd Taufik Abdullah An Efficient 206 Anomaly Intrusion Detection Method with Feature Selection and Evolutionary Neural Network

FIELDS OF INTEREST

22 | P a g e

CAD/CAM/CAE, Product Life Cycle Management, Sheet Metal Forming, Bioinspired Optimization Techniques, Micro Forming.

◄ ACADEMIC ACHIEVEMENTS ►

© Passed Elementary Grade Drawing Examination in 1990, Conducted by Director of Arts, Government of Maharashtra. © Passed Elementary Examination in English in 1990, Conducted by Tilak Maharashtra Vidyapeeth, Pune. © Passed Junior Examination in English in 1990, Conducted by Tilak Maharashtra Vidyapeeth, Pune.

© Passed Dwitiya & Tritiya Examinations in Sanskrit in 1991 and 1992 conducted by Maharashtra Vidyapeeth, Mumbai.

© Completed Three Years Curriculum of Bharat Scouts & Guides during 1990 to 1993.

© Won first prize in Marathi Essay Competition during Annual Gathering in 1998-99.

© Passed Maharashtra State Certificate in Information Technology (MS-CIT) Examination, Conducted by Maharashtra State Board of Technical Education, Mumbai.

◄ ADDITIONAL RESPONSIBILITIES SHOULDERED ► AT GRAMIN POLYTECHNIC, NANDED

♫ Worked as Library in charge from September 1999 to August 2003 ♫ Worked as Coordinator of programs on Environment Awareness in the year 1999-2000 & 2000-2001 under National Environment Awareness Campaign [NEAC] Sponsored by Ministry of Environment and Forests, Government of India ♫ Worked as Coordinator of Cultural Activities from July 2000 to January 2006 ♫ Worked as a Chief Editor of the Students Wall Magazine “ASMITA” from August 2000 to January 2006. ♫ Worked as a Chief Editor of the Annual Magazine “SPANDAN” in the year 2001-2002 ♫ Worked as Coordinator of Mechanical Engineering Students Association MESA for academic year 2004-2005 ♫ Worked as a Member of Advisory Committee for National Service Scheme (NSS) for the academic year 2004-2005 and 2005-2006 ♫ Worked as Sealing Supervisor as well as Recording and Billing Supervisor for the Examinations of Maharashtra State Board of Technical Education, Mumbai ♫ Worked as Examiner for Maharashtra State Board of Technical Education, Mumbai for assessing the theory examination papers. ♫ Worked as Controller for Maharashtra State Certificate in Information Technology (MS-CIT) Examination, Conducted by Maharashtra State Board of Technical Education, Mumbai. ♫ Worked as Member of Vigilance Squad for Maharashtra State Certificate in Information Technology (MS-CIT) Examination, Conducted by Maharashtra State Board of Technical Education, Mumbai. AT S. G. G. S. INSTITUTE OF ENGINEERING & TECHNOLOGY, NANDED ♫ Worked as Member of Editorial Board for annual magazine Drishti at Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded in 2005-2006. AT VIDYA PRATISHTHANS COLLEGE OF ENGINEERING, BARAMATI ♫ Worked as Member of Organizing Committee for annual gathering NABHANGAN in 2006-2007, 2007-2008 and 2008-2009 ♫ Working as lab in charge of CAD lab since August 2006 and made investment of 25 lacs ♫ Worked as department Unit Test Coordinator in academic year 2006-2007 & 2007-2008 ♫ Worked as Verification Officer for FE centralized admissions at Application Receipt Center ♫ Worked as department Library Coordinator in academic year 2008-2009 & 2009-2010 ♫ Worked ad Library Committee Member in academic year 2008-2009 & 2009 - 2010 ♫ Working as an Auditor of Quality System ISO 9001:2000 ♫ Worked as Technical Paper Presentation Coordinator at department level in academic year 2007-2008 and 2008- 2009 ♫ Worked as staff coordinator for Technical event ROBOFEST in 2009-2010 AT DNYANGANGA COLLEGE OF ENGINEERING & RESEARCH, PUNE

23 | P a g e

♫ Worked as lab in charge of CAD/CAM lab for academic year 2011-2012. ♫ Developed well equipped, sophisticated Seminar Hall worth 25 Lacs and Working as in charge since academic year 2011-2012. ♫ Worked as lab in charge of PG CAD/CAM lab for academic years 2012-2014. SAVITRIBAI PHULE PUNE UNIVERSITY APPOINTMENTS ♫ Working as Chairman of Product Design & Development – B. E. Mechanical 2003 course & 2008 course from AY 2010-2011 to 2017-2018. ♫ Working as Chairman of Product Life Cycle Management – B. E. Mechanical 2008 course since AY 2011-2012 to 2013-2014. ♫ Worked as Chairman of Geometric Modeling - S. E. Mechanical in AY 2012-2013. ♫ Working as Chairman of Computer Aided Design – M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Integrated Product Design and Development – M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Product Life Cycle Management – M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Automated Manufacturing System Modeling – M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Optimization Techniques – M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Computer Integrated Manufacturing – M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Simulation and Modeling – M.E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of CAD/CAM Practices in Metal Forming – M.E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2012-2013. ♫ Working as Chairman of Lab Practice – I, M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2013-2014. ♫ Working as Chairman of Lab Practice – II, M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2013-2014. ♫ Working as Chairman of Seminar – I, M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2013-2014. ♫ Working as Chairman of Seminar – II, M. E. Mechanical Computer Aided Design, Manufacture & Engineering since AY 2014-2015. ♫ Working as Chairman of Computer Aided Engineering – M.E. Design Engineering since AY 2012-2013. ♫ Worked as Member of Vigilance Squad during May/June 2011 examinations AT MAHARASHTRA INSTITUTE OF TECHNOLOGY, PUNE/MIT WORLD PEACE UNIVERSITY, PUNE

