DOCSLIB.ORG

TRADE/RESALE PRICE SHEET JANUARY 1, 2010 Accu-Tech DIR Discount: 13.75% UPC Catalog Description Qty

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
TRADE/RESALE PRICE SHEET JANUARY 1, 2010 Accu-Tech DIR Discount: 13.75% UPC Catalog Description Qty TRADE/RESALE PRICE SHEET JANUARY 1, 2010 Accu-Tech DIR Discount: 13.75% UPC Catalog Description Qty. MSRP Price Item # Number UM PRICE UM 730573- Series SSS Intumescent Sealant 01100 SSS100 Intumescent Sealant 10.1 oz. Tube 18.2 Cu. In. (300 ml) PC $12.76 PC 01102 SSS102 Intumescent Sealant 2 gal. Pail 462 Cu. In. (7.6 Liters) PC $276.43 PC 01105 SSS105 Intumescent Sealant 5 gal. Pail 1,155 Cu. In. (19.0 Liters) PC $465.04 PC 01103 SSS120 Intumescent Sealant 20 oz. Sausage 36 Cu. In. (592 ml) PC $24.38 PC 01129 SSS129 Intumescent Sealant 29 oz. Tube 52 Cu. In. (858 ml) PC $32.83 PC Series LCI Intumescent Sealant 01170 LCI300 Intumescent Sealant 10.1 oz. Tube 18.2 Cu. In. (300 ml) PC $9.37 PC 01175 LCI305 Intumescent Sealant 5 gal Pail 1,155 Cu. In. (19.0 Liters) PC $312.68 PC 01172 LCI320 Intumescent Sealant 20 oz. Sausage 36 Cu. In. (592 ml) PC $16.51 PC 01179 LCI329 Intumescent Sealant 29 oz. Tube 52 Cu. In. (858 ml) PC $22.49 PC Series LC Endothermic Sealant 01130 LC150 Endothermic Sealant 10.1 oz. Tube 18.2 Cu. In. (300 ml) PC $9.08 PC 01135 LC155 Endothermic Sealant 5 Gal Pail 1,155 Cu. In. (19.0 Liters) PC $303.31 PC 01133 LC120 Endothermic Sealant 20 oz. Sausage 36 Cu. In. (592 ml) PC $16.02 PC 01131 LC129 Endothermic Sealant 29 oz. Tube 52 Cu. In. (858 ml) PC $22.09 PC Series ES Elastomeric Sealant 08100 ES100 Elastomeric Sealant - Light Blue -10.1 oz. Tube 18.2 Cu. In. (300 ml) PC $10.96 PC 08101 ES100R Elastomeric Sealant - Red -10.1 oz. Tube 18.2 Cu. In. (300 ml) PC $10.96 PC 08105 ES105 Elastomeric Sealant - Light Blue - 5 gal. Pail 1,155 Cu. In. (19.0 Liters) PC $294.59 PC 08106 ES105R Elastomeric Sealant - Red - 5 gal. Pail 1,155 Cu. In. (19.0 Liters) PC $294.59 PC 08103 ES120 Elastomeric Sealant - Light Blue - 20 oz. Sausage 36 Cu. In. (592 ml) PC $20.24 PC 08104 ES120R Elastomeric Sealant - Red - 20 oz. Sausage 36 Cu. In. (592 ml) PC $20.24 PC 08129 ES129 Elastomeric Sealant - Light Blue - 29 oz. Tube 52 Cu. In. (858 ml) PC $24.95 PC 08131 ES129R Elastomeric Sealant - Red - 29 oz. Tube 52 Cu. In. (858 ml) PC $24.95 PC Series PEN300 Silicone Joint Sealant 01120 PEN300 Silicone 10.3 oz. Tube 18.5 Cu. In. (304ml) PC $18.07 PC 01123 PEN320 Silicone 20 oz. Sausage 36 Cu. In. (592 ml) PC $30.75 PC 01125 PEN305 Silicone 5 Gal. Pail 1,155 Cu. In. (19.0 Liters) PC $553.80 PC 01126 PEN305SL Self-Leveling Silicone 5 Gal. Pail 1,155 Cu. In. (19.0 L) PC $595.13 PC Two-Part Silicone Foam 01140 PEN200 Silicone Foam 100# Kit (50# Part A, 50# Part B) PC $1,786.14 PC SIL300 Premium Grade Silicone Joint Sealant 01310 SIL300 Silicone 10.1 oz. Tube 18.2 Cu. In. (300 