Power Solution Index
Total Page:16
File Type:pdf, Size:1020Kb
FIBERGLASS STEP LADDER Fiberglass step ladder features non-conductive channel for working safety. Resistant to electricity, and will not dent and rust. Fiberglass step ladder is ideal for professional use. Load capacity 135kg (300lbs) and meet ANSI 14.5 (2007) and EN131 standard. POWER SOLUTION INDEX Powerfit 118 - 122 Ladder top tool tray to secure tools from falling while keeping them K-Lok [400A] 123 - 126 right at hand. Single Pole Distribution Box 127 - 128 K-Lok [150A] 129 - 131 19-Pin 132 - 135 Dr. Harting & Dr.Soca 136 19-pin Cable Tester 137 6’ Fiberglass Step Ladder (with ladder top tool tray) Multi-pin 138 7-Pin 139 8’ Fiberglass Step Ladder (with ladder top tool tray) Head To Ballast 140 Molded brace and slip-resistant foot pad combination at the bottom increases the protection against damage. Stage Pin 141 - 142 * Attention: Please read the information of warning labels posted on the ladder for making the use of ladder properly. Turn-Lok 143 - 145 Features CEE Form & Schuko 146 - 147 1. Red color for the greatest visibility and caution. 2. Fiberglass channel is non-conductive for working around electricity. XLR 148 3. U-shape channel made of multi-layer fiberglass for maximum strength. Powerlead T1 149 4. Wide step for comfortable standing or climbing. 5. Every rivet well backed up to protect channel. Powerlead 150 6. Back-up aluminum plates reinforce all top connectors. Linear Power Distribution Box 151 - 152 Item Description Height Close Height Steps Style Top Feature Weight Load Capacity Power Distro Box 153 KFL-B4 4' Fliberglass Ladder 110cm 120cm 3 Single-sided Tool Tray 8.9 kg 135 kg KFL-T4 4' Fliberglass Ladder 110cm 120cm 3 Double-sided Tool Tray 11.5 kg 135 kg RJ45 Ethernet 154 Content KFL-B6 6' Fliberglass Ladder 170cm 180cm 5 Single-sided Tool Tray 8.9 kg 135 kg Power Distribution Box 155 - 159 Kupo fulfills the needs of the professional KFL-T6 6' Fliberglass Ladder 170cm 180cm 5 Double-sided Tool Tray 11.5 kg 135 kg Rubber Splitter Box 160 entertainment industry with its wide selec- KFL-B8 8' Fliberglass Ladder 230cm 240cm 7 Single-sided Tool Tray 12.0 kg 135 kg Y Splitter 161 tions of connectors, from stage pins, motor KFL-T8 8' Fliberglass Ladder 230cm 240cm 7 Double-sided Tool Tray 15.5 kg 135 kg Cable Assembly 162 - 164 7Pins, 19Pins, Head to Ballast, CEE Form, 400A KFL-B10 10' Fliberglass Ladder 290cm 300cm 9 Single-sided Tool Tray 14.9 kg 135 kg & 150A single pole connector, 16Pin, Powerfit, KFL-T10 10' Fliberglass Ladder 290cm 300cm 9 Double-sided Tool Tray 19.3 kg 135 kg Audio Stage Box 165 PowerLead, RJ45 Ethernet, Turn Lock to XLR KFL-B12 12' Fliberglass Ladder 350cm 360cm 11 Single-sided Tool Tray 18.3 kg 135 kg Multi-Cable Roller 166 connectors. In compliance with the demand for KFL-T12 12' Fliberglass Ladder 350cm 360cm 11 Double-sided Tool Tray 25.5 kg 135 kg Versatile Socket 167 safe operation, a few of our connectors are KFL-D20 20' Fliberglass Extension Ladder 1130cm 625cm 40 Extension N/A 19.4 kg 135 kg DMX Lighting Bar 168 - 169 certified with cUL, UL or CE that ensure the Ku-hand & Adhesive Heat-Shrink Tube 170 upmost safety of stage technicians. Cable Crossover 171 Come and join us on www.stage.com.tw Cable Tie 172 MEZ Strap 174 Gaffa Tape 175 Ladder top tool tray to secure tools Slip-resistance aluminum step Extra heavy duty aluminum Molded brace and slip-resistant Cloth Spike Tape 176 from falling while keeping them is secured with 6 rivets on spreaders to secure the ladder foot pad combination at the right at hand. fiberglass channel. in A shape. bottom increases the protection Adhesive Hook & Loop Tape & Clip 177 against damage. Cable Holder & Barrier Tape 178 Entertainment Power Solution 117 POWERFIT POWERFIT Line Source Features POWERFIT Connectors ‧With a male contact, mating with Line Drain or Panel Drain. ‧Ergonomic hand grip assists easier handling. PowerFit connectors are well fabricated and compatible with major brands of single-pole power connector. The innovative and patent key ‧Innovative patent key-release pin for easy uncoupling without ‧Color coded and mechanically keyed to prevent mating errors. releasing pin, particularly embedded on each line source and panel source, delivers great safety and convenience without additional tool additional tool. ‧Contacts fitted with a plastic end cap to prevent accidental while uncoupling. ‧Shorter POM cotter pin is equipped. touching of live parts. 