DOCSLIB.ORG

Fire Protection, Soundproofing and Thermal Insulation

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fire Protection, Soundproofing and Thermal Insulation ROMA INSULATION SYSTEMS Fire protection, soundproofing and thermal insulation Quick-assembly insulating panel, types FP, FV and AFP Acoustic 02 ROMA quick-assembly insulating panel, types FP and FP+ Cladding layers Continuously galvanized steel sheet with organic Two-sided tongue-and-groove for an plastic coating, further cladding layers available on request outstanding seal Surface finish Standard: Profiled internal/external face (58mm) Insulating core Mineral wool, fiber-adjusted, water-repellent and non-flammable A1 Sealing options Density FP panel: 100kg/m³; FP+ panel: 135kg/m³ Fire tests Euro class A2-s1 d0 acc. to EN 13501-1; FM Approval (4880, 4881, 4882) Fire resistance* in acc. FP060-EI45; FP080-EI90; FP100-EI120 (vertical) with classification report acc. to EN 13501-2 Fire resistance D FP100-EI30; FP100-EI60 (vert.); FP100-EI90 (vert.) acc. to EN 13501-2 Approval Notification of approval ABg Z-10.49-511 and Z-19.52-2187 (Fire resistance) of the DIBt Berlin in acc. with DIN EN 14509 (CE marking) System dimensions Unit width 1170mm; Module width 1150mm Available lengths Up to 15m, depending on panel thickness Sealing options Production tolerances Acc. to EN 14509 Sound insulation FP approx. 31dB and FP+ approx. 32dB for all panel thicknesses Surfaces Statics See our span tables The surfaces of the stone wool panels can be combined with the Panel type ROMA PIR sandwich panel surface FP170 FP140 FP100 FP150 FP120 FP240 FP200 FP060 FP080 options. Both panel types can be Density kg/m³ 100 laid both horizontally and vertically. This gives you more options to Panel thickness mm 60 80 100 120 140 150 170 200 240 choose from as a builder: You can Cladding layer thickness complete building projects with two External mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 different insulating panel types and Internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 still achieve a consistent facade appearance. Our many material and Panel weight approx. kg/m2 15.3 17.3 19.3 21.3 23.3 24.3 26.3 29.3 33.3 color options give you a wide range U-value certified to W/(m2 · K) 0.693 0.516 0.413 0.345 0.297 0.277 0.245 0.208 0.174 of design options. EN 14509 with joint Panel type 240 200 060 080 170 140 100 150 120 + + + + + + + + + FP FP FP FP FP FP FP FP FP Density kg/m³ 135 Panel weight approx. kg/m2 17.4 20.1 22.8 25.5 28.2 29.6 32.2 36.3 41.7 U-value certified to W/(m2 · K) 0.751 0.561 0.450 0.376 0.323 0.302 0.267 0.227 0.190 EN 14509 with joint Design L * Not approved as an application in Germany (D). 03 ROMA quick-assembly insulating panel, types FV and FV+ Concealed fitting as Cladding layers Continuously galvanized steel sheet with organic plastic coating, a design element further cladding layers available on request Surface finish Standard: External face microprofiled (14mm), Sealing options internal face profiled (55mm) Insulating core Mineral wool, fiber-adjusted, water-repellent and non-flammable A1 Density FV panel: 100kg/m³; FV+ panel: 135kg/m³ Fire tests Euro class A2-s1, d0 acc. to EN 13501-1; FM Approval (4880, 4881, 4882) Fire resistance* in acc. FV+060-EI30; FV+100-EI120 (vertical) acc. to EN 13501-2 with classification report Approval Notification of approval ABg Z-10.49-511 of the DIBt Berlin in acc. with DIN EN 14509 (CE marking) System dimensions Unit width 1043mm; Module width 1000mm Sealing options Available lengths Up to 15m, depending on panel thickness Production tolerances Acc. to EN 14509 Four surface profile designs Sound insulation FV approx. 31dB and FV+ approx. 32dB for all panel thicknesses are available: Statics See our span tables M = microprofiled E = smooth Panel type FV170 FV140 FV240 FV100 FV150 FV120 FV200 FV060 L = profiled W = w-profiled FV080 Density kg/m³ 100 Panel thickness mm 60 80 100 120 140 150 170 200 240 Cladding layer thickn. External mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 Design M Internal mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Panel weight approx. kg/m2 15.6 17.6 19.6 21.6 23.6 24.6 26.6 29.6 33.6 U-value certified to W/(m2 · K) 0.798 0.544 0.427 0.354 0.303 0.282 0.248 0.211 0.175 EN 14509 with joint Panel type 240 200 060 080 170 140 100 150 Design E 120 + + + + + + + + + FV FV FV FV FV FV FV FV FV Density kg/m³ 135 Panel weight approx. kg/m2 17.7 20.4 23.1 25.8 28.5 29.6 32.6 36.6 42.0 U-value certified to W/(m2 · K) 0.865 0.591 0.465 0.385 0.330 0.308 0.271 0.230 0.191 Design W EN 14509 with join * Not approved as an application in Germany (D). 