Paroc Marine and Offshore Products and Solutions

MARINE AND OFFSHORE PRODUCTS AND SOLUTIONS CONTENT

PAROC® Marine insulations meet all requirements...... 3 Fire insulation products ...... 4 Thermal insulation products ...... 5 Insulations for air ducts and pipes ...... 6 Special insulation solutions ...... 7 Paroc marine facings ...... 8 Technical data ...... 9 Sound absorption ...... 10 Paroc light marine fire protection solutions ...... 13 Light marine A-class steel decks and bulkheads ...... 13 Light marine A60 aluminium decks and bulkheads ...... 15 Light marine B15 extended wall...... 17 A-class steel decks and bulkheads fire protection solutions with slabs and mats ....18 H-class steel decks and bulkheads ...... 20 Engine rooms ...... 22 Air-conditioning machine rooms ...... 23 General applications ...... 24 Examples of latest Paroc Marine references ...... 25 Quality and environment ...... 26 Storage and handling ...... 26 Trusted service and advice ...... 27

Photos: Paroc and ©Kari Palsila

2 Marine and Offshore Products and Solutions PAROC® MARINE INSULATIONS MEET ALL REQUIREMENTS The shipbuilding industry sets very high requirements for safety and comfort on board. Products and constructions to be used for fire protection must be tested and approved according to the rules and regulations of IMO (International Maritime Organisation).

NON-COMBUSTIBILITY PAROC Marine Insulations meet the PAROC Marine insulations are manufactured from requirements of their users in the stone and the products have excellent properties following areas: as a passive guarantee of the fire safety of ships. • Fire protection of constructions and PAROC stone wool products are capable of components withstanding high temperatures. The determination of non-combustibility in • Heating economy of ships and comfort of their accordance with IMO FTP Code Part 1 has been passengers, heat and cold insulations performed for all PAROC Marine insulations. • Good acoustic properties of constructions and Continuous quality control of the products is devices performed by VTT (Technical Research Centre of • Insulation materials used as surface materials Finland). are functional and easy to clean • Meeting the requirements of Classification CONSTRUCTION APPROVALS Institutes and National Marine Authorities PAROC products have been tested in various A- and in accordance with the rules and regulations H-class deck and bulkhead constructions and in of IMO and the Marine Equipment Directive numerous fire door and panel constructions. (modules B and D).

Marine and Offshore Products and Solutions 3 FIRE INSULATION PRODUCTS

Fire insulation on ships must meet very high requirements. Paroc has tested several A-class constructions for aluminium and steel decks and bulkheads. Products are PAROC Marine Wired Mats and PAROC Marine Fire Slabs, both with and without facings. Plain insulation is used in facilities where it lies behind other constructions or in rooms, where it must be protected by steel sheets (i.e. against mechanical stress). A functional insulation solution for car decks and engine rooms can be achieved using pre-coated slabs and preformed insulations. Coated products ensure a clean and easily maintained final surface. The range of facings includes glass fibre cloths 50–400 g/m2 and aluminium foils. The quick and easy installation of coated fire insulation ensures considerable cost savings. Coated products also enable using more lightweight overall solutions than before. For the user this means more quiet and comfortable working facilities.

PAROC Marine Navis Slab 60 PAROC Marine Navis Mat 60 PAROC Marine Navis Wired Mat 60 • decks and bulkheads in steel • Decks and bulkheads in steel • Decks and bulkheads in steel constructions constructions constructions • Air-conditioning devices and ducts • PAROC Marine Navis Mat 60 is also • PAROC Marine Navis Wired Mat 60 • Products with facing especially for available with AluCoat facing is also available with AluCoat facings car decks, engine rooms and air- and glass fibre cloths conditioning machine rooms

PAROC Marine Fire Slab 100 PAROC Marine Navis Mat 90 PAROC Marine Navis Wired Mat 90 • Decks and bulkheads in steel and • Decks and bulkheads in aluminium • Decks and bulkheads in aluminium aluminium constructions constructions constructions • Fire doors • PAROC Marine Navis Mat 90 is also • PAROC Marine Navis Mat 90 is also • Wall cassettes available with AluCoat facing available with AluCoat facing and • Air-conditioning devices and ducts glass fibre cloths • Products with facing especially for car decks, engine rooms and air- PAROC Marine Wired Mat 100 conditioning machine rooms • Decks and bulkheads in steel and aluminium constructions • Circular ducts • Products with facing above suspended ceilings and in maintenance facilities

The product is also available without the net.

4 Marine and Offshore Products and Solutions THERMAL INSULATION PRODUCTS

Thermal insulation together with fire and sound insulation create the basis for comfort on board. By choosing the right thermal insulation solutions, the optimum indoor climate temperature and energy savings can be achieved. In addition, the excellent acoustic properties of PAROC stone wool can by utilized. In shipbuilding plain thermal insulation is used in facilities where it lies behind other constructions. Coated slabs and mats are used as thermal insulation above suspended ceilings and in facilities where they remain visible. The range of facings includes several alternatives from alumium foil to glass fibre cloths.

PAROC Marine Wired Mat 30 PAROC Marine Mat 30 AluCoat PAROC Marine Slab 30, 40, 60 • Decks, bulkheads and outer bulkheads • Thermal and condensation • Various applications • Products with facing above suspended insulation of ducts and devices • Devices and tanks with flat surfaces ceilings and in facilities where they • Sound insulation above suspended remain visible ceilings • Machinery and devices with • With aluminium foil as condensation temperature ≤200° insulation and in applications where • Only available with AluCoat, G4 and G7 thick insulation is required facings • Products with facing in facilities where they remain visible • Machinery and devices

PAROC Marine Wired Mat 40 • Decks, bulkheads and outer bulkheads • Products with facing above suspended ceilings and in facilities where they remain visible • Machinery and devices with temperature ≤200°

Marine and Offshore Products and Solutions 5 INSULATIONS FOR AIR DUCTS AND PIPES

PAROC products ensure the comfort, safety and economic efficiency of duct and pipe insulations on board. Several facing options, fit to size pipe sections and a wide range of mats enable easy and fast installation and prepare the way for the optimum end solution. PAROC Marine Wired Mats are made of stone wool and are used as thermal insulation for smoke ducts and chimneys on ships. If required, the wire net can also be made of stainless steel with a higher temperature resistance than galvanized wire netting. Depending on the application of the PAROC Section, it can also be produced with aluminium foil or glass fibre cloth. Thermal and condensation insulations for air- conditioning devices are coated with aluminium foil reinforced with glass fibre. These products are ideal for the insulation of rectangular and round ducts.