♫ Working as Coordinator for Mentor-Mentee Scheme for AY 2015-16, 2016-2017 and 2017-2018. ♫ Worked as Liaison Officer of Mr. Gaurishankar Agrawal, Hon. Speaker of Chhattisgarh Vidhan Sabha Speaker for Bharatiya Chatra Sansad 2016. ♫ Worked as Liaison Officer of Mr. Vijay Goel, Hon. Union Minister Youth Affairs and Sports for Bharatiya Chatra Sansad 2017. ♫ Worked as Liaison Officer of Mr. Raju Anthena, Director, Blue Pal Software Solutions, Hyderabad for World Peace Summit 2017. ♫ Worked as in charge for admission counselling of Dr. Vishwanath Karad MIT World Peace University. ♫ Worked as Coordinator of Registration Team, for admission counselling of Dr. Vishwanath Karad MIT World Peace University, 2017. ♫ Worked as Custodian for Savitribai Phule Pune University Examinations in AY 2016-2017. ♫ Worked as College Examination Officer for Savitribai Phule Pune University Examinations in AY 2017-2018, Semester-I. ♫ Worked as External Senior Supervisor for Savitribai Phule Pune University Examinations in Nov/Dec 2017

24 | P a g e

Examination at Cummins College of Engineering for Women, Pune. ♫ Worked as Liaison Officer of Dr. Ken Shaw, President of Southwestern Adventist University, Texas, US, for National Teachers Congress, 2018 ♫ Worked as Liaison Officer of Dr. Adya Prasad Pande, Hon. Vice Chancellor of Manipur University, for Bharatiya Chatra Sansad 2018. ♫ Worked as Core Team Member – Admissions and I/C-Exhibitions of Dr. Vishwanath Karad MIT World Peace University. ♫ Worked as Coordinator of Registration Team, for admission counselling of Dr. Vishwanath Karad MIT World Peace University, 2018. ♫ Worked as Custodian for Savitribai Phule Pune University Examinations in AY 2017-2018, Semester-II. ♫ Worked as NBA Co-Coordinator for Accreditation Visit 2018. ♫ Working as Faculty Advisor of Association of Students of Mechanical Engineering from AY 2018-2019. ♫ Worked as Liaison Officer of Dr. Ayhan Dovuk, Founder Ay Do Solutions, Istanbul, Turkey. ♫ Working as PG Coordinator of M.Tech. Mechanical-CAD/CAM/CAE from AY 2018-2019. ♫ Worked as Member of Reviewing Committee for National Teachers Congress 2019.

♫ Organized one day National Workshop on Artificial Intelligence in association with ABVP, Pune and Srijan on 12th January 2019 at Indian Institute of Science Education and Research, Pune. ♫ Worked as Liaison Officer of Dr. Abhay Firodiya Chairman, Force Motors, Pune. ♫ Worked as Liaison Officer of Dr. F.C. Kohli Former Chairman, TCS, Pune.

TECHNICAL TRAINING PROGRAMS & WORKSHOPS ATTENDED SR TITLE DURATION SPONSORED BY ORGANIZED BY One Week AICTE & ISTE, New Government College of 01 DACUM-Design a Curriculum 28 June – 02 July Delhi Engineering, Amravati 2004 Computational Fluid Flow & Two weeks AICTE & ISTE, New Government College of 02 Heat Transfer 03-15 Jan 2005 Delhi Engineering, Pune Modeling And Simulation of Engineering One Week AICTE, New Delhi Government College of 03 Systems with Multi Energy 09-15 January [under TEQIP] Engineering, Aurangabad Domains: A 2006 Bond Graph Approach Three days Shri Guru Gobind Singhji Participative Teaching 04 17-19 February ----- Institute of Engineering & Techniques 2006 Technology, Nanded

Shri Guru Gobind Singhji Three days AICTE, New Delhi 05 Product Lifecycle Management Institute of Engineering & 10-12 March 2006 [under TEQIP] Technology, Nanded

Genetic Algorithms for Three days Indian Institute of 06 ----- Engineering Optimization 26- 29 April 2006 Technology, Kanpur

INDO-US Workshop on Three days Indo-US Science Indian Institute of 07 Computational Optimization 06- 09 February Technology Forum Technology, Kanpur and Analysis of Systems 2006

Three days National Institute of V.P.C.o.E. 08 Motivation & staff Development 27-29 December Technical Teachers Baramati 2007 Training Institute, Bhopal

National Institute of Effective Teaching Skills & Two weeks V.P.C.o.E. 09 Technical Teachers Innovations in Teaching 04-13 June 2008 Baramati Training Institute, Bhopal