04 ROMA quick-assembly acoustic panel, types AFP and AFP+ Acoustic panel for indoor applications Cladding layers Continuously galvanized steel sheet with organic plastic coating, further cladding layers available on request Surface finish Standard: Internal smooth, perforated, external face profiled (58mm) Relative open area Relative open area 30%, hole diameter 4mm Insulating core Mineral wool, fiber-adjusted, water-repellent and non-flammable A1 Density AFP panel: 100kg/m³; AFP+ panel: 135kg/m³ Fire tests Euro class A2-s1, d0 acc. to EN 13501-1; FM Approval (4880, 4881, 4882) Evaluator Sound LW = 1.00 highest sound absorbing class A absorption coefficient (evaluated acc. to ISO 11654) System dimensions Unit width 1170mm; Module width 1150mm Available lengths Up to 15m, depending on panel thickness Production tolerances Acc. to EN 14509 Surface profiles Sound insulation Approx. 34dB for all panel thicknesses profiled, smooth and perforated plate Statics See our span tables are available. Panel type LB = perforated plate AFP170 AFP140 AFP100 AFP150 AFP120 AFP240 AFP200 AFP060 AFP080 The ideal surface for enhancing struc- Density kg/m³ 100 tural acoustics through the use of round Panel thickness mm 60 80 100 120 140 150 170 200 240 holes and a stone wool insulating core Cladding layer thickn. External mm 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Internal mm 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 Panel weight approx. kg/m2 15.1 17.1 19.1 21.1 23.1 24.1 26.1 29.1 33.1 U-value certified to W/(m2 · K) 0.693 0.516 0.413 0.345 0.297 0.277 0.245 0.208 0.174 EN 14509 with joint Design LB Panel type 240 060 200 080 170 140 100 120 150 + + + + + + + + + AFP AFP AFP AFP AFP AFP AFP AFP AFP Density kg/m³ 135 Panel weight approx. kg/m2 17.2 19.9 22.6 25.3 28.0 29.4 32.0 36.1 41.5 U-value certified to W/(m2 · K) 0.751 0.561 0.450 0.376 0.323 0.302 0.267 0.227 0.190 EN 14509 with joint 05 Sample applications MW wall panel, type FP MW wall panel, type FV MW acoustic panel, type AFP Safety takes precedence. Especially Do you have an architect who is as For sound absorption and improved in connection with the tough fire demanding as the fire prevention regula- room acoustics, the ROMA type AFP prevention requirements, ROMA type tions? ROMA type FV insulating panels can acoustic panel with its stone wool FP wall panels with noncombustible satisfy architectural and safety require- insulating core and punched sheet stone wool insulating core are the ments. The noncombustible stone wool steel is the perfect solution. perfect solution. Whether for exterior insulating core is available in nine A layer of black fiberglass matting walls or extensions inside a building. different gauges. And the large selection between the stone wool and perfora- The specially developed joint geometry of materials and colors gives you even ted plate provides trickling protection. allows integration of sealing bands more choices. Give your imagination free The ROMA acoustic panels reduce while also ensuring a high degree of rein: Our intricate microprofiled and sound transmission from sources of airtightness and sealing against concealed fixing of the ROMA panels allow noise to the receiver. Already with the driving rain. ROMA sandwich panel a high degree of creativity in wall and AFP060 ROMA reaches the highest elements are also very lightweight façade design. sound absorbing class A. and easy to assemble. ROMA quick-assembly insulating panel for fire protection, soundproofing and thermal insulation The most modern production equipment Our two additional panel types FP+ and Insulating core allows ROMA to manufacture high quality FV+ offer you two product variants with Rock wool is a water-resistant, noncom- insulating panels, which ensure reliable greater mineral wool insulation density. bustible insulating material derived from fire protection for wall and façade These specialized panel types are the natural volcanic rock. The vertical systems. right choice for more demanding oriented processing of this insulating structural requirements. material allows high blocks and wide ROMA quick-assembly insulating panels, support intervals to be achieved. In the types FP and FV, are components whose Product properties basic version of the ROMA quick-assembly cover shells are connected with rock • Building material class A2-s1, d0 insulating panel, types FP and FV, the wool in a shear-resistant manner.
