The Sii 504 Digital Video Processor 查询"SII504"供应商

Total Page:16

File Type:pdf, Size:1020Kb

The Sii 504 Digital Video Processor 查询 The SiI 504 Digital Video Processor 查询"SII504"供应商 The SiI 504 is a high-quality digital video format converter used to convert any standard- definition interlaced video signal to a non-interlaced signal. This progressive output is suitable for display on LCD or DLP panels, or on progressively scanned CRT displays. The SiI 504 is targeted at products that require the highest quality deinterlacing available and is particularly well suited for progressive-scan DVD players, set-top boxes, high-definition TVs, A/V monitors and video projectors. The deinterlacer in the SiI 504 performs the involved process of generating progressive frames from the NTSC, PAL or SECAM interlaced video input. Advanced motion-adaptive and source-adaptive techniques create an output image of incredible detail without introducing the motion and interlacing artifacts commonly associated with other interlace to progressive scan converters. Proprietary diagonal processing, transition management and post-processing technologies are designed to deal well with everything from clean, flawless video sources to worst-case, noisy, unstable sources. The output from the deinterlacer can be in either RGB or YCbCr format. A three-channel, 10-bit color lookup table can be used for changing output brightness, contrast, gamma, hue or color temperature. A very flexible programmable video timing generator produces all video-timing (sync, blanking, etc.), providing support for unusual display requirements. Interlaced Video Source SiI 504 (Any Standard Image Video Decoder Non-compressed Enhancement Progressive-Scan or MPEG-2 Interlaced Digital Video Engine RGB or YCbCr Decoder Output) Serial or Parallel Bus 32-bit Memory Control/Status Interface Interface Microcontroller SDRAM (optional) 查询"SII504"供应商 The SiI 504 Digital Video Processor s Serial or Host k c Clock 27 M Hz o parallel bus Interface 4 l Generation M aster Clock C SiI 504 Features Configuration Register Outputs General • Highly Integrated Design: Deinterlacer, Interlaced Video Deinterlace Video Progressive Video Input Horizontal Scaler, Color Lookup Table, Input Processor Output Video Output Memory Controller, Color Space Serial Audio Audio/ Converter, LCD/CRT Controller Input Video Field Field Frame Frame • Advanced Video Processor Architecture Serial Audio Sync Data Data Data Data with real-time computation at more than Output Audio 6 Billion arithmetic operations per second Data • Standard host interfaces: serial bus (I2C-compatible) or 16-bit parallel bus M emory Controller (186 compatible) • No programming needed for standard applications SDRAM Control, • Simple Memory Configuration: on-chip Address, and Data memory controller supports dual 1Mx16 or single 2Mx32 SDRAM(s) Deinterlacer • Advanced Cubic Interpolating Deinterlacer • Integrated Color Lookup Table with Silicon Image’ s 10-bit color output dynamic range. • Four-Field Processing provides high- Supports adjustment of output SiI 504 Starter Kit performance, motion-adaptive image brightness, contrast, gamma, hue, enhancement The CP504DVI Starter Kit includes all of the color temperature hardware and documentation needed to • Diagonal processor reduces jaggies • Built-in colorspace converter provides quickly bring to market new SiI 504-based Source Adaptive Processing selectable output colorspace: applications. The CP504DVI kit is designed to • Automatic, seamless detection of video RGB, YCbCr 4:4:4 or YCbCr 4:2:2 assist developers of video source devices such sources: distinguishes film (for both • Direct Interface to TFT-LCD Panels as progressive scan DVD players and set-top 60Hz and 50Hz standards), video and –Supports 18-bit and 24-bit data boxes as well as display applications such as graphics (30Fps) source masters for interfaces with special features including televisions, projectors and LCD video optimized processing dithering and dynamic range expansion monitors. • Advanced source transition management • Direct interface to 24 and 30-bit video Contents include: D-to-A converters to drive progressive- provides smooth transitions between Hardw are source types scan CRTs or YPbPr outputs • SiI 504 starter kit board • Multiple Output Formats Input • Power supply and cables - 720 pixels/line delivers highest resolution • Supports either 60 Hz, 525-line (NTSC) Documentation and 50 Hz, 625-line (PAL/SECAM) - High-quality scaling to 640 pixels/line • SiI 504 starter kit user’s guide signals (VGA resolution) • SiI 504 datasheet • Parallel digital ITU-R BT.656 or 8/16-bit - ‘Squeeze’ mode centers 4:3 source • Reference schematics (BT.601) data with H/V syncs is within a 16:9 output frame • Application notes compatible with almost all video and • Power Sequencing Control for LCD panels MPEG decoders Environmental Output • 1.8V for core • 8 or 10 bits/component/pixel, 27MHz • 3.3V for I/O with 5V tolerance pixel clock, 31.5KHz HSync rate • Maximum power consumption 350mW Part Number - SiI504CM 208 • EIAJ-Standard 208-pin PQFP package Silicon Image, Inc. 1060 E. Arques, Sunnyvale, CA ©2001 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, DVDO, the DVDO logo, Image Enhancement Engine and 94085 PureProgressive are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. Other trademarks are the property of their respective holders. Product specifications are subject to change without notice. Printed in the U.S.A. 8/00 SiI PB-0004 T 408.616.4000 F 408.830.9530 w w w .siimage.com.