PAROC Hvac Section AluCoat T PAROC Pro Section 100 PAROC Pro Section 100 G4 PAROC Hvac Combi AluCoat T • Steam pipes • Thermal and condensation • Thermal and condensation • Heating pipes insulation of pipes and ducts insulation of pipes and ducts • Fuel oil pipes • For applications requiring excellent • Tape in the longitudinal seam • Exhaust gas pipes durability from the facing e.g. on car • Surface temperature of the facing • Sprinkler pipes decks, engine rooms and passages. must not exceed 80 °C • Deck pipes • The product can also be • Sewage pipes manufactured with aluminium foil on • Maximum service temperature 640 °C. top (facing G7). The overlapping of • The product can also be manufactured these facings can be heat sealed. with a density of 140 kg/m3 (PAROC Pro Section 140).

PAROC Marine Wired Mat 100 and PAROC Pro Lamella Mat AluCoat PAROC Marine Mat 30 AluCoat PAROC Marine Wired Mat 100 AluCoat • Thermal and condensation • Thermal and condensation • Smoke ducts and chimneys insulation of ducts insulation of ducts and devices • Exhaust gas dampers • For applications where higher • Large pipe elbows compressive strength is required • Penetrations of air ducts

6 Marine and Offshore Products and Solutions SPECIAL INSULATION SOLUTIONS

Many kinds of prefabricated products, for example insulations for cabins, panels, fire doors and ventilation machinery are used in the shipbuilding industry. Manufacturers of these products often require customer-specified and tailored solutions. The purpose of PAROC Marine insulations is to offer a solution for every part of the ship where some kind of insulation is needed. Our range of products also covers the insulating materials needed by subcontractors within shipbuilding.

PAROC Marine Slabs PAROC Marine Slab 220 And • Wall panels and cassettes PAROC Marine Slab 250 • Suspended ceiling panels • Ship cabin constructions and • Floating floors cassettes • As lamellas in wall and floor panels • Sound reduction panels • Fire doors • Draught barriers • Doors, wall and ceiling panels Products: • PAROC Marine Slab 130 • PAROC Marine Floor Slab 140 • PAROC Marine Fire Slab 150 • PAROC Marine Slab 160 • PAROC Marine Slab 180

Marine and Offshore Products and Solutions 7 PAROC MARINE FACINGS

AluCoat Reinforced aluminium foil facing, 62–80 g/m2 AluCoat T Reinforced aluminium foil facing with tape on the longitudinal seam, available only on pipe sections, 62–80 g/m2 G1 White glass fibre facing, ~210 g/m2 G2 Black glass fibre facing, ~200 g/m2 G3 White glass fibre facing, ~430 g/m2 G4 White glass fibre facing with aluminium below, ~250 g/m2 G7 White glass fibre facing with aluminium on top, ~250 g/m2 N1 Grey non-woven tissue, ~50 g/m2 N3 Black non-woven tissue, ~60 g/m2 N5 Grey non-woven tissue, ~60 g/m2 N8 Grey non-woven tissue, ~125 g/m2.

AluCoat AluCoat T G1 G2

G3 G4 G7 N1

N3 N5 N8

8 Marine and Offshore Products and Solutions TECHNICAL DATA

Stone Wool Mats Thermal conductivity (W/mK) Nominal Compressive stress Mean temperature 3) density (10% deformation) Product kg/m3 kPa 10°C 50°C 100°C 200°C 300°C

PAROC Marine Wired Mat 30 30 0.037 PAROC Marine Wired Mat 40 40 0.036 PAROC Marine Wired Mat 80 80 0.036 0.040 0.046 0.064 0.089 PAROC Marine Navis Mat 60 60 0.032 0.038 0.045 0.063 0.086 PAROC Marine Navis Mat 90 90 0.039 0.042 0.047 0.063 0.083 PAROC Marine Navis Wired Mat 60 60 0.032 0.038 0.045 0.063 0.086 PAROC Marine Navis Wired Mat 90 90 0.039 0.042 0.047 0.063 0.083 PAROC Marine Wired Mat 100 100 0.039 0.042 0.047 0.063 0.083 PAROC Pro Lamella Mat AluCoat 50 0.039 0.045 0.055 0.081 PAROC Marine Mat 30 30 0.036 PAROC Marine Mat 30 AluCoat 30 0.036 PAROC Marine Mat 35 35 0.036 PAROC Marine Mat 35 AluCoat 35 0.036

Stone Wool Slabs Thermal conductivity (W/mK) Nominal Compressive stress Mean temperature 3) density (10% deformation) Product kg/m3 kPa 10°C 50°C 100°C 200°C 300°C 400°C 500°C 600°C

