ENGLISH

PLASMA TV OWNER’S MANUAL

PLASMA TV MODELS 42PG69** 50PG69**

Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.

This product qualifies for ENERGY STAR in the “factory default (Home mode)” setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consump- Trademark of the DVB Digital Video Broadcasting Project (1991 to 1996) tion that could exceed the limits necessary to qualify for Energy Star rating. ID Number(s): 5506: 42PG6900 5508: 50PG6900 5528: 42PG6910 5529: 50PG6910

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. ACCESSORIES

Owner’s Manual Batteries Power Cord

IN P U D T /A TV /RA P I DIO O NP W U E T R M O BRIGHT D SIM E This feature is not available for all models. T PL V INK T E D X V T D IN V F C O i R LI VE TV

BA EX C IT K D V T R IM M SH E E I N FT U

GUIDE OK

T IM V S E * Lightly wipe any stains or fingerprints on H O M I AR F L K T F AV

123P M R U TE 456 the surface of the TV with the polishing 789

L IST

U 0 PD AT cloth. E SL Q.VIEW E INDEX EP SU BT ITL HO E L T D IM E R A R ? TI E O VE AL I /II Polishing Cloth Do not use excessive force. This may cause Polishing cloth for use on scratching or discolouration. Remote Control the screen.

(50PG69** only) (42PG69** only)

Protection cover Ferrite core Cable management clip Cable Holder (Refer to p.9) (This feature is not available for all models.)

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is. Install the power plug closely.

1 CONTENTS

ACCESSORIES ...... 1 Auto Programme Tuning (In Analogue Mode) . . . . . 40 Manual Programme Tuning (In Analogue Mode) ...... 41 Fine Tuning (In Analogue Mode) ...... 42 PREPARATION Assigning a Station Name (In Analogue Mode) ...... 42

CONTENTS Programme Edit (In Analogue Mode) ...... 43 Selecting the Programme Table ...... 45 Home Menu ...... 4 Input Source Selection ...... 46 Front Panel Controls ...... 5 SIMPLINK Function ...... 47 Back Panel Information ...... 6 Please set it up carefully so the product does not fall over...... 7 DVR (DIGITAL VIDEO RECORDER) Back Cover for Wire Arrangement ...... 8 Desktop Pedestal Installation ...... 9 Wall Mount: Horizontal installation ...... 9 TimeShift Mode ( Pause & Replay of Live TV) . . . 49 Antenna Connection ...... 10 Instant Recording ...... 52 Manual Recording ...... 55 Recorded TV Programme List ...... 56 EXTERNAL EQUIPMENT SETUP Schedule List ...... 60 Record Quality ...... 61 Format Hard Disc ...... 62 HD Receiver Setup ...... 11 DVD Setup ...... 13 Insertion of CI module ...... 15 EPG (Electronic programme guide)(In Digital Mode) VCR Setup ...... 16 Digital Audio Out Setup ...... 18 Switch on/off EPG ...... 63 Other A/V Source Setup ...... 19 Select a programme ...... 63 PC Setup ...... 20 Button function in NOW/NEXT guide mode . . . 63 - Screen Setup for PC Mode ...... 23 Button function in 8 days guide mode ...... 64 Button function in date change mode ...... 65 WATCHING TV / PROGRAMME CONTROL Button function in extended description box . . . 65 Record Popup ...... 66 Conflict pop-up ...... 66 Remote Control Key Functions ...... 27 Turning on the TV ...... 29 Programme Selection ...... 30 PICTURE CONTROL Volume Adjustment ...... 30 On Screen Menus Selection and Adjustment . . . . 31 Picture Size (Aspect Ratio) Control ...... 67 Auto Programme Tuning (In Digital Mode) ...... 32 Preset Picture Settings Manual Programme Tuning (In Digital Mode) . . . . 33 - Picture Mode-Preset ...... 69 Programme Edit (In Digital Mode) ...... 34 - Auto Colour Tone Control (Warm/Medium/Cool) . . . . .70 5V antenna Power (In Digital Mode only) ...... 36 Manual Picture Adjustment Booster (In Digital Mode only) ...... 36 - Picture Mode-User option ...... 71 Software Update (In Digital Mode only) ...... 37 - Colour Tone - User option ...... 72 Diagnostics (In Digital Mode only) ...... 38 CI Information (In Digital Mode only) ...... 39

2 XD - Picture Improvement Technology ...... 73 TELETEXT XD Demo ...... 74 Advanced - Cinema ...... 75 Switch on/off ...... 96 Advanced - Black(Darkness) Level ...... 76 SIMPLE Text ...... 96 CONTENTS Picture Reset ...... 77 TOP Text ...... 96 Image Sticking Minimization(ISM) Method ...... 78 FASTEXT ...... 97 Low-Power Picture Mode ...... 79 Special Teletext Functions ...... 97

SOUND & LANGUAGE CONTROL DIGITAL TELETEXT Auto Volume Leveler ...... 80 Preset Sound Settings - Sound Mode ...... 81 Teletext within Digital Service ...... 98 Sound Setting Adjustment - User Mode ...... 82 Teletext in Digital Service ...... 98 Balance ...... 83 TV Speakers On/ Off Setup ...... 84 Selecting digital audio out ...... 85 APPENDIX I/II - Stereo/Dual Reception (In Analogue Mode Only) . . . . 86 Troubleshooting ...... 99 - NICAM Reception (In Analogue Mode Only) ...... 87 Maintenance ...... 101 - Speaker Sound Output Selection ...... 87 Product Specifications ...... 102 On-Screen Menu Language/Country Selection ...... 88 Programming the Remote Control ...... 103 Language selection (In Digital Mode only) ...... 89 IR Codes ...... 105 External Control Device Setup ...... 107 TIME SETTING

Clock Setup ...... 90 Auto On/ Off Timer Setting ...... 91 Auto Shut-off Setting ...... 92 Time zone Setup ...... 93 Sleep Timer Setting ...... 93

PARENTAL CONTROL / RATINGS

Set Password & Lock System ...... 94 Parental Control ...... 95

3 PREPARATION

HOME MENU

This menu is a contents guide. In the Home Menu, you can access the Recorded list of the DVR, Manual Recording of the DVR, Schedule List or the TV Menu. PREPARATION

INPUT MODE D/A POWER TV Home TV/RADIO DVD INPUT BRIGHT VCR Free Space This displays the remaining record SIMPLINK TEXT INFO i LIVE TV time for analogue input. (Analog TV, AV1,AV2, AV3) This displays the remaining record time for DTV input.

Recorded TV DVR p.49 BACK MENU DVR EXIT GUIDE Programme Guide EPG p.63

TIME OK TIME SHIFT SHIFT Schedule List

Manual Record MARK FAV VOL PR TV Menu TV Menu p.31 MUTE

4 FRONT PANEL CONTROLS ■ Image shown may differ from your TV. PREPARATION

Remote Control Sensor POWER

Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on.

INPUT MENU OK - VOL + PR

INPUT MENU OK -+VOL PR

INPUT INPUTMENU MENUOK -+VOL OK PRVOLUME PROGRAMME

Swivel Stand After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

5 PREPARATION

BACK PANEL INFORMATION ■ Image shown may differ from your TV.

10 PREPARATION

1

2 3 4 5

2

11

6 7 8 9

1 Power Cord Socket 6 OPTICAL DIGITAL AUDIO OUT This TV operates on an AC power. The voltage is Connect digital audio from various types of equip- indicated on the Specifications page. Never ment. attempt to operate the TV on DC power. Note: In standby mode, these ports do not work.

2 HDMI Input 7 RGB/DVI Audio Input Connect a HDMI signal to HDMI IN. Connect the audio from a PC or DTV. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. 8 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. 3 RGB Input Connect the output from a PC. 9 Antenna Input Connect RF antenna to this jack. 4 Component Input 10 PCMCIA (Personal Computer Memory Card Connect a component video/audio device to International Association) Card Slot these jacks. (This feature is not available in all countries.)

5 Euro Scart Socket (AV1/AV2) 11 S-Video Input Connect scart socket input or output from an Connect S-Video out from an S-VIDEO device. external device to these jacks. Audio/Video Input Connect audio/video output from an external device to these jacks.

6 PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESN’T FALL OVER.

■ You should purchase necessary components to fix the TV to the wall on the market. ■ Position the TV close to the wall to avoid the possibility of it falling when pushed. ■ The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possi- bility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. PREPARATION

1 2

1 Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2 Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

3

3 Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.

! NOTE G When moving the TV undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

7 PREPARATION

BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. 1 Connect the cables as necessary. To connect additional equipment, see the External equipment Setup section. PREPARATION

2 Install the CABLE MANAGEMENT CLIP as shown.

42PG69** 50PG69**

Fix the Cable Holder as shown and bundle the cables.

CABLE MANAGEMENT CLIP CABLE MANAGEMENT CLIP

How to remove the cable management clip

Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward. For the 42PG69** model, press the center of the CABLE MANAGEMENT CLIP and then lift it .

42PG69** 50PG69**

Separate CABLE MANAGEMENT from TV by pressing two latches.

! NOTE G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.

8 ■ The TV can be installed in various ways such as on a wall or on a desktop etc. ■ The TV is designed to be mounted horizontally.

EARTHING Power Supply Ensure that you connect the earth wire to prevent possible electric shock. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. Circuit breaker PREPARATION DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

4 inches

4 inches 4 inches 4 inches

WALL MOUNT:INPUT MENU OK -+VOL HORIZONTALPR INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.

4 inches

4 inches

4 inches 4 inches

4 inches

NOT USING THE DESK-TYPE STAND ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover for desk-type stand installation. PROTECTION COVER into the TV until clicking sound.

9 PREPARATION ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION

■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. PREPARATION

AV 1 AV 2 Wall Multi-family Dwellings/Apartments (Connect to wall antenna socket) Antenna ANTENNA Socket IN

RF Coaxial Wire (75 ohm) AV 1 AV 2 Outdoor

Antenna ANTENNA IN (VHF, UHF) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

- 5V antenna power works In Digital mode only. (Refer to p. 36)

UHF

Antenna Signal Amplifier

VHF

■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. ■ If signal needs to be split for two TVs,use an antenna signal splitter for connection.

10 EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP ■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connecting with a component cable

( ) 1 Connect the video outputs Y, PB, PR of the digital set top box to the COMPONENT IN VIDEO jacks on the EXTERNAL EQUIPMENT SETUP TV.

2 Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.

2 1 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4 Select Component input source using the INPUT button on the remote control.

Signal Component HDMI1/2/3

480i/576i Yes No 480p/576p Yes Yes 720p/1080i Yes Yes 1080 p No Yes

11 EXTERNAL EQUIPMENT SETUP

Connecting a set-top box with an HDMI cable

1 Connect the digital set-top box to HDMI/DVI IN1 , HDMI IN2 or HDMI IN3 jack on the TV.

2 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

1 EXTERNAL EQUIPMENT SETUP 3 Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.

Connecting with a HDMI to DVI cable

1 Connect the digital set-top box to HDMI/DVI IN1 jack on the TV.

2 Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.

1 3 Turn on the digital set-top box. (Refer to the owner’s 2 manual for the digital set-top box.)

4 Select HDMI1 input source using the INPUT button on the remote control.

12 DVD SETUP

Connecting with a component cable

Connect the video outputs (Y, PB, PR) of the DVD to the 1 COMPONENT IN VIDEO jacks on the TV.

2 Connect the audio outputs of the DVD to the EXTERNAL EQUIPMENT SETUP COMPONENT IN AUDIO jacks on the TV.

3 Turn on the DVD player, insert a DVD. 2 1 4 Select Component input source using the INPUT but- ton on the remote control.

5 Refer to the DVD player's manual for operating instructions.

Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV YPB PR

Y PB PR Video output ports Y B-Y R-Y on DVD player Y Cb Cr Y Pb Pr

13 EXTERNAL EQUIPMENT SETUP

Connecting with a Euro Scart cable

Connect the Euro scart socket of the DVD to the AV1 1 Euro scart socket on the TV.

2 Turn on the DVD player, insert a DVD.

3 Select AV1 input source using the INPUT button on EXTERNAL EQUIPMENT SETUP the remote control. If connected to AV2 Euro scart socket, select AV2 input source. 1

4 Refer to the DVD player's manual for operating instructions.

AUDIO/ (R) AUDIO (L) VIDEO

! NOTE G Any Euro scart cable used must be signal protected.

Connecting with a S-Video cable VIDEO S-VIDEO L R ANT IN

Connect the S-VIDEO output of the DVD to the S - 1 VIDEO input on the TV. OUTPUT ANT OUT SWITCH 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the TV. 1 2

3 Turn on the DVD player, insert a DVD.

4 Select AV3 input source using the INPUT button on the remote control.

5 Refer to the DVD player's manual for operating instruc- tions.

14 Connecting the HDMI cable

1 Connect the HDMI output of the DVD to the HDMI/DVI IN1 , HDMI IN2 or HDMI IN3 jack on the TV.

2 Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control. EXTERNAL EQUIPMENT SETUP

3 Refer to the DVD player's manual for operating instructions.

1

! NOTE G The TV can receive video and audio signals simultaneously when using a HDMI cable. G If the DVD player does not support Auto HDMI, you must TV the output resolution appropriately.

INSERTION OF CI MODULE

- To view the scrambled (pay) services in digital TV mode. 1 - This feature is not available in all countries.

Insert the CI Module to PCMCIA (Personal Computer TV 1 Memory Card International Association) CARD SLOT of TV as shown.

For further information, see p.39.

15 EXTERNAL EQUIPMENT SETUP

VCR SETUP

■ To avoid picture noise (interference), allow adequate distance between the VCR and TV. ■ If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.

Connecting with a RF cable

ANT OUT S-VIDEO VIDEO L R EXTERNAL EQUIPMENT SETUP AUDIO 1

OUTPUT ANT IN SWITCH

Wall Jack 2

Antenna

1 Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.

2 Connect the antenna cable to the ANT IN socket of the VCR.

3 Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing.

16 AUDIO

ConnectingAUDIO with a Euro Scart

Connect the Euro scart socket of the VCR to the AV1 1 Euro scart socket on the TV.

2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

Select AV1 input source using the INPUT button on 3 EXTERNAL EQUIPMENT SETUP the remote control.

1 4 If connected to AV2 Euro scart socket, select AV2 input source.

AUDIO/ (R) AUDIO (L) VIDEO

! NOTE G Any Euro Scart cable used must be signal shielded.

Connecting with an RCA cable

1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left 1 = white, and Audio Right = red)

2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3 Select AV3 input source using the INPUT button on the remote control.

S-VIDEO VIDEO L R ANT IN ! NOTE OUTPUT ANT OUT SWITCH G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.

17 EXTERNAL EQUIPMENT SETUP

Connecting with a S-Video cable

VIDEO S-VIDEO L R ANT IN Connect the S-VIDEO output of the VCR to the S - 1 VIDEO input on the TV. The picture quality is

AUDIO improved; compared to normal composite (RCA cable)

input. OUTPUT ANT OUT SWITCH 2 Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. 1 2 EXTERNAL EQUIPMENT SETUP 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

4 Select AV3 input source using the INPUT button on the remote control.

! NOTE

G If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.

1 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

2 Connect the other end of the optical cable to the digi- tal audio (optical) input on the audio equipment. 1

3 Set the “TV Speaker option - Off” in the AUDIO menu. (Gp.84). Refer to the external audio equipment instruction manual for operation.

2 CAUTION

GDo not look into the optical output port. Looking at the laser beam may damage your vision.

18 OTHER A/V SOURCE SETUP

Camcorder

Video Game Set EXTERNAL EQUIPMENT SETUP VIDEO L R

1

1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)

2 Select AV3 input source using the INPUT button on the remote control.

3 Operate the corresponding external equipment. Refer to external equipment operating guide.

19 EXTERNAL EQUIPMENT SETUP

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable

1 Connect the RGB output of the PC to the RGB IN (P C) jack on the TV. EXTERNAL EQUIPMENT SETUP 2 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 1

3 Turn on the PC and the TV.

2 4 Select RGB input source using the INPUT button on the remote control.

RGB OUTPUT AUDIO

Connecting with a HDMI to DVI cable

1 Connect the DVI output of the PC to the HDMI/DVI IN1 jack on the TV.

Connect the PC audio output to the AUDIO IN 2 1 (RGB/DVI) jack on the TV. 2

3 Turn on the PC and the TV.

4 Select HDMI1 input source using the INPUT button on the remote control.

DVI-PC OUTPUT AUDIO

! NOTE G If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. G If the PC does not support Auto DVI, you need to set the output resolution appropriately.

20 ! NOTE

G To enjoy vivid picture and sound, connect the PC G If using a sound card, adjust PC sound as required. to the TV. G This TV uses a VESA Plug and Play Solution. The G Avoid keeping a fixed image on the TV ’s screen for TV provides EDID data to the PC system with a prolonged periods of time.The fixed image may DDC protocol. The PC adjusts automatically when become permanently imprinted on the screen;use a using this TV. screen saver when possible. G DDC protocol is preset for RGB (Analogue RGB), G Connect the PC to the RGB (PC) or HDMI IN (or HDMI (Digital RGB) mode. HDMI/DVI IN) port of the TV; change the resolu- G If required, adjust the settings for Plug and Play tion output of PC accordingly. functionality. EXTERNAL EQUIPMENT SETUP G There may be interference relating to resolution, G If the graphic card on the PC does not output ana- vertical pattern, contrast or brightness in PC mode. logue and digital RGB simultaneously, connect only Change the PC mode to another resolution or change one of either RGB or HDMI IN (or HDMI/DVI IN) the refresh rate to another rate or adjust the bright- to display the PC output on the TV. ness and contrast on the menu until the picture is G If the graphic card on the PC does output analogue clear. If the refresh rate of the PC graphic card can not and digital RGB simultaneously, switch the TV to be changed, change the PC graphic card or consult either RGB or HDMI; (the other mode is set to Plug the manufacturer of the PC graphic card. and Play automatically by the TV.) G RGB input only supports the separate horizontal G DOS mode may not work depending on the video and vertical synchronization pulses in separate card if you use a HDMI to DVI cable. channels. G If you use too long an RGB-PC cable, there may be G Connect the signal cable from the monitor output interference on the screen. We recommend using port of the PC to the RGB (PC/DTV) port of the under 5m of cable. This provides the best picture TV or the signal cable from the HDMI output port quality. of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV. G Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).