One day College of Engineering, 10 Enabling FEA into Curriculum Altair Software 15/10/2008 Pune

Two days Dale Carnegie & 11 High Impact Teaching Skills 02-03 February Wipro Associates, Inc. Trainer 2009

25 | P a g e

Fundamentals of Signal One day Vidya Pratishthan’s College 12 ----- Processing & Applications 09/03/2009 of Engineering, Baramati

Optimization Methods for One day College of Engineering, 13 ---- Research & Industrial Problems 21/03/2009 Pune

Realistic Simulation for One day Maharashtra Institute of 14 EDS Technologies Engineering Quality 09/07/2009 Technology, Pune

Mission10X in Teaching & One day 15 Wipro Technologies Wipro Technologies Learning 23/07/2009 Process Plant & Sinhgad Institute of Process Equipment One week 16 Machinery Technology, Design 19-23 April 2010 Association of India Lonavala, Pune

MatLab & Simulink for One day 17 Mathworks Mathworks Engineering Education 10/03/2011

One day Trinity College of 18 Computer Graphics IFS Academy, Pune 29/07/2011 Engineering, Pune One day SRES College of 19 OpenGL ---- 20/08/2011 Engineering, Kopargaon Master Cam-Robot PVG,s College of Two days 20 Programming & Applications KUKA Robotics, Pune Engineering & Technology, 27-28 Aug 2011 with KUKA Pune

Two days Indian Institute of College of Engineering, 21 Introduction to Robotics 01-02 Oct 2011 Technology, Mumbai Pune 26-28 December Dassault Systems, 3d PLM Software 22 PLM Orientation Workshop 2011 India Solutions, Pune

Advanced Finite Element Sinhgad Institute of Three Days 23 Methods: Theory and University of Pune Technology & Science, 15-17 March 2012 Applications with ANSYS Narhe, Pune Defense Institute of Emerging Technologies in Micro Three Days Department of 24 Advanced [DIAT] & Nano Manufacturing 12-14 June 2012 Atomic Energy Technology, Pune One Day Srijan, Centre for College of Engineering, 25 Industry-Institute Interaction 11/08/2012 Dipex Pune. Three Days Maharashtra Energy Dnyanganga College of Green Technology: Solar- Wind 26 29-31 January Development Engineering & Research, Hybrid Energy Systems 2013 Authority Pune In-House Solutions Advanced CNC & Robotics One Day Onward Technologies 27 Incorporations Programming and Learning Aids 06/03/2013 Limited, Pune Canada One Week Saraswati College of Recent Innovations in Civil and Approved by ISTE 28 16 - 20 December Engineering, Khargar, Mechanical Engineering New Delhi 2013 Mumbai Three Days Finite Element Analysis & Keystone School of 29 27 - 29 December University of Pune Computational Fluid Dynamics Engineering, Pune 2013 Yadawrao Tasgaonkar One Day 30 Product Design & Development --- College of Engineering & 07th January 2014 Management, Navi Mumbai Operation, Maintenance & Ministry of New & Trouble Shooting of Three Days Zeal Education Society, 31 Renewable Energy, Concentrated Solar Technology 24 – 26, Feb 2014 Pune Government of India [CST] based Systems One Day 32 Springer Summit on Materials Springer Materials Springer Materials 13 Aug 2014 Mastercam X8 Technology Roll 33 10 Sept 2014 Mastercam Onwards Technology, Pune Out & Innovation Day

26 | P a g e

Advances and Recent Trends in Three Days Savitribai Phule Cummins College of 34 Industrial Hydraulics 08 – 10 Dec 2014 Pune University Engineering, Pune

Two Days Association of Designers, 35 Pune Designers Festival Autodesk India 26 – 27 Feb 2016 India. One Day 36 Optimization in Engineering --- SGGSIE & T, Nanded 08 Oct 2016

Three Days BETiC IIT BJ Government Medical 37 Biomedical Instrumentation 21-23 July 2017 Bombay College, Pune

Two Days MIT World Peace 38 Pedagogy --- 21-22 Nov. 2018 University, Pune

One Week Optimization and Optimal College of Engineering, 39 03-07 Dec. TEQIP Control: A Data Base Approach Pune 2018 Challenges and Opportunities Two Days Savitribai Phule in Processing and MKSS’s Cummins College 40 14-15 Dec. Pune University, Characterization of Composite of Engineering, Pune. 2018 Pune Materials Automotive Product One Week SAEINDIA Western Maharashtra Institute of 41 Development and Best 06-10 Section and AICTE, Technology, Pune Manufacturing Practices Feb. 2019 New Delhi Advances in Sheet Metal Two Days Friedrich Alexander Indian Institute of 42 Forming Processes for 04-05 Feb Universitat, Technology, Delhi Automotive Components 2020 Erlangen, Nurnberg Institution of Defence Institute of One Day 43 Additive Manufacturing Engineers, Pune Advanced Technology, 15 Feb 2020 Local Centre Pune