ml) PC $18.07 PC 01320 SIL320 Silicone 20 oz. Sausage 36 Cu. In. (592 ml) PC $30.75 PC 01305 SIL305 Silicone 4.5 Gal. Pail 1,037 Cu. In. (17.0 Liters) PC $553.80 PC SIL300SL Premium Grade Self-Leveling Silicone Joint Sealant 01322 SIL320SL Self-Leveling Silicone 20 oz. Sausage 36 Cu. In. (592 ml) PC $34.47 PC 01326 SIL305SL Self-Leveling Silicone 5 Gal. Pail 1,037 Cu. In. (17.0 L) PC $595.13 PC Smoke 'n' Sound™ Sealant 01154 SNS105 Smoke & Acoustical Sealant - 5 Gal. Pail 1,155 Cu. In. (19.0 L) PC $303.25 PC Smoke & Acoustical Sealant White - 5 Gal. Pail 11154 SNS105W 1,155 Cu. In. (19.0 L) PC $303.25 PC Smoke & Acoustical Sealant White - 20 oz. Sausage 11151 SNS120W 36 Cu. In. (592 ml) PC $6.42 PC Series EP PowerShield Box Inserts 02500 EP44 Electrical Box Insert 3 3/4" x 3 3/4" x 1/8" pad PC $4.54 PC 02505 EP45 Electrical Box Insert 4 1/4" x 4 1/4" x 1/8" pad PC $5.94 PC Series SSP Intumescent Putty 02100 SSP100 Putty 36 Cu. In. Tube (.6 Liter) PC $26.72 PC 02101 SSP28 Putty 24 Cu. In. Tube PC $18.31 PC 02200 SSP4S Putty Pad 7.25" x 7.25" x 3/16" PC $4.11 PC 02300 SSP9S Putty Pad 9.00" x 9.00" x 3/16" PC $7.69 PC Series SSB Firestop Pillows 06140 SSB14 Firestop Pillow 1"x4"x9" PC $9.29 PC 06240 SSB24 Firestop Pillow 2"x4"x9" PC $11.14 PC 06260 SSB26 Firestop Pillow 2"x6"x9" PC $13.01 PC 06360 SSB36 Firestop Pillow 3"x6"x9" PC $15.79 PC Series SSC Intumescent Collars 03600 SSC600 For 6.0" Dia. Plastic Pipe PC $78.11 PC Series LCC Intumescent Firestop Collars 03901 LCC150 For 1.5" Dia. Plastic Pipe PC $10.41 PC 03902 LCC200 For 2.0" Dia. Plastic Pipe PC $13.04 PC 03903 LCC300 For 3.0" Dia. Plastic Pipe PC $18.24 PC 03904 LCC400 For 4.0" Dia. Plastic Pipe PC $29.93 PC Series RTC Intumescent Firestop Collars 03835 RTC350 For 3" and 4" Trade Size Pipe and Corresponding Fittings PC $41.96 PC Intumescent Wrap Strip and Accessories 03701 SSWBLU Blue Wrap Strip (2"Wx3/16"Tx12'L) PC $120.76 PC 03711 SSWBLU2 Blue Wrap Strip (2"Wx1/8"Tx12'L) PC $120.76 PC 03720 SSWBLU220 1/8" Thick x 3" W x 10" L - Precut Wrap Strip for 2" Pipe PC $4.13 PC 03730 SSWBLU230 1/8" Thick x 3" W x 11-5/8" L - Precut Wrap Strip for 3" Pipe PC $8.96 PC 03740 SSWBLU240 1/8" Thick x 4" W x 14-7/8" L - Precut Wrap Strip for 4" Pipe PC $15.19 PC 03125 SSW125 1/8" Thick x 1-1/2" W x 8-1/8" L - Precut Wrap Strip for 2" Pipe PC $2.97 PC Intumescent Wrap Strip and Accessories TRADE/RESALE PRICE SHEET JANUARY 1, 2010 Accu-Tech DIR Discount: 13.75% UPC Catalog Description Qty. MSRP Price Item # Number UM PRICE UM 730573- 03250 SSW250 1/4" Thick x 1-1/2" W x 12-1/8" L - Precut Wrap Strip for 3" Pipe PC $5.79 PC 03375 SSW375 3/8" Thick x 1-1/2" W x 16-1/8" L - Precut Wrap Strip for 4" Pipe PC $9.10 PC 03702 SSWRED Red Wrap Strip (1.5" W x 1/4" T x 12' L) PC $65.27 PC 03712 SSWRED2 Red Wrap Strip (1.5" W x 1/8" T x 12' L) PC $65.27 PC 03750 SSWRC Metal Restraining