Indian Institute of Technology Bombay Powai, Mumbai 400076

Total Page：16

File Type：pdf, Size：1020Kb

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY POWAI, MUMBAI 400076. Advertisement No.: IRCC/EXT098/2019 Job Title Project Manager Job Reference Number 50089388 Application End Date 12.09.2019 Type of Employment Proj. Staff Contract No. of Position(s) 2 IITB Project Recruitment: Project title: Biomedical Engineering and Technology Centre (BETC) Incubation About the project: ""Biomedical Engineering and Technology Centre (BETC) Incubation" BETiC, IIT Bombay is a leading center of medical device innovation, with team members drawn from mechanical, medical, design, electronics, materials and software backgrounds, who are working closely with leading doctors to develop, test and commercialise a variety of innovative and affordable products. The center is funded by both state and central government (RGSTC, Mumbai and DST, Delhi). The work environment provides considerable scope for learning and networking. Essential Qualifications & Experience: B.Tech(in Mechanical/Electronics) + 4 years / M.Tech (in Mechanical/Electronics) + 2 years, in: novel medical device development, manufacturing, testing, commercialization and quality management (ISO 13485), preferably in med-tech innovation center or technology business incubator. Age less than 30 years. Applicant must submit copies of technical writing work/ papers/ reports by them, to [email protected]. Applicants should reside in close proximity to IIT campus (since accommodation may not be available). Job Profile: Medical device development, prototyping, pilot manufacturing, testing, quality management (ISO 13485), commercialization, project management, facility creation and management, technical services, mentoring and training, event organization and process streamlining. Pay Details: Level O2: Salary range from Rs.50000 to Rs 70000 (5000) + Rs.6000.00/- Out Of Campus Allowance (if applicable) p.m. General information: The position is temporary for a period of 1 year and tenable only for the duration of the project. The appointment is for time bound project and the candidate is required to work mainly for the successful completion of the project. The selection committee may offer lower or higher designation and lower or higher salary depending upon the experience and performance of the candidate in the interview. Candidates called for interview will be required to attend at their own expenses. For any queries/clarification please contact: [email protected] .

Copy Link

Recommended publications

Conference Agenda
Transforming Lives Biosciences to Bioeconomy 1-3 March 2021 Digital Platform AGENDA Transforming Lives Biosciences to Bioeconomy Transforming Lives Biosciences to Bioeconomy Transforming Lives Biosciences to Bioeconomy Session: Inauguration of the Global Bio India & Atmanirbhar Bharat Conclave For India and the World Day 1: Monday, 1st March 2021 Hall ATGC 3:45 pm – 6:15 pm (IST) The session will discuss how India's campaign ‘Make in India’ has translated into "Atmanirbhar Bharat Abhiyaan" to provide resilience and self-sufficiency" to the country. The session will highlight National Priorities, examples from India’s experience in turning Covid pandemic challenges into opportunities for developing domestic innovation ecosystem gaining self-sufficiency in requirements e.g., Vaccine, Drugs, Diagnostics, Personal protective equipment (PPE) kits, ventilators, thermal scanners, Masks etc. The transition from the National Biotechnology Development Strategy (NBDS) 2015-20 to NBDS 2021-25 comes when India is aiming to become a USD 5 trillion economy; making for India and the world, ensuring ease of living for the citizens, skilling its youth to become entrepreneurs and job-creators and ensuring equitable and sustainable development. Department of Biotechnology remains committed to providing a special impetus to new knowledge generation and discovery, launching major strategically driven and directed missions, empowering the country’s human resource scientifically and creating a strong ecosystem for research, development, translation and commercialization to create a robust bio-economy. The era of biotechnology-driven, socially relevant innovation and technology development becomes evident during COVID-19 outbreak. It will be the key driver of the NBDS 2021-25. We will get to know more as the Strategy document will be released during this session.