◄ INTERACTION WITH OTHER ACADEMIC INSTITUTIONS ► ♫ Indian Institute of Technology, Powai - Technically Sponsored B.E. Projects. ♫ Defense Institute of Advanced Technology, Pune – Member of Technical Evaluation Committee for Purchase of Equipment’s. ♫ Defense Institute of Advanced Technology, Pune – Member of Selection Committee for recruitment of Junior Research Fellow and Senior Research Fellow. ♫ Rai University, Ahmadabad – Referee for Ph.D. Thesis Examination. ♫ Rajarambapu Institute of Technology, Islampur – External Examiner for Assessment of M. Tech. Dissertations. ♫ College of Engineering, Pune – Member of Examiner Panel for Assessment of M. Tech. Dissertations. ♫ Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded - Member of Examiner Panel for Assessment of M. Tech. Dissertations. ♫ Maharashtra Institute of Technology, Aurangabad - Member of Examiner Panel for Assessment of M. Tech. Dissertations. ♫ Symbiosis International Pune [Deemed to be University] – Member of Research Advisory Committee. ♫ Symbiosis International Pune [Deemed to be University] – Member of Selection Committee Panel for teaching post recruitment. ♫ College of Engineering, Pune – Member of Research Advisory Committee.

27 | P a g e

CONTRIBUTION TO CONFERENCES

SR. CONFERENCE DATES ORGANIZERS DETAILS SESSION CHAIRMAN Vishwakarma Institute of Information National Conference on Mechanical Technology, Pune and Sponsored by Students 01 20 Feb 2015 Engineering, Material Science and Welfare Department, Savitribai Phule Pune Mechatronics (NCMMM-15) University, Pune. ADVISORY COMMITTEE MEMBER Sinhgad Academy of Engineering, Kondhawa, National Conference on Advanced 22 - 24 January 02 Pune and Sponsored by Savitribai Phule Pune Technology Innovations in 2015, University, Pune. Mechanical Engineering NATIONAL SCIENTIFIC COMMITTEE MEMBER 06 – 08 January College of Engineering and Management, 03 28th International Conference on 2016 Kolaghat, West Bengal. CADCAM, Robotics and Factories of the Future 2016. SESSION CHAIRMAN International Conference on 10 – 12 04 ISBM School of Technology, Pune. Innovative Trends in Mechanical March 2016 Engineering. SESSION CHAIRMAN Vishwakarma Institute of Information Mechanical Engineering, Material Technology, Pune and Sponsored by Students 05 19 March 2016 Science and Mechatronics (NCMMM- Welfare Department, Savitribai Phule Pune 16) University, Pune. SESSION CHAIRMAN Vishwakarma Institute of Information International Conference on Recent 17-18, February 06 Technology, Pune and Sponsored by, Savitribai Trends in Engineering and 2017 Phule Pune University, Pune. Technology MEMBER-TECHNICAL PROGRAMME COMMITTEE 15-16 December Symbiosis Institute of Technology, Symbiosis 07 2nd International Conference on Data 2017 International University Pune, India. Engineering and Communication Technology SESSION CHAIRMAN Vishwakarma Institute of Information International Conference on Recent 23-24 Feb 08 Technology, Pune and Sponsored by, Savitribai Trends in Engineering and 2018 Phule Pune University, Pune. Technology SESSION CHAIRMAN

4th National Conference on Advances 29-30 March 09 MIT College of Engineering, Pune. in Mechanical Engineering & 2018 Technology MEMBER-INTERNATIONAL PROGRAMME COMMITTEE Asian Society for Research in Engineering 09-11 July 10 1st ASRES International conference Sciences (ASRES) and SPJ Centre for Multi- 2018 on Modeling, Analysis and Disciplinary Research, Amsterdam, Netherlands Optimization (MAO – 2018) MEMBER - NATIONAL TECHNICAL Rajiv Gandhi Proudyogiki Vishwavidyalaya PROGRAM COMMITTEE 05-06 Oct Bhopal, Visvesvaraya National Institute of 11 International Conference on Social 2018 Technology (VNIT) Nagpur and Indian Institute of Networking and Computational Information Technology (IIIT) Nagpur Intelligence SESSION CHAIRMAN

5th National Conference on Advances 12 29 March 2019 MIT College of Engineering, Pune. in Mechanical Engineering & Technology

28 | P a g e

CONTRIBUTION TO CONFERENCES

SR. CONFERENCE DATES ORGANIZERS DETAILS MEMBER-INTERNATIONAL Asian Society for Research in Engineering PROGRAMME COMMITTEE 17-18 December 13 Sciences (ASRES) and SPJ Centre for Multi- 4th World Congress on Engineering 2019 Disciplinary Research. and Applications, Bali, Indonesia MEMBER-INTERNATIONAL PROGRAMME COMMITTEE

2nd ASRES International Conference 14 -16 Asian Society for Research in Engineering 14 on Modeling, Analysis and September, 2020 Sciences (ASRES) Optimization (MAO – 2020), Las Vegas, United States.

