DOCSLIB.ORG

Lecture 13 – Nanophotonics in Plasmonics

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lecture 13 – Nanophotonics in Plasmonics Lecture 13 – Nanophotonics in plasmonics EECS 598-002 Winter 2006 Nanophotonics and Nano-scale Fabrication P.C.Ku Schedule for the rest of the semester Introduction to light-matter interaction (1/26): How to determine ε(r)? The relationship to basic excitations. Basic excitations and measurement of ε(r). (1/31) Structure dependence of ε(r) overview (2/2) Surface effects (2/7): Surface EM wave Surface polaritons Size dependence Case studies (2/9 – 2/16): Quantum wells, wires, and dots Nanophotonics in microscopy Nanophotonics in plasmonics Dispersion engineering (2/21 – 3/7): Material dispersion Waveguide dispersion (photonic crystals) EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 2 Outline Today, we will discuss the applications of surface plasmon polaritons in the following areas. Sensing Nanoscale light guiding Nanolithography LED efficiency enhancement EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 3 Surface plasmon for sensing Ref: Prasad, Biophotonics, figures 9.23 and 9.24. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 4 Bio sensing Ref: Prasad, Biophotonics, figure 9.25. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 5 Surface plasmon polariton (SPP) confinement dielectric ~100nm ~10nm metal Most of the energy is confined in the dielectric side. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 6 Plasmonic planar waveguide L W λ=633 nm Ref: J. R. Krenn and J. C. Weeber, Phil. Trans. R. Soc. Lond. A 362 (2004) 739. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 7 Interference Ref: J. R. Krenn and J. C. Weeber, Phil. Trans. R. Soc. Lond. A 362 (2004) 739. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 8 Plasmonic nanoparticle waveguide λ=1.55µm. Propagation length = 50µm. Ref: S. Maier et al., Appl. Phys. Lett., 86 (2005) 071103. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 9 Plasmonic V-groove waveguide Ref: S. Bozhevolnyi et al., Phys. Rev. Lett., 95 (2005) 046802. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 10 Another example of coupler Ref: W. Nomura et al., Appl. Phys. Lett., 86 (2005) 181108. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 11 Plasmonic printing Ref: P. G. Kik et al., Proc. Of SPIE, 4810 (2002) 7. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 12 Ref: P. G. Kik et al., Proc. Of SPIE, 4810 (2002) 7. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 13 Line/space pattern Mask pitch 300nm 2mm Interference of SPP generates extra fringes Ref: X. Luo and T. Ishihara, Appl. Phys. Lett., 84 (2004) 4780. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 14 g-line (436 nm) The authors attributed the LER to the mask roughness. Ref: X. Luo and T. Ishihara, Appl. Phys. Lett., 84 (2004) 4780. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 15 Superlens version I-line (365 nm) Ref:N. Fang et al., Science, 308 (2005) 534. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 16 Negative resist ~ 120 nm thick before printing Ref:N. Fang et al., Science, 308 (2005) 534. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 17 Spontaneous emission enhancement Corrugated metal can couple SP to radiation. Ref: K. Okamoto et al., Appl. Phys. Lett., 87 (2005) 071102. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 18 Top-emitting organic LEDs Active layer Alq3 is pumped by a diode laser @ 410 nm from the bottom silica sub. Ref: S. Wedge et al., Appl. Phys. Lett., 85 (2004) 182. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 19 MDPC = metallic-dielectric photonic crystal L/S= 150/150 nm Active layer MEH-PPV is electrically pumped. Ref: C. Liu et al., Appl. Phys. Lett., 86 (2005) 143501. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 20 Radiative lifetime shortening in fluorescence process Reduce the risk of photochemical destruction when molecules are in excited states for long time. Enhance quantum yield w/o Ag: τ=280 µs τ=2 µs Ref: D. A. Weitz et al., Opt. Lett., 7 (1982) 89. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 21 Directional fluorescence Ref: J. R. Lakowicz et al., J. Phys. D, 36 (2003) R240. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 22 Recommended Readings Plasmonic biosensing P. N. Prasad, Biophotonics Plasmonic waveguide E. Ozbay, Science, 311 (2006) 189. Plasmonic printing P. G. Kik et al., Proc. Of SPIE, 4810 (2002) 7. EECS 598-002 Nanophotonics and Nanoscale Fabrication by P.C.Ku 23.
