Workshop Operation Safety
Total Page:16
File Type:pdf, Size:1020Kb
VERSION 04/2018 WORKSHOP OPERATIONAL SAFETY Set of 5 units including chain Ref. no. 50173 086 \ WORKSHOP 04/2018 WWW.HAHN-KOLB.COM [email protected] PREVENT HAZARDS FLUORESCENT TRAFFIC CONE Order directly as a set! made from sturdy PVC Application: Design: for use in operational and non-public areas. for quick • 5 freely rotatable polyethylene chain and short-term closures and safety measures. hooks • simply mounted on Advantage: the cone • easy to see thanks to fluorescent, red-orange colour • 10 m plastic chain • durable and affordable for hooking in Note: in public areas, traffic cones in accordance with the technical ALL-ROUND MIRROR delivery conditions are required Helps avoid accidents Base length x width (mm) Height 50173... 50173... (mm) Ref. no. Ref. no. 290 x 290 500 085 086 Application: • distortion-free 360° PROTECTIVE BAR FOR INDOOR USE Facilitates a 360° all-round view all-round view and thus ideal visibility at junc- Effective route protection WARNING TAPE HOLDER AND • attachment directly onto tions and in areas with restricted level ceiling using conven- CHAIN WARNING POSTS SET WARNING TAPE Application: visibility. Ideal for forklift truck tional screws (not included For securing and delimiting operating paths and vulnerable 6 posts + 10 m chain traffic, for indoor applications. in scope of delivery) or to areas. optional assembly set no. Design: 50179526 with 4 m chain for Design: Quick and easy barrier • acrylic glass suspended attachment • Made of stable steel profile tube, hot-dip galvanised • extreme wide-angle effect NEW • incl. sleeve anchor for floor mounting on concrete surface • Tube diameter of 42 mm, height 1000 mm • With black reflective tape Ø (mm) Distance (m) 50179... Ref. no. • material thickness: 2 mm 600 3 521 • Surface: Powder-coated, zinc yellow RAL 1018 800 4 522 900 5 523 1000 6 524 Length (mm) 50172... Application: Application: Design: Ref. no. Mounting set 50179... 1,000 401 for simple, fast and mobile cordoning off in storage, production, ship- quickly secure construction • made from ribbed Ref. no. 1,500 404 ping and administration areas. for indoor and temporary outdoor use. sites and dangerous areas. round steel, 1 set 526 2,000 407 effectively block danger- 1,250 mm high Design: ous areas, entrances and • with safety bar • plastic upper section parking areas. • painted red • cap with four integrated chain mounts effortlessly mark traffic (bundles) • low centre of gravity, secure footing routes and obstacles. • with pointed tip for • red/white post, 870 mm high, Ø 40 mm with integrated plug MORE THAN 60,000 PRODUCTS easy insertion into the connector for secure attachment to the base plate Advantage: FOR MAXIMUM INNOVATION. • made from polyethylene, ground Delivery: 6 chain stands, 10 m chain (M-POLY visible), 500 m x 80 mm • Diameter 12 mm WE HAVE WHAT IT TAKES. 10 connecting links and 10 mounting hooks • cordon off quickly Note: Note: • tear-resistant and Minimum order quantity Maximum distance between chain stands: 2.0 m affordable 10 pieces Shape of Dimensions Design of base plate 50173... base plate of base plate Ref. no. Triangular 300 mm side length Plastic, filled with concrete 133 50173... 50173... Square 265x265 mm Hard rubber 143 Ref. no. Ref. no. Round 300 mm in diameter Plastic, refillable 153 093 099 2 For a complete range of products that meets the 3 toughest demands, visit www.hahn-kolb.com \ WORKSHOP 04/2018 WWW.HAHN-KOLB.COM [email protected] MARK HAZARDOUS AREAS NO STUMBLING DURALINE STRONG ANTI-SLIP ADHESIVE TAPES FLOOR MARKING TAPES Prevents slipping and accidents OR SLIPPING Flexible and durable Application: Design: Versatile use and easy to glue, e.g on stair steps, ladders, • self-adhesive, extra strong floor marking tape for indoor use. ramps, paths, entry areas, loading zones or in front of • slip prevention in accordance with ASR A1.5/1.2 machines, for use inside and outside (not suitable for wet as per DIN 51130 (R group) R10. for durable labelling of areas). walkways and roadways EXTREMELY GOOD Design: • abrasion-resistant and durable thanks to extruded Floor markings are ideal for delineating individual work ADHESION • Self-adhesive, anti-slip adhesive tape with rough surface material with tape thickness of up to 1.2 mm. areas as well as for flexible workplace organisation based made of aluminium oxides on a polymer backing bevelled edges provide strong adhesive force. on lean management methods. The DURABLE floor markings and safety signs correspond to the • Slip prevention R13 in accordance with EN 13552 • length: 30 m x width: 50 mm occupational health and safety guidelines and DIN ISO standards • Temperature-resistant from -20°C to +60°C and which