CONTRIBUTIONS TO JOURNALS

SR. JOURNAL RESPONSIBILITY

01 Materials and Manufacturing Reviewer

02 International Journal of Engineering and Technology, Research Reviewer

03 American Journal of Mechanical Engineering Reviewer

04 Asian Journal of Engineering and Technology Innovation Editorial Advisory Board Member

SUBJECTS TAUGHT to UG 1. Engineering Graphics I & II 2. CAD/CAM & Automation 3. Geometric Modeling 4. Product Design & Development 5. Product Life Cycle Management 6. Computer Aided Machine Drawing 7. Finite Element Analysis 8. Computer Graphics SUBJECTS TAUGHT to PG 1. Integrated Product Design & Development 2. Computer Aided Design 3. Product Life Cycle Management 4. Optimization Techniques

29 | P a g e

MEMBERSHIP OF PROFESSIONAL SOCIETIES

SR. NAME OF PROFESSIONAL SOCIETY MEMBERSHIP STATUS

01 Indian Society for Technical Education Life Member [LM 60564]

02 Indian Society of Ergonomics, Kolkata Life Member [LM 144]

03 International Association of Engineers Life Member [LM 63168] International Society for Structural and Multidisciplinary 04 Associate Member [AM 1320] Optimization

05 Sheet Metal Forming Research Association Life Member

06 Society of Automotive Engineers, India Member 7180510293

07 International Society on Multiple Criteria Decision Making Life Member

08 The Institution of Engineers (India), Kolkata Fellow F-126137-8

CONTRIBUTION AS EXPERT FACULTY FOR UG/PG/Ph.D. COURSES

SR. INSTITUTE SUBJECT S.V.E.R.I. College of Engineering, Pandharpur, 12/09/2009 & 01 CAD/CAM 21/03/2010

02 S.V.E.R.I. College of Engineering, Pandharpur, 20/09/2009 Mechatronics

03 S.V.E.R.I. College of Engineering, Pandharpur, 07/02/2010 Evolutionary Optimization

04 S.E.S. Saraswati College of Engineering, Khargar, 13/10/2011 Evolutionary Optimization

05 S.E.S. Saraswati College of Engineering, Khargar, 18/03/2012 Manufacturing System Simulation

06 TPCTs College of Engineering, Osmanabad, 18/02/2012 CAD/CAM

07 Alard College of Engineering & Management, Pune. Research Methodology

08 Department of Technology, University of Pune, SEM-II, 2013-14 Manufacturing System Design

09 Vishwakarma University, Pune Research Methodology

30 | P a g e

TRAINING PROGRAMS/WORKSHOPS/CONFERENCES/TECHNICAL EVENTS ORGANIZED

WORKED SR. TITLE PARTICIPANTS DATE AS Member of National Conference on Technology Faculty Members, Editorial 23rd & 24th 01 Management Beyond 2000 Sponsored Researchers, Students from and Printing November 2000 by AICTE, New Delhi India. Committee National Seminar on Modern Methods Member of Faculty Members, 10th & 11th 02 for Economic and Quality Production Management Researchers, Students from February 2001 held on Sponsored by AICTE, New Delhi. Committee India. National Seminar on Pollution: Impact Member of Faculty Members, 26th November 03 and Emerging Remedial Measures Management Researchers, Students from 2001 Sponsored by AICTE, New Delhi Committee India. One-week short-Term Training Program Member of Faculty Members, 04 on GUI Applications using VB & Oracle Organising Researchers, from --- Sponsored by MSBTE, Mumbai Committee Maharashtra.

Workshop on Recent Trends in UG Students, staff and 05 Coordinator 08.03.2008 CAD/CAM industry participants

Faculty Members from all Workshop on Implementation of 06 Coordinator affiliated colleges University 25.02.2010 syllabus of Geometric Modeling of Pune Faculty members from all Workshop on Implementation of 07 Coordinator affiliated colleges University 01.08.2011 syllabus of CAD/CAM & Automation of Pune

Faculty members, 08 to 09 August 08 FDP on Master CAM-Turning Module Coordinator University of Pune 2011

Faculty members, Workshop on Formulation of Syllabus of 09 Coordinator University of Pune and 26.11.2011 M.E. Mechanical CAD/CAM Industry Experts

National Conference PG-CONF- Organizing PG students from 25 & 26 March 10 MECHANICAL 2013 Secretary Maharashtra 2013

UG & PG students of 11 Innovative Product Concept Competition Coordinator 21.09.2013 Department

Workshop on MASTER CAM – Robot UG students in Association 12 Coordinator 21.12.2013 Master with Onward Technologies

Faculty members & FDP on MASTER CAM – Turning & 08 to 09 August 13 Convener students from all affiliated Milling 2014 colleges University of Pune

/ /

31 | P a g e

Workshop on MASTER CAM – PG students in Association with 14 Coordinator 08.02.2014 Turning & Milling Onward Technologies

PG students in Association with 22-23 Feb 15 Workshop on Simufact Forming Coordinator Kadkraft Systems, Chandigarh 2014

Present around The World 2014 Competition of The Institution of Technocrats & Students in the 16 Coordinator 09.03. 2014 Engineering and Technology [IET] age group of 18-26. England at Pune Local Network Level

Nirmaan – National Level Technical Faculty 14 & 15 March 17 UG and PG students Symposium Coordinator 2014

International Workshop on Advances in Engineering Faculty Members and PG 29 -31 January 18 Convener Optimization sponsored by S. P. Research Students 2015 Pune University, Pune. Workshop on Formulation of Faculty Members from all 19 syllabus of CAD/CAM & Convener affiliated colleges University of 20.03.2015 Automation, FEM and PDD Pune Workshop on Implementation of Faculty Members from all 20 syllabus of CAD/CAM & Convener affiliated colleges University of 21.07.2015 Automation, FEM and PDD Pune Two Weeks Faculty Development Programme on Instructional Faculty Members from all Dec 04-15 21 Methodologies for Outcome Based Coordinator AICTE approved Institutions 2017 Education in Mechanical Engineering sponsored by AICTE. One Week Faculty Development Program on Research Methodologies Advisory Faculty Members from all Dec 16-20, 22 and Advanced Optimization Committee AICTE approved Institutions 2019 Techniques sponsored by IET, Pune Member LN.