Load more

Recommended publications
  • Quantum Optics with Giant Atoms – the First Five Years
    Quantum optics with giant atoms – the first five years Anton Frisk Kockum Abstract In quantum optics, it is common to assume that atoms can be approximated as point-like compared to the wavelength of the light they interact with. However, recent advances in experiments with artificial atoms built from superconducting circuits have shown that this assumption can be violated. Instead, these artificial atoms can couple to an electromagnetic field at multiple points, which are spaced wavelength distances apart. In this chapter, we present a survey of such systems, which we call giant atoms. The main novelty of giant atoms is that the multiple coupling points give rise to interference effects that are not present in quantum optics with ordinary, small atoms. We discuss both theoretical and experimental results for single and multiple giant atoms, and show how the interference effects can be used for interesting applications. We also give an outlook for this emerging field of quantum optics. Key words: Quantum optics, Giant atoms, Waveguide QED, Relaxation rate, Lamb shift, Superconducting qubits, Surface acoustic waves, Cold atoms 1 Introduction Natural atoms are so small (radius r ≈ 10−10 m) that they can be considered point- like when they interact with light at optical frequencies (wavelength λ ≈ 10−6 − 10−7 m)[1]. If the atoms are excited to high Rydberg states, they can reach larger sizes (r ≈ 10−8 − 10−7 m), but quantum-optics experiments with such atoms have them interact with microwave radiation, which has much longer wavelength (λ ≈ arXiv:1912.13012v1 [quant-ph] 30 Dec 2019 10−2 −10−1 m)[2].
    [Show full text]
  • Merging Photonics and Artificial Intelligence at the Nanoscale
    Intelligent Nanophotonics: Merging Photonics and Artificial Intelligence at the Nanoscale Kan Yao1,2, Rohit Unni2 and Yuebing Zheng1,2,* 1Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712, USA 2Texas Materials Institute, The University of Texas at Austin, Austin, Texas 78712, USA *Corresponding author: [email protected] Abstract: Nanophotonics has been an active research field over the past two decades, triggered by the rising interests in exploring new physics and technologies with light at the nanoscale. As the demands of performance and integration level keep increasing, the design and optimization of nanophotonic devices become computationally expensive and time-inefficient. Advanced computational methods and artificial intelligence, especially its subfield of machine learning, have led to revolutionary development in many applications, such as web searches, computer vision, and speech/image recognition. The complex models and algorithms help to exploit the enormous parameter space in a highly efficient way. In this review, we summarize the recent advances on the emerging field where nanophotonics and machine learning blend. We provide an overview of different computational methods, with the focus on deep learning, for the nanophotonic inverse design. The implementation of deep neural networks with photonic platforms is also discussed. This review aims at sketching an illustration of the nanophotonic design with machine learning and giving a perspective on the future tasks. Keywords: deep learning; (nano)photonic neural networks; inverse design; optimization. 1. Introduction Nanophotonics studies light and its interactions with matters at the nanoscale [1]. Over the past decades, it has received rapidly growing interest and become an active research field that involves both fundamental studies and numerous applications [2,3].