Collar 25' (For use with SSWBLU) PC $71.72 PC 03752 SSWRC2 Metal Restraining Collar 25' (For use with SSWRED) PC $50.98 PC Preformed Restraining Collar for 6" & 8" Plastic Pipe 03753 WSC-8 (For use with SSWBLU) PC $35.39 PC Preformed Restraining Collar for 6" Plastic Pipe 03754 WSC-8RED (For use with SSWRED) PC $33.15 PC Preformed Restraining Collar for 10" & 12" Plastic Pipe 03760 WSC-12 (For use with SSWBLU) PC $35.39 PC 03775 SSWFT Foil Tape 2"x 30' PC $12.20 PC 70102 VPK-2 Vacuum Tubing Firestop Kit PC $7.05 PC Series SSM Firestop Mortar 04106 SSM106 Mortar 6 gal. Pail (22 Lbs. [10 Kilos]) PC $109.54 PC 04200 SSM22B Mortar Bag (22 Lbs. [10 Kilos]) PC $97.78 PC Spray Products 07104 CS105 Cable Spray 5 gal. Pail PC $288.72 PC 07107 AS205 Elastomeric Spray (Construction Joints) 5 gal. Pail PC $347.84 PC 01190 FT305 Fast-Tack™ Firestop Spray 5 gal. Pail PC $434.80 PC Smoke 'n' Sound™ Spray 01155 SNS205 Smoke & Acoustical Spray - 5 Gal. Pail 1,155 Cu. In. (19.0 L) PC $184.58 PC Composite Sheets 11628 CS1628 16 x 28 in. (41 x 71 cm) Composite Sheet PC $123.98 PC 12436 CS2436 24 x 36 in. (61 x 92 cm) Composite Sheet PC $206.65 PC 13636 CS3636 36 x 36 in. (92 x 92 cm) Composite Sheet PC $305.84 PC 14136 CS3641 36 x 41 in. (92 x 104 cm) Composite Sheet PC $347.17 PC 15228 CS2852 28 x 52 in. (71 x 132 cm) Composite Sheet PC $333.12 PC Ready™Sleeve Firestop Sleeves 20100 FS100 1" Firestop Sleeve PC $25.06 PC 20200 FS200 2" Firestop Sleeve PC $33.00 PC 20400 FS400 4" Firestop Sleeve PC $66.08 PC 20201 FS201 2" Firestop Sleeve w/ large escutcheon plates PC $36.99 PC 20401 FS401 4" Firestop Sleeve w/ large escutcheon plates PC $73.94 PC 21000 FSR100 1" Split Firestop Sleeve PC $72.85 PC 22000 FSR200 2" Split Firestop Sleeve PC $82.09 PC 24000 FSR400 4" Split Firestop Sleeve PC $105.66 PC Firestop Accessories 05001 SSAMW Mineral Wool Boards (2) - 2'x4'x1.5" Per Box BX $49.88 BX 05020 SSACG Caulk Gun (11 oz.) PC $7.28 PC 05021 SSAQCG Caulk Gun (Quart Size) PC $39.30 PC 05022 SSASCG Caulk Gun (Sausage Size) PC $72.88 PC 09560 Z1005-892-CG Firestop Penetration Warning Label (5 3/8" x 4 1/2") - Vinyl PC $0.43 PC 09555 Z1003-892-CG Red Warning Label (5 1/4" x 4 1/4") PC $0.43 PC 09556 Z1001-892-CG Fire & Smoke Barrier Label (8" x 11") PC $1.70 PC EZ-Path®Series 22 Fire-Rated Pathway 00022 EZD22 22 Series - Fire-Rated Pathway Device Kit PC $64.30 PC EZ-Path®Series 33 Fire-Rated Pathway 00004 EZD33FWS 33 Series - Fire-Rated Pathway Device PC $118.16 PC 33 Series - Fire-Rated Pathway Device Kit 00034 EZDP33FWS Full kit with device, wall plates & labels PC $129.47 PC 33 Series - Fire-Rated Pathway Device 00035 EZDP133CWK Full Kit with One Pair (2) Circular Wall Plates PC $135.55 PC 00005 EZD33E 33 Series - Extension Module PC $70.88 PC TRADE/RESALE PRICE SHEET JANUARY 1, 2010 Accu-Tech DIR Discount: 13.75% UPC Catalog Description Qty.