Load more

Recommended publications
  • Experimental Investigations of Using Silica Aerogel
    EXPERIMENTAL INVESTIGATIONS OF USING SILICA AEROGEL TO HARVEST UNCONCENTRATED SUNLIGHT IN A SOLAR THERMAL RECEIVER By Nisarg Hansaliya Sungwoo Yang Louie Elliott Assistant Professor of Chemical Engineering Assistant Professor of Mechanical (Chair) Engineering (Co-Chair) Prakash Damshala Professor (Committee Member) EXPERIMENTAL INVESTIGATIONS OF USING SILICA AEROGEL TO HARVEST UNCONCENTRATED SUNLIGHT IN A SOLAR THERMAL RECEIVER By Nisarg Hansaliya A Thesis Submitted to the Faculty of the University of Tennessee at Chattanooga in Partial Fulfillment of the Requirements of the Degree of Master of Science: Engineering The University of Tennessee at Chattanooga Chattanooga, Tennessee December 2019 ii ABSTRACT Significant demand exists for solar thermal heat in the mid-temperature ranges (120 oC – 220 oC). Generating heat in this range requires expensive optics or vacuum systems in order to utilize the diluted solar energy flux reaching the earth’s surface. Current flat plate solar collectors have significant heat losses and achieving higher temperatures without using concentrating optics remains a challenge. In this work, we designed a prototype flat plate collector using silica- aerogel. Optically Transparent Thermally Insulating silica aerogel with its high transmittance and low thermal conductivity is used as a volumetric shield. The prototype collector was subjected to ambient testing conditions during the months of winter. The collector reached the temperatures of 220 oC and a future prototype design is proposed to incorporate large aerogel monoliths for scaled up applications. This work opens up possibilities solar energy being harnessed in intermediate temperature range using a non-concentrated flat plate collector. iii DEDICATION This is dedicated to all the mentors, professors and teachers I have had the privilege to learn from.
    [Show full text]
  • Section 2: Insulation Materials and Properties
    SECTION 2 INSULATION MATERIALS AND PROPERTIES SECTION 2: INSULATION MATERIALS AND PROPERTIES 2.1 DEFINITION OF INSULATION 1 2.2 GENERIC TYPES AND FORMS OF INSULATION 1 2.3 PROPERTIES OF INSULATION 2 2.4 MAJOR INSULATION MATERIALS 4 2.5 PROTECTIVE COVERINGS AND FINISHES 5 2.6 PROPERTIES OF PROTECTIVE COVERINGS 6 2.7 ACCESSORIES 7 2.8 SUMMARY - INSULATION MATERIALS AND APPLICATION WITHIN THE GENERAL TEMPERATURE RANGES 8 2.9 INSULATION AND JACKET MATERIAL TABLES 10 MP-0 SECTION 2 INSULATION MATERIALS AND PROPERTIES SECTION 2 INSULATION MATERIALS AND PROPERTIES 2.1 DEFINITION OF INSULATION Insulations are defined as those materials or combinations of materials which retard the flow of heat energy by performing one or more of the following functions: 1. Conserve energy by reducing heat loss or gain. 2. Control surface temperatures for personnel protection and comfort. 3. Facilitate temperature control of process. 4. Prevent vapour flow and water condensation on cold surfaces. 5. Increase operating efficiency of heating/ventilating/cooling, plumbing, steam, process and power systems found in commercial and industrial installations. 6. Prevent or reduce damage to equipment from exposure to fire or corrosive atmospheres. 7. Assist mechanical systems in meeting criteria in food and cosmetic plants. 8. Reduce emissions of pollutants to the atmosphere. The temperature range within which the term "thermal insulation" will apply, is from -75°C to 815°C. All applications below -75°C are termed "cryogenic", and those above 815°C are termed "refractory". Thermal insulation is further divided into three general application temperature ranges as follows: A. LOW TEMPERATURE THERMAL INSULATION 1.
