DOCSLIB.ORG

ACCEL Is a Trademark of ACCEL Performance Group CLEVELAND, OHIO Performance Fuel & Ignition Catalog ©2014 Printed in U.S.A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ACCEL Is a Trademark of ACCEL Performance Group CLEVELAND, OHIO Performance Fuel & Ignition Catalog ©2014 Printed in U.S.A Performance Fuel & Ignition Catalog Tech Service: 216-658-6395 #74831G ACCEL is a trademark of ACCEL Performance Group CLEVELAND, OHIO Performance Fuel & Ignition Catalog ©2014 Printed in U.S.A. www.accel-ignition.com #74831G For over 40 years... INSIDE SPINE ACCEL has been the leader in performance fuel and ignition systems and we have no intention of slowing down. Here at ACCEL, we see ourselves as a part of your pit crew. We’re dedicated to research, engineering and testing results in fuel and ignition products. Our goal has always been simple and direct– lead the market with innovative new products. Push power, speed and performance as quickly as automotive technology advances allow. The ACCEL product line offers a wide range of performance products including digital fuel injection systems, fuel injectors, coils, distributors, caps, rotors, ignition wires and sparkplugs. ACCEL has proven its prowess for creating products that are better than performance capable on racing circuits and drag strips around the world. While most ACCEL components are designed for easy installation, our commitment to service and performance has led to the development of a network of Engine Management Installation Centers (EMIC), in an effort to provide qualified installation and calibration services for the more complex www.accelnation.com ACCEL EFI Engine Management Systems. Every interaction is an opportunity to communicate the advantages of the ACCEL brand. Ignition Products NEW PRODUCTS ....................................................................................... 2-5 Ceramic Wire Kits, Shorty Spark Plugs, CDX Ignition Box, Energy Booster & Import COP’s COILS......................................................................................................... 6-17 Universal Coils, Race Coils, GM Coils, Ford Coils, Chrysler Coils, Sport Compact Coils & Coil Accessories DISTRIBUTORS ..................................................................................... 18-23 Street Billet Distributors, GM Opit-Spark II Distributor, Billetech Distributors, GM/Ford/Chrysler/Dodge/ Plymouth/AMC Performance Replacement Distributors, Restricted Class Racing Distributors & BilleTech Distributor Kits DISTRIBUTOR COMPONENTS & TUNE-UP PARTS ........................24-72 Application Guides, Tune-Up Kits, Point, Condensers, Points Eliminators, Modules & Gears PLUG WIRE SETS & ACCESSORIES ................................................ 73-117 Ceramic Wire Set, 300+ Wire Sets, Super Stock 5000/4000/3000 Series Wire Sets, Armor Shield Wire Sets, Pro 25 Race Wire Sets & Application Guides SPARK PLUGS & ACCESSORIES ...................................................118-135 Spark Plugs, Application Guide, Cross Reference, Index Washers & Indexing Tool FUEL INJECTION ............................................................................... 136-155 Gen 7 Systems, Gen 7+, Thruster EFI, Conversion Kits, Spark/Fuel Kits, Dual Sync Distributors, Intake Manifolds, Fule Injectors, Fuel Pumps, Regulators, Sensors, Components & Software INDEX ..................................................................................................156-159 Numerical Lookup 1 New Products Custom Fit Ceramic Wire Kits ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit. Extreme 9000 Custom-Fit Ceramic Wire Kits Part # Buick 1986-87 Regal, GN, GNX 3.8L Turbo ................................................9028C Chevy/GMC Truck V8 1975-86 w/HEI .........................................................9011C Chevy/GMC Truck Big Block 396-502 w/HEI ............................................9013C Chevy Small Block 1975-86 wires under valve cover w/HEI ................9018C Chevy/GMC 1985 7.4L C,K 25HD-35 H4D cast iron exhast manifold ........9019C Chevy/GMC Truck 1985-97 5.0/5.7L .............................................................9020C Chevy/GMC Truck Big Block 1990-95 (Except SS) ..................................9024C Camaro/Firebird 1987-92 V8 5.0/5.7L w/TBI .............................................9033C Camaro/Firebird 1993-97 5.7L LT1/LT4 Engines ........................................9038C Chevy/GMC 1996-2000 Vortec V8 5.0/5.7L ..................................................9042C Chevy/GMC Truck 1996-2000 7.4L Vortec Engines ..................................9043C Chevy 1995-2001 Vortec V6 4.3L ..................................................................9044C 1997-2001 Camaro/Firebird/Corvette LS1/LS6 Engines ...........................9052C Chevy/GMC 1999-2002 4.8/5.3/6.0L LS1 Engines .......................................9059C Chevy/GMC 2001-04 C,K 2500HD-3500 Silverado 8.1L .............................9065C GM Gen 3 LS1/LS6 stock coil boots universal kit ...................................9060C GM Gen 4 LS3/LS4/LS7 Engines ..................................................................9070C Ford 1983-93 5.0L w/EEC-IV ..........................................................................9022C Ford Mustang/Capri 1993-86 and Ford Truck 1988-98 7.5L ................................................................................9056C Dodge Truck 1991-98 5.2/5.9L ......................................................................9023C Dodge Truck 1992-2001 3.9L V6 ...................................................................9039C Chrysler/Dodge/Plymouth B, RB Block 361-440 CID (Except HEMI) ................................................................................................9045C Ceramic Single Wire Replacements These wire kits make great replacements for that one damaged or cut wire. The single lead allows you to build your own single replacement wire. The ceramic boot is already installed. Simply cut the wire to desired length, install the boot and terminal, and install on your vehicle. These kits include a 60” 8mm Extreme 9000 Ceramic wire with the ceramic boot pre- installed, 90° boots and terminals for points and HEI caps, along with a straight points-style terminal and boot. Description Part # Single Wire Replacement Lead with 180° Ceramic Boot ..........................#170900C Single Wire Replacement Lead with 90° Ceramic Boot ...........................#170901C Single Wire Replacement Lead with 135° Ceramic Boot ..........................#170902C 2 New Products C-Cut Spark Plugs C-Cut – Centerline Ground Strap or Ground Electrode ACCEL has improved the ignitability of the spark plug in a new design! ACCEL of Electrodes has always utilized unique electrode grounding designs to improve combustion and create a larger spark. Core or Center Benefits Include: Electrode • Allows spark to expand directly above the midpoint of the electrode core – preventing the spark from being shrouded by the ground strap. • Gives the flame an unblocked area to grow – creates a larger flame front for a more complete burn. • Reduces excess heat absorption of the electrode and ground strap, also known as the “quenching effect”, which leads to misfiring, rough idle and overall poor performance. • Produces a larger spark nucleus without having to increase the spark gap. • Creates a more complete burn of the air-fuel mixture resulting in -Increased performance, improved throttle response, greater fuel efficiency and re- duced emissions. 14mm Thread, .460” Reach, Tapered Seat, 5/8ths Hex, Projected Tip, C-Cut ground electrode, Non-Resistor, Set of 4 .......................................................................0276S-4 14mm Thread, .750” Reach, Flat/Gasket Seat, 5/8ths Hex, Projected Tip, C-Cut ground electrode, Resistor, C-CUT DESIGN Set of 4 .......................................................................0414S-4 14mm Thread, .750” Reach, Flat/Gasket Seat, 5/8ths Hex, Projected Tip, C-Cut ground electrode, Resistor, Set of 4 .......................................................................0416S-4 14mm Thread, .375” Reach, Flat/Gasket Seat, 13/16ths Hex, Projected Tip, C-Cut ground electrode, Resistor, Set of 4 .......................................................................0437S-4 14mm Thread, .460” Reach, Tapered Seat, 5/8ths Hex, Projected Tip, C-Cut ground electrode, Resistor, Set of 4 .......................................................................0574S-4 14mm Thread, .460” Reach, Tapered Seat, 5/8ths Hex, Projected Tip, C-Cut ground electrode,Resistor, Set of 4 .......................................................................0576S-4 Platinum, 14mm Thread, .708” Reach, Tapered Seat, 5/8ths Hex, Projected Tip, Resistor, Sold Individually .........................................................P526S 14mm Thread, .375” Reach, Flat/Gasket Seat, 13/16ths Hex, Projected Tip, C-Cut ground electrode, Resistor, Set of 8 .............................................................................8197 14mm Thread, .460” Reach, Tapered Seat, 5/8ths Hex, Projected Tip, C-Cut ground electrode, Resistor, Set of 8 .............................................................................8198