PAROC Marine Slab 30 30 0.039 0.042 0.054 0.085 0.132 PAROC Marine Slab 40 40 1 0.037 0.042 0.054 0.085 PAROC Marine Slab 60 60 3 0.037 0.042 0.048 0.067 PAROC Marine Navis Slab 60 60 5 0.032 0.038 0.045 0.063 0.086 0.116 0.153 PAROC Marine Navis Slab 100 100 10 0.043 0.047 0.065 0.095 0.138 0.196 PAROC Marine Slab 80 80 10 0.037 0.043 0.047 0.065 0.095 0.138 0.196 PAROC Marine Fire Slab 80 80 10 0.037 0.043 0.047 0.065 0.095 0.138 0.196 PAROC Marine Fire Slab 100 100 10 0.037 0.043 0.047 0.065 0.095 0.138 0.196 PAROC Marine Slab 130 130 20 0.042 0.046 0.060 0.081 0.110 0.147 0.192 PAROC Marine Fire Slab 150 150 20 0.042 0.046 0.060 0.081 0.110 0.147 0.192 PAROC Marine Slab 160 160 40 0.039 0.042 0.046 0.060 0.081 0.110 0.147 0.192 PAROC Marine Slab 180 180 50 0.039 0.042 0.046 0.060 0.081 0.110 0.147 0.192 PAROC Marine Slab 220 220 60 0.047 0.050 0.058 0.071 0.087 0.107 0.131 PAROC Marine Slab 250 250 80 0.047 0.050 0.058 0.071 0.087 0.107 0.131

Stone Wool Pipe Sections Thermal conductivity (W/mK) Mean temperature 3) Product 10°C 50°C 100°C 150°C 200°C 300°C 400°C

PAROC Hvac Section AluCoat T 0.034 0.037 0.044 0.053 0.063 --- PAROC Pro Section 100 0.040 0.046 0.064 0.092 PAROC Pro Section 140 0.042 0.047 0.065 0.087 0.115

See product data sheets for dimensions and other information.

Marine and Offshore Products and Solutions 9 SOUND ABSORPTION*

Values tested in accredited testing laboratories according to EN ISO 354:2003 and EN ISO 11654:1997.

PAROC Marine Navis Slab 60 PAROC Marine Navis Slab 60 G1

Absorption ratio Absorption ratio 30 mm 30 mm 40 mm 40 mm 50 mm 70 mm 50 mm

80 mm 70 mm 140 mm 100 mm

Frequency Frequency

PAROC Marine Navis Wired Mat 60 G1 PAROC Marine Navis Wired Mat 90

Absorption ratio Absorption ratio 30 mm 60 mm 40 mm 70 mm 50 mm

60 mm

70 mm

Frequency Frequency

PAROC Marine Navis Wired Mat 90 AluCoat PAROC Marine Navis Wired Mat 90 G7

Absorption ratio Absorption ratio

60 mm 60 mm

70 mm 70 mm

Frequency Frequency

PAROC Marine Navis Mat 90 PAROC Marine Navis Mat 90 AluCoat

Absorption ratio Absorption ratio 60 mm 60 mm

70 mm 70 mm

Frequency Frequency

* The following sound attenuation measurements are done by certified Laboratories.

10 Marine and Offshore Products and Solutions Values tested in accredited testing laboratories according to EN ISO 354:2003 and EN ISO 11654:1997.

PAROC Marine Slab 40 PAROC Marine Slab 40 G3 Absorption ratio Absorption ratio 50 mm 50 mm

100 mm 100 mm

Frequency Frequency

PAROC Marine Fire Slab 100 PAROC Marine Fire Slab 100 G1**

Absorption ratio Absorption ratio

25 mm 25 mm

50 mm 50 mm

75 mm 75 mm

100 mm 100 mm

Frequency Frequency

PAROC Marine Wired Mat 100 PAROC Marine Wired Mat 100 G1

Absorption ratio Absorption ratio

30 mm 30 mm

50 mm 50 mm

80 mm 80 mm

100 mm 100 mm

Frequency Frequency

PAROC Marine Slab 130 PAROC Marine Slab 160

Absorption ratio Absorption ratio 25 mm 25 mm

50 mm 50 mm

100 mm 100 mm

Frequency Frequency

* The following sound attenuation measurements are done by certified Laboratories. ** Estimated values based on existing results.

Marine and Offshore Products and Solutions 11 Values tested in accredited testing laboratories according to EN ISO 354:2003 and EN ISO 11654:1997.

PAROC Marine Floor Slab 140 PAROC Marine Slab 220

Absorption ratio Absorption ratio

50 mm 15 mm

30 mm

Frequency Frequency

Weighted Absorp- Weighted Absorp- Product absorption tion Product absorption tion