21 EXTERNAL EQUIPMENT SETUP

Supported Display Resolution RGB[PC] / HDMI[PC] mode HDMI[DTV] mode Horizontal Vertical Horizontal Vertical Resolution Frequency(KHz) Frequency(Hz) Resolution Frequency(KHz) Frequency(Hz) 720x400 31.468 70.08 31.469 59.94 31.469 59.94 640x480 640x480 31.469 60.00 37.500 75.00 31.47 59.94 720x480 EXTERNAL EQUIPMENT SETUP 37.879 60.31 800x600 31.50 60.00 46.875 75.00 720x576 31.25 50.00 832x624 49.725 74.55 37.50 50.00 48.363 60.00 1280x720 44.96 59.94 1024x768 56.470 70.00 45.00 60.00 60.023 75.03 33.72 59.94 1280x768 47.693 59.99 33.75 60.00 1360x768 47.649 59.94 28.125 50.00 1920x1080 27.000 24.00 56.250 50.00 67.433 59.94 67.500 60.00

22 Screen Setup for PC mode

BACK MENU DVR Auto Configure (RGB [PC] mode only) EXIT GUIDE

Automatically adjusts picture position and minimizes image TIME OK TIME instability. SHIFT SHIFT After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. MARK FAV

VOL PR EXTERNAL EQUIPMENT SETUP

Auto configure

This function is for automatic adjustment of the screen posi- tion, clock, and phase. The displayed image will be unstable for a few seconds while the auto configuration is in progress.

SETUPO Auto Config. Manual Config. Press the MENU button and then use D or E button PICTUREO 1 AUDIOO XGA Mode Aspect Ratio to select the SCREEN menu. TIMEO Reset OPTIONO 2 Press the G button and then use D or E button to SCREEN G select Auto Config.. D V RO

G 3 Press the button to start Auto Config.. Move MENU Prev.

• When Auto Config. has finished, O K will be shown 1 on screen. • If the position of the image is still not correct, try

Auto adjustment again. Auto Config. G To Set Manual Config. XGA Mode • If picture needs to be adjusted again after Auto Aspect Ratio adjustment in RGB (PC), you can adjust the Manual Reset Config..

4 Press the EXIT button to return to normal TV viewing.

2 3

23 EXTERNAL EQUIPMENT SETUP

BACK MENU DVR EXIT GUIDE Adjustment for screen Phase, Clock, Position

TIME OK TIME SHIFT SHIFT If the picture is not clear after auto adjustment and espe- cially if characters are still trembling, adjust the picture

phase manually. MARK FAV VOL PR To correct the screen size, adjust Clock. EXTERNAL EQUIPMENT SETUP This function works in the following mode : RGB[PC].

Clock This function is to minimize any vertical bars or stripes SETUPO Auto Config. visible on the screen background the horizontal PICTUREO Manual Config. AUDIOO XGA Mode screen size will also change. Aspect Ratio TIMEO Reset OPTIONO Phase This function allows you to remove any horizontal SCREEN G noise and clear or sharpen the image of characters. D V RO

Move MENU Prev. 1

Auto Config. Manual Config. G Phase 0 XGA Mode Clock 0 Aspect Ratio H-Position 0 Reset 1 Press the MENU button and then use D or E button V-Position 0 to select the SCREEN menu.

2 Press the G button and then D or E button to select Manual Config..

3 Press the G button and then D or E button to select 2 3 4 Phase, Clock, H-Position or V-Position.

4 Press the F or G button to make appropriate adjust- ments.

5 Press the EXIT button to return to normal TV viewing.

24 Selecting Wide XGA mode BACK MENU DVR To view a normal picture, match the resolution of RGB EXIT GUIDE mode and selection of XGA mode

TIME OK TIME This function works in the following mode: RGB[PC] mode SHIFT SHIFT

MARK FAV VOL PR EXTERNAL EQUIPMENT SETUP

SETUPO Auto Config. Manual Config. Press the MENU button and then use D or E button PICTUREO 1 AUDIOO XGA Mode Aspect Ratio to select the SCREEN menu. TIMEO Reset OPTIONO 2 Press the G button and then use D or E button to SCREEN G select XGA Mode. D V RO

G D E 3 Press the button and then use or button to Move MENU Prev. select the desired XGA resolution. 1 4 Press the EXIT button to return to normal TV viewing.

Auto Config. Manual Config. XGA Mode G 1024 X 768 Aspect Ratio 1280 X 768 Reset 1360 X 768

2 3

25 EXTERNAL EQUIPMENT SETUP

BACK MENU DVR Initialising EXIT GUIDE (Reset to original factory settings) TIME OK TIME SHIFT SHIFT This function operates in current mode. To initialise the adjusted value MARK FAV VOL PR

MUTE

123 EXTERNAL EQUIPMENT SETUP 456

789 1 Press the MENU button and then D or E button to select the OPTION menu. LIST 0 Q.VIEW

2 Press the G button and then D or E button to select Factory Mode. SETUPO Language PICTUREO Country AUDIOO Lock System G D E Parental Control Press the button and then or button to select TIMEO 3 Input Label Factory Reset. OPTION G SIMPLINK SCREENO Factory Mode D V RO 4 Press the G button.

The message “If you enter a password, all user Move MENU Prev. setting will be reset” will appear. 1 5 Use NUMBER buttons to input a 4-digit password. The TV is set up with the initial password “0-0-0-0”. Language Set ID Country 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode G Normal Low Power Off

2

Language Set ID Country 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode Normal Low Power Off

3 4

26 WATCHING TV /PROGRAMME CONTROL

REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV.

INPUT MODE POWER Switches the TV on from standby or off to standby. D/A POWER TV D/A INPUT Selects digital or analogue mode. TV/RADIO DVD Switches the TV on from standby. INPUT BRIGHT VCR TV/RADIO Selects Radio or TV channel in digital mode.

SIMPLINK TEXT INFO i LIVE TV INPUT External input mode rotate in regular sequence. Switches the TV on from standby.

Brightness Adjusts screen brightness. WATCHING TV / PROGRAMME CONTROL adjustment This returns to the default settings brightness by changing mode source.

BACK MENU DVR EXIT GUIDE Coloured These buttons are used for teletext (on TELETEXT models) buttons or Programme edit.

TIME OK TIME SHIFT SHIFT EXIT Clears all on-screen displays and returns to TV viewing from any menu.

BACK Allows the user to move back one step in an interactive MARK application, EPG or other user interaction function. FAV VOL PR DVR Call up the Home menu.

MUTE MENU Selects a menu.

123 GUIDE Shows programme schedule.

456 VOLUME UP Adjusts the volume. 789 /DOWN

LIST 0 Q.VIEW FAV/MARK Displays the selected favourite programme. Check and un-check programmes in the recorded TV menu.

MUTE Switches the sound on or off. UPDATE INDEX TIME ? Programme Selects a programme. SLEEP HOLD REVEAL UP/DOWN SUBTITLE RATIO I/II 0~9 number Selects a programme. button Selects numbered items in a menu.

LIST Displays the programme table.

Q.VIEW Returns to the previously viewed programme.

27 WATCHING TV /PROGRAMME CONTROL

MODE Selects the remote operating modes.

See a list of AV devices connected to TV. INPUT MODE When you toggle this button, the Simplink menu appears D/A POWER TV at the screen.

TV/RADIO DVD 1 TELETEXT These buttons are used for teletext. INPUT BRIGHT BUTTONS For further details, see the ‘Teletext’ section. VCR Shows the present screen information. (In Digital Mode only) SIMPLINK TEXT INFO i LIVE TV INFO i 1 LIVE TV In Delayed mode, the screen returns to Live programme from DTV, TV, AV1, AV2 and AV3 modes.

WATCHING TV / PROGRAMME CONTROL DVR/VCR/DVD Controls video cassette recorders or DVD players when you select DVD or VCR mode button. control buttons Control connected AV devices by pressing the D or E or F or G, OK buttons and buttons for play, stop, pause, BACK MENU fast reverse, fast forward, chapter skip. DVR EXIT GUIDE (The button does not provide such functions.) Use for DVR record or trick play.

D E or Allows you to navigate the on-screen menus and adjust TIME OK TIME / SHIFT SHIFT F / G (TIME SHIFT) the system settings to your preference.

OK Accepts your selection or displays the current mode.

MARK FAV VOL PR SLEEP Sets the sleep timer.

SUBTITLE Recalls your preferred subtitle in digital mode. MUTE Selects your desired picture format. 123 RATIO Selects the sound output. 456 I/II

789 Installing Batteries LIST 0 Q.VIEW

1 UPDATE INDEX TIME ? SLEEP HOLD REVEAL

SUBTITLE RATIO I/II ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5V AA batteries. Do not mix old or used batteries with new ones. ■ Close cover.

28 TURNING ON THE TV - When your TV is turned on, you will be able to use its features.

INPUT MODE D/A POWER TV

Firstly, connect the power cord correctly. TV/RADIO DVD 1 INPUT BRIGHT At this stage, the TV switches to standby mode. VCR

SIMPLINK TEXT INFO i LIVE TV

2 In standby mode to turn TV on, press the r / I, INPUT or PR D or E button on the TV or press the POWER, INPUT, D/A, PR + or - or NUMBER button on the remote WATCHING TV / PROGRAMME CONTROL control and the TV will switch on. BACK MENU DVR EXIT GUIDE Initializing setup

If the OSD (On Screen Display) is displayed on the screen TIME OK TIME after turning on the TV, you can adjust the Language, Select SHIFT SHIFT Mode, Country, Time Zone, Auto programme tuning.

Note: MARK FAV a. It will automatically disappear after approx. 40 seconds VOL PR unless a button is pressed. b. Press the BACK button to change the current OSD to the previous OSD. MUTE c. For those countries without confirmed DTV broadcast- 123 ing standards, some DTV features might not work, depending on the DTV broadcasting environment. 456 d. "Home” mode is the optimal setting for home environ- 789 ments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environ- LIST 0 Q.VIEW ments.“ If a user modifies image quality data, “In Store” mode initializes the product to the image quality set by us after a certain period of time. UPDATE INDEX TIME f. The mode (Home, In Store) can be changed by execut- ? SLEEP HOLD REVEAL ing Factory Reset in the OPTION menu. SUBTITLE RATIO I/II

29 WATCHING TV /PROGRAMME CONTROL

PROGRAMME SELECTION

Press the PR + or - or NUMBER buttons to select a pro- 1 INPUT MODE gramme number. D/A POWER TV

TV/RADIO DVD INPUT BRIGHT VCR

SIMPLINK TEXT INFO i LIVE TV WATCHING TV / PROGRAMME CONTROL

BACK MENU DVR VOLUME ADJUSTMENT EXIT GUIDE

TIME OK TIME SHIFT SHIFT 1 Press the VOL + or - button to adjust the volume.

If you wish to switch the sound off, press the MUTE MARK FAV button. VOL PR

You can cancel this function by pressing the MUTE, MUTE VOL + or -, or I/II button. 123

456

789

LIST 0 Q.VIEW

UPDATE INDEX TIME

? SLEEP HOLD REVEAL

SUBTITLE RATIO I/II

30 ON SCREEN MENUS SELECTION AND ADJUSTMENT

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

1 Press the MENU button and then D or E button to display each menu.

2 Press the G button and then D or E button to select a menu item.

3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to a higher level menu by pressing the O K or MENU button.

SETUPG Auto Tuning SETUPO Picture Mode SETUPO Sound Mode PICTUREO Manual Tuning PICTURE G Colour Temperature PICTUREO Auto Volume

AUDIOO Programme Edit AUDIOO AUDIO G Balance 0 WATCHING TV / PROGRAMME CONTROL 5V Antenna Power Advanced TV Speaker TIMEO TIMEO TIMEO Booster Picture Reset Digital Audio Out OPTIONO Software Update OPTIONO Demo OPTIONO SCREENO Diagnostics SCREENO SCREENO D V RO CI Information D V RO D V RO

Move MENU Prev. Move MENU Prev. Move MENU Prev.

: This feature is not available * in all countries.

SETUPO Clock PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone OPTIONO SCREENO D V RO

Move MENU Prev.

SETUPO TimeShift Mode SETUPO Auto Config. SETUPO Language PICTUREO Record Quality PICTUREO Manual Config. PICTUREO Country AUDIOO Recorded TV AUDIOO XGA Mode AUDIOO Lock System Schedule List Aspect Ratio Parental Control TIMEO TIMEO TIMEO Manual Record Reset Input Label OPTIONO HDD Format OPTIONO OPTION G SIMPLINK SCREENO SCREEN G SCREENO Factory Mode D V R G D V RO D V RO

Move MENU Prev. Move MENU Prev. Move MENU Prev.

! NOTE

G In Analogue mode, 5V Antenna Power, Booster, Software Update, Diagnostics and C I Information will not be displayed. G When you play recorded programmes, some of SETUP functions are not activated.

31 WATCHING TV /PROGRAMME CONTROL

AUTO PROGRAMME TUNING BACK MENU DVR (IN DIGITAL MODE) EXIT GUIDE

Use this to automatically find and store all available programmes. TIME OK TIME SHIFT SHIFT When you start auto programming in digital mode, all previously stored service information will be deleted. MARK FAV It is not possible to use this function while recording a programme. VOL PR

SETUPG Auto Tuning Manual Tuning Press the MENU button and then D E button to PICTUREO WATCHING TV / PROGRAMME CONTROL 1 or AUDIOO Programme Edit 5V Antenna Power select the SETUP menu. TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information 2 Press the G button and then D or E button to select Auto Tuning.

Move MENU Prev. 1 3 Press the G button to begin auto tuning. Use NUMBER buttons to input a 4-digit password in

Lock System ‘O n’. Auto Tuning G Start Manual Tuning Programme Edit The message “All service-information will be 5V Antenna Power Booster updated. Continue?” will appear. Software Update Diagnostics CI Information

If you want to keep on auto tuning select YES with using the F or G button. Then, press the OK button. Otherwise select N O. 2

To stop auto tuning, press the MENU button. Auto Tuning

0 Programme(s) 0 Programme(s)

4 Press the EXIT button to return to normal TV viewing. UHF CH. 14 24 %

MENU Stop 3

32 MANUAL PROGRAMME TUNING BACK MENU DVR (IN DIGITAL MODE) EXIT GUIDE

Manual Tuning lets you manually add a programme to your programme TIME OK TIME list. SHIFT SHIFT

MARK FAV VOL PR

SETUPG Auto Tuning Manual Tuning Press the MENU button and then D E button to PICTUREO 1 or AUDIOO Programme Edit WATCHING TV / PROGRAMME CONTROL 5V Antenna Power select the SETUP menu. TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information 2 Press the G button and then D or E button to select Manual Tuning.

Move MENU Prev. 1 3 Press the G button and then D or E button or NUM- BER buttons to select the desired channel number.

Use NUMBER buttons to input a 4-digit password in Auto Tuning Lock System ‘O n’. Manual Tuning G Your receiver will Programme Edit add this channel to 5V Antenna Power your channel list. Booster Software Update UHF CH. 35 Press the OK button to save. Diagnostics 4 CI Information

When the channel number you want to add is already in the programme list, the message “Setup infor- 2 mation for the channel will be updated. Continue?” will appear.

Auto Tuning Manual Tuning Your receiver will Programme Edit add this channel to If you wish to continue manual tuning, select YES 5V Antenna Power your channel list. Booster D 35 using the F or G button. Software Update UHF CH E Diagnostics CI Information

Then, press the OK button. Otherwise select N O. Search 3 4 5 Press the EXIT button to return to normal TV viewing.

33 WATCHING TV /PROGRAMME CONTROL

PROGRAMME EDIT (IN DIGITAL MODE) BACK MENU DVR When a programme number is skipped, it means that you will be EXIT GUIDE unable to select it using PR + or - button during TV viewing.

TIME OK TIME If you wish to select the skipped programme, directly enter the pro- SHIFT SHIFT gramme number with the NUMBER buttons or select it in the Programme edit menu.

This function enables you to skip the stored programmes. MARK FAV VOL PR In some countries it is possible to move a programme number by using the YELLOW button only. MUTE

WATCHING TV / PROGRAMME CONTROL It is not possible to use this function while recording a programme. 123 456

789

1 Press the MENU button and then D or E button to LIST 0 Q.VIEW select the SETUP menu.

G D E G 2 Press the button and then or button to select SETUP Auto Tuning Programme Edit menu. PICTUREO Manual Tuning AUDIOO Programme Edit 5V Antenna Power TIMEO Booster OPTIONO Software Update Press the G button to enter the Programme Edit SCREENO Diagnostics 3 CI Information menu. D V RO Use NUMBER buttons to input a 4-digit password in

Lock System ‘O n’. Move MENU Prev. 1 4 Select a programme to be stored or skipped with the D or E or F or G button. Auto Tuning Manual Tuning Programme Edit G To Set 5V Antenna Power Booster 5 Press the BLUE button repeatedly to have the pro- Software Update gramme skipped or stored. Diagnostics CI Information

When programmes are to be skipped, skipped pro- gramme shows in blue and these programmes will not 2 3 be selected by the PR + or - buttons during TV view- ing.

6 Press the EXIT button to return to normal TV viewing.

34 Mini Glossary

Displayed with a DTV Programme. TEXT Displayed with a Teletext Programme. Displayed with a Locked Programme. Displayed with a Subtitle Programme. Displayed with a Radio Programme. Displayed with an Scramble Programme. Displayed with a MHEG Programme. Displayed with a Dolby Programme.

A Skipping a programme number

1 Select a programme number to be skipped with the D or E or F or G button.

2 Press the BLUE button. The skipped programme number turns to blue. WATCHING TV / PROGRAMME CONTROL

3 Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR + or - but- ton during normal TV viewing.

If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.