Load more

Recommended publications
  • Bibliography on Ignition and Spark-Ignition Systems
    Bibliography on Ignition and Spark-Ignition Systems U.S. Department of Commerce National Bureau of Standards Miscellaneous Publication 251 ; THE NATIONAL BUREAU OF STANDARDS Functions and Activities The functions of the National Bureau of Standards include the developm and maintenance of the national standards of measurement and the provision of means and methods for making measurements consistent with these standards; the determination of physical constants and properties of materials ; the develop- ment of methods and instruments for testing materials, devices, and structures advisory services to government agencies on scientific and technical problems; invention and development of devices to serve special needs of the Government;I and the development of standard practices, codes, and specifications, including assistance to industry, business and consumers in the development and accepi ance of commercial standards and simplified trade practice recommendation!I The work includes basic and applied research, development, engineering, instru- mentation, testing, evaluation, calibration services, and various consultation andd information services. Research projects are also performed for other govern- ment agencies when the work relates to and supplements the basic program of the Bureau or when the Bureau's unique competence is required. The scope of activities is suggested by the listing of divisions and sections on page 26. Publications The results of the Bureau's research are published either in the Burea>au'g own series of publications or in the journals of professional and scientific societies. The Bureau itself publishes three periodicals available from the Gov- ernment Printing Office: The Journal of Research, published in four separai sections, presents complete scientific and technical papers ; the Technical Ne Bulletin presents summary and preliminary reports on work in progress ; a Central Radio Propagation Laboratory Ionospheric Predictions provides da for determining the best frequencies to use for radio communications througho the world.
    [Show full text]
  • HEI System - Description and Diagnosis Chart
    HEI System - Description and Diagnosis Chart No. T -36 February, 1978 The High Energy Ignition System (HEI) In 1974 General Motors began equipping passenger cars and light trucks with an electronic ignition system called High Energy Ignition (HEI). The HEI is different in many ways from the previously standard breaker-point ignition system . ^ Higher available secondary voltage of 35,000 volts. ^ The secondary spark plug wires are larger diameter with silicone rubber insulation. This type of wire minimizes cross firing or arching between wires. The silicone insulation is softer than rubber insulation, so wires should be routed to avoid chafing on the engine or accessories. The insulation should never be punctured with sharp tools. The boots fit tightly on the spark plug insulators and are thus sometimes difficult to remove from the spark plugs. Tools are available from several tool companies to make removal easier. ^ Distributor cap and rotor are made of special material to handle the higher secondary voltage. ^ An internal condenser is for reducing radio interference and is not a normal replacement item. ^ There is no resistance wire or ballast resistor between the ignition switch and the coil. The system operates on full battery voltage. Zoom Sized for Print ^ The ignition coil is mounted in the distributor cap on most engines. Figure 1. ^ Some 4-cylinder and L-6-cylinder ignition coils are mounted outside of the distributor but are different in appearance from previously standard ignition coils. Zoom Sized for Print ^ Breaker points are no longer used, so point maintenance and replacement is eliminated. Instead of breaker points, a magnetic pickup and an electronic module are used.