    [Show full text]
  • Up-And-Coming Physical Concepts of Wireless Power Transfer
    Up-And-Coming Physical Concepts of Wireless Power Transfer Mingzhao Song1,2 *, Prasad Jayathurathnage3, Esmaeel Zanganeh1, Mariia Krasikova1, Pavel Smirnov1, Pavel Belov1, Polina Kapitanova1, Constantin Simovski1,3, Sergei Tretyakov3, and Alex Krasnok4 * 1School of Physics and Engineering, ITMO University, 197101, Saint Petersburg, Russia 2College of Information and Communication Engineering, Harbin Engineering University, 150001 Harbin, China 3Department of Electronics and Nanoengineering, Aalto University, P.O. Box 15500, FI-00076 Aalto, Finland 4Photonics Initiative, Advanced Science Research Center, City University of New York, NY 10031, USA *e-mail: [email protected], [email protected] Abstract The rapid development of chargeable devices has caused a great deal of interest in efficient and stable wireless power transfer (WPT) solutions. Most conventional WPT technologies exploit outdated electromagnetic field control methods proposed in the 20th century, wherein some essential parameters are sacrificed in favour of the other ones (efficiency vs. stability), making available WPT systems far from the optimal ones. Over the last few years, the development of novel approaches to electromagnetic field manipulation has enabled many up-and-coming technologies holding great promises for advanced WPT. Examples include coherent perfect absorption, exceptional points in non-Hermitian systems, non-radiating states and anapoles, advanced artificial materials and metastructures. This work overviews the recent achievements in novel physical effects and materials for advanced WPT. We provide a consistent analysis of existing technologies, their pros and cons, and attempt to envision possible perspectives. 1 Wireless power transfer (WPT), i.e., the transmission of electromagnetic energy without physical connectors such as wires or waveguides, is a rapidly developing technology increasingly being introduced into modern life, motivated by the exponential growth in demand for fast and efficient wireless charging of battery-powered devices.
    [Show full text]
  • Graphene Plasmonics: Physics and Potential Applications
    Graphene plasmonics: Physics and potential applications Shenyang Huang1,2, Chaoyu Song1,2, Guowei Zhang1,2, and Hugen Yan1,2* 1Department of Physics, State Key Laboratory of Surface Physics and Key Laboratory of Micro and Nano Photonic Structures (Ministry of Education), Fudan University, Shanghai 200433, China 2Collaborative Innovation Center of Advanced Microstructures, Nanjing 210093, China *Email: [email protected] Abstract Plasmon in graphene possesses many unique properties. It originates from the collective motion of massless Dirac fermions and the carrier density dependence is distinctively different from conventional plasmons. In addition, graphene plasmon is highly tunable and shows strong energy confinement capability. Most intriguing, as an atom-thin layer, graphene and its plasmon are very sensitive to the immediate environment. Graphene plasmons strongly couple to polar phonons of the substrate, molecular vibrations of the adsorbates, and lattice vibrations of other atomically thin layers. In this review paper, we'll present the most important advances in grapene plasmonics field. The topics include terahertz plasmons, mid-infrared plasmons, plasmon-phonon interactions and potential applications. Graphene plasmonics opens an avenue for reconfigurable metamaterials and metasurfaces. It's an exciting and promising new subject in the nanophotonics and plasmonics research field. 1 Introduction Graphene is a fascinating electronic and optical material and the study for graphene started with its magneto-transport measurements and an anomalous Berry phase[1, 2]. Optical properties of graphene attracted more and more attention later on. Many exciting developments have been achieved, such as universal optical conductivity[3], tunable optical absorption[4, 5] and strong terahertz response[6]. Most importantly, as an interdisciplinary topic, plasmon in graphene has been the major focus of graphene photonics in recent years.
    [Show full text]
  • DNA Nanotechnology Meets Nanophotonics
    DNA nanotechnology meets nanophotonics Na Liu 2nd Physics Institute, University of Stuttgart, Pfaffenwaldring 57, 70569 Stuttgart, Germany Max Planck Institute for Solid State Research, Heisenbergstrasse 1, 70569 Stuttgart, Germany Email: [email protected] Key words: DNA nanotechnology, nanophotonics, DNA origami, light matter interactions Call-out sentence: It will be very constructive, if more research funds become available to support young researchers with bold ideas and meanwhile allow for failures and contingent outcomes. The first time I heard the two terms ‘DNA nanotechnology’ and ‘nanophotonics’ mentioned together was from Paul Alivisatos, who delivered the Max Planck Lecture in Stuttgart, Germany, on a hot summer day in 2008. In his lecture, Paul showed how a plasmon ruler containing two metallic nanoparticles linked by a DNA strand could be used to monitor nanoscale distance changes and even the kinetics of single DNA hybridization events in real time, readily correlating nanoscale motion with optical feedback.1 Until this day, I still vividly remember my astonishment by the power and beauty of these two nanosciences, when rigorously combined together. In the past decades, DNA has been intensely studied and exploited in different research areas of nanoscience and nanotechnology. At first glance, DNA-based nanophotonics seems to deviate quite far from the original goal of Nadrian Seeman, the founder of DNA nanotechnology, who hoped to organize biological entities using DNA in high-resolution crystals. As a matter of fact, DNA-based nanophotonics does closely follow his central spirit. That is, apart from being a genetic material for inheritance, DNA is also an ideal material for building molecular devices.