    [Show full text]
  • Technical Performance Overview of Bio-Based Insulation Materials Compared to Expanded Polystyrene
    buildings Article Technical Performance Overview of Bio-Based Insulation Materials Compared to Expanded Polystyrene Cassandra Lafond and Pierre Blanchet * Department of Wood and Forest Sciences, Laval University, Québec, QC G1V0A6, Canada; [email protected] * Correspondence: [email protected] Received: 5 February 2020; Accepted: 22 April 2020; Published: 26 April 2020 Abstract: The energy efficiency of buildings is well documented. However, to improve standards of energy efficiency, the embodied energy of materials included in the envelope is also increasing. Natural fibers like wood and hemp are used to make low environmental impact insulation products. Technical characterizations of five bio-based materials are described and compared to a common, traditional, synthetic-based insulation material, i.e., expanded polystyrene. The study tests the thermal conductivity and the vapor transmission performance, as well as the combustibility of the material. Achieving densities below 60 kg/m3, wood and hemp batt insulation products show thermal conductivity in the same range as expanded polystyrene (0.036 kW/mK). The vapor permeability depends on the geometry of the internal structure of the material. With long fibers are intertwined with interstices, vapor can diffuse and flow through the natural insulation up to three times more than with cellular synthetic (polymer) -based insulation. Having a short ignition times, natural insulation materials are highly combustible. On the other hand, they release a significantly lower amount of smoke and heat during combustion, making them safer than the expanded polystyrene. The behavior of a bio-based building envelopes needs to be assessed to understand the hygrothermal characteristics of these nontraditional materials which are currently being used in building systems.
    [Show full text]
  • Glass Wool] by Applying Coating on It
    International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 10, Number 1 (2017) © International Research Publication House http://www.irphouse.com Evaluating The Performance of Insulation Material [Glass wool] By Applying Coating on It. Utkarsh Patil. Assistance Professor, Department Of Mechanical Engineering D.Y.Patil College of Engineering and Technology, Kolhapur, Maharashtra. India. Viraj Pasare. Assistance Professor, Department Of Mechanical Engineering D.Y.Patil College of Engineering and Technology, Kolhapur, Maharashtra. India. Abstract: Keyword: A refrigerator is a popular household appliance that Domestic refrigeration system, Glass Wool, consists of a thermally insulated compartment and Polymethyl methacrylate (PMMA). a heat pump that transfers heat from the inside of the fridge to its external environment so that the inside of Introduction the fridge is cooled to a temperature below the ambient temperature of the room. Refrigeration is an Vapor-Compression Refrigeration or vapor- essential food storage technique. Insulating material compression refrigeration system (VCRS) in which is the one of the main sub systems. The primary the refrigerant undergoes phase changes, is one of the function of thermal insulating material used in many refrigeration cycles. It is also used in domestic domestic refrigerator is to reduce the transfer of heat. and commercial refrigerators, frozen storage of foods Hence the efficiency of the system is depends upon and meats, Refrigeration may be defined as lowering the temperature of an enclosed space by removing the on the insulating material use in the refrigerator. heat from that space and transferring it elsewhere.[3] [1]The insulating capability of a material is measured Insulating material is the one of the main sub with thermal conductivity (k).