Recommended publications
  • Comparison of HDTV Formats Using Objective Video Quality Measures
    Multimed Tools Appl DOI 10.1007/s11042-009-0441-2 Comparison of HDTV formats using objective video quality measures Emil Dumic & Sonja Grgic & Mislav Grgic # Springer Science+Business Media, LLC 2010 Abstract In this paper we compare some of the objective quality measures with subjective, in several HDTV formats, to be able to grade the quality of the objective measures. Also, comparison of objective and subjective measures between progressive and interlaced video signal will be presented to determine which scanning emission format is better, even if it has different resolution format. Several objective quality measures will be tested, to examine the correlation with the subjective test, using various performance measures. Keywords Video quality . PSNR . VQM . SSIM . TSCES . HDTV. H.264/AVC . RMSE . Correlation 1 Introduction High-Definition Television (HDTV) acceptance in home environments directly depends on two key factors: the availability of adequate HDTV broadcasts to the consumer’s home and the availability of HDTV display devices at mass market costs [6]. Although the United States, Japan and Australia have been broadcasting HDTV for some years, real interest of the general public appeared recently with the severe reduction of HDTV home equipment price. Nowadays many broadcasters in Europe have started to offer HDTV broadcasts as part of Pay-TV bouquets (like BSkyB, Sky Italia, Premiere, Canal Digital ...). Other major public broadcasters in Europe have plans for offering HDTV channels in the near future. The announcement of Blu-Ray Disc and Game consoles with HDTV resolutions has also increased consumer demand for HDTV broadcasting. The availability of different HDTV image formats such as 720p/50, 1080i/25 and 1080p/50 places the question for many users which HDTV format should be used with which compression algorithm, together with the corresponding bit rate.
    [Show full text]
  • BA(Prog)III Yr 14/04/2020 Displays Interlacing and Progressive Scan
    BA(prog)III yr 14/04/2020 Displays • Colored phosphors on a cathode ray tube (CRT) screen glow red, green, or blue when they are energized by an electron beam. • The intensity of the beam varies as it moves across the screen, some colors glow brighter than others. • Finely tuned magnets around the picture tube aim the electrons onto the phosphor screen, while the intensity of the beamis varied according to the video signal. This is why you needed to keep speakers (which have strong magnets in them) away from a CRT screen. • A strong external magnetic field can skew the electron beam to one area of the screen and sometimes caused a permanent blotch that cannot be fixed by degaussing—an electronic process that readjusts the magnets that guide the electrons. • If a computer displays a still image or words onto a CRT for a long time without changing, the phosphors will permanently change, and the image or words can become visible, even when the CRT is powered down. Screen savers were invented to prevent this from happening. • Flat screen displays are all-digital, using either liquid crystal display (LCD) or plasma technologies, and have replaced CRTs for computer use. • Some professional video producers and studios prefer CRTs to flat screen displays, claiming colors are brighter and more accurately reproduced. • Full integration of digital video in cameras and on computers eliminates the analog television form of video, from both the multimedia production and the delivery platform. • If your video camera generates a digital output signal, you can record your video direct-to-disk, where it is ready for editing.