    [Show full text]
  • Inverse Design for Silicon Photonics: from Iterative Optimization Algorithms to Deep Neural Networks
    applied sciences Review Inverse Design for Silicon Photonics: From Iterative Optimization Algorithms to Deep Neural Networks Simei Mao 1,2, Lirong Cheng 1,2 , Caiyue Zhao 1,2, Faisal Nadeem Khan 2, Qian Li 3 and H. Y. Fu 1,2,* 1 Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen 518055, China; [email protected] (S.M.); [email protected] (L.C.); [email protected] (C.Z.) 2 Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China; [email protected] 3 School of Electronic and Computer Engineering, Peking University, Shenzhen 518055, China; [email protected] * Correspondence: [email protected]; Tel.: +86-755-3688-1498 Abstract: Silicon photonics is a low-cost and versatile platform for various applications. For design of silicon photonic devices, the light-material interaction within its complex subwavelength geometry is difficult to investigate analytically and therefore numerical simulations are majorly adopted. To make the design process more time-efficient and to improve the device performance to its physical limits, various methods have been proposed over the past few years to manipulate the geometries of silicon platform for specific applications. In this review paper, we summarize the design methodologies for silicon photonics including iterative optimization algorithms and deep neural networks. In case of iterative optimization methods, we discuss them in different scenarios in the sequence of increased degrees of freedom: empirical structure, QR-code like structure and irregular structure. We also review inverse design approaches assisted by deep neural networks, which generate multiple devices Citation: Mao, S.; Cheng, L.; Zhao, with similar structure much faster than iterative optimization methods and are thus suitable in C.; Khan, F.N.; Li, Q.; Fu, H.Y.
    [Show full text]
  • Wirelessly-Powered Cage Designs for Supporting Long-Term Experiments on Small Freely Behaving Animals in a Large Experimental Arena
    electronics Review Wirelessly-Powered Cage Designs for Supporting Long-Term Experiments on Small Freely Behaving Animals in a Large Experimental Arena Byunghun Lee 1 and Yaoyao Jia 2,* 1 Department of Electrical Engineering, Incheon National University, Incheon 22012, Korea; [email protected] 2 Department of Electrical and Computer Engineering, North Carolina State University, 890 Oval Dr, Raleigh, NC 27606, USA * Correspondence: [email protected]; Tel.: +1-919-515-7350 Received: 22 October 2020; Accepted: 18 November 2020; Published: 25 November 2020 Abstract: In modern implantable medical devices (IMDs), wireless power transmission (WPT) between inside and outside of the animal body is essential to power the IMD. Unlike conventional WPT, which transmits the wireless power only between fixed Tx and Rx coils, the wirelessly-powered cage system can wirelessly power the IMD implanted in a small animal subject while the animal freely moves inside the cage during the experiment. A few wirelessly-powered cage systems have been developed to either directly power the IMD or recharge batteries during the experiment. Since these systems adapted different power carrier frequencies, coil configurations, subject tracking techniques, and wireless powered area, it is important for designers to select suitable wirelessly-powered cage designs, considering the practical limitations in wirelessly powering the IMD, such as power transfer efficiency (PTE), power delivered to load (PDL), closed-loop power control (CLPC), scalability, spatial/angular misalignment, near-field data telemetry, and safety issues against various perturbations during the longitudinal animal experiment. In this article, we review the trend of state-of-the-art wirelessly-powered cage designs and practical considerations of relevant technologies for various IMD applications.