‌α w class ‌α w class PAROC Marine Navis Slab 60, 30 mm 0.65 (MH) C PAROC Marine Navis Mat 60, 60 mm 1 A PAROC Marine Navis Slab 60, 40 mm 0.75 (MH) C PAROC Marine Navis Mat 90, 60 mm 1 A PAROC Marine Navis Slab 60, 50 mm 0.95 A PAROC Marine Navis Mat 90, 70 mm 1 A PAROC Marine Navis Slab 60, 60 mm 1.00 A PAROC Marine Navis Mat 90 AluCoat, 60 mm 0,65(LM) C PAROC Marine Navis Slab 60, 70 mm 1.00 A PAROC Marine Navis Mat 90 AluCoat, 70 mm 0,65 C PAROC Marine Navis Slab 60, 80 mm 1.00 A PAROC Marine Fire Slab 100, 25 mm 0.55 D PAROC Marine Navis Slab 60, 140 mm 1.00 A PAROC Marine Fire Slab 100, 50 mm 1.00 A PAROC Marine Navis Slab 60 AluCoat, 50 mm 0,75 C PAROC Marine Fire Slab 100, 75 mm 1.00 A PAROC Marine Navis Slab 60 G1, 30 mm 0,65 C PAROC Marine Fire Slab 100, 100 mm 1.00 A PAROC Marine Navis Slab 60 G1, 40mm 0,55(LM) D PAROC Marine Fire Slab 100 G1, 25 mm 0.75 C PAROC Marine Navis Slab 60 G1, 50 mm 0,7 C PAROC Marine Fire Slab 100 G1, 50 mm 0.75 C PAROC Marine Navis Slab 60 G1, 60 mm 0,55(LM) D PAROC Marine Fire Slab 100 G1, 75 mm 0.70 C PAROC Marine Navis Slab 60 G1, 70mm 0,45(LM) D PAROC Marine Fire Slab 100 G1, 100 mm 0.70 C PAROC Marine Navis Slab 60 G1, 100mm 0,50(LM) D PAROC Marine Slab 40, 50 mm 0.85 (H) B PAROC Marine Navis Slab 60 G3, 50 mm 0,95 A PAROC Marine Slab 40, 100 mm 1.00 A PAROC Marine Navis Slab 60 G4, 50 mm 0,30(LM) D PAROC Marine Slab 40 G3, 50 mm 0.70 (L) C PAROC Marine Navis Slab 60 G7, 50 mm 0,30(LM) D PAROC Marine Slab 40 G3, 100 mm 0.70 (L) C PAROC Marine Navis Wired Mat 60, 50 mm 0,80(H) B PAROC Marine Slab 130, 25 mm 0.50 (HH) D PAROC Marine Navis Wired Mat 60 AluCoat, 50 mm 0,85 B PAROC Marine Slab 130, 50 mm 0.85 (H) B PAROC Marine Navis Wired Mat 60 G1, 30 mm 0,75(M) C PAROC Marine Slab 130, 100 mm 0.85 (H) B PAROC Marine Navis Wired Mat 60 G1, 40 mm 0,75 C PAROC Marine Slab 160, 25 mm 0.50 (MH) D PAROC Marine Navis Wired Mat 60 G1, 50 mm 0,75 C PAROC Marine Slab 160, 50 mm 0.85 (H) B PAROC Marine Navis Wired Mat 60 G1, 60 mm 0,75 C PAROC Marine Slab 160, 100 mm 0.80 (H) B PAROC Marine Navis Wired Mat 60 G1, 70 mm 0,75 C PAROC Marine Floor Slab 140, 50 mm 0.90 (H) A PAROC Marine Navis Wired Mat 60 G4, 50 mm 0,50(LM) D PAROC Marine Slab 220, 15 mm 0.90 (MH) D PAROC Marine Navis Wired Mat 60 G7, 50 mm 0,50(LM) D PAROC Marine Slab 220, 30 mm 0.70 (H) C PAROC Marine Navis Wired Mat 90 G4, 60 mm 0,55(LM) D PAROC Marine Wired Mat 100, 30 mm 0.80 (H) B PAROC Marine Navis Wired Mat 90 G4, 70 mm 0,55 D PAROC Marine Wired Mat 100, 50 mm 1.00 A PAROC Marine Navis Wired Mat 90 G7, 60 mm 0,55(LM) D PAROC Marine Wired Mat 100, 80 mm 1.00 A PAROC Marine Navis Wired Mat 90 G7, 70 mm 0,55 D PAROC Marine Wired Mat 100, 100 mm 1.00 A PAROC Marine Navis Wired Mat 90, 60 mm 1 A PAROC Marine Wired Mat 100 G1, 30 mm 0.80 B PAROC Marine Navis Wired Mat 90, 70 mm 1 A PAROC Marine Wired Mat 100 G1, 50 mm 0.75 C PAROC Marine Navis Wired Mat 90 AluCoat, 60 mm 0,9 A PAROC Marine Wired Mat 100 G1, 80 mm 0.70 C PAROC Marine Navis Wired Mat 90 AluCoat, 70 mm 0,9 A PAROC Marine Wired Mat 100 G1, 100 mm 0.70 C PAROC Marine Navis Wired Mat 90 G1, 60 mm 0,65(L) C The letters connected to the weighted absorption value (L, M, H) are PAROC Marine Navis Wired Mat 90 G1, 70 mm 0,7 C spectrum indicators according to ISO 11654 where L = Low frequency, M = Middle frequency, and H = High frequency.

12 Marine and Offshore Products and Solutions PAROC LIGHT MARINE FIRE PROTECTION SOLUTIONS PAROC Light Marine are new lightweight solutions for fire insulated decks and bulkheads, suited for weight critical projects. Read more about PAROC Light Marine solutions on www.paroc.com/lightmarine.

BENEFITS • Financial benefits • Lower operating costs • Reduced weight • Increased speed • Lower fuel consumption • Decrease in emissions

LIGHT MARINE A-CLASS STEEL DECKS AND BULKHEADS Paroc’s lightweight solutions for A-class steel decks and bulkheads can be done with one product or combining slabs and mats. The density and the thickness is always the same, no matter which products are used. The new solutions are easiest to design and install on market.

MULTIPLE COMBINATIONS All below mentioned products are approved for A-class steel decks and bulkheads. Products can be used in different combinations, also combining slabs and mats in same application. • PAROC Marine Navis Slab 60 (can be covered with facings: AluCoat, G1, G2, G3, G4, G7 and LF1) • PAROC Marine Navis Mat 60 (facings: AluCoat) • PAROC Marine Navis Wired Mat 60 (facings: AluCoat, G1, G2, G4, G7 and LF1)

level / stiffener

Nominal density Insulating thickness Weight Sound reduction Rw Class kg/m3 mm kg/m2 (C, Ctr), dB Steel Decks - Navis Slabs or Mats A60 60 50/30 3,0/1,8 47 (-1, -6) A30 60 30/30 1,8/1,8 46 (-2, -6) 30/0 A15 60 1,8/0 45 (-1, -5) (no installation stiffeners) Steel Bulkheads - Navis Slabs or Mats A60 60 60/30 3,6/1,8 47 (-1, -6) A30 60 40/30 2,4/1,8 47 (-2, -6) 30/0 A15 60 1,8/0 45 (-1, -5) (no installation stiffeners) Floating Floor - PAROC Marine Floor Slab 140 50 A60 140 7,0 45 (-2. -7) (no steel plates on top) 50 A60 140 (3,0 mm steel plates 7,0 52 (-3, -8) on top)

Marine and Offshore Products and Solutions 13 ONLY ONE DENSITY - SEVERAL INSTALLATION POSSIBILITIES

Mats ands slabs can be used in the same installation in various combinations. The density and the thickness is always the same, no matter which products are used. Below are just a few examples.