4 Press the EXIT button to return to TV viewing.

A Locking a programme (In Lock System On mode only)

1 Select a programme to be locked with the D or E or F or G button.

2 Press the GREEN button. The lock symbol will appear in front of that programme number.

3 Press the GREEN button again to release this function.

Note : G To watch a locked programme, input a 4-digit password in Lock system. Be sure to remember this number! G If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset. G If you select another programme after releasing a locked programme and then return to the locked programme within 1 minute, there is no need to input a password to select the locked programme.

A Selecting favourite programme

1 Select your favourite programme number by pressing D or E or F or G button and then press the FAV but- ton on your remote control handset.

It will automatically include the selected programme into your favourite programme list.

35 WATCHING TV /PROGRAMME CONTROL

5V ANTENNA POWER BACK MENU DVR (IN DIGITAL MODE ONLY) EXIT GUIDE

Even if there is not a special 5V adapter power in the exter- TIME OK TIME nal antenna, this function can output 5V in the TV. SHIFT SHIFT

MARK FAV 1 Press the MENU button and then D or E button to VOL PR select the SETUP menu.

2 Press the G button and then use D or E button to SETUPG 5V Antenna Power Auto Tuning select . PICTUREO Manual Tuning

WATCHING TV / PROGRAMME CONTROL AUDIOO Programme Edit 5V Antenna Power TIMEO 3 Press the G button and then use D or E button to Booster select O n or Off. OPTIONO Software Update SCREENO Diagnostics D V RO CI Information In 5V Antenna Power On, if the TV is overloaded (short circuits), it will automatically return to Off. Move MENU Prev. The message “Antenna feed overloaded. 1 Automatically switched off.” will appear.

4 Press the EXIT button to return to normal TV viewing. Auto Tuning Manual Tuning Programme Edit 5V Antenna Power G Off Booster On Software Update Diagnostics CI Information BOOSTER (IN DIGITAL MODE ONLY)

If reception is poor select Booster to On. If TV signal is strong, select Booster to Off. 2 3

Auto Tuning Manual Tuning Programme Edit D E 1 Press the MENU button and then or button to 5V Antenna Power select the SETUP menu. Booster G Off Software Update On Diagnostics CI Information 2 Press the G button and then use D or E button to select Booster.

3 Press the G button and then use D or E button to select O n or Off. 2 3

4 Press the EXIT button to return to normal TV viewing.

36 SOFTWARE UPDATE BACK MENU DVR (IN DIGITAL MODE ONLY) EXIT GUIDE Software Update means software can be downloaded through TIME OK TIME the digital terrestrial broadcasting system. SHIFT SHIFT After a Software Update, HDD formatting may be necessary. In this case, the HDD Failure message is displayed in the DVR

Home menu. MARK FAV VOL PR 1 Press the MENU button and then D or E button to select the SETUP menu.

G Press the G button and then D E button to select SETUP Auto Tuning 2 or PICTUREO Manual Tuning

Software update. AUDIOO Programme Edit WATCHING TV / PROGRAMME CONTROL 5V Antenna Power TIMEO Booster Press the G button and then D or E button to select OPTIONO Software Update 3 SCREENO Diagnostics Off or O n. D V RO CI Information

• If you select O n, a user confirm message box will be

displayed to notify that new software is found. Move MENU Prev. 1 4 Press the EXIT button to return to normal TV viewing.

Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Booster Software Update G Off Diagnostics On * When setting “Software Update” CI Information

Occasionally, a transmis- sion of updated digital software information will 2 3 result in the following menu on the TV screen.

- During Progress of a Software Update, please note the following: Select YES using the F or G button and you will • Power to the TV must not be interrupted. • The TV must not be switched off. see the following picture. • The antenna must not be disconnected. • During this time, you should not switch off the power to the TV. • At this time, you should not work power On/Off. After the Software Update • After Software Update, you can confirm the is complete, the System updated software version in Diagnostics menu. takes about one minute to • OTA cannot be performed while the DVR restart. function(recording, playback) is running.

37 WATCHING TV /PROGRAMME CONTROL

DIAGNOSTICS BACK MENU DVR (IN DIGITAL MODE ONLY) EXIT GUIDE

This function enables you to view information on the TIME OK TIME Manufacturer, Model/Type, Serial Number and Software SHIFT SHIFT Version.

This displays the information and signal strength of the MARK FAV tuned MUX. VOL PR This displays the signal information and service name of the selected MUX. WATCHING TV / PROGRAMME CONTROL

SETUPG Auto Tuning Press the MENU button and then D or E button to PICTUREO Manual Tuning 1 AUDIOO Programme Edit 5V Antenna Power select the SETUP menu. TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information 2 Press the G button and then use D or E button to select Diagnostics.

Move MENU Prev.

3 Press the G button to display Manufacturer, 1 Model/Type, Serial Number and Software Version.

Auto Tuning Press the EXIT button to return to normal TV viewing. Manual Tuning 4 Programme Edit 5V Antenna Power Booster Software Update Diagnostics G To Set CI Information

2

Engineeringi DiagnosticsChannel 30 Manufacturer : LG Electronics Inc. Model / TypeTransmitter : 37LC2D-EC : Teracom_Mux_2 Serial No.Signal : 604KG0000006 strength 53% Software version : 1.1.0 Signal quality 100% CH 30 CH 34 1 YLE PEU 1 YLE TV1 3 YLE TV2 4 YLEQ 5 YLE FST 6 YLEN KLASS 7 YLE FSR+ 8 YLE24

Menu Prev. SelectBack 3

38 CI [COMMON INTERFACE] INFORMATION BACK MENU DVR (IN DIGITAL MODE ONLY) EXIT GUIDE

This function enables you to watch some scrambled services (pay ser- TIME OK TIME vices). If you remove the CI Module, you cannot watch pay services. SHIFT SHIFT When the module is inserted into the CI slot, you can access the module menu.

To purchase a module and smart card, contact your dealer. Do not repeat- MARK edly insert or remove a CAM module from the TV. This may cause a mal- FAV function. When the TV is turned on after inserting a CI Module, you may VOL PR not have any sound output.

This may be incompatible with the CI module and smart card.

CI (Common Interface) functions may not be possible depending upon WATCHING TV / PROGRAMME CONTROL the country broadcasting circumstances.

SETUPG Auto Tuning Press the MENU button and then D or E button to PICTUREO Manual Tuning 1 AUDIOO Programme Edit 5V Antenna Power select the SETUP menu. TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information 2 Press the G button and then D or E button to select CI Information.

Move MENU Prev. 1 3 Press the G button and then OK button.

4 Press the D or E button to select the desired item: Auto Tuning Manual Tuning Module information, smart card information, lan- Programme Edit guage, or software download etc. 5V Antenna Power Booster Software Update Diagnostics CI Information G Module 5 Press the OK button.

6 Press the EXIT button to return to normal TV viewing. 2 3

• This OSD is only for illustration and the menu Viaccess Module options and screen format will vary according to Consultations the Digital pay services provider. Authorizations • It is possible for you to change CI (Common Module information Interface) menu screen and service by consulting your dealer. Select the item 4 5

39 WATCHING TV /PROGRAMME CONTROL

BACK MENU DVR AUTO PROGRAMME TUNING EXIT GUIDE (IN ANALOGUE MODE) TIME OK TIME SHIFT SHIFT All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of

this TV. MARK FAV It is not possible to use this function while recording a pro- VOL PR gramme. MUTE

123

456 D E 1 Press the MENU button and then or button to 789 WATCHING TV / PROGRAMME CONTROL select the SETUP menu. LIST 0 Q.VIEW 2 Press the G button and then D or E button to select Auto Tuning. 3 Press the G button to select System. Select a TV system with the F or G button; SETUPG Auto Tuning PICTUREO Manual Tuning Programme Edit L : SECAM L/L’ (France) AUDIOO TIMEO B G : PAL B/G, SECAM B/G (Europe / East Europe / OPTIONO Asia / New Zealand / M.East / Africa / Australia) SCREENO I : PAL I/II (U.K. / Ireland / Hong Kong / South D V RO Africa) D K : PAL D/K, SECAM D/K (East Europe / China /

Africa / CIS) Move MENU Prev. 4 Press the E button to select Storage From. 1 Select the initial programme number with the F or G button or NUMBER buttons on the Storage From menu. Auto Tuning G System BG Manual Tuning Storage From 2 Programme Edit 5 Press the E button to select Start. Start The station name is stored for stations which broad- cast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data.

If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number. 2 3 4 5

To stop auto tuning, press the MENU button.

When auto tuning is complete, the Programme Edit menu appears on the screen.

See the ‘Programme Edit’ section to edit the stored programme.

40 BACK MENU DVR MANUAL PROGRAMME TUNING EXIT GUIDE (IN ANALOGUE MODE) TIME OK TIME SHIFT SHIFT Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.

MARK It is not possible to use this function with TimeShift Mode On. FAV VOL PR It is not possible to use this function while recording a pro- gramme. MUTE 123

456 Press the MENU button and then D or E button to 1 789 select the SETUP menu. WATCHING TV / PROGRAMME CONTROL

LIST 0 Q.VIEW 2 Press the G button and then D or E button to select Manual Tuning. 3 Press the G button to select Storage. SETUPG Auto Tuning Select the desired programme number with the F or G PICTUREO Manual Tuning button or NUMBER buttons on the Storage menu. AUDIOO Programme Edit TIMEO Press the E button to select System. Select a TV OPTIONO 4 SCREENO system with the F G button; or D V RO L : SECAM L/L’ (France) B G : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) Move MENU Prev. I : PAL I/II (U.K. / Ireland / Hong Kong / South 1 Africa) D K : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) Auto Tuning Storage 1 Press the E button to select Band. Press the F or G Manual Tuning G System BG 5 Programme Edit button to select V/UHF or Cable as required. Band V/UHF Channel 1 6 Press the E button to select Channel. You can Fine select the desired channel number with the F or G Search Name button or NUMBER buttons. C 01

If possible, select the channel number directly with the NUMBER buttons. 2 3 4 5 7 Press the E button to select Search. Press the F or 6 7 8 G button to commence searching. If a station is 9 found the search will stop. 8 Press the OK button to store settings. 9 To store another station, repeat steps 3 to 8. 10 Press the EXIT button to return to normal TV viewing.

41 WATCHING TV /PROGRAMME CONTROL

FINE TUNING (IN ANALOGUE MODE) BACK MENU DVR Normally fine tuning is only necessary if reception is poor. EXIT GUIDE

TIME OK TIME SHIFT SHIFT

1 Press the MENU button and then D or E button to MARK select the SETUP menu. FAV VOL PR 2 Press the G button and then D or E button to select Manual Tuning.

3 Press the G button and then D or E button to select SETUPG Auto Tuning Fine. PICTUREO Manual Tuning WATCHING TV / PROGRAMME CONTROL AUDIOO Programme Edit TIMEO Press the G button and then F G button to fine 4 or OPTIONO tune for the best picture and sound. SCREENO D V RO 5 Press the OK button to store settings. Press the EXIT button to return to normal TV viewing. 6 Move MENU Prev. 1

ASSIGNING A STATION NAME Auto Tuning Storage 1 Manual Tuning System BG Programme Edit Band V/UHF (IN ANALOGUE MODE) Channel 1 Fine FG You can assign a station name to each programme number. Search Name C 01

Store 1 Press the MENU button and then D or E button to select the SETUP menu. 2 3 4 5

2 Press the G button and then D or E button to select Manual Tuning. Auto Tuning Storage 1 Manual Tuning System BG G D E Programme Edit 3 Press the button and then or button to select Band V/UHF Name. Channel 1 Fine 4 Press the G button and then D or E button. You can Search use the alphabet A to Z, numbers 0 to 9, +/ -, and Name FGD C 01 blank. E

5 Press the F or G button to select the position and make your choice of the second character, and so on. 2 3 4 5 6 6 Press the OK button to store settings. 7 Press the EXIT button to return to normal TV viewing.

42 PROGRAMME EDIT (IN ANALOGUE MODE) BACK MENU DVR This function enables you to delete or skip stored programmes. You EXIT GUIDE can also move some programmes to other programme numbers or copy blank programme data into a selected programme number. TIME OK TIME SHIFT SHIFT It is not possible to use this function while recording a programme.

SETUPG Auto Tuning Press the MENU button and then D or E button to PICTUREO Manual Tuning

1 Programme Edit WATCHING TV / PROGRAMME CONTROL select the SETUP menu. AUDIOO TIMEO OPTIONO 2 Press the G button and then D or E button to select SCREENO Programme Edit. D V RO

3 Press the G button to display the Programme Edit menu. Move MENU Prev. 1 A Deleting a programme

a Select a programme to be deleted with the D or E or Auto Tuning F or G button. Manual Tuning Programme Edit G To Set b Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position.

A Copying a programme 2 a Select a programme to be copied with the D or E or F or G button.

b Press the GREEN button. All the following programmes are shifted down one position.

43 WATCHING TV /PROGRAMME CONTROL

MARK FAV VOL PR

MUTE BACK MENU DVR 123 EXIT GUIDE 456

TIME OK TIME 789 SHIFT SHIFT

LIST 0 Q.VIEW

A Moving a programme WATCHING TV / PROGRAMME CONTROL

a Select a programme to be moved with D or E or F or G button. b Press the YELLOW button.

c Move the programme to the desired programme number with the D or E or F or G button.

d Press the YELLOW button again to release this function.

A Skipping a programme number

a Select a programme number to be skipped with D or E or F or G button.

b Press the BLUE button. The skipped programme number turns to blue.

c Press the BLUE button to release the skipped programme.

d When a programme number is skipped it means that you will be unable to select it using the PR + or - button during normal TV viewing.

If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.

A Selecting a Favourite Programme

a Select your favourite programme number with D or E or F or G button.

b Press the FAV button.

The selected programme will be added to the favourite programme list.

44 EXIT GUIDE

TIME OK TIME SELECTING THE PROGRAMME TABLE SHIFT SHIFT

MARK You can check which programmes are stored in the memory FAV by displaying the programme table. VOL PR U

123

456

789

LIST 0 Q.VIEW

A Displaying programme LIST WATCHING TV / PROGRAMME CONTROL

1 Press the LIST button to display the PROGRAMME DTV List LIST menu. D 801 YLE TV1 The programme list appears on the screen. 802 YLE TV2 803 YLE FST • You may find some blue programmes. 804 YLE24 These have been set up to be skipped by auto 805 YLE Teema

programming or in the programme edit mode. 806 TV4 • Some programmes with the channel number shown in the programme LIST indicate there is no station < In Digital Mode > name assigned.

A Selecting a programme in the programme list Programme List

0 BBC1 D E 1 Select a programme with the or button. 1C 01 2 Press the OK button. The TV switches to the chosen pro- 2C 04 gramme number. 3C 05 4 BLN 2

5 C 05 A Paging through a programme list < In Analogue Mode > Programme LIST pages contain 100 programmes in total. 1 Press the D or E button repeatedly to turns the pages. 2 Press the LIST button to return to normal TV viewing.

A Displaying the favourite programme table Mini Glossary

Displayed when the Press the FAV button to display the Favourite Locked Programme. Programme table menu.

45 WATCHING TV /PROGRAMME CONTROL

INPUT SOURCE SELECTION BACK MENU DVR Selects a label for each input source which is not in use. EXIT GUIDE

TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR WATCHING TV / PROGRAMME CONTROL

SETUPO Language PICTUREO Country 1 Press the MENU button and then use D or E button AUDIOO Lock System Parental Control TIMEO to select the OPTION menu. Input Label OPTION G SIMPLINK SCREENO Factory Mode D V RO 2 Press the G button and then use D or E button to

select Input Label. Move MENU Prev. 1

3 Press the G button and then use D or E button to select the source: AV1, AV2, AV3, Comp., RGB, HDMI1, HDMI2 or HDMI3. Language AV1 Country AV2 Lock System AV3 Parental Control Input Label G Comp. SIMPLINK RGB 4 Press the F or G button to select the label. Factory Mode HDMI1 HDMI2 HDMI3

5 Press EXIT button to return to normal TV viewing. 2 3 4

46 BACK MENU FUNCTION DVR EXIT GUIDE

This fundtion operates only with devices with the SIMPLINK logo. TIME OK TIME Please check the SIMPLINK logo. SHIFT SHIFT

This TV might not function properly when using it with other prod- ucts with HDMI-CEC function. MARK FAV VOL PR This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.

If you require the SIMPLINK menu, select “O n”. WATCHING TV / PROGRAMME CONTROL

SIMPLINK function is not supported by HDMI IN 3 input. SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label Press the MENU button and then D or E button to OPTION G SIMPLINK 1 SCREENO Factory Mode select the OPTION menu. D V RO

2 Press the G button and then D or E button to select Move MENU Prev. SIMPLINK. 1

3 Press the G button and then D or E button to select Language Off or O n. Country Lock System Parental Control Input Label Press the EXIT button to return to normal TV viewing. SIMPLINK G Off 4 Factory Mode On

2 3

47 WATCHING TV /PROGRAMME CONTROL SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK, , , , , , and buttons. Direct play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out.

WATCHING TV / PROGRAMME CONTROL * A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.

SIMPLINK Menu

Press the D or E or F or G button and then OK button to select the desired SIMPLINK source.

1 TV viewing : Switch to the previous TV programme regardless of the current mode.

2 DISC playback : Select and play connected discs. 1 When multiple discs are available, the titles of discs are 2 Selected Device conveniently displayed at the bottom of the screen.

3 VCR playback : control the connected 3 When no device is connect- VCR. ed (displayed in gray) 4 4 HDD Recordings playback : control recordings stored in HDD. 5 When a device is connected (displayed in bright colour) 5 Audio Out to Home theatre/Audio Out to TV: Select Home theatre or TV speaker for Audio Out.

! NOTE G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN ter- minal on the back of the SIMPLINK device with the OPTICAL cable. G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the remote control. G When you switch the Input source using the INPUT button on the remote control, you can stop the opera- tion of a device controlled by SIMPLINK. G When you select or operate a media device with home theatre function, the speaker automatically switches to home theatre speaker (HT speaker). G If SIMPLINK is operated, the keys such as stop / play / pause / fast reverse / fast forward / chapter skip are used for driving the SIMPLINK device, but are not used for the DVR feature.