Load more

Recommended publications
  • FIRESTOP PRODUCTS NELSON Fire Brick
    FIRESTOP PRODUCTS NELSON Fire Brick Product Description Physical Properties Nelson Fire Brick is a soft, pliable, intumescent material that is ideal for applications where the Firestop • Color……………….Charcoal Gray application may be required to be re-penetrated. Upon • Weight……………..1.48 lbs. the event of a fire, the brick material expands within the • Dimensions……….. 2” x 5” x 8” opening, forming a solid char that prevents through • Intumescent activation temp. >300°F penetration of the fire. • Asbestos Filler ……None Test Compliance Application • ASTM E-814 and UL1479, Test method for Nelson Fire Brick is an economical, durable, labor through stop fire penetrations. saving firestop material for cable or cable tray Testing Data penetrations. Nelson Fire Brick should be installed For specific test criteria, refer to the UL Fire into a clean opening free of grease, dirt or loose Resistance Directory. particles. For general application guidelines, tightly Storage & Handling pack bricks into and around the penetrating item(s) Features Nelson Fire Brick should be stored in dry, covered within the annular space filling all voids. Install brick • Up to 2-Hour Ratings locations. There is no indication of shelf life limitations. centered within opening. Brick may be cut as • Easily Installed necessary to provide a tight fit between opening and Related References • Non-Shrinking penetrating item. Actual installation should be in Underwriters Laboratories Inc. "Fire Resistance • Non-Toxic accordance with the appropriate Nelson application Directory". Application details are available in • Easily Re-penetrable system drawing or applicable system in the UL Fire AutoCAD. format on request. • Excellent Shelf Life Resistance Directory.
    [Show full text]
  • DAS CONSTRUCTION STANDARDS for DAS OWNED FACILITIES
    DAS CONSTRUCTION STANDARDS For DAS OWNED FACILITIES March 2019 PUBLISHED BY STATE OF OREGON DEPARTMENT OF ADMINISTRATIVE SERVICES ENTERPRISE ASSET MANAGEMENT PLANNING AND CONSTRUCTION MANAGEMENT DIVISION TABLE OF CONTENTS Division 1 - General Requirements 01001 Basic Requirements 01002 Submittals 01003 Special Procedures 01004 Temporary Facilities and Controls Division 2 - Site Work 02630 Storm Drainage 02900 Landscaping Division 3 - Concrete 03521 Lightweight Insulating Concrete 03540 Cementitious Underlayment Division 4 - Masonry 04901 Brick and Stone Masonry & Repointing of Mortar Division 5 - Metals 05120 Structural Steel 05500 Metal Fabrications 05520 Handrails and Railings 05400 Cold Formed Metal Framing Division 6 - Wood and Plastic 06200 Finish Carpentry Division 7 - Thermal and Moisture Protection 07141 Hot Fluid-Applied Waterproofing 07142 Cold Fluid-Applied Waterproofing 07210 Thermal Insulation 07550 Modified Bituminous Membrane Roofing 07620 Sheet Metal Flashing and Trim 07840 Firestopping 07900 Joint Sealers Division 8 - Doors and Windows 08109 Doors-Frames-Door Hardware Division 9 - Finishes 09111 Non-Load-Bearing Metal Framing System 09260 Gypsum Board Assemblies 09900 Paints and Coatings Division 10 - Specialties 10170 Plastic Toilet Compartments 10171 Toilet Compartments & Urinal Screens 10260 Wall and Corner Guards 10270 Access Flooring 10440 Building Signage 10523 Fire Extinguishers and Cabinets 10800 Toilet, Bath and Laundry Accessories 10900 Custodial Requirements Division 11 - Equipment 11005 Fall Protection Systems
    [Show full text]