Mat on stiffeners, slabs between stiffeners

ADVANTAGES LIGHT MARINE A-CLASS STEEL SOLUTIONS • Up to 40% weight reduction • Only 1 density - several installation possibilies • Easy design • Effi cient logistics • Always the same thickness on stiffeners • Flexible installation

Slab installation Wired mat installation

Alternative stiffener installation Continuous wired mat installation

A15 installation

14 Marine and Offshore Products and Solutions LIGHT MARINE A60 ALUMINIUM DECKS AND BULKHEADS

ADVANTAGES LIGHT MARINE A60 ALUMINIUM SOLUTIONS • 40 % lighter solutions

1 • Solutions for 4 mm and 6 mm aluminium constructions • Also for restricted bulkheads • Easy design • Efficient logistics 2 • Flexible installation

Notice! PAROC Marine Navis Mats can be covered with aluminium foil. PAROC Marine Navis Wired Mats can be covered with aluminium foil or with black or white glass fiber clothing. Maximum distance between the pins is 300 mm.

Nominal density Insulating Weight Class Product kg/m3 thickness, mm kg/m2 Solutions for 6 mm Aluminium Constructions: 1 A60 Aluminium Deck PAROC Marine Navis Mat 60 60 60 3,6

A60 Aluminium Bulkhead PAROC Marine Navis Mat 60 60 60 3,6 + 3,6 on both sides A60 Aluminium Bulkhead restricted PAROC Marine Navis Mat 60 60 60 3,6

Solutions for 4 mm Aluminium Constructions: 2 A60 Aluminium Deck PAROC Marine Navis Mat 90 90 60 5,4

A60 Aluminium Bulkhead PAROC Marine Navis Mat 90 90 70 6,3 + 6,3 on both sides

Marine and Offshore Products and Solutions 15 ONLY ONE DENSITY, ONE THICKNESS AND ONE INSULATION LAYER NEEDED Paroc lightweight solutions for 6 mm thick A60 aluminium constructions are based on only product PAROC Marine Navis Mat 60. Insulating thickness on both decks and stiffeners is 60 mm which makes the design less complex. The installation work is easier with a lighter product and only one insulation layer is needed for all constructions. This solution is available also for restricted bulkheads.

A60 Aluminium Deck A60 Aluminium Bulkhead

Insulating thickness on level and on Insulating thickness on level and on 60 60 stiffener (mm) stiffener (mm)

Weight kg/m2 3,6 Weight kg/m2 3,6 + 3,6

A60 Aluminium Bulkhead Restricted

Insulating thickness on level and on 60 stiffener (mm)

Weight kg/m2 3,6

A60 ALUMINIUM SOLUTIONS FOR 4 MM ALUMINIUM CONSTRUCTIONS Paroc lightweight solutions for 4 mm thick A60 aluminium constructions are based on only one product PAROC Marine Navis Mat 90 in two thicknesses; 60 mm on decks and 70 mm on bulkheads.

A60 Aluminium Deck A60 Aluminium Bulkhead

Insulating thickness on level and on Insulating thickness on level and on 70 60 stiffener (mm) stiffener (mm) on both sides

Weight kg/m2 5,4 Weight kg/m2 6,3 + 6,3

16 Marine and Offshore Products and Solutions LIGHT MARINE B15 EXTENDED WALL The new 40% lighter solution for B15 wall extension is easy and flexible to make. Duct and pipe penetrations are included in the solution.

EASY DESIGN Installation video available on The new lightweight wall extension solution has www.paroc.com/lightmarine more variety and flexibility in design and installation. Either fire springs or pins and washers are used for fixing. Product used for the solution, PAROC Marine Navis Slab 100 AluCoat is rigid enough to make a perfect wall extension without support structures.

PENETRATIONS INCLUDED Penetrations can be carried out easily because the product used in the extension is only 30 mm thick. Penetrations are insulated on one side of the wall with a 250 mm-long piece of PAROC Marine Navis Wired Mat 60 AluCoat, 40 mm. Several different types of pipe and duct penetrations as well as steel cable ladder can be used in the solution. Pipes approved for penetration are copper, stainless steel and PVC-C pipes. Circular ducts of thickness 0,6 mm with outer diameter 80–160 mm and rectangular ducts in size 100x200 mm to 250x480 mm are approved for the penetrations. Pipe and duct penetration details available on www.paroc.com/lightmarine

BENEFITS • More variety and flexibility for making B15 wall extension • Fix with fire springs or pins and washers • Solutions with pipe and duct penetration included • Maximum height of the wall extension even up to 2,2 m • No support structures needed • Only one product PAROC Marine Navis Slab 100 AluCoat needed for the wall extension • Only one product PAROC Marine Navis Wired Mat 60 needed for penetration • No additional sealing is required for the penetrations when insulation is cut correctly with no gaps around penetrations. • Steel profile can be fixed directly on the deck or on the insulated deck

Marine and Offshore Products and Solutions 17 A-CLASS STEEL DECKS AND BULKHEADS

FIRE PROTECTION SOLUTIONS WITH SLABS AND MATS

1 Notice! PAROC Marine Fire Slabs can be covered with aluminium foil or with black or white glass fibre facing.

2 Notice! Only rule for pinning is that the maximum distance between the pins is 300 mm.

Notice! PAROC Marine Fire Slab 100 can be replaced with PAROC Marine Wired 3 Mat 100 or PAROC Marine Mat 100. Please note that minimum thickness of mat products is 30 mm.