    [Show full text]
  • Automotive Ignition Coil: Progress Through Efficiency
    Automotive Ignition Coil: Progress Through Efficiency he automotive ignition sys- tem is crucial to the internal Tcombustion engine’s operation and efficiency. At the heart of the entire ignition system is the ignition coil. To understand how ignition coils operate, it is important to have a general understanding of the basic principles of vehicle electronics. Direct Current (DC) vs. Alternating Current (AC) The primary winding of the For many years, this interruption ignition coil is wound with a small of the primary current was accom- number of turns creating a small plished by mechanically opening resistance. Applying battery volt- a contact called the “points” in a age to this coil causes a sizable DC synchronized sequence to send current to flow. The secondary coil high voltage pulses through a rotary has a much larger number of turns switch called the “distributor” to the and therefore acts as a step-up sparkplugs. One of the drawbacks of transformer. Rather than operating this process was that the interruption on AC voltages, this secondary of current in the primary coil generat- coil is designed to produce a large ed an inductive back-voltage in that voltage spike when the current in coil which tended to cause sparking the primary coil is interrupted. Since across the points. The system was the induced secondary voltage is improved by placing a sizable capac- proportional to the rate of change of itor across the contacts so that the the magnetic field through it, opening voltage surge tended to charge the a switch quickly in the primary circuit capacitor rather than cause destruc- FARADAY’S LAW AND to drop the current to zero will gener- tive sparking across the contacts.
    [Show full text]
  • Spark Your Interest
    Simply put, an ignition system activates a fuel-air mixture to create energy. The first ignition system to use an electric spark is thought to be Alessandro Volta’s toy electric pistol, ca. 1780. We’ve come a long way since that toy pistol! Today, the most commonly used ignition is the 4-stroke internal combustion system found in almost all vehicles, including your Corvette. Mid America Motorworks takes a look at the evolution of the ignition system, from early vehicles to the powerhouse Corvettes of today. Ignition – Why You Need A Spark Stroke 1: The piston’s Intake Valve opens to suck fuel and In a 4-stroke internal combustion system, the spark is air into the cylinder. where the magic happens. The spark ignites the air-fuel Stroke 2: The Intake Valve closes capturing the fuel and air. mixture to create a burst of energy that moves your Corvette The engine compresses the mixture, creating a large amount down the road. Just as the name implies, this happens in a of potential energy. sequence of 4 steps that continually repeat. • SPARK: When the piston reaches the top of the cylinder, the spark from the spark plug causes the mixture to explode. Camshaft Spark Plug Valve Spring Stroke 3: The explosion forces the piston back downward, Cam Mixture In releasing the potential energy as power. Stroke 4: The Exhaust Valve opens and the piston forces Cylinder Head exhaust out of the cylinder. Exhaust Valve Intake Valve Combustion Cooling Water Chamber Piston Cylinder Block Crankcase Connecting Rod Crankshaft Air Intake Compression Combustion Exhaust Emission The Main Components Distributor Spark Plug Wires The Distributor routes high voltage from the ignition coil Spark Plug Wires deliver the voltage to the Spark Plug, to the spark plugs in the correct firing order.