32 | P a g e

M.E./M.TECH. THESIS GUIDED

RESEARCH ACADEMIC EXTERNAL SR. TITLE OF THESIS SCHOLAR YEAR EXAMINER

Development of PLM System for Engineering Mr. Sudhir Dr. M. M. Akarte 01 Change Management in Manufacturing For Shivankar NITIE, Mumbai Supply Chain

Expert System Development for Deep Drawing Mr. Phule 02 2013 - 2014 Process Pushpak Dr. V. S. Puranik BEC, Bagalkot Product Development of Height Adjuster for TATA Mrs. Shalaka 03 Winger Joshi

Springback Optimization of Automotive Punch Mr. Omkar Dr. JVL Venkatesh 04 Plate: Cohort Intelligence Approach. Kukarni SGGSIE&T, Nanded

Bio Inspired Wrinkling Optimization of Automotive Mr. Ninad Dr. JVL Venkatesh 05 Connector - Flower Pollination Algorithm Kukarni SGGSIE&T, Nanded

Grey Wolf Approach for Thinning Optimization of Ms. Sujata Dr. JVL Venkatesh 06 Automotive Sealing Cover Patekar SGGSIE&T, Nanded

Cuckoo Search Applied to Springback Mrs. Patil Dr. Nandedkar Vilas 07 Optimization of Automotive Sealing Cover Archana SGGSIE&T, Nanded

Design, Development and Analysis of Schatz Mr. Kiran Dr. Thakur Dinesh 08 Mechanism with 3D Motion Mixer Bhoite DIAT, Pune Enhancement of Fatigue Life and Weight Mr. Kiran Dr. Jayesh Dange 09 Reduction of Steering Knuckle Arm with FEA. Bhokare LTCoE, Mumbai Fatigue Life Enhancement of Suspension Coil Mr. Chavan Dr. Jayesh Dange 10 Spring using FEA Chandrakant 2014 - 2015 LTCoE, Mumbai

Optimization of Laser Welding Process for Mr. Dhamale Prof. Andhare S. L. 11 Automotive Applications using Response Surface Madhav MIT Aurangabad Methodology.

Fracture optimization of Tail Cap using Fire Fly Ms. Trupti Dr. Tungikar V. B. 12 Algorithm Bhoskar SGGSIE&T, Nanded

Design and Optimization of Castellated Beam Mr. Shendage Dr. Nandedkar Vilas 13 using FEA. Dhanraj SGGSIE&T, Nanded

Design and Analysis of Atomic Force Microscope Ms. Shailaja Dr. Gulhane Nitin 14 Cantilever Probe. Mohite VJTI, Mumbai

Defect Detection of Bearing using Condition Mr. Mayur Dr. Gulhane Nitin 15 Monitoring and Analysis Thanage VJTI, Mumbai

Effect of Screw Profile on Stress Distribution Mr. Raibhole Dr. Thakur D. G. 16 Pattern of Dental Implants by FEA Govind DIAT, Pune

Optimization of Design of Helical Spring by using Mr. Abhishek Dr. Mohan Khond 17 2016-2017 Nature Inspired Swarm Based Algorithm Neve CoEP

Mr. Sudhir Design Optimization and Manufacturing of Mr. Sushant 18 2017-2018 Shivankar, Inteva Composite Leaf Spring Mhatugade Products, Pune

Experimental and Numerical Analysis on Forming Mr. Gyan Dr. Thakur D. G. 19 Limit Diagram for Micro Forming Process. Patel DIAT, Pune 2018-2019 Processing, Characterization and Mechanical Mr. Avinash Dr. Sonawane B.U. 20 Behavior of SiC and Al2O3 Reinforced Aluminium Bhat CoE, Pune 6061 Metal Matrix Composites

33 | P a g e

M. E./M. TECH. THESIS ADJUDICATED ACADEMIC SR. TITLE YEAR INSTITUTE

Effect of Fluid Assisted Blank Holding Pressure on Deep College of Engineering, 01 2012 - 2013 Drawing Parameters. Pune

02 Roll Pass Design Software using VB Applications An Investigation into the Influence of Blank Holder Force and 03 Sheet Metal Thickness on Springback in Bending 2012 - 2013 S.G.G.S.I.E.& T. Nanded

Analysis of Lubrication and Draw Bead in Sheet Metal 04 Forming Experimental Investigation of Deformation Mechanism of 05 Single Point Incremental Sheet Metal Forming Process.