  • DIVISION 7 ‐ THERMAL and MOISTURE PROTECTION Section Title Number 07 00 00 THERMAL and MOISTURE PROTECTION
    DIVISION 7 ‐ THERMAL AND MOISTURE PROTECTION Section Title Number 07 00 00 THERMAL AND MOISTURE PROTECTION 07 10 00 DAMPPROOFING AND WATERPROOFING 07 11 00 Dampproofing 07 13 00 Sheet Waterproofing 07 14 00 Fluid‐Applied Waterproofing 07 20 00 INSULATION 07 21 00 Thermal Insulation 07 24 00 Exterior Insulation and Finish Systems 07 26 00 Vapor Retarders 07 30 00 STEEP SLOPE ROOFING 07 31 13 Asphalt Shingles 07 40 00 ROOFING AND SIDING PANELS 07 50 00 MEMBRANE ROOFING 07 51 00 Built‐Up Bituminous Roofing 07 54 00 Thermoplastic Membrane Roofing 07 60 00 FLASHING AND SHEET METAL 07 70 00 ROOF AND WALL SPECIALTIES AND ACCESSORIES 07 72 00 Roof Accessories 07 76 00 Roof Pavers 07 80 00 FIRE AND SMOKE PROTECTION 07 82 00 Board Fireproofing 07 84 00 Fire‐stopping 07 84 13 Penetration Firestopping 07 90 00 JOINT PROTECTION 07 92 00 Joint Sealants and Caulking NORTHERN ARIZONA UNIVERSITY – Technical Standards Project xx.xxx.xxx – Project Name Updated 7/1/2018 1 OF 57 DIVISION 7 ‐ THERMAL AND MOISTURE PROTECTION Section Title Number 07 00 00 THERMAL AND MOISTURE PROTECTION Part 1 – General This general discussion section contains information that is critical to successful moisture protection systems in new construction and renovation, but which is not the sole responsibility of any individual trade. In many cases, the issues involved are fundamental to the basic design of the project. BELOW GRADE SPACES Wherever below grade walls are exposed to naturally occurring groundwater or substantial landscape irrigation water, even if simply foundation walls, include a foundation drainage system in addition to dampproofing or waterproofing the walls.
    [Show full text]
  • DIVISION 7 - THERMAL and MOISTURE PROTECTION Section Title Number 07 00 00 THERMAL and MOISTURE PROTECTION
    DIVISION 7 - THERMAL AND MOISTURE PROTECTION Section Title Number 07 00 00 THERMAL AND MOISTURE PROTECTION 07 10 00 DAMPPROOFING AND WATERPROOFING 07 11 00 Dampproofing 07 13 00 Sheet Waterproofing 07 14 00 Fluid-Applied Waterproofing 07 20 00 INSULATION 07 21 00 Thermal Insulation 07 24 00 Exterior Insulation and Finish Systems 07 26 00 Vapor Retarders 07 30 00 STEEP SLOPE ROOFING 07 31 13 Asphalt Shingles 07 40 00 ROOFING AND SIDING PANELS 07 50 00 MEMBRANE ROOFING 07 51 00 Built-Up Bituminous Roofing 07 54 00 Thermoplastic Membrane Roofing 07 60 00 FLASHING AND SHEET METAL 07 70 00 ROOF AND WALL SPECIALTIES AND ACCESSORIES 07 72 00 Roof Accessories 07 76 00 Roof Pavers 07 80 00 FIRE AND SMOKE PROTECTION 07 82 00 Board Fireproofing 07 84 00 Fire-stopping 07 84 13 Penetration Firestopping 07 90 00 JOINT PROTECTION 07 92 00 Joint Sealants and Caulking NORTHERN ARIZONA UNIVERSITY – Technical Standards Project xx.xxx.xxx – Project Name Updated 01/08/2021 1 OF 57 DIVISION 7 - THERMAL AND MOISTURE PROTECTION Section Title Number 07 00 00 THERMAL AND MOISTURE PROTECTION Part 1 – General This general discussion section contains information that is critical to successful moisture protection systems in new construction and renovation, but which is not the sole responsibility of any individual trade. In many cases, the issues involved are fundamental to the basic design of the project. BELOW GRADE SPACES Wherever below grade walls are exposed to naturally occurring groundwater or substantial landscape irrigation water, even if simply foundation walls, include a foundation drainage system in addition to dampproofing or waterproofing the walls.