    [Show full text]
  • A Review and Comparison on Different Video Deinterlacing
    International Journal of Research ISSN NO:2236-6124 A Review and Comparison on Different Video Deinterlacing Methodologies 1Boyapati Bharathidevi,2Kurangi Mary Sujana,3Ashok kumar Balijepalli 1,2,3 Asst.Professor,Universal College of Engg & Technology,Perecherla,Guntur,AP,India-522438 [email protected],[email protected],[email protected] Abstract— Video deinterlacing is a key technique in Interlaced videos are generally preferred in video broadcast digital video processing, particularly with the widespread and transmission systems as they reduce the amount of data to usage of LCD and plasma TVs. Interlacing is a widely used be broadcast. Transmission of interlaced videos was widely technique, for television broadcast and video recording, to popular in various television broadcasting systems such as double the perceived frame rate without increasing the NTSC [2], PAL [3], SECAM. Many broadcasting agencies bandwidth. But it presents annoying visual artifacts, such as made huge profits with interlaced videos. Video acquiring flickering and silhouette "serration," during the playback. systems on many occasions naturally acquire interlaced video Existing state-of-the-art deinterlacing methods either ignore and since this also proved be an efficient way, the popularity the temporal information to provide real-time performance of interlaced videos escalated. but lower visual quality, or estimate the motion for better deinterlacing but with a trade-off of higher computational cost. The question `to interlace or not to interlace' divides the TV and the PC communities. A proper answer requires a common understanding of what is possible nowadays in deinterlacing video signals. This paper outlines the most relevant methods, and provides a relative comparison.
    [Show full text]
  • Video Terminology Video Standards Progressive Vs
    VIDEO TERMINOLOGY VIDEO STANDARDS 1. NTSC - 525 Scanlines/frame rate - 30fps North & Central America, Phillipines & Taiwan . NTSC J - Japan has a darker black 2. PAL - 625 scanlines 25 fps Europe, Scandinavia parts of Asia, Pacific & South Africa. PAL in Brazil is 30fps and PAL colours 3. SECAM France Russia Middle East and North Africa PROGRESSIVE VS INTERLACED VIDEO All computer monitors use a progressive scan - each scan line in sequence. Interlacing is only for CRT monitors. LCD monitors work totally differently - no need to worry about. Interlacing is for broadcast TV. Every other line displayed alternatively. FRAME RATES As we transition from analogue video to digitla video. Film is 24 fps, PAL video 25 fps. NTSC 30fps. Actually film and NTSC are slightly different but we don't need to worry about that for now. IMAGE SIZE All video is shot at 72 px/inch - DV NTSC - 720 x 480 (SD is 720 x 486) DV PAL - 720 x 576 (SD PAL is 720 x 576) HD comes in both progressive and interlaced. HD480i is usual broadcast TV 480p is 480 progressive. 720i is 720 interlaced 720p is progressive. 720 means 720 vertical lines 1080 is 1080 vertical lines. 1080i is most popular. 720p is 1280 x 720, HD 1080 is 1920x1080px. All HD formats are 16:9 aspect ratio. Traditional TV is 4:3 aspect ratio. HDV is 1440 x 1080. New format - is it the new HD version of DV? Cameras like the Sony and JVC make minor alterations to this format when shooting In summary HD 1080i = 1920 x 1080 HD 720p = 1280 x 720 Traditional = 720 x 480 (NTSC) 720 x 576 (PAL) VIDEO OUTPUTS Analog Composite, S-Video, Component in increasing quality.