48 DVR (DIGITAL VIDEO RECORDER)

TIMESHIFT MODE (PAUSE & REPLAY OF LIVE TV) BACK MENU DVR EXIT GUIDE This function allows the unit to automatically record live TV and make it available for viewing at any time. TIME OK TIME SHIFT SHIFT With the TimeShift Mode turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast. MARK FAV (TimeShift Mode and Recording functions may not work if the VOL PR signal strength is weak.)

SETUPO TimeShift Mode PICTUREO Record Quality D E Recorded TV 1 Press the MENU button and then use / button AUDIOO Schedule List TIMEO to select the DVR menu. Manual Record OPTIONO HDD Format

SCREENO DVR (DIGITAL VIDEO RECORDER) D V R G 2 Press the G button and then use D / E button to select the TimeShift Mode. Move MENU Prev.

1 3 Press the G button and then use D / E button to select On or Off. TimeShift Mode G Off Record Quality On Recorded TV Schedule List Manual Record 4 Press the EXIT button to return to normal TV viewing. HDD Format

2 3

49 DVR (DIGITAL VIDEO RECORDER)

Using the TimeShift Mode function

LIVE

1 2 3 4

The ‘Progress Bar’? 1 After selecting TimeShift Mode On, press the OK button. This function indicates what DVR reviewing is pos- sible,a current on-screen and live broadcasting ■ As soon as TimeShift Mode starts, a progress bar indicat- position. ing the current recording status is displayed in the bot- tom of the screen. 1 Status of current displayed video. ■ Press the EXIT button to hide the ‘Progress Bar’ or press 2 Current save time. 3 15 minute intervals from TimeShift Mode start DVR (DIGITAL VIDEO RECORDER) the OK button to display the 'Progress Bar'. time. (Total - one hour). ■ This function is preserved even when changing a pro- 4 Indicates current TimeShift Mode position. gramme or progressing the TimeShift Mode.

2 When finishinging with the TimeShift Mode function, enter the option menu and turn TimeShift Mode Off.

! NOTE

DVR (Digital Video Recorder) : A device which then restored in the digital signal. The unit will records and plays broadcast programme contents attempt to reduce excessive picture interference. onto a hard disk in TV or SET TOP BOX. TimeShift Mode is available in DTV, TV, AV1, The total storage space of the hard-disk is 160 GB. AV2, AV3 mode. 4 GB minimum is reserved for TimeShift Mode. TimeShift Mode is available for Audio only channels. When turning power on, it may take up to a maxi- When pressing the Pause(I I) button in TimeShift mum of 3 minutes to initialise the HDD. Off mode, TimeShift starts. TimeShift remains active The Recording function will not initiate for a even when you change channels. copy-protected programme. In the case of DTV, the maximum DTV recording Because an analogue broadcast is converted to a duration displayed as Free space may be slightly digital signal, video which contains rapid move- different from the actual maximum recording ment may show "cross stripes". This happens duration. when the analogue signal is compressed and

50 VCR

SIMPLINK TEXT INFO i LIVE TV Using the TimeShift Mode function, play

When in TimeShift Mode, the following options are available.

DELAYED BACK MENU DVR EXIT GUIDE Indicates that the current broadcast and displayed video differ.

TIME OK TIME SHIFT SHIFT

Play Pause MARK Using the remote control You can shift playback to any point within the recorded programme.

When playing, DVR (DIGITAL VIDEO RECORDER) repeatedly, press the REW(FF) button to speed up F -> FF -> FFF -> FFFF -> FFFFF . FF or GG repeatedly, press the F F(GG) button to speed up GG-> GGG -> GGGG -> GGGGG . ■ Pressing these buttons repeatedly increases the fast forward/reverse speed.

Press the GGI button to jump about 20 seconds forward. IFF or GGI ■ Press the IFF button to jump about 8 seconds back.

During playback, press the Pause(I I) button. ■ Still screen is displayed. I I ■ Repetedly press the Pause(I I) button to advance frame by frame.

■ Press the Pause(I I) button and then use the FF(GG) button for slow motion (the icon is displayed.)

F or G ■ When using the F or G button during playback a cursor indicating the position can be viewed on the screen.

PLAY(G) Press the PLAY(G) button to return to normal playback.

LIVE TV If you want to return to the current live broadcast, press the LIVE TV button.

51 DVR (DIGITAL VIDEO RECORDER)

INSTANT RECORDING Use this function to record the programme you are watching on the main screen (Analogue or Digital broadcast).

Instant Record This function records the currently displayed programme.

1 Select the programme you wish to record and then press the O button. During recording REC is displayed. Use this feature to record up to 2 hours of programming.

A DVR (DIGITAL VIDEO RECORDER) 2 If you wish to stop recording, press the button.

■ While recording, if you press the A button before 10 seconds of recording time has passed, this message is displayed. Recording failed. Length is less than 10 seconds. ■ While Audio recording, if you press the A button before 30 seconds of recording time has passed, this message is dis- Recording failed. played. Length is less than 30 seconds.

■ If you press the A button after more than 10 seconds of recording time has passed, this message is displayed. Recording completed.

3 You can increase or decrease the recording time by pressing the O button while recording. After pressing the O button, press the F or G buttons repeatedly to increase or decrease the recording time. Each time you press F or G button the recording duration changes as shown below.

+10min -> +20min -> +30min -> +40min -> +50min -> +60min No Change

-10min -> -20min -> -30min -> -40min -> -50min -> -60min

52 The extra recording time added to the existing setting Recording Options equals the final recording time. Cricket World Cup 23:57 23:40~00:40 Recording time 4 After adjusting the recording time, select OK. The Status 23:54~01:55 (2 min recorded) bar will be displayed. Set duration F No change G Total recording duration OK Cancel

REC 0:00:00 / 2:00:00 3 Elapsed recording time

■ Press the EXIT button to hide the Status bar. Press the OK button to display the Status bar. DVR (DIGITAL VIDEO RECORDER) 5 Recording stops when the selected duration is reached or when you press the A button. Although recording has stopped, the TimeShift Mode feature remains active.

53 DVR (DIGITAL VIDEO RECORDER)

! NOTE When recording, if the available storage space is viewing the SCART Auto AV, but the Analog TV not sufficient, the recording will automatically source is recorded while viewing the Analog TV Stop. source. When reserved recording is performed, even if the channel is set to the Analog TV, if the In Radio mode, recordings of less than 30 sec- Scart Auto AV operates, the Auto AV source is onds will not be saved. In other modes, record- recorded. ings of less than 10 seconds will not be saved. When the programme switch key is pressed while No data will be saved on paid channels with no recording the Analog TV source, the channel is CI Card or expired period of validity of CI Card, switched to the Digital TV source. However, when in invalid services and in data only channels (ex. the numeric key is pressed, it is not switched. MHEG) In order to save disk space. The maximum schedule recording duration is 12 The recording function will not initiate for a hours. The maximum number of schedule record- copy-protected programme. ing is 60 in the UK and 30 in the rest of the The displayed time differs slightly from the actu- world. al time. When Manual Recording, the default sound settings When there is no signal or a film source is being apply. viewed, the displayed time may differ slightly When the recording time conflicts with that of from the actual time. existing recordings, the Collision message is dis- DVR (DIGITAL VIDEO RECORDER) Recording is not possible with copy-protected played in a Popup window in the UK and record- programmes. ing is not registered in the rest of the world. ■ When Instant Recording, this message is dis- When recording a DTV source, you cannot watch played. Scrambled channels (paid channel). When you choose an scrambled channel (paid Cannot record due to copy protection. channel), the following message is displayed. Cannot watch a scrambled programme. ■ When Manual Recording, this message is dis- while recording another DTV programme. played. When you change channels while recording an Analog TV source, the channel will be switched Schedule recording cannot start. to the DTV mode. Copy protected. Broadcast materials are protected by copyright and that recording and playback of certain mate- When a poor quality external source is recorded rial would only be permissible by permission of (for example old VHS tape) the quality of the the copyright owner. Audio and video recordings recording will not be optimal. you make using this recorder are for your per- Programmes are stored separately according to sonal use only. You may not sell, lend or rent the colour system used. e.g. PAL/NTSC. them to other people. Recording is based on the currently being viewed source. The Auto AV source is recorded while

54 MANUAL RECORDING BACK MENU DVR EXIT GUIDE This function is used to perform reserved recording.

TIME OK TIME This function is available in the DVR menu. SHIFT SHIFT

When Manual Recording,the default sound of the TV is stored. MARK FAV VOL PR

Home 1 Press the DVR button to display Home menu. Use the Free Space D or E button to select the Manual Record and then use the O K or G button. Recorded TV

Programme Guide

2 The Manual Record screen is displayed as shown below. Schedule List DVR (DIGITAL VIDEO RECORDER) Use the D or E or F or G button to set the Input, Manual Record Programme, Date, Start/End, Repeat. TV Menu

1 Input : Select the input source from the DTV, RADIO, TV, AV1, AV2, AV3. Programme : Select either the current programme or a scanned programme. Date : You can select a date up to one month in advance. Start/End : Ensure you have set these correctly. Repeat : Choose either Once, Daily, Weekly, Weekend, Weekday.

3 After setting the Manual Record , press the O K button.

Button Function in Manual Record Mode

Remote Control Buttons Function Manual Record D E Fri Mar 30 10:24 or Select required items with Up/down button. Input Programme Date Start End Repeat F or G Selects the required fields. DTV 1 BBC ONE Fri Mar 30 10:26 10:56 Once

EXIT OSD disappears. Navigation Modify Enter Cancel Exit Exit Displays the reservation list after the recording has been registered. 2

55 DVR (DIGITAL VIDEO RECORDER)

RECORDED TV PROGRAMME LIST BACK MENU DVR You can view the recorded programme list at a glance. EXIT GUIDE This function is also available in the DVR menu. Information function is only applicable when the country selected is UK. TIME OK TIME SHIFT SHIFT 1 Press the DVR button to display HOME menu. D E Use the or button to select Recorded TV and then use MARK the OK or G button. FAV VOL PR

Recorded TV Home Input : DTV 1 Date : Fri Mar 30 2007 Free Space Duration : 30m Quality : High Free Space

23h 01m Page 3/27 0 Marked 3h 01m Recorded TV To Buy or Not to Buy Fri Mar 30 10:49

In the Night Garden Fri Mar 30 10:36 Programme Guide Schools : Primary Geog Fri Mar 30 10:36 Schedule List Class TV : Revisewise Fri Mar 30 10:21 DVR (DIGITAL VIDEO RECORDER) Manual Record 30 Jahre ‘68 : Revolte Fri Mar 30 10:20

TV Menu INFO Information EXIT Exit Popup MenuPR Move Page MARK Mark 1

When the highlighted recording is a locked programme or a Recorded TV 2 Input : DTV 1 rated programme, the preview window displays ‘LOCKED SERVICE’ LOCKED Date : Fri Mar 30 2007 SERVICE Duration : 30m Quality : High instead of the Play screen. Free Space 23h 01m Page 3/27 0 Marked 3h 01m If you wish to play locked or rated recordings, you must enter To Buy or Not to Buy Fri Mar 30 10:49 the password. In the Night GardenEnter Password Fri Mar 30 10:36 Schools : Primary Geog- - Fri- - Mar 30 10:36 Class TV : Revisewise Fri Mar 30 10:21

30 Jahre ‘68 : Revolte Fri Mar 30 10:20

INFOInformation EXIT Exit Popup Menu PR Move Page MARK Mark 2 In the case of recording an Audio only programme the preview Recorded TV Input : DTV 1 3 Date : Fri Mar 30 2007 AUDIO ONLY window displays ‘AUDIO ONLY’ instead of the Play screen. Duration : 30m Quality : High Free Space

23h 01m Page 3/27 0 Marked 3h 01m To Buy or Not to Buy Fri Mar 30 10:49

In the Night Garden Fri Mar 30 10:36

Schools : Primary Geog Fri Mar 30 10:36

Class TV : Revisewise Fri Mar 30 10:21

30 Jahre ‘68 : Revolte Fri Mar 30 10:20

INFOInformation EXIT Exit Popup MenuPR Move Page MARK Mark 3

When scheduled recording fails for various reasons such as Recorded TV 4 Input : DTV 1 signal strength, it is registered in the Recorded TV List and Date : Fri Mar 30 2007 Duration : 30m the Preview window displays the OSD as shown in the diagram. Quality : High Free Space When you press the OK button to execute the failed recording, 23h 01m Page 3/27 0 Marked 3h 01m a message is displayed as shown in the picture. To Buy or Not to Buy Fri Mar 30 10:49 In the Night GardenSchedule recording Fri Marfailed 30 10:36 due to no signal. Schools : PrimaryDo Geog you want Fri to delete? Mar 30 10:36

Class TV : RevisewiseYES FriNO Mar 30 10:21

30 Jahre ‘68 : Revolte Fri Mar 30 10:20

INFOInformation EXIT Exit Popup MenuPR Move Page MARK Mark 56 3 BACK MENU DVR EXIT GUIDE Recorded programme Selection and Popup Menu TIME OK TIME SHIFT SHIFT The preview recorded list is shown above.

MARK FAV VOL PR

Recorded TV

Input : DTV 1 Date : Fri Mar 30 2007 Duration : 30m Quality : High 1 Use the PR + or PR - button for page up/down navigation. Free Space 23h 01m Page 3/27 0 Marked 3h 01m To Buy or Not to Buy Fri Mar 30 10:49

In the Night Garden Fri Mar 30 10:36

Schools : Primary Geog Fri Mar 30 10:36

Class TV : Revisewise Fri Mar 30 10:21

30 Jahre ‘68 : Revolte Fri Mar 30 10:20 2 Use the MARK button to delete from the list. A is dis- DVR (DIGITAL VIDEO RECORDER) INFOInformation EXIT Exit played next to the preview window if an item is marked. Popup MenuPR Move Page MARK Mark 1

Recorded TV

Input : DTV 1 Date : Fri Mar 30 2007 Duration : 30m Quality : High Free Space D E 23h 01m Page 3/27 0 Marked 3 Use or button to navigate the appropriate thumbnail 3h 01m DTV 1 To Buy or Not to Buy 10:49~11:19 10:49

Play photo, then press the OK button to open the Pop-up In the Night Garden 10:36 Mark All Menu. Schools : Primary Geog Delete 10:36 Rename 10:21 Class TV : Revisewise Cancel

30 Jahre ‘68 : Revolte Fri Mar 30 10:20 Play : Begin playback of the selected recording.

INFOInformation EXIT Exit Mark All : mark all recordings on the screen. Popup MenuPR Move Page MARK Mark 2 Unmark All : Change marked recordings to unmarked recordings. Recorded TV

Delete : Delete the selected recording. Input : DTV 1 Date : Fri Mar 30 2007 Rename : Edit the recorded programme title. Duration : 30m Quality : High Free Space

Cancel : Close the Pop-up Menu. 23h 01m Page 3/27 0 Marked 3h 01m DTV 1 To Buy or Not to Buy 10:49~11:19 10:49 Play In the Night Garden Mark All 10:36 Delete Schools : Primary Geog 10:36 Rename

Class TV : Revisewise Cancel 10:21

30 Jahre ‘68 : Revolte Fri Mar 30 10:20 EXIT Repeatedly, press the button to return to TV viewing INFO EXIT 4 Information Exit or press the DVR button to return to the Home menu. Popup MenuPR Move Page MARK Mark 3

■ If the HDD has a problem performing a recording related HDD initialisation in progress. function, this message is displayed. Please try again later.

■ If the temperature is below zero (0°), a warning message is Low temperature. displayed and you will not be able to use the DVR functions. DVR initialisation cannot start.

4

57 DVR (DIGITAL VIDEO RECORDER)

Playing recorded programmes - You can play a selected programme from the recorded programme list.

The ‘Progress Bar’? Play a recorded programme. This function indicates what DVR 1 reviewing is possible ,a current on- screen and live broadcasting position, a 2 While playing, You will see a playback screen as shown below. section of section-recording. 1 Indicates progress of recorded ■ Initially, an icon showing the current playback mode is displayed programme. PLAYING . Press the OK button to display the progress bar 2 Indicates status of recorded programme. ■ To stop displaying the recorded programmes icon, press the EXIT button. 3 Indicates elapsed playback time. 4 Indicates total playback time. 5 Indicates a quarter of programme runtime. PLAYING 6 Indicates current playback position.

1 2 3 4 5 6

DVR (DIGITAL VIDEO RECORDER) Using the remote control You can shift playback to any point within the recorded programme.

When playing, repeatedly, press the REW(FF) button to speed up F -> FF -> FFF -> FFFF FFFFF FF or GG -> . repeatedly, press the F F(GG) button to speed up GG-> GGG -> GGGG -> GGGGG . ■ Pressing these buttons repeatedly increases the fast forward/reverse speed.

Press the GGI button to jump about 20 seconds forward. IFF or GGI ■ Press the IFF button to jump about 8 seconds back.

During playback, press the Pause(I I) button. ■ Still screen is displayed. I I ■ Repetedly press the Pause(I I) button to advance frame by frame.

■ Press the Pause(I I) button and then use the FF(GG) button for slow motion (as showing the .)

■ F G F or G When using the or button during playback the cursor can be viewed on the screen.

PLAY(G) Press the PLAY(G) button to return to normal playback.

LIVE TV If you want to return to the current live broadcast, press the LIVE TV button.

A ■ If you press the STOP(A) button, you can view live TV.

58 Chase playback During recording, you can “Trick play” a programme that is being recorded without interrupting recording by using the Progress Bar. The ‘Progress Bar’? Record a programme. This function indicates what DVR 1 reviewing is possible ,a current on- screen and live broadcasting position, a 2 While recording, You will see a playback screen as shown below. section of section-recording. 1 Indicates progress of recorded ■ Initially, an icon showing the current playback mode is displayed programme. REC . Press the OK button to display the progress bar 2 Indicates status of recording programme. ■ To stop displaying the recorded programmes icon, press the EXIT button. 3 Indicates elapsed recording time. 4 Indicates total recording time. 5 Indicates a quarter of programme runtime. REC 6 Indicates current playback position.