    [Show full text]
  • The Miracle of Insulation in Hot-Humid Climate Building
    International Journal of Renewable Energy, Vol. 4, No. 1, January 2009 The Miracle of Insulation in Hot-Humid Climate Building Sarigga Pongsuwan Ph.D.Student, The Faculty of Architecture, Chulalongkorn University, Bangkok, Thailand Tel: +66-81-4436682, Fax: +66-2-2184373, Email: [email protected] Abstract Building is a climate modifier for humans. Most designers today focus on functions in the buildings and leave the issue of human comfort conditions to engineers who use mechanical systems to modify the interior environment. Energy and CO2 emissions are influencing factors in the global warming phenomenon. One alternative in the solution of these problems is reducing energy consumption by using insulation materials in the building envelope. Insulation materials provide many benefits to the building, such as reducing energy consumption, increasing comfort, ease of installation, light weight, and low cost. For instance, proper insulation in the roof should consider time lag, insulation property, condensation, and thermal bridge. As a result, the benefits include reduced cooling requirements up to 10 times that of a conventional building, and improving mean radiant temperature (MRT) by approximately 30% thereby increasing human comfort. The results show that properly installed insulation will save half of the cooling load from the building envelope. Keywords: Thermal insulation materials, Building envelope, Energy conservation, Comfort, Application, Guidelines 1. Introduction The buildings in cities usually use mechanical air-conditioning systems for thermal comfort in occupied spaces. This requires producing electrical energy to support the demand. This is an important factor contributing to CO2 in the environment which in turn raises temperatures, i.e. the Green House Effect and Heat Island.
    [Show full text]
  • Thermal Blanket Use Within a Generator System
    Information Sheet #96 THERMAL BLANKET USE WITHIN A GENERATOR SYSTEM Diesel and gaseous reciprocating engines are the most common power source to drive the generator in standby or prime power generator systems. As for any 4-stroke engine, less than 40% of the fuel energy burnt is converted to electrical power, apart from mechanical efficiencies, the rest of the fuel energy is converted to heat. Those responsible Buckeye Power Sales for designing and installing generator systems have to consider how to manage the heat generated as a result of engine Reliable Power Professionals Since 1947 combustion. 1.0 REASONS FOR USING A THERMAL BLANKET: There are two primary reasons for utilizing a thermal blanket. 1. To insulate the surrounding area from the heat being generated from engine combustion. 2. To insulate components within a generator system from extremely cold ambient air. Thermal blankets have insulation material to prevent radiated heat to the surrounding air and to lower heat loss due to cold ambient. 2.0 INSULATING THE SURROUNDING AREA FROM THE HEAT BEING GENERATED FROM ENGINE COMBUSTION (CONTINUED OVER): The heat generated from an internal combustion engine is managed by its cooling system. Water-cooled engines, the most commonly used prime movers in a generator system, discharge the coolant heat generated through a radiator sized to manage coolant flow. However, in addition to the heat expelled by the radiator there are several other sources of heat radiating to the engine surroundings, exhaust temperatures that can reach 1200°F (650°C), engine components such as the crankcase, cylinder heads, turbo chargers, oil-coolers, and water pumps, and electrical components.
    [Show full text]
  • Thermal Performance of a Passive House: Measurements and Simulation
    Thermal Performance of a Passive House: Measurements and Simulation Gulten Manioglu, PhD Veerle De Meulenaer Joris Wouters Hugo Hens, PhD Fellow ASHRAE ABSTRACT Energy efficiency in the built environment has become an important issue with global warming as one of the main drivers. An extreme example of lowering the energy consumption while still providing a good indoor environment for the occupants in residential construction are the so-called passive houses. Within the framework of the “Optimization of Extreme Low Energy and Pollution buildings” project, which studies low energy concepts for residential buildings from an economic, energy and envi- ronmental point of view, a recently constructed passive house in Belgium has been subjected to several measurements in order to verify and compare the achieved performance in situ with the predicted /calculated values. INTRODUCTION ventilation system and a highly efficient heat recovery, using a heat pump or a heat exchanger, minimizes ventilation losses. The term “Passive House” refers to a construction stand- ard that can be met using a variety of technologies, designs and Besides, by properly dimensioning and orienting the windows and by utilizing efficient exterior solar shading devices, solar materials. It is basically a refinement of the low energy concept. “Passive Houses” are buildings which assure a heat gains may be maximized in winter and maximized in summer (php, 2006). Table 1 quantifies some of the perform- comfortable indoor climate in summer and winter without the need of a conventional
    [Show full text]
  • Thermodynamic Processes in Nanostructured Thermocoatings