170 ‧IP 2X finger protection against electric shock. PowerFit is made in high standards. Full series employ high impact and temperature resistance thermoplastic, with flame retardant ‧M40 cable gland is supplied with two rubber bushings, compound. Ergonomic rubber hand grip on each line connector provides the great comfort to the utility. The M40 cable gland comes standard 18mm (I.D.) and 26m (I.D.), for gripping cables up to19-28mm diameter. and while connectors mated, it becomes IP67 rated. Unsurpassed pushing button design makes the handling of coupling and uncoupling Ø43.5 ‧R120 Reduction Sleeve, 16.50mm (I.D.) x 32mm(L), is included easier. Respective phase and line information is clearly marked on the connectors for easy identification. The contact is made of brass with as standard for cable diameter 120mmsq; other size of sleeve silver plated, providing excellent conductivity. Cotter pin is made of POM featuring great insulation, high stiffness, low friction and absorbent. is available upon request. Cable Gland M40 Technical Information Never reuse cotter pin; reusing cotter pin might expose the operation to electrical danger. ‧Current Rating: 400A continuous with 120mmsq 660A continous with ‧Contact Resistance: 0.1m Ohms. 240mmsq cable. ‧IP rating while mated: IP67. ‧Withstanding Voltage: 1000Vac. ‧Contact Material: Brass with silver plated. ‧Test Voltage: 4500Vac. ‧Housing Material: High Impact Resistant Thermoplastic. ‧Short Circuit Rating: Up to 35.5kA. ‧Cotter Pin Material: POM. ‧Insulation Resistance: >5000 M Ohms at 500Vac. ‧Working Temperature: 45 to 85 Degree C ‧Contact Type: Set Screw. ‧Set Screw Torque on Brass Contact: 10.5 N/meter (minimum required). Youtube ‧Mating Cycle: 500 Powerfit 400a Single Pole ‧Flammability: UL94-V0. PFLS-1BN-S120M40A Line 1 PFLS-2BK-S120M40A Line 2 PFLS-3GY-S120M40A Line 3 ‧CE and RoHS compliant. Power Connector Innovative and key releasing pin delivers great convenience while uncoupling. POM cotter pin for excellent insulation. M40*1.5 cable gland with bushing for IP67. PFLS-NBL-S120M40A NEUTRAL PFLS-EGN-S120M40A EARTH PFLS-1R-S120M40A Line 1 Brass with silver-plated Rubber bushing for superior conductivity. I.D.18 mm or 26 mm for gripping cable. Silicon O-ring provides upmost airtight-alike mating. Non-conductive high impact-resistant thermoplastic PFLS-2W-S120M40A Line 2 PFLS-3BL-S120M40A Line 3 PFLS-NBK-S120M40A NEUTRAL for max durability and safety. Ergonomic rubber grip offers comfort Type Key Position Color Contact Type Cable Gland and easier handling. LS = Line Source E = Earth GN = Green S120 = Set Screw 120mmsq for 400A M40A = 19-28mm N = Neutral BL = Blue C240 = 240mmsq Crimp for 660A M40B = 22-32mm 1 = Line 1 BN = Brown 2 = Line 2 BK = Black 3 = Line 3 GY = Grey R = Red Y = Yellow W = White PowerFit with separated release key (L type) Powerfit with separated release key is also available. Item number for each line source with separated key release will find “L” in the suffix. Innovative M40 cable gland comes R120 reduction sleeve Comfort handling with Shorter cotter pin for push-to-release design with two rubber sleeves made of brass with superior & ergonomic line source; longer one makes the uncoupling (I.D. 18mm and 26mm) silver plated for rubber grip. for line drain. For safety, handy without for the greatest accommodating up to never reuse cotter pin. additional tool. This can flexibility with fitting the dia. 16.50mm wire. be dismantled through cable. small slotted screwdriver if needed. PFLS-NBL-S120M40A-L PF-LOCK 400A Line Source, Neutral, with separated key release design. Release Key for PowerFit Line Source & Panel Source (L type). 118 Entertainment Power Solution POWERFIT POWERFIT Line Source Features POWERFIT Connectors ‧With a male contact, mating with Line Drain or Panel Drain. ‧Ergonomic hand grip assists easier handling. PowerFit connectors are well fabricated and compatible with major brands of single-pole power connector. The innovative and patent key ‧Innovative patent key-release pin for easy uncoupling without ‧Color coded and mechanically keyed to prevent mating errors. releasing pin, particularly embedded on each line source and panel source, delivers great safety and convenience without additional tool additional tool. ‧Contacts fitted with a plastic end cap to prevent accidental while uncoupling. ‧Shorter POM cotter pin is equipped. touching of live parts. 170 ‧IP 2X finger protection against electric shock. PowerFit is made in high standards. Full series employ high impact and temperature resistance thermoplastic, with flame retardant ‧M40 cable gland is supplied with two rubber bushings, compound. Ergonomic rubber hand grip on each line connector provides the great comfort to the utility. The M40 cable gland comes standard 18mm (I.D.) and 26m (I.D.), for gripping cables up to19-28mm diameter. and while connectors mated, it becomes IP67 rated. Unsurpassed pushing button design makes the handling of coupling and uncoupling Ø43.5 ‧R120 Reduction Sleeve, 16.50mm (I.D.) x 32mm(L), is included easier. Respective phase and line information is clearly marked on the connectors for easy identification. The contact is made of brass with as standard for cable diameter 120mmsq; other size of sleeve silver plated, providing excellent conductivity. Cotter pin is made of POM featuring great insulation, high stiffness, low friction and absorbent.