1 2 3 4 5 6

Using the remote control DVR (DIGITAL VIDEO RECORDER) You can shift playback to any point while recording programme.

When playing, repeatedly, press the REW(FF) button to speed up F -> FF -> FFF -> FFFF FFFFF FF or GG -> . repeatedly, press the F F(GG) button to speed up GG-> GGG -> GGGG -> GGGGG . ■ Pressing these buttons repeatedly increases the fast forward/reverse speed.

Press the GGI button to jump about 20 seconds forward. IFF or GGI ■ Press the IFF button to jump about 8 seconds back.

During recording, press the Pause(I I) button. ■ Still screen is displayed. I I ■ Repetedly press the Pause(I I) button to advance frame by frame.

■ Press the Pause(I I) button and then use the FF(GG) button for slow motion (as showing the .)

■ F G F or G When using the or button during recording the cursor can be viewed on the screen.

PLAY(G) Press the PLAY(G) button to return to normal playback.

LIVE TV If you want to return to the current live broadcast, press the LIVE TV button.

A ■ If you press the STOP(A) button, you can view live TV.

59 DVR (DIGITAL VIDEO RECORDER)

BACK MENU DVR SCHEDULE LIST EXIT GUIDE This function is used to show scheduled recordings.

This function is available in the DVR menu. TIME OK TIME SHIFT SHIFT You can store up to 30 programmes. 60 programmes can be stored in the United Kingdom.

MARK FAV

Home Free Space 1 Press the DVR button to display Home menu. Use the D or E button to select the Schedule List and then use the OK or G button. Recorded TV Programme Guide Schedule List 2 The Schedule List screen is displayed as shown below. Manual Record

DVR (DIGITAL VIDEO RECORDER) Use the D or E button to select a recorded programme. TV Menu

1 Button Function in Schedule List Mode

Remote Control Buttons Function Schedule List D E This is BBC THREE Mon Mar 26 15:47 or Select programmes Up/down. DTV 7 BBC THREE Display Popup window Sun Apr 01 16:48~17:18 (30min) Page 1/1 Title Programme Date Start Repeat EXIT OSD disappears. No titleTV 1 C 01 Wed Mar 28 15:18 Once This is BBC THREEDTV 7 BBC THREE Sun Apr 01 16:48 Weekly YELLOW Enter Manual record mode. BLUE Change to Guide mode. PR D or E Page Up/Down

PR Move Page Popup Menu Exit Exit In UK, this function is available for use in the Overall Schedule mode. Manual Record Guide 2 Popup Menu Function Schedule List

Modify Modify to the Schedule Recording. This is BBC THREE Mon Mar 26 15:47 DTV 7 BBC THREE Delete Delete Schedule Recording. Sun Apr 01 16:48~17:18 (30min) Page 1/1 Delete All Delete All Schedule Recording. Title Programme Date Start Repeat No titleTV 1 C 01 Wed Mar 28 15:18 Once Cancel Delete Popup window. This is BBC THREEDTV 7 BBC THREE Sun Apr 01 16:48 Weekly Modify Delete Delete All Cancel

PR Move Page Popup Menu Exit Exit Manual Record Guide The contents below are only applicable when country selected is the UK.

Remote Control Buttons Function Schedule List Catch me if you can Sat. Oct 30 19:10 RED Select Overall Schedule/Weekly Schedule in turn. 027 Discovery Channel Wed Oct 17 18:20 - 21:20 Series Record Recommended Page 1/1

INFO i Detail information on or off. Overall Schedule The Lord of the Rings Tue. Feb 13 13:00 Catch me if you can Tue. Feb 13 15:12 TV 11 DiscoveryRTime Wed. Feb 14 5:34 TV 1BBC (Weekdays) Wed. Feb 14 6:00 Ally Mcbeal (Weekends) Thu. Feb 15 7:35 DTV 4 Bloomberg (Weekly) Fri. Feb 16 15:21 Royal Ceremony Fri. Feb 16 22:00

PR Move Page INFO Information Popup Menu 60 Weekly Schedule Manual Record Guide RECORD QUALITY BACK MENU DVR This function is not available while a recording is taking place. EXIT GUIDE (Only for analogue schedule recording)

TIME OK TIME SHIFT SHIFT

MARK FAV DVR (DIGITAL VIDEO RECORDER)

SETUPO TimeShift Mode PICTUREO Record Quality Press the MENU button and then use D / E button AUDIOO Recorded TV 1 Schedule List TIMEO to select the DVR menu. Manual Record OPTIONO HDD Format SCREENO D V R G 2 Press the G button and then use D / E button to select Record Quality.

Move MENU Prev. 3 Press the G button and then use D / E button to 1 select High or Normal. TimeShift Mode Record Quality G High Recorded TV Normal Schedule List Press the EXIT button to return to normal TV viewing. Manual Record 4 HDD Format Only for analogue schedule recording (TV, AV1, AV2, AV3).

2 3

61 DVR (DIGITAL VIDEO RECORDER)

FORMAT HARD DISK BACK MENU DVR Erases all programmes and initialises the hard drive. EXIT GUIDE

TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR DVR (DIGITAL VIDEO RECORDER)

SETUPO TimeShift Mode Press the MENU button and then use D / E button to PICTUREO Record Quality 1 AUDIOO Recorded TV select the DVR menu. Schedule List TIMEO Manual Record OPTIONO HDD Format SCREENO Press the G button and then use D / E button to select 2 D V R G HDD Format.

3 Press the G button to start HDD Format. Move MENU Prev. 1

■ if you press the G button, this message is displayed. TimeShift Mode Record Quality Recorded TV Do you want to format HDD? Schedule List Yes No Manual Record HDD Format G To set

■if you select Yes, this message is displayed.

HDD format in progress.

2 3 ■When completing, this message is displayed.

HDD initialisation successful.

4 Press the EXIT button to return to normal TV viewing.

62 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)

This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for next 8 days.

Switch on/off EPG

1 Press the GUIDE button to switch on EPG. 2 Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.

Select a programme

Programme Guide EPG (ELECTRONIC PROGRAMME GUIDE) 1 BBC ONE 08:25 26 Mar 1 Press the D or E, F or G, PR + or - button to DTV 08:00 26 Mar 08:30 09:00 select the desired programme, then the OK button, 1 BBC ONE Breakfast Don’... the popup window to select the function is displayed. 2 BBC TWO Cramp... Chuck... To... Number ja... Nina a... Lu... 7 BBC THREE This is BBC THREE

70 CBBC Channel Dogstar Young Dracula Class TV:... CI... 80 BBC NEWS 24 Breakfast BBC News BBC News

105 BBCi BBCi

TV/RADIO Radio Popup Record Information Mode Date Manual Record Schedule List Button Function in NOW/NEXT Guide Mode

Remote Control Buttons Function Programme Guide 1 BBC ONE 08:25 26 Mar RED Change EPG mode DTV NOW NEXT YELLOW Enter Manual Record setting mode 1 BBC ONE Breakfast Don’t Get Done Get Dom BLUE Enter Schedule list mode 2 BBC TWO ChuckleVision Tommy Zoom 7 BBC THREE This is BBC THREE This is BBC THREE Display Popup window 70 CBBC Channel Dogstar Young Dracula F or G Select NOW or NEXT Programme 80 BBC NEWS 24 Breakfast BBC News D or E Select the Broadcast Programme 105 BBCi BBCi BBCi PR + or - Page Up/Down GUIDE/EXIT Switch off EPG TV/RADIO Radio Popup Record Information Mode Manual Record Schedule List TV/RADIO Select TV or RADIO Programme INFO i Detail information on or off. RECORD Select Record/delete the highlighted programme in turn. FAV Select the Favourite programme/all Programmes in turn.

63 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)

Button Function in 8 Days Guide Mode

Programme Guide Remote Control Buttons Function 1 BBC ONE 08:25 26 Mar RED Change EPG mode DTV 08:00 26 Mar 08:30 09:00 GREEN Enter Date setting mode 1 BBC ONE Breakfast Don’... 2 BBC TWO ...... YELLOW Enter Manual Record setting mode Cramp Chuck To Number ja Nina a Lu 7 BBC THREE This is BBC THREE BLUE Enter Schedule list mode 70 CBBC Channel Dogstar Young Dracula Class TV:... CI... Display Popup window 80 BBC NEWS 24 Breakfast BBC News BBC News F or G Select NOW or NEXT Programme 105 BBCi BBCi D or E Select the Broadcast Programme TV/RADIO Radio Popup Record Information PR + or - Page Up/Down Mode Date Manual Record Schedule List GUIDE/EXIT Switch off EPG TV/RADIO Select TV or RADIO Programme INFO i Detail information on or off. FAV Select the Favourite programme/all Programmes in turn. FF Move to the left every one and a half hours. GG Move to the right every one and a half hours. IFF Turn to the left every six hours. GGI Turn to the right every six hours. EPG (ELECTRONIC PROGRAMME GUIDE) RECORD Select Record/delete the highlighted programme in turn.

Icon Function Recording (Blue colour) Reminder (Red colour) Schedule Recording

The contents below are only applicable when country selected is the UK.

Remote Control Buttons Function Programme Guide RECORD Select Schedule Recording/Schedule 1 BBC ONE 10:28 30 Mar DTV 10:30 30 Mar 11:00 11:30 Recording Series/highlighted programmes in turn. 1 BBC ONE REC Escape t... To Buy or... Car Booty 2 BBC TWO Icon Function Schools: Primary Geography Sc... School... 5 Five Trisha Goddard Five News

Recording 7 BBC THREE This is BBC THREE (Red colour) Record Single Episode 15 abc1 8 Simple Rules Home Improvem... Home Improv... Record Single Episode Conflict 16 QVC Silver Day Silver Day 17 UKTV Gold Closedown Record Series TV/RADIO Radio Popup Record Information Record Series Conflict Mode Date Manual Record Schedule List (Blue colour) Reminder

64 Button Function in Date Change Mode

Remote Control Buttons Function Programme Guide 1 BBC ONE 08:25 26 Mar GREEN Switch off Date setting mode Today 08:00 26 Mar 08:30 09:00 Change to the selected date 1 BBC ONE Breakfast Don’... F or G Select a date 2 BBC TWO Cramp... Chuck... To... Number ja... Nina a... Lu... E Switch off Date setting mode 7 BBC THREE This is BBC THREE 70 CBBC Channel Dogstar Young Dracula Class TV:... CI... GUIDE/EXIT Switch off EPG 80 BBC NEWS 24 Breakfast BBC News BBC News

105 BBCi BBCi

Date Change Date Exit

Button Function in Extended Description Box EPG (ELECTRONIC PROGRAMME GUIDE) Information Remote Control Buttons Function 1 BBC ONE 10:31 30 Mar D E Text Up/Down To Buy or Not to buy or 11:00 11:30 30 Mar

INFO i Detail information on or off. Presenters Sarah Walker and Simon Rimmer are looking for a house in GUIDE/EXIT Switch off EPG Cheshire for a couple with a growing family. [S] YELLOW Enter Manual Record setting mode. BLUE Enter schedule list mode.

Record Info. Exit

Manual Record Schedule List

The contents below are only applicable when country selected is the UK. * Recommended : Recommended programmes which are related to selected programmes

Remote Control Buttons Function Information 261 EIT 1 13:02 2 Apr With a recommended programme in place, News Update the display shows a pop-up of record setting 13:05 ~ 13:07 2 Apr which helps you set up or delete a Latest breaking news stories from around the world. Recommended Timer Record Series/Record Single Episode. D or E Recommended programme Up/Down. Recommended programmes Weather DTV261 EIT 1 Series

Popup Record Info. Exit Manual Record Schedule List

65 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)

Record Popup

* You can set up and activate the Record Series only when the country is set to the UK. * You cannot activate a reminder during power off mode. Remote Control Buttons Function Programme Guide 1 BBC ONE 10:45 30 Mar EXIT/BACK Delete the pop-up. DTV 10 09:00 To Buy or Not to Buy D E Move the highlighted field. Don’... or 1BBC ONE DTV1 BBC ONE Fri. 30 Mar 11:00~11:30 Follow the order of functions of the selected 2 BBC TWO Cr ina a... Lu... Record series 7 BBC THREE button. Record programme 70 CBBC Channel Set reminder ass TV:... CI... 80 BBC NEWS 24 Cancel BBC News Popup Menu Function 105 BBCi Record series Set up Record Series operation for TV/RADIO Radio Popup Record Information

selected programme. Mode Date Manual Record Schedule List Record programme Set up Record Programme operation for selected programme. Watch this pro. Move to selected channel. Set reminder When the selected programme is not broadcasted, set up Schedule Recording operation. Delete this Delete Recording or Reminder mode. Delete series Delete series Recording mode Cancel Delete the pop-up. EPG (ELECTRONIC PROGRAMME GUIDE)

When the current channel being viewed is different from When the next timer recording is scheduled to start before the scheduled recording channel, a message as shown the end of a programme being recorder a message as shown below will appear on the screen 1 minute before the below will appear on the screen one minute before the scheduled recording. scheduled start time of the next recording (UK Only)

A Recording is scheduled, Schedule Overlap the channel will change Schedule recording will start in a few minutes. in 1 minute. Continue? EVENT 7 3 Channel 3 Thu Oct 12 13:10~13:14

Current schedule recording will stop to record this.

REC EVENT 10 4 Channel 4 Thu Oct 12 13:07~13:12 YES NO OK No

Conflict pop-up * The contents below are only applicable when country selected is the UK.

Remote Control Buttons Function Schedule Overlap

EXIT Delete the pop-up. The Weakest Link 2 BBC TWO Fri Mar 23 17:15~18:00

F or G Move the highlighted field. To schedule this, some timer changes are needed. D or E List of conflicts. Gina’s Laughing Gear 1 BBC ONE Fri Mar 23 17:00~17:30 When you press the OK button it is possible -> Gina’s Laughing Gear 70 CBBC Channel Sat Mar 24 18:30~18:58 to delete the conflicts or to switch the mode OK No to rerun and set up the Record operation. When you press the NO button, you can delete the Recording pop-up.

66 PICTURE CONTROL

EXIT GUIDE

TIME OK TIME PICTURE SIZE (ASPECT RATIO) CONTROL SHIFT SHIFT

You can watch the screen in various picture formats; 16:9, Original, 4:3, 14:9 and Zoom1/2. MARK FAV VOL PR If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. MUTE 123 D E You can adjust the enlarge proportion using or button. 456

789 This function works in the following signal. LIST 0 Q.VIEW

UPDATE INDEX TIME

? SLEEP HOLD REVEAL

SUBTITLE RATIO I/II

1 Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the SCREEN menu. PICTURE CONTROL

• 16:9 • Original The following selection will allow you to adjust the pic- When your TV receives a wide screen signal it will auto- ture horizontally, in linear proportion, to fill the entire matically change to the picture format broadcast. screen(useful for viewing 4:3 formatted DVDs).

16:9 Original

67 PICTURE CONTROL

• 4:3 • Zoom1 The following selection will allow you to view a picture The following selection will allow you to view with an original 4:3 aspect ration, grey bars will appear the picture without any alteration, while filling on both the left and right of the screen. the entire screen. However, the top and bot- tom of the picture will be cropped.

4:3

Zoom1 DE

• 14:9 Zoom2 You can view a picture format of 14:9 or a general TV • programme in the 14:9 mode. The 14:9 screen is Choose Zoom 2 when you wish the picture to viewed in the same way as in 4:3, but is magnified to be altered, both horizontally extended and the left and right. vertically cropped. The picture adopting a compromise between alteration and screen coverage. PICTURE CONTROL

14:9 DE

Zoom2 DE

! NOTE G You can only select 16:9 (Wide), 4:3, Zoom 1/2 in Component, HDMI mode. G You can only select 16:9 (Wide), 4:3, in RGB mode only. G You can only select 16:9 (Wide), 4:3, 14:9, Zoom 1/2 in a delayed mode and during the playback of recordings of TV, AV1, AV2 and AV3 input. G Aspect ratio control of the delayed mode and the playback is managed separately with the normal input mode.

68 PRESET PICTURE SETTINGS BACK MENU DVR EXIT GUIDE Picture Mode-Preset TIME OK TIME SHIFT SHIFT Vivid Select this option to display a sharp image. Standard The most general and natural screen display sta- tus. MARK FAV Cinema Select this option to display a mild image. VOL PR User 1/2 Select this option to use a user defined setting.

SETUPO Picture Mode G Colour Temperature Press the MENU button and then D or E button to PICTURE 1 AUDIOO Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO Demo 2 Press the G button and then D or E button to select SCREENO Picture Mode. D V RO

G D E Press the button and then or button to select Move MENU Prev. 3 PICTURE CONTROL Vivid, Standard, Cinema, User 1, or User 2. 1 4 Press the EXIT button to return to normal TV viewing.

Picture Mode adjusts the TV for the best picture Picture Mode G Vivid appearance. Select the preset value in the Picture Colour Temperature Standard Cinema Mode menu based on the programme category. Advanced User 1 Picture Reset User 2 Demo Vivid, Standard and Cinema are programmed for optimum picture reproduction at the factory and cannot be changed.

2 3

69 PICTURE CONTROL

Auto Colour Tone Control (Warm/Medium/Cool) BACK MENU DVR To initialise values (reset to default settings), select the EXIT GUIDE Cool option.

TIME OK TIME SHIFT SHIFT Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool

to see less intense colours with more blue. MARK FAV VOL PR This menu is activated after selecting User1 or User2 in the Picture Mode.

SETUPO Picture Mode G Colour Temperature 1 Press the MENU button and then D or E button to PICTURE AUDIOO Advanced select the PICTURE menu. TIMEO Picture Reset OPTIONO Demo SCREENO D V RO 2 Press the G button and then D or E button to select Colour Temperature.

Move MENU Prev. PICTURE CONTROL

3 Press the G button and then D or E button to select 1 either Cool, Medium, Warm, or User.

Picture Mode Colour Temperature G Cool 4 Press the EXIT button to return to normal TV viewing. Medium Advanced Warm Picture Reset User Demo

2 3

70 MANUAL PICTURE ADJUSTMENT BACK MENU DVR EXIT GUIDE Picture Mode-User option

TIME OK TIME Contrast Adjusts the difference between light and dark SHIFT SHIFT levels in the picture.