06 Thermal and Structural Analysis of Water Pump Bearing. S.G.G.S.I.E.& T. Nanded 2013 -2014 Mechanical Design and Analysis of various components of 07 Undulator based Beam line front end of Indus-II Experimental Analysis of Adiabatic Air-Water Two Phase Flow MIT, Aurangabad, 08 2013 -2014 Pressure Drop In Small Diameter Bends Dr. B.A.M.U. Aurangabad Implementation of Lean Manufacturing using Value Stream College of Engineering, 09 2014 -2015 Mapping Pune Automated Assembly of Reduction Type Single Stage Gear 10 Box in Creo 2.0 Software. Automation of Design of Artistic Surface Patterns using CAD Rajarambapu Institute of 11 2014 -2015 Systems. Technology, Islampur Design and Development of Refrigeration Compressor for its 12 Transport Worthiness for Freezer on Wheel Application Comparative Study of Static and Fatigue Analysis of Pop up 13 M. S. Bidve College of (Blind) Riveted with Solid Riveted Lap Joint 2015 -2016 Engineering, Latur 14 Analysis and Optimization of Centrifugal Blower by using FEA Experimental Study and Analysis of Drawing Process of CRCA College of Engineering, 15 2015 -2016 M.S. Sheet Pune Custom Tool Development for Knowledge Based Design of 16 Vertical Turbine Pump House Layout using AutoCAD VBA

17 Design, Numerical Simulation and Analysis of Brake Drum Optimization of Electric Water Heater Thickness by using 18 Ansys and Experimentation. Planning and Implementation of Relocation of Products; A 19 Case Study for Second Generation Common Rail Injector Relocation from RBTR to NaP. 2015 -2016 S.G.G.S.I.E.& T. Nanded Quality and Performance Improvement of Selection Intent 20 Module in NX. Productivity Improvement by Implementing Lean 21 Manufacturing Tools and Techniques Effect of Material Properties and Geometries on Strain Non- 22 Uniformity Index and Constraint Factor of Deep Drawn Sheet Metal Components.

34 | P a g e

M. E./M. TECH. THESIS ADJUDICATED ACADEMIC SR. TITLE INSTITUTE YEAR Implementation of Virtual Internal Bond Model in 23 Nanomaterial by using Finite Element Approach Simulation Based Layout Design of Arrow Skid Production for Rajarambapu Institute of 24 Increasing Production Rate by Using Systematic Layout 2016 - 2017 Technology, Islampur Planning. Numerical Simulation of Blast Protection Conduit under 25 Nuclear Blast Loading Finite Volume Analysis of Process Parameters of Closed Die 26 Hot Forging Process Towards Improving Efficiency Effect of Heat Treatment on Burr Formation in Sheet Metal 27 Blanking of AA6082 by using Experimental Study and FEA.

Microstructure Study and Investigation of the Influence of 2016 - 2017 S.G.G.S.I.E.& T. Nanded 28 Various Process Parameters on Strain and Temperature Distribution Radial-Axial Ring Rolling Process using FEA Design of Fixed Tube Sheet Type Shell and Tube Heat 29 Exchanger using FEA. Experimental Investigations of Electro Chemical Micro College of Engineering, 30 2017 - 2018 Machining Process Parameters on Ti-6AL-4V Pune Experimental Analysis of friction Stir Welded Blank of Two 31 Dissimilar Materials College of Engineering, 2018 - 2019 An Experimental Investigations of Single Point Incremental Pune 32 Forming of Friction Stir Welded Blanks

33 2019 - 2020 Dr. B.A.M.U. Aurangabad

35 | P a g e

EXPERT LECTURES/KEY NOTE DELIVERED IN CONFERENCES/STTP/FDP SR. PROGRAM TITLE & DURATION TOPIC SPONSORED BY ORGANIZED BY

Evolutionary Emerging Trends in Manufacturing Optimization Indian Society of Saraswati College of 01 Engineering, 11-15 Jan 2010 Techniques in Technical Education Engineering, Mumbai Manufacturing Applications of Neural Networks, SRES College of Genetic SRES College of 02 Fuzzy Logic, & Genetic Algorithm in Engineering, Algorithm Engineering, Kopargaon Engineering, 08 April 2014 Kopargaon Advances in Design and Evolutionary Savitribai Phule Pune Amrutvahini College of 03 Manufacturing, 20 September 2014 Algorithms University, Pune Engineering, Sangamner

Enhancement in Robot Design, Maharashtra State Marathwada Mitra Genetic 04 Automation, Manufacturing and its Board of Technical Mandals Polytechnic, Algorithm Applications, 07 January 2016. Education, Mumbai Thergaon, Pune

Recent Computational Methods and Vishwakarma Institute of it's Applications for Analysis and Bioinspired Savitribai Phule Pune 05 Information Technology, Optimization in Mechanical Optimization University, Pune Pune Engineering, 26-27 Dec.2017.

33rd National Convention of Micro Forming The Institution of The Institution of 06 Aerospace Engineers 16th & 17th of Aerospace Engineers (India) Engineers (India), Pune November 2019. Materials

Bioinspired Algorithms in Grey Wolf Government College of 07 Engineering Optimization, 16th to TEQIP-III Algorithm Engineering, Karad. 20th Dec 2019.