    [Show full text]
  • NANOPHOTONICS a FORWARD LOOK NANOPHOTONICS Association a FORWARD LOOK
    association NANOPHOTONICS A FORWARD LOOK NANOPHOTONICS association A FORWARD LOOK Report Editors Gonçal Badenes, ICFO Stewe Bekk, ICFO Martin Goodwin, 2020 Insights DESIGN Sergio Simón Petreñas D.L. B-29170-2012 (Printed version) B-29171-2012 (Electronic version) © 2012 NEA. The text of this publication may be reproduced provided the source is acknowledged. Reproduction for commercial use without prior permission is prohibited. PICTURES © reserved by original copyright holder. Reproduction of the artistic material contained therein is prohibited The Nanophotonics Europe Association is partially funded by the Spanish Ministry of Economy and Competitiveness through grant ACI-2009-1013 NANOPHOTONICS association A FORWARD LOOK About this Report This document is the report of the Nanophotonics Europe Association workshop held at King's College, London (UK) in July 2012. The purpose was to define a strategy for advancing research and development of nanophotonics. The views, ideas, conclusions and recommendations presented in this report are those of the workshop participants. Nanophotonics Europe Association The Nanophotonics Europe Association (NEA) is a not-for-profit organisation created to promote and advance European science and technology in the emerging area of nanophotonics. The goals of the association are fourfold: 1. To promote research in nanophotonics by coordinating the efforts of the various players involved, and, in particular, by encouraging collaboration between academic institution and industry. 2. To create a common interest group that represents member’s interests with national and transnational scientific government funding agencies, technology platforms, professional associations and the general public. 3. To integrate the resources and strategies of its members. 4. To facilitate the exchange of information, ideas and data.
    [Show full text]
  • Advanced Trends of Nanophotonics
    Part VII Advanced Trends of Nanophotonics Wei Ting Chen and Din Ping Tsai Introduction Nanophotonics is the study of the behavior of light-matter interaction at the nanometer scale. By adding the dimensions of optical devices and components to sub-wavelength scale, nanophotonics provides new opportunities for fundamen- tal science and practical applications. One of the goals of nanophotonics devel- opment is to manipulate light at the nanoscale, which may not be limited by the chemical composition of natural materials and the diffraction limit of electromag- netic wave. Nanophotonics has several advantages with such diffraction-unlimited properties for functional applications: (i) nanoscale footprints-smaller compo- nents and devices; (ii) photon-electron process in nanoscale—faster processing speed, and (iii) nanoscale confinement of optical radiation and electromagnetic fields—enhancing the light-matter interactions and dramatically reducing the optical energy consumption. The characterization of drastic optical localization within such components strongly enhances the typically weak interaction between light and matter, which increases the energy efficiency to obtain desired effects and phenomena. This chapter covers two major parts of the latest trends of nano- photonics, plasmonics, and metamaterials. Several cutting-edge approaches har- vested from the extraordinary properties of nanophotonics, which are conducted to advanced trends relate to: Micro/nano-lasers with the smallest plasmonic nano- laser, theoretical models of the micro/nano-cavity, and semiconductor micro-lasers with tuning functions on a flexible substrate (Chap. 16, 17 and 19), nanostructures light-emitting diode (LED) with better light extraction and reduced piezoelectric field induced by strain (Chap.18 , 24), one-dimensional photonic crystal nanowires with small footprints and ultrahigh Q-factors (Chap.
    [Show full text]
  • 7 Plasmonics
    7 Plasmonics Highlights of this chapter: In this chapter we introduce the concept of surface plasmon polaritons (SPP). We discuss various types of SPP and explain excitation methods. Finally, di®erent recent research topics and applications related to SPP are introduced. 7.1 Introduction Long before scientists have started to investigate the optical properties of metal nanostructures, they have been used by artists to generate brilliant colors in glass artefacts and artwork, where the inclusion of gold nanoparticles of di®erent size into the glass creates a multitude of colors. Famous examples are the Lycurgus cup (Roman empire, 4th century AD), which has a green color when observing in reflecting light, while it shines in red in transmitting light conditions, and church window glasses. Figure 172: Left: Lycurgus cup, right: color windows made by Marc Chagall, St. Stephans Church in Mainz Today, the electromagnetic properties of metal{dielectric interfaces undergo a steadily increasing interest in science, dating back in the works of Gustav Mie (1908) and Rufus Ritchie (1957) on small metal particles and flat surfaces. This is further moti- vated by the development of improved nano-fabrication techniques, such as electron beam lithographie or ion beam milling, and by modern characterization techniques, such as near ¯eld microscopy. Todays applications of surface plasmonics include the utilization of metal nanostructures used as nano-antennas for optical probes in biology and chemistry, the implementation of sub-wavelength waveguides, or the development of e±cient solar cells. 208 7.2 Electro-magnetics in metals and on metal surfaces 7.2.1 Basics The interaction of metals with electro-magnetic ¯elds can be completely described within the frame of classical Maxwell equations: r ¢ D = ½ (316) r ¢ B = 0 (317) r £ E = ¡@B=@t (318) r £ H = J + @D=@t; (319) which connects the macroscopic ¯elds (dielectric displacement D, electric ¯eld E, magnetic ¯eld H and magnetic induction B) with an external charge density ½ and current density J.