Brightness Increases or decreases the amount of white in MARK the picture. FAV VOL PR Colour Adjusts intensity of all colours. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.

Tint Adjusts the balance between red and green lev- SETUPO Picture Mode els. PICTURE G Colour Temperature AUDIOO Advanced TIMEO Picture Reset OPTIONO Demo SCREENO 1 Press the MENU button and then D or E button to select D V RO the PICTURE menu.

Move MENU Prev. 1 Press the G button and then D or E button to select

2 PICTURE CONTROL Picture Mode.

Picture Mode G Vivid Colour Temperature Standard Cinema 3 Press the G button and then D or E button to select User Advanced User 1 Picture Reset User 2 1 or User 2. Demo

4 Press the G button and then D or E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness and Tint). 2 3

5 Press the F or G button to make appropriate adjustments. User 1 Contrast 100 G Brightness 45 Colour 50 Sharpness 50 6 Press the EXIT button to return to normal TV viewing. Tint 0 RG

! NOTE 4 5 G You cannot adjust colour, sharpness and tint in the RGB- PC mode.

71 PICTURE CONTROL

BACK MENU DVR Colour Tone - User option EXIT GUIDE

TIME OK TIME SHIFT SHIFT To adjust red, green, blue to any colour temperature you prefer.

MARK FAV VOL PR

SETUPO Picture Mode PICTURE G Colour Temperature AUDIOO Advanced D E TIMEO 1 Press the MENU button and then or button to select Picture Reset the PICTURE menu. OPTIONO Demo SCREENO D V RO

Press the G button and then D E button to select 2 or Move MENU Prev. Colour Temperature. 1 PICTURE CONTROL

3 Press the G button and then D or E button to select User. Picture Mode Colour Temperature G Cool Medium Advanced Warm Press the G button and then D E button to select Red, Picture Reset User 4 or Demo Green or Blue.

5 Press the F or G button to make appropriate adjustments. 2 3

6 Press the EXIT button to return to normal TV viewing. User

Red 40 G Green 0 Blue 0

4 5

72 XD - PICTURE IMPROVEMENT TECHNOLOGY BACK MENU DVR XD is LG electronic's unique picture improving technology to EXIT GUIDE display a real HD source through an advanced digital signal pro- cessing algorithm. TIME OK TIME SHIFT SHIFT It is not possible to use this function in RGB-PC mode.

MARK FAV 1 Press the MENU button and then D or E button to select VOL PR the PICTURE menu.

2 Press the G button and then D or E button to select X D. SETUPO Picture Mode PICTURE G Colour Temperature AUDIOO Advanced TIMEO 3 Press the G button and then D or E button to select Picture Reset OPTIONO Demo Auto or Manual. SCREENO D V RO 4 Press the EXIT button to return to normal TV viewing.

Move MENU Prev. 1 * Manual Selection

This menu is activated after selecting the User1 or User2 of Picture PICTURE CONTROL Picture Mode Auto Mode. Colour Temperature Manual G XD Contrast Advanced On Picture Reset 1 Press the G button and then D or E button to select X D Demo XD Colour Contrast, XD Colour, XD NR or MPEG NR. On XD NR Low 2 Press the G button and then D or E button to select O n MPEG NR 0 or Off. 2 3 Press the EXIT button to return to normal TV viewing.

Picture Mode Auto Colour Temperature A XD Contrast : Optimises the contrast automatically Manual G XD Contrast Advanced according to the brightness of the reflection. On Picture Reset A XD Colour : Adjusts the colour of the reflection auto- Demo XD Colour matically to reproduce as close as possible natural On XD NR colours. Low A XD NR : Removes interference up to the point where it MPEG NR 0 does not damage the original picture. A MPEG NR : Reduces interference which may appear on 3 the screen while watching TV.

73 PICTURE CONTROL

DEMO BACK MENU DVR EXIT GUIDE Use it to see the difference between XD Demo on and XD Demo off. TIME OK TIME SHIFT SHIFT It is not possible to use this function in RGB[PC],HDMI[PC] mode. MARK FAV VOL PR

SETUPO Picture Mode PICTURE G Colour Temperature D E 1 Press the MENU button and then or button to select AUDIOO Advanced the PICTURE menu. TIMEO Picture Reset OPTIONO Demo SCREENO D V RO 2 Press the MENU button and then D or E button to select XD Demo. Move MENU Prev. 1 3 Press the G button to begin XD Demo. PICTURE CONTROL

Picture Mode Colour Temperature To stop XD Demo, press the MENU or EXIT button. 4 Advanced Picture Reset Demo G To Start

2 3

• XD Demo

XD™ Off XD™ On

Menu Exit

74 ADVANCED - CINEMA BACK MENU DVR EXIT GUIDE To set the TV up for the best picture quality for viewing films. TIME OK TIME SHIFT SHIFT This feature operates only in TV, AV, S-Video and Component 480i/576i mode. MARK FAV It is not possible to use this function while playing a VOL PR recorded programme.

SETUPO Picture Mode PICTURE G Colour Temperature MENU D E AUDIOO 1 Press the button and then or button to select Advanced TIMEO Picture Reset the PICTURE menu. OPTIONO Demo SCREENO D V RO

Press the G button and then D or E button to select Advanced. 2 Move MENU Prev. 1

G D E 3 Press the button and then or button to select Cinema. PICTURE CONTROL Picture Mode Colour Temperature

Advanced G Cinema Picture Reset Off Demo 4 Press the G button and then F or G button to select On or Off. Black Level Low

EXIT 5 Press the button to return to normal TV viewing. 2

Picture Mode Colour Temperature

Advanced Cinema Picture Reset F G On Demo Black Level Low

3

75 PICTURE CONTROL

ADVANCED - BLACK(DARKNESS) LEVEL BACK MENU DVR EXIT GUIDE When you view a film this function adjusts the TV to best picture quality. Adjusting the contrast and the brightness of the screen TIME OK TIME using the black level of the screen. SHIFT SHIFT

This function works in the following mode: AV (NTSC-M), S- Video (NTSC-M) or HDMI. MARK FAV VOL PR It is not possible to use this function while playing a recorded programme

SETUPO Picture Mode PICTURE G Colour Temperature D E Press the MENU button and then or button to select AUDIOO 1 Advanced the PICTURE menu. TIMEO Picture Reset OPTIONO Demo SCREENO D V RO 2 Press the G button and then D or E button to select Advanced. Move MENU Prev. 1 3 Press the G button and then D or E button to select Black

PICTURE CONTROL Level. Picture Mode Colour Temperature

Advanced G Cinema Press the G button and then F or G button to select Low Picture Reset Off 4 Demo or High. Black Level Low

A Low : The black level of the screen gets darker. A High : The black level of the screen gets brighter. 2

5 Press the EXIT button to return to normal TV viewing. Picture Mode Colour Temperature

Advanced Cinema Picture Reset Off Demo Black Level F G Low

3 4

76 PICTURE RESET BACK MENU DVR EXIT GUIDE Returns to the default factory setting for Picture Mode, Colour, Temperature, XD and Advanced. TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR

SETUPO Picture Mode PICTURE G Colour Temperature D E 1 Press the MENU button and then or button to select AUDIOO Advanced PICTURE TIMEO the menu. Picture Reset OPTIONO Demo SCREENO D V RO 2 Press the G button and then D or E button to select Picture Reset. Move MENU Prev. 1 3 Press the G button to initialise the adjusted value. PICTURE CONTROL

Picture Mode Colour Temperature

Advanced Picture Reset G To Set Demo

2 3

77 PICTURE CONTROL

IMAGE STICKING MINIMIZATION (ISM) BACK MENU DVR METHOD EXIT GUIDE

A frozen or still picture from a PC/Video game displayed on TIME OK TIME the screen for prolonged periods will result in a ghost image SHIFT SHIFT remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. MARK FAV White wash VOL PR White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Orbiter Input Label OPTION G SIMPLINK Orbiter may help prevent ghost images. However, it is best SCREENO Factory Mode not to allow any fixed image to remain on the screen. To D V RO avoid a permanent image on the screen, the screen will move every 2 minutes. Move MENU Prev.

Inversion 1 This function inverts the panel colour of the screen. The

PICTURE CONTROL panel colour is automatically inverted every 30 minutes. Language Set ID Country 1 Lock System Factory Reset Parental Control Input Label OK SIMPLINK ISM Method Factory Mode G Normal Low Power Off

1 Press the MENU button and then D or E button to select the OPTION menu. 2

2 Press the G button and then D or E button to select Factory Mode. Language Set ID Country 1 Lock System Factory Reset Press the G button and then D or E button to select Parental Control 3 Input Label OK ISM Method. SIMPLINK ISM Method Factory Mode F G Normal Press the G button and then D or E button to select Low Power 4 Off either Normal, Orbiter, White wash or Inversion. If you do not need this function, set Normal.

5 Press the EXIT button to return to normal TV viewing. 3 4

78 LOW-POWER PICTURE MODE BACK MENU DVR This function allows you to reduce the power consumption of EXIT GUIDE the TV.

TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR

SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label 1 Press the MENU button and then D or E button to OPTION G SIMPLINK select the OPTION menu. SCREENO Factory Mode D V RO 2 Press the G button and then D or E button to select Factory Mode. Move MENU Prev. 1 3 Press the G button and then D or E button to select Low Power.

4 Press the G button and then F or G button to select Language Set ID Country 1 Off or O n. Lock System PICTURE CONTROL Factory Reset Parental Control Input Label OK 5 Press the EXIT button to return to normal TV viewing. SIMPLINK ISM Method Factory Mode G Normal Low Power Off

2

Language Set ID Country 1 Lock System Factory Reset Parental Control OK Input Label SIMPLINK ISM Method Factory Mode Normal Low Power F G On

3 4

! NOTE G The default factory setting complies with the Energy star requirements and the Low Power is set to O n, making it suitable to be viewed at home. You can increase the brightness of your screen by setting the Low Power to Off or by setting the Picture Mode. 79 SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER BACK MENU DVR EXIT GUIDE

AVL automatically remains on the same level of volume if TIME OK TIME you change programmes. SHIFT SHIFT

MARK FAV VOL PR

SETUPO Sound Mode Auto Volume Press the MENU button and then D E button to PICTUREO 1 or AUDIO G Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO Press the G button and then D or E button to select SCREENO 2 D V RO Auto Volume.

G D E 3 Press the button and then or button to select Move MENU Prev. Off or O n. 1 4 Press the EXIT button to return to normal TV viewing.

Sound Mode Auto Volume G Off Balance 0 On TV Speaker

SOUND & LANGUAGE CONTROL Digital Audio Out

2 3

80 PRESET SOUND SETTINGS-SOUND MODE BACK MENU DVR EXIT GUIDE You can select your preferred sound setting; Surround MAX, Standard, Music, Cinema or Sport and you can also adjust the TIME OK TIME frequency of the equalizer. SHIFT SHIFT

Sound Mode lets you enjoy the best sound without any Special MARK adjustment as the TV sets the appropriate sound options based FAV on the programme content. VOL PR

Surround MAX, Standard, Music, Cinema and Sport are preset for optimum sound quality at the factory and are not SETUPO Sound Mode adjustable. PICTUREO Auto Volume AUDIO G Balance 0 TV Speaker TIMEO Digital Audio Out Surround MAX Select this option for the most realistic sound. OPTIONO SCREENO Standard Commanding and natural audio. D V RO Music Select this option to enjoy the original sound when listening to music. Cinema Select this option to enjoy sublime sound. Move MENU Prev. Sport Select this option to watch sports broadcasting. 1 User Select this option for user-defined audio settings.

Sound Mode G Surround MAX Auto Volume Standard Balance 0 Music TV Speaker Cinema

Digital Audio Out Sport SOUND & LANGUAGE CONTROL User 1 Press the MENU button and then D or E button to select the AUDIO menu.

2 3 2 Press the G button and then D or E button to select Sound Mode.

3 Press the G button and then D or E button to select Surround MAX, Standard, Music, Cinema, Sport or User.

4 Press the EXIT button to return to normal TV viewing.

81 SOUND & LANGUAGE CONTROL

SOUND SETTING ADJUSTMENT -USER MODE BACK MENU DVR EXIT GUIDE Adjusting the audio equalizer.

TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR

SETUPO Sound Mode PICTUREO Auto Volume D E Press the MENU button and then or button to select AUDIO G Balance 0 1 TV Speaker AUDIO TIMEO the menu. Digital Audio Out OPTIONO SCREENO D V RO 2 Press the G button and then D or E button to select Sound Mode. Move MENU Prev. 1 3 Press the G button and then D or E button to select User.

Sound Mode G Surround MAX Auto Volume Standard G Balance 0 Music 4 Press the button. TV Speaker Cinema

SOUND & LANGUAGE CONTROL Digital Audio Out Sport User

5 Select a frequency band by pressing the F or G button. Set the desired sound level with the D or E button.

2 3 6 Press the EXIT button to return to normal TV viewing.

User

120Hz FG 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz

4 5

82 BALANCE BACK MENU DVR EXIT GUIDE You can adjust the sound balance of the speakers to preferred levels. TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR

SETUPO Sound Mode Auto Volume Press the MENU button and then D E button to PICTUREO 1 or AUDIO G Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO Press the G button and then D or E button to select SCREENO 2 D V RO Balance.

G F G 3 Press the button and then or button to make Move MENU Prev. desired adjustment. 1 4 Press the EXIT button to return to normal TV viewing.

Sound Mode SOUND & LANGUAGE CONTROL Auto Volume Balance 0 G LR TV Speaker Digital Audio Out

2 3

83 SOUND & LANGUAGE CONTROL

TV SPEAKERS ON/ OFF SETUP BACK MENU DVR EXIT GUIDE

You can adjust the internal speaker status. TIME OK TIME SHIFT SHIFT In AV1, AV2, AV3, COMPONENT, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. MARK FAV VOL PR If you wish to use an external hi-fi system, turn off the TV internal speakers.

SETUPO Sound Mode Press the MENU button and then D or E button to PICTUREO Auto Volume 1 AUDIO G Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO 2 Press the G button and then D or E button to select SCREENO TV Speaker. D V RO

G D E 3 Press the button and then or button to select Move MENU Prev. Off or O n. 1 4 Press the EXIT button to return to normal TV viewing.

SOUND & LANGUAGE CONTROL Sound Mode Auto Volume Balance 0 TV Speaker G Off Digital Audio Out On

2 3

84 SELECTING DIGITAL AUDIO OUT BACK MENU DVR EXIT GUIDE

This function allows you to select your preferred Digital Audio Output. TIME OK TIME SHIFT SHIFT The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital Audio.

When Dolby digital is available, selecting Dolby Digital in the MARK Digital Audio Out menu will set SPDIF output to Dolby Digital. FAV If Dolby Digital is selected in the digital audio out menu VOL PR when dolby digital is not available, SPDIF output will be PCM. Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played. This function is not displayed in the Analogue mode. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D sym- bol are trademarks of Dolby Laboratories.

SETUPO Sound Mode Press the MENU button and then D or E button to PICTUREO Auto Volume 1 AUDIO G Balance 0 TV Speaker select the AUDIO menu. TIMEO Digital Audio Out OPTIONO 2 Press the G button and then D or E button to select SCREENO Digital Audio Out. D V RO

G D E SOUND & LANGUAGE CONTROL 3 Press the button and then or button to select Move MENU Prev. Dolby Digital or PCM. 1 4 Press the EXIT button to return to normal TV viewing.

Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out G Dolby Digital PCM

2 3

85 SOUND & LANGUAGE CONTROL

I/II

Stereo/Dual Reception (In Analogue Mode Only)

When a programme is selected, the sound information for the station appears after the programme number and station name disappear.

Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I

A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I/I I button twice.

A Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.

DUAL I Sends the primary broadcast language to the loudspeakers. DUAL II Sends the secondary broadcast language to the loudspeakers. DUAL I+II Sends a separate language to each loudspeaker. SOUND & LANGUAGE CONTROL

86 NICAM Reception (In Analogue Mode Only)

If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.

Sound output can be selected according to the type of broadcast received by pressing the I/II button repeatedly.

1 When NICAM mono is received, you can select NICAM MONO or FM MONO.

2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.

3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO.

Speaker Sound Output Selection SOUND & LANGUAGE CONTROL

In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.

Repeatedly press the I/II button to select the sound output.

L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers.

87 SOUND & LANGUAGE CONTROL

INPUT MODE ON-SCREEN MENU LANGUAGE / D/A POWER TV TV/RADIO DVD INPUT BRIGHT COUNTRY SELECTION VCR

The installation guide menu appears on the TV screen when it SIMPLINK TEXT INFO i LIVE TV is switched on for the first time.

D E F G Press the or or or button and then, O K BACK MENU 1 DVR button to select your desired language. EXIT GUIDE

Press the D or E button and then, OK button to 2 TIME OK TIME select your country. SHIFT SHIFT

* If you want to change Language/ Country selection MARK FAV VOL PR

D E 1 Press the MENU button and then use or button MUTE

to select the OPTION menu. 123

456 2 Press the G button and then use D or E button to select Language. The menus can be shown on the 789 screen in the selected language. LIST 0 Q.VIEW Or, Press the G button and then use D or E button

SOUND & LANGUAGE CONTROL to select Country. UPDATE INDEX TIME

? 3 Press the G button and then use F or G button to SLEEP HOLD REVEAL select your desired language or country. SUBTITLE RATIO I/II

4 Press the O K button.

5 Press the EXIT button to return to normal TV viewing.

! NOTE G If you do not finish the set-up Installation Guide by pressing EXIT or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on G If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. G The CI (Common Interface) function may not be applied based on country broadcasting circumstances. G DTV mode control buttons may not function based on country broadcasting circumstances. G In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on digital broadcasting circumstances. G The Country Setting "UK" should only be activated in UK.

88 BACK MENU DVR LANGUAGE SELECTION EXIT GUIDE

TIME OK TIME (IN DIGITAL MODE ONLY) SHIFT SHIFT The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. MARK FAV VOL PR Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the MUTE default language subtitle will be displayed. 123

456

UPDATE INDEX TIME Press the MENU button and then use D or E button to select ? 1 SLEEP HOLD REVEAL the OPTION menu. SUBTITLE RATIO I/II 2 Press the G button and then use D or E button to select Language.