    [Show full text]
  • Spark Your Interest
    Simply put, an ignition system activates a fuel-air mixture to create energy. The first ignition system to use an electric spark is thought to be Alessandro Volta’s toy electric pistol, ca. 1780. We’ve come a long way since that toy pistol! Today, the most commonly used ignition is the 4-stroke internal combustion system found in almost all vehicles, including your Corvette. Mid America Motorworks takes a look at the evolution of the ignition system, from early vehicles to the powerhouse Corvettes of today. Ignition – Why You Need A Spark Stroke 1: The piston’s Intake Valve opens to suck fuel and In a 4-stroke internal combustion system, the spark is air into the cylinder. where the magic happens. The spark ignites the air-fuel Stroke 2: The Intake Valve closes capturing the fuel and air. mixture to create a burst of energy that moves your Corvette The engine compresses the mixture, creating a large amount down the road. Just as the name implies, this happens in a of potential energy. sequence of 4 steps that continually repeat. • SPARK: When the piston reaches the top of the cylinder, the spark from the spark plug causes the mixture to explode. Camshaft Spark Plug Valve Spring Stroke 3: The explosion forces the piston back downward, Cam Mixture In releasing the potential energy as power. Stroke 4: The Exhaust Valve opens and the piston forces Exhaust Valve Cylinder Head exhaust out of the cylinder. Intake Valve Intake Valve Combustion Cooling Water Chamber Piston Cylinder Block Crankcase Connecting Rod Crankshaft Air Intake Compression Combustion Exhaust Emission The Main Components Distributor Spark Plug Wires The Distributor routes high voltage from the ignition coil Spark Plug Wires deliver the voltage to the Spark Plug, to the spark plugs in the correct fi ring order.
    [Show full text]
  • Ignition Timing,” in This Section
    IGNITION SYSTEM SERVICE MANUAL NUMBER 26 Specifications Timing Timing (At Idle rpm) 1 1 BTDC 2 / 1 ATDC 3 / 2 ATDC 4 1Timing must be set using a special procedure as outlined in this section. Timing cannot be properly set using the conventional method. 2Serial number break: 0L096999 and below 3Serial number break: 0L097000 - 0L0340999 4Serial number break: 0L341000 and above. Spark Plugs Spark Plug Gap .035 In. (0.9 mm) AC-MR43LTS 3.0L NGK-BPR6EFS Champion RS12YC GM 4-Cylinder In-line Firing 50683 Firing Order 1-3-4-2 Page 4B-4 90-861329--1 MARCH 1999 SERVICE MANUAL NUMBER 26 IGNITION SYSTEM Description EST or Electronic Spark Timing is a High Energy Ignition System (HEI). The distributor itself has no centrifugal advance mechanism or devices. The spark plug wires are a carbon-impregnated cord conductor with a silicone rubber jacket. It is important they be handled with care, and routed so as not to cross each other or to be in contact with other parts of the engine to prevent rubbing. The EST System uses a square coil with epoxy covered windings to protect against mois- ture and arc-over. The timing cannot be set the same way that other ignition systems were. b c e d a f 70106 a - Distributor with Spark Plug Wires b - Wires (WHITE) Used in Timing Procedure c - Wire from Shift Interrupt Switch d - Distributor Harness e - Engine Harness Wire (PURPLE AND GRAY) f - Coil EST uses a magnetic pulse generator and an electronic module to primary circuit current. Internally the Pulse Generator, or magnetic pick-up assembly, takes the place of conven- tional points.
    [Show full text]
  • Optronic Description
    Section A1 49 - 51 Tiverton Street London SE1 6NZ United Kingdom Tel: (44) 20 7403 4334 Fax: (44) 20 7368 1270 [email protected] www.autocar-electrical.com ã OPTRONIC & PERFORMANCE IGNITION SYSTEMS Product Guide and System Component Description Contents; Page no Introduction A1.2 The Optronic System A1.2 The Performance Ignition System A1.2 Optical Switches A1.3 Marine Ignition Options A1.4 Fitting Kits A1.4 Please check for product bulletins and updated information relating to Lumenition Optronic Ignition systems at the end of this document. Website www.autocar-electrical.com Copyright ©2006 Autocar Electrical Equipment Co. Ltd. London UK No unauthorised editing or copying permitted Lumenition Ignition System Description Lumenition optically-switched contact breaker replacement ignition systems consist of two basic models, the Optronic ignition system and the Performance Ignition system. The installation of both systems is straight forward and easily reversible, involves no specialist tools and is normally completed in less than an hour. Both systems replace the distributor contact breakers with an optical switch (using a separate, distributor-specific fitting kit) and an external power module. The same distributor-specific fitting kit is used for both models and the optical switches differ only in the connectors used with the different power modules (see below) The system works by creating a beam of light inside the distributor which is broken by a fan-like part (called a chopper) fitted over the distributor cam. As the distributor cam rotates, the chopper breaks the beam of light and the optical switch and external power module fires the coil.