Nominal density Insulating thickness Sound reduction R Class Product w kg/m3 level/stiffener, mm* (C, Ctr), dB Steel Decks: 1 A60 PAROC Marine Fire Slab 100 100 40/25 47 (-2, -6) A30 PAROC Marine Fire Slab 100 100 25/25 45 (-1, -4) A15 PAROC Marine Fire Slab 80 80 40/0 45 (-1, -4) Steel Bulkheads: 2 A60 PAROC Marine Fire Slab 100 100 60/25 49 (-1, -6) A30 PAROC Marine Fire Slab 100 100 40/25 47 (-2, -6) A15 PAROC Marine Fire Slab 80 80 40/0 45 (-1, -4) Floating Floor:

50 3 A60 PAROC Marine Floor Slab 140 140 45 (-2, -7) (no steel plates on top)

50 A60 PAROC Marine Floor Slab 140 140 52 (-3, -8) (3,0 mm steel plates on top) 25+25 A60 PAROC Marine Slab 220 220 44 (-1, -5) (no steel plates on top) 25+25 A60 PAROC Marine Slab 220 220 52 (-2, -7) (3,0 mm steel plates on top)

* Please check validity of the certification from Paroc sales.

18 Marine and Offshore Products and Solutions Steel Decks A60, A30 and A15

Example of A60 class solution for steel deck with PAROC Example of A30 class solution for steel deck with PAROC Marine Fire Slab 100 G1 and preformed block PAROC Marine Marine Fire Slab 100 G1 and preformed block PAROC Marine Fire Slab 100 G1, HPL. Insulating thickness on deck is 40 mm Fire Slab 100 G1, HPL. Insulating thickness on deck and and on stiffener 25 mm. stiffener is 25 mm.

Steel Bulkheads A60, A30 And A15

Example of A60 class solution for steel bulkhead with Example of A30 class solution for steel bulkhead with PAROC Marine Fire Slab 100. Insulating thickness on PAROC Marine Fire Slab 100. Insulating thickness on bulkhead is 60 mm and on stiffener 25 mm. bulkhead is 40 mm and on stiffener 25 mm. PAROC Marine Fire Slab 100, 25 mm on the stiffeners can be replaced by PAROC Marine Wired Mat 100, 30 mm.

Floating Floor Steel Bulkhead A60 Corrugated

40 mm - 90 mm (Depth of the corrugation) 120 mm - 300 mm (Flange width)

Example of A60 floating floor solution for steel deck with PAROC Marine Floor Slab 140, thickness min 50 mm or PAROC Marine Slab 220 thikness 25+25 mm. Slabs are covered by one layer of min. 3 mm steel sheets spot welded or screwed together (pitch max 300 mm) by means of min. Example of A60 solution for corrugated steel bulkhead with 1,5 mm thick steel flats having width of min. 100 mm. PAROC Marine Fire Slab 100, thickness 40+40 mm. • Thickness of the corrugated steel is minimum 2 mm. • Depth of corrugation can be varied from 40 mm to 90 mm. • Flange width from 120 mm to 300 mm. • Pins are fastened to the top flange of the corrugation. • Maximum distance to the nearest pin is 300 mm.

Marine and Offshore Products and Solutions 19 H-CLASS STEEL DECKS AND BULKHEADS

Notice! PAROC Marine Fire Slab 100 can be covered with aluminium foil or with black or white glass fibre clothing.

Class Product Nominal density Insulating thickness kg/m3 level/stiffener, mm Steel Decks: H120 PAROC Marine Fire Slab 100 100 60 + 60/60 + 60 H60 PAROC Marine Fire Slab 100 100 45 +45/45 + 45 Steel Bulkheads: H120, restricted, fire against insulated side PAROC Marine Fire Slab 100 100 60 + 60/60 + 60 H60, restricted, fire against insulated side PAROC Marine Fire Slab 100 100 50 + 50/50 + 50

20 Marine and Offshore Products and Solutions Steel Deck H120 Steel Deck H60

Example of H120 class solution for steel decks with PAROC Example of H60 class solution for steel decks with PAROC Marine Fire Slab 100, insulating thickness on deck and Marine Fire Slab 100, insulating thickness on deck and stiffener is 60 + 60 mm. stiffener is 45 + 45 mm.

Steel Bulkhead H120, Restricted, Steel Bulkhead H60, Fire Against Insulated Side Restricted, Fire Against Insulated Side

Example of H120 class solution for steel bulkheads with Example of H60 class solution for steel bulkheads with PAROC Marine Fire Slab 100 G1, insulating thickness on PAROC Marine Fire Slab 100 G1, insulating thickness on bulkhead and stiffener is 60 + 60 mm. bulkhead and stiffener is 50 + 50 mm.

Marine and Offshore Products and Solutions 21 ENGINE ROOMS

2 5

Class Product Nominal density Insulating thickness kg/m3 level/stiffener, mm Decks: PAROC Marine Navis Slab 60 1 A60 60 50/30 + white glass fibre facing Bulkheads: PAROC Marine Navis Slab 60 2 A60 60 70/30 + white glass fibre facing Pipes (Vapour, Heating, Fuel Oil, Sewage, Warm Water, Etc.): 3 PAROC Pro Section 100 G4 or G7 100

4 PAROC Marine Wired Mat 100 100 80 Exhaust Pipe Dampers: 5 PAROC Marine Wired Mat 100 100 80/80

22 Marine and Offshore Products and Solutions AIR-CONDITIONING MACHINE ROOMS

Class Product Nominal density Insulating thickness kg/m3 level/stiffener, mm* Decks: PAROC Marine Slab 40 1 A0 60 50/50 + white glass fibre facing Bulkheads: PAROC Marine Wired Mat 40 2 A0 60 50/50 + white glass fibre facing Air Conditioning Ducts: 3 PAROC Pro Lamella Mat AluCoat 100 25 Pipes (Cooling and Cold Water): PAROC Hvac Section AluCoat T or 4 100 20–50 PAROC Hvac Combi AluCoat T