    [Show full text]
  • Products for Electrical and Datacom Applications FIRESTOPPING
    FIRESTOPPING Products for Electrical and Datacom Applications The Industry’s Most Complete Line of Firestop Products for High-TrafficTM and Permanent Firestopping Applications www.stifirestop.com Innovative Firestop Solutions for Electrical and Datacom Applications Service, Technology, Innovation Polymer jacketed cables found in datacom applications are considered to be com- bustible. Combustible penetrants pose a potentially greater risk than noncombus- tible penetrants as they may melt or burn out causing openings to develop within a firestop. Intumescent firestop technology (expands with heat) is required to com- pensate for the loss of mass when jackets burn away. Additionally, while some data- SPECIFIED TECHNOLOGIES INC. com firestop installations are permanent, future growth requirements to accommo- Specified Technologies, Inc. (STI) is an date cable moves, adds, and changes will likely require a retrofittable system. The industry leader solely committed to the development of innovative, reliable materials and methods selected to seal these penetrations must be chosen with firestopping solutions that help stop the these performance requirements in mind. spread of fire, smoke and toxic fumes. For over 25 years, our management High-Traffic Firestop Products team has worked hand in hand with the Retrofittable product choice is generally driven by penetration opening size and construction industry to create innovative cable change frequency. At STI we refer to these retrofittable datacom penetra- firestop solutions for all types of new tions as High-Traffic™ openings. The need for communications and data cabling construction and retrofit applications. in today’s buildings continues to explode. Openings made to accommodate the ® We offer the broadest range of UL building’s original cable requirements quickly fill up, making cable moves, adds, Classified Systems — more than any other manufacturer.
    [Show full text]
  • Series Ssb Firestop Pillows
    PRODUCT DATA SHEET SERIES SSB FIRESTOP PILLOWS APPLICATIONS PRODUCT DESCRIPTION SpecSeal® Firestop Pillows are designed for SpecSeal® Firestop Pillows are through-penetration firestop products resembling small cushions or firestopping medium to large openings containing soft bricks. These intumescent and highly resilient pillows are installed in openings by compressing and various penetrating items such as pipes, conduits, stacking into the opening in a brick-like fashion. cables, insulated metal pipes, bus ducts and HVAC ducts. Pillows are particularly well suited SpecSeal® Firestop Pillows consist of a mineral fiber core material sealed with a water-resistant for applications involving data, communications, intumescent membrane. This coated core material is then heat-sealed in a tough, nonirritating, fire- power or control cables, innerducts and cable retardant poly bag. trays. This method of sealing offers easy retro- fitting of cable installations without the need to FEATURES damage the firestop seal. Difficult applications such as one-sided shaft wall installations and other • Intumescent: Expands in all directions for a tough, tight seal. applications where access is restricted to one side of the assembly may be easily firestopped • Reinstallable for easy retrofitting of cables. with this material. • Lightweight for ease of installation. Easier wire screen requirements. • Heat-Sealed Poly Bag: Strong & durable. No sewn seams to unravel or tear. No irritating fiberglass. • Monolithic Encapsulated Core: No loose fill! • No Special Tools Required! • Superior Air Leakage Ratings! PERFORMANCE SSB Pillows are the basis for systems that meet the exacting criteria of ASTM E814 (UL1479) as well as the time-temperature requirements of ASTM E119 (UL263). Tested systems will provide up to three-hour rating for penetrations through concrete, CMU, or concrete tilt-up walls, as well as concrete or concrete over steel deck floors.
    [Show full text]
  • Specifications
    SPECIFICATIONS PROJECT NO: 24-4704-18083 Renovation of the DHQ Warehouse El Paso District Headquarters El Paso District 24, El Paso County 13301 GATEWAY WEST EL PASO, TX 79928-5410 ISSUE FOR CONSTRUCTION DESIGN SUBMITTAL 16 OCTOBER 2018 This page was intentionally left blank. RENOVATION of the WAREHOUSE EL PASO DISTRICT HEADQUARTERS EL PASO DISTRICT – 24, EL PASO COUNTY PROJECT NO. 24-4704-18083 SPECIFICATIONS INDEX DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 00 00 02 Index of Drawings 00 00 10 Specifications Index BALANCE OF DIVISION 00 BY TxDOT DIVISION 01 - GENERAL REQUIREMENTS 01 10 00 Summary of Work 01 20 00 Price and Payment Procedures 01 30 00 Administrative Requirements 01 33 00 Submittal Procedures 01 40 00 Quality Requirements 01 40 10 Testing Laboratory Services 01 60 00 Product Requirements 01 63 00 Substitutions and Product Options 01 70 00 Execution and Closeout Requirements 01 73 10 Cutting and Patching DIVISION 02 - EXISTING CONDITIONS 02 41 19 Selective Demolition 02 82 00 Asbestos Abatement Texas Department of Transportation Asbestos Survey Report El Paso DHQ Warehouse Remodel Building 248015, dated August 8, 2018 DIVISION 03 – CONCRETE 03 30 00 Cast-In-Place Concrete Specifications Index Page 1 Renovation of the DHQ Warehouse El Paso District Headquarters El Paso District 24, El Paso County Project No: 24-4704-18083 DIVISION 04 - MASONRY 04 20 00 Unit Masonry DIVISION 05 - METALS 05 50 00 Metal Fabrications DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES 06 10 00 Rough Carpentry DIVISION 07 - THERMAL AND MOISTURE