    XV International Conference on Durability of Building Materials and Components DBMC 2020, Barcelona C. Serrat, J.R. Casas and V. Gibert (Eds) Thermodynamic Processes in Nanostructured Thermocoatings David Bozsaky Department of Architecture and Building Construction, Faculty of Architecture, Civil Engineering and Transport Sciences, Széchenyi István University, H-9024 Győr, Hungary, Egyetem tér 1, [email protected] Abstract. In the 21st century, global climate change and the high level of fossil energy consumption have introduced changes affecting all sectors of the economy, including the building industry. This process has prompted EU members to create strict regulations in building energetics. It has become a serious task for architects to find more effective ways for thermal insulation. One of these options is the application of nanostructured materials. Among them nano-ceramic thermocoatings open a wide range of research fields, because complete agreement had not been already found about their insulating effect. In order to explore and describe the thermodynamic process inside nano-ceramic thermocoatings 6 series of heat transfer resistance experiments were performed in 2014-2018. Several building structure configurations with 12 different orders of layers were tested with a standard heat flow meter. On basis of these results it could be concluded that in case of nano-structured thermocoatings convective heat transfer coefficient might be taken account in different way than in case of traditional macro-structured thermal insulation materials. Based on research results, the limits of its applicability can also be concluded. It has also been found that the insulating effect of nanostructured thermocoatings depends on the material characteristics of the insulated surface.
    [Show full text]
  • Effects of Moisture on Thermal Insulation
    Effects of Moisture on Thermal Insulation Steve Badger, Ph.D. IDEA 2017 Sustaining Our Success 108th Annual Conference & Trade Show June 26-29 98% of Insulation System Failures are Moisture Related* • Insulation is a key to saving energy • In order for insulation to be effective it needs to remain as close to its manufactured state as possible. – Dry, uncompressed, fully intact • It is very easy for systems to be compromised and for water to be introduced • Care must be taken when selecting a system to achieve affective results. Both cold and hot systems are subject to moisture intrusion. *Thermal Conductivity of Wet Insulation Ludwig Adams - ASHRAE Journal Moisture Absorption in Thermal Insulation is Detrimental Because: • It affects heat gain that leads to increased energy consumption. • Wet insulation can lead to pipe support damage from excess weight. • Moisture deteriorates insulation and will ultimately lead to mold growth/other issues. • Corrosion under insulation (CUI) can lead to significant damage to a system’s pipe and equipment. Sources of Wet Insulation External Water Sources • Rainfall • Humidity • Ground water • Condensation falling from cold service equipment • Spray from fire sprinklers, deluge systems, wash-downs, etc. Internal Water Sources • Condensation from vapor drive (damaged vapor barrier) • Leaking pipe, flange, or valve • Insulation applied on wet pipe Thermal Conductivity Comparison Definition of Thermal Conductivity: The amount of heat transferred through a unit area of a material in a unit time, through a unit thickness, with a unit of temperature difference between the surface of the two opposite sides. K= Btu in/hr ft2 oF Thermal Conductivity & Moisture Water has a Thermal Conductivity of 4 BTU-in/hrft2F.
    [Show full text]
  • Floorquilt Is an Ultra Thin Thermal Insulation for Solid Floor Applications
    For project support and competitive prices call us now on 0844 99 100 44 www.ybsinsulation.com Multi-layer insulation blanket for floors FloorQuilt is an ultra thin thermal insulation for solid floor applications. FloorQuilt can be used to improve the thermal performance of your floor and ideal for use in combination with hot water underfloor heating systems. Resists the passage of moisture through floors Non degradable maintaining thermal performance and product integrity UK manufactured Improves the performance of the underfloor heating through uniform reflection of the heat generated Slim profile and high insulation values make it ideal for use where floor height is an issue Ultra Thin Profile Quick & Easy Reduces Impact Noise Resists Moisture Increasing available Project completion Unwanted noise reduced Resists the passage of living space time improved increasing living quality moisture through the floor FloorQuilt Uniformly can be used reflects the heat to enhance from the hot u-values in water underfloor both new build heating system and renovation back up into the projects. room FloorQuilt is Eliminates the fully flexible risk of thermal and easily cut bridging to fit, requires improving no specific PPE overall energy and is easy to performance transport For project support and competitive prices call us now on 0844 99 100 44 General Fixing Instructions Installation of FloorQuilt for solid floor applications and additional insulation products should be in accordance with the manufacturer’s fixing instructions and current good building practice. ▶ Ensure floor is clean and free from debris. ▶ Lay FloorQuilt directly to the solid floor surface, starting at the wall edge with a minimum of 100mm overlapping the wall edge.