Marine and Offshore Products and Solutions 23 GENERAL APPLICATIONS

2 1

5 8

6 9 4

3 7

Class Product Nominal density Insulating thickness kg/m3 level/stiffener, mm* Decks: 1 A60 PAROC Marine Navis Slab 60 60 50/30 1 A60 PAROC Marine Fire Slab 100 100 40/25 PAROC Marine Navis Slab 60 2 A60 60 50/30 + black glass fibre facing PAROC Marine Fire Slab 100 2 A60 100 40/25 + black glass fibre facing Bulkheads: 3 Thermal PAROC Marine Wired Mat 40 40 50 - 100/50 - 100 Thermal PAROC Marine Slab 40 40 50/50 Cabin: 4 PAROC Marine Slab 150 Wall B15** 150 10 + grey non-woven tissue Roof 5 B15** PAROC Marine Slab 80 80 70 Door 6 B15** PAROC Marine Slab 160 160 40 Corridor: Wall 7 B15** PAROC Marine Slab 160 160 15 Roof 8 Sound PAROC Marine Slab 80 80 25 Door 9 A60** PAROC Marine Slab LO 150 150 70 Wall PAROC Marine Navis Slab 100 10 B15 100 30 extension AluCoat Floating Floor: 11 A60 PAROC Marine Floor Slab 140 140 50

*Please check the validity of the certification from Paroc sales. ** An example of customer constructions where PAROC products are used.

24 Marine and Offshore Products and Solutions Examples of latest Paroc Marine references

Name Type Year Shipyard Country Mein Schiff 2 Cruise Ship 2019 Meyer, Turku Finland MSC Bellissima Cruise Ship 2019 Chantiers de l’Atlantique France MSC Grandiosa Cruise Ship 2019 Chantiers de l’Atlantique France Costa Venezia Cruise Ship 2019 Fincantieri, Monfalcone Italy Carnival Panorama Cruise Ship 2019 Fincantieri, Marghera Italy Sky Princess Cruise Ship 2019 Fincantieri, Castellammare/Monfalcone Italy MSC Seashore Cruise Ship 2019 Fincantieri, Monfalcone Italy Scarlet Lady Cruise Ship 2019 Fincantieri, La Spezia/ Castellammare Italy Hondius 484 Polar Expedition 2019 Brodosplit, Split Croatia Mein Schiff 1 Cruise Ship 2018 Meyer, Turku Finland Carnival Horizon Cruise Ship 2018 Fincantieri, Marghera Italy Seaburn Ovation Cruise Ship 2018 Fincantieri, Genova Sestri Ponente Italy MSC Seaview Cruise Ship 2018 Fincantieri, Monfalcone Italy MSC Seaside Cruise Ship 2018 Fincantieri, Monfalcone Italy Viking Orion Cruise Ship 2018 Fincantieri, Ancona Italy Nieuw Statendam Cruise Ship 2018 Fincantieri, Marghera Italy Hammershus Car Ferry 2018 Rauma Marine Constructions Finland Evgeny Primakov Icebreaking Supply/Stand-by vessel 2018 Arctech Helsinki Shipyard Finland MSC Meraviglia Cruise Ship 2017 Chantiers de l’Atlantique France MSC Meraviglia Cruise Ship 2017 STX France France MS Asterix Naval Auxiliary Supply Vessel 2017 Chantier Davie Shipyard Canada Stepan Makarov Icebreaking Supply/Stand-by vessel 2017 Arctech Helsinki Shipyard Finland Fedor Ushakov Icebreaking Supply/Stand-by vessel 2017 Arctech Helsinki Shipyard Finland Tallink Megastar Car Ferry 2017 Turku Shipyard Finland Gennadiy Nevelskoy Icebreaking Supply/Stand-by vessel 2017 Arctech Helsinki Shipyard Finland Mein Schiff 6 Cruise Ship 2017 Turku Shipyard Finland Mein Schiff 5 Cruise Ship 2016 Turku Shipyard Finland Seabourn Encore Cruise Ship 2016 Fincantieri Italy Viking Sky Cruise Ship 2016 Fincantieri Italy Seven Seas Explorer Cruise Ship 2016 Fincantieri Italy Carnival Vista Cruise Ship 2016 Fincantieri Italy Viking Sea Cruise Ship 2016 Fincantieri Italy Koningsdam Cruise Ship 2016 Fincantieri Italy Saffron Superyacht 2016 Mariotti Italy Genting Dream Cruise Ship 2016 Meyer Werft, Papenburg Germany Ovation of the Seas Cruise Ship 2016 Meyer Werft, Papenburg Germany Polaris Multipurpose icebreaker 2016 Helsinki Shipyard Finland Le Lyrial Cruise Ship 2016 Fincantieri Italy Viking Star Cruise Ship 2015 Fincantieri Italy Britannia Cruise Ship 2015 Fincantieri Italy Murmansk Icebreaking Supply/Stand-by vessel 2015 Helsinki Shipyard Finland Norwegian Escape Cruise Ship 2015 Meyer Werft, Papenburg Germany Anthem of the Seas Cruise Ship 2015 Meyer Werft, Papenburg Germany Mein Schiff 4 Cruise Ship 2015 Turku Shipyard Finland Mein Schiff 3 Cruise Ship 2014 Turku Shipyard Finland Regal Princess Cruise Ship 2014 Fincantieri Italy Costa Diadema Cruise Ship 2014 Fincantieri Italy Turva Coast guard vessel 2014 Rauma Shipyard Finland Baltika Multipurpose energy and rescue vessel 2014 Helsinki Shipyard Finland Searoad Mersey II RoRo ferry 2014 Flensburger Schiffbaugesellschaft Germany Loch Seaforth RoPax ferry 2014 Flensburger Schiffbaugesellschaft Germany Sonne Research vessel 2014 Meyer Werft, Papenburg Germany Aleksey Dhirikov Icebreaker 2013 Helsinki Shipyard Finland Stella Ferry 2013 Rauma Shipyard Finland Vitus Bering Icebreaker 2012 Helsinki Shipyard Finland RV Mirabilis Fishery research vessel 2012 Rauma Shipyard Finland Viking Grace Cruise Ship 2012 Turku Shipyard Finland Spirit of France Car Ferry 2012 Rauma Shipyard Finland Spirit or Britain Car Ferry 2011 Rauma Shipyard Finland S.A. Agulhas II Arctic survey and research vessel 2011 Rauma Shipyard Finland Allure of the Seas Cruise Ship 2010 Turku Shipyard Finland Oasis of the Seas Cruise Ship 2009 Turku Shipyard Finland Armorique Cruise Ferry 2009 Rauma Shipyard Finland Baltic Queen Cruise Ferry 2009 Rauma Shipyard Finland