3 Press the G button and then use D or E button to select Audio, Subtitle or Subtitle Hard of hearing.

4 Press the G button and then use F or G button to select your desired language. SOUND & LANGUAGE CONTROL 5 Press the EXIT button to return to normal TV viewing.

! NOTE < Audio Language Selection > Audio Language OSD Information G When two or more audio languages are broadcast, you can Display Status select the audio language with the I/II button on the N.A Not Available remote control. MPEG Audio G Press the D or E button to select an audio language. Dolby Digital Audio G Press the F or G button to select L+R, L+L or R+R. Audio for “Visual Impaired” Audio for “Hearing Impaired”

< Subtitle Language Selection > Subtitle Language OSD Information G When two or more subtitle languages are broadcast, you Display Status can select the subtitle language with the SUBTITLE button N.A Not Available on the remote control. TEXT Teletext Subtitle G Press the D or E button to select a subtitle language. Subtitle for “Hard of Hearing”

- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider. - When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.

89 TIME SETTING

CLOCK SETUP BACK MENU DVR EXIT GUIDE

The clock is set automatically when receiving a digital signal. TIME OK TIME (You can set the clock manually only if the TV has no DTV signal.) SHIFT SHIFT You must set the time correctly before using on/off timer function. MARK FAV VOL PR

SETUPO Clock Press the MENU button and then D or E button to PICTUREO Off Time 1 AUDIOO On Time Auto Sleep select the TIME menu. TIME G Time Zone OPTIONO 2 Press the G button and then D or E button to select SCREENO Clock. D V RO

G F G 3 Press the button and then or button to select Move MENU Prev. either the year, date, or time option. 1 Once selected, use the D or E button to set the year, date, and time options.

Clock G Time 20 14 Press the EXIT button to return to normal TV viewing. Off Time Date 12 Apr 4 On Time Year 2007 Auto Sleep Time Zone TIME SETTING

2 3

90 AUTO ON/OFF TIMER SETTING BACK MENU DVR The Off time function automatically switches the TV to standby EXIT GUIDE at a preset time.

Two hours after the TV is switched on by the On time function it TIME OK TIME will automatically switch back to standby mode unless a button SHIFT SHIFT has been pressed. Once the on time/off time is set, these functions operate daily MARK at the preset time. FAV The Off time function overrides the On timer function if both VOL PR are set to the same time. The TV must be in standby mode for the On time function to work.

SETUPO Clock Press the MENU button and then D or E button to PICTUREO Off Time 1 AUDIOO On Time Auto Sleep select the TIME menu. TIME G Time Zone OPTIONO 2 Press the G button and then D or E button to select SCREENO Off Time/On Time. D V RO

G D E 3 Press the button and then or button to select Move MENU Prev. O n. 1 • To cancel On/Off Time function, select Off.

4 Press the G button and then D or E button to set the Clock hour. Off Time On Time G Off Auto Sleep On Time Zone 18 : 00 5 Press the G button and then D or E button to set the TIME SETTING Volume 3 minutes. Mode TV PR 0 6 For On Time function only

• Programme: Press the G button and then D or E but- ton to select TV, DTV or Radio in the Mode menu. 2 3 4 5 6 And then, Press the G button and then D or E button to select the programme.

• Volume: Press the G button and then D or E but- ton to adjust volume level at switch-on.

7 Press the EXIT button to return to normal TV viewing.

91 TIME SETTING

AUTO SHUT-OFF SETTING BACK MENU DVR If the TV is switched on and there is no input signal, it will EXIT GUIDE switch off automatically after 10 minutes.

TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR

SETUPO Clock Press the MENU button and then D or E button to PICTUREO Off Time 1 AUDIOO On Time Auto Sleep select the TIME menu. TIME G Time Zone OPTIONO 2 Press the G button and then D or E button to select SCREENO Auto Sleep. D V RO

G D E 3 Press the button and then or button to select Move MENU Prev. Off or O n. 1 4 Press the EXIT button to return to normal TV viewing.

Clock Off Time On Time Auto Sleep G Off Time Zone On TIME SETTING

2 3

92 BACK MENU DVR EXIT GUIDE TIME ZONE SETUP

When you select a Time Zone city, the TV time is set by the TIME OK TIME time offset information based on Time Zone and GMT SHIFT SHIFT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. MARK

UPDATE INDEX TIME 1 Press the MENU button and then D or E button to ? select the TIME menu. SLEEP HOLD REVEAL SUBTITLE RATIO I/II 2 Press the G button and then D or E button to select Time Zone.

3 Press the G button and then F or G button to select SETUPO Clock your viewing area time zone. PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone 4 Press the EXIT button to return to normal TV viewing. OPTIONO SCREENO D V RO

Move MENU Prev. 1

SLEEP TIMER SETTING Clock Off Time On Time You do not have to remember to switch the TV off before you Auto Sleep Time Zone G Time Zone go to sleep. London GMT The sleep timer automatically switches the TV to standby after the preset time has elapsed. TIME SETTING

a Press the SLEEP button repeatedly to select the num- 2 3 ber of minutes.

The display ‘ - - - Min ’ will appear on the screen, followed by 1 0, 2 0, 3 0, 6 0, 9 0, 120, 180 and 240. b When the number of minutes required is displayed on the screen, the timer begins to count down from the number of minutes selected.

c To view the remaining sleep time, press the SLEEP but- ton once. d To cancel the sleep time, repeatedly press the SLEEP button until the display ‘ - - - Min ’ appears. e When you switch the TV off, the preset sleep time is cancelled.

93 PARENTAL CONTROL / RATINGS

BACK MENU DVR EXIT GUIDE SET PASSWORD & LOCK SYSTEM

TIME OK TIME SHIFT SHIFT

Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. MARK FAV VOL PR

MUTE

123

456

789

LIST 0 Q.VIEW

SETUPO Language Press the MENU button and then D or E button to PICTUREO Country 1 AUDIOO Lock System Parental Control select the OPTION menu. TIMEO Input Label OPTION G SIMPLINK 2 Press the G button and then D or E button to select SCREENO Factory Mode Lock System. D V RO

G F G 3 Press the button and then or button to select Move MENU Prev. O n. 1 To set the password

Press the G button and then use the NUMBER buttons Language to input a 4-digit password. Country Lock Off Lock System G Parental Control Set Password Input Label New Be sure to remember this number! SIMPLINK Factory Mode PARENTAL CONTROL / RATING Confirm Re-enter new password for confirm.

If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset. 2 3 4 Press the EXIT button to return to normal TV viewing.

94 BACK MENU INPUT MODE DVR D/A TV POWER EXIT GUIDE PARENTAL CONTROL TV/RADIO DVD INPUT BRIGHT VCR TIME OK TIME This function operates according to information from the SHIFT SHIFT broadcasting station. SIMPLINK TEXT INFO i LIVE TV Therefore if the signal has incorrect information, this function does not operate. This allows you to set up blocking schemes to block spe- MARK cific channels and ratings. FAV VOL PR A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. MUTE Recording and TimeShift Mode can be accessed even 123 when locked or rated. When a programme is locked or rated with delayed state, 456 the message “locked program” is displayed without dis- playing the password window. 789 When recording a locked or rated programme, the recorded programme will be locked unless you enter the LIST 0 Q.VIEW password before the recording is finished. If you wish to play the locked programme, you should enter the pass- word. SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTION G SIMPLINK SCREENO Factory Mode D V RO

Move MENU Prev. 1

1 Press the MENU button and then D or E button to select the OPTION menu. Language Country Press the G button and then D or E button to select Lock System 2 Parental Control G Parental Guidance Parental Control. Input Label Off Then, press the G button to enter the password as SIMPLINK Key Lock Factory Mode Off requested. The TV is set up with the initial password “0-0-0-0”. PARENTAL CONTROL / RATING 3 Press the G button and then F or G button to select Parental Guidance or Key Lock. 2 3 4 Parental Guidance (In Digital mode only) Prevents children from watching certain adult’s TV pro- grammes, according to the ratings limit set. Key Lock In Key Lock ‘O n’, if the TV is turned off, press r The TV can be set so that the remote control is the / I, INPUT, PR D or E button on the TV required to control it. This feature can be used to or POWER, INPUT, D/A, PR + or - or NUMBER prevent unauthorised viewing. buttons on the remote control. 4 Press the D or E button to make appropriate adjust- With the Key Lock On, the display ments. Key Lock On appears on the screen if 5 Press the EXIT button to return to normal TV viewing. any button on the front panel is pressed while viewing the TV.

95 TELETEXT This feature is not available in all countries.

Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.

The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard tele- text) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

SWITCH ON/OFF

Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or EXIT button to switch off teletext. The previous mode reappears. SIMPLE TEXT

A Page selection

1 Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. 2 The PR+ or - button can be used to select the preceding or following page.

TOP TEXT

The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.

A Block / group / page selection

1 With the blue button you can progress from block to block.

TELETEXT 2 Use the yellow button to proceed to the next group with automatic overflow to the next block. 3 With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the PR+ button can be used. 4 The red button returns to the previous selection. Alternatively the PR- button can be used.

A Direct page selection

As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.

96 FASTEXT

The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond- ing coloured button.

A Page selection

1 Press thei button to select the index page. 2 You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. 3 AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. 4 The PR+ or - button can be used to select the preceding or following page.

SPECIAL TELETEXT FUNCTIONS

?

A REVEAL Press this button to display concealed information, such as solutions to riddles or puzzles. Press this button again to remove the information from the display.

A UPDATE Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button again to view the updated teletext page.

A TIME When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page num- ber. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the TELETEXT RED/GREEN, PR+ or - or NUMBER buttons. Press again to exit this function.

A HOLD Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The num- ber of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive. To continue press this button again.

97 DIGITAL TELETEXT *This function works in UK only.

The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button. If the digital teletext service or the digital teletext only service is on, then Trick Play is not supported. The immediate recording feature is not supported in the digital teletext only service. Digital teletext service is not supported in the delayed mode.

TELETEXT WITHIN DIGITAL SERVICE

1 Press the numeric or PR + or - button to select a digital service which broadcasts digital teletext. To know which are digital teletext services, refer to the EPG service list.

2 Follow the indications on digital teletext and move onto the next step by pressing TEXT, OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons etc.

3 To change digital teletext service, select a different ser- vice by the numeric or PR + or - button.

If pressing the MENU, GUIDE or INFO i button causes the teletext service disappear temporarily, press these buttons again to return to teletext.

TELETEXT IN DIGITAL SERVICE

1 Press the numeric or PR + or - button to select a certain service which broadcasts digital teletext.

2 Press the TEXT or coloured button to switch on teletext.

TELETEXT 3 Follow the indications on digital teletext and move onto the next step by pressing OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on.

4 Press the TEXT or colour button to switch off digital tele- text and return to TV viewing.

Some services may allow you to access text services by pressing the RED button.

If pressing the MENU, GUIDE or INFO i button causes the teletext service disappear temporarily. Press these buttons again to return to the teletext.

98 APPENDIX

TROUBLESHOOTING

The TV does not operate properly

A Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. The remote control does A Ensure that the batteries are installed with correct polarity (+ to +, - to -). not work A Ensure that the correct remote operating mode is set: DVD, VCR etc. A Install new batteries.

A Is the sleep timer set? Power is suddenly A Check the power control settings. Has the Power supply been interrupted. turned off A Is Auto sleep activated on this station.

The video function does not work.

A Check whether the TV is switched on. A Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? No picture & No sound A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.

Picture appears slowly A This is normal, the image is muted during the TV startup process. Please contact after switching on your service centre, if the picture has not appeared after five minutes.

A Adjust Colour in menu option. A Allow a sufficient distance between the TV and the VCR. No or poor colour A Try another channel. The problem may be with the broadcast. or poor picture A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.

Horizontal/vertical bars or picture shaking A Check for local interference such as an electrical appliance or power tool.

A Station or cable channel experiencing problems, tune to another station.

Poor reception on APPENDIX A Station signal is weak, reposition the antenna to receive weaker stations. some channels A Check for sources of possible interference.

Lines or streaks A Check antenna (Change the position of the antenna). in pictures

No picture A Check HDMI cable over version 1.2. when connecting HDMI If the HDMI cables don’t support HDMI version 1.2, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.2. 99 APPENDIX

The audio function does not work.

A Press the VOL + or - button. A Picture OK & No sound Sound muted? Press MUTE button. A Try another channel. The problem may be with the broadcast. A Are the audio cables installed properly? No output from one of the speakers A Adjust Balance in menu option.

Unusual sound from A A change in ambient humidity or temperature may result in an unusual noise inside the TV when the TV is switched on or off and does not indicate a fault with the TV.

No sound when A Check HDMI cable over version 1.2. connecting HDMI A Check USB cable over version 2.0. or USB *This feature is not available for all models.

The DVR function does not work.

HDD Failure A Format Hard Disk Drive. Note that all the contents recorded on the HDD will be erased. If this does not fix the problem, contact your nearest LG dealer.

A Check the Recording Space by pressing the DVR button. If there is no remaining space for recording, delete any unnecessary programmes Schedule Rec./Instant on the Recorded TV List. Rec. does not start. A Check the number of programmes on the Recorded TV List. The Maximum number of recordings is 255 on the Recorded TV List.

There is a problem in PC mode. (Only PC mode applied)

The signal is out of range A Adjust resolution, horizontal frequency, or vertical frequency. (Invalid format) A Check the input source.

Vertical bar or stripe on A Use Auto configure or adjust clock, phase, or H/V position. (Option) background & Horizontal Noise & Incorrect position

Screen colour is unstable A Check the signal cable. or single colour A Reinstall the PC video card.

APPENDIX There is a problem with PICTURE settings.

When the user changes A It means that the TV is currently set to In Store mode. the picture settings, the To switch to Home mode you should do the followings: TV automatically converts From the TV Menu, choose OPTION -> Factory Mode -> Factory back to the initial settings Reset(Use NUMBER buttons to input a 4-digit password. Wait for a few sec- after a certain period of onds for the TV to download again) -> OSD "Installation Guide" appears -> time. Choose Language -> Choose Home -> Select your Country and Time Zone -> Press O K button. Program search will begin automatically (You can stop the search by pressing the O K button). Now, you have completed switching to the Home mode. 100 MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.

2 Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet A To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. A Do not to use a wet cloth.

Extended Absence

CAUTION

G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges. APPENDIX

101 APPENDIX

PRODUCT SPECIFICATIONS

42PG69** 50PG69** MODELS 42PG6900-ZC/ 42PG6900-ZF 50PG6900-ZC/ 50PG6900-ZF 42PG6910-ZF 50PG6910-ZF 1044.4 x 735.4 x 308.0 mm 1235.6 x 849.3 x 364.1 mm Dimensions with stand 41.1 x 29.0 x 12.2 inches 48.7 x 33.5 x 14.4 inches (Width x Height x Depth)

1044.4 x 680.6 x 79.6 mm 1235.6 x 792.8 x 79.6 mm without stand 41.1 x 26.8 x 3.2 inches 48.7 x 31.3 x 3.2 inches

Weight with stand 28 kg / 61.7 lbs 43.7 kg / 96.3 lbs without stand 25 kg / 55.1 lbs 39.7 kg / 87.5 lbs

Power Requirement AC100-240V~ 50/60Hz AC100-240V~ 50/60Hz Power Consumption 310 W 420W

Television System PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’ Programme Coverage VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47 External Antenna Impedance 75 Ω

Operating Temperature 0 ~ 40°C / 32 ~ 104°F

Environmental Operating Humidity Less than 80%

conditions Storage Temperature -20 ~ 60°C / -4 ~ 140°F Storage Humidity Less than 85%

■ The specifications shown above may be changed without prior notice for quality improvement. APPENDIX

102 PROGRAMMING THE REMOTE CONTROL

The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers. Note that the remote control may not control all models from other brands.

Programming a code into a remote mode

1 Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device.

2 Switch on the component to be programmed, then press the corresponding mode button (such as DVD or VCR) on the remote control. The remote control button of the desired device is illumintated.

3 Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with the code.

4 Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off.

5 Press the MENU button to store the code.

6 Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.