    [Show full text]
  • Video Source File Specifications
    Video Source File Specifications Limelight recommends the following specifications for all video source files. Adherence to these specifications will result in optimal playback quality and efficient uploading to your account. Edvance360 Best Practices Videos should be under 1 Gig for best results (download speed and mobile devices), but our limit per file is 2 Gig for Lessons MP4 is the optimum format for uploading videos Compress the video to resolution of 1024 x 768 Limelight does compress the video, but it's best if it's done on the original file A resolution is 1080p or less is recommended Recommended frame rate is 30fps Note: The maximum file size for Introduction Videos in Courses is 50MB. This is located in Courses > Settings > Details > Introduction Video. Ideal Source File In general, a source file that represents the following will produce the best results: MP4 file (H.264/ACC-LC) Fast Start (MOOV atom at the front of file) Progressive scan (no interlacing) Frame rate of 24 (23.98), 25, or 30 (29.97) fps A Bitrate between 5,000 - 8,000 Kbps 720p resolution Detailed Recommendations The table below provides detailed recommendations (CODECs, containers, Bitrates, resolutions, etc.) for all video source material uploaded to a Limelight Account: Source File Element Recommendations Video CODEC Recommended CODEC: H.264 Accepted but not Recommended: MPEG-1, MPEG-2, MPEG-4, VP6, VP5, H.263, Windows Media Video 7 (WMV1), Windows Media Video 8 (WMV2), Windows Media Video 9 (WMV3) Audio CODEC Recommended CODEC: AAC-LC Accepted but not Recommended: MP3, MP2, WMA, WMA Pro, PCM, WAV Container MP4 Source File Element Recommendations Fast-Start Make sure your source file is created with the 'MOOV atom' at the front of the file.
    [Show full text]
  • Hdtv (High Definition Television)
    WHITE PAPER HDTV (High DefinitionT elevision) and video surveillance Table of contents Introduction 3 1. HDTV impact on video surveillance market 3 2. Development of HDTV 3 3. How HDTV works 4 4. HDTV standardization 6 5. HDTV formats 6 6. Benefits ofH DTV in video surveillance 6 7. Conclusion 7 Introduction The TV market is moving rapidly towards high-definition television, HDTV. This change brings truly re- markable improvements in image quality and color fidelity. HDTV provides up to five times higher resolu- tion and twice the linear resolution compared with traditional, analog TV. Furthermore, HDTV comes with wide screen format and DVD-quality audio. Growth in the consumer market for HDTV is impressive. In 2007 the HDTV household penetration in the U.S. was approximately 35%. According to estimates, 85% of all viewers will have an HDTV set at home by 2012. Already today, virtually all major television productions are HD. The two most important HDTV standards today are SMPTE 296M and SMPTE 274M, which are defined by the Society of Motion Picture and Television Engineers, SMPTE. 1. HDTV impact on video surveillance market This development is now starting to have an impact on the video surveillance market, as customers ask for higher image quality standard. The possibility of clearer, sharper images is a long sought quality in the surveillance industry, i.e. in applications where objects are moving or accurate identification is vital. It can be argued that some of these requirements can be met with megapixel network cameras. How- ever the notion of “megapixel” is not a recognized standard but rather an adaptation of the industry’s best practices and it refers specifically to the number of image sensor elements of the digital camera.
    [Show full text]
  • Video Processor, Video Upconversion & Signal Switching
    81LumagenReprint 3/1/04 1:01 PM Page 1 Equipment Review Lumagen VisionPro™ Video Processor, Video Upconversion & Signal Switching G REG R OGERS Lumagen VisionPro™ Reviewer’s Choice The Lumagen VisionPro™ Video Processor is the type of product that I like to review. First and foremost, it delivers excep- tional performance. Second, it’s an out- standing value. It provides extremely flexi- ble scaling functions and valuable input switching that isn’t included on more expen- sive processors. Third, it works as adver- tised, without frustrating bugs or design errors that compromise video quality or ren- Specifications: der important features inoperable. Inputs: Eight Programmable Inputs (BNC); Composite (Up To 8), S-Video (Up To 8), Manufactured In The U.S.A. By: Component (Up To 4), Pass-Through (Up To 2), “...blends outstanding picture SDI (Optional) Lumagen, Inc. Outputs: YPbPr/RGB (BNC) 15075 SW Koll Parkway, Suite A quality with extremely Video Processing: 3:2 & 2:2 Pulldown Beaverton, Oregon 97006 Reconstruction, Per-Pixel Motion-Adaptive Video Tel: 866 888 3330 flexible scaling functions...” Deinterlacing, Detail-Enhancing Resolution www.lumagen.com Scaling Output Resolutions: 480p To 1080p In Scan Line Product Overview Increments, Plus 1080i Dimensions (WHD Inches): 17 x 3-1/2 x 10-1/4 Price: $1,895; SDI Input Option, $400 The VisionPro ($1,895) provides two important video functions—upconversion and source switching. The versatile video processing algorithms deliver extensive more to upconversion than scaling. Analog rithms to enhance edge sharpness while control over input and output formats. Video source signals must be digitized, and stan- virtually eliminating edge-outlining artifacts.