currently apply. UV-resistant • 1 roll width 50 mm, length per roll 18.3 m Thickness (mm) Colour 50173... Ref. no. 1.2 Signal yellow RAL 1003 500 1.2 Signal red RAL 3001 501 1.2 Signal green RAL 6032 502 Colour Black Black | yellow Red | white Yellow Transparent 0.7 Yellow/black 503 50225... Ref. no. 130 132 134 136 138 0.7 Red/white 504 0.7 Green/white 505 CABLE BRIDGE, LARGE CABLE BRIDGE, SMALL High-strength rubber mixture EXTREMELY ROBUST SAFETY LABEL Quickly identify hazards Application: Allows cables, hoses and piping to be driven over without issue and drastically reduces the risk of tripping. Designed for occasional Application: For labelling hazardous areas, heavy loads, tested up to 12 t axle load. parking spaces, walkways, etc. Design: • 3 cable shafts: 2 ducts 68 x 50 mm (W x H), Application: Design: 1 duct 55 x 50 mm (W x H) For protecting cables and hoses and for • in accordance with ASR A1.3 and DIN EN ISO 7010 • extendible modular system preventing trip hazards. • Slip-resistance according to DIN 51130 (R group) R9 • self-adhesive safety label for attaching • cable bridge dimensions (L x W x H): 960 x 600 x 75 mm Design: to floors in the interior, such as warehouses, production areas • end element dimensions (L x W x H): 283 x 600 x 75 mm • suitable for use on trucks and forklifts • abrasion-resistant and durable • combined net length: 870 mm • flexible, high-strength mixed rubber • Dimensions: Ø 430 mm, thickness: 0.4 mm Advantage: • profiled, slip-resistant surface, can be easily driven over • high load-bearing capacity owing to special solid rubber compound • underside with non-slip rubber lips Symbol 50173... Ref. no. • ribbed, non-slip surface • 3 cable channels: 2 x 20 mm and 1 x 45 mm No smoking 510 • permanent attachment possible owing to integrated dowel mounts • Length x width x height: 1,200 x 210 x 65 mm Use ear protection 511 Access prohibited 512 Design 50226... Use the pedestrian walkway 513 Ref. no. Colour 50226... Pedestrians prohibited 514 Basic element 010 Ref. no. Use foot protection 515 End piece | female 012 Yellow 001 Warning of industrial trucks 516 End piece | male 014 Black 003 Wear reflective safety vest 517 4 5 \ WORKSHOP 04/2018 WWW.HAHN-KOLB.COM [email protected] WORK SAFELY AT HEIGHT USE OF A WORK PLATFORM IS MANDATORY! Folding back protection available on both sides H A B Ref. no. 404 Ref. no. 613 Ref. no. 616 ZAP STEP LADDER Z 600 with a large platform and railing Design: • Large working platform (400 x 400 mm). Forklift pockets Ref. no. 402 Ref. no. 403 • 3-sided railings around circumference for maximum safety available on both sides • Storage tray for tools and small parts • Optimum stability thanks to rigid connections on both sides • Compact folded dimensions through automatically-retractable with fork protection on the unused fork pockets ALUMINIUM SERVICE PLATFORM safety cage • Replaceable 2-component plastic end caps which fit securely on the rail and ensure that the ladder does not slip Advantage: WORK PLATFORM Application: The proven and lightweight aluminium machine step for demand- 80 mm deep steps with ZARGES Safer Step technology UNIVERSAL WORKING PLATFORM MADE FROM STEEL TUBE ing industrial applications with non-slip steps. Technical data: secure mounting from 2 sides Cost-effective work platform Design: • Max. load capacity: 150 kg Design: Design: • Robust, welded tubular structure • Material: aluminium • Length x width x height 1,040 x 1,300 x 2,155 mm • Length x width x height 1,040 x 835 x 1,900 mm • 240 mm deep steps made of aluminium checker plate • EN standard: 131 • Base area 800 x 1200 mm • Base area 740 x 740 mm • Upper base area 520 x 305 mm • Beam height of rising part: 73 mm • Robust square tube construction • Sturdy tubular construction • Non-slip foot caps • Beam height of support part: 58 mm • Non-slip working platform • Non-slip working platform Technical data: • Fork pockets with slide guards • Fork pockets with slide guards EN standard: 14183 Number Working Length Plat- Vertical Base Weight 50260... • Galvanised tool tray • Galvanised tool tray of steps height (m) form height width (kg) Ref. no. • TÜV-tested in accordance with German Social Accident • TÜV-tested in accordance with German Social Accident Insur- (incl. (m) height (m) (m) Accessibility One-sided plat- (m) Insurance (DGUV) ance (DGUV) form) Number Platform Surface area Working Weight 50259... 1 x 2 2.52 1.40 0.52 1.32 0.56 9 612 • Surface painted in Yellow Orange RAL 2000 • Surface painted in Yellow Orange RAL 2000 of steps height (m) height (kg) Ref. no. (incl. (m) (m) 1 x 3 2.78 1.68 0.78 1.57 0.59 10 613 platform) 1 x 4 3.04 1.96 1.04 1.84 0.62 11 614 1 x 1 0.2 0.36 x 0.59 2.2 2.4 401 1 x 5 3.35 2.21 1.32 2.10 0.65 13 615 Load-bearing Max.