    [Show full text]
  • Even Under Fire Shutterstock 3596804
    3M Fire Protection Products Full Line Brochure Confidence Even Under Fire ShutterStock 3596804 ShutterStock 916946 Table of Contents Progress & Trends ........................................................................4–5 Partnership, Training & Testing ......................................................6–7 Through-Penetration Firestops ....................................................8–18 Residential & Non-Rated Fireblocks ................................................. 19 Construction Joint Firestops ......................................................20–21 Flexible Wrap Fire Protection .....................................................22–24 Ordering Information ................................................................25–30 Online Resources ........................................................................... 31 3 Protecting Lives for More Than 30 Years In 1974, the movie Towering Inferno † sparked the imagination of Richard Licht, a 3M product developer who passionately believed 3M technologies could be used to improve the safety of multi-story buildings. Several devastating fires — including the 1980 MGM Grand Hotel fire that killed 84 people and injured 679 — inspired Licht to develop the first firestop products based on existing 3M intumescent technology. Recognized by many as “one of the fathers of firestopping,” Licht also helped develop some of the first firestop requirements in commercial building codes. He worked tirelessly to make the codes more progressive to improve the safety of all buildings. † Produced
    [Show full text]
  • Stifirestop.Com PRODUCT SELECTOR
    FIRESTOPPING Products for Life Safety and Code Compliance www.stifirestop.com PRODUCT SELECTOR SPECIFIED TECHNOLOGIES INC. Specified Technologies Inc. (STI) is an industry leader solely committed to the development of innovative, reliable firestopping solutions that help stop the spread of fire, smoke and toxic fumes. For over 25 years, our management team has worked hand in hand with the construction industry to create innovative firestop solutions for all types of new construction and retrofit applications. ® We offer the broadest range of UL ©2009 Specified Technologies, Inc. Classified Systems — more than any other manufacturer. We keep material FIRESTOP SEALANTS requirements to a minimum and we design Triple S® Intumescent Sealant — Pg. 4 systems with the installer in mind. The Premium grade intumescent firestop sealant featuring STI’s patented result is less labor and significantly lower two-stage intumescent technology. Triple S can be used in most installed costs. common through-penetrations as well as a variety of membrane A penetrations and construction joints. LCI Intumescent Sealant — Pg. 4 Standard grade intumescent firestop sealant engineered to economically address many common through-penetration applications in light commercial construction. LC Endothermic Sealant — Pg. 5 High quality, non-halogenated firestopping sealant designed for non-combustible penetrants in through-penetrations and construction joints. PENSIL® Silicone Products — Pg. 7 A 100% silicone firestop caulk engineered to rapidly cure and resist washout (W Ratings) when used in exposed applications. Also used in construction joint applications. RESIDENTIAL CAULK WF300 Firestop Caulk — Pg. 5 Intumescent firestop caulk designed for sealing through-penetrations and gaps in fire resistance-rated wood frame construction.
    [Show full text]
  • Series SSB Firestop Pillows
    product dAtA SHeet SerieS SSB FireStop pillowS ApplicAtionS product deScription SpecSeal® Firestop Pillows are designed for SpecSeal® Firestop Pillows are through-penetration firestop products resembling small cushions or firestopping medium to large openings containing soft bricks. These intumescent and highly resilient pillows are installed in openings by compressing and various penetrating items such as pipes, conduits, stacking into the opening in a brick-like fashion. cables, insulated metal pipes, bus ducts and HVAC ducts. Pillows are particularly well suited SpecSeal® Firestop Pillows consist of a mineral fiber core material sealed with a water-resistant for applications involving data, communications, intumescent membrane. This coated core material is then heat-sealed in a tough, nonirritating, fire- power or control cables, innerducts and cable retardant poly bag. trays. This method of sealing offers easy retro- fitting of cable installations without the need to FeAtureS damage the firestop seal. Difficult applications such as one-sided shaft wall installations and other • intumescent: Expands in all directions for a tough, tight seal. applications where access is restricted to one side of the assembly may be easily firestopped • reinstallable for easy retrofitting of cables. with this material. • lightweight for ease of installation. Easier wire screen requirements. • Heat-Sealed poly Bag: Strong & durable. No sewn seams to unravel or tear. No irritating fiberglass. • monolithic encapsulated core: No loose fill! • no Special tools required! • Superior Air leakage ratings! perFormAnce SSB Pillows are the basis for systems that meet the exacting criteria of ASTM E814 (UL1479) as well as the time-temperature requirements of ASTM E119 (UL263). Tested systems will provide up to three-hour rating for penetrations through concrete, CMU, or concrete tilt-up walls, as well as concrete or concrete over steel deck floors.