    [Show full text]
  • Towards Deep Integration of Electronics and Photonics
    applied sciences Review Towards Deep Integration of Electronics and Photonics Ivan A. Pshenichnyuk 1,* , Sergey S. Kosolobov 1 and Vladimir P. Drachev 1,2,* 1 Skolkovo Institute of Science and Technology, Center for Photonics and Quantum Materials, Nobelya 3, 121205 Moscow, Russia; [email protected] 2 Department of Physics, University of North Texas,1155 Union Circle, Denton, TX 76203, USA * Correspondence: [email protected] (I.A.P.); [email protected] (V.P.D.) Received: 15 September 2019; Accepted: 5 November 2019; Published: 12 November 2019 Abstract: A combination of computational power provided by modern MOSFET-based devices with light assisted wideband communication at the nanoscale can bring electronic technologies to the next level. Obvious obstacles include a size mismatch between electronic and photonic components as well as a weak light–matter interaction typical for existing devices. Polariton modes can be used to overcome these difficulties at the fundamental level. Here, we review applications of such modes, related to the design and fabrication of electro–optical circuits. The emphasis is made on surface plasmon-polaritons which have already demonstrated their value in many fields of technology. Other possible quasiparticles as well as their hybridization with plasmons are discussed. A quasiparticle-based paradigm in electronics, developed at the microscopic level, can be used in future molecular electronics and quantum computing. Keywords: plasmon; light-matter interaction; photonics; nano-electronics; quasiparticle 1. Introduction Further achievements in electronics and photonics imply their better integration. Usage of photons at the level of circuits and single chips has a huge potential to improve modern intelligent systems [1].
    [Show full text]
  • Recent Trends in Micro- and Nanophotonics: a Personal Selection
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Vol. 13, No. 9, September 2011, p. 1055 - 1066 Recent trends in micro- and nanophotonics: A personal selection D. MIHALACHE Horia Hulubei National Institute for Physics and Nuclear Engineering, P. O. B. MG-6, 077125 Magurele, Romania I give a brief overview of some recent results in micro- and nanophotonics. Due to the vast amount of research activity in these exploding areas I only concentrate on selected recent advances in (a) silicon photonics, (b) spatial and spatiotemporal optical solitons (alias light bullets) in microwaveguide arrays and in arrays of evanescently-coupled silicon- on-insulator nanowires, (c) spatial solitons in photorefractive materials, (d) nanoplasmonics, (e) photonic crystals, (f) metamaterials for micro- and nanophotonics including optical materials with negative refractive indices, (g) terahertz radiation and its applications, and (h) solid-state single photon sources and nanometric size optical cavities for quantum information processing. (Received August 12, 2011; accepted September 15, 2011) Keywords: Microphotonics, Nanophotonics, Silicon photonics, Plasmonics, Photonic crystals, Spatial optical solitons, Light bullets, Plasmonic lattice solitons, Metamaterials, Terahertz radiation 1. Introduction for biosensing and chemical sensing applications, ability of metal nanoparticles to act as efficient pointlike sources The term “photonics” was coined in 1967 by Pierre of both light and heat, and subwavelength plasmonic Aigrain, a French scientist, who gave the following lattice solitons in arrays of metallic nanowires embedded definition: “Photonics is the science of the harnessing of in nonlinear Kerr media will be briefly discussed. light. Photonics encompasses the generation of light, the Section 4 is devoted to recent advances in the study of detection of light, the management of light through photonic crystals and metamaterial structures (including guidance, manipulation, and amplification, and most engineered media with negative refractive indices).
    [Show full text]