    [Show full text]
  • Fiero Ignition Systems
    Fiero Ignition Systems January 20, 2018 Rock Chevrolet Northern Illinois Fiero Enthusiasts Presented by Art Hall and Ray Dyreson 1 The Stock Fiero has Two Types of Ignition Systems Distributor 4 cyl: 84, 85-86 6 cyl: 85-88 Direct Ignition System (DIS) 4 cyl: 87-88 2 Types of Automotive Ignition Systems • Distributor • Mechanical Points • Electronic Ignition (EI) • Direct Ignition System (DIS) or Distributorless or Waste-Spark Ignition • Coil on Plug (COP) • Coil Near Plug (CNP) 3 To Understand Ignition Systems it Would Be Good to Understand Automotive Wiring Diagrams 4 Components have unique symbols, but many times they are also called out directly. Switches, electronic modules, lights, coils 5 Dashed lines indicate that only part of the component is represented in this diagram. This same component will be seen on other diagrams. A solid line indicates the entire component is shown 6 Wire size is given in cross-section area in sq. mm. Wire insulation color is given along with any trace or stripe color. mm2 AWG 0.5 20 0.8 18 1.0 16 2.0 14 3.0 12 5.0 10 8.0 8 13.0 6 19.0 4 32.0 2 52.0 0 7 G, C, S, followed by 3 digits are a specific ground, connector, or splice. The 3 digits give an indication of its location. 100-199 Under Hood 200-299 Under Dash Right of the 300-399 Pass. Compart. wire color is 400-499 Trunk the circuit no. Male / Female Connectors Does not apply to Fieros! Per Fiero Service Manual (?) 200-299 Pass.
    [Show full text]
  • Engine Performance
    4 Engine Performance Chapter 21 ■ Ignition To have an efficient running engine, there must be the Systems correct amount of fuel mixed with the correct amount ■ Chapter 22 Ignition System of air. These must be present in a sealed container and Service shocked by the right amount of heat, at the correct Chapter 23 ■ Fuel Systems time. With total efficiency, the engine would burn all Chapter 24 ■ Fuel System Diagnosis and Service the fuel it receives and would release extremely low Chapter 25 ■ Carburetors amounts of pollutants in its exhaust. Although total Chapter 26 ■ Carburetor efficiency is not possible at this time, late-model Diagnosis and Service engines emit very low amounts of pollutants, thanks to ■ Chapter 27 Fuel Injection emission control devices. Chapter 28 ■ Fuel Injection Diagnosis and Service To have highly efficient engines, the basic engine needs Chapter 29 ■ Emission highly efficient ignition, fuel, and emission control sys- Control Systems tems. Although there are many different designs of ■ Chapter 30 Emission these systems, the designs are similar in operation. Control Diagnosis and Service Engine performance systems are some of the most tech- Chapter 31 ■ On-Board Diagnostic Systems nologically advanced systems found on modern vehi- Chapter 32 ■ On-Board cles. They all rely on a network of input sensors and Diagnostic System Diagnosis output devices and tie directly into the electronic and Service engine control system. Mastery of these systems is nec- WE ENCOURAGE essary for an automotive technician. PROFESSIONALISM The material in Section 4 matches the content areas of the ASE certification test on engine performance and THROUGH TECHNICIAN sections of the certification test on engine repair.