    [Show full text]
  • Section 078400 Firestopping
    SECTION 078400 FIRESTOPPING PART I - GENERAL 1.01 RELATED DOCUMENTS A. The requirements of the GENERAL CONDITIONS, SUPPLEMENTARY CONDITIONS, and DIVISION 1 GENERAL REQUIREMENTS apply to the work of this SECTION. B. Coordinate work of this Section with the work of the following Sections and Divisions to properly execute the work in order to maintain the hourly ratings of the walls and floors where fire stopping and smoke- seals are applied. 1. Division 3 - Concrete 2. Division 4 - Masonry 3. Division 7 - Thermal and Moisture Protection 4. Division 9 - Gypsum Wall Assemblies 5. Division 21 - Fire-Suppression 6. Division 22 - Plumbing 7. Division 23 - HVAC 8. Division 26 - Electrical 1.02 DESCRIPTION A. This SECTION describes the requirements for furnishing and installing fire stopping for fire-rated construction. This includes: 1. All openings in fire-rated floor and wall assemblies, both blank (empty) and those accommodating penetrating items such as cable conduits, pipes, ducts, etc. 2. Gaps (openings) between exterior curtain walls and the outer perimeter edge of structural floor. 3. Openings at each floor level in shafts or stairwells. 4. Joints in rated walls and floors between similar and dissimilar construction materials allow 100% movement, 1” (total) positive/negative and lateral movement of the construction components. 1.03 QUALITY ASSURANCE A. Fire stopping materials shall conform to Flame (F) and Temperature (T) ratings as required by applicable building codes and tested by nationally accepted test agencies per ASTM E 814 or UL 1479 fire tests for through penetrations, and ASTM E 1966 or UL 2079 for construction joints, and UL 2307 for perimeter edge joints.
    [Show full text]
  • Division 10 - Specialties
    DIVISION 10 - SPECIALTIES Section Title Number 10100 CHALKBOARDS AND TACKBOARDS 10110 Chalkboards 10115 Markerboards 10120 Tackboards 10130 Operable Board Units 10150 COMPARTMENTS AND CUBICLES 10160 Metal Toilet Compartments 10165 Plastic Laminate Toilet Compartments 10260 WALL AND CORNER GUARDS 10300 FIREPLACES AND STOVES 10305 Prefabricated Fireplaces 10350 FLAGPOLES 10352 Ground Set Flagpoles 10400 IDENTIFYING DEVICES 10420 Plaques 10430 Exterior Signs 10440 Interior Signs 10500 LOCKERS 10505 Metal Lockers 10520 FIRE PROTECTION SPECIALTIES 10522 Fire Extinguishers, Cabinets and Accessories 10523 Firestop system – fire caulking 10530 PROTECTIVE COVERS 10532 Walkway Covers 10538 Canopies 10600 PARTITIONS 10630 Portable Partitions, Screens and Panels 10670 STORAGE SHELVING 10675 Metal Storage Shelving 10688 Prefabricated Wood Storage Shelving 10750 TELEPHONE SPECIALTIES 10800 TOILET AND BATH ACCESSORIES 10810 Toilet Accessories Commercial Accessories 10820 Bath Accessories 10900 WARDROBE AND CLOSET SPECIALTIES NORTHERN ARIZONA UNIVERSITY - Technical Standards (12/15/2012) 1 of 19 DIVISION 10 - SPECIALTIES Section Title Number 10100 CHALKBOARDS AND TACKBOARDS General The minimum vertical writing surface per room shall be not less than 64 s.f.. 80 s.f. is normal. All vertical writing surfaces shall have a continuous tray at the base for chalk, markers and erasers. They shall also have a top 1" cork strip. Two sets of markers shall be included with every 8' of marker board. Two erasers and four map clips shall be included with every 8' of chalk or marker board. 10110 Chalkboards Chalkboards shall be specified upon request by the user group. 10115 Markerboards Dry markerboards shall be: Porcelain boards, a face sheet of 24 gauge enameling grade steel, with a three coat porcealinize process, a writing coat greater or equal to 0.0025".
    [Show full text]