[Show full text]
Haffkine Institute for Training, Research & Testing
Haffkine Institute for Training, Research & Testing An Autonomous Institute of Govt. of Maharashtra Registered under Societies Register Act.1860 Recognized as “Scientific and Industrial Research Organization (SIRO) by Govt. Of India, Ministry of Science & Technology An ISO 9001:2008 Certified Organization MEDHA 2019– Bring your Idea to Life MEDHA is a weekend Hackathon for young working professionals and final year students from different disciplines to explore medical device innovation. Participants should have interest in healthcare domain and demonstrated creativity potential. Those with some new idea worth pursuing and commitment to take it forward will be preferred. The Hackathon is planned at Haffkine Institute for Training, Research & Testing, Parel, Mumbai on 13th – 14th July 2019. It is supported by BETiC IIT Bombay, KJ Somaiya College of Engineering & MGM Institute of Health Sciences. MEDHA pre-registration is now active on betic.org website, and available at: https://docs.google.com/forms/d/e/1FAIpQLSeFbJkoVv2QIFeZtFhqdxg_vMhSFvJxBuxAb F_PDE4ETcCxcA/viewform Here is the LinkedIn post about MEDHA, https://www.linkedin.com/pulse/medha-medical-device-hackathon-mumbai-pune- nagpur-july-bhallamudi/ Last date of pre-registration is 25/06/2019 Participants will be selected based on their biodata and portfolio of projects uploaded during pre-registration. Please see the attached brochure for details. Contact: +91 22 24160961 ; E-mail: [email protected] Mrs. Suvarna Pachpore Mr. Pavankumar Todkar Dr. Anuya Rege Ext.:
[Show full text]
R&D for COVID‐19 Mitigation, IIT‐B, 1 Aug 2020
R&D for COVID‐19 Mitigation, IIT‐B, 1 Aug 2020© Prof. B. Ravi, I.I.T. Bombay Biomedical Engineering & Technology Innovation Centre (BETIC) Supported by RG S&T Commission, Mumbai & DST, Ministry of S&T, New Delhi VISION: Idea Invention Innovation Impact Prof. B. Ravi Mechanical Engineering Department, IIT Bombay Medical Device Innovation – BETIC Facilities © Prof. B. Ravi, I.I.T. Bombay Conceptualization ISO Virtual Prototyping 13485 Plastics Prototyping Electronics Prototyping Medical Device Innovation – Process © Prof. B. Ravi, I.I.T. Bombay Team Building Clinical Immersion I. Define 400 Problems (Doctor) Problem Definition Concept & Feasibility Detailed Design Virtual Prototype II. Develop 200 Prototypes (Researcher) Rapid Prototype Functional Prototype Pilot Manufacturing Pre‐Clinical Testing III. Deliver 50 (Entrepreneur) Patents Human Clinical Trials Device Certification IPR Management Business Model IV. Deploy 20 (Investor) Products Production & Sales Scaling & Sustaining Medical Device Innovation – BETIC Products © Prof. B. Ravi, I.I.T. Bombay Glaucoma screener* Nasal surgery forceps (OKO Icare Solutions) (Om Surgical) Centric jaw recorder* Artificial temporal bone* (Prosthocentric) (Nu Ossa Mediquip) Endotracheal block detector* Mandible surgery guides* (Atmen Technovention) (Precisurge) Smart stethoscope* Laparoscopy instrument (Ayu Devices) (Eclipse Instrumentation) Surgery planner* Skin spray gun* (Algosurg Products) (Pacify Medical) Biopsy gun Hybrid splint* (Tenon Meditech) (Medi Asha Technologies) Diabetic foot screener*
[Show full text]
Indian Institute of Technology Bombay Powai, Mumbai 400076
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY POWAI, MUMBAI 400076. Advertisement No.: IRCC/EXT146/2020 Job Title Project Associate - I Job Reference Number 50193731 Application End Date 10.01.2021 Type of Employment Proj. Staff Contract No. of Position(s) 3 IITB Project Recruitment: Project title: Abdul Kalam Technology Innovation National Fellowship About the project: BETIC, IIT Bombay is a leading centre of medical device innovation, with team members drawn from mechanical, biomed, design, electronics, materials and software backgrounds, who are working closely with leading doctors to develop, test and commercialise a variety of innovative and affordable products. The centre is funded by several government agencies (RGSTC, DST, BIRAC and others). The work environment provides considerable scope for learning and networking. Essential Qualifications & Experience: Bachelors degree in Mechanical/ Electronics/ Biomedical with at least 1 year of work experience in medical device development Job Profile: Job Profile - Product Officer - As product officer, ensure end-to-end medical device development to meet the specified requirements - Define, conceptualize, design, test and deploy innovative medical devices in a collaborative environment - Interface between various stake-holders to ensure product safety and performance - Implement design and development activities as per quality management system like ISO 13485 - Disseminate knowledge and good practices through courses, evets, demos, visits, exhibitions Pay Details: Consolidated Rs. 31000 + HRA (if applicable) General information: The position is temporary for a period of 1 year and tenable only for the duration of the project. The appointment is for time bound project and the candidate is required to work mainly for the successful completion of the project.