    [Show full text]
  • High-Quality Spatial Interpolation of Interlaced Video
    High-Quality Spatial Interpolation of Interlaced Video Alexey Lukin Laboratory of Mathematical Methods of Image Processing Department of Computational Mathematics and Cybernetics Moscow State University, Moscow, Russia [email protected] Abstract Deinterlacing is the process of converting of interlaced-scan video sequences into progressive scan format. It involves interpolating missing lines of video data. This paper presents a new algorithm of spatial interpolation that can be used as a part of more com- plex motion-adaptive or motion-compensated deinterlacing. It is based on edge-directional interpolation, but adds several features to improve quality and robustness: spatial averaging of directional derivatives, ”soft” mixing of interpolation directions, and use of several interpolation iterations. High quality of the proposed algo- rithm is demonstrated by visual comparison and PSNR measure- ments. Keywords: deinterlacing, edge-directional interpolation, intra- field interpolation. 1 INTRODUCTION (a) (b) Interlaced scan (or interlacing) is a technique invented in 1930-ies to improve smoothness of motion in video without increasing the bandwidth. It separates a video frame into 2 fields consisting of Figure 1: a: ”Bob” deinterlacing (line averaging), odd and even raster lines. Fields are updated on a screen in alter- b: ”weave” deinterlacing (field insertion). nating manner, which permits updating them twice as fast as when progressive scan is used, allowing capturing motion twice as often. Interlaced scan is still used in most television systems, including able, it is estimated from the video sequence. certain HDTV broadcast standards. In this paper, a new high-quality method of spatial interpolation However, many television and computer displays nowadays are of video frames in suggested.
    [Show full text]
  • Exposing Digital Forgeries in Interlaced and De-Interlaced Video Weihong Wang, Student Member, IEEE, and Hany Farid, Member, IEEE
    1 Exposing Digital Forgeries in Interlaced and De-Interlaced Video Weihong Wang, Student Member, IEEE, and Hany Farid, Member, IEEE Abstract With the advent of high-quality digital video cameras and sophisticated video editing software, it is becoming increasingly easier to tamper with digital video. A growing number of video surveillance cameras are also giving rise to an enormous amount of video data. The ability to ensure the integrity and authenticity of this data poses considerable challenges. We describe two techniques for detecting traces of tampering in de-interlaced and interlaced video. For de-interlaced video, we quantify the correlations introduced by the camera or software de-interlacing algorithms and show how tampering can disturb these correlations. For interlaced video, we show that the motion between fields of a single frame and across fields of neighboring frames should be equal. We propose an efficient way to measure these motions and show how tampering can disturb this relationship. I. INTRODUCTION Popular websites such as YouTube have given rise to a proliferation of digital video. Combined with increasingly sophisticated users equipped with cellphones and digital cameras that can record video, the Internet is awash with digital video. When coupled with sophisticated video editing software, we have begun to see an increase in the number and quality of doctored video. While the past few years has seen considerable progress in the area of digital image forensics (e.g., [1], [2], [3], [4], [5], [6], [7]), less attention has been payed to digital video forensics. In one of the only papers in this area, we previously described a technique for detecting double MPEG compression [8].
    [Show full text]
  • A Guide to Video Standards
    Guide to Video Standards SBS Technologies 05.20.2005 Introduction This overview of video standards, methods, and system design factors provides an historical perspective, starting with the advent of television half a century ago, and continuing up to today’s latest emerging video standards. Because some applications involve retrofitting new technology to existing systems, standards encountered can be from the earliest mentioned to the latest. © 2005 SBS Technologies, Inc., All rights reserved. 1 Entdecken Sie weitere interessante Artikel und News zum Thema auf all-electronics.de! Hier klicken & informieren! Analog Video In the Beginning: NTSC/ RS-170 The very earliest video standard was created in the late 1930s for television in the U.S., and this standard still serves as the foundation for all video today. This method, which later became standardized in EIA RS-170, involved sending video one line at a time, from left to right from the top left corner of the image. Altogether, 525 horizontal lines (of which 480 are active video content) were sent directly from the camera, through the broadcast gear, onto the television’s CRT in millions of homes, all synchronized. To capture motion well, these 525 lines were sent at a rate of 30 frames per second (which is faster than standard motion picture rates of 24 frames/second). Because CRT’s flicker badly when refreshed at only 30 frames per second, a method called interlacing was used. Interlaced video causes less visible display flickering on a CRT monitor than non-interlaced methods by alternating between drawing the even-numbered lines and the odd-numbered lines of each picture.