    [Show full text]
  • DIGITAL FUEL INJECTION • Generation 7+ Fuel Injection Systems
    DIGITAL FUEL INJECTION • Generation 7+ Fuel Injection Systems • Generation 7+ Plug 'N Play Systems • Dual Sync Distributors • Ignition Systems • Wiring Harnesses • Intake Manifolds and Accessories • Fuel Injectors • Fuel Pumps and Regulators The first name in ACCELeration! ACCEL/DFI GENERATION 7+ PROGRAMMABLE ENGINE MANAGEMENT SYSTEMS DFI Generation 7+ Programmable Engine Management Systems The new ACCEL/DFI Generation 7+ Engine Management System is the... • BEST EQUIPPED, • MOST CAPABLE, and • EASIEST TO USE system in its class! BEST EQUIPPED Every DFI Generation 7+ Engine Management System comes equipped with multiple software-selectable fuel and ignition con- trol strategies. The following control strategies are available in the module as it comes from the factory: Fueling Strategies • Sequential (Cam signal required) • Staged Sequential (4 Cylinder only, Cam signal required) • Staggered Batch (Bank to Bank) • Throttle Body Injection (Standard,TBI Staged) • Throttle Body Injection (Dual-Quad, Multiple TBI Staged) Ignition Compatibility: • DFI Dual Sync Distributor (supplies both cam and crank signal) • GM High Energy Ignition • LS1 coil on plug ignition • Ford Thick Film Module • Inductive Pick-up Crank Trigger or Distributor type • Hall Effect -- Crank Trigger or Distributor • Buick GN Multiple Coil packs • Ford EDIS • Other Custom, User Defined Settings 202 ACCEL/DFI GENERATION 7+ PROGRAMMABLE ENGINE MANAGEMENT SYSTEMS MOST CAPABLE In addition, each and every DFI Generation 7+ Engine Control Module is capable of controlling a wide
    [Show full text]
  • Basic Ignition Systems Produced By
    Phase 2 Trade of Motor Mechanic Module 4 Unit 1 BASIC IGNITION SYSTEMS Produced by In cooperation with: Subject Matter Experts Martin McMahon & CDX Global Curriculum Revision 2.2 16-01-07 © SOLAS 2013 Module 4 - Unit 1 Basic Ignition Systems Table of Contents Introduction ........................................................................................................ 1 Unit Objective ..................................................................................................... 1 1.0 Health and Safety Procedures ................................................................. 3 1.1 Health and Safety Procedures ...................................................... 3 2.0 Basic Function of the Spark Ignition System ......................................... 5 2.1 Basic Ignition System ................................................................... 5 2.2 Ignition Principles ........................................................................ 5 3.0 Operation of a Contact Breaker Ignition System ................................... 7 3.1 Mechanical Ignition ...................................................................... 7 3.2 The Battery ................................................................................... 9 3.3 Ignition Coil .................................................................................. 9 3.4 Distributors ..................................................................................12 3.5 Ballast Resistor ............................................................................13
    [Show full text]
  • Ignition Systems Application Manual
    Ignition Systems Application Manual Energy and Chassis IGNITION SYSTEMS APPLICATION MANUAL Revised Jan 2005 Ignition Systems Delphi Energy and Chassis Systems Tech Center Brighton 12501 E. Grand River Brighton, Mi., 48114, USA 1999 Delphi Automotive Systems Updated January 2005 Ignition Systems Application Manual Release/Revision Summary Sheet CHANGE DATE REASON FOR CHANGE Originator PAGE(S) NO. Original 30/AUG/99 Released C.R. Strange N/A 1 Jan 2005 Update, pencil coil information added B. Griffith 3-15 – 3-19 Information and graphics added, Ion Sense. Various Ignition Systems Application Manual Table of Contents 1.0 INTRODUCTION..................................................................................................................................1-1 1.1 SCOPE OF DOCUMENT ............................................................................................................................1-1 1.2 CLASSIFICATION .....................................................................................................................................1-1 1.3 DOCUMENT MANAGEMENT ......................................................................................................................1-1 1.3.1 Document Release and Updates .................................................................................................1-1 1.3.2 Mailing List....................................................................................................................................1-2 1.3.3 Document Revision Procedure.....................................................................................................1-2
    [Show full text]