[Show full text]
1 | Page CURRICULUM VITAE Dr. KAKANDIKAR GANESH MAROTRAO
CURRICULUM VITAE Dr. KAKANDIKAR GANESH MAROTRAO ORCID 0000-0003-3120-4009 Correspondence Address RESEARCHER ID G-3529-2017 Flat No. 1103, CHANDRANIL SCOPUS ID 55874256900 S. No. 144, Garmal GOOGLE SCHOLAR h-INDEX 08 Dhayari, Pune 411041 SCOPUS h-INDEX 05 Maharashtra, INDIA CITAT IONS 185 Ph.No.020-2439 1062, Mobile:919860641885, Website: www.mitwpu.edu.in, Email:[email protected] [email protected], ACADEMIC QUALIFICATIONS SR. EXAM YEAR INSTITUTE BOARD/ UNIVERSITY MARKS CLASS Indira Gandhi High M.S.B.S. & H.S.E. 01 S.S.C. 1993 82.71 Distinction School, Nanded Aurangabad Yashwant College, M.S.B.S. & H.S.E. 02 H.S.C. 1995 80.17 Distinction Nanded Aurangabad T.P.C.T.’s C.o.E. Dr. B. A. Marathwada 03 B.E. 1999 72.06 Distinction Osmanabad University, Aurangabad S.G.G.S.I.E.& T. S. R. T. Marathwada 04 M.E. 2005 68.81 First Nanded University, Nanded S.G.G.S.I.E.& T. S. R. T. Marathwada Awarded on 05 Ph.D. 2014 -- Nanded University, Nanded 13.06.2014 M.B.A. 06 2015 Y.C.M.O.U. Nashik Y.C.M.O.U. Nashik 55.65 Second Finance GRANTS RECEIVED Received Grants from Scientific & Engineering Research Board, Department of Science & 01. Technology, Government of India for Attending International Conference IDDRG 2013, at Zurich, Switzerland during 02-05 June 2013 under Young Scientist International Travel Support Scheme. Received Rupees One Lac for Research Project entitled “Optimization of Metal Forming Processes” from 02. University of Pune, Pune under Research Scheme.