Marine and Offshore Products and Solutions 25 QUALITY AND ENVIRONMENT PAROC stone wool products are made from clean, natural material. They are environmentally friendly throughout their lifecycle, causing no harm to nature during or after use. Stone wool does not contain any ingredients or chemicals that prevent or impede recycling. The use of PAROC products increases both the comfort and safety of the environment in which they are installed, creating a better place to work – as well as a more efficient to work – as well as a more efficient process. Paroc factories have been certified according to the Quality Management System ISO 9001 and Environmental System ISO 14001. Because of these systems, you can be sure that products that emerge from our factories are of a consistently high quality and are produced in a way that emphasises environmental considerations.

Health and Safety PAROC products are safe to use. No CFCs or HCFCs are used in the production of the products. PAROC products also fulfil NoteQ of EU Commission Directive 97/69/EC. This means that stone wool fibres are biodegrad- able and are not classified as a possible human carcinogenic. They do not contain asbestos. Our health and safety data sheets are available on our web pages at www.paroc.com.

STORAGE AND HANDLING PAROC stone wool products are made from a naturally robust material. They are easy to store and install, and safe to handle.

Storage If the products are stored outdoors, they must be protected from rain. Stack the packages on a flat platform that doesn’t touch the ground. Cover the stacks with a waterproof tarpaulin or plastic sheet if necessary. If the products get wet despite these measures, they can be dried and used as normal. Stone wool dries quickly and its becoming wet will not change its properties. Our preformed insulation components are quick Use personal protection equipment that meets to install and do not need much cutting work on your particular needs, and keep your work clothing site. Handle the product packages in a manner that separate from your other clothing. It is also advisable prevents damage. Care must be taken not to break to wear protective goggles if your eyes are sensitive the edges or corners of the packages, especially to dust. This is particularly important when working during unloading. with overhead insulation. If you wear contact lenses, you should always wear close-fitting protective gog- Personal Safety Equipment gles. A dust mask is also necessary if the amount of Scientific studies show that stone wool fibres do dust is significant. not harm your health, but the use of protective You can read more about personal safety in insula- equipment is recommended to avoid skin irritation. tion work on our web pages at www.paroc.com.

26 Marine and Offshore Products and Solutions TRUSTED SERVICE AND ADVICE At Paroc, we do more than produce high quality stone wool insulation products - we also supply the help and advice necessary to make your job as easy and straightforward as possible. We have developed a popular range of practical tools that are as valued by designers as they are by installers. Pocket guides, dimensioning software, simple expla- nations of laws and regulations, and a content-rich website are just some of the free resources that our customers benefit from. If any of your questions remain unanswered, please let us know – we are always grateful for any tips on how to make our service even better.

Insulation Education At Paroc, we want to share our knowl- edge in order to help you get the utmost out of our products. That’s why we can arrange specialised training on industrial insulation. In our seminars, you can learn, for example, about the purpose of insulation, the difference between insulation for pipes and flue ducts, and how to choose the right solution. We also cover the guidelines and regulations that apply o insulation in your area. Please contact us for further information.

Personal Contacts for the Best Solution Early contact with Paroc confers many advantages when it comes to identifying the optimal insulation solution for your particular requirements. At the designing and planning stage, it is important to Technical Advaice consider what kind of properties the Every year we receive a lot of questions about insulation insulation solution should possess. theory and products. No question is too big or too small for Paroc’s specialists are always on hand our insulation experts. We can advise on the need to insulate, to help and advice, and are experts on the right products to choose, installation methods, and laws customising products and solutions to and regulations. If there’s a question that we can’t answer fit your specific requirements. It is often directly, we’ll ask for help from our wide network of contacts beneficial for us to come and visit the in all areas of the insulation field. site personally so that together we can ascertain the best solution and instal- Punctual Logistics lation method. This helps to maximise Paroc is justifiably renowned for its punctual logistics the performance and service life of the operation. Under normal circumstances, you will receive the insulation. insulation you need shortly after placing the order. This is a service that our customers value highly and have come to rely on.

Marine and Offshore Products and Solutions 27 PAROC® stands for energy-efficient and fire safe insulation solutions of stone wool for new and renovated buildings, marine and offshore, acoustics and other industrial applications. Behind those products, there is an 80-year history of stone wool production knowhow backed with technical insulation expertise and innovation. Building Insulation offering covers a wide range of products and solutions for all traditional building insulation. The building insulation products are mainly used for the thermal, fire and sound insulation of exterior walls, roofs, floors and basements, intermediate floors and partitions. Sound absorbing ceilings and wall panels for interior acoustic control, as well as industrial noise control products, are available in the range. Technical Insulation offering includes thermal, fire and sound insulation in HVAC systems, industrial processes and pipework, industrial equipment as well as shipbuilding and offshore industry.

For more information please visit www.paroc.com

Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, Paroc makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein. Paroc reserves the right to modify this document without prior notice.