PROGRAMMING CODE

DVD Brand Codes Brand Codes Brand Codes APPENDIX APEX DIGITAL 022 MITSUBISHI 002 RCA 005 006 DENON 020 014 NAD 023 SAMSUNG 011 015 GE 005 006 ONKYO 008 017 SONY 007 HARMAN KARDON 027 PANASONIC 003 009 THOMPSON 005 006 JVC 012 PHILIPS 013 TOSHIBA 019 008 LG 001 010 016 025 PIONEER 004 026 YAMAHA 009 018 MAGNAVOX 013 PROCEED 021 ZENITH 010 016 025 MARANTZ 024 PROSCAN 005 006

103 APPENDIX

VCR

Brand Codes Brand Codes Brand Codes AIWA 034 MAGNAVOX 031 033 034 041 SAMSUNG 032 040 102 104 AKAI 016 043 046 124 067 068 105 107 109 112 125 146 MARANTZ 012 031 033 067 113 115 120 122 AMPRO 072 069 125 ANAM 031 033 103 MARTA 101 SANSUI 022 043 048 135 AUDIO DYNAMICS 012 023 039 043 MATSUI 027 030 SANYO 003 007 010 014 BROKSONIC 035 037 129 MEI 031 033 102 134 CANON 028 031 033 MEMOREX 003 010 014 031 SCOTT 017 037 112 129 CAPEHART 108 033 034 053 072 131 CRAIG 003 040 135 101 102 134 139 SEARS 003 008 009 010 CURTIS MATHES 031 033 041 MGA 045 046 059 013 014 017 020 DAEWOO 005 007 010 064 MINOLTA 013 020 031 042 073 081 0 6 5 10 8 110 111 MITSUBISHI 013 020 045 046 101 112 116 117 119 049 051 059 061 SHARP 031 054 149 DAYTRON 108 151 SHINTOM 024 DBX 012 023 039 043 MTC 034 040 SONY 003 009 031 052 DYNATECH 034 053 MULTITECH 024 034 056 057 058 076 ELECTROHOME 059 NEC 012 023 039 043 077 078 149 EMERSON 006 017 025 027 048 SOUNDESIGN 034 029 031 034 035 NORDMENDE 043 STS 013 036 037 046 101 OPTONICA 053 054 SYLVANIA 031 033 034 059 129 131 138 153 PANASONIC 066 070 074 083 067 FISHER 003 008 009 010 133 140 145 SYMPHONIC 034 FUNAI 034 TANDY 010 034 GE 031 033 063 072 PENTAX 013 020 031 033 TATUNG 039 043 107 109 144 147 063 TEAC 034 039 043 GO VIDEO 132 136 PHILCO 031 034 067 TECHNICS 031 033 070 HARMAN KARDON 012 045 PHILIPS 031 033 034 054 TEKNIKA 019 031 033 034 HITACHI 004 018 026 034 067 071 101 101 043 063 137 150 PILOT 101 THOMAS 034 INSTANTREPLAY 031 033 PIONEER 013 021 048 TMK 006 JCL 031 033 PORTLAND 108 TOSHIBA 008 013 042 047 JCPENNY 012 013 015 033 PULSAR 072 059 082 112 131 040 066 101 QUARTZ 011 014 TOTEVISION 040 101 JENSEN 043 QUASAR 033 066 075 145 UNITECH 040 JVC 012 031 033 043 RCA 013 020 033 034 VECTOR RESEARCH 012 048 050 055 060 040 041 062 063 VICTOR 048 APPENDIX 130 150 152 107 109 140 144 VIDEO CONCEPTS 012 034 046 KENWOOD 014 034 039 043 145 147 VIDEOSONIC 040 047 048 REALISTIC 003 008 010 014 WARDS 003 013 017 024 LG (GOLDSTAR) 001 012 013 020 031 033 034 040 031 033 034 040 101 106 114 123 053 054 101 053 054 131 LLOYD 034 RICO 058 YAMAHA 012 034 039 043 LXI 003 009 013 014 RUNCO 148 ZENITH 034 048 056 017 034 101 106 SALORA 014 058 072 080 101 MAGIN 040

104 IR CODES 1. How to Connect

A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes

A Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz

Tc Carrier frequency FCAR = 1/Tc = fOSC/12 T1 Duty ratio = T1/Tc = 1/3

A Configuration of frame 1st frame

Lead code Low custom code High custom code Data code Data code

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Repeat frame

Repeat code Tf

A Lead code

9 ms 4.5 ms

A Repeat code

0.55 ms

9 ms 2.25 ms

A Bit description Bit ”0” Bit ”1” APPENDIX 0.56 ms 0.56 ms

1.12 ms 2.24 ms

A Frame interval: Tf The waveform is transmitted as long as a key is depressed.

Tf Tf

Tf=108ms @455KHz

105 APPENDIX

Code (Hexa) Function Note 00 PR + R/C BUTTON 01 PR - R/C BUTTON 02 VOL + R/C BUTTON 03 VOL - R/C BUTTON 40 Up (D) R/C BUTTON 41 Down (E) R/C BUTTON 06 Right (G) R/C BUTTON 07 Left (F) R/C BUTTON 08 POWER R/C BUTTON (POWER ON/OFF) 09 MUTE R/C BUTTON 10 Number Key 0 R/C BUTTON 11 Number Key 1 R/C BUTTON 12 Number Key 2 R/C BUTTON 13 Number Key 3 R/C BUTTON 14 Number Key 4 R/C BUTTON 15 Number Key 5 R/C BUTTON 16 Number Key 6 R/C BUTTON 17 Number Key 7 R/C BUTTON 18 Number Key 8 R/C BUTTON 19 Number Key 9 R/C BUTTON 0B INPUT R/C BUTTON AA INFO i R/C BUTTON AB GUIDE R/C BUTTON 56 SUBTITLE R/C BUTTON 5B EXIT R/C BUTTON 1E FAV R/C BUTTON 1A Q.VIEW R/C BUTTON 50 D/A R/C BUTTON F0 TV/RADIO R/C BUTTON 7E SIMPLINK R/C BUTTON E0 BRIGHT + R/C BUTTON E1 BRIGHT - R/C BUTTON 0A I/II R/C BUTTON 0E SLEEP R/C BUTTON 43 MENU R/C BUTTON 44 OK( ) R/C BUTTON 53 LIST R/C BUTTON 20 TEXT R/C BUTTON 2A REVEAL R/C BUTTON 26 TIME R/C BUTTON 28 BACK R/C BUTTON 62 UPDATE R/C BUTTON 70 INDEX R/C BUTTON 65 HOLD R/C BUTTON 61 BLUE Key R/C BUTTON 63 YELLOW Key R/C BUTTON 71 GREEN Key R/C BUTTON 72 RED Key R/C BUTTON 79 RATIO R/C BUTTON B0 G R/C BUTTON BA II R/C BUTTON B2 IFF R/C BUTTON B3 GGI R/C BUTTON

APPENDIX 8F FF R/C BUTTON 8E GG R/C BUTTON B1 A R/C BUTTON BD O R/C BUTTON 7C DVR R/C BUTTON 9E LIVE TV R/C BUTTON

106 EXTERNAL CONTROL DEVICE SETUP RS-232C Setup

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV.

Type of Connector; D-Sub 9-Pin Male

No. Pin Name

1 No connection

2 RXD (Receive data) 1 5 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 6 9 8 CTS (Clear to send) 9 No Connection

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations(Not standard) PC TV PC TV

RXD 2 3 TXD RXD 2 3 TXD APPENDIX TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DSR DTR 4 6 DTR DSR 6 4 DTR DSR 6 4 DSR RTS 7 8 CTS RTS 7 7 RTS CTS 8 7 RTS CTS 8 8 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9

107 APPENDIX

Set ID

BACK MENU DVR EXIT GUIDE Use this function to specify a set ID number.

Refer to ‘Real Data Mapping’. G p.112 TIME OK TIME SHIFT SHIFT

MARK FAV VOL PR

SETUPO Language PICTUREO Country Press the MENU button and then use D or E button AUDIOO Lock System Parental Control 1 TIMEO to select the OPTION menu. Input Label OPTION G SIMPLINK SCREENO Factory Mode D V RO Press the G button and then use D or E button to 2 select Factory Mode. Move MENU Prev. 1

Press the G button and then use D or E button to 3 select Set ID. Language Set ID Country 1 Lock System Factory Reset Parental Control OK Press the G button and then use F or G button to Input Label 4 SIMPLINK ISM Method adjust Set ID to choose the desired TV ID number. Factory Mode G Normal The adjustment range of SET ID is 1~99. Low Power Off

5 Press EXIT button to return to normal TV viewing. 2

Language Set ID Country F G 1 Lock System Factory Reset Parental Control Input Label OK APPENDIX SIMPLINK ISM Method Factory Mode Normal Low Power Off

3 4

108 Communication Parameters

A Baud rate : 9600 bps (UART) A Stop bit : 1 bit A Data length : 8 bits A Communication code : ASCII code A Parity : None A Use a crossed (null modem) cable.

Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA Transmission 1 2 (Hexadecimal) [Command1][Command2][ ][Set ID][ ][Data][Cr]

01. Power k a 00 ~ 01 * [Command 1] : First command to control the TV. 02. Aspect Ratio k c Refer to p. 110 (j, k, m or x) 03. Screen Mute k d 00 ~ 01 * [Command 2] : Second command to control the TV. 04. Volume Mute k e 00 ~ 01 * [Set ID] : You can adjust the TV ID to choose 05. Volume Control k f 00 ~ 64 desired monitor ID number in option 06. Contrast k g 00 ~ 64 menu. Adjustment range is 1 ~ 99. 07. Brightness k h 00 ~ 64 When selecting Set ID ‘0’, every connected 08. Colour k i 00 ~ 64 TV is controlled. 09. Tint k j 00 ~ 64 Set ID is indicated as decimal (1~99) on 10. Sharpness k k 00 ~ 64 menu and as Hexa decimal (0x0~0x63) 11. OSD Select k l 00 ~ 01 on transmission/receiving protocol. 12. Remote control lock mode k m 00 ~ 01 * [DATA] : To transmit command data. 13. Balance k t 00 ~ 64 Transmit ‘FF’ data to read status of command. 14. Colour Temperature k u 00 ~ 03 * [Cr] : Carriage Return 15. Red Adjustment k v 00 ~ 50 ASCII code ‘0x0D’ ~ 16. Green Adjustment k w 00 50 * [ ] : ASCII code ‘space (0x20)’ 17. Blue Adjustment k $ 00 ~ 50 18. Abnormal Status k z 00 ~ 07 OK Acknowledgement 19. ISM Method j p Refer to p. 112 [Command2][ ][Set ID][ ][OK][Data][x] 20. Low Power j q 00 ~ 01 * The TV transmits ACK (acknowledgement) based on 21. Orbiter Time Setting j r 01 ~ FE this format when receiving normal data. At this time, if 22. Orbiter Pixel Setting j s 00 ~ 03 the data is data read mode, it indicates present status 23. Auto Configure j u 01 data. If the data is data write mode, it returns the 24. Channel Select Command m a Refer to p. 113 data of the PC computer. 25. Send IR Code m c Key Code Error Acknowledgement 26. Input select (Main) x b Refer to p. 113 APPENDIX [Command2][ ][Set ID][ ][NG][Data][x] * When setting the 18 ~ 26, a menu does not appear on screen. * The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.

Data 01: Illegal Code 02: not support function 03: Wait more time

109 APPENDIX

01. Power (Command 2 : a) 04. Volume Mute (Command 2 : e) G To control Power On/Off of the TV. G To control volume mute on/off. Transmission You can also adjust mute using the MUTE button on remote control. [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On [k][e][ ][Set ID][ ][Data][Cr] Ack Data 00 : Volume mute on (Volume off) [a][ ][Set ID][ ][OK][Data][x] 01 : Volume mute off (Volume on) G To show Power On/Off. Ack Transmission [e][ ][Set ID][ ][OK][Data][x] [k][a][ ][Set ID][ ][FF][Cr] 05. Volume Control (Command 2 : f) Ack G To adjust volume. [a][ ][Set ID][ ][OK][Data][x] You can also adjust volume with the VOLUME buttons on remote control. * Similarly, if other functions transmit ‘0xFF’ data based on Transmission this format, Acknowledgement data feed back presents status about each function. [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to ‘Real data mapping 1’. See page 112. 02. Aspect Ratio (Command 2 : c) * Ack G To adjust the screen format. [f][ ][Set ID][ ][OK][Data][x] You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in 06. Contrast (Command 2 : g) the SCREEN menu. G To adjust screen contrast. Transmission You can also adjust contrast in the PICTURE menu. [k][c][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Normal screen (4:3) 04 : Original [k][g][ ][Set ID][ ][Data][Cr] 01 : Wide screen (16:9) 05 : 14:9 02 : Zoom1 Data Min : 00 ~ Max : 64 03 : Zoom2 * Refer to ‘Real data mapping 1’. See page 112. Ack Ack [g][ ][Set ID][ ][OK][Data][x] [c][ ][Set ID][ ][OK][Data][x] 07. Brightness (Command 2 : h) * Using the PC input, you select either 16:9 or 4:3 G To adjust screen brightness. screen aspect ratio. You can also adjust brightness in the PICTURE menu. Transmission 03. Screen Mute (Command 2 : d) [k][h][ ][Set ID][ ][Data][Cr] G To select screen mute on/off. Data Min : 00 ~ Max : 64 Transmission * Refer to ‘Real data mapping 1’. See page 112. Ack [k][d][ ][Set ID][ ][Data][Cr] [h][ ][Set ID][ ][OK][Data][x] Data 00 : Screen mute off (Picture on) 01 : Screen mute on (Picture off) APPENDIX Ack [d][ ][Set ID][ ][OK][Data][x]

110 08. Colour (Command 2 : i) 13. Balance (Command 2 : t) G To adjust the screen colour. G To adjust balance. You can also adjust colour in the PICTURE menu. You can also adjust balance in the AUDIO menu. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Data Min : 00 ~ Max : 64 Refer to ‘Real data mapping 1’. See page 112. * * Refer to ‘Real data mapping 1’. See page 112. Ack Ack [i][ ][Set ID][ ][OK][Data][x] [t][ ][Set ID][ ][OK][Data][x] 09. Tint (Command 2 : j) G To adjust the screen tint. 14. Colour Temperature (Command 2 : u) You can also adjust tint in the PICTURE menu. G To adjust colour temperature. You can also adjust Colour Transmission Temperature in the PICTURE menu. [k][j][ ][Set ID][ ][Data][Cr] Transmission Data Red : 00 ~ Green : 64 [k][u][ ][Set ID][ ][Data][Cr] Refer to ‘Real data mapping 1’. See page 112. * Data 00: Cool 01: Medium 02: Warm 03: User Ack Ack [j][ ][Set ID][ ][OK][Data][x] [u][ ][Set ID][ ][OK][Data][x] 10. Sharpness (Command 2 : k) G To adjust the screen sharpness. 15. Red Adjustment (Command 2 : v) You can also adjust sharpness in the PICTURE menu. Transmission G To adjust red in colour temperature. [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 112. Data Min : 00 ~ Max : 50 Ack * Refer to ‘Real data mapping 2’. See page 112. Ack [k][ ][Set ID][ ][OK][Data][x] [v][ ][Set ID][ ][OK][Data][x] 11. OSD Select (Command 2 : l) G To select OSD (On Screen Display) on/off when con- trolling remotely. 16. Green Adjustment (Command 2 : w) G Transmission To adjust green in colour temperature. Transmission [k][l][ ][Set ID][ ][Data][Cr] [k][w][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on Ack Data Min : 00 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 112. [l][ ][Set ID][ ][OK][Data][x] Ack 12. Remote control lock mode (Command 2 : m) [w][ ][Set ID][ ][OK][Data][x] G To lock the front panel controls on the monitor and remote control. 17. Blue Adjustment (Command 2 : $) Transmission APPENDIX G To adjust blue in colour temperature. [k][m][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Lock off 01 : Lock on [k][$][ ][Set ID][ ][Data][Cr] Ack Data Min : 00 ~ Max : 50 [m][ ][Set ID][ ][OK][Data][x] * Refer to ‘Real data mapping 2’. See page 112. * If you are not using the remote control, use this mode. Ack When main power is on/off, external control lock is [$][ ][Set ID][ ][OK][Data][x] released.

111 APPENDIX

18. Abnormal State (Command 2 : z) 20. Low Power (Command 1 : j, Command 2 : q) G To recognize an abnormal state. Transmission G To reduce the power consumption of the TV. You can also adjust Low Power in OPTION menu. [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF : Read Transmission Ack [z][ ][Set ID][ ][OK][Data][x] [j][q][ ][Set ID][ ][Data][ ][Cr] Data 00: Normal (Power on and signal exist) Data 00 : Off 01: No signal (Power on) 01 : On 02: Turn the TV off by remote control Ack 03: Turn the TV off by sleep time function [q][ ][Set ID][ ][OK/NG][Data][x] 04: Turn the TV off by RS-232C function 05: 5V down 06: AC down 07: Turn the TV off by Fan Alarm function 21. Orbiter Time Setting 08: Turn the TV off by Off time function (Command 1 : j, Command 2 : r) 09: Turn the TV off by Auto sleep function G To adjust orbiter operation time term. * This function is “read only”. Transmission

19. ISM Method [j][r][ ][Set ID][ ][Data][ ][Cr] (Command 1 : j, Command 2 : p) Data Min: 01 ~ Max: FE Refer to ‘Real data mapping 1’. G To control the ISM method. You can also adjust ISM * Method in OPTION menu. Ack [r][ ][Set ID][ ][OK/NG][Data][x] Transmission

[j][p][ ][Set ID][ ][Data][Cr] Data 00: Normal 02: Orbiter 22. Orbiter Pixel Setting 01: White wash 03: Inversion (Command 1 : j, Command 2 : s) Ack G To adjust pixel number in orbiter function. [p][ ][Set ID][ ][OK/NG][Data][x] Transmission

[j][s][ ][Set ID][ ][Data][Cr] Data Min: 01 ~ Max: 03 * Refer to ‘Real data mapping 1’. Real data mapping 1 Real data mapping 2 * * Ack 00 : Step 0 00 : -40 01 : -39 [s][ ][Set ID][ ][OK/NG][Data][x] A : Step 10 (Set ID 10) 02 : -38 F : Step 15 (Set ID 15) APPENDIX 10: Step 16 (Set ID 16) 28 : 0 64: Step 100 4E : +38 4F : +39 6E : Step 110 50 : +40 73: Step 115 74: Step 116 C7: Step 199 FE : Step 254 FF : Step 255

112 23. Auto Configure 26. Input select (Command 1 : x, Command 2 : b) (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking G To select input source. automatically. It works only in RGB (PC) mode. Transmission Transmission [x][b][ ][Set ID][ ][Data][Cr] [j][u][ ][Set ID][ ][Data][Cr] Data Structure Data 01: To set Ack MSB LSB [u][ ][Set ID][ ][OK/NG][Data][x] 0 0 0 0 0 0 0 0 External Input Input Number 24. Channel Select Command (Command 1 : m, Command 2 : a) External Input Data G Select channel to following physical number. 0000 DTV Transmission 0 0 0 1 Analogue [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] 0010 AV Data00 : High channel data Data01 : Low channel data 0 0 1 1 Component ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 88 (188H), 0100 RGB DTV No. 0 -> Don’t care Data020x00 : ATV Main 0 1 0 1 HDMI 0x10 : DTV Main Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Input Number Data Digital - Min: 00 ~ Max: 3E7 (0~999) 0 0 0 0 Input1 Ack 0 0 0 1 Input2 [a][ ][Set ID][ ][OK/NG][Data][x] 0 0 1 0 Input3 Data Min: 00 ~ Max: 7D 0 0 1 1 Input4

Ack

25. Send IR Code [b][ ][Set ID][ ][OK/NG][Data][x] (Command 1 : m, Command 2 : c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 106. Ack [c][ ][Set ID][ ][OK/NG][Data][x] APPENDIX

113