[Show full text]
Biomedical Engineering & Technology Innovation Centre (Betic)
Biomedical Engineering & Technology Innovation Centre (BETiC) Biomedical Engineering & Technology Innovation Centre was established in 2014 at IITB Mumbai to bring doctors, researchers, entrepreneurs and investors together for medical device innovation. The initiative is supported by Rajiv Gandhi Science and Technology Commission, Mumbai. DST, New Delhi is also extending support. Two satellite centers were set up at COE Pune and VNIT Nagpur, followed by self‐supported BETIC cells in four engineering colleges (KJSCE Mumbai, MIT‐ADT Pune, SIU Pune, and GHRCE Nagpur) and seven in medical institutes (HITRT Mumbai, GMC & JJH Mumbai, MGMIHS Sanpada, BJMC Pune, DMIMS Wardha and BKLWRH Dervan), making it the largest such network in the country. About 75 doctors and industry experts are associated with the project. Features of the BETiC Program: A unique model of collaborative innovation involving doctors, researches, entrepreneurs and investors. In the last 5 years, BETiC team gathered over 400 unmet clinical needs from different hospitals. Developed proof‐of‐concepts of 200 different medical devices in close collaboration with expert doctors. Filed 55 patents. Wide range of products have been developed which include screening & diagnostic devices; surgical instruments; implants, prostheses and assistive devices. Incubated 16 start‐up companies so far. Technologies Developed: Sr. No Devices Transferred to 1 Orthopedic Surgery Planner Algosurg 2016 2 Smart Stethoscope Module Ayu Devices 2017 3 Hybrid Plaster Splint MediAsha Technologies
[Show full text]
Prof. B. Ravi the 9Th Lecture of the Innovation and Technology Enterprise Lecture Series
CSIR-NCL ORGANIZED BY SUPPORTED BY Prof. B. Ravi The 9th lecture of the Innovation and Technology Enterprise Lecture Series Medical Device Innovation: Opportunities, Challenges and Best Practices by Abstract: There is immense potential to solve unmet needs of society by exploring new technologies, developing appropriate solutions and offering them to end-users through start-up companies. This can lead to social impact through affordable solutions as well as job opportunities. Innovators can leverage emerging technology drivers like 3D printing, smart sensors, artificial Prof. B. Ravi intelligence and robotics. There are however, several ‘valleys Institute Chair Professor, Mechanical Engineering of death’ between ideation, invention, innovation and impaction. These can be overcome by team members having PI, Biomedical Engineering & Technology complementary backgrounds and using a systematic process Innovation Centre from concept to commercialization. A conducive eco-system to identify, train, mentor and support the aspiring innovators is Professor-in-Charge, Desai Sethi Centre for equally essential and helpful. We will illustrate the innovation process with real-life stories of Entrepreneurship multi-disciplinary teams who created novel and high-quality yet affordable medical devices, such as smart stethoscope (for Indian Institute of Technology Bombay, Mumbai contact-less auscultation of COVID patients). It involves unmet need identification by end-users (doctors in the case of healthcare), focused research by scientists, product On development by engineers and commercialization by entrepre- neurs. We will highlight key challenges and the best practices to effectively and efficiently translate research work into real- life application. We will also discuss the critical role of various resources (infrastructure, procedures, mentors, and culture) useful for aspiring innovators and entrepreneurs in their journey.
[Show full text]
Ircc/Ext094/2019
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY POWAI, MUMBAI 400076. Advertisement No.: IRCC/EXT094/2019 Job Title Assistant Project Manager Job Reference Number 50088303 Application End Date 10.09.2019 Type of Employment Proj. Staff Contract No. of Position(s) 1 IITB Project Recruitment: Project title: Biomedical Engineering and Technology Centre (BETC) Incubation About the project: About the project: BETiC, IIT Bombay is a leading center of medical device innovation, with team members drawn from mechanical, medical, design, electronics, materials and software backgrounds, who are working closely with leading doctors to develop, test and commercialise a variety of innovative and affordable products. The center is funded by both state and central government (RGSTC, Mumbai and DST, Delhi). The work environment provides considerable scope for learning and networking. Essential Qualifications & Experience: 1. B.Tech/M.Tech in Biomedical 2. Experience: B.Tech + 2 years / M.Tech, in: quality management system (ISO 13485) for novel medical device development, manufacturing, testing, commercialization, regulation, certification and, preferably in med-tech innovation center or technology business incubator. Age less than 30 years. Applicant must submit copies of technical writing work/ papers/ reports by them, to [email protected]. Applicants should reside in close proximity to IIT campus (since accommodation may not be available). Job Profile: Planning, implementation and monitoring of quality management system (ISO 13485) for novel medical device development, prototyping, pilot manufacturing, testing, commercialization, regulation, certification, project management, facility creation and management, technical services, mentoring and training, event organization and process streamlining. Pay Details: Level O3: Salary range from Rs.40000/- - Rs.56000/- (4000.00) + Rs.5000.00/- Out Of Campus Allowance (if applicable) p.m.