Advances in Smart Manufacturing Micro Forming Veermata Jijabai

08 Technologies, 30th Dec 2019 to 04th of Aerospace TEQIP-III Technological Institute, Jan 2020. Materials Matunga, Mumbai.

Recent Developments in Advanced Bioinspired All India Council for P.D.A. College of 09 Composite Materials, Manufacturing Optimization of Technical Education, Engineering, Gulbarga and Sustainability Manufacturing New Delhi

Recent Developments in Advanced Micro Forming All India Council for P.D.A. College of 10 Composite Materials, Manufacturing of Aerospace Technical Education, Engineering, Gulbarga and Sustainability Materials New Delhi

INVITED LECTURES DELIVERED IN INDUSTRY

SR. ORGANIZATION TOPIC DATE

01 JCB India Limited Bioinspired Optimization Nov 15, 2019

36 | P a g e

B.E./B.TECH/ PROJECTS GUIDED Forming Analysis of Sheet Metal Formed 01 2007 - 2008 Mr. Ajit Chaudhari, Mr. Sunil Shinde Component

Medical Applications of Rapid Prototyping Mr. Saurabh Shaha, Mr. Vishal Acharekar, 02 2008 - 2009 [Tibia Bone] Mr. Mangesh Bokil, Mr. Vikrant Nibmalkar

03 Abrasive Jet Machining 2009 - 2010 Mr. Vikram Sreedharan, Mr. Mayur Shivpuje

Design and Fabrication of Button 04 2009 - 2010 Ms. Rashmi Jadhav, Ms. Priyanka Sawant. Operated Toggle Jack

05 2010 - 2011

Mr. Sudhir Nanaware, Mr. Kedar Ransing 06 Design and Fabrication of Chain Scissor Lift 2011 - 2012 Mr. Saddam Shaikh, Mr. Sumit Tapadiya Study and Experimentation on Tailor Welded Mr. Kanhere Rushikesh, Mr. Kikale Mihir 07 2012 - 2013 Blanks for Automotive Components Mr. Lakhani Dhawal, Mr. Walgude Tejas Process Planning and Computer Aided Mr. Tiwari Pankaj, Mr. Patil Nikhil 08 Programming and Simulation of Automotive 2013 - 2014 Mr. Takke Aditya, Mr. Raut Amey Wheel Cap Using Mastercam Software Optimization of Collecting Plates of Ms. Akshata Sangle, Mr. Harshal Shinde 09 2014 - 2015 Electrostatic Precipitator Through FEA Mr. Sumit Shendkar Mr. Jadhav Swapnil, Mr. Khedge Pradip 10 Automatic Seed Planter 2014 - 2015 Mr. Kothwal Jitendra, Mr. Kolekar Sumit Mr. Mohsin Khan, Mr. Mohamed Shastri 11 Design of Mast System For Airship 2016 - 2017 Mr. Akshay Kailat, Mr. Ritesh Jagatramka

12 Reduction of Fouling Noise from Gear Box 2016-2017 Mr. Nishant Karnavat

Mr. Kartikesh Govind Agrawal, Design and Fabrication of Self Balancing Mr. Shantanu Harishchandra Chavan 13 2017 - 2018 Two Wheeler by Gyroscopic Stabilization Ms. Tanvi Bharat Karguppikar Ms. Mrunal Rajendra Vaidya

14 Calibration and Designing of Drilling Jigs 2017 - 2018 Gaike Ajay Harishchandra

Design And Fabrication of Wall (Glass) Harshali Solat, Parth Malpure, 15 2018 - 2019 Cleaning Robot Tushar Saykar, Chaitanya Tambat

16 2019 - 2020

37 | P a g e

◄ INDUSTRIES VISITED ►

1. Texcom Textiles, Nanded 2. Nanded Textile Mills, Nanded

3. Sipta Coated Steels Pvt. Ltd. Nanded 4. Endurance Systems (I) Pvt. Ltd. A’ bad

5. Bharat Forge, Mundhwa, Pune 6. Piaggio Vehicles Pvt. Ltd. Baramati

7. Bharat Forge, Baramati 8. Ganage Pressings, Pimpari, Pune

9. Vishwadeep Enterprises, Pune 10. Aurangabad Auto Ancillary Pvt. Ltd.

11. 3D PLM Software Solutions Ltd. 12. Daimler, Sindelfingen, Germany

13. Feintool Technologie AG, Lyss, Switzerland 14. PARI Robotics, Pune

15. Force Motors, Pune 16. Alfa Laval, Pune.

17. Godrej Appliances, Shirwal 18. Lawkim Motors, Shirwal

19. JCB India 20.

 PERSONAL PROFILE

Date of Birth : 04/10/1978

Nationality : Indian

Marital Status : Married

PAN No. : AMVPK3986G

Passport No. : J6312517

Aadhar No. 9093 5772 0998

DATE: / /2019

Signature PLACE: Pune Dr. KAKANDIKAR GANESH M.

38 | P a g e

39 | P a g e

RESEARCH OUTREACH TO PRINT MEDIA

Daily Life 365, Pune

27/05/13

Daily Sakal Times, Pune

16/04/13

40 | P a g e

41 | P a g e

42 | P a g e

43 | P a g e

44 | P a g e

45 | P a g e