    [Show full text]
  • High Definition Technology
    Dr. H.B.Kekre et al. / International Journal of Engineering Science and Technology (IJEST) HIGH DEFINITON TECHNOLOGY:A REVIEW DR. H.B.KEKRE Senior Professor, Computer Engineering Department, MPSTME, SVKM’s NMIMS University, Mumbai-56, INDIA DHIRENDRA MISHRA Associate Professor, Computer Engineering Department, MPSTME, SVKM’s NMIMS University, Mumbai-56, INDIA YASH SHAH Student, Computer Engineering MPSTME, SVKM’s NMIMS University, Mumbai-56, INDIA MAUNIK DESAI Student, Computer Engineering MPSTME, SVKM’s NMIMS University, Mumbai-56, INDIA PARAS VORA Student, Computer Engineering MPSTME, SVKM’s NMIMS University, Mumbai-56, INDIA ABSTRACT This is a review paper describing the characteristics and benefits of high definition (HD) technology. Digital techniques offer greater accuracy and stability, with better signal to noise ratios than analogue method. Here the overview of High Definition is presented; basic terminology, working, fundamentals, applications and future of this technology are listed. The scanning methods have been explained also software and hardware architecture is mentioned. The analysis of the current HD market and a commercial survey of the HD services and its providers have been carried out. Then the future of High Definition is considered with new research directions. If we narrow down the issue to a single parameter, that of resolution, aside from possible future displays that are integer multiples of 1920 x 1080 serving to diminish pixel structure then, claims of “live-the-picture” and “feel- the-picture” would become a reality. Keywords: HD; Pixels; Interlaced scan; Progressive scan; Blu-ray; HDMI; Ready 3D; Real HD; Aspect Ratio; Retina display. 1. Introduction On 2nd November 1936, BBC began transmitting the world's first high definition service from the Victorian Alexandra Palace in north London; this is the birthplace of HD television broadcasting [1].
    [Show full text]
  • Deinterlacing Network for Early Interlaced Videos
    1 Rethinking deinterlacing for early interlaced videos Yang Zhao, Wei Jia, Ronggang Wang Abstract—In recent years, high-definition restoration of early videos have received much attention. Real-world interlaced videos usually contain various degradations mixed with interlacing artifacts, such as noises and compression artifacts. Unfortunately, traditional deinterlacing methods only focus on the inverse process of interlacing scanning, and cannot remove these complex and complicated artifacts. Hence, this paper proposes an image deinterlacing network (DIN), which is specifically designed for joint removal of interlacing mixed with other artifacts. The DIN is composed of two stages, i.e., a cooperative vertical interpolation stage for splitting and fully using the information of adjacent fields, and a field-merging stage to perceive movements and suppress ghost artifacts. Experimental results demonstrate the effectiveness of the proposed DIN on both synthetic and real- world test sets. Fig. 1. Illustration of the interlaced scanning mechanism. Index Terms—deinterlacing, early videos, interlacing artifacts this paper is to specifically design an effective deinterlacing network for the joint restoration tasks of interlaced frames. I. INTRODUCTION The traditional interlaced scanning mechanism can be de- Interlacing artifacts are commonly observed in many early fined as Y = S(X1; X2), where Y denotes the interlaced videos, which are caused by interlacing scanning in early frame, S(·) is the interlaced scanning function, and X1; X2 television systems, e.g., NTSC, PAL, and SECAM. As shown denote the odd and even fields. Traditional deinterlacing in Fig. 1, the odd lines and even lines of an interlaced frame are methods focus on the reversed process of S(·), which can scanned from two different half-frames, i.e., the odd/top/first be roughly divided into four categories, i.e., temporal inter- field and the even/bottom/second field.
    [Show full text]