[Show full text]
Emedha 2021 18 Apr 2021 MEDICAL DEVICE HACKATHON
Deadline extended from 10 Apr 2021 to 18 Apr 2021 PRE-REGISTER by eMEDHA 2021 18 Apr 2021 MEDICAL DEVICE HACKATHON WATCH TEAM UP CREATE PRESENT Curated videos of Doctor + DesiGner + Brainstorm, Sketch, Win Fellowships clinical problems Mech + Electronics Fabricate prototype at BETIC Centres § Work from the comfort of your home or any Supported by BETIC preferred location IIT Bombay COE Pune § Work with professionals from multi-disciplinary VNIT Nagpur KJSCE Mumbai teams to form novel, patentable products MITADT Pune Symbiosis Pune § Form online teams and devise prototypes to BKLWH Devran improve human lives GGMC&JJH Mumbai DMIMS Wardha MGMIHS Mumbai § Win awards and an opportunity to form a startup GHRCE Nagpur at the end of the competition BJMC&SH Pune SDM Dharwad Medical Device Innovation - BrinG Your Idea to Life! e-mail: [email protected] for details. Deadline extended from 10 Apr 2021 to 18 Apr 2021 PRE-REGISTER by eMEDHA 2021 18 Apr 2021 MEDICAL DEVICE HACKATHON What is eMEDHA? eMEDHA is an online hackathon brinGinG toGether inter-disciplinary teams to explore medical device innovation. Who is orGaniZinG? BETIC – Biomedical EnGineerinG and TechnoloGy Innovation Centre network, comprisinG IIT Bombay, VNIT NaGpur and COE Pune, with partner institutes. When and where? 8–16 May 2021 (mainly two weekends) Virtual (online) using MS Teams software What will happen? Saturday, 8 May: Watch curated videos of clinical problems and form teams. Then brainstorm, sketch concepts, fabricate prototypes. BETIC mentors will provide prototyping materials, facilities and Guidance. 9 May – 15 May: Work with team members to fabricate device prototype based on Guidance from dedicated mentors.
[Show full text]
Biomedical Engineering and Technology Innovation Centre
RGSTC, Mumbai and DST, New Delhi Biomedical Engineering and Technology Innovation Centre BRIEF CUMULATIVE PROGRESS REPORT (Feb 2014 – Jan 2021) Prof. B. Ravi, PI Prof. A.M. Kuthe, Co‐PI Prof. B.B. Ahuja, Co‐PI Indian Institute Visvesvaraya National College of Engineering of Technology Institute of Technology Shivajinagar Bombay Nagpur Pune March 2021 Contents Executive Summary 3 1. Goal and Objectives 5 2. Project Team Members 7 3. Facilities and Processes 9 4. Products and Startups 11 5. Knowledge Dissemination 13 6. Impact and Sustainability 15 7. Appendixes 1: BETIC Centers & Faculty 17 2: Project Staff Members 19 3: Expert Clinical Mentors 21 4: Project Equipment 22 5: Products Developed 23 6: Patents Filed (India & PCT) 25 7: Books & Journal Papers 27 8: Conference Papers 29 9: Invited Talks 31 10: Hackathons and Camps 35 11: Product Exhibitions 36 12: News Media Coverage 37 13:. Innovation Awards 38 2 Executive Summary BETIC – Biomedical Engineering & Technology Innovation Centre was established at IIT Bombay in 2014, followed by satellite centers at VNIT Nagpur and COE Pune in 2015. These were funded by RGSTC, Govt. of Maharashtra, Mumbai, and DST, Govt. of India, New Delhi to catalyse indigenous medical device innovation. The faculty team comprises 14 investigators and associates at the three institutes. More than 110 researchers, project managers and students (PhD, Masters and B. Tech) worked in BETIC. Many of them incubated their startup companies, joined healthcare industry or pursued higher studies. About 50 clinicians and many industry professionals are closely associated as mentors, facilitators or resource persons. BETIC evolved a ‘define-develop-deliver-deploy’ model involving doctors, researchers, entrepreneurs and investors for effectively traversing the ‘valleys of death’ between idea, invention, innovation and impact.
[Show full text]