    [Show full text]
  • Ablation Models of Thermal Protection Materials
    CHER YL L. RESCH ABLATION MODELS OF THERMAL PROTECTION MATERIALS Two materials have shown promise as thermal insulation for future missile rocket motor cases. These materials, DC 93-104 and Aflas, ablate and/or pyrolyze at temperatures encountered during flight. Because these reactions use energy, they cool the insulation when they occur. To calculate the temperature of the insulation, thermal and chemical effects must be considered. This article describes thermal, pyrolysis, and ablation models created for the two materials and validates the models using experimental data. INTRODUCTION Faster speeds and longer flight times of future missiles (Pyrolysis is a chemical reaction brought about by heat.) require external thermal protection of rocket motor cases After pyrolysis, a porous residue, or char, is left. The to prevent excessive propellent temperatures. Results surface of the char layer may then recede, a process from an investigation to determine the best material to known as ablation. This ablation model is one-dimen­ meet mi ssil e constraints of weight, volume, handling, sional. The different layers of material are split into storage, thermal conductivity, ablation, processing, and nodes, and a finite-difference approach is used to calcu­ cost indicate that DC 93- 104 and Aflas are promising as late the temperature change through the depth of the external insulation materials for future rocket motor cas­ system as modeled in Figure I. Surface shear is not es. 1 The DC 93-1 04 material is a silicone e lastomeric accounted for in this mode l. ablative material manufactured by Dow Corning, and CALCULATION OF SURFACE Aflas is a fluorine/carbon solid manufactured by Mosites Rubber Company.
    [Show full text]
  • Thermal Management and Fireproofing in Aerospace Ultra-Thin and Lightweight, Ultimate Performance Thermal Management and Firepro
    The leading reference Where to find us Cutting-edge engineering Global sales and technical support Promat’s environmentally-friendly fireproofing and insulation solutions are designed to meet the most rigorous Promat has 1,300 employees spread over 13 factories, 40 sales offices and 2 innovation centres worldwide. service requirements. They contain non-hazardous materials, are bio-soluble and have no negative impact on We are part of Etex Industry, a division of the Belgian industrial group Etex, specialised in the manufacturing the surroundings, equipment and components. and selling of building materials. Our engineered solutions are developed specifically for each project, using our extensive range of high quality materials covering temperatures from ambient to 1600 °C. We can provide prototypes or fully pre-installed Our sales offices solutions, and deliver small batches or set up high-volume production according to your specific requirements. Australia, Austria, Belgium, Brazil, Bulgaria, China, Chile, Columbia, Czech Republic, Denmark, France, Germany, Hong Kong, Hungary, India, Ireland, Italy, Japan, Kazakhstan, Lithuania, Malaysia, The Netherlands, Peru, Poland, Materials and brands Romania, Russia, Serbia, Singapore, Slovakia, South Africa, Slovenia, South Korea, Spain, Switzerland, UAE, UK, USA. Promat’s comprehensive product portfolio is synonymous with quality and reliability, offering a complete range of insulation and fireproofing solutions. We are committed to ongoing R&D, ensuring we remain at the cutting Contact us now edge of technology. Contact us for your requirements. We look forward to advising you on your projects. For our solutions in the aerospace industry we can choose from a wide range of materials and brands: high Etex Industry c/o Microtherm NV • Industriepark-Noord 1 • 9100 Sint-Niklaas • Belgium temperature textiles (DALFRATEX®), microporous (MICROTHERM®/AEROGUARD®) and intumescent materials +32 (0)3 760 19 80 • [email protected] (PROMASTOP®) insulation wools (PROMAGLAF®) and silicones (PROMASEAL®).
    [Show full text]